-
An Analytical Latency Model and Evaluation of the Capacity of 5G NR to Support V2X Services using V2N2V Communications
Authors:
M. C. Lucas-Estañ,
B. Coll-Perales,
T. Shimizu,
J. Gozalvez,
T. Higuchi,
S. Avedisov,
O. Altintas,
M. Sepulcre
Abstract:
5G has been designed to support applications such as connected and automated driving. To this aim, 5G includes a highly flexible New Radio (NR) interface that can be configured to utilize different subcarrier spacings (SCS), slot durations, scheduling, and retransmissions mechanisms. This flexibility can be exploited to support advanced V2X services with strict latency and reliability requirements…
▽ More
5G has been designed to support applications such as connected and automated driving. To this aim, 5G includes a highly flexible New Radio (NR) interface that can be configured to utilize different subcarrier spacings (SCS), slot durations, scheduling, and retransmissions mechanisms. This flexibility can be exploited to support advanced V2X services with strict latency and reliability requirements using V2N2V (Vehicle-to-Network-to-Vehicles) communications instead of direct or sidelink V2V (Vehicle-to-Vehicle). To analyze this possibility, this paper presents a novel analytical model that estimates the latency of 5G at the radio network level. The model accounts for the use of different numerologies (SCS, slot durations and Cyclic Prefixes), modulation and coding schemes, full-slots or mini-slots, semi-static and dynamic scheduling, different retransmission mechanisms, and broadcast/multicast or unicast transmissions. The model has been used to first analyze the impact of different 5G NR radio configurations on the latency. We then identify which radio configurations and scenarios can 5G NR satisfy the latency and reliability requirements of V2X services using V2N2V communications. This paper considers cooperative lane changes as a case study. The results show that 5G can support advanced V2X services at the radio network level using V2N2V communications under certain conditions that depend on the radio configuration, bandwidth, service requirements and cell traffic load.
△ Less
Submitted 1 September, 2022; v1 submitted 16 January, 2022;
originally announced January 2022.
-
End-to-End V2X Latency Modeling and Analysis in 5G Networks
Authors:
B. Coll-Perales,
M. C. Lucas-Estañ,
T. Shimizu,
J. Gozalvez,
T. Higuchi,
S. Avedisov,
O. Altintas,
M. Sepulcre
Abstract:
5G networks provide higher flexibility and improved performance compared to previous cellular technologies. This has raised expectations on the possibility to support advanced V2X services using the cellular network via Vehicle-to-Network (V2N) and V2N2V connections. Replacing direct V2V connections by V2N/V2N2V communications to support critical V2X services requires low V2N/V2N2V latencies. It i…
▽ More
5G networks provide higher flexibility and improved performance compared to previous cellular technologies. This has raised expectations on the possibility to support advanced V2X services using the cellular network via Vehicle-to-Network (V2N) and V2N2V connections. Replacing direct V2V connections by V2N/V2N2V communications to support critical V2X services requires low V2N/V2N2V latencies. It is then necessary to quantify the latency values that V2N and V2N2V connections can achieve over 5G end-to-end (E2E) connections, but these depend on the particular 5G network deployments and configurations and to date the number of related studies is limited. This paper progresses the state-of-the-art by introducing a novel E2E latency model to quantify the latency of 5G V2N/V2N2V communications. The model includes the latency introduced at the radio, transport, core, Internet, peering points and application server (AS) for single MNO and multi-MNO scenarios. This paper estimates the E2E latency for a large variety of possible 5G network deployments that are being discussed or envisioned to support V2X services. This includes the possibility to deploy the V2X AS from the edge of the network to the cloud. The model is utilized to analyze the impact of different 5G network deployments and configurations on the E2E latency. The analysis helps identify which 5G network deployments and configurations are more suitable to meet V2X latency requirements. The conducted analysis highlights the challenge for centralized network deployments that locate the V2X AS at the cloud to meet the latency requirements of advanced V2X services. Locating the V2X AS closer to the cell edge reduces the latency. However, it requires a higher number of ASs and also a careful dimensioning of the network and its configuration to ensure sufficient network and AS resources are dedicated to serve the V2X traffic.
△ Less
Submitted 4 October, 2022; v1 submitted 16 January, 2022;
originally announced January 2022.
