-
Competing addition processes give distinct growth regimes in the assembly of 1D filaments
Authors:
Sk Ashif Akram,
Tyler Brown,
Stephen Whitelam,
Georg Meisl,
Tuomas P. J. Knowles,
Jeremy D. Schmit
Abstract:
We present a model to describe the concentration-dependent growth of protein filaments. Our model contains two states, a low entropy/high affinity ordered state and a high entropy/low affinity disordered state. Consistent with experiments, our model shows a diffusion-limited linear growth regime at low concentration, followed by a concentration independent plateau at intermediate concentrations, a…
▽ More
We present a model to describe the concentration-dependent growth of protein filaments. Our model contains two states, a low entropy/high affinity ordered state and a high entropy/low affinity disordered state. Consistent with experiments, our model shows a diffusion-limited linear growth regime at low concentration, followed by a concentration independent plateau at intermediate concentrations, and rapid disordered precipitation at the highest concentrations. We show that growth in the linear and plateau regions is the result of two processes that compete amid the rapid binding and unbinding of non-specific states. The first process is the addition of ordered molecules during the periods where the end of the filament is free of incorrectly bound molecules. The second process is the capture of defects, which occurs when consecutive ordered additions occur on top of incorrectly bound molecules. We show that a key molecular property is the probability that a diffusive collision results in a correctly bound state. Small values of this probability suppress the defect capture growth mode, resulting in a plateau in the growth rate when incorrectly bound molecules become common enough to poison ordered growth. We show that conditions that non-specifically suppress or enhance intermolecular interactions, such as the addition of depletants or osmolytes, have opposite effects on the growth rate in the linear and plateau regimes. In the linear regime stronger interactions promote growth by reducing dissolution events, but in the plateau regime stronger interactions inhibit growth by stabilizing incorrectly bound molecules.
△ Less
Submitted 15 August, 2024; v1 submitted 13 August, 2024;
originally announced August 2024.
-
Hamiltonian Dynamics of Saturated Elongation in Amyloid Fiber Formation
Authors:
Liu Hong,
Xizhou Liu,
Thomas C. T. Michaels,
Tuomas P. J. Knowles
Abstract:
Elongation is a fundament process in amyloid fiber growth, which is normally characterized by a linear relationship between the fiber elongation rate and the monomer concentration. However, in high concentration regions, a sub-linear dependence was often observed, which could be explained by a universal saturation mechanism. In this paper, we modeled the saturated elongation process through a Mich…
▽ More
Elongation is a fundament process in amyloid fiber growth, which is normally characterized by a linear relationship between the fiber elongation rate and the monomer concentration. However, in high concentration regions, a sub-linear dependence was often observed, which could be explained by a universal saturation mechanism. In this paper, we modeled the saturated elongation process through a Michaelis-Menten like mechanism, which is constituted by two sub-steps -- unspecific association and dissociation of a monomer with the fibril end, and subsequent conformational change of the associated monomer to fit itself to the fibrillar structure. Typical saturation concentrations were found to be $7-70μM$ for A$β$40, $α$-synuclein and etc. Furthermore, by using a novel Hamiltonian formulation, analytical solutions valid for both weak and strong saturated conditions were constructed and applied to the fibrillation kinetics of $α$-synuclein and silk fibroin.
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
Deformable and robust core-shell protein microcapsules templated by liquid-liquid phase separated microdroplets
Authors:
Yufan Xu,
Yi Shen,
Thomas C. T. Michaels,
Kevin N. Baumann,
Daniele Vigolo,
Quentin Peter,
Yuqian Lu,
Kadi L. Saar,
Dominic Vella,
Hongjia Zhu,
Bing Li,
He Yang,
Alexander P. M. Guttenplan,
Marc Rodriguez-Garcia,
David Klenerman,
Tuomas P. J. Knowles
Abstract:
Microcapsules are a key class of microscale materials with applications in areas ranging from personal care to biomedicine, and with increasing potential to act as extracellular matrix (ECM) models of hollow organs or tissues. Such capsules are conventionally generated from non-ECM materials including synthetic polymers. Here, we fabricated robust microcapsules with controllable shell thickness fr…
▽ More
Microcapsules are a key class of microscale materials with applications in areas ranging from personal care to biomedicine, and with increasing potential to act as extracellular matrix (ECM) models of hollow organs or tissues. Such capsules are conventionally generated from non-ECM materials including synthetic polymers. Here, we fabricated robust microcapsules with controllable shell thickness from physically- and enzymatically-crosslinked gelatin and achieved a core-shell architecture by exploiting a liquid-liquid phase separated aqueous dispersed phase system in a one-step microfluidic process. Microfluidic mechanical testing revealed that the mechanical robustness of thicker-shell capsules could be controlled through modulation of the shell thickness. Furthermore, the microcapsules demonstrated environmentally-responsive deformation, including buckling by osmosis and external mechanical forces. A sequential release of cargo species was obtained through the degradation of the capsules. Stability measurements showed the capsules were stable at 37 °C for more than two weeks. Finally, all-aqueous liquid-liquid phase separated and multiphase liquid-liquid phase separated systems were generated with the gel-sol transition of microgel precursors. These smart capsules are promising models of hollow biostructures, microscale drug carriers, and building blocks or compartments for active soft materials and robots.
