-
Experimental analysis of the TRC benchmark system
Authors:
Arati Bhattu,
Svenja Hermann,
Nidhal Jamia,
Florian Müller,
Maren Scheel,
Christoph Schwingshackl,
H. Nevzat Özgüven,
Malte Krack
Abstract:
The Tribomechadynamics Research Challenge (TRC) was a blind prediction of the vibration behavior of a thin plate clamped on two sides using bolted joints. The first bending mode's natural frequency and damping ratio were requested as function of the amplitude, starting from the linear regime until high levels, where both frictional contact and nonlinear bending-stretching coupling become relevant.…
▽ More
The Tribomechadynamics Research Challenge (TRC) was a blind prediction of the vibration behavior of a thin plate clamped on two sides using bolted joints. The first bending mode's natural frequency and damping ratio were requested as function of the amplitude, starting from the linear regime until high levels, where both frictional contact and nonlinear bending-stretching coupling become relevant. The predictions were confronted with experimental results in a companion paper; the present article addresses the experimental analysis of this benchmark system. Amplitude-dependent modal data was obtained from phase resonance and response controlled tests. An original variant of response controlled testing is proposed: Instead of a fixed frequency interval, a fixed phase interval is analyzed. This way, the high excitation levels required outside resonance, which could activate unwanted exciter nonlinearity, are avoided. Consistency of testing methods is carefully analyzed. Overall, these measures have permitted to gain high confidence in the acquired modal data. The different sources of the remaining uncertainty were further analyzed. A low reassembly-variability but a moderate time-variability were identified, where the latter is attributed to some thermal sensitivity of the system. Two nominally identical plates were analyzed, which both have an appreciable initial curvature, and a significant effect on the vibration behavior was found depending on whether the plate is aligned/misaligned with the support structure. Further, a 1:2 nonlinear modal interaction with the first torsion mode was observed, which only occurs in the aligned configurations.
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
On the locomotion of the slider within a self-adaptive beam-slider system
Authors:
Florian Müller,
Malte Krack
Abstract:
A beam-slider system is considered whose passive self-adaption relies on an intricate locomotion process involving both frictional and unilateral contact. The system also exploits geometric nonlinearity to achieve broadband efficacy. The dynamics of the system take place on three distinct time scales: On the fast time scale of the harmonic base excitation are the vibrations and the locomotion cycl…
▽ More
A beam-slider system is considered whose passive self-adaption relies on an intricate locomotion process involving both frictional and unilateral contact. The system also exploits geometric nonlinearity to achieve broadband efficacy. The dynamics of the system take place on three distinct time scales: On the fast time scale of the harmonic base excitation are the vibrations and the locomotion cycle. On the slow time scale, the slider changes its position along the beam, and the overall vibration level varies. Finally, on an intermediate time scale, strong modulations of the vibration amplitude may take place. In the present work, first, an analytical approximation of the beam's response on the slow time scale is derived as function of the slider position, which is a crucial prerequisite for identifying the main drivers of the slider's locomotion. Then, the most important forms of locomotion are described and approximations of their individual contribution to the overall slider transport are estimated. Finally, the theoretical results are compared against numerical results obtained from an experimentally validated model.
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
Robust and fast backbone tracking via phase-locked loops
Authors:
Patrick Hippold,
Maren Scheel,
Ludovic Renson,
Malte Krack
Abstract:
Phase-locked loops are commonly used for shaker-based backbone tracking of nonlinear structures. The state of the art is to tune the control parameters by trial and error. In the present work, an approach is proposed to make backbone tracking much more robust and faster. A simple PI controller is proposed, and closed-form expressions for the gains are provided that lead to an optimal settling of t…
▽ More
Phase-locked loops are commonly used for shaker-based backbone tracking of nonlinear structures. The state of the art is to tune the control parameters by trial and error. In the present work, an approach is proposed to make backbone tracking much more robust and faster. A simple PI controller is proposed, and closed-form expressions for the gains are provided that lead to an optimal settling of the phase transient. The required input parameters are obtained from a conventional shaker-based linear modal test, and an open-loop sine test at a single frequency and level. For phase detection, an adaptive filter based on the LMS algorithm is used, which is shown to be superior to the synchronous demodulation commonly used. Once the phase has locked, one can directly take the next step along the backbone, eliminating the hold times. The latter are currently used for recording the steady state, and to estimate Fourier coefficients in the post-process, which becomes unnecessary since the adaptive filter yields a highly accurate estimation at runtime.The excellent performance of the proposed approach is demonstrated for a doubly clamped beam undergoing bending-stretching coupling leading to a 20 percent shift of the lowest modal frequency. Even for fixed control parameters, designed for the linear regime, only about 100 periods are needed per backbone point, also in the nonlinear regime. This is much faster than what has been reported in the literature so far.