-
Adaptive Beamwidth Configuration for Millimeter Wave V2X Scheduling
Authors:
Baldomero Coll-Perales,
Javier Gozalvez,
Esteban Egea-Lopez
Abstract:
Millimeter wave (mmWave) technologies will support the high bandwidth and data rate requirements of V2X services demanded by connected and automated vehicles (CAVs). MmWave V2X technologies will leverage directional antennas that challenge the management of the communications in dynamic scenarios including the identification of available links, beams alignment, and scheduling. Previous studies hav…
▽ More
Millimeter wave (mmWave) technologies will support the high bandwidth and data rate requirements of V2X services demanded by connected and automated vehicles (CAVs). MmWave V2X technologies will leverage directional antennas that challenge the management of the communications in dynamic scenarios including the identification of available links, beams alignment, and scheduling. Previous studies have shown that these challenges can be reduced when mmWave communications are supported by side information like the one transmitted in sub-6GHz V2X technologies. In this context, this paper proposes a beamwidth-aware mmWave scheduling scheme for V2V communications supported by sub-6GHz V2X technologies. The proposal enables mmWave transmitters to schedule a mmWave transmission to several neighboring vehicles at the same time by adapting the beamwidth configuration. In addition, the proposal derives the minimum beamwidth that mmWave transmitters should use to contact their neighboring vehicles in a limited number of scheduling intervals. The obtained results demonstrate that the proposal helps increasing the amount of mmWave data that can be transmitted to neighboring vehicles.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Analytical Models of the Performance of IEEE 802.11p Vehicle to Vehicle Communications
Authors:
Miguel Sepulcre,
Manuel Gonzalez-Martin,
Javier Gozalvez,
Rafael Molina-Masegosa,
Baldomero Coll-Perales
Abstract:
The critical nature of vehicular communications requires their extensive testing and evaluation. Analytical models can represent an attractive and cost-effective approach for such evaluation if they can adequately model all underlying effects that impact the performance of vehicular communications. Several analytical models have been proposed to date to model vehicular communications based on the…
▽ More
The critical nature of vehicular communications requires their extensive testing and evaluation. Analytical models can represent an attractive and cost-effective approach for such evaluation if they can adequately model all underlying effects that impact the performance of vehicular communications. Several analytical models have been proposed to date to model vehicular communications based on the IEEE 802.11p (or DSRC) standard. However, existing models normally model in detail the MAC (Medium Access Control), and generally simplify the propagation and interference effects. This reduces their value as an alternative to evaluate the performance of vehicular communications. This paper addresses this gap, and presents new analytical models that accurately model the performance of vehicle-to-vehicle communications based on the IEEE 802.11p standard. The models jointly account for a detailed modeling of the propagation and interference effects, as well as the impact of the hidden terminal problem. The model quantifies the PDR (Packet Delivery Ratio) as a function of the distance between transmitter and receiver. The paper also presents new analytical models to quantify the probability of the four different types of packet errors in IEEE 802.11p. In addition, the paper presents the first analytical model capable to accurately estimate the Channel Busy Ratio (CBR) metric even under high channel load levels. All the analytical models are validated by means of simulation for a wide range of parameters, including traffic densities, packet transmission frequencies, transmission power levels, data rates and packet sizes. An implementation of the models is provided openly to facilitate their use by the community.
△ Less
Submitted 29 October, 2021; v1 submitted 16 April, 2021;
originally announced April 2021.
-
Prototyping and Evaluation of Infrastructure-Assisted Transition of Control for Cooperative Automated Vehicles
Authors:
Baldomero Coll-Perales,
Joschua Schulte-Tigges,
Michele Rondinone,
Javier Gozalvez,
Michael Reke,
Dominik Matheis,
Thomas Walter
Abstract:
Automated driving is now possible in diverse road and traffic conditions. However, there are still situations that automated vehicles cannot handle safely and efficiently. In this case, a Transition of Control (ToC) is necessary so that the driver takes control of the driving. Executing a ToC requires the driver to get full situation awareness of the driving environment. If the driver fails to get…
▽ More
Automated driving is now possible in diverse road and traffic conditions. However, there are still situations that automated vehicles cannot handle safely and efficiently. In this case, a Transition of Control (ToC) is necessary so that the driver takes control of the driving. Executing a ToC requires the driver to get full situation awareness of the driving environment. If the driver fails to get back the control in a limited time, a Minimum Risk Maneuver (MRM) is executed to bring the vehicle into a safe state (e.g., decelerating to full stop). The execution of ToCs requires some time and can cause traffic disruption and safety risks that increase if several vehicles execute ToCs/MRMs at similar times and in the same area. This study proposes to use novel C-ITS traffic management measures where the infrastructure exploits V2X communications to assist Connected and Automated Vehicles (CAVs) in the execution of ToCs. The infrastructure can suggest a spatial distribution of ToCs, and inform vehicles of the locations where they could execute a safe stop in case of MRM. This paper reports the first field operational tests that validate the feasibility and quantify the benefits of the proposed infrastructure-assisted ToC and MRM management. The paper also presents the CAV and roadside infrastructure prototypes implemented and used in the trials. The conducted field trials demonstrate that infrastructure-assisted traffic management solutions can reduce safety risks and traffic disruptions.