△ Less
Submitted 24 May, 2021; v1 submitted 28 September, 2020;
originally announced September 2020.
-
Top-down proteomics on a microfluidic platform
Authors:
Yuewen Zhang,
Maya A. Wright,
Pavan K. Challa,
Kadi-Liis Saar,
Sean Devenish,
Quentin Peter,
Tuomas P. J. Knowles
Abstract:
Protein identification and profiling is critical for the advancement of cell and molecular biology as well as medical diagnostics. Although mass spectrometry and protein microarrays are commonly used for protein identification, both methods require extensive experimental steps and long data analysis times. Here we present a microfluidic top down proteomics platform giving multidimensional read out…
▽ More
Protein identification and profiling is critical for the advancement of cell and molecular biology as well as medical diagnostics. Although mass spectrometry and protein microarrays are commonly used for protein identification, both methods require extensive experimental steps and long data analysis times. Here we present a microfluidic top down proteomics platform giving multidimensional read outs of the essential amino acids of proteins. We obtain hydrodynamic radius and fluorescence signals relating to the content of tryptophans, tyrosines and lysines of proteins using a combination of diffusional sizing of proteins, label-free detection and on-chip labelling of proteins with a latent fluorophore in the solution phase. We thereby achieve identification of proteins on a single microfluidic chip by separating and mapping proteins in multidimensional space based on their characteristic physical parameters. Our results have significant implications in the development of easy and rapid platforms to use for native protein identification in clinical and laboratory settings.
△ Less
Submitted 25 October, 2019;
originally announced October 2019.
-
Reaction rate theory for supramolecular kinetics: application to protein aggregation
Authors:
Thomas C. T. Michaels,
Lucie X. Liu,
Samo Curk,
Peter G. Bolhuis,
Andela Saric,
Tuomas P. J. Knowles
Abstract:
Probing the reaction mechanisms of supramolecular processes in soft- and biological matter, such as protein aggregation, is inherently challenging. These processes emerge from the simultaneous action of multiple molecular mechanisms, each of which is associated with the rearrangement of a large number of weak bonds, resulting in a complex free energy landscape with many kinetic barriers. Reaction…
▽ More
Probing the reaction mechanisms of supramolecular processes in soft- and biological matter, such as protein aggregation, is inherently challenging. These processes emerge from the simultaneous action of multiple molecular mechanisms, each of which is associated with the rearrangement of a large number of weak bonds, resulting in a complex free energy landscape with many kinetic barriers. Reaction rate measurements of supramolecular processes at different temperatures can offer unprecedented insights into the underlying molecular mechanisms and their thermodynamic properties. However, to be able to interpret such measurements in terms of the underlying microscopic mechanisms, a key challenge is to establish which properties of the complex free energy landscapes are probed by the reaction rate. Here, we present a reaction rate theory for supramolecular kinetics based on Kramers rate theory for diffusive reactions over multiple kinetic barriers, and apply the results to protein aggregation. Using this framework and Monte Carlo simulations, we show that reaction rates for protein aggregation are of the Arrhenius-Eyring type and that the associated activation energies probe only one relevant barrier along the respective free energy landscapes. We apply this advancement to interpret, both in experiments and in coarse-grained computer simulations, reaction rate measurements of amyloid aggregation kinetics in terms of the underlying molecular mechanisms and associated thermodynamic signatures. Our results establish a general platform for probing the mechanisms and energetics of supramolecular phenomena in soft- and biological matter using the framework of chemical kinetics.
