Showing 1–7 of 7 results for author: Kao, I

Unconventional Unidirectional Magnetoresistance in vdW Heterostructures

Authors: I-Hsuan Kao, Junyu Tang, Gabriel Calderon Ortiz, Menglin Zhu, Sean Yuan, Rahul Rao, Jiahan Li, James H. Edgar, Jiaqiang Yan, David G. Mandrus, Kenji Watanabe, Takashi Taniguchi, Jinwoo Hwang, Ran Cheng, Jyoti Katoch, Simranjeet Singh

Abstract: Electrical readout of magnetic states is a key to realize novel spintronics devices for efficient computing and data storage. Unidirectional magnetoresistance (UMR) in bilayer systems, consisting of a spin source material and a magnetic layer, refers to a change in the longitudinal resistance upon the reversal of magnetization, which typically originates from the interaction of spin-current and ma… ▽ More Electrical readout of magnetic states is a key to realize novel spintronics devices for efficient computing and data storage. Unidirectional magnetoresistance (UMR) in bilayer systems, consisting of a spin source material and a magnetic layer, refers to a change in the longitudinal resistance upon the reversal of magnetization, which typically originates from the interaction of spin-current and magnetization at the interface. Because of UMR s linear dependence on applied charge current and magnetization, it can be used to electrically read the magnetization state. However, in conventional spin source materials, the spin polarization of an electric field induced spin current is restricted to be in the film plane and hence the ensuing UMR can only respond to the in plane component of the magnetization. On the other hand, magnets with perpendicular magnetic anisotropy (PMA) are highly desired for magnetic memory and spin-logic devices, while the electrical read out of PMA magnets through UMR is critically missing. Here, we report the discovery of an unconventional UMR in bilayer heterostructures of a topological semimetal (WTe2) and a PMA ferromagnetic insulator (Cr2Ge2Te6, CGT), which allows to electrically read the up and down magnetic states of the CGT layer by measuring the longitudinal resistance. Our theoretical calculations based on a tight binding model show that the unconventional UMR originates from the interplay of crystal symmetry breaking in WTe2 and magnetic exchange interaction across the WTe2 and CGT interface. Combining with the ability of WTe2 to obtain magnetic field free switching of the PMA magnets, our discoveries open an exciting pathway to achieve two terminal magnetic memory devices that operate solely on the spin orbit torque and UMR, which is critical for developing next-generation non volatile and low power consumption data storage technologies. △ Less

Submitted 17 May, 2024; originally announced May 2024.

Revealing the EuCd_{2}As_{2} Semiconducting Band Gap via n-type La-Doping

Authors: Ryan A. Nelson, Jesaiah King, Shuyu Cheng, Archibald J. Williams, Christopher Jozwiak, Aaron Bostwick, Eli Rotenberg, Souvik Sasmal, I-Hsuan Kao, Aalok Tiwari, Natalie R. Jones, Chuting Cai, Emma Martin, Andrei Dolocan, Li Shi, Roland Kawakami, Joseph P. Heremans, Jyoti Katoch, Joshua E. Goldberger

Abstract: EuCd_{2}As_{2} has attracted considerable interest as one of the few magnetic Weyl semimetal candidate materials, although recently there have been emerging reports that claim it to have a semiconducting electronic structure. To resolve this debate, we established the growth of n-type EuCd_{2}As_{2} crystals, to directly visualize the nature of the conduction band using angle resolve photoemission… ▽ More EuCd_{2}As_{2} has attracted considerable interest as one of the few magnetic Weyl semimetal candidate materials, although recently there have been emerging reports that claim it to have a semiconducting electronic structure. To resolve this debate, we established the growth of n-type EuCd_{2}As_{2} crystals, to directly visualize the nature of the conduction band using angle resolve photoemission spectroscopy (ARPES). We show that La-doping leads to n-type transport signatures in both the thermopower and Hall effect measurements, in crystals with doping levels at 2 - 6 x 10^{17} e^{-} cm^{-3}. Both p-type and n-type doped samples exhibit antiferromagnetic ordering at 9 K. ARPES experiments at 6 K clearly show the presence of the conduction band minimum at 0.8 eV above the valence band maximum, which is further corroborated by the observation of a 0.71 - 0.72 eV band gap in room temperature diffuse reflectance absorbance measurements. Together these findings unambiguously show that EuCd_{2}As_{2} is indeed a semiconductor with a substantial band gap and not a topological semimetal. △ Less

Submitted 4 March, 2024; originally announced March 2024.

