Showing 1–50 of 93 results for author: Fukuda, M

Status of Xtend telescope onboard X-Ray Imaging and Spectroscopy Mission (XRISM)

Authors: Koji Mori, Hiroshi Tomida, Hiroshi Nakajima, Takashi Okajima, Hirofumi Noda, Hiroyuki Uchida, Hiromasa Suzuki, Shogo Benjamin Kobayashi, Tomokage Yoneyama, Kouichi Hagino, Kumiko Nobukawa, Takaaki Tanaka, Hiroshi Murakami, Hideki Uchiyama, Masayoshi Nobukawa, Hironori Matsumoto, Takeshi Tsuru, Makoto Yamauchi, Isamu Hatsukade, Hirokazu Odaka, Takayoshi Kohmura, Kazutaka Yamaoka, Manabu Ishida, Yoshitomo Maeda, Takayuki Hayashi , et al. (38 additional authors not shown)

Abstract: Xtend is one of the two telescopes onboard the X-ray imaging and spectroscopy mission (XRISM), which was launched on September 7th, 2023. Xtend comprises the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. A large field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is… ▽ More Xtend is one of the two telescopes onboard the X-ray imaging and spectroscopy mission (XRISM), which was launched on September 7th, 2023. Xtend comprises the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. A large field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is realized by the combination of the SXI and XMA with a focal length of 5.6 m. The SXI employs four P-channel, back-illuminated type CCDs with a thick depletion layer of 200 $μ$m. The four CCD chips are arranged in a 2$\times$2 grid and cooled down to $-110$ $^{\circ}$C with a single-stage Stirling cooler. Before the launch of XRISM, we conducted a month-long spacecraft thermal vacuum test. The performance verification of the SXI was successfully carried out in a course of multiple thermal cycles of the spacecraft. About a month after the launch of XRISM, the SXI was carefully activated and the soundness of its functionality was checked by a step-by-step process. Commissioning observations followed the initial operation. We here present pre- and post-launch results verifying the Xtend performance. All the in-orbit performances are consistent with those measured on ground and satisfy the mission requirement. Extensive calibration studies are ongoing. △ Less

Submitted 28 June, 2024; originally announced June 2024.

Comments: 10 pages, 8 figures. Proceedings of SPIE Astronomical Telescopes and Instrumentation 2024

Initial operations of the Soft X-ray Imager onboard XRISM

Authors: Hiromasa Suzuki, Tomokage Yoneyama, Shogo B. Kobayashi, Hirofumi Noda, Hiroyuki Uchida, Kumiko K. Nobukawa, Kouichi Hagino, Koji Mori, Hiroshi Tomida, Hiroshi Nakajima, Takaaki Tanaka, Hiroshi Murakami, Hideki Uchiyama, Masayoshi Nobukawa, Yoshiaki Kanemaru, Yoshinori Otsuka, Haruhiko Yokosu, Wakana Yonemaru, Hanako Nakano, Kazuhiro Ichikawa, Reo Takemoto, Tsukasa Matsushima, Marina Yoshimoto, Mio Aoyagi, Kohei Shima , et al. (30 additional authors not shown)

Abstract: XRISM (X-Ray Imaging and Spectroscopy Mission) is an astronomical satellite with the capability of high-resolution spectroscopy with the X-ray microcalorimeter, Resolve, and wide field-of-view imaging with the CCD camera, Xtend. The Xtend consists of the mirror assembly (XMA: X-ray Mirror Assembly) and detector (SXI: Soft X-ray Imager). The components of SXI include CCDs, analog and digital electr… ▽ More XRISM (X-Ray Imaging and Spectroscopy Mission) is an astronomical satellite with the capability of high-resolution spectroscopy with the X-ray microcalorimeter, Resolve, and wide field-of-view imaging with the CCD camera, Xtend. The Xtend consists of the mirror assembly (XMA: X-ray Mirror Assembly) and detector (SXI: Soft X-ray Imager). The components of SXI include CCDs, analog and digital electronics, and a mechanical cooler. After the successful launch on September 6th, 2023 (UT) and subsequent critical operations, the mission instruments were turned on and set up. The CCDs have been kept at the designed operating temperature of $-110^\circ$C ~after the electronics and cooling system were successfully set up. During the initial operation phase, which continued for more than a month after the critical operations, we verified the observation procedure, stability of the cooling system, all the observation options with different imaging areas and/or timing resolutions, and operations for protection against South Atlantic Anomaly. We optimized the operation procedure and observation parameters including the cooler settings, imaging areas for the specific modes with higher timing resolutions, and event selection algorithm. We summarize our policy and procedure of the initial operations for SXI. We also report on a couple of issues we faced during the initial operations and lessons learned from them. △ Less

Submitted 28 June, 2024; originally announced June 2024.

Comments: 10 pages, 8 figures, Proceedings of SPIE Astronomical Telescopes + Instrumentation 2024

Optical Cooling of Dot-in-crystal Halide Perovskites: Challenges of Nonlinear Exciton Recombination

Authors: Yasuhiro Yamada, Takeru Oki, Takeshi Morita, Takumi Yamada, Mitsuki Fukuda, Shuhei Ichikawa, Kazunobu Kojima, Yoshihiko Kanemitsu

Abstract: Highly efficient anti-Stokes (AS) photoluminescence (PL) is observed from halide perovskite quantum dots (QDs) due to their strong electron-phonon interactions. The AS PL is particularly intriguing as it suggests the potential for semiconductor optical cooling if the external quantum efficiency approaches 100%. However, the PL quantum efficiency in QDs is primarily dominated by multiparticle nonra… ▽ More Highly efficient anti-Stokes (AS) photoluminescence (PL) is observed from halide perovskite quantum dots (QDs) due to their strong electron-phonon interactions. The AS PL is particularly intriguing as it suggests the potential for semiconductor optical cooling if the external quantum efficiency approaches 100%. However, the PL quantum efficiency in QDs is primarily dominated by multiparticle nonradiative Auger recombination processes under intense photoexcitation, which impose limits on the optical cooling gain. Here, we investigate the Auger recombination of dot-in-crystal perovskites. We quantitatively estimate the maximum optical cooling gain and the corresponding excitation intensity. We further conducted optical cooling experiments and demonstrate a maximum photo-cooling of approximately 9 K from room temperature. Additionally, we confirmed that increasing the excitation intensity leads to a transition from photo-cooling to photo-heating. These observations are consistent with our time-resolved measurements, offering insights into the potential and limitations of optical cooling in semiconductor QDs. △ Less

Submitted 15 June, 2024; originally announced June 2024.

Exploiting cone approximations in an augmented Lagrangian method for conic optimization

Authors: Mituhiro Fukuda, Walter Gómez, Gabriel Haeser, Leonardo M. Makoto

Abstract: We propose an algorithm for general nonlinear conic programming which does not require the knowledge of the full cone, but rather a simpler, more tractable, approximation of it. We prove that the algorithm satisfies a strong global convergence property in the sense that it generates a strong sequential optimality condition. In particular, a KKT point is necessarily found when a limit point satisfi… ▽ More We propose an algorithm for general nonlinear conic programming which does not require the knowledge of the full cone, but rather a simpler, more tractable, approximation of it. We prove that the algorithm satisfies a strong global convergence property in the sense that it generates a strong sequential optimality condition. In particular, a KKT point is necessarily found when a limit point satisfies Robinson's condition. We conduct numerical experiments minimizing nonlinear functions subject to a copositive cone constraint. In order to do this, we consider a well known polyhedral approximation of this cone by means of refining the polyhedral constraints after each augmented Lagrangian iteration. We show that our strategy outperforms the standard approach of considering a close polyhedral approximation of the full copositive cone in every iteration. △ Less

Submitted 2 June, 2024; originally announced June 2024.

Comments: 13 pages, 5 figures

MSC Class: 90C30; 49M37; 90C26

Preliminary Investigation of SSL for Complex Work Activity Recognition in Industrial Domain via MoIL

Authors: Qingxin Xia, Takuya Maekawa, Jaime Morales, Takahiro Hara, Hirotomo Oshima, Masamitsu Fukuda, Yasuo Namioka

Abstract: In this study, we investigate a new self-supervised learning (SSL) approach for complex work activity recognition using wearable sensors. Owing to the cost of labeled sensor data collection, SSL methods for human activity recognition (HAR) that effectively use unlabeled data for pretraining have attracted attention. However, applying prior SSL to complex work activities such as packaging works is… ▽ More In this study, we investigate a new self-supervised learning (SSL) approach for complex work activity recognition using wearable sensors. Owing to the cost of labeled sensor data collection, SSL methods for human activity recognition (HAR) that effectively use unlabeled data for pretraining have attracted attention. However, applying prior SSL to complex work activities such as packaging works is challenging because the observed data vary considerably depending on situations such as the number of items to pack and the size of the items in the case of packaging works. In this study, we focus on sensor data corresponding to characteristic and necessary actions (sensor data motifs) in a specific activity such as a stretching packing tape action in an assembling a box activity, and \textcolor{black}{try} to train a neural network in self-supervised learning so that it identifies occurrences of the characteristic actions, i.e., Motif Identification Learning (MoIL). The feature extractor in the network is used in the downstream task, i.e., work activity recognition, enabling precise activity recognition containing characteristic actions with limited labeled training data. The MoIL approach was evaluated on real-world work activity data and it achieved state-of-the-art performance under limited training labels. △ Less

Submitted 21 April, 2024; originally announced April 2024.