△ Less
Submitted 13 March, 2018;
originally announced March 2018.
-
DNA-coated Functional Oil Droplets
Authors:
Alessio Caciagli,
Mykolas Zupkauskas,
Aviad Levin,
Tuomas P. J. Knowles,
Clément Mugemana,
Nico Bruns,
Thomas O'Neill,
William J. Frith,
Erika Eiser
Abstract:
Many industrial soft materials often include oil-in-water (O/W) emulsions at the core of their formulations. By using tuneable interface stabilizing agents, such emulsions can self-assemble into complex structures. DNA has been used for decades as a thermoresponsive highly specific binding agent between hard and, recently, soft colloids. Up until now, emulsion droplets functionalized with DNA had…
▽ More
Many industrial soft materials often include oil-in-water (O/W) emulsions at the core of their formulations. By using tuneable interface stabilizing agents, such emulsions can self-assemble into complex structures. DNA has been used for decades as a thermoresponsive highly specific binding agent between hard and, recently, soft colloids. Up until now, emulsion droplets functionalized with DNA had relatively low coating densities and were expensive to scale up. Here a general O/W DNA-coating method using functional non-ionic amphiphilic block copolymers, both diblock and triblock, is presented. The hydrophilic polyethylene glycol ends of the surfactants are functionalized with azides, allowing for efficient, dense and controlled coupling of dibenzocyclooctane functionalized DNA to the polymers through a strain-promoted alkyne-azide click reaction. The protocol is readily scalable due to the triblock's commercial availability. Different production methods (ultrasonication, microfluidics and membrane emulsification) are used with different oils (hexadecane and silicone oil) to produce functional droplets in various size ranges (sub-micron, $\sim 20\,\mathrm{μm}$ and $> 50\,\mathrm{μm}$), showcasing the generality of the protocol. Thermoreversible sub-micron emulsion gels, hierarchical "raspberry" droplets and controlled droplet release from a flat DNA-coated surface are demonstrated. The emulsion stability and polydispersity is evaluated using dynamic light scattering and optical microscopy. The generality and simplicity of the method opens up new applications in soft matter and biotechnological research and industrial advances.
△ Less
Submitted 21 October, 2017;
originally announced October 2017.
-
Kinetics of spontaneous filament nucleation via oligomers: insights from theory and simulation
Authors:
Anđela Šarić,
Thomas C. T. Michaels,
Alessio Zaccone,
Tuomas P. J. Knowles,
Daan Frenkel
Abstract:
Nucleation processes are at the heart of a large number of phenomena, from cloud formation to protein crystallization. A recently emerging area where nucleation is highly relevant is the initiation of filamentous protein self-assembly, a process that has broad implications from medicine to nanotechnology. As such, spontaneous nucleation of protein fibrils has received much attention in recent year…
▽ More
Nucleation processes are at the heart of a large number of phenomena, from cloud formation to protein crystallization. A recently emerging area where nucleation is highly relevant is the initiation of filamentous protein self-assembly, a process that has broad implications from medicine to nanotechnology. As such, spontaneous nucleation of protein fibrils has received much attention in recent years with many theoretical and experimental studies focussing on the underlying physical principles. In this paper we make a step forward in this direction and explore the early time behaviour of filamentous protein growth in the context of nucleation theory. We first provide an overview of the thermodynamics and kinetics of spontaneous nucleation of protein filaments in the presence of one relevant degree of freedom, namely the cluster size. In this case, we review how key kinetic observables, such as the reaction order of spontaneous nucleation, are directly related to the physical size of the critical nucleus. We then focus on the increasingly prominent case of filament nucleation that includes a conformational conversion of the nucleating building-block as an additional slow step in the nucleation process. Using computer simulations, we study the concentration dependence of the nucleation rate. We find that, under these circumstances, the reaction order of spontaneous nucleation with respect to the free monomer does no longer relate to the overall physical size of the nucleating aggregate but rather to the portion of the aggregate that actively participates in the conformational conversion. Our results thus provide a novel interpretation of the common kinetic descriptors of protein filament formation, including the reaction order of the nucleation step or the scaling exponent of lag times, and put into perspective current theoretical descriptions of protein aggregation.