△ Less
Submitted 28 June, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
Fully Coupled Forced Response Analysis of Nonlinear Turbine Blade Vibrations in the Frequency Domain
Authors:
Christian Berthold,
Johann Gross,
Christian Frey,
Malte Krack
Abstract:
For the first time, a fully-coupled Harmonic Balance method is developed for the forced response of turbomachinery blades. The method is applied to a state-of-the-art model of a turbine bladed disk with interlocked shrouds subjected to wake-induced loading. The recurrent opening and closing of the pre-loaded shroud contact causes a softening effect, leading to turning points in the amplitude-frequ…
▽ More
For the first time, a fully-coupled Harmonic Balance method is developed for the forced response of turbomachinery blades. The method is applied to a state-of-the-art model of a turbine bladed disk with interlocked shrouds subjected to wake-induced loading. The recurrent opening and closing of the pre-loaded shroud contact causes a softening effect, leading to turning points in the amplitude-frequency curve near resonance. Therefore, the coupled solver is embedded into a numerical path continuation framework. Two variants are developed: the coupled continuation of the solution path, and the coupled re-iteration of selected solution points. While the re-iteration variant is slightly more costly per solution point, it has the important advantage that it can be run completely in parallel, which substantially reduces the wall clock time. It is shown that wake- and vibration-induced flow fields do not linearly superimpose, leading to a severe underestimation of the resonant vibration level by the influence-coefficient-based state-of-the-art methods (which rely on this linearity assumption).
△ Less
Submitted 14 July, 2023;
originally announced July 2023.
-
Unraveling the interlayer and intralayer coupling in two-dimensional layered MoS$_2$ by X-ray absorption spectroscopy and ab initio molecular dynamics simulations
Authors:
Inga Pudza,
Dmitry Bocharov,
Andris Anspoks,
Matthias Krack,
Aleksandr Kalinko,
Edmund Welter,
Alexei Kuzmin
Abstract:
Understanding interlayer and intralayer coupling in two-dimensional layered materials (2DLMs) has fundamental and technological importance for their large-scale production, engineering heterostructures, and development of flexible and transparent electronics. At the same time, the quantification of weak interlayer interactions in 2DMLs is a challenging task, especially, from the experimental point…
▽ More
Understanding interlayer and intralayer coupling in two-dimensional layered materials (2DLMs) has fundamental and technological importance for their large-scale production, engineering heterostructures, and development of flexible and transparent electronics. At the same time, the quantification of weak interlayer interactions in 2DMLs is a challenging task, especially, from the experimental point of view. Herein, we demonstrate that the use of X-ray absorption spectroscopy in combination with reverse Monte Carlo (RMC) and ab initio molecular dynamics (AIMD) simulations can provide useful information on both interlayer and intralayer coupling in 2DLM 2H$_c$-MoS$_2$. The analysis of the low-temperature (10-300 K) Mo K-edge extended X-ray absorption fine structure (EXAFS) using RMC simulations allows for obtaining information on the means-squared relative displacements $σ^2$ for nearest and distant Mo-S and Mo-Mo atom pairs. This information allowed us further to determine the strength of the interlayer and intralayer interactions in terms of the characteristic Einstein frequencies $ω_E$ and the effective force constants $κ$ for the nearest ten coordination shells around molybdenum. The studied temperature range was extended up to 1200 K employing AIMD simulations which were validated at 300 K using the EXAFS data. Both RMC and AIMD results provide evidence of the reduction of correlation in thermal motion between distant atoms and suggest strong anisotropy of atom thermal vibrations within the plane of the layers and in the orthogonal direction.
△ Less
Submitted 2 June, 2023;
originally announced June 2023.