△ Less
Submitted 24 March, 2021;
originally announced March 2021.
-
A Tutorial on 5G NR V2X Communications
Authors:
Mario H. Castañeda Garcia,
Alejandro Molina-Galan,
Mate Boban,
Javier Gozalvez,
Baldomero Coll-Perales,
Taylan Şahin,
Apostolos Kousaridas
Abstract:
The Third Generation Partnership Project (3GPP) has recently published its Release 16 that includes the first Vehicle to-Everything (V2X) standard based on the 5G New Radio (NR) air interface. 5G NR V2X introduces advanced functionalities on top of the 5G NR air interface to support connected and automated driving use cases with stringent requirements. This paper presents an in-depth tutorial of t…
▽ More
The Third Generation Partnership Project (3GPP) has recently published its Release 16 that includes the first Vehicle to-Everything (V2X) standard based on the 5G New Radio (NR) air interface. 5G NR V2X introduces advanced functionalities on top of the 5G NR air interface to support connected and automated driving use cases with stringent requirements. This paper presents an in-depth tutorial of the 3GPP Release 16 5G NR V2X standard for V2X communications, with a particular focus on the sidelink, since it is the most significant part of 5G NR V2X. The main part of the paper is an in-depth treatment of the key aspects of 5G NR V2X: the physical layer, the resource allocation, the quality of service management, the enhancements introduced to the Uu interface and the mobility management for V2N (Vehicle to Network) communications, as well as the co-existence mechanisms between 5G NR V2X and LTE V2X. We also review the use cases, the system architecture, and describe the evaluation methodology and simulation assumptions for 5G NR V2X. Finally, we provide an outlook on possible 5G NR V2X enhancements, including those identified within Release 17.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Next Generation Opportunistic Networking in Beyond 5G Networks
Authors:
Baldomero Coll-Perales,
Loreto Pescosolido,
Javier Gozalvez,
Andrea Passarella,
Marco Conti
Abstract:
Beyond 5G networks are expected to support massive traffic through decentralized solutions and advanced networking mechanisms. This paper aims at contributing towards this vision through the integration of device-centric wireless networks, including Device-to-Device (D2D) communications, and the Next Generation of Opportunistic networking (NGO). This integration offers multiple communication modes…
▽ More
Beyond 5G networks are expected to support massive traffic through decentralized solutions and advanced networking mechanisms. This paper aims at contributing towards this vision through the integration of device-centric wireless networks, including Device-to-Device (D2D) communications, and the Next Generation of Opportunistic networking (NGO). This integration offers multiple communication modes such as opportunistic cellular and opportunistic D2D-aided communications. Previous studies have demonstrated the potential and benefits of this integration in terms of energy efficiency, spectral efficiency and traffic offloading. We propose an integration of device-centric wireless networks and NGO that is not driven by a precise knowledge of the presence of the links. The proposed technique utilizes a novel concept of graph to model the evolution of the networking conditions and network connectivity. Uncertainties and future conditions are included in the proposed graph model through anticipatory mobile networking to estimate the transmission energy cost of the different communication modes. Based on these estimates, the devices schedule their transmissions using the most efficient communication mode. These decisions are later revisited in real-time using more precise knowledge about the network state. The conducted evaluation shows that the proposed technique significantly reduces the energy consumption (from 60% to 90% depending on the scenario) compared to traditional single-hop cellular communications and performs closely to an ideal oracle based system with full knowledge of present and future events. The transmission and computational overheads of the proposed technique show small impact on such energy gains.
△ Less
Submitted 23 December, 2020; v1 submitted 16 December, 2020;
originally announced December 2020.
