-
Purrfect Pitch: Exploring Musical Interval Learning through Multisensory Interfaces
Authors:
Sam Chin,
Cathy Mengying Fang,
Nikhil Singh,
Ibrahim Ibrahim,
Joe Paradiso,
Pattie Maes
Abstract:
We introduce Purrfect Pitch, a system consisting of a wearable haptic device and a custom-designed learning interface for musical ear training. We focus on the ability to identify musical intervals (sequences of two musical notes), which is a perceptually ambiguous task that usually requires strenuous rote training. With our system, the user would hear a sequence of two tones while simultaneously…
▽ More
We introduce Purrfect Pitch, a system consisting of a wearable haptic device and a custom-designed learning interface for musical ear training. We focus on the ability to identify musical intervals (sequences of two musical notes), which is a perceptually ambiguous task that usually requires strenuous rote training. With our system, the user would hear a sequence of two tones while simultaneously receiving two corresponding vibrotactile stimuli on the back. Providing haptic feedback along the back makes the auditory distance between the two tones more salient, and the back-worn design is comfortable and unobtrusive. During training, the user receives multi-sensory feedback from our system and inputs their guessed interval value on our web-based learning interface. They see a green (otherwise red) screen for a correct guess with the correct interval value. Our study with 18 participants shows that our system enables novice learners to identify intervals more accurately and consistently than those who only received audio feedback, even after the haptic feedback is removed. We also share further insights on how to design a multisensory learning system.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
Comparative Analysis of Four Prominent Ant Colony Optimization Variants: Ant System, Rank-Based Ant System, Max-Min Ant System, and Ant Colony System
Authors:
Ahmed Mohamed Abdelmoaty,
Ibrahim Ihab Ibrahim
Abstract:
This research conducts a comparative analysis of four Ant Colony Optimization (ACO) variants -- Ant System (AS), Rank-Based Ant System (ASRank), Max-Min Ant System (MMAS), and Ant Colony System (ACS) -- for solving the Traveling Salesman Problem (TSP). Our findings demonstrate that algorithm performance is significantly influenced by problem scale and instance type. ACS excels in smaller TSP insta…
▽ More
This research conducts a comparative analysis of four Ant Colony Optimization (ACO) variants -- Ant System (AS), Rank-Based Ant System (ASRank), Max-Min Ant System (MMAS), and Ant Colony System (ACS) -- for solving the Traveling Salesman Problem (TSP). Our findings demonstrate that algorithm performance is significantly influenced by problem scale and instance type. ACS excels in smaller TSP instances due to its rapid convergence, while PACS proves more adaptable for medium-sized problems. MMAS consistently achieves competitive results across all scales, particularly for larger instances, due to its ability to avoid local optima. ASRank, however, struggles to match the performance of the other algorithms. This research provides insights into the strengths and weaknesses of these ACO variants, guiding the selection of the most suitable algorithm for specific TSP applications.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
An Efficient Solution to the 2D Visibility Problem in Cartesian Grid Maps and its Application in Heuristic Path Planning
Authors:
Ibrahim Ibrahim,
Joris Gillis,
Wilm Decré,
Jan Swevers
Abstract:
This paper introduces a novel, lightweight method to solve the visibility problem for 2D grids. The proposed method evaluates the existence of lines-of-sight from a source point to all other grid cells in a single pass with no preprocessing and independently of the number and shape of obstacles. It has a compute and memory complexity of $\mathcal{O}(n)$, where $n = n_{x}\times{} n_{y}$ is the size…
▽ More
This paper introduces a novel, lightweight method to solve the visibility problem for 2D grids. The proposed method evaluates the existence of lines-of-sight from a source point to all other grid cells in a single pass with no preprocessing and independently of the number and shape of obstacles. It has a compute and memory complexity of $\mathcal{O}(n)$, where $n = n_{x}\times{} n_{y}$ is the size of the grid, and requires at most ten arithmetic operations per grid cell. In the proposed approach, we use a linear first-order hyperbolic partial differential equation to transport the visibility quantity in all directions. In order to accomplish that, we use an entropy-satisfying upwind scheme that converges to the true visibility polygon as the step size goes to zero. This dynamic-programming approach allows the evaluation of visibility for an entire grid orders of magnitude faster than typical ray-casting algorithms. We provide a practical application of our proposed algorithm by posing the visibility quantity as a heuristic and implementing a deterministic, local-minima-free path planner, setting apart the proposed planner from traditional methods. Lastly, we provide necessary algorithms and an open-source implementation of the proposed methods.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
Metal-Optic Nanophotonic Modulators in Standard CMOS Technology
Authors:
Mohamed ElKabbash,
Sivan Trajtenberg-Mills,
Isaac Harris,
Saumil Bandyopadhyay,
Mohamed I Ibrahim,
Archer Wang,
Xibi Chen,
Cole Brabec,
Hasan Z. Yildiz,
Ruonan Han,
Dirk Englund
Abstract:
Integrating nanophotonics with electronics promises revolutionary applications, from LiDAR to holographic displays. Although silicon photonics is maturing, realizing active nanophotonics in the ubiquitous bulk CMOS processes remains challenging. We introduce a fabless approach to embed active nanophotonics in bulk CMOS by co-designing the back-end-of-line metal layers for optical functionality. Us…
▽ More
Integrating nanophotonics with electronics promises revolutionary applications, from LiDAR to holographic displays. Although silicon photonics is maturing, realizing active nanophotonics in the ubiquitous bulk CMOS processes remains challenging. We introduce a fabless approach to embed active nanophotonics in bulk CMOS by co-designing the back-end-of-line metal layers for optical functionality. Using a 65nm CMOS process, we create plasmonic liquid crystal modulators with switching speeds 100x faster than commercial technologies. This zero-change nanophotonics method could equip mass-produced chips with optical communications, sensing and imaging. Embedding nanophotonics in the dominant electronics platform democratizes nanofabrication, spawning technologies from chip-scale LiDAR to holographic light-field displays.