Comments: This paper is accepted by PerCom WiP 2024

Atomic observation on diamond (001) surfaces with non-contact atomic force microscopy

Authors: Runnan Zhang, Yuuki Yasui, Masahiro Fukuda, Taisuke Ozaki, Masahiko Ogura, Toshiharu Makino, Daisuke Takeuchi, Yoshiaki Sugimoto

Abstract: To achieve atomic-level characterization of the diamond (001) surface, persistent efforts have been made over the past few decades. The motivation behind the pursuit extends beyond investigating surface defects and adsorbates; it also involves unraveling the mystery of the smooth growth of diamond. However, the inherently low conductivity and the short C-C bonds render atomic resolution imaging ex… ▽ More To achieve atomic-level characterization of the diamond (001) surface, persistent efforts have been made over the past few decades. The motivation behind the pursuit extends beyond investigating surface defects and adsorbates; it also involves unraveling the mystery of the smooth growth of diamond. However, the inherently low conductivity and the short C-C bonds render atomic resolution imaging exceptionally challenging. Here, we successfully overcame these challenges by employing non-contact atomic force microscopy with reactive Si tips. Atomic resolution imaging was achieved even at room temperature. With density-functional-theory calculations, we clarified that the critical factors for atomic resolution are in the formation of tilted C-Si bonds between scanning probes and surfaces, along with reordering of the surface C-C dimers. Implications of the findings extend beyond the realm of surface characterization. The present atomic-resolution microscopies drive future advancements in diamond technologies by providing avenues for identifying dopants and constructing artificial nanostructures. △ Less

Submitted 26 March, 2024; originally announced March 2024.

Symbolically integrating tensor networks over various random tensors by the second version of Python RTNI

Authors: Motohisa Fukuda

Abstract: We are upgrading the Python-version of RTNI, which symbolically integrates tensor networks over the Haar-distributed unitary matrices. Now, PyRTNI2 can treat the Haar-distributed orthogonal matrices and the real and complex normal Gaussian tensors as well. Moreover, it can export tensor networks in the format of TensorNetwork so that one can make further calculations with concrete tensors, even fo… ▽ More We are upgrading the Python-version of RTNI, which symbolically integrates tensor networks over the Haar-distributed unitary matrices. Now, PyRTNI2 can treat the Haar-distributed orthogonal matrices and the real and complex normal Gaussian tensors as well. Moreover, it can export tensor networks in the format of TensorNetwork so that one can make further calculations with concrete tensors, even for low dimensions, where the Weingarten functions differ from the ones for high dimensions. The tutorial notebooks are found at GitHub: https://github.com/MotohisaFukuda/PyRTNI2. In this paper, we explain maths behind the program and show what kind of tensor network calculations can be made with it. For the former, we interpret the element-wise moment calculus of the above random matrices and tensors in terms of tensor network diagrams, and argue that the view is natural, relating delta functions in the calculus to edges in tensor network diagrams. △ Less

Submitted 15 September, 2023; v1 submitted 3 September, 2023; originally announced September 2023.

Comments: The title was slitely changed, typos were fixed. PyRTNI2 is available at https://github.com/MotohisaFukuda/PyRTNI2

Electronic band structure change with structural transition of buckled Au$_2$X monolayers induced by strain

Authors: Masahiro Fukuda, Taisuke Ozaki

Abstract: This study investigates the strain-induced structural transitions of $η\leftrightarrow θ$ and the changes in electronic band structures of Au$_2$X (X=S, Se, Te, Si, Ge) and Au$_4$SSe. We focus on Au$_2$S monolayers, which can form multiple meta-stable monolayers theoretically, including $η$-Au$_2$S, a buckled penta-monolayer composed of a square Au lattice and S adatoms. The $θ$-Au$_2$S is regarde… ▽ More This study investigates the strain-induced structural transitions of $η\leftrightarrow θ$ and the changes in electronic band structures of Au$_2$X (X=S, Se, Te, Si, Ge) and Au$_4$SSe. We focus on Au$_2$S monolayers, which can form multiple meta-stable monolayers theoretically, including $η$-Au$_2$S, a buckled penta-monolayer composed of a square Au lattice and S adatoms. The $θ$-Au$_2$S is regarded as a distorted structure of $η$-Au$_2$S. Based on density functional theory (DFT) calculations using a generalized gradient approximation, the conduction and the valence bands of $θ$-Au$_2$S intersect at the $Γ$ point, leading to linear dispersion, whereas $η$-Au$_2$S has a band gap of 1.02 eV. The conduction band minimum depends on the specific Au-Au bond distance, while the valence band maximum depends on both Au-S and Au-Au interactions. The band gap undergoes significant changes during the $η\leftrightarrow θ$ phase transition of Au$_2$S induced by applying tensile or compressive in-plane biaxial strain to the lattice. Moreover, substituting S atoms with other elements alters the electronic band structures, resulting in a variety of physical properties without disrupting the fundamental Au lattice network. Therefore, the family of Au$_2$X monolayers holds potential as materials for atomic scale network devices. △ Less

Submitted 22 June, 2023; v1 submitted 14 May, 2023; originally announced May 2023.

Comments: 9 pages, 10 figures, 2 tables. 9 pages, 11 figures, 1 table for Supplemental Information

PALF: Pre-Annotation and Camera-LiDAR Late Fusion for the Easy Annotation of Point Clouds

Authors: Yucheng Zhang, Masaki Fukuda, Yasunori Ishii, Kyoko Ohshima, Takayoshi Yamashita

Abstract: 3D object detection has become indispensable in the field of autonomous driving. To date, gratifying breakthroughs have been recorded in 3D object detection research, attributed to deep learning. However, deep learning algorithms are data-driven and require large amounts of annotated point cloud data for training and evaluation. Unlike 2D image labels, annotating point cloud data is difficult due… ▽ More 3D object detection has become indispensable in the field of autonomous driving. To date, gratifying breakthroughs have been recorded in 3D object detection research, attributed to deep learning. However, deep learning algorithms are data-driven and require large amounts of annotated point cloud data for training and evaluation. Unlike 2D image labels, annotating point cloud data is difficult due to the limitations of sparsity, irregularity, and low resolution, which requires more manual work, and the annotation efficiency is much lower than 2D image.Therefore, we propose an annotation algorithm for point cloud data, which is pre-annotation and camera-LiDAR late fusion algorithm to easily and accurately annotate. The contributions of this study are as follows. We propose (1) a pre-annotation algorithm that employs 3D object detection and auto fitting for the easy annotation of point clouds, (2) a camera-LiDAR late fusion algorithm using 2D and 3D results for easily error checking, which helps annotators easily identify missing objects, and (3) a point cloud annotation evaluation pipeline to evaluate our experiments. The experimental results show that the proposed algorithm improves the annotating speed by 6.5 times and the annotation quality in terms of the 3D Intersection over Union and precision by 8.2 points and 5.6 points, respectively; additionally, the miss rate is reduced by 31.9 points. △ Less

Submitted 12 April, 2023; originally announced April 2023.

Distinguishing 2-knots admitting circle actions by fundamental groups

Authors: Mizuki Fukuda, Masaharu Ishikawa

Abstract: A 2-sphere embedded in the 4-sphere invariant under a circle action is called a branched twist spin. A branched twist spin is constructed from a 1-knot in the 3-sphere and a pair of coprime integers uniquely. In this paper, we study, for each pair of coprime integers, if two different 1-knots yield the same branched twist spin, and prove that such a pair of 1-knots does not exist in most cases. Fu… ▽ More A 2-sphere embedded in the 4-sphere invariant under a circle action is called a branched twist spin. A branched twist spin is constructed from a 1-knot in the 3-sphere and a pair of coprime integers uniquely. In this paper, we study, for each pair of coprime integers, if two different 1-knots yield the same branched twist spin, and prove that such a pair of 1-knots does not exist in most cases. Fundamental groups of 3-orbifolds of cyclic type are obtained as quotient groups of the fundamental groups of the complements of branched twist spins. We use these groups for distinguishing branched twist spins. △ Less

Submitted 27 July, 2024; v1 submitted 13 April, 2023; originally announced April 2023.

Comments: 9 pages

MSC Class: 57Q45 (Primary) 57M05; 57M10; 57M27 (Secondary)

Representations of branched twist spins with a non-trivial center of order 2

Authors: Mizuki Fukuda

Abstract: It is known that a presentation of the knot group of a branched twist spin is obtained from a Wirtinger presentation of the original 1-knot group by adding a generator corresponding to a regular orbit of the circle action and a certain relator. In particular, the additional generator is an element of the center of the knot group. In this paper, we focus on ${\rm SL}_2(\mathbb{Z}_3)$-representation… ▽ More It is known that a presentation of the knot group of a branched twist spin is obtained from a Wirtinger presentation of the original 1-knot group by adding a generator corresponding to a regular orbit of the circle action and a certain relator. In particular, the additional generator is an element of the center of the knot group. In this paper, we focus on ${\rm SL}_2(\mathbb{Z}_3)$-representations and dihedral group representations. For the former case, we give a sufficient condition for the existence of an ${\rm SL}_2(\mathbb{Z}_3)$-representation for a branched twist spin. For the latter case, we determine the number of even-ordered dihedral group representations of branched twist spins. △ Less

Submitted 23 September, 2022; originally announced September 2022.

Comments: 10pages

MSC Class: 57Q45 (Primary) 57M60; 57M27(Secondary)

Construction of weaving and polycatenane motifs from periodic tilings of the plane

Authors: Mizuki Fukuda, Motoko Kotani, Sonia Mahmoudi

Abstract: Doubly periodic weaves and polycatenanes embedded in the thickened Euclidean plane are three-dimensional complex entangled structures whose topological properties can be encoded in any generating cell of its infinite planar representation. Such a periodic cell, called motif, is a specific type of link diagram embedded on a torus consisting of essential simple closed curves for weaves, or null-homo… ▽ More Doubly periodic weaves and polycatenanes embedded in the thickened Euclidean plane are three-dimensional complex entangled structures whose topological properties can be encoded in any generating cell of its infinite planar representation. Such a periodic cell, called motif, is a specific type of link diagram embedded on a torus consisting of essential simple closed curves for weaves, or null-homotopic for polycatenanes. In this paper, we introduce a methodology to construct such motifs using the concept of polygonal link transformations. This approach generalizes to the Euclidean plane existing methods to construct polyhedral links in the three-dimensional space. Then, we will state our main result which allows one to predict the type of motif that can be built from a given planar periodic tiling and a chosen polygonal link method. △ Less

Submitted 4 April, 2023; v1 submitted 24 June, 2022; originally announced June 2022.