-
Context-based Broadcast Acknowledgement for Enhanced Reliability of Cooperative V2X Messages
Authors:
Baldomero Coll-Perales,
Gokulnath Thandavarayan,
Miguel Sepulcre,
Javier Gozalvez
Abstract:
Most V2X applications/services are supported by the continuous exchange of broadcast messages. One of the main challenges is to increase the reliability of broadcast transmissions that lack of mechanisms to assure the correct delivery of the messages. To address this issue, one option is the use of acknowledgments. However, this option has scalability issues when applied to broadcast transmissions…
▽ More
Most V2X applications/services are supported by the continuous exchange of broadcast messages. One of the main challenges is to increase the reliability of broadcast transmissions that lack of mechanisms to assure the correct delivery of the messages. To address this issue, one option is the use of acknowledgments. However, this option has scalability issues when applied to broadcast transmissions because multiple vehicles can transmit acknowledgments simultaneously. To control scalability while addressing reliability of broadcast messages, this paper proposes and evaluates a context-based broadcast acknowledgement mechanism where the transmitting vehicles selectively request the acknowledgment of specific/critical broadcast messages, and performs retransmissions if they are not correctly received. In addition, the V2X applications/services identify the situations/conditions that trigger the execution of the broadcast acknowledgment mechanism, and the receiver(s) that should acknowledge the broadcast messages. The paper evaluates the performance of the context-based broadcast acknowledgment mechanism for a Collective Perception Service. The obtained results show the proposed mechanism can contribute to improve the awareness of crossing pedestrians at intersections by increasing the reliability in the exchange of CPM messages between vehicles approaching the intersection. This solution is being discussed under IEEE 802.11bd, and thus can be relevant for the standardization process.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Empirical Models for the Realistic Generation of Cooperative Awareness Messages in Vehicular Networks
Authors:
Rafael Molina-Masegosa,
Miguel Sepulcre,
Javier Gozalvez,
Friedbert Berens,
Vincent Martinez
Abstract:
Most V2X (Vehicle-to-Everything) applications rely on broadcasting awareness messages known as CAM (Cooperative Awareness Messages) in ETSI or BSM (Basic Safety Message) in SAE standards. A large number of studies have been devoted to guarantee their reliable transmission. However, to date, the studies are generally based on simplified data traffic models that generate awareness messages at period…
▽ More
Most V2X (Vehicle-to-Everything) applications rely on broadcasting awareness messages known as CAM (Cooperative Awareness Messages) in ETSI or BSM (Basic Safety Message) in SAE standards. A large number of studies have been devoted to guarantee their reliable transmission. However, to date, the studies are generally based on simplified data traffic models that generate awareness messages at periodic intervals or with a constant message size. These models do not accurately represent the real generation of CAM messages that follow specific mobility-based rules. Using simplified and unrealistic traffic models can significantly impact the results and validity of the studies, and hence accurate models for the generation of awareness messages are necessary. This paper proposes the first set of models that can realistically generate CAM messages. The models have been created from real traces collected by two car manufacturers in urban, sub-urban and highway test drives. The models are based on mth order Markov sources, and model the size of CAMs and the time interval between CAMs. The models are openly provided to the community and can be easily integrated into any simulator.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Generation of Cooperative Perception Messages for Connected and Automated Vehicles
Authors:
Gokulnath Thandavarayan,
Miguel Sepulcre,
Javier Gozalvez
Abstract:
Connected and Automated Vehicles (CAVs) utilize a variety of onboard sensors to sense their surrounding environment. CAVs can improve their perception capabilities if vehicles exchange information about what they sense using V2X communications. This is known as cooperative or collective perception (or sensing). A frequent transmission of collective perception messages could improve the perception…
▽ More
Connected and Automated Vehicles (CAVs) utilize a variety of onboard sensors to sense their surrounding environment. CAVs can improve their perception capabilities if vehicles exchange information about what they sense using V2X communications. This is known as cooperative or collective perception (or sensing). A frequent transmission of collective perception messages could improve the perception capabilities of CAVs. However, this improvement can be compromised if vehicles generate too many messages and saturate the communications channel. An important aspect is then when vehicles should generate the perception messages. ETSI has proposed the first set of message generation rules for collective perception. These rules define when vehicles should generate collective perception messages and what should be their content. We show that the current rules generate a high number of collective perception messages with information about a small number of detected objects. This results in an inefficient use of the communication channel that reduces the effectiveness of collective perception. We address this challenge and propose an improved algorithm that modifies the generation of collective perception messages. We demonstrate that the proposed solution improves the reliability of V2X communication and the perception of CAVs.
