-
Academic Article Recommendation Using Multiple Perspectives
Authors:
Kenneth Church,
Omar Alonso,
Peter Vickers,
Jiameng Sun,
Abteen Ebrahimi,
Raman Chandrasekar
Abstract:
We argue that Content-based filtering (CBF) and Graph-based methods (GB) complement one another in Academic Search recommendations. The scientific literature can be viewed as a conversation between authors and the audience. CBF uses abstracts to infer authors' positions, and GB uses citations to infer responses from the audience. In this paper, we describe nine differences between CBF and GB, as w…
▽ More
We argue that Content-based filtering (CBF) and Graph-based methods (GB) complement one another in Academic Search recommendations. The scientific literature can be viewed as a conversation between authors and the audience. CBF uses abstracts to infer authors' positions, and GB uses citations to infer responses from the audience. In this paper, we describe nine differences between CBF and GB, as well as synergistic opportunities for hybrid combinations. Two embeddings will be used to illustrate these opportunities: (1) Specter, a CBF method based on BERT-like deepnet encodings of abstracts, and (2) ProNE, a GB method based on spectral clustering of more than 200M papers and 2B citations from Semantic Scholar.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Improving Computational Efficiency in DSMC Simulations of Vacuum Gas Dynamics with a Fixed Number of Particles per Cell
Authors:
Moslem Sabouri,
Ramin Zakeri,
Amin Ebrahimi
Abstract:
The present study addresses the challenge of enhancing computational efficiency without compromising accuracy in numerical simulations of vacuum gas dynamics using the direct simulation Monte Carlo (DSMC) method. A technique termed "fixed particle per cell (FPPC)" was employed, which enforces a fixed number of simulator particles across all computational cells. The proposed technique eliminates th…
▽ More
The present study addresses the challenge of enhancing computational efficiency without compromising accuracy in numerical simulations of vacuum gas dynamics using the direct simulation Monte Carlo (DSMC) method. A technique termed "fixed particle per cell (FPPC)" was employed, which enforces a fixed number of simulator particles across all computational cells. The proposed technique eliminates the need for real-time adjustment of particle weights during simulation, reducing calculation time. Using the SPARTA solver, simulations of rarefied gas flow in a micromixer and rarefied supersonic airflow around a cylinder were conducted to validate the proposed technique. Results demonstrate that applying the FPPC technique effectively reduces computational costs while yielding results comparable to conventional DSMC implementations. Additionally, the application of local grid refinement coupled with the FPPC technique was investigated. The results show that integrating local grid refinement with the FPPC technique enables accurate prediction of flow behaviour in regions with significant gradients. These findings highlight the efficacy of the proposed technique in improving the accuracy and efficiency of numerical simulations of complex vacuum gas dynamics at a reduced computational cost.
△ Less
Submitted 22 June, 2024;
originally announced July 2024.
-
Shower Separation in Five Dimensions for Highly Granular Calorimeters using Machine Learning
Authors:
S. Lai,
J. Utehs,
A. Wilhahn,
M. C. Fouz,
O. Bach,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Göttlicher,
O. Hartbrich,
D. Heuchel,
A. Irles,
K. Krüger,
J. Kvasnicka,
S. Lu,
C. Neubüser,
A. Provenza,
M. Reinecke,
F. Sefkow,
S. Schuwalow,
M. De Silva,
Y. Sudo,
H. L. Tran,
L. Liu,
R. Masuda
, et al. (26 additional authors not shown)
Abstract:
To achieve state-of-the-art jet energy resolution for Particle Flow, sophisticated energy clustering algorithms must be developed that can fully exploit available information to separate energy deposits from charged and neutral particles. Three published neural network-based shower separation models were applied to simulation and experimental data to measure the performance of the highly granular…
▽ More
To achieve state-of-the-art jet energy resolution for Particle Flow, sophisticated energy clustering algorithms must be developed that can fully exploit available information to separate energy deposits from charged and neutral particles. Three published neural network-based shower separation models were applied to simulation and experimental data to measure the performance of the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL) technological prototype in distinguishing the energy deposited by a single charged and single neutral hadron for Particle Flow. The performance of models trained using only standard spatial and energy and charged track position information from an event was compared to models trained using timing information available from AHCAL, which is expected to improve sensitivity to shower development and, therefore, aid in clustering. Both simulation and experimental data were used to train and test the models and their performances were compared. The best-performing neural network achieved significantly superior event reconstruction when timing information was utilised in training for the case where the charged hadron had more energy than the neutral one, motivating temporally sensitive calorimeters. All models under test were observed to tend to allocate energy deposited by the more energetic of the two showers to the less energetic one. Similar shower reconstruction performance was observed for a model trained on simulation and applied to data and a model trained and applied to data.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
Distributed Quantum Computing in Silicon
Authors:
Photonic Inc,
:,
Francis Afzal,
Mohsen Akhlaghi,
Stefanie J. Beale,
Olinka Bedroya,
Kristin Bell,
Laurent Bergeron,
Kent Bonsma-Fisher,
Polina Bychkova,
Zachary M. E. Chaisson,
Camille Chartrand,
Chloe Clear,
Adam Darcie,
Adam DeAbreu,
Colby DeLisle,
Lesley A. Duncan,
Chad Dundas Smith,
John Dunn,
Amir Ebrahimi,
Nathan Evetts,
Daker Fernandes Pinheiro,
Patricio Fuentes,
Tristen Georgiou,
Biswarup Guha
, et al. (47 additional authors not shown)
Abstract:
Commercially impactful quantum algorithms such as quantum chemistry and Shor's algorithm require a number of qubits and gates far beyond the capacity of any existing quantum processor. Distributed architectures, which scale horizontally by networking modules, provide a route to commercial utility and will eventually surpass the capability of any single quantum computing module. Such processors con…
▽ More
Commercially impactful quantum algorithms such as quantum chemistry and Shor's algorithm require a number of qubits and gates far beyond the capacity of any existing quantum processor. Distributed architectures, which scale horizontally by networking modules, provide a route to commercial utility and will eventually surpass the capability of any single quantum computing module. Such processors consume remote entanglement distributed between modules to realize distributed quantum logic. Networked quantum computers will therefore require the capability to rapidly distribute high fidelity entanglement between modules. Here we present preliminary demonstrations of some key distributed quantum computing protocols on silicon T centres in isotopically-enriched silicon. We demonstrate the distribution of entanglement between modules and consume it to apply a teleported gate sequence, establishing a proof-of-concept for T centres as a distributed quantum computing and networking platform.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Understanding Disorder in Monolayer Graphene Devices with Gate-Defined Superlattices
Authors:
Vinay Kammarchedu,
Derrick Butler,
Asmaul Smitha Rashid,
Aida Ebrahimi,
Morteza Kayyalha
Abstract:
Engineering superlattices (SLs) - which are spatially periodic potential landscapes for electrons - is an emerging approach for the realization of exotic properties, including superconductivity and correlated insulators, in two-dimensional materials. While moiré SL engineering has been a popular approach, nanopatterning is an attractive alternative offering control over the pattern and wavelength…
▽ More
Engineering superlattices (SLs) - which are spatially periodic potential landscapes for electrons - is an emerging approach for the realization of exotic properties, including superconductivity and correlated insulators, in two-dimensional materials. While moiré SL engineering has been a popular approach, nanopatterning is an attractive alternative offering control over the pattern and wavelength of the SL. However, the disorder arising in the system due to imperfect nanopatterning is seldom studied. Here, by creating a square lattice of nanoholes in the $SiO_2$ dielectric layer using nanolithography, we study the superlattice potential and the disorder formed in hBN-graphene-hBN heterostructures. Specifically, we observe that while electrical transport shows distinct superlattice satellite peaks, the disorder of the device is significantly higher than graphene devices without any SL. We use finite-element simulations combined with a resistor network model to calculate the effects of this disorder on the transport properties of graphene. We consider three types of disorder: nanohole size variations, adjacent nanohole mergers, and nanohole vacancies. Comparing our experimental results with the model, we find that the disorder primarily originates from nanohole size variations rather than nanohole mergers in square SLs. We further confirm the validity of our model by comparing the results with quantum transport simulations. Our findings highlight the applicability of our simple framework to predict and engineer disorder in patterned SLs, specifically correlating variations in the resultant SL patterns to the observed disorder. Our combined experimental and theoretical results could serve as a valuable guide for optimizing nanofabrication processes to engineer disorder in nanopatterned SLs.
△ Less
Submitted 16 August, 2024; v1 submitted 11 April, 2024;
originally announced April 2024.