△ Less
Submitted 16 November, 2023; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Heterogeneous integration of spin-photon interfaces with a scalable CMOS platform
Authors:
Linsen Li,
Lorenzo De Santis,
Isaac Harris,
Kevin C. Chen,
Yihuai Gao,
Ian Christen,
Matthew Trusheim,
Hyeongrak Choi,
Yixuan Song,
Carlos Errando-Herranz,
Jiahui Du,
Yong Hu,
Genevieve Clark,
Mohamed I. Ibrahim,
Gerald Gilbert,
Ruonan Han,
Dirk Englund
Abstract:
Color centers in diamonds have emerged as a leading solid-state platform for advancing quantum technologies, satisfying the DiVincenzo criteria and recently achieving a quantum advantage in secret key distribution. Recent theoretical works estimate that general-purpose quantum computing using local quantum communication networks will require millions of physical qubits to encode thousands of logic…
▽ More
Color centers in diamonds have emerged as a leading solid-state platform for advancing quantum technologies, satisfying the DiVincenzo criteria and recently achieving a quantum advantage in secret key distribution. Recent theoretical works estimate that general-purpose quantum computing using local quantum communication networks will require millions of physical qubits to encode thousands of logical qubits, which presents a substantial challenge to the hardware architecture at this scale. To address the unanswered scaling problem, in this work, we first introduce a scalable hardware modular architecture "Quantum System-on-Chip" (QSoC) that features compact two-dimensional arrays "quantum microchiplets" (QMCs) containing tin-vacancy (SnV-) spin qubits integrated on a cryogenic application-specific integrated circuit (ASIC). We demonstrate crucial architectural subcomponents, including (1) QSoC fabrication via a lock-and-release method for large-scale heterogeneous integration; (2) a high-throughput calibration of the QSoC for spin qubit spectral inhomogenous registration; (3) spin qubit spectral tuning functionality for inhomogenous compensation; (4) efficient spin-state preparation and measurement for improved spin and optical properties. QSoC architecture supports full connectivity for quantum memory arrays in a set of different resonant frequencies and offers the possibility for further scaling the number of solid-state physical qubits via larger and denser QMC arrays and optical frequency multiplexing networking.
△ Less
Submitted 20 December, 2023; v1 submitted 28 August, 2023;
originally announced August 2023.
-
Parametric Investigation on Different Bone Densities to avoid Thermal Necrosis during Bone Drilling Process
Authors:
Md Ashequl Islam,
Nur Saifullah Kamarrudin,
M. F. F. Suhaimi,
Ruslizam Daud,
Ishak Ibrahim,
Fauziah Mat
Abstract:
Bone drilling is a universal surgical procedure commonly used for internal fracture fixation, implant placement, or reconstructive surgery in orthopedics and dentistry. The increased temperature during such treatment increases the risk of thermal penetration of the bone, which may delay healing or compromise the fixation's integrity. Thus, avoiding penetration during bone drilling is critical to e…
▽ More
Bone drilling is a universal surgical procedure commonly used for internal fracture fixation, implant placement, or reconstructive surgery in orthopedics and dentistry. The increased temperature during such treatment increases the risk of thermal penetration of the bone, which may delay healing or compromise the fixation's integrity. Thus, avoiding penetration during bone drilling is critical to ensuring the implant's stability, which needs surgical drills with an optimized design. Bovine femur and mandible bones are chosen as the work material since human bones are not available and are the closest animal bone to human bone in terms of properties. In the present study, the Taguchi fractional factorial approach was used to determine the best design of surgical drills by comparing the drilling properties (i.e., signal-to-noise ratio and temperature rise). The control factors (spindle speed, drill bit diameter, drill site depth, and their levels) were arranged in an L9 orthogonal array. Drilling experiments were done using nine experimental drills with three repetitions. The findings of this study indicate that the ideal values of the surgical drill's three parameters combination (S1D1Di2) and their percentage contribution depend on the parameters' drilling levels. However, the result shows that the spindle speed has the highest temperature effect among other parameters in both (femur and mandible) bones.
△ Less
Submitted 24 August, 2023;
originally announced August 2023.
-
Temperature measurement methods in an experimental setup during bone drilling: A brief review on the comparison of thermocouple and infrared thermography
Authors:
Md Ashequl Islam,
Nur Saifullah Kamarrudin,
Ruslizam Daud,
Ishak Ibrahim,
Anas Rahman,
Fauziah Mat
Abstract:
Predicting thermal response in orthopaedic surgery or dental implantation remains a significant challenge. This study aims to find a practical approach for measuring temperature elevation during a bone drilling experiment by analyzing the existing methods. Traditionally thermocouple has frequently been used to predict the bone temperature in the drilling process. However, several experimental stud…
▽ More
Predicting thermal response in orthopaedic surgery or dental implantation remains a significant challenge. This study aims to find a practical approach for measuring temperature elevation during a bone drilling experiment by analyzing the existing methods. Traditionally thermocouple has frequently been used to predict the bone temperature in the drilling process. However, several experimental studies demonstrate that the invasive method using thermocouple is impractical in medical conditions and prefers the thermal infrared (IR) camera as a non-invasive method. This work proposes a simplified experimental model that uses the thermocouple to determine temperature rise coupled with the thermal image source approach. Furthermore, our new method provides a significant opportunity to calibrate the thermal IR camera by discovering the undetected heat elevation in a workpiece depth.
△ Less
Submitted 23 August, 2023;
originally announced August 2023.