△ Less
Submitted 10 November, 2020; v1 submitted 29 August, 2019;
originally announced August 2019.
-
Geo-Based Scheduling for C-V2X Networks
Authors:
Rafael Molina-Masegosa,
Miguel Sepulcre,
Javier Gozalvez
Abstract:
Cellular Vehicle-to-Everything (C-V2X) networks can operate without cellular infrastructure support. Vehicles can autonomously select their radio resources using the sensing-based Semi-Persistent Scheduling (SPS) algorithm specified by the Third Generation Partnership Project (3GPP). The sensing nature of the SPS scheme makes C-V2X communications prone to the well-known hidden-terminal problem. To…
▽ More
Cellular Vehicle-to-Everything (C-V2X) networks can operate without cellular infrastructure support. Vehicles can autonomously select their radio resources using the sensing-based Semi-Persistent Scheduling (SPS) algorithm specified by the Third Generation Partnership Project (3GPP). The sensing nature of the SPS scheme makes C-V2X communications prone to the well-known hidden-terminal problem. To address this problem, this paper proposes a novel geo-based scheduling scheme that allows vehicles to autonomously select their radio resources based on the location and ordering of neighboring vehicles on the road. The proposed scheme results in an implicit resource selection coordination between vehicles (even with those outside the sensing range) that reduces packet collisions. This paper evaluates analytically and through simulations the proposed scheduling scheme. The obtained results demonstrate that it reduces packet collisions and significantly increases the C-V2X performance compared to when using the sensing-based SPS scheme.
△ Less
Submitted 25 June, 2019;
originally announced June 2019.
-
Power and Packet Rate Control for Vehicular Networks in Multi-Application Scenarios
Authors:
Miguel Sepulcre,
Javier Gozalvez,
M. Carmen Lucas-Estañ
Abstract:
Vehicular networks require vehicles to periodically transmit 1-hop broadcast packets in order to detect other vehicles in their local neighborhood. Many vehicular applications depend on the correct reception of these packets that are transmitted on a common control channel. Vehicles will actually be required to simultaneously execute multiple applications. The transmission of the broadcast packets…
▽ More
Vehicular networks require vehicles to periodically transmit 1-hop broadcast packets in order to detect other vehicles in their local neighborhood. Many vehicular applications depend on the correct reception of these packets that are transmitted on a common control channel. Vehicles will actually be required to simultaneously execute multiple applications. The transmission of the broadcast packets should hence be configured to satisfy the requirements of all applications while controlling the channel load. This can be challenging when vehicles simultaneously run multiple applications, and each application has different requirements that vary with the vehicular context (e.g. speed and density). In this context, this paper proposes and evaluates different techniques to dynamically adapt the rate and power of 1-hop broadcast packets per vehicle in multi-application scenarios. The proposed techniques are designed to satisfy the requirements of multiple simultaneous applications and reduce the channel load. The evaluation shows that the proposed techniques significantly decrease the channel load, and can better satisfy the requirements of multiple applications compared to existing approaches, in particular the Message Handler specified in the SAE J2735 DSRC Message Set Dictionary.
△ Less
Submitted 4 October, 2019; v1 submitted 17 June, 2019;
originally announced June 2019.
-
Heterogeneous V2V Communications in Multi-Link and Multi-RAT Vehicular Networks
Authors:
Miguel Sepulcre,
Javier Gozalvez
Abstract:
Connected and automated vehicles will enable advanced traffic safety and efficiency applications thanks to the dynamic exchange of information between vehicles, and between vehicles and infrastructure nodes. Connected vehicles can utilize IEEE 802.11p for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications. However, a widespread deployment of connected vehicles and the intr…
▽ More
Connected and automated vehicles will enable advanced traffic safety and efficiency applications thanks to the dynamic exchange of information between vehicles, and between vehicles and infrastructure nodes. Connected vehicles can utilize IEEE 802.11p for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications. However, a widespread deployment of connected vehicles and the introduction of connected automated driving applications will notably increase the bandwidth and scalability requirements of vehicular networks. This paper proposes to address these challenges through the adoption of heterogeneous V2V communications in multi-link and multi-RAT vehicular networks. In particular, the paper proposes the first distributed (and decentralized) context-aware heterogeneous V2V communications algorithm that is technology and application agnostic, and that allows each vehicle to autonomously and dynamically select its communications technology taking into account its application requirements and the communication context conditions. This study demonstrates the potential of heterogeneous V2V communications, and the capability of the proposed algorithm to satisfy the vehicles' application requirements while approaching the estimated upper bound network capacity.