-
Since the Scientific Literature Is Multilingual, Our Models Should Be Too
Authors:
Abteen Ebrahimi,
Kenneth Church
Abstract:
English has long been assumed the $\textit{lingua franca}$ of scientific research, and this notion is reflected in the natural language processing (NLP) research involving scientific document representation. In this position piece, we quantitatively show that the literature is largely multilingual and argue that current models and benchmarks should reflect this linguistic diversity. We provide evi…
▽ More
English has long been assumed the $\textit{lingua franca}$ of scientific research, and this notion is reflected in the natural language processing (NLP) research involving scientific document representation. In this position piece, we quantitatively show that the literature is largely multilingual and argue that current models and benchmarks should reflect this linguistic diversity. We provide evidence that text-based models fail to create meaningful representations for non-English papers and highlight the negative user-facing impacts of using English-only models non-discriminately across a multilingual domain. We end with suggestions for the NLP community on how to improve performance on non-English documents.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Software Compensation for Highly Granular Calorimeters using Machine Learning
Authors:
S. Lai,
J. Utehs,
A. Wilhahn,
O. Bach,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Göttlicher,
O. Hartbrich,
D. Heuchel,
A. Irles,
K. Krüger,
J. Kvasnicka,
S. Lu,
C. Neubüser,
A. Provenza,
M. Reinecke,
F. Sefkow,
S. Schuwalow,
M. De Silva,
Y. Sudo,
H. L. Tran,
E. Buhmann,
E. Garutti,
S. Huck
, et al. (39 additional authors not shown)
Abstract:
A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy w…
▽ More
A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy weighting and a time-dependent threshold for enhancing energy deposits consistent with the timescale of evaporation neutrons. Additionally, it was observed to learn an energy-weighting indicative of longitudinal leakage correction. In addition, the method produced a linear detector response and outperformed a published control method regarding resolution for every particle energy studied.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Pulmonologists-Level lung cancer detection based on standard blood test results and smoking status using an explainable machine learning approach
Authors:
Ricco Noel Hansen Flyckt,
Louise Sjodsholm,
Margrethe Høstgaard Bang Henriksen,
Claus Lohman Brasen,
Ali Ebrahimi,
Ole Hilberg,
Torben Frøstrup Hansen,
Uffe Kock Wiil,
Lars Henrik Jensen,
Abdolrahman Peimankar
Abstract:
Lung cancer (LC) remains the primary cause of cancer-related mortality, largely due to late-stage diagnoses. Effective strategies for early detection are therefore of paramount importance. In recent years, machine learning (ML) has demonstrated considerable potential in healthcare by facilitating the detection of various diseases. In this retrospective development and validation study, we develope…
▽ More
Lung cancer (LC) remains the primary cause of cancer-related mortality, largely due to late-stage diagnoses. Effective strategies for early detection are therefore of paramount importance. In recent years, machine learning (ML) has demonstrated considerable potential in healthcare by facilitating the detection of various diseases. In this retrospective development and validation study, we developed an ML model based on dynamic ensemble selection (DES) for LC detection. The model leverages standard blood sample analysis and smoking history data from a large population at risk in Denmark. The study includes all patients examined on suspicion of LC in the Region of Southern Denmark from 2009 to 2018. We validated and compared the predictions by the DES model with diagnoses provided by five pulmonologists. Among the 38,944 patients, 9,940 had complete data of which 2,505 (25\%) had LC. The DES model achieved an area under the roc curve of 0.77$\pm$0.01, sensitivity of 76.2\%$\pm$2.4\%, specificity of 63.8\%$\pm$2.3\%, positive predictive value of 41.6\%$\pm$1.2\%, and F\textsubscript{1}-score of 53.8\%$\pm$1.1\%. The DES model outperformed all five pulmonologists, achieving a sensitivity 9\% higher than their average. The model identified smoking status, age, total calcium levels, neutrophil count, and lactate dehydrogenase as the most important factors for the detection of LC. The results highlight the successful application of the ML approach in detecting LC, surpassing pulmonologists' performance. Incorporating clinical and laboratory data in future risk assessment models can improve decision-making and facilitate timely referrals.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
Revealing the effects of laser beam shaping on melt pool behaviour in conduction-mode laser melting
Authors:
Amin Ebrahimi,
Mohammad Sattari,
Aravind Babu,
Arjun Sood,
Gert-willem Römer,
Marcel Hermans
Abstract:
Laser beam shaping offers remarkable possibilities to control and optimise process stability and tailor material properties and structure in laser-based welding and additive manufacturing. However, little is known about the influence of laser beam shaping on the complex melt-pool behaviour, solidified melt-track bead profile and microstructural grain morphology in laser material processing. A simu…
▽ More
Laser beam shaping offers remarkable possibilities to control and optimise process stability and tailor material properties and structure in laser-based welding and additive manufacturing. However, little is known about the influence of laser beam shaping on the complex melt-pool behaviour, solidified melt-track bead profile and microstructural grain morphology in laser material processing. A simulation-based approach is utilised in the present work to study the effects of laser beam intensity profile and angle of incidence on the melt-pool behaviour in conduction-mode laser melting of stainless steel 316L plates. The present high-fidelity physics-based computational model accounts for crucial physical phenomena in laser material processing such as complex laser-matter interaction, solidification and melting, heat and fluid flow dynamics, and free-surface oscillations. Experiments were carried out using different laser beam shapes and the validity of the numerical predictions is demonstrated. The results indicate that for identical processing parameters, reshaping the laser beam leads to notable changes in the thermal and fluid flow fields in the melt pool, affecting the melt-track bead profile and solidification microstructure. The columnar-to-equiaxed transition is discussed for different laser-intensity profiles.
△ Less
Submitted 12 November, 2023;
originally announced November 2023.
-
Computational Study of Rarefied Gas Flow and Heat Transfer in Lid-driven Cylindrical Cavities
Authors:
Mengbo Zhu,
Ehsan Roohi,
Amin Ebrahimi
Abstract:
The gas flow characteristics in lid-driven cavities are influenced by several factors, such as cavity geometry, gas properties, and boundary conditions. In this study, the physics of heat and gas flow in cylindrical lid-driven cavities with various cross-sections, including fully or partially rounded edges, is investigated through numerical simulations using the direct simulation Monte Carlo (DSMC…
▽ More
The gas flow characteristics in lid-driven cavities are influenced by several factors, such as cavity geometry, gas properties, and boundary conditions. In this study, the physics of heat and gas flow in cylindrical lid-driven cavities with various cross-sections, including fully or partially rounded edges, is investigated through numerical simulations using the direct simulation Monte Carlo (DSMC) and the discrete unified gas kinetic scheme (DUGKS) methods. The thermal and fluid flow fields are systematically studied for both constant and oscillatory lid velocities, for various degrees of gas rarefaction ranging from the slip to the free-molecular regimes. The impact of expansion cooling and viscous dissipation on the thermal and flow fields, as well as the occurrence of counter-gradient heat transfer (also known as anti-Fourier heat transfer) under non-equilibrium conditions, are explained based on the results obtained from numerical simulations. Furthermore, the influence of the incomplete tangential accommodation coefficient on the thermal and fluid flow fields is discussed. A comparison is made between the thermal and fluid flow fields predicted in cylindrical cavities and those in square-shaped cavities. The present work contributes to the advancement of micro/nano-electromechanical systems (MEMS/NEMS) by providing valuable insights into rarefied gas flow and heat transfer in lid-driven cavities.
△ Less
Submitted 16 May, 2023;
originally announced June 2023.
-
High-throughput Cotton Phenotyping Big Data Pipeline Lambda Architecture Computer Vision Deep Neural Networks
Authors:
Amanda Issac,
Alireza Ebrahimi,
Javad Mohammadpour Velni,
Glen Rains
Abstract:
In this study, we propose a big data pipeline for cotton bloom detection using a Lambda architecture, which enables real-time and batch processing of data. Our proposed approach leverages Azure resources such as Data Factory, Event Grids, Rest APIs, and Databricks. This work is the first to develop and demonstrate the implementation of such a pipeline for plant phenotyping through Azure's cloud co…
▽ More
In this study, we propose a big data pipeline for cotton bloom detection using a Lambda architecture, which enables real-time and batch processing of data. Our proposed approach leverages Azure resources such as Data Factory, Event Grids, Rest APIs, and Databricks. This work is the first to develop and demonstrate the implementation of such a pipeline for plant phenotyping through Azure's cloud computing service. The proposed pipeline consists of data preprocessing, object detection using a YOLOv5 neural network model trained through Azure AutoML, and visualization of object detection bounding boxes on output images. The trained model achieves a mean Average Precision (mAP) score of 0.96, demonstrating its high performance for cotton bloom classification. We evaluate our Lambda architecture pipeline using 9000 images yielding an optimized runtime of 34 minutes. The results illustrate the scalability of the proposed pipeline as a solution for deep learning object detection, with the potential for further expansion through additional Azure processing cores. This work advances the scientific research field by providing a new method for cotton bloom detection on a large dataset and demonstrates the potential of utilizing cloud computing resources, specifically Azure, for efficient and accurate big data processing in precision agriculture.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Meeting the Needs of Low-Resource Languages: The Value of Automatic Alignments via Pretrained Models
Authors:
Abteen Ebrahimi,
Arya D. McCarthy,
Arturo Oncevay,
Luis Chiruzzo,
John E. Ortega,
Gustavo A. Giménez-Lugo,
Rolando Coto-Solano,
Katharina Kann
Abstract:
Large multilingual models have inspired a new class of word alignment methods, which work well for the model's pretraining languages. However, the languages most in need of automatic alignment are low-resource and, thus, not typically included in the pretraining data. In this work, we ask: How do modern aligners perform on unseen languages, and are they better than traditional methods? We contribu…
▽ More
Large multilingual models have inspired a new class of word alignment methods, which work well for the model's pretraining languages. However, the languages most in need of automatic alignment are low-resource and, thus, not typically included in the pretraining data. In this work, we ask: How do modern aligners perform on unseen languages, and are they better than traditional methods? We contribute gold-standard alignments for Bribri--Spanish, Guarani--Spanish, Quechua--Spanish, and Shipibo-Konibo--Spanish. With these, we evaluate state-of-the-art aligners with and without model adaptation to the target language. Finally, we also evaluate the resulting alignments extrinsically through two downstream tasks: named entity recognition and part-of-speech tagging. We find that although transformer-based methods generally outperform traditional models, the two classes of approach remain competitive with each other.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
The Effect of Groove Shape on Molten Metal Flow Behaviour in Gas Metal Arc Welding
Authors:
Amin Ebrahimi,
Aravind Babu,
Chris R. Kleijn,
Marcel J. M. Hermans,
Ian M. Richardson
Abstract:
One of the challenges for development, qualification and optimisation of arc welding processes lies in characterising the complex melt-pool behaviour which exhibits highly non-linear responses to variations of process parameters. The present work presents a simulation-based approach to describe the melt-pool behaviour in root-pass gas metal arc welding (GMAW). Three-dimensional numerical simulatio…
▽ More
One of the challenges for development, qualification and optimisation of arc welding processes lies in characterising the complex melt-pool behaviour which exhibits highly non-linear responses to variations of process parameters. The present work presents a simulation-based approach to describe the melt-pool behaviour in root-pass gas metal arc welding (GMAW). Three-dimensional numerical simulations have been performed using an enhanced physics-based computational model to unravel the effect of groove shape on complex unsteady heat and fluid flow in GMAW. The influence of surface deformations on power-density distribution and the forces applied to the molten material was taken into account. Utilising this model, the complex heat and fluid flow in melt pools were visualised and described for different groove shapes. Additionally, experiments were performed to validate the numerical predictions and the robustness of the present computational model is demonstrated. The model can be used to explore physical effects of governing fluid flow and melt-pool stability during gas metal arc root welding.