-
How to verify the precision of density-functional-theory implementations via reproducible and universal workflows
Authors:
Emanuele Bosoni,
Louis Beal,
Marnik Bercx,
Peter Blaha,
Stefan Blügel,
Jens Bröder,
Martin Callsen,
Stefaan Cottenier,
Augustin Degomme,
Vladimir Dikan,
Kristjan Eimre,
Espen Flage-Larsen,
Marco Fornari,
Alberto Garcia,
Luigi Genovese,
Matteo Giantomassi,
Sebastiaan P. Huber,
Henning Janssen,
Georg Kastlunger,
Matthias Krack,
Georg Kresse,
Thomas D. Kühne,
Kurt Lejaeghere,
Georg K. H. Madsen,
Martijn Marsman
, et al. (20 additional authors not shown)
Abstract:
In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a firs…
▽ More
In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a first crucial step to evaluate the reliability of such computations. We discuss here general recommendations for verification studies aiming at further testing precision and transferability of density-functional-theory computational approaches and codes. We illustrate such recommendations using a greatly expanded protocol covering the whole periodic table from Z=1 to 96 and characterizing 10 prototypical cubic compounds for each element: 4 unaries and 6 oxides, spanning a wide range of coordination numbers and oxidation states. The primary outcome is a reference dataset of 960 equations of state cross-checked between two all-electron codes, then used to verify and improve nine pseudopotential-based approaches. Such effort is facilitated by deploying AiiDA common workflows that perform automatic input parameter selection, provide identical input/output interfaces across codes, and ensure full reproducibility. Finally, we discuss the extent to which the current results for total energies can be reused for different goals (e.g., obtaining formation energies).
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Are Chebyshev-based stability analysis and Urabe's error bound useful features for Harmonic Balance?
Authors:
Lukas Woiwode,
Malte Krack
Abstract:
Harmonic Balance is one of the most popular methods for computing periodic solutions of nonlinear dynamical systems. In this work, we address two of its major shortcomings: First, we investigate to what extent the computational burden of stability analysis can be reduced by consistent use of Chebyshev polynomials. Second, we address the problem of a rigorous error bound, which, to the authors' kno…
▽ More
Harmonic Balance is one of the most popular methods for computing periodic solutions of nonlinear dynamical systems. In this work, we address two of its major shortcomings: First, we investigate to what extent the computational burden of stability analysis can be reduced by consistent use of Chebyshev polynomials. Second, we address the problem of a rigorous error bound, which, to the authors' knowledge, has been ignored in all engineering applications so far. Here, we rely on Urabe's error bound and, again, use Chebyshev polynomials for the computationally involved operations. We use the error estimate to automatically adjust the harmonic truncation order during numerical continuation, and confront the algorithm with a state-of-the-art adaptive Harmonic Balance implementation. Further, we rigorously prove, for the first time, the existence of some isolated periodic solutions of the forced-damped Duffing oscillator with softening characteristic. We find that the effort for obtaining a rigorous error bound, in its present form, may be too high to be useful for many engineering problems. Based on the results obtained for a sequence of numerical examples, we conclude that Chebyshev-based stability analysis indeed permits a substantial speedup. Like Harmonic Balance itself, however, this method becomes inefficient when an extremely high truncation order is needed as, e.g., in the presence of (sharply regularized) discontinuities.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
Experimental validation of a model for a self-adaptive beam-slider system
Authors:
Florian Müller,
Maximilian Beck,
Malte Krack
Abstract:
A system consisting of a doubly clamped beam with an attached body (slider) free to move along the beam has been studied recently by multiple research groups. Under harmonic base excitation, the system has the capacity to passively adapt itself (by slowly changing the slider position) to yield either high or low vibrations. The central contributions of this work are the refinement of the recently…
▽ More
A system consisting of a doubly clamped beam with an attached body (slider) free to move along the beam has been studied recently by multiple research groups. Under harmonic base excitation, the system has the capacity to passively adapt itself (by slowly changing the slider position) to yield either high or low vibrations. The central contributions of this work are the refinement of the recently developed system model with regard to the finite stiffness of the beam's clamping, followed by a thorough validation of this model against experimental results. With the intent to achieve repeatable and robust self-adaption, a new prototype of the system was designed, featuring, in particular, a continuously adjustable gap size and a concave inner contact geometry. The initial beam model is updated based on the results of an Experimental Nonlinear Modal Analysis of the system (without slider). By varying the excitation level and frequency in a wide range, all known types of behavior were reproduced in the experiment. The simulation results of the updated model with slider are in excellent agreement with the measurements, both qualitatively (type of behavior) and quantitatively. Minor deviations are attributed to the system's sensitivity to inevitable uncertainties, in particular with regard to the friction coefficient and the linear natural frequency. It is thus concluded that the proposed model is well-suited for further analysis of its intriguing dynamics and for model-based optimization for technical applications such as energy harvesting.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Computational and experimental analysis of the impact of a sphere on a beam and the resulting modal energy distribution