-
Anticipated BSDEs driven by fractional Brownian motion with time-delayed generator
Authors:
Pei Zhang,
Nur Anisah Mohamed,
Adriana Irawati Nur Ibrahim
Abstract:
This paper discusses a new type of anticipated backward stochastic differential equation with a time-delayed generator (DABSDEs, for short) driven by fractional Brownian motion, also known as fractional BSDEs, with Hurst parameter $H\in(1/2,1)$, which extends the results of the anticipated backward stochastic differential equation to the case of the drive is fractional Brownian motion instead of a…
▽ More
This paper discusses a new type of anticipated backward stochastic differential equation with a time-delayed generator (DABSDEs, for short) driven by fractional Brownian motion, also known as fractional BSDEs, with Hurst parameter $H\in(1/2,1)$, which extends the results of the anticipated backward stochastic differential equation to the case of the drive is fractional Brownian motion instead of a standard Brownian motion and in which the generator considers not only the present and future times but also the past time. By using the fixed point theorem, we will demonstrate the existence and uniqueness of the solutions to these equations. Moreover, we shall establish a comparison theorem for the solutions.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
Backward Stochastic Differential Equations (BSDEs) Using Infinite-dimensional Martingales with Subdifferential Operator
Authors:
Pei Zhang,
Adriana Irawati Nur Ibrahim,
Nur Anisah Mohamed
Abstract:
In this paper, we focus on a family of backward stochastic differential equations (BSDEs) with sub-differential operators that are driven by infinite-dimensional martingales which involve symmetry, that is, the process involves a positive definite nuclear operator Q. We shall show that the solution to such infinite-dimensional BSDEs exists and is unique. The existence of the solution is establishe…
▽ More
In this paper, we focus on a family of backward stochastic differential equations (BSDEs) with sub-differential operators that are driven by infinite-dimensional martingales which involve symmetry, that is, the process involves a positive definite nuclear operator Q. We shall show that the solution to such infinite-dimensional BSDEs exists and is unique. The existence of the solution is established using Yosida approximations, and the uniqueness is proved using Fixed Point Theorem. Furthermore, as an application of the main result, we shall show that the backward stochastic partial differential equation driven by infinite-dimensional martingales with a continuous linear operator has a unique solution under the condition that the function F equals to zero.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Smart Education: Higher Education Instruction and the Internet of Things (IoT)
Authors:
Idris Skloul Ibrahim,
Benjamin Kenwright
Abstract:
The Internet of Things (IoT) has many applications in our daily lives. One aspect in particular is how the IoT is making a substantial impact on education and learning; as we move into the 'Smart Educational' era. This article explores how the IoT continues to transform the education landscape, from classrooms and assessments to culture and attitudes. Smart Education is a pivotal tool in the fight…
▽ More
The Internet of Things (IoT) has many applications in our daily lives. One aspect in particular is how the IoT is making a substantial impact on education and learning; as we move into the 'Smart Educational' era. This article explores how the IoT continues to transform the education landscape, from classrooms and assessments to culture and attitudes. Smart Education is a pivotal tool in the fight to meet the educational challenges of tomorrow. The IoT tools are getting used more and more often in the area of education, aiming to increase student engagement, satisfaction and quality of learning. IoT will reshape student culture and habits beyond belief. As Smart Education is more than just using technologies, it involves a whole range of factors, from the educational management through to the pedagogical techniques and effectiveness. Educators in the 21st century now have access to gamification, smart devices, data management, and immersive technologies. Enabling academics to gather a variety of information from students. Ranging from monitoring student engagement to adapting the learning strategies for improved learning effectiveness. Through Smart Education, educators will be able to better monitor the needs of individual students and adjust their learning load correspondingly (i.e., optimal learning environment/workload to support and prevent students failing). One of the biggest challenges for educators is how new technologies will address growing problems (engagement and achievement). The scale and pace of change (technological IoT era) is unprecedented. Typically, jobs students are trained for today will not be here tomorrow. Education is not just about knowledge acquisition, but also the digital skills, adaptability and creativity (essential, if students are to thrive in the new world).
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Whole-Body MPC and Dynamic Occlusion Avoidance: A Maximum Likelihood Visibility Approach
Authors:
Ibrahim Ibrahim,
Farbod Farshidian,
Jan Preisig,
Perry Franklin,
Paolo Rocco,
Marco Hutter
Abstract:
This paper introduces a novel approach for whole-body motion planning and dynamic occlusion avoidance. The proposed approach reformulates the visibility constraint as a likelihood maximization of visibility probability. In this formulation, we augment the primary cost function of a whole-body model predictive control scheme through a relaxed log barrier function yielding a relaxed log-likelihood m…
▽ More
This paper introduces a novel approach for whole-body motion planning and dynamic occlusion avoidance. The proposed approach reformulates the visibility constraint as a likelihood maximization of visibility probability. In this formulation, we augment the primary cost function of a whole-body model predictive control scheme through a relaxed log barrier function yielding a relaxed log-likelihood maximization formulation of visibility probability. The visibility probability is computed through a probabilistic shadow field that quantifies point light source occlusions. We provide the necessary algorithms to obtain such a field for both 2D and 3D cases. We demonstrate 2D implementations of this field in simulation and 3D implementations through real-time hardware experiments. We show that due to the linear complexity of our shadow field algorithm to the map size, we can achieve high update rates, which facilitates onboard execution on mobile platforms with limited computational power. Lastly, we evaluate the performance of the proposed MPC reformulation in simulation for a quadrupedal mobile manipulator.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
An improved model for describing the net carrier recombination rate in semiconductor devices
Authors:
M. L. Inche Ibrahim,
Anvar A. Zakhidov
Abstract:
Carrier recombination is a process that significantly influences the performance of semiconductor devices such as solar cells, photodiodes, and light-emitting diodes (LEDs). Therefore, a model that can accurately describe and quantify the net carrier recombination rate in semiconductor devices is important in order to further improve the performance of relevant semiconductor devices. The conventio…
▽ More
Carrier recombination is a process that significantly influences the performance of semiconductor devices such as solar cells, photodiodes, and light-emitting diodes (LEDs). Therefore, a model that can accurately describe and quantify the net carrier recombination rate in semiconductor devices is important in order to further improve the performance of relevant semiconductor devices. The conventional model for describing the net carrier recombination rate is derived based on the condition that there is no electric current in the considered semiconductor, which is true only when the semiconductor is not part of a semiconductor device, and hence is not connected to an external circuit. The conventional model is adopted and used for describing the net carrier recombination rate in semiconductors that are part of devices (i.e. in semiconductor devices). In this paper, we derive and propose a new model for describing the net carrier recombination rate in semiconductor devices. The newly proposed model is an improvement to the currently used model by considering the fact that electric current can flow in the semiconducting materials of semiconductor devices. We validate the proposed recombination model and show that the use of the proposed model can be crucial for modeling and analyzing the performance of optoelectronic devices such as solar cells and LEDs.
△ Less
Submitted 30 August, 2021; v1 submitted 23 August, 2021;
originally announced August 2021.