△ Less
Submitted 13 December, 2021;
originally announced January 2022.
-
The influence of laser characteristics on internal flow behaviour in laser melting of metallic substrates
Authors:
Amin Ebrahimi,
Mohammad Sattari,
Scholte J. L. Bremer,
Martin Luckabauer,
Gert-willem R. B. E. Römer,
Ian M. Richardson,
Chris R. Kleijn,
Marcel J. M. Hermans
Abstract:
The absorptivity of a material is a major uncertainty in numerical simulations of laser welding and additive manufacturing, and its value is often calibrated through trial-and-error exercises. This adversely affects the capability of numerical simulations when predicting the process behaviour and can eventually hinder the exploitation of fully digitised manufacturing processes, which is a goal of…
▽ More
The absorptivity of a material is a major uncertainty in numerical simulations of laser welding and additive manufacturing, and its value is often calibrated through trial-and-error exercises. This adversely affects the capability of numerical simulations when predicting the process behaviour and can eventually hinder the exploitation of fully digitised manufacturing processes, which is a goal of "industry 4.0". In the present work, an enhanced absorption model that takes into account the effects of laser characteristics, incident angle, surface temperature, and material composition is utilised to predict internal heat and fluid flow in laser melting of stainless steel 316L. Employing such an absorption model is physically more realistic than assuming a constant absorptivity and can reduce the costs associated with calibrating an appropriate value. High-fidelity three-dimensional numerical simulations were performed using both variable and constant absorptivity models and the predictions compared with experimental data. The results of the present work unravel the crucial effect of absorptivity on the physics of internal flow in laser material processing. The difference between melt-pool shapes obtained using fibre and CO$_2$ laser sources is explained, and factors affecting the local energy absorption are discussed.
△ Less
Submitted 5 January, 2022;
originally announced January 2022.
-
Neuron-based Pruning of Deep Neural Networks with Better Generalization using Kronecker Factored Curvature Approximation
Authors:
Abdolghani Ebrahimi,
Diego Klabjan
Abstract:
Existing methods of pruning deep neural networks focus on removing unnecessary parameters of the trained network and fine tuning the model afterwards to find a good solution that recovers the initial performance of the trained model. Unlike other works, our method pays special attention to the quality of the solution in the compressed model and inference computation time by pruning neurons. The pr…
▽ More
Existing methods of pruning deep neural networks focus on removing unnecessary parameters of the trained network and fine tuning the model afterwards to find a good solution that recovers the initial performance of the trained model. Unlike other works, our method pays special attention to the quality of the solution in the compressed model and inference computation time by pruning neurons. The proposed algorithm directs the parameters of the compressed model toward a flatter solution by exploring the spectral radius of Hessian which results in better generalization on unseen data. Moreover, the method does not work with a pre-trained network and performs training and pruning simultaneously. Our result shows that it improves the state-of-the-art results on neuron compression. The method is able to achieve very small networks with small accuracy degradation across different neural network models.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
Depth-dependent charge collection profile of pad diodes
Authors:
Mohammadtaghi Hajheidari,
Erika Garutti,
Joern Schwandt,
Aliakbar Ebrahimi
Abstract:
The collected charge of two pad diodes is measured along the diode width using a 5:2 GeV electron beam at the DESY II beam test facility. The electron beam enters parallel to the readout electrode plane and perpendicular to the edge of the diode. The position of the electron beam is reconstructed by three planes of an EUDET-type telescope. An in-situ procedure is developed to align the diode surfa…
▽ More
The collected charge of two pad diodes is measured along the diode width using a 5:2 GeV electron beam at the DESY II beam test facility. The electron beam enters parallel to the readout electrode plane and perpendicular to the edge of the diode. The position of the electron beam is reconstructed by three planes of an EUDET-type telescope. An in-situ procedure is developed to align the diode surface parallel to the electron beam. The result of these measurements is the charge collection efficiency profile as a function of depth for each diode. For a non-irradiated diode, the charge profile is uniform as a function of the beam position for bias voltages above the full-depletion, as expected. For the irradiated diode, the charge profile is non-uniform and changes as a function of bias voltage.
△ Less
Submitted 15 December, 2021; v1 submitted 7 August, 2021;
originally announced August 2021.
-
Position reconstruction for segmented detectors
Authors:
A. Ebrahimi,
F. Feind,
E. Fretwurst,
E. Garutti,
M. Hajheidari,
R. Klanner,
D. Pitzl,
J. Schwandt,
G. Steinbrueck,
I. Zoi
Abstract:
The topic of the paper is the position reconstruction from signals of segmented detectors. With the help of a simple simulation, it is shown that the position reconstruction using the centre-of-gravity method is strongly biased, if the width of the charge (or e.g. light) distribution at the electrodes (or photo detectors) is less than the read-out pitch. A method is proposed which removes this bia…
▽ More
The topic of the paper is the position reconstruction from signals of segmented detectors. With the help of a simple simulation, it is shown that the position reconstruction using the centre-of-gravity method is strongly biased, if the width of the charge (or e.g. light) distribution at the electrodes (or photo detectors) is less than the read-out pitch. A method is proposed which removes this bias for events with signals in two or more read-out channels and thereby improves the position resolution. The method also provides an estimate of the position-response function for every event. Examples are given for which its width as a function of the reconstructed position varies by as much as an order of magnitude.
A fast Monte Carlo program is described which simulates the signals from a silicon pixel detector traversed by charged particles under different angles, and the results obtained with the proposed reconstruction method and with the centre-of-gravity method are compared. The simulation includes the local energy-loss fluctuations, the position-dependent electric field, the diffusion of the charge carriers, the electronics noise and charge thresholds for clustering. A comparison to test-beam-data is used to validate the simulation.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Position resolution with 25 um pitch pixel sensors before and after irradiation
Authors:
I. Zoi,
A. Ebrahimi,
F. Feindt,
E. Garutti,
P. Gunnellini,
A. Hinzmann,
C. Niemeyer,
D. Pitzl,
J. Schwandt,
G. Steinbrück
Abstract:
Pixelated silicon detectors are state-of-the-art technology to achieve precise tracking and vertexing at collider experiments, designed to accurately measure the hit position of incoming particles in high rate and radiation environments. The detector requirements become extremely demanding for operation at the High-Luminosity LHC, where up to 200 interactions will overlap in the same bunch crossin…
▽ More
Pixelated silicon detectors are state-of-the-art technology to achieve precise tracking and vertexing at collider experiments, designed to accurately measure the hit position of incoming particles in high rate and radiation environments. The detector requirements become extremely demanding for operation at the High-Luminosity LHC, where up to 200 interactions will overlap in the same bunch crossing on top of the process of interest. Additionally, fluences up to 2.3 10^16 cm^-2 1 MeV neutron equivalent at 3.0 cm distance from the beam are expected for an integrated luminosity of 3000 fb^-1. In the last decades, the pixel pitch has constantly been reduced to cope with the experiment's needs of achieving higher position resolution and maintaining low pixel occupancy per channel. The spatial resolution improves with a decreased pixel size but it degrades with radiation damage. Therefore, prototype sensor modules for the upgrade of the experiments at the HL-LHC need to be tested after being irradiated. This paper describes position resolution measurements on planar prototype sensors with 100x25 um^2 pixels for the CMS Phase-2 Upgrade. It reviews the dependence of the position resolution on the relative inclination angle between the incoming particle trajectory and the sensor, the charge threshold applied by the readout chip, and the bias voltage. A precision setup with three parallel planes of sensors has been used to investigate the performance of sensors irradiated to fluences up to F_eq = 3.6 10^15 cm-2. The measurements were performed with a 5 GeV electron beam. A spatial resolution of 3.2 +\- 0.1 um is found for non-irradiated sensors, at the optimal angle for charge sharing. The resolution is 5.0 +/- 0.2 um for a proton-irradiated sensor at F_eq = 2.1 10^15 cm-2 and a neutron-irradiated sensor at F_eq = 3.6 10^15 cm^-2.
△ Less
Submitted 9 July, 2021;
originally announced July 2021.
-
How to Adapt Your Pretrained Multilingual Model to 1600 Languages
Authors:
Abteen Ebrahimi,
Katharina Kann
Abstract:
Pretrained multilingual models (PMMs) enable zero-shot learning via cross-lingual transfer, performing best for languages seen during pretraining. While methods exist to improve performance for unseen languages, they have almost exclusively been evaluated using amounts of raw text only available for a small fraction of the world's languages. In this paper, we evaluate the performance of existing m…
▽ More
Pretrained multilingual models (PMMs) enable zero-shot learning via cross-lingual transfer, performing best for languages seen during pretraining. While methods exist to improve performance for unseen languages, they have almost exclusively been evaluated using amounts of raw text only available for a small fraction of the world's languages. In this paper, we evaluate the performance of existing methods to adapt PMMs to new languages using a resource available for over 1600 languages: the New Testament. This is challenging for two reasons: (1) the small corpus size, and (2) the narrow domain. While performance drops for all approaches, we surprisingly still see gains of up to $17.69\%$ accuracy for part-of-speech tagging and $6.29$ F1 for NER on average over all languages as compared to XLM-R. Another unexpected finding is that continued pretraining, the simplest approach, performs best. Finally, we perform a case study to disentangle the effects of domain and size and to shed light on the influence of the finetuning source language.