Authors:
Felix Gehr,
Timo Theurich,
Carlo Monjaraz-Tec,
Johann Gross,
Stefan Schwarz,
Andreas Hartung,
Malte Krack
Abstract:
We consider the common problem setting of an elastic sphere impacting on a flexible beam. In contrast to previous studies, we analyze the modal energy distribution induced by the impact, having in mind the particular application of impact vibration absorbers. Also, the beam is analyzed in the clamped-clamped configuration, in addition to the free-free configuration usually considered. We demonstra…
▽ More
We consider the common problem setting of an elastic sphere impacting on a flexible beam. In contrast to previous studies, we analyze the modal energy distribution induced by the impact, having in mind the particular application of impact vibration absorbers. Also, the beam is analyzed in the clamped-clamped configuration, in addition to the free-free configuration usually considered. We demonstrate that the designed test rig permits to obtain well-repeatable measurements. The measurements are confronted with predictions obtained using two different approaches, state-of-the-art Finite Element Analysis and a recently developed computational approach involving a reduced-order model. The innovative aspect of the latter approach is to achieve a massless contact boundary using component mode synthesis, which reduces the mathematical model order and numerical oscillations. We show that the novel computational approach reduces the numerical effort by 3-4 orders of magnitude compared to state-of-the-art Finite Element Analysis, without compromising the excellent agreement with the measurements.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
Prediction and validation of the strongly modulated forced response of two beams undergoing frictional impacts
Authors:
Carlo Monjaraz-Tec,
Lukas Kohlmann,
Stefan Schwarz,
Andreas Hartung,
Johann Gross,
Malte Krack
Abstract:
We consider two cantilevered beams undergoing frictional impacts at the free end. The beams are designed to be of similar geometry so that they have distinct but close natural frequencies. Under harmonic base excitation near the primary resonance with the higher-frequency fundamental bending mode, the system shows a strongly modulated non-periodic response. The purpose of this work is to analyze t…
▽ More
We consider two cantilevered beams undergoing frictional impacts at the free end. The beams are designed to be of similar geometry so that they have distinct but close natural frequencies. Under harmonic base excitation near the primary resonance with the higher-frequency fundamental bending mode, the system shows a strongly modulated non-periodic response. The purpose of this work is to analyze to what extent the non-periodic vibro-impact dynamics can be predicted. To this end, we use a recently developed modeling and simulation approach. The approach relies on component mode synthesis, the massless boundary concept and an appropriate time stepping scheme. Unilateral contact and dry friction are modeled as set-valued laws and imposed locally within the spatially resolved contact area. A linear model updating is carried out based on the natural frequencies and damping ratios identified in the regime without impacts. The nonlinear simulation of the steady-state response to forward and backward stepped sine excitation is compared against measurements. The results are in very good agreement, especially in the light of the uncertainty associated with the observed material loss in the contact region and the nonlinear behavior of the clamping.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
Nonlinear damping quantification from phase-resonant tests under base excitation
Authors:
Florien Müller,
Lukas Woiwode,
Johann Gross,
Maren Scheel,
Malte Krack
Abstract:
The present work addresses the experimental identification of amplitude-dependent modal parameters (modal frequency, damping ratio, Fourier coefficients of periodic modal oscillation). Phase-resonant testing has emerged as an important method for this task, as it substantially reduces the amount of data required for the identification compared to conventional frequency-response testing at differen…
▽ More
The present work addresses the experimental identification of amplitude-dependent modal parameters (modal frequency, damping ratio, Fourier coefficients of periodic modal oscillation). Phase-resonant testing has emerged as an important method for this task, as it substantially reduces the amount of data required for the identification compared to conventional frequency-response testing at different excitation/response levels. In the case of shaker-stinger excitation, the applied excitation force is commonly measured in order to quantify the amplitude-dependent modal damping ratio from the phase-resonant test data. In the case of base excitation, however, the applied excitation force is challenging or impossible to measure. In this work we develop an original method for damping quantification from phase-resonant tests. It relies solely on response measurement; it avoids the need to resort to force measurement. The key idea is to estimate the power provided by the distributed inertia force imposed by the base motion. We develop both a model-free and a model-based variant of the method. We validate the developed method first in virtual experiments of a friction-damped and a geometrically nonlinear system, and then in a physical experiment involving a thin beam clamped at both ends via bolted joints. We conclude that the method is highly robust and provides high accuracy already for a reasonable number of sensors.
