-
arXiv:0711.1490 [pdf, ps, other]
Summary of SLAC'S SEY Measurement On Flat Accelerator Wall Materials
Abstract: The electron cloud effect (ECE) causes beam instabilities in accelerator structures with intense positively charged bunched beams. Reduction of the secondary electron yield (SEY) of the beam pipe inner wall is effective in controlling cloud formation. We summarize SEY results obtained from flat TiN, TiZrV and Al surfaces carried out in a laboratory environment. SEY was measured after thermal con… ▽ More
Submitted 9 November, 2007; originally announced November 2007.
Comments: Presented at International Workshop on Electron-Cloud Effects (ECLOUD07), Daegu, Korea 5 figures, 4 pages
Report number: SLAC-PUB-12541
-
The Effect of Gas Ion Bombardment on the Secondary Electron Yield of TiN, TiCN and TiZrV Coatings For Suppressing Collective Electron Effects in Storage Rings
Abstract: In many accelerator storage rings running positively charged beams, ionization of residual gas and secondary electron emission (SEE) in the beam pipe will give rise to an electron cloud which can cause beam blow-up or loss of the circulating beam. A preventative measure that suppresses electron cloud formation is to ensure that the vacuum wall has a low secondary emission yield (SEY). The SEY of… ▽ More
Submitted 22 March, 2006; v1 submitted 26 January, 2006; originally announced January 2006.
Comments: 15 pages - 7 figures - 8 tables, submitted to NIM A
Report number: SLAC - PUB - 11621
Journal ref: Nucl.Instrum.Meth. A564 (2006) 44-50
-
Polarized Electrons for Linear Colliders
Abstract: Future electron-positron linear colliders require a highly polarized electron beam with a pulse structure that depends primarily on whether the acceleration utilizes warm or superconducting rf structures. The International Linear Collider (ILC) will use cold structures for the main linac. It is shown that a dc-biased polarized photoelectron source such as successfully used for the SLC can meet t… ▽ More
Submitted 17 December, 2004; originally announced December 2004.
Comments: 4 pages, 2 tables, contributed to SPIN04 Symposium (Trieste)
Report number: SLAC-PUB-10867
-
Electron Conditioning of Technical Aluminium Surfaces: Effect on the Secondary Electron Yield
Abstract: The effect of electron conditioning on commercially aluminium alloys 1100 and 6063 were investigated. Contrary to the assumption that electron conditioning, if performed long enough, can reduce and stabilize the SEY to low values ($\leq 1.3$, value of many pure elements), the SEY of aluminium did not go lower than 1.8. In fact, it reincreases with continued electron exposure dose.
Submitted 16 December, 2004; originally announced December 2004.
Comments: 36 pages, 25 figures, submitted to JVST A
Report number: SLAC-PUB-10894
Journal ref: J.Vac.Sci.Tech. A23 (2005) 1610
-
A systematic study of polarized electron emission from strained GaAs/GaAsP superlattice photocathodes
Abstract: Spin-polarized electron photoemission has been studied for GaAs/GaAs$_{1-x}$P$_x$ strained superlattice cathodes grown by gas-source molecular beam epitaxy. The superlattice structural parameters are systematically varied to optimize the photoemission characteristics. The heavy-hole and light-hole transitions are reproducibly observed in quantum efficiency spectra, enabling direct measurement of… ▽ More
Submitted 16 December, 2004; originally announced December 2004.
-
Atomic Hydrogen Cleaning of Polarized GaAs Photocathodes
Abstract: Atomic hydrogen cleaning followed by heat cleaning at 450$^\circ$C was used to prepare negative-electron-affinity GaAs photocathodes. When hydrogen ions were eliminated, quantum efficiencies of 15% were obtained for bulk GaAs cathodes, higher than the results obtained using conventional 600$^\circ$C heat cleaning. The low-temperature cleaning technique was successfully applied to thin, strained… ▽ More
Submitted 16 December, 2004; originally announced December 2004.
-
Secondary electron yield measurements from thin surface coatings for NLC electron cloud reduction
Abstract: In the beam pipe of the positron damping ring of the Next Linear Collider, electrons will be created by beam interaction with the surrounding vacuum chamber wall and give rise to an electron cloud. Several solutions are possible for avoiding the electron cloud, without changing the bunch structure or the diameter of the vacuum chamber. Some of the currently available solutions for preventing thi… ▽ More
Submitted 19 May, 2004; originally announced May 2004.
Comments: 3 Pages, 6 figure, Presented at EPAC 2004, Lucerne (CH)
Report number: SLAC-PUB-10438
-
Recent Progress at SLAC Extracting High Charge from Highly-Polarized Photocathodes for Future-Collider Applications
Abstract: Future colliders such as NLC and JLC will require a highly-polarized macropulse with charge that is more than an order of magnitude beyond that which could be produced for the SLC. The maximum charge from the SLC uniformly-doped GaAs photocathode was limited by the surface charge limit (SCL). The SCL effect can be overcome by using an extremely high (>1019 cm-3) surface dopant concentration. Whe… ▽ More
Submitted 21 January, 2004; originally announced January 2004.