△ Less
Submitted 3 June, 2021;
originally announced June 2021.
-
NLP-IIS@UT at SemEval-2021 Task 4: Machine Reading Comprehension using the Long Document Transformer
Authors:
Hossein Basafa,
Sajad Movahedi,
Ali Ebrahimi,
Azadeh Shakery,
Heshaam Faili
Abstract:
This paper presents a technical report of our submission to the 4th task of SemEval-2021, titled: Reading Comprehension of Abstract Meaning. In this task, we want to predict the correct answer based on a question given a context. Usually, contexts are very lengthy and require a large receptive field from the model. Thus, common contextualized language models like BERT miss fine representation and…
▽ More
This paper presents a technical report of our submission to the 4th task of SemEval-2021, titled: Reading Comprehension of Abstract Meaning. In this task, we want to predict the correct answer based on a question given a context. Usually, contexts are very lengthy and require a large receptive field from the model. Thus, common contextualized language models like BERT miss fine representation and performance due to the limited capacity of the input tokens. To tackle this problem, we used the Longformer model to better process the sequences. Furthermore, we utilized the method proposed in the Longformer benchmark on Wikihop dataset which improved the accuracy on our task data from 23.01% and 22.95% achieved by the baselines for subtask 1 and 2, respectively, to 70.30% and 64.38%.
△ Less
Submitted 8 May, 2021;
originally announced May 2021.
-
Pressure-driven Nitrogen Flow in Divergent Microchannels with Isothermal Walls
Authors:
Amin Ebrahimi,
Vahid Shahabi,
Ehsan Roohi
Abstract:
Gas flow and heat transfer in confined geometries at micro and nano scales differ considerably from those at macro-scales, mainly due to nonequilibrium effects such as velocity slip and temperature jump. The nonequilibrium effects enhance with a decrease in the characteristic length-scale of the fluid flow or the gas density, leading to the failure of the standard Navier-Stokes-Fourier (NSF) equat…
▽ More
Gas flow and heat transfer in confined geometries at micro and nano scales differ considerably from those at macro-scales, mainly due to nonequilibrium effects such as velocity slip and temperature jump. The nonequilibrium effects enhance with a decrease in the characteristic length-scale of the fluid flow or the gas density, leading to the failure of the standard Navier-Stokes-Fourier (NSF) equations in predicting thermal and fluid flow fields. The direct simulation Monte-Carlo (DSMC) method is employed in the present work to investigate pressure-driven nitrogen flow in divergent microchannels with various divergence angles and isothermal walls. The thermal fields obtained from numerical simulations are analysed for different inlet-to-outlet pressure ratios (1.5 $\leq Π\leq$ 2.5), tangential momentum accommodation coefficients and Knudsen numbers (0.05 $\leq \mathrm{Kn} \leq$ 12.5), covering slip to free-molecular rarefaction regimes. The thermal field in the microchannel is predicted, heat-lines are visualised, and the physics of heat transfer in the microchannel is discussed. Due to the rarefaction effects, the direction of heat flow is largely opposite to that of the mass flow. However, the interplay between thermal and pressure gradients, which are affected by geometrical configurations of the microchannel and applied boundary conditions, determines the net heat flow direction. Additionally, the occurrence of thermal separation and cold-to-hot heat transfer (also known as anti-Fourier heat transfer) in divergent microchannels is explained.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
AmericasNLI: Evaluating Zero-shot Natural Language Understanding of Pretrained Multilingual Models in Truly Low-resource Languages
Authors:
Abteen Ebrahimi,
Manuel Mager,
Arturo Oncevay,
Vishrav Chaudhary,
Luis Chiruzzo,
Angela Fan,
John Ortega,
Ricardo Ramos,
Annette Rios,
Ivan Meza-Ruiz,
Gustavo A. Giménez-Lugo,
Elisabeth Mager,
Graham Neubig,
Alexis Palmer,
Rolando Coto-Solano,
Ngoc Thang Vu,
Katharina Kann
Abstract:
Pretrained multilingual models are able to perform cross-lingual transfer in a zero-shot setting, even for languages unseen during pretraining. However, prior work evaluating performance on unseen languages has largely been limited to low-level, syntactic tasks, and it remains unclear if zero-shot learning of high-level, semantic tasks is possible for unseen languages. To explore this question, we…
▽ More
Pretrained multilingual models are able to perform cross-lingual transfer in a zero-shot setting, even for languages unseen during pretraining. However, prior work evaluating performance on unseen languages has largely been limited to low-level, syntactic tasks, and it remains unclear if zero-shot learning of high-level, semantic tasks is possible for unseen languages. To explore this question, we present AmericasNLI, an extension of XNLI (Conneau et al., 2018) to 10 indigenous languages of the Americas. We conduct experiments with XLM-R, testing multiple zero-shot and translation-based approaches. Additionally, we explore model adaptation via continued pretraining and provide an analysis of the dataset by considering hypothesis-only models. We find that XLM-R's zero-shot performance is poor for all 10 languages, with an average performance of 38.62%. Continued pretraining offers improvements, with an average accuracy of 44.05%. Surprisingly, training on poorly translated data by far outperforms all other methods with an accuracy of 48.72%.
△ Less
Submitted 16 March, 2022; v1 submitted 18 April, 2021;
originally announced April 2021.
-
The Effects of Process Parameters on Melt-pool Oscillatory Behaviour in Gas Tungsten Arc Welding
Authors:
Amin Ebrahimi,
Chris R. Kleijn,
Marcel J. M. Hermans,
Ian M. Richardson
Abstract:
Internal flow behaviour and melt-pool surface oscillations during arc welding are complex and not yet fully understood. In the present work, high-fidelity numerical simulations are employed to describe the effects of welding position, sulphur concentration (60-300 ppm) and travel speed (1.25-5 mm/s) on molten metal flow dynamics in fully-penetrated melt-pools. A wavelet transform is implemented to…
▽ More
Internal flow behaviour and melt-pool surface oscillations during arc welding are complex and not yet fully understood. In the present work, high-fidelity numerical simulations are employed to describe the effects of welding position, sulphur concentration (60-300 ppm) and travel speed (1.25-5 mm/s) on molten metal flow dynamics in fully-penetrated melt-pools. A wavelet transform is implemented to obtain time-resolved frequency spectra of the oscillation signals, which overcomes the shortcomings of the Fourier transform in rendering time resolution of the frequency spectra. Comparing the results of the present numerical calculations with available analytical and experimental datasets, the robustness of the proposed approach in predicting melt-pool oscillations is demonstrated. The results reveal that changes in the surface morphology of the pool resulting from a change in welding position alter the spatial distribution of arc forces and power-density applied to the molten material, and in turn affect flow patterns in the pool. Under similar welding conditions, changing the sulphur concentration affects the Marangoni flow pattern, and increasing the travel speed decreases the size of the pool and increases the offset between top and bottom melt-pool surfaces, affecting the flow structures (vortex formation) on the surface. Variations in the internal flow pattern affect the evolution of melt-pool shape and its surface oscillations.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Vehicle trajectory prediction in top-view image sequences based on deep learning method
Authors:
Zahra Salahshoori Nejad,
Hamed Heravi,
Ali Rahimpour Jounghani,
Abdollah Shahrezaie,
Afshin Ebrahimi
Abstract:
Annually, a large number of injuries and deaths around the world are related to motor vehicle accidents. This value has recently been reduced to some extent, via the use of driver-assistance systems. Developing driver-assistance systems (i.e., automated driving systems) can play a crucial role in reducing this number. Estimating and predicting surrounding vehicles' movement is essential for an aut…
▽ More
Annually, a large number of injuries and deaths around the world are related to motor vehicle accidents. This value has recently been reduced to some extent, via the use of driver-assistance systems. Developing driver-assistance systems (i.e., automated driving systems) can play a crucial role in reducing this number. Estimating and predicting surrounding vehicles' movement is essential for an automated vehicle and advanced safety systems. Moreover, predicting the trajectory is influenced by numerous factors, such as drivers' behavior during accidents, history of the vehicle's movement and the surrounding vehicles, and their position on the traffic scene. The vehicle must move over a safe path in traffic and react to other drivers' unpredictable behaviors in the shortest time. Herein, to predict automated vehicles' path, a model with low computational complexity is proposed, which is trained by images taken from the road's aerial image. Our method is based on an encoder-decoder model that utilizes a social tensor to model the effect of the surrounding vehicles' movement on the target vehicle. The proposed model can predict the vehicle's future path in any freeway only by viewing the images related to the history of the target vehicle's movement and its neighbors. Deep learning was used as a tool for extracting the features of these images. Using the HighD database, an image dataset of the road's aerial image was created, and the model's performance was evaluated on this new database. We achieved the RMSE of 1.91 for the next 5 seconds and found that the proposed method had less error than the best path-prediction methods in previous studies.
△ Less
Submitted 16 May, 2021; v1 submitted 2 February, 2021;
originally announced February 2021.