△ Less
Submitted 4 January, 2017; v1 submitted 7 October, 2016;
originally announced October 2016.
-
Intra-chain organisation of hydrophobic residues controls inter-chain aggregation rates of amphiphilic polymers
Authors:
Patrick Varilly,
Adam P. Willard,
Julius B. Kirkegaard,
Tuomas P. J. Knowles,
David Chandler
Abstract:
Aggregation of amphiphiles through the action of hydrophobic interactions is a common feature in soft condensed matter systems and is of particular importance in the context of biophysics as it underlies both the generation of functional biological machinery as well as the formation of pathological misassembled states of proteins. Here we explore the aggregation behaviour of amphiphilic polymers u…
▽ More
Aggregation of amphiphiles through the action of hydrophobic interactions is a common feature in soft condensed matter systems and is of particular importance in the context of biophysics as it underlies both the generation of functional biological machinery as well as the formation of pathological misassembled states of proteins. Here we explore the aggregation behaviour of amphiphilic polymers using lattice Monte-Carlo calculations and show that the distribution of hydrophobic residues within the polymer sequence determines the facility with which dry/wet interfaces can be created and that such interfaces drive the aggregation process.
△ Less
Submitted 1 October, 2016;
originally announced October 2016.
-
Kinetics of fragmentation and dissociation of two-strand protein filaments: Coarse-grained simulations and experiments
Authors:
A. Zaccone,
I. Terentjev,
T. W. Herling,
T. P. J. Knowles,
A. Aleksandrova,
E. M. Terentjev
Abstract:
While a significant body of investigations have been focused on the process of protein self-assembly, much less is understood about the reverse process of a filament breaking due to thermal motion into smaller fragments, or depolymerization of subunits from the filament ends. Indirect evidence for actin and amyloid filament fragmentation has been reported, although the phenomenon has never been di…
▽ More
While a significant body of investigations have been focused on the process of protein self-assembly, much less is understood about the reverse process of a filament breaking due to thermal motion into smaller fragments, or depolymerization of subunits from the filament ends. Indirect evidence for actin and amyloid filament fragmentation has been reported, although the phenomenon has never been directly observed either experimentally or in simulations. Here we report the direct observation of filament depolymerization and breakup in a minimal, calibrated model of coarse-grained molecular simulation. We quantify the orders of magnitude by which the depolymerization rate from the filament ends $k_\mathrm{off}$ is larger than fragmentation rate $k_{-}$ and establish the law $k_\mathrm{off}/k_- = \exp [( \varepsilon_\| - \varepsilon_\bot) / k_\mathrm{B}T ] = \exp [0.5 \varepsilon / k_\mathrm{B}T ]$, which accounts for the topology and energy of bonds holding the filament together. This mechanism and the order-of-magnitude predictions are well supported by direct experimental measurements of depolymerization of insulin amyloid filaments.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
A general reaction network unifies the aggregation behaviour of the A$β$42 peptide and its variants
Authors:
Georg Meisl,
Xiaoting Yang,
Christopher M. Dobson,
Sara Linse,
Tuomas P. J. Knowles
Abstract:
The amyloid $β$ peptide (A$β$42), whose aggregation is associated with Alzheimer's disease, is an amphiphatic peptide with a high propensity to self-assemble. A$β$42 has a net negative charge at physiological pH and modulations of intermolecular electrostatic interactions can significantly alter its aggregation behaviour. Variations in sequence and solution conditions lead to varied macroscopic be…
▽ More
The amyloid $β$ peptide (A$β$42), whose aggregation is associated with Alzheimer's disease, is an amphiphatic peptide with a high propensity to self-assemble. A$β$42 has a net negative charge at physiological pH and modulations of intermolecular electrostatic interactions can significantly alter its aggregation behaviour. Variations in sequence and solution conditions lead to varied macroscopic behaviour, often resulting in a number of different mechanistic explanations for the aggregation of these closely related systems. Here we alter the electrostatic interactions governing the fibril aggregation kinetics by varying the ionic strength over an order of magnitude, which allows us to sample the space of different reaction mechanisms, and develop a minimal reaction network that explains the experimental kinetics under all the different conditions. We find that an increase in the ionic strength leads to an increased rate of surface catalysed nucleation over fragmentation and eventually to a saturation of this nucleation process. More generally, this reaction network connects previously separate systems, such as mutants of A$β$42 and the wild type, on a continuous mechanistic landscape, thereby providing a unified picture of the aggregation mechanism of A$β$42 and the means of directly comparing the effects of intrinsic modifications of the peptide to those of simple electrostatic shielding.