△ Less
Submitted 9 September, 2019; v1 submitted 6 December, 2018;
originally announced December 2018.
-
Sub-6GHz Assisted MAC for Millimeter Wave Vehicular Communications
Authors:
Baldomero Coll-Perales,
Javier Gozalvez,
Marco Gruteser
Abstract:
Sub-6GHz vehicular communications (using DSRC, ITS-G5 or C-V2X) have been developed to support active safety applications. Future connected and automated driving applications can require larger bandwidth and higher data rates than currently supported by sub-6GHz V2X technologies. This has triggered the interest in developing mmWave vehicular communications. However, solutions are necessary to solv…
▽ More
Sub-6GHz vehicular communications (using DSRC, ITS-G5 or C-V2X) have been developed to support active safety applications. Future connected and automated driving applications can require larger bandwidth and higher data rates than currently supported by sub-6GHz V2X technologies. This has triggered the interest in developing mmWave vehicular communications. However, solutions are necessary to solve the challenges resulting from the use of high-frequency bands and the high mobility of vehicles. This paper contributes to this active research area by proposing a sub-6GHz assisted mmWave MAC that decouples the mmWave data and control planes. The proposal offloads mmWave MAC control functions (beam alignment, neighbor identification and scheduling) to a sub-6GHz V2X technology, and reserves the mmWave channel for the data plane. This approach improves the operation of the MAC as the control functions benefit from the longer range, and the broadcast and omnidirectional transmissions of sub-6GHz V2X technologies. This simulation study demonstrates that the proposed sub-6GHz assisted mmWave MAC reduces the control overhead and delay, and increases the spatial sharing compared to a mmWave-only configuration (IEEE 802.11ad tailored to vehicular networks). The proposed MAC is here evaluated for V2V communications using 802.11p for the control plane and 802.11ad for the data plane. However, the proposal is not restricted to these technologies, and can be adapted to other technologies such as C-V2X and 5G NR.
△ Less
Submitted 13 May, 2019; v1 submitted 7 September, 2018;
originally announced September 2018.
-
Analytical Models of the Performance of C-V2X Mode 4 Vehicular Communications
Authors:
Manuel Gonzalez-Martin,
Miguel Sepulcre,
Rafael Molina-Masegosa,
Javier Gozalvez
Abstract:
The C-V2X or LTE-V standard has been designed to support V2X (Vehicle to Everything) communications. The standard is an evolution of LTE, and it has been published by the 3GPP in Release 14. This new standard introduces the C-V2X or LTE-V Mode 4 that is specifically designed for V2V communications using the PC5 sidelink interface without any cellular infrastructure support. In Mode 4, vehicles aut…
▽ More
The C-V2X or LTE-V standard has been designed to support V2X (Vehicle to Everything) communications. The standard is an evolution of LTE, and it has been published by the 3GPP in Release 14. This new standard introduces the C-V2X or LTE-V Mode 4 that is specifically designed for V2V communications using the PC5 sidelink interface without any cellular infrastructure support. In Mode 4, vehicles autonomously select and manage their radio resources. Mode 4 is highly relevant since V2V safety applications cannot depend on the availability of infrastructure-based cellular coverage. This paper presents the first analytical models of the communication performance of C-V2X or LTE-V Mode 4. In particular, the paper presents analytical models for the average PDR (Packet Delivery Ratio) as a function of the distance between transmitter and receiver, and for the four different types of transmission errors that can be encountered in C-V2X Mode 4. The models are validated for a wide range of transmission parameters and traffic densities. To this aim, this study compares the results obtained with the analytical models to those obtained with a C-V2X Mode 4 simulator implemented over Veins.
△ Less
Submitted 21 December, 2018; v1 submitted 17 July, 2018;
originally announced July 2018.