Comments: 21 pages, 11 figures

MSC Class: 57K10; 57K12; 57M15; 05A05

Prediction of quaternary hydrides based on densest ternary sphere packings

Authors: Ryotaro Koshoji, Masahiro Fukuda, Taisuke Ozaki

Abstract: We exhaustively search quaternary metal hydrides based on the (13-2-1) and (13-3-1) structures that are the two of the putative densest ternary sphere packings in cubic systems [R. Koshoji \textit{et al.}, Phys. Rev. E \textbf{104}, 024101 (2021)]. The 73304 candidate hydrides are generated by substituting the small spheres with hydrogen atoms, the medium, large, and fourth spheres with metallic a… ▽ More We exhaustively search quaternary metal hydrides based on the (13-2-1) and (13-3-1) structures that are the two of the putative densest ternary sphere packings in cubic systems [R. Koshoji \textit{et al.}, Phys. Rev. E \textbf{104}, 024101 (2021)]. The 73304 candidate hydrides are generated by substituting the small spheres with hydrogen atoms, the medium, large, and fourth spheres with metallic atoms. Especially, the substitution of the small spheres with hydrogen atoms gives the unconventional hydrogen sublattices. We screen unstable hydrides in the candidates through geometrical optimizations, constant pressure molecular dynamics simulations, and phonon calculations under hydrostatic pressure of $10$ GPa, and identify 23 hydrides with static and dynamic stability, including $\mathrm{H}_{12} \mathrm{Sc} \mathrm{Y}_{2} \mathrm{La}$ and $\mathrm{H}_{12} \mathrm{Ti} \mathrm{Ni}_{3} \mathrm{Ba}$. We expect that the 23 candidates of hydrides screened by the exhaustive search for 73304 hydrides provide a guideline to narrow down the search space for trials in the experimental synthesis of quaternary metal hydrides. △ Less

Submitted 10 June, 2022; originally announced June 2022.

Comments: 8 figures

Exact SDP relaxations for quadratic programs with bipartite graph structures

Authors: Godai Azuma, Mituhiro Fukuda, Sunyoung Kim, Makoto Yamashita

Abstract: For nonconvex quadratically constrained quadratic programs (QCQPs), we first show that, under certain feasibility conditions, the standard semidefinite (SDP) relaxation is exact for QCQPs with bipartite graph structures. The exact optimal solutions are obtained by examining the dual SDP relaxation and the rank of the optimal solution of this dual SDP relaxation under strong duality. Our results on… ▽ More For nonconvex quadratically constrained quadratic programs (QCQPs), we first show that, under certain feasibility conditions, the standard semidefinite (SDP) relaxation is exact for QCQPs with bipartite graph structures. The exact optimal solutions are obtained by examining the dual SDP relaxation and the rank of the optimal solution of this dual SDP relaxation under strong duality. Our results on the QCQPs generalize the results on QCQP with sign-definite bipartite graph structures, QCQPs with forest structures, and QCQPs with nonpositive off-diagonal data elements. Second, we propose a conversion method from QCQPs with no particular structure to the ones with bipartite graph structures. As a result, we demonstrate that a wider class of QCQPs can be exactly solved by the SDP relaxation. Numerical instances are presented for illustration. △ Less

Submitted 1 May, 2022; v1 submitted 20 April, 2022; originally announced April 2022.

Comments: 23 pages, 6 figures

MSC Class: 90C20; 90C22; 90C25; 90C26

Classification of doubly periodic untwisted (p,q)-weaves by their crossing number

Authors: Mizuki Fukuda, Motoko Kotani, Sonia Mahmoudi

Abstract: A weave is the lift to the Euclidean thickened plane of a set of infinitely many planar crossed geodesics, that can be characterized by a number of sets of threads describing the organization of the non-intersecting curves, together with a set of crossing sequences representing the entanglements. In this paper, the classification of a specific class of doubly periodic weaves, called untwisted (p,q… ▽ More A weave is the lift to the Euclidean thickened plane of a set of infinitely many planar crossed geodesics, that can be characterized by a number of sets of threads describing the organization of the non-intersecting curves, together with a set of crossing sequences representing the entanglements. In this paper, the classification of a specific class of doubly periodic weaves, called untwisted (p,q)-weaves, is done by their crossing number, which is the minimum number of crossings that can possibly be found in a unit cell of its infinite weaving diagrams. Such a diagram can be considered as a particular type of quadrivalent periodic planar graph with an over or under information at each vertex, whose unit cell corresponds to a link diagram in a thickened torus. Moreover, considering that a weave is not uniquely defined by its sets of threads and its crossing sequences, we also specify the notion of equivalence classes by introducing a new parameter, called crossing matrix. △ Less

Submitted 3 February, 2022; originally announced February 2022.

Comments: 22 pages, 12 figures. arXiv admin note: text overlap with arXiv:2108.09464

MSC Class: 57K10; 57K12; 57M15; 05A05

Charge-changing cross sections for $^{42\textrm{--}51}$Ca and effect of charged-particle evaporation induced by neutron removal reaction

Authors: M. Tanaka, M. Takechi, A. Homma, A. Prochazka, M. Fukuda, D. Nishimura, T. Suzuki, T. Moriguchi, D. S. Ahn, A. Aimaganbetov, M. Amano, H. Arakawa, S. Bagchi, K. -H. Behr, N. Burtebayev, K. Chikaato, H. Du, T. Fujii, N. Fukuda, H. Geissel, T. Hori, S. Hoshino, R. Igosawa, A. Ikeda, N. Inabe , et al. (43 additional authors not shown)

Abstract: Charge-changing cross sections $σ_\mathrm{CC}$ for $^{42\textrm{--}51}$Ca on a carbon target at around 280~MeV/nucleon have been measured. The measured $σ_\mathrm{CC}$ values differ significantly from the previously developed calculations based on the Glauber model. However, through introduction of the charged-particle evaporation effect induced by the neutron-removal reaction in addition to the G… ▽ More Charge-changing cross sections $σ_\mathrm{CC}$ for $^{42\textrm{--}51}$Ca on a carbon target at around 280~MeV/nucleon have been measured. The measured $σ_\mathrm{CC}$ values differ significantly from the previously developed calculations based on the Glauber model. However, through introduction of the charged-particle evaporation effect induced by the neutron-removal reaction in addition to the Glauber-model calculation, experimental $σ_\mathrm{CC}$ values on $^{12}$C at around 300~MeV/nucleon for nuclides from C to Fe isotopes are all reproduced with approximately 1\% accuracy. This proposed model systematically reproduces $σ_\mathrm{CC}$ data without phenomenological corrections, and can also explain experimental $σ_\mathrm{CC}$ values obtained in other energy regions. △ Less

Submitted 26 November, 2021; originally announced November 2021.

Comments: 13 pages, 11 figures

Construction and Classification of Combinatorial Weaving Diagrams

Authors: Mizuki Fukuda, Motoko Kotani, Sonia Mahmoudi

Abstract: This paper introduces a new systematic algorithm for constructing periodic Euclidean weaving diagrams with combinatorial arguments. It is shown that such a weaving diagram can be considered as a specific type of four-regular periodic planar tiling with over or under information at each vertex. Therefore, a weaving diagram can be constructed using two sets of cycles, one to build a tiling, and a se… ▽ More This paper introduces a new systematic algorithm for constructing periodic Euclidean weaving diagrams with combinatorial arguments. It is shown that such a weaving diagram can be considered as a specific type of four-regular periodic planar tiling with over or under information at each vertex. Therefore, a weaving diagram can be constructed using two sets of cycles, one to build a tiling, and a second to define the crossing information. However, this construction method does not guarantee the uniqueness of the diagram, so we define the notion of equivalence classes of weaving diagrams using the concept of crossing-matrices. Finally, we present a classification of our periodic structures according to the minimum number of crossings on a unit cell. △ Less

Submitted 23 June, 2022; v1 submitted 21 August, 2021; originally announced August 2021.

Comments: Content reviewed into another paper

MSC Class: 57K10; 57K12; 57M15; 05A05

Construction and Commissioning of Mid-Infrared SASE FEL at cERL

Authors: Yosuke Honda, Masahiro Adachi, Shu Eguchi, Masafumi Fukuda, Ryoichi Hajima, Nao Higashi, Masayuki Kakehata, Ryukou Kato, Takako Miura, Tsukasa Miyajima, Shinya Nagahashi, Norio Nakamura, Kazuyuki Nigorikawa, Takashi Nogami, Takashi Obina, Hidenori Sagehashi, Hiroshi Sakai, Tadatake Sato, Miho Shimada, Tatsuro Shioya, Ryota Takai, Olga Tanaka, Yasunori Tanimoto, Kimichika Tsuchiya, Takashi Uchiyama , et al. (4 additional authors not shown)

Abstract: The mid-infrared range is an important spectrum range where materials exhibit a characteristic response corresponding to their molecular structure. A free-electron laser (FEL) is a promising candidate for a high-power light source with wavelength tunability to investigate the nonlinear response of materials. Although the self-amplification spontaneous emission (SASE) scheme is not usually adopted… ▽ More The mid-infrared range is an important spectrum range where materials exhibit a characteristic response corresponding to their molecular structure. A free-electron laser (FEL) is a promising candidate for a high-power light source with wavelength tunability to investigate the nonlinear response of materials. Although the self-amplification spontaneous emission (SASE) scheme is not usually adopted in the mid-infrared wavelength range, it may have advantages such as layout simplicity, the possibility of producing a single pulse, and scalability to a short-wavelength facility. To demonstrate the operation of a mid-infrared SASE FEL system in an energy recovery linac (ERL) layout, we constructed an SASE FEL setup in cERL, a test facility of the superconducting linac with the ERL configuration. Despite the adverse circumstance of space charge effects due to the given boundary condition of the facility, we successfully established the beam condition at the undulators, and observed FEL emission at a wavelength of 20 $μ$m. The results show that the layout of cERL has the potential for serving as a mid-infrared light source. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: 18 pages, 35 figures

New Bregman proximal type algorithms for solving DC optimization problems

Authors: Shota Takahashi, Mituhiro Fukuda, Mirai Tanaka

Abstract: Difference of Convex (DC) optimization problems have objective functions that are differences between two convex functions. Representative ways of solving these problems are the proximal DC algorithms, which require that the convex part of the objective function have $L$-smoothness. In this article, we propose the Bregman Proximal DC Algorithm (BPDCA) for solving large-scale DC optimization proble… ▽ More Difference of Convex (DC) optimization problems have objective functions that are differences between two convex functions. Representative ways of solving these problems are the proximal DC algorithms, which require that the convex part of the objective function have $L$-smoothness. In this article, we propose the Bregman Proximal DC Algorithm (BPDCA) for solving large-scale DC optimization problems that do not possess $L$-smoothness. Instead, it requires that the convex part of the objective function has the $L$-smooth adaptable property that is exploited in Bregman proximal gradient algorithms. In addition, we propose an accelerated version, the Bregman Proximal DC Algorithm with extrapolation (BPDCAe), with a new restart scheme. We show the global convergence of the iterates generated by BPDCA(e) to a limiting critical point under the assumption of the Kurdyka-Łojasiewicz property or subanalyticity of the objective function and other weaker conditions than those of the existing methods. We applied our algorithms to phase retrieval, which can be described both as a nonconvex optimization problem and as a DC optimization problem. Numerical experiments showed that BPDCAe outperformed existing Bregman proximal-type algorithms because the DC formulation allows for larger admissible step sizes. △ Less

Submitted 9 May, 2022; v1 submitted 11 May, 2021; originally announced May 2021.