-
Resource allocation for D2D-Based AMI Communications Underlaying LTE Cellular Networks
Authors:
H. H. Esmat,
Mahmoud M. Elmesalawy,
I. I. Ibrahim
Abstract:
Smart meters are utilized to transmit the consumption information to the metering data management system for observing and management in smart grid advanced metering infrastructure systems. In the meantime, for efficient utilization for spectrum, Device-to-Device (D2D) communications underlaying LTE networks are a promising wireless communication technology for advanced metering infrastructure whi…
▽ More
Smart meters are utilized to transmit the consumption information to the metering data management system for observing and management in smart grid advanced metering infrastructure systems. In the meantime, for efficient utilization for spectrum, Device-to-Device (D2D) communications underlaying LTE networks are a promising wireless communication technology for advanced metering infrastructure which supporting a technique for reusing the same radio resources (RRs) of LTE networks. Therefore, we examine the utilization of D2D communication technology for advanced metering infrastructure communications underlaying LTE networks. A novel approach is suggested for provisioning the mandatory communication between serving data concentrator and its set of smart meters using this technology. The suggested approach is dependent on two main stages. The group of permissible cellular user equipment reuse candidates for every smart meter is calculated with taking the quality of service demands for cellular user devices and smart meters into consideration in the first stage. The optimal RR allocation for every smart meter is determined based on maximizing the access rate of smart meters which can be accepted and operated in D2D reuse mode in the second stage. Simulation results prove the efficacy of the suggested approach for efficient advanced metering infrastructure communication underlaying LTE systems with accepting remarkable number of SMs and accomplishing outstanding throughput gain.
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
The smooth-wall-like behaviour of turbulence over drag-altering surfaces: a unifying virtual-origin framework
Authors:
Joseph I. Ibrahim,
Garazi Gómez-de-Segura,
Daniel Chung,
Ricardo García-Mayoral
Abstract:
We conduct direct simulations of turbulent channels imposing different virtual origins for all three velocities using Robin, slip-like boundary conditions to study the effect of displacing the origins perceived by different flow components, a mechanism common to small-textured surfaces. We also explore this effect using opposition control. For riblets, Luchini et al. (1991) proposed that their eff…
▽ More
We conduct direct simulations of turbulent channels imposing different virtual origins for all three velocities using Robin, slip-like boundary conditions to study the effect of displacing the origins perceived by different flow components, a mechanism common to small-textured surfaces. We also explore this effect using opposition control. For riblets, Luchini et al. (1991) proposed that their effect could be reduced to the offset between the streamwise- and spanwise-velocity origins, the latter being the origin perceived by turbulence. Later results on superhydrophobic surfaces suggest that the apparent wall-normal-velocity origin could also play a role. Our results support that the relevant parameter is the offset between the origins perceived by the mean flow and by turbulence. The former is determined by the streamwise slip length, but the latter depends on both the wall-normal and spanwise slip lengths. The slip on the streamwise velocity fluctuations, in turn, has a negligible effect on the virtual origin for turbulence, at least in the drag-reduction regime. This suggests that the origin perceived by the quasi-streamwise vortices, which induce the cross velocities at the surface, is key in determining the virtual origin for turbulence, while that perceived by the near-wall streaks, which are associated with the streamwise velocity fluctuations, plays a secondary role. In this framework, the changes in turbulent quantities typically reported in the flow-control literature are shown to be only a result of the choice of origin and are absent when referenced to the origin experienced by turbulence. Other than this shift in origin, we show that turbulence remains essentially smooth-wall-like, and a simple expression can predict the virtual origin for turbulence. The effect on drag can be reproduced a priori by introducing the virtual origins into a smooth-wall eddy-viscosity framework.
△ Less
Submitted 2 November, 2020; v1 submitted 29 June, 2020;
originally announced June 2020.
-
High-Scalability CMOS Quantum Magnetometer with Spin-State Excitation and Detection of Diamond Color Centers
Authors:
Mohamed I. Ibrahim,
Christopher Foy,
Dirk R. Englund,
Ruonan Han
Abstract:
Magnetometers based on quantum mechanical processes enable high sensitivity and long-term stability without the need for re-calibration, but their integration into fieldable devices remains challenging. This paper presents a CMOS quantum vector-field magnetometer that miniaturizes the conventional quantum sensing platforms using nitrogen-vacancy (NV) centers in diamond. By integrating key componen…
▽ More
Magnetometers based on quantum mechanical processes enable high sensitivity and long-term stability without the need for re-calibration, but their integration into fieldable devices remains challenging. This paper presents a CMOS quantum vector-field magnetometer that miniaturizes the conventional quantum sensing platforms using nitrogen-vacancy (NV) centers in diamond. By integrating key components for spin control and readout, the chip performs magnetometry through optically detected magnetic resonance (ODMR) through a diamond slab attached to a custom CMOS chip. The ODMR control is highly uniform across the NV centers in the diamond, which is enabled by a CMOS-generated $\sim$2.87 GHz magnetic field with <5% inhomogeneity across a large-area current-driven wire array. The magnetometer chip is 1.5 mm$^2$ in size, prototyped in 65-nm bulk CMOS technology, and attached to a 300$\times$80 $μ$m2 diamond slab. NV fluorescence is measured by CMOS-integrated photodetectors. This on-chip measurement is enabled by efficient rejection of the green pump light from the red fluorescence through a CMOS-integrated spectral filter based on a combination of spectrally dependent plasmonic losses and diffractive filtering in the CMOS back-end-of-line (BEOL). This filter achieves $\sim$25 dB of green light rejection. We measure a sensitivity of 245 nT/Hz$^{1/2}$, marking a 130$\times$ improvement over a previous CMOS-NV sensor prototype, largely thanks to the better spectral filtering and homogeneous microwave generation over larger area.
△ Less
Submitted 22 July, 2020; v1 submitted 12 May, 2020;
originally announced May 2020.