Comments: 11 pages, 3 figures, 1 table, contributed to 10th Workshop on Polarized Sources and Targets, Novosibirsk, Sept. 22-26, 2003, to be submitted to Nucl. Instrum. and Meth. A
Report number: SLAC-PUB-10304
Journal ref: Nucl.Instrum.Meth. A536 (2005) 308-311
-
Secondary Electron Yield Measurements of TiN Coating and TiZrV Getter Film
Abstract: In the beam pipe of the positron Main Damping Ring (MDR) of the Next Linear Collider (NLC), ionization of residual gases and secondary electron emission give rise to an electron cloud which can cause the loss of the circulating beam. One path to avoid the electron cloud is to ensure that the vacuum wall has low secondary emission yield and, therefore, we need to know the secondary emission yield… ▽ More
Submitted 30 August, 2004; v1 submitted 15 October, 2003; originally announced October 2003.
Comments: 14 pages, 16 figures
Report number: SLAC-TN-03-052 LCC-0128
-
Surface Analysis of OFE-Copper X-Band Accelerating Structures and Possible Correlation to RF Breakdown Events
Abstract: X-band accelerator structures meeting the Next Linear Collider (NLC) design requirements have been found to suffer vacuum surface damage caused by radio frequency (RF) breakdown, when processed to high electric-field gradients. Improved understanding of these breakdown events is desirable for the development of structure designs, fabrication procedures, and processing techniques that minimize st… ▽ More
Submitted 13 October, 2003; originally announced October 2003.
Comments: 21 pages, 8 figures, 4 tables, Submitted to JVST A as a proceeding of the 50th AVS conference (Baltimore, MD, 2-7 Nov 2003)
Report number: SLAC-PUB-10197
Journal ref: J.Vac.Sci.Technol.A Vac.Surf.Films 22 (2004) 1326
-
Autopsy on an RF-Processed X-band Travelling Wave Structure
Abstract: In an effort to locate the cause(s) of high electric-field breakdown in x-band accelerating structures, we have cleanly-autopsied (no debris added by post-operation structure disassembly) an RF-processed structure. Macroscopic localization provided operationally by RF reflected wave analysis and acoustic sensor pickup was used to connect breakdowns to autopsied crater damage areas. Surprisingly,… ▽ More
Submitted 3 October, 2002; originally announced October 2002.
Comments: 9 Figures, 3 pages presented at LINAC 2002 Gyeongju Korea
Report number: SLAC-PUB-9526
-
A Polarized Electron RF Photoinjector Using the Plane-Wave-Transformer (PWT) Design
Abstract: Polarized electron beams are now in routine use in particle accelerators for nuclear and high energy physics experiments. These beams are presently produced by dc-biased photoelectron sources combined with rf chopping and bunching systems with inherently high transverse emittances. Low emittances can be produced with an rf gun, but the vacuum environment has until now been considered too harsh t… ▽ More
Submitted 3 May, 2002; originally announced May 2002.
Comments: 14 pages, 5 figures, to be submitted to PRST-AB
Report number: SLAC-PUB-8971
-
Observation of Plasma Focusing of a 28.5 GeV Positron Beam
Abstract: The observation of plasma focusing of a 28.5 GeV positron beam is reported. The plasma was formed by ionizing a nitrogen jet only 3 mm thick. Simultaneous focusing in both transverse dimensions was observed with effective focusing strengths of order Tesla per micron. The minimum area of the beam spot was reduced by a factor of 2.0 +/- 0.3 by the plasma. The longitudinal beam envelope was measure… ▽ More
Submitted 4 October, 2001; originally announced October 2001.
Report number: SLAC-PUB-8975
Journal ref: Phys.Rev.Lett. 87 (2001) 244801
-
Photoinjector design for the LCLS
Abstract: The design of the Linac Coherent Light Source assumes that a low-emittance, 1-nC, 10-ps beam will be available for injection into the 15-GeV linac. The proposed rf photocathode injector that will provide a 150-MeV beam with rms normalized emittances of 1 mm in both the transverse and longitudinal dimensions is based on a 1.6-cell S-band rf gun that is equipped with an emittance compensating sole… ▽ More
Submitted 5 November, 2001; v1 submitted 24 August, 2001; originally announced August 2001.
Comments: 13 pages (double spaced), 4 figures, contributed to The 23rd International Free Electron Laser Conference, Darmstadt, Germany, 20-24 August 2001
Report number: SLAC-PUB-8962
Journal ref: Nucl.Instrum.Meth. A483 (2002) 296-300
-
Photovoltage Effects in Photoemission from Thin GaAs Layers
Abstract: A set of thin GaAs p-type negative electron affinity (NEA) photocathodes have been used to measure the yield of photoemitted electrons at high intensity excitation. The active layer thickness is 100 nm and the p-type doping ranges from 5\times10^{18} cm^{-3} to 5\times10^{19} cm^{-3} for a set of four samples. The results show that the surface escape probability is a linear function of the NEA e… ▽ More
Submitted 23 March, 2001; originally announced March 2001.
Comments: LaTeX RevTeX 11 pages, 6 figures
Report number: SLAC-PUB-8753
Journal ref: Phys.Lett. A282 (2001) 309-318
-
Results on Plasma Focusing of High Energy Density Electron and Positron Beams
Abstract: We present results from the SLAC E-150 experiment on plasma focusing of high energy density electron and, for the first time, positron beams. We also discuss measurements on plasma lens-induced synchrotron radiation, longitudinal dynamics of plasma focusing, and laser- and beam-plasma interactions.
Submitted 18 August, 2000; originally announced August 2000.
Comments: LINAC 2000 paper No. THC13, Monterey, CA. Aug.21-25,2000, 3 pages, 2 figures
Report number: SLAC-PUB-8567
Journal ref: eConf C000821 (2000) THc13