MSC Class: 90C26; 90C30; 65K05

Generating series and matrix models for meandric systems with one shallow side

Authors: Motohisa Fukuda, Ion Nechita

Abstract: In this article, we investigate meandric systems having one shallow side: the arch configuration on that side has depth at most two. This class of meandric systems was introduced and extensively examined by I. P. Goulden, A. Nica, and D. Puder in 2020. Shallow arch configurations are in bijection with the set of interval partitions. We study meandric systems by using moment-cumulant transforms for… ▽ More In this article, we investigate meandric systems having one shallow side: the arch configuration on that side has depth at most two. This class of meandric systems was introduced and extensively examined by I. P. Goulden, A. Nica, and D. Puder in 2020. Shallow arch configurations are in bijection with the set of interval partitions. We study meandric systems by using moment-cumulant transforms for non-crossing and interval partitions, corresponding to the notions of free and boolean independence, respectively, in non-commutative probability. We obtain formulas for the generating series of different classes of meandric systems with one shallow side, by explicitly enumerating the simpler, irreducible objects. In addition, we propose random matrix models for the corresponding meandric polynomials, which can be described in the language of quantum information theory, in particular that of quantum channels. △ Less

Submitted 5 March, 2021; originally announced March 2021.

Comments: 22 pages

Additivity violation of quantum channels via strong convergence to semi-circular and circular elements

Authors: Motohisa Fukuda, Takahiro Hasebe, Shinya Sato

Abstract: Additivity violation of minimum output entropy, which shows non-classical properties in quantum communication, had been proved in most cases for random quantum channels defined by Haar-distributed unitary matrices. In this paper, we investigate random completely positive maps made of Gaussian Unitary Ensembles and Ginibre Ensembles regarding this matter. Using semi-circular systems and circular sy… ▽ More Additivity violation of minimum output entropy, which shows non-classical properties in quantum communication, had been proved in most cases for random quantum channels defined by Haar-distributed unitary matrices. In this paper, we investigate random completely positive maps made of Gaussian Unitary Ensembles and Ginibre Ensembles regarding this matter. Using semi-circular systems and circular systems of free probability, we not only show the multiplicativity violation of maximum output norms in the asymptotic regimes but also prove the additivity violation via Haagerup inequality for a new class of random quantum channels constructed by rectifying the above completely positive maps based on strong convergence. △ Less

Submitted 29 April, 2021; v1 submitted 2 January, 2021; originally announced January 2021.

Comments: 24 pages. Appendix D was added and minor corrections and changes were made

MSC Class: 46L54; 81P45

Densest binary sphere packings and phase diagram : revisited

Authors: Ryotaro Koshoji, Mitsuaki Kawamura, Masahiro Fukuda, Taisuke Ozaki

Abstract: We revisit the densest binary sphere packings (DBSP) under the periodic boundary conditions and present an updated phase diagram, including newly found 12 putative densest structures over the $x - α$ plane, where $x$ is the relative concentration and $α$ is the radius ratio of the small and large spheres. To efficiently explore the DBSP, we develop an unbiased random search approach based on both… ▽ More We revisit the densest binary sphere packings (DBSP) under the periodic boundary conditions and present an updated phase diagram, including newly found 12 putative densest structures over the $x - α$ plane, where $x$ is the relative concentration and $α$ is the radius ratio of the small and large spheres. To efficiently explore the DBSP, we develop an unbiased random search approach based on both the piling up method to generate initial structures in an unbiased way and the iterative balance method to optimize the volume of a unit cell while keeping the overlap of hard spheres minimized. With those two methods, we have discovered 12 putative DBSP and thereby the phase diagram is updated, while our results are consistent with those of the previous study [Hopkins et al., Phys. Rev. E 85, 021130 (2012)] with a small correction for the case of 12 or fewer spheres in the unit cell. The 5 of the new 12 densest packings are discovered in the small radius range of $0.42 \le α\le 0.50$ where several structures are competitive to each other with respect to packing fraction. Through the exhaustive search, diverse dense packings are discovered and accordingly we find that packing structures achieve high packing fractions by introducing distortion and/or combining a few local dense structural units. Furthermore, we investigate the correspondence of the DBSP with crystals based on the space group. The result shows that many structural units in real crystals, e.g., $\mathrm{LaH_{10}}$ and $\mathrm{SrGe_{2-δ}}$ being high-pressure phases, can be understood as DBSP. The correspondence implies that the densest sphere packings can be used effectively as structural prototypes for searching complex crystal structures, especially for high-pressure phases. △ Less

Submitted 14 October, 2020; originally announced October 2020.

Comments: 25 pages and 20 figures

Journal ref: Phys. Rev. E 103, 023307 (2021)

Exact SDP relaxations of quadratically constrained quadratic programs with forest structures

Authors: Godai Azuma, Mituhiro Fukuda, Sunyoung Kim, Makoto Yamashita

Abstract: We study the exactness of the semidefinite programming (SDP) relaxation of quadratically constrained quadratic programs (QCQPs). With the aggregate sparsity matrix from the data matrices of a QCQP with $n$ variables, the rank and positive semidefiniteness of the matrix are examined. We prove that if the rank of the aggregate sparsity matrix is not less than $n-1$ and the matrix remains positive se… ▽ More We study the exactness of the semidefinite programming (SDP) relaxation of quadratically constrained quadratic programs (QCQPs). With the aggregate sparsity matrix from the data matrices of a QCQP with $n$ variables, the rank and positive semidefiniteness of the matrix are examined. We prove that if the rank of the aggregate sparsity matrix is not less than $n-1$ and the matrix remains positive semidefinite after replacing some off-diagonal nonzero elements with zeros, then the standard SDP relaxation provides an exact optimal solution for the QCQP under feasibility assumptions. In particular, we demonstrate that QCQPs with forest-structured aggregate sparsity matrix, such as the tridiagonal or arrow-type matrix, satisfy the exactness condition on the rank. The exactness is attained by considering the feasibility of the dual SDP relaxation, the strong duality of SDPs, and a sequence of QCQPs with perturbed objective functions, under the assumption that the feasible region is compact. We generalize our result for a wider class of QCQPs by applying simultaneous tridiagonalization on the data matrices. Moreover, simultaneous tridiagonalization is applied to a matrix pencil so that QCQPs with two constraints can be solved exactly by the SDP relaxation. △ Less

Submitted 19 September, 2020; v1 submitted 5 September, 2020; originally announced September 2020.

MSC Class: 90C20; 90C22; 90C25; 90C26

Central object segmentation by deep learning for fruits and other roundish objects

Authors: Motohisa Fukuda, Takashi Okuno, Shinya Yuki

Abstract: We present CROP (Central Roundish Object Painter), which identifies and paints the object at the center of an RGB image. Primarily CROP works for roundish fruits in various illumination conditions, but surprisingly, it could also deal with images of other organic or inorganic materials, or ones by optical and electron microscopes, although CROP was trained solely by 172 images of fruits. The metho… ▽ More We present CROP (Central Roundish Object Painter), which identifies and paints the object at the center of an RGB image. Primarily CROP works for roundish fruits in various illumination conditions, but surprisingly, it could also deal with images of other organic or inorganic materials, or ones by optical and electron microscopes, although CROP was trained solely by 172 images of fruits. The method involves image segmentation by deep learning, and the architecture of the neural network is a deeper version of the original U-Net. This technique could provide us with a means of automatically collecting statistical data of fruit growth in farms. As an example, we describe our experiment of processing 510 time series photos automatically to collect the data on the size and the position of the target fruit. Our trained neural network CROP and the above automatic programs are available on GitHub with user-friendly interface programs. △ Less

Submitted 6 December, 2020; v1 submitted 3 August, 2020; originally announced August 2020.

Comments: The version 2 contains a new section about the automatic processing of time series photos. All the programs are available at https://github.com/MotohisaFukuda/CROP

Journal ref: Sensors 2021, 21(21), 6999

Unfolding optical transition weights of impurity materials for first-principles LCAO electronic structure calculations

Authors: Yung-Ting Lee, Chi-Cheng Lee, Masahiro Fukuda, Taisuke Ozaki

Abstract: A method to analyze optical transitions is developed by combining the Kubo-Greenwood formula with the unfolding method to construct an unfolded electronic band structure with optical transition weights, which allows us to investigate how optical transitions are perturbed by imperfections such as impurity, vacancy, and structural distortions. Based on the Kubo-Greenwood formula, we first calculate… ▽ More A method to analyze optical transitions is developed by combining the Kubo-Greenwood formula with the unfolding method to construct an unfolded electronic band structure with optical transition weights, which allows us to investigate how optical transitions are perturbed by imperfections such as impurity, vacancy, and structural distortions. Based on the Kubo-Greenwood formula, we first calculate frequency-dependent optical conductivity based on the first-principles electronic structure calculations using the linear combinations of atomic orbitals. Benefiting from the atomic orbital basis sets, the frequency-dependent optical conductivity can be traced back to their individual components before summations over all of $k$ points and bands. As a result, optical transition weights of the material can be put on the unfolded electronic band structure to show contributions at different $k$ points and bands. This method is especially useful to study the effects of broken symmetry in the optical transitions due to presence of impurities in the materials. As a demonstration, decomposed optical transition weights of a monolayer Si-doped graphene are shown in the electronic band structure. △ Less

Submitted 28 August, 2020; v1 submitted 29 June, 2020; originally announced June 2020.