A Question-Answer Driven Approach to Reveal Affirmative Interpretations from Verbal Negations

Authors: Md Mosharaf Hossain, Luke Holman, Anusha Kakileti, Tiffany Iris Kao, Nathan Raul Brito, Aaron Abraham Mathews, Eduardo Blanco

Abstract: This paper explores a question-answer driven approach to reveal affirmative interpretations from verbal negations (i.e., when a negation cue grammatically modifies a verb). We create a new corpus consisting of 4,472 verbal negations and discover that 67.1% of them convey that an event actually occurred. Annotators generate and answer 7,277 questions for the 3,001 negations that convey an affirmati… ▽ More This paper explores a question-answer driven approach to reveal affirmative interpretations from verbal negations (i.e., when a negation cue grammatically modifies a verb). We create a new corpus consisting of 4,472 verbal negations and discover that 67.1% of them convey that an event actually occurred. Annotators generate and answer 7,277 questions for the 3,001 negations that convey an affirmative interpretation. We first cast the problem of revealing affirmative interpretations from negations as a natural language inference (NLI) classification task. Experimental results show that state-of-the-art transformers trained with existing NLI corpora are insufficient to reveal affirmative interpretations. We also observe, however, that fine-tuning brings small improvements. In addition to NLI classification, we also explore the more realistic task of generating affirmative interpretations directly from negations with the T5 transformer. We conclude that the generation task remains a challenge as T5 substantially underperforms humans. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Comments: Accepted at the Findings of NAACL 2022

Design of Outdoor Autonomous Moble Robot

Authors: I-Hsi Kao, Jian-An Su, Jau-Woei Perng

Abstract: This study presents the design of a six-wheeled outdoor autonomous mobile robot. The main design goal of our robot is to increase its adaptability and flexibility when moving outdoors. This six-wheeled robot platform was equipped with some sensors, such as a global positioning system (GPS), high definition (HD) webcam, light detection and ranging (LiDAR), and rotary encoders. A personal mobile com… ▽ More This study presents the design of a six-wheeled outdoor autonomous mobile robot. The main design goal of our robot is to increase its adaptability and flexibility when moving outdoors. This six-wheeled robot platform was equipped with some sensors, such as a global positioning system (GPS), high definition (HD) webcam, light detection and ranging (LiDAR), and rotary encoders. A personal mobile computer and 86Duino ONE microcontroller were used as the algorithm computing platform. In terms of control, the lateral offset and head angle offset of the robot were calculated using a differential GPS or a camera to detect structured and unstructured road boundaries. The lateral offset and head angle offset were fed to a fuzzy controller. The control input was designed by Q-learning of the differential speed between the left and right wheels. This made the robot track a reference route so that it could stay in its own lane. 2D LiDAR was also used to measure the relative distance from the front obstacle. The robot would immediately stop to avoid a collision when the distance between the robot and obstacle was less than a specific safety distance. A custom-designed rocker arm gave the robot the ability to climb a low step. Body balance could be maintained by controlling the angle of the rocker arm when the robot changed its pose. The autonomous mobile robot has been used for delivery service on our campus road by integrating the above system functionality. △ Less

Submitted 29 January, 2022; originally announced January 2022.

Comments: International Conference on Recent Innovations in Biotechnology, System Engineering, Applied Sciences, Space Environment & Aviation Technology

Design of Sensor Fusion Driver Assistance System for Active Pedestrian Safety

Authors: I-Hsi Kao, Ya-Zhu Yian, Jian-An Su, Yi-Horng Lai, Jau-Woei Perng, Tung-Li Hsieh, Yi-Shueh Tsai, Min-Shiu Hsieh

Abstract: In this paper, we present a parallel architecture for a sensor fusion detection system that combines a camera and 1D light detection and ranging (lidar) sensor for object detection. The system contains two object detection methods, one based on an optical flow, and the other using lidar. The two sensors can effectively complement the defects of the other. The accurate longitudinal accuracy of the… ▽ More In this paper, we present a parallel architecture for a sensor fusion detection system that combines a camera and 1D light detection and ranging (lidar) sensor for object detection. The system contains two object detection methods, one based on an optical flow, and the other using lidar. The two sensors can effectively complement the defects of the other. The accurate longitudinal accuracy of the object's location and its lateral movement information can be achieved simultaneously. Using a spatio-temporal alignment and a policy of sensor fusion, we completed the development of a fusion detection system with high reliability at distances of up to 20 m. Test results show that the proposed system achieves a high level of accuracy for pedestrian or object detection in front of a vehicle, and has high robustness to special environments. △ Less

Submitted 23 January, 2022; originally announced January 2022.