-
Spotlight-based 3D Instrument Guidance for Retinal Surgery
Authors:
Mingchuan Zhou,
Jiahao Wu,
Ali Ebrahimi,
Niravkumar Patel,
Changyan He,
Peter Gehlbach,
Russell H Taylor,
Alois Knoll,
M Ali Nasseri,
Iulian I Iordachita
Abstract:
Retinal surgery is a complex activity that can be challenging for a surgeon to perform effectively and safely. Image guided robot-assisted surgery is one of the promising solutions that bring significant surgical enhancement in treatment outcome and reduce the physical limitations of human surgeons. In this paper, we demonstrate a novel method for 3D guidance of the instrument based on the project…
▽ More
Retinal surgery is a complex activity that can be challenging for a surgeon to perform effectively and safely. Image guided robot-assisted surgery is one of the promising solutions that bring significant surgical enhancement in treatment outcome and reduce the physical limitations of human surgeons. In this paper, we demonstrate a novel method for 3D guidance of the instrument based on the projection of spotlight in the single microscope images. The spotlight projection mechanism is firstly analyzed and modeled with a projection on both a plane and a sphere surface. To test the feasibility of the proposed method, a light fiber is integrated into the instrument which is driven by the Steady-Hand Eye Robot (SHER). The spot of light is segmented and tracked on a phantom retina using the proposed algorithm. The static calibration and dynamic test results both show that the proposed method can easily archive 0.5 mm of tip-to-surface distance which is within the clinically acceptable accuracy for intraocular visual guidance.
△ Less
Submitted 11 December, 2020;
originally announced December 2020.
-
Athena: Constructing Dialogues Dynamically with Discourse Constraints
Authors:
Vrindavan Harrison,
Juraj Juraska,
Wen Cui,
Lena Reed,
Kevin K. Bowden,
Jiaqi Wu,
Brian Schwarzmann,
Abteen Ebrahimi,
Rishi Rajasekaran,
Nikhil Varghese,
Max Wechsler-Azen,
Steve Whittaker,
Jeffrey Flanigan,
Marilyn Walker
Abstract:
This report describes Athena, a dialogue system for spoken conversation on popular topics and current events. We develop a flexible topic-agnostic approach to dialogue management that dynamically configures dialogue based on general principles of entity and topic coherence. Athena's dialogue manager uses a contract-based method where discourse constraints are dispatched to clusters of response gen…
▽ More
This report describes Athena, a dialogue system for spoken conversation on popular topics and current events. We develop a flexible topic-agnostic approach to dialogue management that dynamically configures dialogue based on general principles of entity and topic coherence. Athena's dialogue manager uses a contract-based method where discourse constraints are dispatched to clusters of response generators. This allows Athena to procure responses from dynamic sources, such as knowledge graph traversals and feature-based on-the-fly response retrieval methods. After describing the dialogue system architecture, we perform an analysis of conversations that Athena participated in during the 2019 Alexa Prize Competition. We conclude with a report on several user studies we carried out to better understand how individual user characteristics affect system ratings.
△ Less
Submitted 20 November, 2020;
originally announced November 2020.
-
Numerical Study of Molten Metal Melt Pool Behaviour during Conduction-mode Laser Spot Melting
Authors:
Amin Ebrahimi,
Chris R. Kleijn,
Ian M. Richardson
Abstract:
Molten metal melt pools are characterised by highly non-linear responses, which are very sensitive to imposed boundary conditions. Temporal and spatial variations in the energy flux distribution are often neglected in numerical simulations of melt pool behaviour. Additionally, thermo-physical properties of materials are commonly changed to achieve agreement between predicted melt-pool shape and ex…
▽ More
Molten metal melt pools are characterised by highly non-linear responses, which are very sensitive to imposed boundary conditions. Temporal and spatial variations in the energy flux distribution are often neglected in numerical simulations of melt pool behaviour. Additionally, thermo-physical properties of materials are commonly changed to achieve agreement between predicted melt-pool shape and experimental post-solidification macrograph. Focusing on laser spot melting in conduction mode, we investigated the influence of dynamically adjusted energy flux distribution and changing thermo-physical material properties on melt pool oscillatory behaviour using both deformable and non-deformable assumptions for the gas-metal interface. Our results demonstrate that adjusting the absorbed energy flux affects the oscillatory fluid flow behaviour in the melt pool and consequently the predicted melt-pool shape and size. We also show that changing the thermophysical material properties artificially or using a non-deformable surface assumption lead to significant differences in melt pool oscillatory behaviour compared to the cases in which these assumptions are not made.
△ Less
Submitted 14 November, 2020;
originally announced November 2020.
-
Dynamical Dark Energy Properties Hidden in the Dark Matter Halos and Voids
Authors:
Aghileh S Ebrahimi,
A. Vafaei Sadr,
S. Tavasoli
Abstract:
In this paper, we analysed the halos and voids properties of a GR-based N-body simulation carried out at redshifts z= 0.0 and z= 0.8 as differences between dynamical dark energy models (namely PL and CPL) with respect to LCDM. Analysing the halos demonstrates that both models, PL and CPL, behave like LCDM, despite the velocity dispersion of halos was more sensitive to the dynamical dark energy mod…
▽ More
In this paper, we analysed the halos and voids properties of a GR-based N-body simulation carried out at redshifts z= 0.0 and z= 0.8 as differences between dynamical dark energy models (namely PL and CPL) with respect to LCDM. Analysing the halos demonstrates that both models, PL and CPL, behave like LCDM, despite the velocity dispersion of halos was more sensitive to the dynamical dark energy model. In addition, a void finder was developed to extract the properties of voids from simulated data. Further statistical model on voids confirms that the PL model produces larger voids. In summary, our novel simulation demonstrates void properties are better than halo properties in discriminating between dark energy models. Hence, the results suggest to make more use of the properties of voids in future studies of discriminating dynamical dark energy models.
△ Less
Submitted 8 November, 2020;
originally announced November 2020.
-
Toolpath design for additive manufacturing using deep reinforcement learning
Authors:
Mojtaba Mozaffar,
Ablodghani Ebrahimi,
Jian Cao
Abstract:
Toolpath optimization of metal-based additive manufacturing processes is currently hampered by the high-dimensionality of its design space. In this work, a reinforcement learning platform is proposed that dynamically learns toolpath strategies to build an arbitrary part. To this end, three prominent model-free reinforcement learning formulations are investigated to design additive manufacturing to…
▽ More
Toolpath optimization of metal-based additive manufacturing processes is currently hampered by the high-dimensionality of its design space. In this work, a reinforcement learning platform is proposed that dynamically learns toolpath strategies to build an arbitrary part. To this end, three prominent model-free reinforcement learning formulations are investigated to design additive manufacturing toolpaths and demonstrated for two cases of dense and sparse reward structures. The results indicate that this learning-based toolpath design approach achieves high scores, especially when a dense reward structure is present.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
-
The influence of surface deformation on thermocapillary flow instabilities in low Prandtl melting pools with surfactants
Authors:
Amin Ebrahimi,
Chris R. Kleijn,
Ian M. Richardson
Abstract:
Heat and fluid flow in low Prandtl number melting pools during laser processing of materials are sensitive to the prescribed boundary conditions, and the responses are highly nonlinear. Previous studies have shown that fluid flow in melt pools with surfactants can be unstable at high Marangoni numbers. In numerical simulations of molten metal flow in melt pools, surface deformations and its influe…
▽ More
Heat and fluid flow in low Prandtl number melting pools during laser processing of materials are sensitive to the prescribed boundary conditions, and the responses are highly nonlinear. Previous studies have shown that fluid flow in melt pools with surfactants can be unstable at high Marangoni numbers. In numerical simulations of molten metal flow in melt pools, surface deformations and its influence on the energy absorbed by the material are often neglected. However, this simplifying assumption may reduce the level of accuracy of numerical predictions with surface deformations. In the present study, we carry out three-dimensional numerical simulations to realise the effects of surface deformations on thermocapillary flow instabilities in laser melting of a metallic alloy with surfactants. Our computational model is based on the finite-volume method and utilises the volume-of-fluid (VOF) method for gas-metal interface tracking. Additionally, we employ a dynamically adjusted heat source model and discuss its influence on numerical predictions of the melt pool behaviour. Our results demonstrate that including free surface deformations in numerical simulations enhances the predicted flow instabilities and, thus, the predicted solid-liquid interface morphologies.
△ Less
Submitted 24 September, 2020;
originally announced September 2020.
-
Trajectory Design and Power Allocation for Drone-Assisted NR-V2X Network with Dynamic NOMA/OMA
Authors:
Omid Abbasi,
Halim Yanikomeroglu,
Afshin Ebrahimi,
Nader Mokari Yamchi
Abstract:
In this paper, we find trajectory planning and power allocation for a vehicular network in which an unmanned-aerial-vehicle (UAV) is considered as a relay to extend coverage for two disconnected far vehicles. We show that in a two-user network with an amplify-and-forward (AF) relay, non-orthogonal-multiple-access (NOMA) always has better or equal sum-rate in comparison to orthogonal-multiple-acces…
▽ More
In this paper, we find trajectory planning and power allocation for a vehicular network in which an unmanned-aerial-vehicle (UAV) is considered as a relay to extend coverage for two disconnected far vehicles. We show that in a two-user network with an amplify-and-forward (AF) relay, non-orthogonal-multiple-access (NOMA) always has better or equal sum-rate in comparison to orthogonal-multiple-access (OMA) at high signal-to-noise-ratio (SNR) regime. However, for the cases where i) base station (BS)-to-relay link is weak, or ii) two users have similar links, or iii) BS-to-relay link is similar to relay-to-weak user link, applying NOMA has negligible sum-rate gain. Hence, due to the complexity of successive-interference-cancellation (SIC) decoding in NOMA, we propose a dynamic NOMA/OMA scheme in which OMA mode is selected for transmission when applying NOMA has only negligible gain. Also, we show that OMA always has better min-rate than NOMA at high SNR regime. Further, we formulate two optimization problems which maximize the sum-rate and min-rate of the two vehicles. These problems are non-convex, and hence we propose an iterative algorithm based on alternating-optimization (AO) method which solves trajectory and power allocation sub-problems by successive-convex-approximation (SCA) and difference-of-convex (DC) methods, respectively. Finally, the above-mentioned performance is confirmed by simulations.