Comments: 9 pages, 6 figures, and 1 table

Journal ref: Phys. Rev. B 102, 075143 (2020)

Determination of symmetry energy from experimental and observational constraints; prediction on CREX

Authors: Shingo Tagami, Nobutoshi Yasutake, Mitsunori Fukuda, Jun Matsui, Masanobu Yahiro

Abstract: Taking $r_{\rm skin}^{208}({\rm PREX})=0.33^{+0.16}_{-0.18}~{\rm fm}$ as an experimental constraint and $M_{\rm max}^{\rm NS} \ge 2{\rm M}_{\rm sun}$ as an observational (astrophysical) constraint, we determine an indisputable range for $J$, $L$, $K_{\rm sym}$ defined in Eq.~\eqref{eq-S-sym}. For this purpose, we take a statistical approach. We first accumulate the 206 EoS data from theoretical wo… ▽ More Taking $r_{\rm skin}^{208}({\rm PREX})=0.33^{+0.16}_{-0.18}~{\rm fm}$ as an experimental constraint and $M_{\rm max}^{\rm NS} \ge 2{\rm M}_{\rm sun}$ as an observational (astrophysical) constraint, we determine an indisputable range for $J$, $L$, $K_{\rm sym}$ defined in Eq.~\eqref{eq-S-sym}. For this purpose, we take a statistical approach. We first accumulate the 206 EoS data from theoretical works and take correlation between $r_{\rm skin}^{208}$ and $L$ for the 206 EoSs, where 7 Gogny EoSs are obtained by our calculations. Since the correlation coefficient is $R = 0.99$, we can regard $L$ as a function of $r_{\rm skin}^{208}$, so that we succeed in deducing an empirical constraint $L=31-161$~MeV from $r_{\rm skin}^{208}({\rm PREX})=0.15-0.49$~fm. For the 47 EoSs satisfying the observational constraint, 46 EoSs satisfy the empirical constraint. The 46 EoSs yield $J=29-44$~MeV, $L= 37-135$~MeV, $K_{\rm sym}=(-137)-(160)$~MeV. The is a primary result. When we take correlation between $r_{\rm skin}^{48}$ and $r_{\rm skin}^{208}$ for the 206 EoSs, $R$ is 0.99. The $r_{\rm skin}^{48}$--$r_{\rm skin}^{208}$ relation allows us to transform $r_{\rm skin}^{208}({\rm PREX})$ into the corresponding data on $r_{\rm skin}^{48}$ In order to estimate a value of $r_{\rm skin}^{48}$ for ongoing CREX, we take the weighted mean and its error of two present data on $r_{\rm skin}^{48}$ and transformed PREX value on $r_{\rm skin}^{48}$. The weighted mean is $r_{\rm skin}^{48}=0.17$~fm. This is a prediction for the central value of CREX. △ Less

Submitted 20 January, 2022; v1 submitted 13 March, 2020; originally announced March 2020.

Non-Stationary Ruijsenaars Functions for $κ=t^{-1/N}$ and Intertwining Operators of Ding-Iohara-Miki Algebra

Authors: Masayuki Fukuda, Yusuke Ohkubo, Jun'ichi Shiraishi

Abstract: We construct the non-stationary Ruijsenaars functions (affine analogue of the Macdonald functions) in the special case $κ=t^{-1/N}$, using the intertwining operators of the Ding-Iohara-Miki algebra (DIM algebra) associated with $N$-fold Fock tensor spaces. By the $S$-duality of the intertwiners, another expression is obtained for the non-stationary Ruijsenaars functions with $κ=t^{-1/N}$, which ca… ▽ More We construct the non-stationary Ruijsenaars functions (affine analogue of the Macdonald functions) in the special case $κ=t^{-1/N}$, using the intertwining operators of the Ding-Iohara-Miki algebra (DIM algebra) associated with $N$-fold Fock tensor spaces. By the $S$-duality of the intertwiners, another expression is obtained for the non-stationary Ruijsenaars functions with $κ=t^{-1/N}$, which can be regarded as a natural elliptic lift of the asymptotic Macdonald functions to the multivariate elliptic hypergeometric series. We also investigate some properties of the vertex operator of the DIM algebra appearing in the present algebraic framework; an integral operator which commutes with the elliptic Ruijsenaars operator, and the degeneration of the vertex operators to the Virasoro primary fields in the conformal limit $q \rightarrow 1$. △ Less

Submitted 18 November, 2020; v1 submitted 1 February, 2020; originally announced February 2020.

Journal ref: SIGMA 16 (2020), 116, 55 pages

Nearly optimal first-order methods for convex optimization under gradient norm measure: An adaptive regularization approach

Authors: Masaru Ito, Mituhiro Fukuda

Abstract: In the development of first-order methods for smooth (resp., composite) convex optimization problems, where smooth functions with Lipschitz continuous gradients are minimized, the gradient (resp., gradient mapping) norm becomes a fundamental optimality measure. Under this measure, a fixed iteration algorithm with the optimal iteration complexity is known, while determining this number of iteration… ▽ More In the development of first-order methods for smooth (resp., composite) convex optimization problems, where smooth functions with Lipschitz continuous gradients are minimized, the gradient (resp., gradient mapping) norm becomes a fundamental optimality measure. Under this measure, a fixed iteration algorithm with the optimal iteration complexity is known, while determining this number of iteration to obtain a desired accuracy requires the prior knowledge of the distance from the initial point to the optimal solution set. In this paper, we report an adaptive regularization approach, which attains the nearly optimal iteration complexity without knowing the distance to the optimal solution set. To obtain further faster convergence adaptively, we secondly apply this approach to construct a first-order method that is adaptive to the Hölderian error bound condition (or equivalently, the Łojasiewicz gradient property), which covers moderately wide classes of applications. The proposed method attains nearly optimal iteration complexity with respect to the gradient mapping norm. △ Less

Submitted 5 October, 2020; v1 submitted 27 December, 2019; originally announced December 2019.

Comments: 29 pages. v2: Minor revision

$g$-matrix folding-model approach to reaction cross sections for scattering of Ca isotopes on a C target

Authors: Shingo Tagami, Masaomi Tanaka, Maya Takechi, Mitsunori Fukuda, Masanobu Yahiro

Abstract: We first predict the ground-state properties of Ca isotopes, using the Gogny-D1S Hartree-Fock-Bogoliubov (GHFB) with and without the angular momentum projection (AMP). We find that $^{64}$Ca is an even-dripline nucleus and $^{59}$Ca is an odd-dripline nucleus, using $A$ dependence of the one-neutron separation energy $S_{1}$ and the two-neutron separation energy, $S_{2}$. As for $S_{1}$, $S_{2}$ a… ▽ More We first predict the ground-state properties of Ca isotopes, using the Gogny-D1S Hartree-Fock-Bogoliubov (GHFB) with and without the angular momentum projection (AMP). We find that $^{64}$Ca is an even-dripline nucleus and $^{59}$Ca is an odd-dripline nucleus, using $A$ dependence of the one-neutron separation energy $S_{1}$ and the two-neutron separation energy, $S_{2}$. As for $S_{1}$, $S_{2}$ and the binding energies $E_{\rm B}$, our results agree with the experimental data in $^{40-58}$Ca. As other ground-state properties of $^{40-60,62,64}$Ca, we predict charge, proton, neutron, matter radii, neutron skin and deformation. As for charge radii, our results are consistent with the experimental data in $^{40-52}$Ca. For $^{48}$Ca, our results on proton, neutron, matter radii agree with the experimental data. Very lately, Tanaka et. al. measured interaction cross sections for $^{42-51}$Ca scattering on a $^{12}$C target at an incident energy per nucleon of $E_{\rm lab}=280$MeV. Secondly, we predict reaction cross sections $σ_{\rm R}$ for $^{40-60,62,64}$Ca, using a chiral $g$-matrix double-folding model (DFM). To show the reliability of the present DFM for $σ_{\rm R}$, we apply the DFM for the data on $^{12}$C scattering on $^{9}$Be, $^{12}$C, $^{27}$Al targets in $30 < E_{\rm lab} < 400 $MeV, and show that the present DFM is good in $30 < E_{\rm lab} < 100 $MeV and $250 < E_{\rm lab} < 400 $MeV. For $110 < E_{\rm lab} < 240 $MeV, our results have small errors. To improve the present DFM for $σ_{\rm R}$, we propose two prescriptions. △ Less

Submitted 4 January, 2020; v1 submitted 13 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. C 101, 014620 (2020)

Swelling of doubly magic $^{48}$Ca core in Ca isotopes beyond $N=28$

Authors: M. Tanaka, M. Takechi, A. Homma, M. Fukuda, D. Nishimura, T. Suzuki, Y. Tanaka, T. Moriguchi, D. S. Ahn, A. Aimaganbetov, M. Amano, H. Arakawa, S. Bagchi, K. -H. Behr, N. Burtebayev, K. Chikaato, H. Du, S. Ebata, T. Fujii, N. Fukuda, H. Geissel, T. Hori, W. Horiuchi, S. Hoshino, R. Igosawa , et al. (45 additional authors not shown)

Abstract: Interaction cross sections for $^{42\textrm{-}51}$Ca on a carbon target at 280 MeV/nucleon have been measured for the first time. The neutron number dependence of derived root-mean-square matter radii shows a significant increase beyond the neutron magic number $N=28$. Furthermore, this enhancement of matter radii is much larger than that of the previously measured charge radii, indicating a novel… ▽ More Interaction cross sections for $^{42\textrm{-}51}$Ca on a carbon target at 280 MeV/nucleon have been measured for the first time. The neutron number dependence of derived root-mean-square matter radii shows a significant increase beyond the neutron magic number $N=28$. Furthermore, this enhancement of matter radii is much larger than that of the previously measured charge radii, indicating a novel growth in neutron skin thickness. A simple examination based on the Fermi-type distribution, and the Mean-Field calculations point out that this anomalous enhancement of the nuclear size beyond $N=28$ results from an enlargement of the core by a sudden increase in the surface diffuseness of the neutron density distribution, which implies the swelling of the bare $^{48}$Ca core in Ca isotopes beyond $N=28$. △ Less