△ Less
Submitted 10 May, 2022;
originally announced May 2022.
-
A massless boundary component mode synthesis method for elastodynamic contact problems
Authors:
Carlo Monjaraz-Tec,
Johann Gross,
Malte Krack
Abstract:
We propose to combine the ideas of mass redistribution and component mode synthesis. More specifically, we employ the MacNeal method, which readily leads to a singular mass matrix, and an accordingly modified version of the Craig-Bampton method. Besides obtaining a massless boundary, we achieve a drastic reduction of the mathematical model order in this way compared to the parent finite element mo…
▽ More
We propose to combine the ideas of mass redistribution and component mode synthesis. More specifically, we employ the MacNeal method, which readily leads to a singular mass matrix, and an accordingly modified version of the Craig-Bampton method. Besides obtaining a massless boundary, we achieve a drastic reduction of the mathematical model order in this way compared to the parent finite element model. Contact is modeled using set-valued laws and time stepping is carried out with a semi-explicit scheme. We assess the method's computational performance by a series of benchmarks, including both frictionless and frictional contact. The results indicate that the proposed method achieves excellent energy conservation properties and superior convergence behavior. It reduces the spurious oscillations and decreases the computational effort by about 1-2 orders of magnitude compared to the current state of the art (mass-carrying component mode synthesis method). We believe that the computational performance and favorable energy conservation properties will be valuable for the prediction of vibro-impact processes and physical damping.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
Predictive design of impact absorbers for mitigating resonances of flexible structures using a semi-analytical approach
Authors:
Timo Theurich,
Alexander F. Vakakis,
Malte Krack
Abstract:
Analytical conditions are available for the optimum design of impact absorbers for the case where the host structure is well described as rigid body. Accordingly, the analysis relies on the assumption that the impacts cause immediate dissipation in the contact region, which is modeled in terms of a known coefficient of restitution. When a flexible host structure is considered instead, the impact a…
▽ More
Analytical conditions are available for the optimum design of impact absorbers for the case where the host structure is well described as rigid body. Accordingly, the analysis relies on the assumption that the impacts cause immediate dissipation in the contact region, which is modeled in terms of a known coefficient of restitution. When a flexible host structure is considered instead, the impact absorber not only dissipates energy at the time instances of impact, but it inflicts nonlinear energy scattering between structural modes. Hence, it is crucial to account for such nonlinear energy transfers yielding energy redistribution within the modal space of the structure. In the present work, we develop a design approach for reonantly-driven, flexible host structures. We demonstrate decoupling of the time scales of the impact and the resonant vibration. On the long time scale, the dynamics can be properly reduced to the fundamental harmonic of the resonant mode. A light impact absorber responds to this enforced motion, and we recover the Slow Invariant Manifold of the dynamics for the regime of two impacts per period. On the short time scale, the contact mechanics and elasto-dynamics must be finely resolved. We show that it is sufficient to run a numerical simulation of a single impact event with adequate pre-impact velocity. From this simulation, we derive a modal coefficient of restitution and the properties of the contact force pulse, needed to approximate the behavior on the long time scale. We establish that the design problem can be reduced to four dimensionless parameters and demonstrate the approach for the numerical example of a cantilevered beam with an impact absorber. We conclude that the proposed semi-analytical procedure enables deep qualitative understanding of the problem and, at the same time, yields a quantitatively accurate prediction of the optimum design.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Extension of the single-nonlinear-mode theory by linear attachments and application to exciter-structure interaction
Authors:
Malte Krack
Abstract:
Under certain conditions, the dynamics of a nonlinear mechanical system can be represented by a single nonlinear modal oscillator. The properties of the modal oscillator can be determined by computational or experimental nonlinear modal analysis. The simplification to a single-nonlinear-mode model facilitates qualitative and global analysis, and substantially reduces the computational effort requi…