△ Less
Submitted 17 July, 2020;
originally announced July 2020.
-
Sensitivity of Numerical Predictions to the Permeability Coefficient in Simulations of Melting and Solidification Using the Enthalpy-Porosity Method
Authors:
Amin Ebrahimi,
Chris R. Kleijn,
Ian M. Richardson
Abstract:
The high degree of uncertainty and conflicting literature data on the value of the permeability coefficient (also known as the mushy zone constant), which aims to dampen fluid velocities in the mushy zone and suppress them in solid regions, is a critical drawback when using the fixed-grid enthalpy-porosity technique for modelling non-isothermal phase-change processes. In the present study, the sen…
▽ More
The high degree of uncertainty and conflicting literature data on the value of the permeability coefficient (also known as the mushy zone constant), which aims to dampen fluid velocities in the mushy zone and suppress them in solid regions, is a critical drawback when using the fixed-grid enthalpy-porosity technique for modelling non-isothermal phase-change processes. In the present study, the sensitivity of numerical predictions to the value of this coefficient was scrutinised. Using finite-volume based numerical simulations of isothermal and non-isothermal melting and solidification problems, the causes of increased sensitivity were identified. It was found that depending on the mushy-zone thickness and the velocity field, the solid-liquid interface morphology and the rate of phase-change are sensitive to the permeability coefficient. It is demonstrated that numerical predictions of an isothermal phase-change problem are independent of the permeability coefficient for sufficiently fine meshes. It is also shown that sensitivity to the choice of permeability coefficient can be assessed by means of an appropriately defined Péclet number.
△ Less
Submitted 25 April, 2020;
originally announced April 2020.
-
Solidification Characteristics of Laser-Powder Bed Fused AlSi10Mg: Role of Building Direction
Authors:
Hossein Azizi,
Alireza Ebrahimi,
Nana Ofori-Opoku,
Michael Greenwood,
Nikolas Provatas,
Mohsen Mohammadi
Abstract:
In this work, the effect of building direction on the microstructure evolution of laser-powder bed fusion (LPBF) processed AlSi10Mg alloy was investigated. The building direction, as shown in experimentally fabricated parts, can influence the solidification behavior and promote morphological transitions in cellular dendritic microstructures. We develop a thermal model to systemically address the i…
▽ More
In this work, the effect of building direction on the microstructure evolution of laser-powder bed fusion (LPBF) processed AlSi10Mg alloy was investigated. The building direction, as shown in experimentally fabricated parts, can influence the solidification behavior and promote morphological transitions in cellular dendritic microstructures. We develop a thermal model to systemically address the impact of laser processing conditions, and building direction on the thermal characteristics of the molten pool during laser processing of AlSi10Mg alloy. We then employ a multi-order parameter phase field model to study the microstructure evolution of LPBF-AlSi10Mg in the dilute limit, using the underlying thermal conditions for horizontal and vertical building directions as input. The phase field model employed here is designed to simulate solidification using heterogeneous nucleation from inoculant particles allowing to take into account morphological phenomena including the columnar-to-equiaxed transition (CET). The phase field model is first validated against the predictions of the previously developed steady-state CET theory of Hunt \cite{hunt1984steady}. It is then used under transient conditions to study microstructure evolution, revealing that the nucleation rate is noticeably higher in the horizontally built samples due to larger constitutional undercooling, which is consistent with experimental observations. We further quantify the effect of building direction on the local cooling conditions, and consequently on the grain morphology.
△ Less
Submitted 21 March, 2020;
originally announced March 2020.
-
High-Q Dual-Band Graphene Absorbers by Selective Excitation of Graphene Plasmon Polaritons: Circuit Model Analysis
Authors:
Saeedeh Barzegar-Parizi,
Amir Ebrahimi,
Kamran Ghorbani
Abstract:
This article presents the design of two dual-band graphene-based absorbers for terahertz frequencies. The absorbers are composed of two-dimensional (2D)arrays of ribbons and disks printed on a ground plane backed dielectric spacer. The design is based on the excitation of a specific plasmon polariton of the graphene patterned array at each resonance band. An analytical circuit model is used to der…
▽ More
This article presents the design of two dual-band graphene-based absorbers for terahertz frequencies. The absorbers are composed of two-dimensional (2D)arrays of ribbons and disks printed on a ground plane backed dielectric spacer. The design is based on the excitation of a specific plasmon polariton of the graphene patterned array at each resonance band. An analytical circuit model is used to derive closed-form relations for the geometrical parameters of the absorber and graphene parameters. The graphene patterned array appears as a surface admittance made of an infinite parallel array of series RLC branches. Each branch is equivalent to a graphene plasmon polariton (GPP) providing a distinct resonance mode. The design procedure is based on selectively exciting the first two GPPs. This means that two of the parallel RLC branches are selectively used in the circuit model analysis. The results obtained using the analytical solution are compared with the full-wave simulations in HFSS. The agreement between the results validates the developed design method.
△ Less
Submitted 7 December, 2019; v1 submitted 5 June, 2019;
originally announced June 2019.
-
Curate and Generate: A Corpus and Method for Joint Control of Semantics and Style in Neural NLG
Authors:
Shereen Oraby,
Vrindavan Harrison,
Abteen Ebrahimi,
Marilyn Walker
Abstract:
Neural natural language generation (NNLG) from structured meaning representations has become increasingly popular in recent years. While we have seen progress with generating syntactically correct utterances that preserve semantics, various shortcomings of NNLG systems are clear: new tasks require new training data which is not available or straightforward to acquire, and model outputs are simple…
▽ More
Neural natural language generation (NNLG) from structured meaning representations has become increasingly popular in recent years. While we have seen progress with generating syntactically correct utterances that preserve semantics, various shortcomings of NNLG systems are clear: new tasks require new training data which is not available or straightforward to acquire, and model outputs are simple and may be dull and repetitive. This paper addresses these two critical challenges in NNLG by: (1) scalably (and at no cost) creating training datasets of parallel meaning representations and reference texts with rich style markup by using data from freely available and naturally descriptive user reviews, and (2) systematically exploring how the style markup enables joint control of semantic and stylistic aspects of neural model output. We present YelpNLG, a corpus of 300,000 rich, parallel meaning representations and highly stylistically varied reference texts spanning different restaurant attributes, and describe a novel methodology that can be scalably reused to generate NLG datasets for other domains. The experiments show that the models control important aspects, including lexical choice of adjectives, output length, and sentiment, allowing the models to successfully hit multiple style targets without sacrificing semantics.
△ Less
Submitted 14 June, 2019; v1 submitted 4 June, 2019;
originally announced June 2019.
-
Sclera Force Control in Robot-assisted Eye Surgery: Adaptive Force Control vs. Auditory Feedback
Authors:
Ali Ebrahimi,
Changyan He,
Niravkumar Patel,
Marin Kobilarov,
Peter Gehlbach,
Iulian Iordachita
Abstract:
Surgeon hand tremor limits human capability during microsurgical procedures such as those that treat the eye. In contrast, elimination of hand tremor through the introduction of microsurgical robots diminishes the surgeon's tactile perception of useful and familiar tool-to-sclera forces. While the large mass and inertia of eye surgical robot prevents surgeon microtremor, loss of perception of smal…
▽ More
Surgeon hand tremor limits human capability during microsurgical procedures such as those that treat the eye. In contrast, elimination of hand tremor through the introduction of microsurgical robots diminishes the surgeon's tactile perception of useful and familiar tool-to-sclera forces. While the large mass and inertia of eye surgical robot prevents surgeon microtremor, loss of perception of small scleral forces may put the sclera at risk of injury. In this paper, we have applied and compared two different methods to assure the safety of sclera tissue during robot-assisted eye surgery. In the active control method, an adaptive force control strategy is implemented on the Steady-Hand Eye Robot in order to control the magnitude of scleral forces when they exceed safe boundaries. This autonomous force compensation is then compared to a passive force control method in which the surgeon performs manual adjustments in response to the provided audio feedback proportional to the magnitude of sclera force. A pilot study with three users indicate that the active control method is potentially more efficient.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
Layer Flexible Adaptive Computational Time
Authors:
Lida Zhang,
Abdolghani Ebrahimi,
Diego Klabjan
Abstract:
Deep recurrent neural networks perform well on sequence data and are the model of choice. However, it is a daunting task to decide the structure of the networks, i.e. the number of layers, especially considering different computational needs of a sequence. We propose a layer flexible recurrent neural network with adaptive computation time, and expand it to a sequence to sequence model. Different f…
▽ More
Deep recurrent neural networks perform well on sequence data and are the model of choice. However, it is a daunting task to decide the structure of the networks, i.e. the number of layers, especially considering different computational needs of a sequence. We propose a layer flexible recurrent neural network with adaptive computation time, and expand it to a sequence to sequence model. Different from the adaptive computation time model, our model has a dynamic number of transmission states which vary by step and sequence. We evaluate the model on a financial data set and Wikipedia language modeling. Experimental results show the performance improvement of 7\% to 12\% and indicate the model's ability to dynamically change the number of layers along with the computational steps.
△ Less
Submitted 4 January, 2021; v1 submitted 5 December, 2018;
originally announced December 2018.