Submitted 12 November, 2019; originally announced November 2019.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Lett. 124, 102501 (2020)

Structure map of AB$_2$ type 2D materials by high-throughput DFT calculations

Authors: Masahiro Fukuda, Jingning Zhang, Yung-Ting Lee, Taisuke Ozaki

Abstract: By high-throughput calculations based on the density functional theory, we construct a structure map for AB$_2$ type monolayers of 3844 compounds which are all the combinations of 62 elements selected from the periodic table. The structure map and its web version (www.openmx-square.org/2d-ab2/) provide comprehensive structural trends of the 3844 compounds in two dimensional (2D) structures, and pr… ▽ More By high-throughput calculations based on the density functional theory, we construct a structure map for AB$_2$ type monolayers of 3844 compounds which are all the combinations of 62 elements selected from the periodic table. The structure map and its web version (www.openmx-square.org/2d-ab2/) provide comprehensive structural trends of the 3844 compounds in two dimensional (2D) structures, and predict correctly structures of most of existing 2D compounds such as transition metal dichalcogenides and MXenes having 1T or 1H type structures. We also summarize all the families of 1T/1H type AB$_2$ monolayers for each combination of groups in the periodic table on the basis of our structure map, and propose new types of structures such as a memory structure, which may be a candidate material for data storage applications with an extremely high areal density. In addition, planar and distorted planar structures and other geometrically characteristic structures are found through the high-throughput calculations. These characteristic structures might give new viewpoints and directions to search unknown 2D materials. Our structure map and database will promote efforts towards synthesizing undiscovered 2D materials experimentally and investigating properties of the new structures theoretically. △ Less

Submitted 12 April, 2019; originally announced April 2019.

Comments: 56 pages, 12 figures, 10 tables

Generalized Macdonald Functions on Fock Tensor Spaces and Duality Formula for Changing Preferred Direction

Authors: Masayuki Fukuda, Yusuke Ohkubo, Jun'ichi Shiraishi

Abstract: An explicit formula is obtained for the generalized Macdonald functions on the $N$-fold Fock tensor spaces, calculating a certain matrix element of a composition of several screened vertex operators. As an application, we prove the factorization property of the arbitrary matrix elements of the multi-valent intertwining operator (or refined topological vertex operator) associated with the Ding--Ioh… ▽ More An explicit formula is obtained for the generalized Macdonald functions on the $N$-fold Fock tensor spaces, calculating a certain matrix element of a composition of several screened vertex operators. As an application, we prove the factorization property of the arbitrary matrix elements of the multi-valent intertwining operator (or refined topological vertex operator) associated with the Ding--Iohara--Miki algebra (DIM algebra) with respect to the generalized Macdonald functions, which was conjectured by Awata, Feigin, Hoshino, Kanai, Yanagida and one of the authors. Our proof is based on the combinatorial and analytic properties of the asymptotic eigenfunctions of the ordinary Macdonald operator of $A$-type, and the Euler transformation formula for Kajihara and Noumi's multiple basic hypergeometric series. That factorization formula provides us with a reasonable algebraic description of the 5D (K-theoretic) Alday-Gaiotto-Tachikawa (AGT) correspondence, and the interpretation of the invariance under the preferred direction from the point of view of the $SL(2,\mathbb{Z})$ duality of the DIM algebra. △ Less

Submitted 23 August, 2019; v1 submitted 14 March, 2019; originally announced March 2019.

Comments: 54 pages, 2 figures

Report number: UT-19-03

Typical entanglement for Gaussian states

Authors: Motohisa Fukuda, Robert Koenig

Abstract: We consider ensembles of bipartite states resulting from a random passive Gaussian unitary applied to a fiducial pure Gaussian state. We show that the symplectic spectra of the reduced density operators concentrate around that of a thermal state with the same energy. This implies, in particular, concentration of the entanglement entropy as well as other entropy measures. Our work extends earlier r… ▽ More We consider ensembles of bipartite states resulting from a random passive Gaussian unitary applied to a fiducial pure Gaussian state. We show that the symplectic spectra of the reduced density operators concentrate around that of a thermal state with the same energy. This implies, in particular, concentration of the entanglement entropy as well as other entropy measures. Our work extends earlier results on the typicality of entanglement beyond the two ensembles and the reduced purity measure considered in [A. Serafini, O. C. O. Dahlsten, D. Gross, and M. B. Plenio, J. Phys. A: Math. Theor., 40(31):9551 (2007)]. △ Less

Submitted 29 November, 2019; v1 submitted 11 March, 2019; originally announced March 2019.

Comments: 19pages. Other materials: one Mathematica notebook, two Python files and one PDF file for the manual. V2: ancillary files uploaded, reference corrected

Journal ref: Journal of Mathematical Physics 60, 112203 (2019)

RTNI - A symbolic integrator for Haar-random tensor networks

Authors: Motohisa Fukuda, Robert Koenig, Ion Nechita

Abstract: We provide a computer algebra package called Random Tensor Network Integrator (RTNI). It allows to compute averages of tensor networks containing multiple Haar-distributed random unitary matrices and deterministic symbolic tensors. Such tensor networks are represented as multigraphs, with vertices corresponding to tensors or random unitaries and edges corresponding to tensor contractions. Input an… ▽ More We provide a computer algebra package called Random Tensor Network Integrator (RTNI). It allows to compute averages of tensor networks containing multiple Haar-distributed random unitary matrices and deterministic symbolic tensors. Such tensor networks are represented as multigraphs, with vertices corresponding to tensors or random unitaries and edges corresponding to tensor contractions. Input and output spaces of random unitaries may be subdivided into arbitrary tensor factors, with dimensions treated symbolically. The algorithm implements the graphical Weingarten calculus and produces a weighted sum of tensor networks representing the average over the unitary group. We illustrate the use of this algorithmic tool on some examples from quantum information theory, including entropy calculations for random tensor network states as considered in toy models for holographic duality. Mathematica and Python implementations are supplied. △ Less

Submitted 22 February, 2019; originally announced February 2019.

Comments: Code available (for Mathematica and python) at https://github.com/MotohisaFukuda/RTNI

Journal ref: J. Phys. A: Math. Theor. 52, 425303 (2019)

The Compact Linear Collider (CLIC) - 2018 Summary Report

Authors: The CLIC, CLICdp collaborations, :, T. K. Charles, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, C. Balazs, K. Afanaciev, V. Makarenko, A. Patapenka, I. Zhuk, C. Collette, M. J. Boland, A. C. Abusleme Hoffman, M. A. Diaz, F. Garay, Y. Chi, X. He, G. Pei, S. Pei, G. Shu, X. Wang, J. Zhang , et al. (671 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the… ▽ More The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years. △ Less

Submitted 6 May, 2019; v1 submitted 14 December, 2018; originally announced December 2018.

Comments: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petrič, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Report number: CERN-2018-005-M

A dual spectral projected gradient method for log-determinant semidefinite problems

Authors: Takashi Nakagaki, Mituhiro Fukuda, Sunyoung Kim, Makoto Yamashita

Abstract: We extend the result on the spectral projected gradient method by Birgin et al. in 2000 to a log-determinant semidefinite problem (SDP) with linear constraints and propose a spectral projected gradient method for the dual problem. Our method is based on alternate projections on the intersection of two convex sets, which first projects onto the box constraints and then onto a set defined by a linea… ▽ More We extend the result on the spectral projected gradient method by Birgin et al. in 2000 to a log-determinant semidefinite problem (SDP) with linear constraints and propose a spectral projected gradient method for the dual problem. Our method is based on alternate projections on the intersection of two convex sets, which first projects onto the box constraints and then onto a set defined by a linear matrix inequality. By exploiting structures of the two projections, we show the same convergence properties can be obtained for the proposed method as Birgin's method where the exact orthogonal projection onto the intersection of two convex sets is performed. Using the convergence properties, we prove that the proposed algorithm attains the optimal value or terminates in a finite number of iterations. The efficiency of the proposed method is illustrated with the numerical results on randomly generated synthetic/deterministic data and gene expression data, in comparison with other methods including the inexact primal-dual path-following interior-point method, the adaptive spectral projected gradient method, and the adaptive Nesterov's smooth method. For the gene expression data, our results are compared with the quadratic approximation for sparse inverse covariance estimation method. We show that our method outperforms the other methods in obtaining a better optimal value fast. △ Less

Submitted 2 December, 2018; originally announced December 2018.

Comments: 25 pages, 5 figures

MSC Class: 90C20; 90C22; 90C25; 90C26

Gluck twists along 2-knots with periodic monodromy

Authors: Mizuki Fukuda

Abstract: The union of singular orbits of an effective locally smooth circle action on the 4-sphere consists of two 2-knots, $K$ and $K^{\prime}$, intersecting at two points transversely. Each of $K$ and $K^{\prime}$ is called a branched twist spin. A twist spun knot is an example of a branched twist spin. The Gluck twists along branched twist spins are studied by Fintushel, Gordon and Pao. In this paper, w… ▽ More The union of singular orbits of an effective locally smooth circle action on the 4-sphere consists of two 2-knots, $K$ and $K^{\prime}$, intersecting at two points transversely. Each of $K$ and $K^{\prime}$ is called a branched twist spin. A twist spun knot is an example of a branched twist spin. The Gluck twists along branched twist spins are studied by Fintushel, Gordon and Pao. In this paper, we determine the 2-knot obtained from $K$ by the Gluck twist along $K^{\prime}$. As an application, we give infinitely many pairs of inequivalent branched twist spins whose complements are homeomorphic. △ Less

Submitted 13 November, 2018; originally announced November 2018.