-
Evaluation of IEEE 802.11ad for mmWave V2V Communications
Authors:
Baldomero Coll-Perales,
Marco Gruteser,
Javier Gozalvez
Abstract:
Autonomous vehicles can construct a more accurate perception of their surrounding environment by exchanging rich sensor data with nearby vehicles. Such exchange can require larger bandwidths than currently provided by ITS-G5/DSRC and Cellular V2X. Millimeter wave (mmWave) communications can provide higher bandwidth and could complement current V2X standards. Recent studies have started investigati…
▽ More
Autonomous vehicles can construct a more accurate perception of their surrounding environment by exchanging rich sensor data with nearby vehicles. Such exchange can require larger bandwidths than currently provided by ITS-G5/DSRC and Cellular V2X. Millimeter wave (mmWave) communications can provide higher bandwidth and could complement current V2X standards. Recent studies have started investigating the potential of IEEE 802.11ad to support high bandwidth vehicular communications. This paper introduces the first performance evaluation of the IEEE 802.11ad MAC (Medium Access Control) and beamforming mechanism for mmWave V2V communications. The study highlights existing opportunities and shortcomings that should guide the development of mmWave communications for V2V communications.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
5G and Beyond: Smart Devices as part of the Network Fabric
Authors:
Baldomero Coll-Perales,
Javier Gozalvez,
Juan Luis Maestre
Abstract:
5G networks mainly rely on infrastructure-centric cellular solutions to address data traffic and service demands. Continuously scaling infrastructure-centric cellular networks is not exempt of challenges, and beyond 5G networks should consider the active coexistence and coordination of infrastructure-centric and device-centric wireless networks. Device-centric wireless networks will build from D2D…
▽ More
5G networks mainly rely on infrastructure-centric cellular solutions to address data traffic and service demands. Continuously scaling infrastructure-centric cellular networks is not exempt of challenges, and beyond 5G networks should consider the active coexistence and coordination of infrastructure-centric and device-centric wireless networks. Device-centric wireless networks will build from D2D and MCNs. Device-centric wireless networks can push the limits of edge computing and networking to smart devices (including smartphones, vehicles, machines and robots), and exploit their mobile computing, storage and connectivity capabilities. These capabilities can be more efficiently utilized using demand-driven opportunistic networking that establishes the connections between devices and nodes based on their capacity to support the requested demand and services. This paper presents results from experimental field tests that demonstrate the cellular spectral efficiency gains that can be achieved from the combined use of device-centric wireless communications and demand-driven opportunistic networking. The field trials demonstrate that these technologies can improve the cellular spectral efficiency of conventional cellular communications by up to a factor of 4.7 and 12 in outdoor pedestrian and vehicular scenarios, respectively. These gains have been obtained using 4G and IEEE 802.11 technologies. However, the potential of device-centric wireless networks is not constrained to any particular radio interface. The results presented in this paper provide empirical evidences that further motivate progressing towards a new paradigm where edge networking capabilities are moved to smart mobile devices that become part of the network fabric, and can opportunistically and locally integrate network management functions to ensure that sufficient resources are placed where the demand arises.
△ Less
Submitted 8 December, 2018; v1 submitted 2 April, 2018;
originally announced April 2018.
-
Experimental Evaluation of Multihop Cellular Networks using Mobile Relays
Authors:
J. Gozalvez,
B. Coll-Perales
Abstract:
Future wireless networks are expected to provide high bandwidth multimedia services in extended areas with homogeneous Quality of Service (QoS) levels. Conventional cellular architectures might not be able to satisfy these requirements due to the effect of surrounding obstacles and the signal attenuation with distance, in particular under Non Line of Sight (NLOS) propagation conditions. Recent stu…
▽ More
Future wireless networks are expected to provide high bandwidth multimedia services in extended areas with homogeneous Quality of Service (QoS) levels. Conventional cellular architectures might not be able to satisfy these requirements due to the effect of surrounding obstacles and the signal attenuation with distance, in particular under Non Line of Sight (NLOS) propagation conditions. Recent studies have investigated the potential of Multi-hop Cellular Networks (MCNs) to overcome the traditional cellular architecture limitations through the integration of cellular and ad-hoc networking technologies. However, these studies are generally analytical or simulation-based. On the other hand, this paper reports the first experimental field tests that validate and quantify the benefits that MCNs using mobile relays can provide over traditional cellular systems.
△ Less
Submitted 30 January, 2016;
originally announced February 2016.
