-
Collective modes in the charge-density wave state of K$_{0.3}$MoO$_3$: The role of long-range Coulomb interactions revisited
Authors:
Max O. Hansen,
Yash Palan,
Viktor Hahn,
Mark D. Thomson,
Konstantin Warawa,
Hartmut G. Roskos,
Jure Demsar,
Falko Pientka,
Oleksandr Tsyplyatyev,
Peter Kopietz
Abstract:
We re-examine the effect of long-range Coulomb interactions on the collective amplitude and phase modes in the incommensurate charge-density-wave ground state of quasi-one-dimensional conductors. Using an effective action approach we show that the longitudinal acoustic phonon protects the gapless linear dispersion of the lowest phase mode in the presence of long-range Coulomb interactions. Moreove…
▽ More
We re-examine the effect of long-range Coulomb interactions on the collective amplitude and phase modes in the incommensurate charge-density-wave ground state of quasi-one-dimensional conductors. Using an effective action approach we show that the longitudinal acoustic phonon protects the gapless linear dispersion of the lowest phase mode in the presence of long-range Coulomb interactions. Moreover, in Gaussian approximation, amplitude fluctuations are not affected by long-range Coulomb interactions. We also calculate the collective mode dispersions at finite temperatures and compare our results with the measured energies of amplitude and phase modes in K$_{0.3}$MoO$_3$. With the exception of the lowest phase mode, the temperature dependence of the measured mode energies can be quantitatively described within a multi-phonon Fröhlich model for generic electron-phonon interactions neglecting long-range Coulomb interactions.
△ Less
Submitted 14 August, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Validation of a model for estimating the strength of the vortex created by a Vortex Generator from its Bound Circulation
Authors:
Martin O. L. Hansen,
Antonios Charalampous,
Jean-Marc Foucaut,
Christophe Cuvier,
Clara M. Velte
Abstract:
A hypothesis is tested and validated for predicting the vortex strength induced by a vortex generator in wall-bounded flow by combining the knowledge of the Vortex Generator (VG) geometry and the approaching boundary layer velocity distribution. In this paper, the spanwise distribution of bound circulation on the vortex generator is computed from integrating the pressure force along the VG height…
▽ More
A hypothesis is tested and validated for predicting the vortex strength induced by a vortex generator in wall-bounded flow by combining the knowledge of the Vortex Generator (VG) geometry and the approaching boundary layer velocity distribution. In this paper, the spanwise distribution of bound circulation on the vortex generator is computed from integrating the pressure force along the VG height calculated using CFD. It is then assumed that all this bound circulation is shed into the wake to fulfill Helmholtz's theorem and then curl up into one primary tip vortex. To validate this, the trailed circulation estimated from the distribution of the bound circulation is compared to the one in the wake behind the vortex generator determined directly from the wake velocities at some downstream distance. In practical situations, the pressure distribution on the vane is unknown and consequently other estimates of the spanwise force distribution on the VG must instead be applied, such as using 2D airfoil data corresponding to the VG geometry at each wall-normal distance. Such models have previously been proposed and used as an engineering tool to aid preliminary VG design and it is not the purpose of this paper to refine such engineering models, but to validate their assumptions such as applying a lifting line model on a VG that has a very low aspect ratio and placed in wall boundary layer. Herein, high Reynolds number boundary layer measurements of VG induced flow were used to validate the Reynolds Averaged Navier-Stokes (RANS) modeled circulation results and are used for further illustration and validation of the hypothesis.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Multiple vortex structures in the wake of a rectangular winglet in ground effect
Authors:
Clara M. Velte,
Martin O. L. Hansen,
Valery L. Okulov
Abstract:
Patterns of vorticity in the wake of a single rectangular winglet (vortex generator) embedded in a turbulent boundary layer have been studied using Stereoscopic Particle Image Velocimetry (SPIV). The winglet was mounted normally to a flat surface with an angle to the oncoming flow. A parametric study varying the winglet height (constant aspect ratio) and angle has shown, contrary to the common cla…
▽ More
Patterns of vorticity in the wake of a single rectangular winglet (vortex generator) embedded in a turbulent boundary layer have been studied using Stereoscopic Particle Image Velocimetry (SPIV). The winglet was mounted normally to a flat surface with an angle to the oncoming flow. A parametric study varying the winglet height (constant aspect ratio) and angle has shown, contrary to the common classical single tip-vortex conception, that the wake generally consists of a complex system of multiple vortex structures. The primary vortex has previously been discovered to contain a direct coupling between the axial and the rotational flow. In the current work, even the longitudinal secondary structures detected from measured streamwise vorticity display similar behavior. A regime map depicting the observed stable far wake states of the multiple vortices as a function of winglet height and angle reveals complex patterns of the flow topologies not only with the primary tip vortex, but with the additional secondary structures as well. A bifurcation diagram shows distinct regimes of the various secondary structures as well as how the primary vortex is in some cases significantly affected by their presence. These data should serve as inspiration in the process of generating longitudinal vortices for enhancement of heat and mass transfer in industrial devices since the multiple vortex regimes can help improve the conditions for these exchanges. Further, these results point to a weakness in existing inviscid models not accounting for the possibility of multiple vortical structures in the wake.