Comments: The 14th International Conference on Automation Technology (Automation 2017), December 8-10, 2017, Kaohsiung, Taiwan

Field-free deterministic switching of a perpendicularly polarized magnet using unconventional spin-orbit torques in WTe2

Authors: I-Hsuan Kao, Ryan Muzzio, Hantao Zhang, Menglin Zhu, Jacob Gobbo, Daniel Weber, Rahul Rao, Jiahan Li, James H. Edgar, Joshua E. Goldberger, Jiaqiang Yan, David G. Mandrus, Jinwoo Hwang, Ran Cheng, Jyoti Katoch, Simranjeet Singh

Abstract: Spin-orbit torque (SOT) driven deterministic control of the magnetization state of a magnet with perpendicular magnetic anisotropy (PMA) is key to next generation spintronic applications including non-volatile, ultrafast, and energy efficient data storage devices. But, field-free deterministic switching of perpendicular magnetization remains a challenge because it requires an out-of-plane anti-dam… ▽ More Spin-orbit torque (SOT) driven deterministic control of the magnetization state of a magnet with perpendicular magnetic anisotropy (PMA) is key to next generation spintronic applications including non-volatile, ultrafast, and energy efficient data storage devices. But, field-free deterministic switching of perpendicular magnetization remains a challenge because it requires an out-of-plane anti-damping torque, which is not allowed in conventional spin source materials such as heavy metals (HM) and topological insulators due to the system's symmetry. The exploitation of low-crystal symmetries in emergent quantum materials offers a unique approach to achieve SOTs with unconventional forms. Here, we report the first experimental realization of field-free deterministic magnetic switching of a perpendicularly polarized van der Waals (vdW) magnet employing an out-of-plane anti-damping SOT generated in layered WTe2 which is a low-crystal symmetry quantum material. The numerical simulations confirm that out-of-plane antidamping torque in WTe2 is responsible for the observed magnetization switching in the perpendicular direction. △ Less

Submitted 22 December, 2020; originally announced December 2020.

Possible coexistence of double-Q magnetic order and chequerboard charge order in the re-entrant tetragonal phase of Ba0.76K0.24Fe2As2

Authors: Jianqiang Hou, Chang-woo Cho, Junying Shen, Pok Man Tam, I-Hsuan Kao, Mang Hei Gordon Lee, Peter Adelmann, Thomas Wolf, Rolf Lortz

Abstract: We investigate the re-entrant tetragonal phase in the iron-based superconductor Ba0 .76K0.24Fe2As2 by DC magnetization and thermoelectrical measurements. The reversible magnetization confirms by a thermodynamic method that the spin alignment in the re-entrant C4 phase is out-of-plane, in agreement with an itinerant double-Q magnetic order [Allred et al., Nat. Phys. 12, 493 (2016)]. The Nernst coef… ▽ More We investigate the re-entrant tetragonal phase in the iron-based superconductor Ba0 .76K0.24Fe2As2 by DC magnetization and thermoelectrical measurements. The reversible magnetization confirms by a thermodynamic method that the spin alignment in the re-entrant C4 phase is out-of-plane, in agreement with an itinerant double-Q magnetic order [Allred et al., Nat. Phys. 12, 493 (2016)]. The Nernst coefficient shows the typical unusually large negative value in the stripe-type spin density wave (SDW) state owing to the Fermi surface reconstruction associated with SDW and nematic order. At the transition into the re-entrant C4 tetragonal phase it hardly changes, which could indicate that instead of a complete vanishing of the associated charge order, the spin reorientation could trigger a redistribution of the charges to form a secondary charge order, e.g. in form of a chequerboard-like pattern that no longer breaks the rotational C4 symmetry. △ Less

Submitted 18 May, 2017; originally announced May 2017.