-
CMOS-Integrated Diamond Nitrogen-Vacancy Quantum Sensor
Authors:
Donggyu Kim,
Mohamed I. Ibrahim,
Christopher Foy,
Matthew E. Trusheim,
Ruonan Han,
Dirk R. Englund
Abstract:
The nitrogen vacancy (NV) center in diamond has emerged as a leading solid-state quantum sensor for applications including magnetometry, electrometry, thermometry, and chemical sensing. However, an outstanding challenge for practical applications is that existing NV-based sensing techniques require bulky and discrete instruments for spin control and detection. Here, we address this challenge by in…
▽ More
The nitrogen vacancy (NV) center in diamond has emerged as a leading solid-state quantum sensor for applications including magnetometry, electrometry, thermometry, and chemical sensing. However, an outstanding challenge for practical applications is that existing NV-based sensing techniques require bulky and discrete instruments for spin control and detection. Here, we address this challenge by integrating NV based quantum sensing with complementary metal-oxide-semiconductor (CMOS) technology. Through tailored CMOS-integrated microwave generation and photodetection, this work dramatically reduces the instrumentation footprint for quantum magnetometry and thermometry. This hybrid diamond-CMOS integration enables an ultra-compact and scalable platform for quantum sensing and quantum information processing.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
Statistical Improvement in Detection Level of Gravitational Microlensing Events from their Light Curves
Authors:
Ichsan Ibrahim,
Hakim L. Malasan,
Chatief Kunjaya,
Anton Timur Jaelani,
Gerhana Puannandra Putri,
Mitra Djamal
Abstract:
In Astronomy, the brightness of a source is typically expressed in terms of magnitude. Conventionally, the magnitude is defined by the logarithm of the received flux. This relationship is known as the Pogson formula. For received flux with a small signal to noise ratio (S/N), however, the formula gives a large magnitude error. We investigate whether the use of Inverse Hyperbolic Sine function (aft…
▽ More
In Astronomy, the brightness of a source is typically expressed in terms of magnitude. Conventionally, the magnitude is defined by the logarithm of the received flux. This relationship is known as the Pogson formula. For received flux with a small signal to noise ratio (S/N), however, the formula gives a large magnitude error. We investigate whether the use of Inverse Hyperbolic Sine function (after this referred to as the Asinh magnitude) in the modified formulae could allow for an alternative calculation of magnitudes for small S/N flux, and whether the new approach is better for representing the brightness of that region. We study the possibility of increasing the detection level of gravitational microlensing using 40 selected microlensing light curves from 2013 and 2014 season and by using the Asinh magnitude. The photometric data of the selected events is obtained from the Observational Gravitational Lensing Experiment (OGLE). We found that the utilization of the Asinh magnitude makes the events brighter compared to using the logarithmic magnitude, with an average of about $3.42 \times10^{-2}$ magnitude and the average of the difference of error between the logarithmic and the Asinh magnitude is about $2.21 \times10^{-2}$ magnitude. The microlensing events, OB 140847 and OB 140885 are found to have the largest difference values among the selected events. Using a Gaussian fit to find the peak for OB140847 and OB140885, we conclude statistically that the Asinh magnitude gives better mean squared values of the regression and narrower residual histograms than the Pogson magnitude. Based on these results, we also attempt to propose a limit of magnitude value from which the use of the Asinh magnitude is optimal for small S/N data.
△ Less
Submitted 3 January, 2018; v1 submitted 21 December, 2015;
originally announced December 2015.
-
Electronic structure and energy level schemes of RE3+:LaSi3N5 and RE2+:LaSi3N5-xOx phosphors (RE= Ce, Pr, Nd, Pm, Sm, Eu) from first principles
Authors:
Ismail A. M. Ibrahim,
Zoltan Lences,
Pavol Sajgalik,
Lubomir Benco,
Martijn Marsman
Abstract:
First principles calculations of rare earth (RE)-doped LaSi3N5 host lattice are performed to obtain the electronic structure, the band gap (BG), and the character of electronic transitions. Doping with both trivalent and bivalent RE cations is inspected. RE 4f states form two bands of occupied and unoccupied states separated by ~5 eV. In RE3+-doped compounds 4f states are shifted by ~6 eV to more…
▽ More
First principles calculations of rare earth (RE)-doped LaSi3N5 host lattice are performed to obtain the electronic structure, the band gap (BG), and the character of electronic transitions. Doping with both trivalent and bivalent RE cations is inspected. RE 4f states form two bands of occupied and unoccupied states separated by ~5 eV. In RE3+-doped compounds 4f states are shifted by ~6 eV to more negative energies compared with RE2+-compounds. This stabilization causes that RE3+ 4f bands are in a different position relative to the valence band and the conduction band than RE2+ 4f bands and therefore different electronic transitions apply. BG of RE3+-compounds decreases from ~4.6 eV (Ce) to ~0.5 eV (Eu). Except for Ce3+, exhibiting the 4f-5d transition, other RE3+-compounds show the charge transfer of the p - 4f character. BG of RE2+-compounds increases from ~0.80 eV (Ce, Pr) to ~0.95 eV (Nd, Pm), ~1.43 eV (Sm), and ~3.28 eV (Eu) and the electronic transition is of the 4f-5d character. The energy level scheme constructed from ab initio calculated electronic structures agrees well with the experimental energy level diagram. The agreement demonstrates the reliability of the hybrid functional HSE06 to describe correctly bands of nonbonding RE 4f electrons.
△ Less
Submitted 20 October, 2014;
originally announced October 2014.
-
Axis of Zodiacal light Near Tropic Cancer
Authors:
S. Nawar,
A. L. Tadross,
J. S. Mikhail,
A. B. Morcos,
Alhassan I. Ibrahim
Abstract:
The axis of zodiacal lights have been obtained in blue and yellow colors using photoelectric observations of zodiacal light. These observations have been carried out at Abu Simbel Site in Egypt, in October 1975. This site lies too near to the tropic of Cancer, at which the axis of the zodiacal light cone perpendiculars to the horizon. The results show that the plane of the zodiacal light is inclin…
▽ More
The axis of zodiacal lights have been obtained in blue and yellow colors using photoelectric observations of zodiacal light. These observations have been carried out at Abu Simbel Site in Egypt, in October 1975. This site lies too near to the tropic of Cancer, at which the axis of the zodiacal light cone perpendiculars to the horizon. The results show that the plane of the zodiacal light is inclined to the normal by 1.59 degrees in blue color and 1.18 degrees in yellow color. This means that there is a slight variation in zodiacal light axis with wavelength, and the axis almost coincide with the ecliptic. The present results for blue color can be considered as the first one in the world near the tropic of Cancer.
△ Less
Submitted 20 March, 2014;
originally announced March 2014.