Comments: 11pages, 6 figures

Dominance of tensor correlations in high-momentum nucleon pairs studied by (p,pd) reaction

Authors: S. Terashima, L. Yu, H. J. Ong, I. Tanihata, S. Adachi, N. Aoi, P. Y. Chan, H. Fujioka, M. Fukuda, H. Geissel, G. Gey, J. Golak, E. Haettner, C. Iwamoto, T. Kawabata, H. Kamada, X. Y. Le, H. Sakaguchi, A. Sakaue, C. Scheidenberger, R. Skibinski, B. H. Sun, A. Tamii, T. L. Tang, D. T. Tran , et al. (7 additional authors not shown)

Abstract: The isospin character of p-n pairs at large relative momentum has been observed for the first time in the 16O ground state. A strong population of the J,T=1,0 state and a very weak population of the J,T=0,1 state were observed in neutron pick up domain of 16O(p,pd) at 392 MeV. This strong isospin dependence at large momentum transfer is not reproduced by the distorted-wave impulse approximation ca… ▽ More The isospin character of p-n pairs at large relative momentum has been observed for the first time in the 16O ground state. A strong population of the J,T=1,0 state and a very weak population of the J,T=0,1 state were observed in neutron pick up domain of 16O(p,pd) at 392 MeV. This strong isospin dependence at large momentum transfer is not reproduced by the distorted-wave impulse approximation calculations with known spectroscopic amplitudes. The results indicate the presence of high-momentum protons and neutrons induced by the tensor interactions in ground state of 16O. △ Less

Submitted 9 November, 2018; v1 submitted 5 November, 2018; originally announced November 2018.

Comments: 12 pages, 4 figures, accepted for publication in Physical Review Letters

Journal ref: Phys. Rev. Lett. 121(2018) 242501

DE/PSO-aided Hybrid Linear Detectors for MIMO-OFDM Systems under Correlated Arrays

Authors: Rafael Masashi Fukuda, David William Marques Guerra, Ricardo Tadashi Kobayashi, Taufik Abrao

Abstract: In this paper, we analyze the performance of evolutionary heuristic-aided linear detectors deployed in Multiple-Input Multiple-Output (MIMO) Orthogonal Frequency-Division Multiplexing (OFDM) systems, considering realistic operating scenarios. Hybrid linear-heuristic detectors under different initial solutions provided by linear detectors are considered, namely differential evolution (DE) and parti… ▽ More In this paper, we analyze the performance of evolutionary heuristic-aided linear detectors deployed in Multiple-Input Multiple-Output (MIMO) Orthogonal Frequency-Division Multiplexing (OFDM) systems, considering realistic operating scenarios. Hybrid linear-heuristic detectors under different initial solutions provided by linear detectors are considered, namely differential evolution (DE) and particle swarm optimization (PSO). Numerical results demonstrated the applicability of hybrid detection approach, which can improve considerably the performance of minimum mean-square error (MMSE) and matched filter (MF) detectors. Furthermore, we discuss how the complexity of the presented algorithms scales with the number of antennas, besides of verifying the spatial correlation effects on MIMO-OFDM performance assisted by linear, heuristic and hybrid detection schemes. The influence of the initial point in the performance improvement and complexity reduction is evaluated numerically. △ Less

Submitted 3 October, 2018; originally announced October 2018.

Comments: 19 pages, 7 figures and 5 tables

Efficient Detectors for MIMO-OFDM Systems under Spatial Correlation Antenna Arrays

Authors: David William Marques Guerra, Rafael Masashi Fukuda, Ricardo Tadashi Kobayashi, Taufik Abrao

Abstract: This work analyzes the performance of the implementable detectors for multiple-input-multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) technique under specific and realistic operation system condi- tions, including antenna correlation and array configuration. Time-domain channel model has been used to evaluate the system performance under realistic communication channel and… ▽ More This work analyzes the performance of the implementable detectors for multiple-input-multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) technique under specific and realistic operation system condi- tions, including antenna correlation and array configuration. Time-domain channel model has been used to evaluate the system performance under realistic communication channel and system scenarios, including different channel correlation, modulation order and antenna arrays configurations. A bunch of MIMO-OFDM detectors were analyzed for the purpose of achieve high performance combined with high capacity systems and manageable computational complexity. Numerical Monte-Carlo simulations (MCS) demonstrate the channel selectivity effect, while the impact of the number of antennas, adoption of linear against heuristic-based detection schemes, and the spatial correlation effect under linear and planar antenna arrays are analyzed in the MIMO-OFDM context. △ Less

Submitted 2 October, 2018; originally announced October 2018.

Comments: 26 pgs, 16 figures and 5 tables

Journal ref: ETRI Journal, Vol. 40, Issue 5, October 2018, Pages 570-581

Efficient O($N$) divide-conquer method with localized natural orbitals

Authors: Taisuke Ozaki, Masahiro Fukuda, Gengping Jiang

Abstract: An efficient O($N$) divide-conquer (DC) method based on localized natural orbitals (LNOs) is presented for large-scale density functional theories (DFT) calculations of gapped and metallic systems. The LNOs are non-iteratively calculated by a low-rank approximation via a local eigendecomposition of a projection operator for the occupied space. Introducing LNOs to represent the long range region of… ▽ More An efficient O($N$) divide-conquer (DC) method based on localized natural orbitals (LNOs) is presented for large-scale density functional theories (DFT) calculations of gapped and metallic systems. The LNOs are non-iteratively calculated by a low-rank approximation via a local eigendecomposition of a projection operator for the occupied space. Introducing LNOs to represent the long range region of a truncated cluster reduces the computational cost of the DC method while keeping computational accuracy. A series of benchmark calculations and high parallel efficiency in a multilevel parallelization clearly demonstrate that the O($N$) method enables us to perform large-scale simulations for a wide variety of materials including metals with sufficient accuracy in accordance with development of massively parallel computers. △ Less

Submitted 14 September, 2018; originally announced September 2018.

Comments: 14 pages, 9 figures

Journal ref: Phys. Rev. B 98, 245137 (2018)

Tight-binding calculations of optical matrix elements for conductivity using non-orthogonal atomic orbitals: Anomalous Hall conductivity in bcc Fe

Authors: Chi-Cheng Lee, Yung-Ting Lee, Masahiro Fukuda, Taisuke Ozaki

Abstract: We present a general formula for the tight-binding representation of momentum matrix elements needed for calculating the conductivity based on the Kubo-Greenwood formula using atomic orbitals, which are in general not orthogonal to other orbitals at different sites. In particular, the position matrix element is demonstrated to be important for delivering the exact momentum matrix element. This gen… ▽ More We present a general formula for the tight-binding representation of momentum matrix elements needed for calculating the conductivity based on the Kubo-Greenwood formula using atomic orbitals, which are in general not orthogonal to other orbitals at different sites. In particular, the position matrix element is demonstrated to be important for delivering the exact momentum matrix element. This general formula, applicable to both orthonormal and non-orthonormal bases, solely needs the information of the position matrix elements and the ingredients that have already contained in the tight-binding representation. We then study the anomalous Hall conductivity in the standard example, ferromagnetic bcc Fe, by a first-principles tight-binding Hamiltonian. By assuming the commutation relation $\hat{\vec{p}} = (i m_e/\hbar) [\hat{H},\hat{\vec{r}}]$, the obtained frequency-dependent Hall conductivity is found to be in good agreement with existing theoretical and experimental results. Better agreement with experiments can be reached by introducing a reasonable bandwidth renormalization, evidencing the strong correlation among 3$d$ orbitals in bcc Fe. Since a tight-binding Hamiltonian can be straightforwardly obtained after finishing a first-principles calculation using atomic basis functions that are generated before the self-consistent calculation, the derived formula is particularly useful for those first-principles calculations. △ Less

Submitted 7 August, 2018; v1 submitted 22 May, 2018; originally announced May 2018.

Comments: 8 pages, 2 figures

Journal ref: Phys. Rev. B 98, 115115 (2018)

Gauge anomaly with vector and axial-vector fields in six dimensional curved space

Authors: Satoshi Yajima, Kohei Eguchi, Makoto Fukuda, Tomonori Oka

Abstract: Imposing the conservation equation of the vector current for a fermion of spin $\frac{1}{2}$ at the quantum level, a gauge anomaly for the fermion coupling with non-Abelian vector and axial--vector fields in six--dimensional curved space is expressed in tensorial form. The anomaly consists of terms that resemble the chiral U(1) anomaly and the commutator terms that disappear if the axial--vector f… ▽ More Imposing the conservation equation of the vector current for a fermion of spin $\frac{1}{2}$ at the quantum level, a gauge anomaly for the fermion coupling with non-Abelian vector and axial--vector fields in six--dimensional curved space is expressed in tensorial form. The anomaly consists of terms that resemble the chiral U(1) anomaly and the commutator terms that disappear if the axial--vector field is Abelian. △ Less

Submitted 27 February, 2018; v1 submitted 15 January, 2018; originally announced January 2018.

Comments: 12 pages

Journal ref: Prog Theor Exp Phys (2018)

Operator product expansion for conformal defects

Authors: Masayuki Fukuda, Nozomu Kobayashi, Tatsuma Nishioka

Abstract: We study the operator product expansion (OPE) for scalar conformal defects of any codimension in CFT. The OPE for defects is decomposed into "defect OPE blocks", the irreducible representations of the conformal group, each of which packages the contribution from a primary operator and its descendants. We use the shadow formalism to deduce an integral representation of the defect OPE blocks. They a… ▽ More We study the operator product expansion (OPE) for scalar conformal defects of any codimension in CFT. The OPE for defects is decomposed into "defect OPE blocks", the irreducible representations of the conformal group, each of which packages the contribution from a primary operator and its descendants. We use the shadow formalism to deduce an integral representation of the defect OPE blocks. They are shown to obey a set of constraint equations that can be regarded as equations of motion for a scalar field propagating on the moduli space of the defects. By employing the Radon transform between the AdS space and the moduli space, we obtain a formula of constructing an AdS scalar field from the defect OPE block for a conformal defect of any codimension in a scalar representation of the conformal group, which turns out to be the Euclidean version of the HKLL formula. We also introduce a duality between conformal defects of different codimensions and prove the equivalence between the defect OPE block for codimension-two defects and the OPE block for a pair of local operators. △ Less

Submitted 10 November, 2017; v1 submitted 30 October, 2017; originally announced October 2017.