△ Less
Submitted 14 June, 2019;
originally announced June 2019.
-
Alteration of helical vortex core without change in flow topology
Authors:
Clara M. Velte,
Valery L. Okulov,
Martin O. L. Hansen
Abstract:
The abrupt expansion of the slender vortex core with changes in flow topology is commonly known as vortex breakdown. We present new experimental observations of an alteration of the helical vortex core in wall bounded turbulent flow with abrupt growth in core size, but without change in flow topology. The helical symmetry as such is preserved, though the characteristic parameters of helical symmet…
▽ More
The abrupt expansion of the slender vortex core with changes in flow topology is commonly known as vortex breakdown. We present new experimental observations of an alteration of the helical vortex core in wall bounded turbulent flow with abrupt growth in core size, but without change in flow topology. The helical symmetry as such is preserved, though the characteristic parameters of helical symmetry of the vortex core transfer from a smooth linear variation to a different trend under the influence of a non-uniform pressure gradient, causing an increase in helical pitch without changing its sign.
△ Less
Submitted 14 June, 2019;
originally announced June 2019.
-
Helical structure of longitudinal vortices embedded in turbulent wall-bounded flow
Authors:
Clara M. Velte,
Martin O. L. Hansen,
Valery L. Okulov
Abstract:
Embedded vortices in turbulent wall-bounded flow over a flat plate, generated by a passive rectangular vane-type vortex generator with variable angle $β$ to the incoming flow in a low-Reynolds number flow ($Re=2600$ based on the inlet grid mesh size $L=0.039\;$m and free stream velocity $U_{\infty} = 1.0\;$m s$^{-1}$) have been studied with respect to helical symmetry. The studies were carried out…
▽ More
Embedded vortices in turbulent wall-bounded flow over a flat plate, generated by a passive rectangular vane-type vortex generator with variable angle $β$ to the incoming flow in a low-Reynolds number flow ($Re=2600$ based on the inlet grid mesh size $L=0.039\;$m and free stream velocity $U_{\infty} = 1.0\;$m s$^{-1}$) have been studied with respect to helical symmetry. The studies were carried out in a low-speed closed-circuit wind tunnel utilizing Stereoscopic Particle Image Velocimetry (SPIV). The vortices have been shown to possess helical symmetry, allowing the flow to be described in a simple fashion. Iso-contour maps of axial vorticity revealed a dominant primary vortex and a weaker secondary one for $20^{\circ} \leq β\leq 40^{\circ}$. For angles outside of this range, the helical symmetry was impaired due to the emergence of additional flow effects. A model describing the flow has been utilized, showing strong concurrence with the measurements, even though the model is decoupled from external flow processes that could perturb the helical symmetry. The pitch, vortex core size, circulation and the advection velocity of the vortex all vary linearly with the device angle $β$. This is important for flow control, since one thereby can determine the axial velocity induced by the helical vortex as well as the swirl redistributing the axial velocity component for a given device angle $β$. This also simplifies theoretical studies, \eg to understand and predict the stability of the vortex and to model the flow numerically.
△ Less
Submitted 14 June, 2019;
originally announced June 2019.