-
Numerical study of liquid flow and heat transfer in rectangular microchannel with longitudinal vortex generators
Authors:
Amin Ebrahimi,
Ehsan Roohi,
Saeid Kheradmand
Abstract:
The liquid flow and conjugated heat transfer performance of single-phase laminar flow in rectangular microchannels equipped with longitudinal vortex generators (LVGs) are numerically investigated. Deionized-water with temperature-dependent thermo-physical properties is employed to conduct the simulations. Three-dimensional simulations are performed using an open-source flow solver based on finite…
▽ More
The liquid flow and conjugated heat transfer performance of single-phase laminar flow in rectangular microchannels equipped with longitudinal vortex generators (LVGs) are numerically investigated. Deionized-water with temperature-dependent thermo-physical properties is employed to conduct the simulations. Three-dimensional simulations are performed using an open-source flow solver based on finite volume approach and SIMPLEC algorithm. Five different configurations of the microchannel with different angles of attack of the LVGs are considered. Simulation results are compared with available experimental data and a deviation below 10% is achieved. The results show that there is a 2-25% increase in the Nusselt number for microchannels with LVGs, while the friction factor increased by 4-30%, for Reynolds number ranged from 100 to 1100. Except one at Re=100, the overall performance of the all configurations of microchannels with LVGs is higher than one.
△ Less
Submitted 7 November, 2018;
originally announced November 2018.
-
Numerical study of flow patterns and heat transfer in mini twisted oval tubes
Authors:
Amin Ebrahimi,
Ehsan Roohi
Abstract:
Flow patterns and heat transfer inside mini twisted oval tubes (TOTs) heated by constant-temperature walls are numerically investigated. Different configurations of tubes are simulated using water as the working fluid with temperature-dependent thermo-physical properties at Reynolds numbers ranging between 500 and 1100. After validating the numerical method with the published correlations and avai…
▽ More
Flow patterns and heat transfer inside mini twisted oval tubes (TOTs) heated by constant-temperature walls are numerically investigated. Different configurations of tubes are simulated using water as the working fluid with temperature-dependent thermo-physical properties at Reynolds numbers ranging between 500 and 1100. After validating the numerical method with the published correlations and available experimental results, the performance of TOTs is compared to a smooth circular tube. The overall performance of TOTs is evaluated by investigating the thermal-hydraulic performance and the results are analyzed in terms of the field synergy principle and entropy generation. Enhanced heat transfer performance for TOTs is observed at the expense of a higher pressure drop. Additionally, the secondary flow generated by the tube-wall twist is concluded to play a critical role in the augmentation of convective heat transfer, and consequently, better heat transfer performance. It is also observed that the improvement of synergy between velocity and temperature gradient and lower irreversibility cause heat transfer enhancement for TOTs.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
Hadronic Energy Resolution of a Combined High Granularity Scintillator Calorimeter System
Authors:
CALICE Collaboration,
J. Repond,
L. Xia,
J. Apostolakis,
G. Folger,
V. Ivantchenko,
A. Ribon,
V. Uzhinskiy,
D. Boumediene,
V. Francais,
G. C. Blazey,
A. Dyshkant,
K. Francis,
V. Zutshi,
O. Bach,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Gttlicher,
O. Hartbrich F. Krivan,
K. Krüger,
J. Kvasnicka,
S. Lu,
C. Neubüser,
A. Provenza
, et al. (84 additional authors not shown)
Abstract:
This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles.…
▽ More
This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles. The results of a software compensation technique based on weighting according to hit energy are compared to those of a standard linear energy reconstruction. The results are compared to predictions of the GEANT4 physics lists QGSP_BERT_HP and FTFP_BERT_HP.
△ Less
Submitted 12 September, 2018; v1 submitted 11 September, 2018;
originally announced September 2018.
-
A Roadmap for Electronic Grade 2-Dimensional Materials
Authors:
Natalie Briggs,
Shruti Subramanian,
Zhong Lin,
Xufan Li,
Xiaotian Zhang,
Kehao Zhang,
Kai Xiao,
David Geohegan,
Robert Wallace,
Long-Qing Chen,
Mauricio Terrones,
Aida Ebrahimi,
Saptarshi Das,
Joan Redwing,
Christopher Hinkle,
Kasra Momeni,
Adri van Duin,
Vin Crespi,
Swastik Kar,
Joshua A. Robinson
Abstract:
Two dimensional (2D) materials continue to hold great promise for future electronics, due to their atomic-scale thicknesses and wide range of tunable properties. However, commercial efforts in this field are relatively recent, and much progress is required to fully realize 2D materials for commercial success. Here, we present a roadmap for the realization of electronic-grade 2D materials. We discu…
▽ More
Two dimensional (2D) materials continue to hold great promise for future electronics, due to their atomic-scale thicknesses and wide range of tunable properties. However, commercial efforts in this field are relatively recent, and much progress is required to fully realize 2D materials for commercial success. Here, we present a roadmap for the realization of electronic-grade 2D materials. We discuss technology drivers, along with key aspects of synthesis and materials engineering required for development of these materials. Additionally, we highlight several fundamental milestones required for realization of electronic-grade 2D materials, and intend this article to serve as a guide for researchers in the field.
△ Less
Submitted 30 August, 2018;
originally announced August 2018.
-
Laminar convective heat transfer of shear-thinning liquids in rectangular channels with longitudinal vortex generators
Authors:
Amin Ebrahimi,
Benyamin Naranjani,
Shayan Milani,
Farzad Dadras Javan
Abstract:
Heat and fluid flow in a rectangular channel heat sink equipped with longitudinal vortex generators have been numerically investigated in the range of Reynolds numbers between 25 and 200. Aqueous solutions of carboxymethyl cellulose (CMC) with different concentrations (200-2000 ppm), which are shear-thinning non-Newtonian liquids, have been utilised as working fluid. Three-dimensional simulations…
▽ More
Heat and fluid flow in a rectangular channel heat sink equipped with longitudinal vortex generators have been numerically investigated in the range of Reynolds numbers between 25 and 200. Aqueous solutions of carboxymethyl cellulose (CMC) with different concentrations (200-2000 ppm), which are shear-thinning non-Newtonian liquids, have been utilised as working fluid. Three-dimensional simulations have been performed on a plain channel and a channel with five pairs of vortex generators. The channels have a hydraulic diameter of 8 mm and are heated by constant wall temperature. The vortex generators have been mounted at different angles of attack and locations inside the channel. The shear-thinning liquid flow in rectangular channels with longitudinal vortex generators are described and the mechanisms of heat transfer enhancement are discussed. The results demonstrate a heat transfer enhancement of 39-188% using CMC aqueous solutions in rectangular channels with LVGs with respect to a Newtonian liquid flow (i.e. water). Additionally, it is shown that equipping rectangular channels with LVGs results in an enhancement of 24-135% in heat transfer performance vis-à-vis plain channel. However, this heat transfer enhancement is associated with larger pressure losses. For the range of parameters studied in this paper, increasing the CMC concentration, the angle of attack of vortex generators and their lateral distances leads to an increase in heat transfer performance. Additionally, heat transfer performance of rectangular channels with longitudinal vortex generators enhances with increasing the Reynolds number in the laminar flow regime.
△ Less
Submitted 10 July, 2018;
originally announced July 2018.
-
An investigation on thermo-hydraulic performance of a flat-plate channel with pyramidal protrusions
Authors:
Amin Ebrahimi,
Benyamin Naranjani
Abstract:
In this study, a flat-plate channel configured with pyramidal protrusions are numerically analysed for the first time. Simulations of laminar single-phase fluid flow and heat transfer characteristics are developed using a finite-volume approach under steady-state condition. Pure water is selected as the coolant and its thermo-physical properties are modelled using a set of temperature-dependent fu…
▽ More
In this study, a flat-plate channel configured with pyramidal protrusions are numerically analysed for the first time. Simulations of laminar single-phase fluid flow and heat transfer characteristics are developed using a finite-volume approach under steady-state condition. Pure water is selected as the coolant and its thermo-physical properties are modelled using a set of temperature-dependent functions. Different configurations of the channel, including a plain channel and a channel with nature-inspired protruded surfaces, are studied here for Reynolds numbers ranging from 135 to 1430. The effects of the protrusion shape, size and arrangement on the hydrothermal performance of a flat-plate channel are studied in details. The temperature of the upper and lower surfaces of the channel is kept constant during the simulations. It is observed that utilizing these configurations can boost the heat transfer up to 277.9% and amplify the pressure loss up to 179.4% with a respect to the plain channel. It is found that the overall efficiency of the channels with pyramidal protrusions is improved by 12.0-169.4% compared to the plain channel for the conditions studied here. Furthermore, the thermodynamic performance of the channel is investigated in terms of entropy generation and it is found that equipping the channels with pyramidal protrusions leads to lower irreversibility in the system.
△ Less
Submitted 10 July, 2018;
originally announced July 2018.