△ Less
Submitted 4 April, 2016;
originally announced April 2016.
-
Particle-based simulations of steady-state mass transport at high Péclet numbers
Authors:
Thomas Müller,
Paolo Arosio,
Luke Rajah,
Samuel I. A. Cohen,
Emma V. Yates,
Michele Vendruscolo,
Chrisopher M. Dobson,
Tuomas P. J. Knowles
Abstract:
Conventional approaches for simulating steady-state distributions of particles under diffusive and advective transport at high Péclet numbers involve solving the diffusion and advection equations in at least two dimensions. Here, we present an alternative computational strategy by combining a particle-based rather than a field-based approach with the initialisation of particles in proportion to th…
▽ More
Conventional approaches for simulating steady-state distributions of particles under diffusive and advective transport at high Péclet numbers involve solving the diffusion and advection equations in at least two dimensions. Here, we present an alternative computational strategy by combining a particle-based rather than a field-based approach with the initialisation of particles in proportion to their flux. This method allows accurate prediction of the steady state and is applicable even at high Péclet numbers where traditional particle-based Monte-Carlo methods starting from randomly initialised particle distributions fail. We demonstrate that generating a flux of particles according to a predetermined density and velocity distribution at a single fixed time and initial location allows for accurate simulation of mass transport under flow. Specifically, upon initialisation in proportion to their flux, these particles are propagated individually and detected by summing up their Monte-Carlo trajectories in predefined detection regions. We demonstrate quantitative agreement of the predicted concentration profiles with the results of experiments performed with fluorescent particles in microfluidic channels under continuous flow. This approach is computationally advantageous and readily allows non-trivial initial distributions to be considered. In particular, this method is highly suitable for simulating advective and diffusive transport in microfluidic devices.
△ Less
Submitted 17 October, 2015;
originally announced October 2015.
-
Oligomers of heat-shock proteins: Structures that don't imply function
Authors:
William M. Jacobs,
Tuomas P. J. Knowles,
Daan Frenkel
Abstract:
Most proteins must remain soluble in the cytosol in order to perform their biological functions. To protect against undesired protein aggregation, living cells maintain a population of molecular chaperones that ensure the solubility of the proteome. Here we report simulations of a lattice model of interacting proteins to understand how low concentrations of passive molecular chaperones, such as sm…
▽ More
Most proteins must remain soluble in the cytosol in order to perform their biological functions. To protect against undesired protein aggregation, living cells maintain a population of molecular chaperones that ensure the solubility of the proteome. Here we report simulations of a lattice model of interacting proteins to understand how low concentrations of passive molecular chaperones, such as small heat-shock proteins, suppress thermodynamic instabilities in protein solutions. Given fixed concentrations of chaperones and client proteins, the solubility of the proteome can be increased by tuning the chaperone--client binding strength. Surprisingly, we find that the binding strength that optimizes solubility while preventing irreversible chaperone binding also promotes the formation of weakly bound chaperone oligomers, although the presence of these oligomers does not significantly affect the thermodynamic stability of the solution. Such oligomers are commonly observed in experiments on small heat-shock proteins, but their connection to the biological function of these chaperones has remained unclear. Our simulations suggest that this clustering may not have any essential biological function, but rather emerges as a natural side-effect of optimizing the thermodynamic stability of the proteome.
△ Less
Submitted 12 February, 2016; v1 submitted 31 August, 2015;
originally announced August 2015.