-
The X-ray Spectrum Of The Black Hole Candidate Swift J1753.5-0127
Authors:
Reham Mostafa,
Mariano Mendez,
Beike Hiemstra,
Paolo Soleri,
Tomaso Belloni,
Alaa I. Ibrahim,
Mohammed N. Yasein
Abstract:
We present a spectral analysis of the black hole candidate and X-ray transient source Swift J1753.5 0127 making use of simultaneous observations of XMM-Newton and Rossi X-ray Timing Explorer (RXTE) in 2006, when the source was in outburst. The aim of this paper is to test whether a thermal component due to the accretion disc is present in the X-ray spectrum. We fit the data with a range of spectra…
▽ More
We present a spectral analysis of the black hole candidate and X-ray transient source Swift J1753.5 0127 making use of simultaneous observations of XMM-Newton and Rossi X-ray Timing Explorer (RXTE) in 2006, when the source was in outburst. The aim of this paper is to test whether a thermal component due to the accretion disc is present in the X-ray spectrum. We fit the data with a range of spectral models, and we find that for all of these models the fits to the X-ray energy spectra significantly require the addition of the disc black-body component. We also find a broad iron emission line at around 6.5 keV, most likely due to iron in the accretion disc. Our results confirm the existence of a cool inner disc extending near or close to the innermost circular orbit (ISCO).We further discovered broad emission lines of NVII and OVIII at ~ 0.52 keV and 0.65 keV, respectively in the RGS spectrum of Swift J1753.5-0127.
△ Less
Submitted 4 March, 2013; v1 submitted 24 February, 2013;
originally announced February 2013.
-
Graphene: Piecing it together
Authors:
Mark H. Rümmeli,
Claudia G. Rocha,
Frank Ortmann,
Imad Ibrahim,
Haldun Sevincli,
Felix Börrnert,
Jens Kunstmann,
Alicja Bachmatiuk,
Markus Pötsche,
Masashi Shiraishi,
Meyya Meyyappan,
Bernd Büchner,
Stephan Roche,
Gianaurelio Cuniberti
Abstract:
Graphene has a multitude of striking properties that make it an exceedingly attractive material for various applications, many of which will emerge over the next decade. However, one of the most promising applications lie in exploiting its peculiar electronic properties which are governed by its electrons obeying a linear dispersion relation. This leads to the observation of half integer quantum h…
▽ More
Graphene has a multitude of striking properties that make it an exceedingly attractive material for various applications, many of which will emerge over the next decade. However, one of the most promising applications lie in exploiting its peculiar electronic properties which are governed by its electrons obeying a linear dispersion relation. This leads to the observation of half integer quantum hall effect and the absence of localization. The latter is attractive for graphene-based field effect transistors. However, if graphene is to be the material for future electronics, then significant hurdles need to be surmounted, namely, it needs to be mass produced in an economically viable manner and be of high crystalline quality with no or virtually no defects or grains boundaries. Moreover, it will need to be processable with atomic precision. Hence, the future of graphene as a material for electronic based devices will depend heavily on our ability to piece graphene together as a single crystal and define its edges with atomic precision. In this progress report, the properties of graphene that make it so attractive as a material for electronics is introduced to the reader. The focus then centers on current synthesis strategies for graphene and their weaknesses in terms of electronics applications are highlighted.
△ Less
Submitted 3 August, 2011;
originally announced August 2011.
-
Discovery of Quasi-Periodic Oscillations in the Recurrent Burst Emission from SGR 1806-20
Authors:
Ahmed M. El-Mezeini,
Alaa I. Ibrahim
Abstract:
We present evidence for Quasi-Periodic Oscillations (QPOs) in the recurrent outburst emission from the soft gamma repeater SGR 1806-20 using NASA's Rossi X-ray Timing Explorer (RXTE) observations. By searching a sample of 30 bursts for timing signals at the frequencies of the QPOs discovered in the 2004 December 27 giant flare from the source, we find three QPOs at 84, 103, and 648 Hz in three dif…
▽ More
We present evidence for Quasi-Periodic Oscillations (QPOs) in the recurrent outburst emission from the soft gamma repeater SGR 1806-20 using NASA's Rossi X-ray Timing Explorer (RXTE) observations. By searching a sample of 30 bursts for timing signals at the frequencies of the QPOs discovered in the 2004 December 27 giant flare from the source, we find three QPOs at 84, 103, and 648 Hz in three different bursts. The first two QPOs lie within $\sim$ 1$\: σ$ from the 92 Hz QPO detected in the giant flare. The third QPO lie within $\sim$ 9$\: σ$ from the 625 Hz QPO also detected in the same flare. The detected QPOs are found in bursts with different durations, morphologies, and brightness, and are vindicated by Monte Carlo simulations, which set a lower limit confidence interval $\geq 4.3 σ$. We also find evidence for candidate QPOs at higher frequencies in other bursts with lower statistical significance. The fact that we can find evidence for QPOs in the recurrent bursts at frequencies relatively close to those found in the giant flare is intriguing and can offer insight about the origin of the oscillations. We confront our finding against the available theoretical models and discuss the connection between the QPOs we report and those detected in the giant flares. The implications to the neutron star properties are also discussed.
△ Less
Submitted 26 August, 2010; v1 submitted 23 August, 2010;
originally announced August 2010.
-
Evidence For Quasi-Periodic Oscillations In The Recurrent Bursts From SGR 1806-20
Authors:
Ahmed M. El-Mezeini,
Alaa I. Ibrahim
Abstract:
We present evidence for Quasi Periodic Oscillations (QPOs) in the recurrent outburst activity from SGR 1806-20 using Rossi X-ray Timing Explorer (RXTE) observations during November 1996. Searching for QPOs in a sample of 30 bursts at similar frequencies to those previously reported in the December 27, 2004 giant flare, we find evidence for a QPO in a burst at 648 Hz at 5.17σ confidence level, lyin…
▽ More
We present evidence for Quasi Periodic Oscillations (QPOs) in the recurrent outburst activity from SGR 1806-20 using Rossi X-ray Timing Explorer (RXTE) observations during November 1996. Searching for QPOs in a sample of 30 bursts at similar frequencies to those previously reported in the December 27, 2004 giant flare, we find evidence for a QPO in a burst at 648 Hz at 5.17σ confidence level, lying within 3.75% from the 625 Hz QPO discovered in the giant flare. Two additional features are also detected around 84 and 103 Hz in two other bursts at 4.2σ and 4.8σ confidence level, respectively, which lie within 8.85% and 11.83% respectively from the QPO at 92.5 Hz also detected in the giant flare. Accounting for the number of bursts analyzed the confidence levels for the 84, 103 and 648 Hz becomes 3σ, 3.6σ and 3.4σ respectively. Extending our search to other frequency ranges, we find candidates at 1096, 1230, 2785 and 3690 Hz in 3 different bursts with confidence levels lying between 4.14σ-4.46σ, which is reduced to 2.3σ-3σ after accounting for a certain confirmation bias in each case. The fact that we can find evidence for QPOs in the recurrent bursts at frequencies relatively close to those found in the giant flare is intriguing. We examine the candidate QPOs in relation with those found in the giant flare and discuss their possible physical origin.