Comments: 47 pages, v2: a reference added

Report number: UT-17-33, IPMU17-150

Evidence for Z=6 `magic number' in neutron-rich carbon isotopes

Authors: D. T. Tran, H. J. Ong, G. Hagen, T. D. Morris, N. Aoi, T. Suzuki, Y. Kanada-En'yo, L. S. Geng, S. Terashima, I. Tanihata, T. T. Nguyen, Y. Ayyad, P. Y. Chan, M. Fukuda, H. Geissel, M. N. Harakeh, T. Hashimoto, T. H. Hoang, E. Ideguchi, A. Inoue, G. R. Jansen, R. Kanungo, T. Kawabata, L. H. Khiem, W. P. Lin , et al. (15 additional authors not shown)

Abstract: The nuclear shell structure, which originates in the nearly independent motion of nucleons in an average potential, provides an important guide for our understanding of nuclear structure and the underlying nuclear forces. Its most remarkable fingerprint is the existence of the so-called `magic numbers' of protons and neutrons associated with extra stability. Although the introduction of a phenomen… ▽ More The nuclear shell structure, which originates in the nearly independent motion of nucleons in an average potential, provides an important guide for our understanding of nuclear structure and the underlying nuclear forces. Its most remarkable fingerprint is the existence of the so-called `magic numbers' of protons and neutrons associated with extra stability. Although the introduction of a phenomenological spin-orbit (SO) coupling force in 1949 helped explain the nuclear magic numbers, its origins are still open questions. Here, we present experimental evidence for the smallest SO-originated magic number (subshell closure) at the proton number 6 in 13-20C obtained from systematic analysis of point-proton distribution radii, electromagnetic transition rates and atomic masses of light nuclei. Performing ab initio calculations on 14,15C, we show that the observed proton distribution radii and subshell closure can be explained by the state-of-the-art nuclear theory with chiral nucleon-nucleon and three-nucleon forces, which are rooted in the quantum chromodynamics. △ Less

Submitted 11 September, 2017; originally announced September 2017.

Comments: 7 pages, 5 figures

Reflection states in Ding-Iohara-Miki algebra and brane-web for D-type quiver

Authors: Jean-Emile Bourgine, Masayuki Fukuda, Yutaka Matsuo, Rui-Dong Zhu

Abstract: Reflection states are introduced in the vertical and horizontal modules of the Ding-Iohara-Miki (DIM) algebra (quantum toroidal $\mathfrak{gl}_1$). Webs of DIM representations are in correspondence with $(p,q)$-web diagrams of type IIB string theory, under the identification of the algebraic intertwiner of Awata, Feigin and Shiraishi with the refined topological vertex. Extending the correspondenc… ▽ More Reflection states are introduced in the vertical and horizontal modules of the Ding-Iohara-Miki (DIM) algebra (quantum toroidal $\mathfrak{gl}_1$). Webs of DIM representations are in correspondence with $(p,q)$-web diagrams of type IIB string theory, under the identification of the algebraic intertwiner of Awata, Feigin and Shiraishi with the refined topological vertex. Extending the correspondence to the vertical reflection states, it is possible to engineer the $\mathcal{N}=1$ quiver gauge theory of D-type (with unitary gauge groups). In this way, the Nekrasov instanton partition function is reproduced from the evaluation of expectation values of intertwiners. This computation leads to the identification of the vertical reflection state with the orientifold plane of string theory. We also provide a translation of this construction in the Iqbal-Kozcaz-Vafa refined topological vertex formalism. △ Less

Submitted 17 October, 2017; v1 submitted 6 September, 2017; originally announced September 2017.

Comments: 27 pages, 11 figures. Details of translation in terms of IKV refined topological vertex added in the second version

Report number: KIAS-Q17026; UT-17-30

Journal ref: J. High Energ. Phys. (2017) 2017: 15

Realization of intrinsically broken Dirac cones in graphene via the momentum-resolved electronic band structure

Authors: Chi-Cheng Lee, Masahiro Fukuda, Yung-Ting Lee, Taisuke Ozaki

Abstract: A way to represent the band structure that distinguishes between energy-momentum and energy-crystal momentum relationships is proposed upon the band-unfolding concept. This momentum-resolved band structure offers better understanding of the physical processes requiring the information of wave functions in momentum space and provides a good description of angle-resolved photoelectron spectroscopy (… ▽ More A way to represent the band structure that distinguishes between energy-momentum and energy-crystal momentum relationships is proposed upon the band-unfolding concept. This momentum-resolved band structure offers better understanding of the physical processes requiring the information of wave functions in momentum space and provides a good description of angle-resolved photoelectron spectroscopy (ARPES) spectra together with a still informative band structure. Following this approach, we demonstrate that Dirac cones in graphene are intrinsically broken in momentum space and can be described by a conceptual unit cell smaller than the primitive unit cell. This hidden degree of freedom can be measured by ARPES experiments as missing weight that is retrievable by probing the chirality and Berry phases by linearly and circularly polarized light. Having the energy-momentum relationship, we provide alternative understanding of the retrieved momentum intensity, that is, the retrieved momentum intensity is assisted with the properties of final states, not from the Dirac cones directly. The revealed broken Dirac cones and momenta supplied by the lattice give interesting ingredients for designing advanced nanodevices. △ Less

Submitted 12 April, 2018; v1 submitted 9 July, 2017; originally announced July 2017.

Comments: 6 pages, 2 figures

Journal ref: J. Phys.: Condens. Matter 30, 295502 (2018)

Maulik-Okounkov's R-matrix from Ding-Iohara-Miki algebra

Authors: Masayuki Fukuda, Koichi Harada, Yutaka Matsuo, Rui-Dong Zhu

Abstract: The integrability of 4d $\mathcal{N}=2$ gauge theories has been explored in various contexts, for example the Seiberg-Witten curve and its quantization. Recently, Maulik and Okounkov proposed that an integrable lattice model is associated with the gauge theory, through an R-matrix, to which we refer as MO's R-matrix in this paper, constructed in the instanton moduli space. In this paper, we study… ▽ More The integrability of 4d $\mathcal{N}=2$ gauge theories has been explored in various contexts, for example the Seiberg-Witten curve and its quantization. Recently, Maulik and Okounkov proposed that an integrable lattice model is associated with the gauge theory, through an R-matrix, to which we refer as MO's R-matrix in this paper, constructed in the instanton moduli space. In this paper, we study the R-matrix using the Ding-Iohara-Miki (DIM) algebra. We provide a concrete boson realization of the universal R-matrix in DIM and show that the defining conditions for MO's R-matrix can be derived from this free boson oscillator expression. Several consistency checks for the oscillator expression are also performed. △ Less

Submitted 23 May, 2017; v1 submitted 8 May, 2017; originally announced May 2017.

Comments: 23 pages; minor changes in 2nd version

Report number: UT-17-18

Journal ref: Progress of Theoretical and Experimental Physics, Volume 2017, Issue 9 (2017) 093A01

Irreducible $SL(2,\mathbb{C})$-metabelian representations of branched twist spins

Authors: Mizuki Fukuda

Abstract: An $(m,n)$-branched twist spin is a fibered $2$-knot in $S^4$ which is determined by a $1$-knot $K$ and coprime integers $m$ and $n$. For a $1$-knot, Lin proved that the number of irreducible $SL(2,\mathbb{C})$-metabelian representations of the knot group of a $1$-knot up to conjugation is determined by the knot determinant of the $1$-knot. In this paper, we prove that the number of irreducible… ▽ More An $(m,n)$-branched twist spin is a fibered $2$-knot in $S^4$ which is determined by a $1$-knot $K$ and coprime integers $m$ and $n$. For a $1$-knot, Lin proved that the number of irreducible $SL(2,\mathbb{C})$-metabelian representations of the knot group of a $1$-knot up to conjugation is determined by the knot determinant of the $1$-knot. In this paper, we prove that the number of irreducible $SL(2,\mathbb{C})$-metabelian representations of the knot group of an $(m,n)$-branched twist spin up to conjugation is determined by the determinant of a $1$-knot in the orbit space by comparing a presentation of the knot group of the branched twist spin with the Lin's presentation of the knot group of the $1$-knot. △ Less

Submitted 19 May, 2018; v1 submitted 28 April, 2017; originally announced April 2017.

Comments: 9 pages, 1 figure

MSC Class: Primary 57Q45; Secondary 57M60; 57M27

(p,q)-webs of DIM representations, 5d N=1 instanton partition functions and qq-characters

Authors: Jean-Emile Bourgine, Masayuki Fukuda, Koichi Harada, Yutaka Matsuo, Rui-Dong Zhu

Abstract: Instanton partition functions of $\mathcal{N}=1$ 5d Super Yang-Mills reduced on $S^1$ can be engineered in type IIB string theory from the $(p,q)$-branes web diagram. To this diagram is superimposed a web of representations of the Ding-Iohara-Miki (DIM) algebra that acts on the partition function. In this correspondence, each segment is associated to a representation, and the (topological string)… ▽ More Instanton partition functions of $\mathcal{N}=1$ 5d Super Yang-Mills reduced on $S^1$ can be engineered in type IIB string theory from the $(p,q)$-branes web diagram. To this diagram is superimposed a web of representations of the Ding-Iohara-Miki (DIM) algebra that acts on the partition function. In this correspondence, each segment is associated to a representation, and the (topological string) vertex is identified with the intertwiner operator constructed by Awata, Feigin and Shiraishi. We define a new intertwiner acting on the representation spaces of levels $(1,n)\otimes(0,m)\to(1,n+m)$, thereby generalizing to higher rank $m$ the original construction. It allows us to use a folded version of the usual $(p,q)$-web diagram, bringing great simplifications to actual computations. As a result, the characterization of Gaiotto states and vertical intertwiners, previously obtained by some of the authors, is uplifted to operator relations acting in the Fock space of horizontal representations. We further develop a method to build qq-characters of linear quivers based on the horizontal action of DIM elements. While fundamental qq-characters can be built using the coproduct, higher ones require the introduction of a (quantum) Weyl reflection acting on tensor products of DIM generators. △ Less

Submitted 31 March, 2017; originally announced March 2017.

Comments: 42 pages

Report number: UT-17-12