-
Crucial role of non-specific interactions in amyloid nucleation
Authors:
Anđela Šarić,
Yassmine C. Chebaro,
Tuomas P. J. Knowles,
Daan Frenkel
Abstract:
Protein oligomers have been implicated as toxic agents in a wide range of amyloid-related diseases. Yet it has remained unsolved whether the oligomers are a necessary step in the formation of amyloid fibrils, or just a dangerous by-product. Analogously, it has not been resolved if the amyloid nucleation process is a classical one-step nucleation process, or a two-step process involving pre-nucleat…
▽ More
Protein oligomers have been implicated as toxic agents in a wide range of amyloid-related diseases. Yet it has remained unsolved whether the oligomers are a necessary step in the formation of amyloid fibrils, or just a dangerous by-product. Analogously, it has not been resolved if the amyloid nucleation process is a classical one-step nucleation process, or a two-step process involving pre-nucleation clusters. We use coarse-grained computer simulations to study the effect of non-specific attractions between peptides on the primary nucleation process underlying amyloid fibrillization. We find that for peptides that do not attract, the classical one-step nucleation mechanism is possible, but only at non-physiologically high peptide concentrations. At low peptide concentrations, which mimic the physiologically relevant regime, attractive inter-peptide interactions are essential for fibril formation. Nucleation then inevitably takes place through a two-step mechanism involving prefibrillar oligomers. We show that oligomers not only help peptides meet each other, but create an environment that facilitates the conversion of monomers into the $β$-sheet rich form characteristic of fibrils. Nucleation typically does not proceed via the most prevalent oligomers, but via an oligomer size that is only observed in rare fluctuations, which is why such aggregates might be hard to capture experimentally. Finally, we find that the nucleation of amyloid fibrils cannot be described by classical nucleation theory: in the two-step mechanism the critical nucleus size increases both with an increase in concentration and in the inter-peptide interactions, in direct contrast with predictions from classical nucleation theory.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
-
A High Power-Density Mediator-Free Microfluidic Biophotovoltaic Device for Cyanobacterial Cells
Authors:
Paolo Bombelli,
Thomas Müller,
Therese W. Herling,
Christopher J. Howe,
Tuomas P. J. Knowles
Abstract:
Biophotovoltaics has emerged as a promising technology for generating renewable energy since it relies on living organisms as inexpensive, self-repairing and readily available catalysts to produce electricity from an abundant resource - sunlight. The efficiency of biophotovoltaic cells, however, has remained significantly lower than that achievable through synthetic materials. Here, we devise a pl…
▽ More
Biophotovoltaics has emerged as a promising technology for generating renewable energy since it relies on living organisms as inexpensive, self-repairing and readily available catalysts to produce electricity from an abundant resource - sunlight. The efficiency of biophotovoltaic cells, however, has remained significantly lower than that achievable through synthetic materials. Here, we devise a platform to harness the large power densities afforded by miniaturised geometries. To this effect, we have developed a soft-lithography approach for the fabrication of microfluidic biophotovoltaic devices that do not require membranes or mediators. Synechocystis sp. PCC 6803 cells were injected and allowed to settle on the anode, permitting the physical proximity between cells and electrode required for mediator-free operation. We demonstrate power densities of above 100 mW/m2 for a chlorophyll concentration of 100 μM under white light, a high value for biophotovoltaic devices without extrinsic supply of additional energy.
△ Less
Submitted 21 November, 2014;
originally announced November 2014.
-
Dry-Mass Sensing for Microfluidics
Authors:
T. Müller,
D. A. White,
T. P. J. Knowles
Abstract:
We present an approach for interfacing an electromechanical sensor with a microfluidic device for the accurate quantification of the dry mass of analytes within microchannels. We show that depositing solutes onto the active surface of a quartz crystal microbalance by means of an on-chip microfluidic spray nozzle and subsequent solvent removal provides the basis for the real-time determination of d…
▽ More
We present an approach for interfacing an electromechanical sensor with a microfluidic device for the accurate quantification of the dry mass of analytes within microchannels. We show that depositing solutes onto the active surface of a quartz crystal microbalance by means of an on-chip microfluidic spray nozzle and subsequent solvent removal provides the basis for the real-time determination of dry solute mass. Moreover, this detection scheme does not suffer from the decrease in the sensor quality factor and the viscous drag present if the measurement is performed in a liquid environment, yet allows solutions to be analysed. We demonstrate the sensitivity and reliability of our approach by controlled deposition of nanogram levels of salt and protein from a micrometer-sized channel.
△ Less
Submitted 19 November, 2014;
originally announced November 2014.