△ Less
Submitted 21 August, 2010;
originally announced August 2010.
-
SWIFT-BAT observations of the recently discovered magnetar SGR 0501+4516
Authors:
Harsha S. Kumar,
Alaa. I. Ibrahim,
Samar Safi-Harb
Abstract:
We present results on the Soft Gamma Repeater (SGR) 0501+4516, discovered by the SWIFT Burst Alert Telescope (BAT) on 2008 August 22. More than 50 bursts were identified from this source, out of which 18 bursts had enough counts to carry out spectral analysis. We performed time-averaged spectral analysis on these 18 bursts using 8 models, among which the cut-off powerlaw and the two-blackbody mode…
▽ More
We present results on the Soft Gamma Repeater (SGR) 0501+4516, discovered by the SWIFT Burst Alert Telescope (BAT) on 2008 August 22. More than 50 bursts were identified from this source, out of which 18 bursts had enough counts to carry out spectral analysis. We performed time-averaged spectral analysis on these 18 bursts using 8 models, among which the cut-off powerlaw and the two-blackbody models provided the best fit in the 15-150 keV energy range. The cut-off powerlaw model fit yields a mean photon index Gamma_{CPL} = 0.54+/-0.11 and a cut-off energy E_C = 19.1+/-1.8 keV for the bursts. The mean hard and soft blackbody temperatures are found to be kT_{BB_h} = 12.8+/-0.7 keV and kT_{BB_s} = 4.6+/-0.5 keV, respectively, and are anti-correlated with the square of the radii of the hard and soft emitting regions (R_{BB_h} and R_{BB_s}) as R_{BB_h}^2 $\propto$ kT^{-5.8} and R_{BB_s}^2 $\propto$ kT^{-2.7}, respectively. The soft and hard component temperatures with different indices support the idea of two distinct emitting regions with the hard component corresponding to a smaller radius and the soft component corresponding to a larger radius, which further corroborate the idea of the propagation of extraordinary (E) and ordinary (O) mode photons across the photosphere, as predicted in the magnetar model. We notice strong burst fluence-duration correlation as well as hardness ratio-duration and hardness ratio-fluence anti-correlations for the SGR 0501+4516 bursts. The burst fluences range from ~ 4.4\times10^{-9} ergs/cm^-2 to ~ 2.7\times10^{-6} ergs/cm^{-2}, consistent with those observed for typical short SGR bursts.
△ Less
Submitted 22 April, 2010;
originally announced April 2010.
-
Discovery of a New Transient Magnetar Candidate: XTE J1810-197
Authors:
A. I. Ibrahim,
C. Markwardt,
J. Swank,
S. Ransom,
M. Roberts,
V. Kaspi,
P. Woods,
S. Safi-Harb,
S. Balman,
W. Parke,
C. Kouveliotou,
K. Hurley,
T. Cline
Abstract:
We report the discovery of a new X-ray pulsar, XTE J1810-197. The source was serendipitously discovered on 2003 July 15 by the Rossi X-ray Timing Explorer (RXTE) while observing the soft gamma repeater SGR 1806-20. The pulsar has a 5.54 s spin-period and a soft spectrum (photon index ~ 4). We detect the source in earlier RXTE observations back to 2003 January. These show that a transient outburs…
▽ More
We report the discovery of a new X-ray pulsar, XTE J1810-197. The source was serendipitously discovered on 2003 July 15 by the Rossi X-ray Timing Explorer (RXTE) while observing the soft gamma repeater SGR 1806-20. The pulsar has a 5.54 s spin-period and a soft spectrum (photon index ~ 4). We detect the source in earlier RXTE observations back to 2003 January. These show that a transient outburst began between 2002 November 17 and 2003 January 23 and that the pulsar has been spinning down since then, with a high rate Pdot ~ 10^-11 s/s showing significant timing noise, but no evidence for Doppler shifts due to a binary companion. The rapid spin-down rate and slow spin-period imply a super-critical magnetic field B=3x10^14 G and a young characteristic age < 7600 yr. These properties are strikingly similar to those of anomalous X-ray pulsars and soft gamma repeaters, making the source a likely new magnetar. A follow-up Chandra observation provided a 2".5 radius error circle within which the 1.5 m Russian-Turkish Optical Telescope RTT150 found a limiting magnitude of R_c=21.5, in accord with other recently reported limits. The source is present in archival ASCA and ROSAT data as well, at a level 100 times fainter than the \~ 3 mCrab seen in 2003. This suggests that other X-ray sources that are currently in a state similar to the inactive phase of XTE J1810-197 may also be unidentified magnetars awaiting detection via a similar activity.
△ Less
Submitted 23 October, 2003;
originally announced October 2003.
-
New Evidence for Proton Cyclotron Resonance in a Magnetar Strength Field from SGR 1806-20
Authors:
Alaa I. Ibrahim,
Jean H. Swank,
William Parke
Abstract:
A great deal of evidence has recently been gathered in favor of the picture that Soft Gamma Repeaters and Anomalous X-Ray Pulsars are powered by ultra-strong magnetic fields (B > 10^{14} G; i.e. magnetars). Nevertheless, present determination of the magnetic field in such magnetar candidates has been indirect and model dependent. A key prediction concerning magnetars is the detection of ion cycl…
▽ More
A great deal of evidence has recently been gathered in favor of the picture that Soft Gamma Repeaters and Anomalous X-Ray Pulsars are powered by ultra-strong magnetic fields (B > 10^{14} G; i.e. magnetars). Nevertheless, present determination of the magnetic field in such magnetar candidates has been indirect and model dependent. A key prediction concerning magnetars is the detection of ion cyclotron resonance features, which would offer a decisive diagnostic of the field strength. Here we present the detection of a 5 keV absorption feature in a variety of bursts from the Soft Gamma Repeater SGR 1806-20, confirming our initial discovery (Ibrahim et al. 2002) and establishing the presence of the feature in the source's burst spectra. The line feature is well explained as proton cyclotron resonance in an ultra-strong magnetic field, offering a direct measurement of SGR 1806-20's magnetic field (B ~ 10^{15} G) and a clear evidence of a magnetar. Together with the source's spin-down rate, the feature also provides the first measurement of the gravitational redshift, mass and radius of a magnetar.