-
First study of small-cell 3D Silicon Pixel Detectors for the High Luminosity LHC
Authors:
E. Currás,
J. Duarte-Campderrós,
M. Fernández,
A. García,
G. Gómez,
J. González,
R. Jaramillo,
D. Moya,
I. Vila,
S. Hidalgo,
M. Manna,
G. Pellegrini,
D. Quirion,
D. Pitzl,
A. Ebrahimi,
T. Rohe,
S. Wiederkehr
Abstract:
A study of 3D pixel sensors of cell size 50 μm x 50 μm fabricated at IMB-CNM using double-sided n-on-p 3D technology is presented. Sensors were bump-bonded to the ROC4SENS readout chip. For the first time in such a small-pitch hybrid assembly, the sensor response to ionizing radiation in a test beam of 5.6 GeV electrons was studied. Results for non-irradiated sensors are presented, including effic…
▽ More
A study of 3D pixel sensors of cell size 50 μm x 50 μm fabricated at IMB-CNM using double-sided n-on-p 3D technology is presented. Sensors were bump-bonded to the ROC4SENS readout chip. For the first time in such a small-pitch hybrid assembly, the sensor response to ionizing radiation in a test beam of 5.6 GeV electrons was studied. Results for non-irradiated sensors are presented, including efficiency, charge sharing, signal-to-noise, and resolution for different incidence angles.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
-
Continuously Tunable Dual-mode Bandstop Filter
Authors:
Amir Ebrahimi,
Thomas Baum,
James Scott,
Kamran Ghorbani
Abstract:
A varactor-based tunable bandstop filter has been proposed in this article. The proposed filter is based on a dualmode circuit developed by introducing inductive and capacitive couplings into a notch filter. The frequency tunability is achieved by using varactor diodes instead of the lumped capacitors in the circuit. Next, the equivalent circuit model has been implemented in planar microstrip tech…
▽ More
A varactor-based tunable bandstop filter has been proposed in this article. The proposed filter is based on a dualmode circuit developed by introducing inductive and capacitive couplings into a notch filter. The frequency tunability is achieved by using varactor diodes instead of the lumped capacitors in the circuit. Next, the equivalent circuit model has been implemented in planar microstrip technology using thin inductive traces and varactor diodes. The fabricated filter prototype shows a continuous center frequency tuning range of 0.66 - 0.99 GHz with a compact size of 0.12lg*0:16lg, where lg is the guided wavelength at the middle frequency of the tuning range.
△ Less
Submitted 9 May, 2018;
originally announced May 2018.
-
Estimation of Channel Parameters in a Multipath Environment via Optimizing Highly Oscillatory Error-Functions Using a Genetic Algorithm
Authors:
Amir Ebrahimi,
Ardavan Rahimian
Abstract:
Channel estimation is of crucial importance for tomorrow's wireless mobile communication systems. This paper focuses on the solution of channel parameters estimation problem in a scenario involving multiple paths in the presence of additive white Gaussian noise. We assumed that number of paths in the multipath environment is known and the transmitted signal consists of attenuated and delayed repli…
▽ More
Channel estimation is of crucial importance for tomorrow's wireless mobile communication systems. This paper focuses on the solution of channel parameters estimation problem in a scenario involving multiple paths in the presence of additive white Gaussian noise. We assumed that number of paths in the multipath environment is known and the transmitted signal consists of attenuated and delayed replicas of a known transient signal. In order to determine the maximum likelihood estimates one has to solve a complicated optimization problem. Genetic Algorithms (GA) are well known for their robustness in solving complex optimization problems. A GA is considered to extract channel parameters to minimize the derived error-function. The solution is based on the maximum-likelihood estimation of the channel parameters. Simulation results also demonstrate GA's robustness to channel parameters estimation errors.
△ Less
Submitted 2 April, 2018;
originally announced April 2018.
-
Narrowband Bandpass Frequency Selective Surface with Miniaturized Elements
Authors:
Amir Ebrahimi,
Thomas Baum,
James Scott,
Kamran Ghorbani
Abstract:
This article presents a bandpass frequency selective surface (FSS) with a narrowband frequency response. The designed FSS is made of miniaturized elements unit cell. The operation principle of the FSS is explained by using an equivalent circuit model, where the passband bandwidth can be controlled by the values of the circuit elements corresponding to the geometrical dimensions of the unit cell. T…
▽ More
This article presents a bandpass frequency selective surface (FSS) with a narrowband frequency response. The designed FSS is made of miniaturized elements unit cell. The operation principle of the FSS is explained by using an equivalent circuit model, where the passband bandwidth can be controlled by the values of the circuit elements corresponding to the geometrical dimensions of the unit cell. The compatibility of the presented structure in designing higher order narrowband filtering responses is verified by designing a second-order bandpass FSS with 8:5% fractional bandwidth with a center frequency of 2:7 GHz.
△ Less
Submitted 21 February, 2018;
originally announced February 2018.
-
Are Cold Dynamical Dark Energy Models Distinguishable in the Light of the Data?
Authors:
Aghileh S. Ebrahimi,
M. Monemzadeh,
H. Moshafi
Abstract:
In this paper we obtain observational constraints on three dynamical cold dark energy models ,include PL , CPL and FSL, with most recent cosmological data and investigate their implication for structure formation, dark energy clustering and abundance of CMB local peaks. From the joint analysis of the CMB temperature power spectrum from observation of the Planck, SNIa light-curve, baryon acoustic o…
▽ More
In this paper we obtain observational constraints on three dynamical cold dark energy models ,include PL , CPL and FSL, with most recent cosmological data and investigate their implication for structure formation, dark energy clustering and abundance of CMB local peaks. From the joint analysis of the CMB temperature power spectrum from observation of the Planck, SNIa light-curve, baryon acoustic oscillation, $fσ_8$ for large scale structure observations and the Hubble parameter, the PL model has the highest growth of matter density, $ Δ_{m} $, and matter power spectrum, $ P(k) $, compared to $Λ$CDM and other models. For the CPL on the other hand, the structure formation is considerably suppressed while the FSL has behavior similar to standard model of cosmology. Studying the clustering of dark energy, $ Δ_{DE}$, yields positive but small value with maximum of $ Δ_{DE}\simeq10^{-3} $ at early time due to matter behaviour of the PL, while for the CPL and FSL cross $ Δ_{DE}=0 $ several time which demonstrate void of dark energy with $ Δ_{DE}\simeq-10^{-11} $ in certain periods of the history of dark energy evolution. Among these three models, the PL model demonstrate that is more compatible with $ fσ_{8} $ data. We also investigated a certain geometrical measure, namely the abundance of local maxima as a function of threshold for three DDE models and find that the method is potentially capable to discriminate between the models, especially far from mean threshold. The contribution of PL and CPL for late ISW are significant compared to cosmological constant and FSL model. The tension in the Hubble parameters is almost alleviated in the PL model.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
Flow and Thermal Fields Investigation in Divergent Micro/Nano Channels
Authors:
Amin Ebrahimi,
Ehsan Roohi
Abstract:
The present work is related to the study of the nitrogen gas flow through diverging micro and nano-channels. The direct simulation Monte-Carlo (DSMC) method has been used to study the flow. The Simplified Bernoulli Trials (SBT) collision scheme has been employed to reduce the computational costs and required amounts of the computer resources. The effects of various divergence angles on flow and th…
▽ More
The present work is related to the study of the nitrogen gas flow through diverging micro and nano-channels. The direct simulation Monte-Carlo (DSMC) method has been used to study the flow. The Simplified Bernoulli Trials (SBT) collision scheme has been employed to reduce the computational costs and required amounts of the computer resources. The effects of various divergence angles on flow and thermal fields have been studied for different Knudsen numbers in late-slip and early-transition regimes. The inlet-to-outlet pressure ratio has been set to 2.5 for micro and nano-channels with a uniform constant wall temperature. By analyzing the numerical results no flow separation has been found due to slip at the wall which is different than flow behavior in continuum regime. The results indicate that the viscous component has a relatively large contribution to the overall pressure drop and flow behavior. It observed that for low divergence angles the effects of pressure forces dominate the effects of shear stress and divergence angle and cause the flow to accelerate along the channel while by increasing the divergence angle and therefore the effects of flow expansion, the flow decelerates along the channel. The mass flow rate through channel increases by increasing the divergence angle. Cold-to-hot heat transfer has been observed in diverging micro and nano-channels. In order to investigate the thermal behavior in diverging micro and nano-channels, the results have been compared to weakly non-linear constitutive laws derived from Boltzmann's equation.
△ Less
Submitted 25 January, 2018;
originally announced January 2018.
-
Ideological Sublations: Resolution of Dialectic in Population-based Optimization
Authors:
S. Hossein Hosseini,
Afshin Ebrahimi
Abstract:
A population-based optimization algorithm was designed, inspired by two main thinking modes in philosophy, both based on dialectic concept and thesis-antithesis paradigm. They impose two different kinds of dialectics. Idealistic and materialistic antitheses are formulated as optimization models. Based on the models, the population is coordinated for dialectical interactions. At the population-base…
▽ More
A population-based optimization algorithm was designed, inspired by two main thinking modes in philosophy, both based on dialectic concept and thesis-antithesis paradigm. They impose two different kinds of dialectics. Idealistic and materialistic antitheses are formulated as optimization models. Based on the models, the population is coordinated for dialectical interactions. At the population-based context, the formulated optimization models are reduced to a simple detection problem for each thinker (particle). According to the assigned thinking mode to each thinker and her/his measurements of corresponding dialectic with other candidate particles, they deterministically decide to interact with a thinker in maximum dialectic with their theses. The position of a thinker at maximum dialectic is known as an available antithesis among the existing solutions. The dialectical interactions at each ideological community are distinguished by meaningful distributions of step-sizes for each thinking mode. In fact, the thinking modes are regarded as exploration and exploitation elements of the proposed algorithm. The result is a delicate balance without any requirement for adjustment of step-size coefficients. Main parameter of the proposed algorithm is the number of particles appointed to each thinking modes, or equivalently for each kind of motions. An additional integer parameter is defined to boost the stability of the final algorithm in some particular problems. The proposed algorithm is evaluated by a testbed of 12 single-objective continuous benchmark functions. Moreover, its performance and speed were highlighted in sparse reconstruction and antenna selection problems, at the context of compressed sensing and massive MIMO, respectively. The results indicate fast and efficient performance in comparison with well-known evolutionary algorithms and dedicated state-of-the-art algorithms.
△ Less
Submitted 3 September, 2017; v1 submitted 21 July, 2017;
originally announced July 2017.