-
Nanoscale spatially resolved infrared spectra from single microdroplets
Authors:
Thomas Müller,
Francesco Simone Ruggeri,
Andrzej J. Kulik,
Ulyana Shimanovich,
Thomas O. Mason,
Tuomas P. J. Knowles,
Giovanni Dietler
Abstract:
Droplet microfluidics has emerged as a powerful platform allowing a large number of individual reactions to be carried out in spatially distinct microcompartments. Due to their small size, however, the spectroscopic characterisation of species encapsulated in such systems remains challenging. In this paper, we demonstrate the acquisition of infrared spectra from single microdroplets containing agg…
▽ More
Droplet microfluidics has emerged as a powerful platform allowing a large number of individual reactions to be carried out in spatially distinct microcompartments. Due to their small size, however, the spectroscopic characterisation of species encapsulated in such systems remains challenging. In this paper, we demonstrate the acquisition of infrared spectra from single microdroplets containing aggregation-prone proteins. To this effect, droplets are generated in a microfluidic flow-focussing device and subsequently deposited in a square array onto a ZnSe prism using a micro stamp. After drying, the solutes present in the droplets are illuminated locally by an infrared laser through the prism, and their thermal expansion upon absorption of infrared radiation is measured with an atomic force microscopy tip, granting nanoscale resolution. Using this approach, we resolve structural differences in the amide bands of the spectra of monomeric and aggregated lysozyme from single microdroplets with picolitre volume.
△ Less
Submitted 31 January, 2014;
originally announced January 2014.
-
Integration and characterization of solid wall electrodes in microfluidic devices fabricated in a single photolithography step
Authors:
T. W. Herling,
T. Müller,
L. Rajah,
J. N. Skepper,
M. Vendruscolo,
T. P. J. Knowles
Abstract:
We describe the fabrication and characterization of solid 3-dimensional electrodes in direct contact with microfluidic channels, implemented using a single photolithography step, allowing operation in high-dielectric constant media. Incorporation and self-alignment of electrodes is achieved by combining microsolidic approaches with exploitation of the surface tension of low melting point alloys. T…
▽ More
We describe the fabrication and characterization of solid 3-dimensional electrodes in direct contact with microfluidic channels, implemented using a single photolithography step, allowing operation in high-dielectric constant media. Incorporation and self-alignment of electrodes is achieved by combining microsolidic approaches with exploitation of the surface tension of low melting point alloys. Thus the metal forms the walls flanking the channel. We show that this approach yields electrodes with a well-defined, reproducible morphology and stable electronic properties when in contact with biochemical buffers. By combining calibration of the electric field with free-flow electrophoresis we quantify the net solvated charges of small molecules.
△ Less
Submitted 15 May, 2013;
originally announced May 2013.
-
Nucleated polymerisation in the presence of pre-formed seed filaments
Authors:
Samuel I. A. Cohen,
Michele Vendruscolo,
Christopher M. Dobson,
Tuomas P. J. Knowles
Abstract:
We revisit the classical problem of nucleated polymerisation and derive a range of exact results describing polymerisation in systems intermediate between the well-known limiting cases of a reaction starting from purely soluble material and for a reaction where no new growth nuclei are formed.
We revisit the classical problem of nucleated polymerisation and derive a range of exact results describing polymerisation in systems intermediate between the well-known limiting cases of a reaction starting from purely soluble material and for a reaction where no new growth nuclei are formed.
△ Less
Submitted 7 July, 2011;
originally announced July 2011.
-
Strength of nanotubes, filaments and nanowires from sonication-induced scission
Authors:
Y. Y. Huang,
T. P. J. Knowles,
E. M. Terentjev
Abstract:
We propose a simple model to describe the cavitation-induced breakage of mesoscale filaments during their sonication in solution. The model predicts a limiting length below which scission no longer occurs. This characteristic length is a function of the tensile strength and diameter of the filament, as well as the solvent viscosity and cavitation parameters. We show that the model predicts accur…
▽ More
We propose a simple model to describe the cavitation-induced breakage of mesoscale filaments during their sonication in solution. The model predicts a limiting length below which scission no longer occurs. This characteristic length is a function of the tensile strength and diameter of the filament, as well as the solvent viscosity and cavitation parameters. We show that the model predicts accurately experimental results for materials ranging from carbon nanotubes to protein fibrils, and discuss the use of sonication-induced breakage as a probe for the strength of nanostructures.
△ Less
Submitted 17 July, 2009;
originally announced July 2009.