△ Less
Submitted 23 October, 2002;
originally announced October 2002.
-
Discovery of Cyclotron Resonance Features in the Soft Gamma Repeater SGR 1806-20
Authors:
Alaa I. Ibrahim,
Samar Safi-Harb,
Jean H. Swank,
William Parke,
Silvia Zane,
Roberto Turolla
Abstract:
We report evidence of cyclotron resonance features from the Soft Gamma Repeater SGR 1806-20 in outburst, detected with the Rossi X-ray Timing Explorer in the spectrum of a long, complex precursor that preceded a strong burst. The features consist of a narrow 5.0 keV absorption line with modulation near its second and third harmonics (at 11.2 keV and 17.5 keV respectively). The line features are…
▽ More
We report evidence of cyclotron resonance features from the Soft Gamma Repeater SGR 1806-20 in outburst, detected with the Rossi X-ray Timing Explorer in the spectrum of a long, complex precursor that preceded a strong burst. The features consist of a narrow 5.0 keV absorption line with modulation near its second and third harmonics (at 11.2 keV and 17.5 keV respectively). The line features are transient and are detected in the harder part of the precursor. The 5.0 keV feature is strong, with an equivalent width of ~ 500 eV and a narrow width of less than 0.4 keV. Interpreting the features as electron cyclotron lines in the context of accretion models leads to a large mass-radius ratio (M/R > 0.3 M_sun/km) that is inconsistent with neutron stars or that requires a low (5-7)x10^{11} G magnetic field that is unlikely for SGRs. The line widths are also narrow compared with those of electron cyclotron resonances observed so far in X-ray pulsars. In the magnetar picture, the features are plausibly explained as ion cyclotron resonances in an ultra-strong magnetic field that have recently been predicted from magnetar candidates. In this view, the 5.0 keV feature is consistent with a proton cyclotron fundamental whose energy and width are close to model predictions. The line energy would correspond to a surface magnetic field of 1.0x10^{15} G for SGR 1806-20, in good agreement with that inferred from the spin-down measure in the source.
△ Less
Submitted 23 October, 2002;
originally announced October 2002.
-
An Unusual Burst from Soft Gamma Repeater SGR 1900+14: Comparisons with Giant Flares and Implications for the Magnetar Model
Authors:
Alaa I. Ibrahim,
Tod E. Strohmayer,
Peter M. Woods,
Chryssa Kouveliotou,
Christopher Thompson,
Robert C. Duncan,
Stefan Dieters,
Jan van Paradijs,
Mark Finger
Abstract:
The Soft Gamma Repeater SGR 1900+14 entered a remarkable phase of activity during the summer of 1998. This activity peaked on August 27, 1998 when a giant periodic gamma-ray flare resembling the famous March 5, 1979 event from SGR 0526-66 was recorded. Two days later (August 29), a strong, bright burst was detected with RXTE and BATSE. This event reveals several similarities to the giant flares…
▽ More
The Soft Gamma Repeater SGR 1900+14 entered a remarkable phase of activity during the summer of 1998. This activity peaked on August 27, 1998 when a giant periodic gamma-ray flare resembling the famous March 5, 1979 event from SGR 0526-66 was recorded. Two days later (August 29), a strong, bright burst was detected with RXTE and BATSE. This event reveals several similarities to the giant flares of August 27 and March 5, and shows a number of unique features not previously seen in SGR bursts. Unlike typically short SGR bursts, this event features a 3.5 s burst peak that was preceded by an extended (~ 1 s) complex precursor, and followed by a long (~ 1000 s) periodic tail modulated at the 5.16 s stellar rotation period. Spectral analysis shows a striking distinction between the spectral behavior of the precursor, burst peak and extended tail. While the spectrum during the peak is uniform, a significant spectral evolution is detected in both the precursor and tail emissions. Temporal behavior shows a sharp rise (~ 9.8 ms) at the event onset and a rapid cutoff (~ 17 ms) at the end of the burst peak. The tail pulsations show a simple pulse profile consisting of one 5.16 s peak that did not evolve with time. The spectral and temporal signatures of this event imply that the precursor, main peak, and extended tail are produced by different physical mechanisms. We discuss these features and their implications in the context of the magnetar model. The energetics of the August 29 event, and its close proximity to the August 27 flare, suggest that it is an `aftershock' of the preceding giant flare. "P.S. This is an abbreviated version of the original abstract."
△ Less
Submitted 7 July, 2000; v1 submitted 5 July, 2000;
originally announced July 2000.
-
Discovery of a 6.4 keV Emission Line in a Burst from SGR 1900+14
Authors:
Tod E. Strohmayer,
Alaa I. Ibrahim
Abstract:
We present evidence of a 6.4 keV emission line during a burst from the soft gamma-ray repeater SGR 1900+14. The Rossi X-ray Timing Explorer (RXTE) monitored this source extensively during its outburst in the summer of 1998. A strong burst observed on August 29, 1998 revealed a number of unique properties. The burst exhibits a precursor and is followed by a long (~ 1000 s) tail modulated at the 5…
▽ More
We present evidence of a 6.4 keV emission line during a burst from the soft gamma-ray repeater SGR 1900+14. The Rossi X-ray Timing Explorer (RXTE) monitored this source extensively during its outburst in the summer of 1998. A strong burst observed on August 29, 1998 revealed a number of unique properties. The burst exhibits a precursor and is followed by a long (~ 1000 s) tail modulated at the 5.16 s stellar rotation period. The precursor has a duration of 0.85 s and shows both significant spectral evolution as well as an emission feature centered near 6.4 keV during the first 0.3 s of the event, when the X-ray spectrum was hardest. The continuum during the burst is well fit with an optically thin thermal bremsstrahlung (OTTB) spectrum with the temperature ranging from about 40 to 10 keV. The line is strong, with an equivalent width of 400 eV, and is consistent with Fe K-alpha fluorescence from relatively cool material. If the rest-frame energy is indeed 6.4 keV, then the lack of an observed redshift indicates that the source is at least 80 km above the neutron star surface. We discuss the implications of the line detection in the context of models for SGRs.
△ Less
Submitted 22 May, 2000;
originally announced May 2000.