▽ More
Under certain conditions, the dynamics of a nonlinear mechanical system can be represented by a single nonlinear modal oscillator. The properties of the modal oscillator can be determined by computational or experimental nonlinear modal analysis. The simplification to a single-nonlinear-mode model facilitates qualitative and global analysis, and substantially reduces the computational effort required for probabilistic methods and design optimization. Important limitations of this theory are that only purely mechanical systems can be analyzed and that the respective nonlinear mode has to be recomputed when the system's structural properties are varied. With the theoretical extension proposed in this work, it becomes feasible to attach linear subsystems to the primary mechanical system, and to approximate the dynamics of this coupled system using only the nonlinear mode of the primary mechanical system. The attachments must be described by linear ordinary or differential-algebraic equations with time-invariant coefficient matrices. The attachments do not need to be of purely mechanical nature, but may contain, for instance, electric, magnetic, acoustic, thermal or aerodynamic models. This considerably extends the range of utility of nonlinear modes to applications as diverse as model updating or vibration energy harvesting. As long as the attachments do not significantly deteriorate the host system's modal deflection shape, it is shown that their effect can be reduced to a complex-valued modal impedance and an imposed modal forcing term. In the present work, the proposed approach is computationally assessed for the analysis of exciter-structure interaction. More specifically, the force drop typically encountered in frequency response testing is revisited.
△ Less
Submitted 6 May, 2021;
originally announced May 2021.
-
Development of a Fully-Coupled Harmonic Balance Method and a Refined Energy Method for the Computation of Flutter-Induced Limit Cycle Oscillations of Bladed Disks with Nonlinear Friction Contacts
Authors:
Christian Berthold,
Johann Gross,
Christian Frey,
Malte Krack
Abstract:
Flutter stability is a dominant design constraint of modern gas and steam turbines. To further increase the feasible design space, flutter-tolerant designs are currently explored, which may undergo Limit Cycle Oscillations (LCOs) of acceptable, yet not vanishing, level. Bounded self-excited oscillations are a priori a nonlinear phenomenon, and can thus only be explained by nonlinear interactions s…
▽ More
Flutter stability is a dominant design constraint of modern gas and steam turbines. To further increase the feasible design space, flutter-tolerant designs are currently explored, which may undergo Limit Cycle Oscillations (LCOs) of acceptable, yet not vanishing, level. Bounded self-excited oscillations are a priori a nonlinear phenomenon, and can thus only be explained by nonlinear interactions such as dry stick-slip friction in mechanical joints. The currently available simulation methods for blade flutter account for nonlinear interactions, at most, in only one domain, the structure or the fluid, and assume the behavior in the other domain as linear. In this work, we develop a fully-coupled nonlinear frequency domain method which is capable of resolving nonlinear flow and structural effects. We demonstrate the computational performance of this method for a state-of-the-art aeroelastic model of a shrouded turbine blade row. Besides simulating limit cycles, we predict, for the first time, the phenomenon of nonlinear instability, i.e., a situation where the equilibrium point is locally stable, but for sufficiently strong perturbation (caused e.g. by an impact), the dry frictional dissipation cannot bound the flutter vibrations. This implies that linearized theory does not necessary lead to a conservative design of turbine blades. We show that this phenomenon is due to the nonlinear contact interactions at the tip shrouds, which cause a change of the vibrational deflection shape and frequency, which in turn leads to a loss of aeroelastic stability. Finally, we extend the well-known energy method to capture these effects, and conclude that it provides a good approximation and is useful for initializing the fully-coupled solver.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Toward understanding the self-adaptive dynamics of a harmonically forced beam with a sliding mass
Authors:
Malte Krack,
Noha Aboulfotoh,
Jens Twiefel,
Jörg Wallaschek,
Lawrence A. Bergman,
Alexander F. Vakakis
Abstract:
A mechanical system consisting of an elastic beam under harmonic excitation and an attached sliding body is investigated. Recent experimental observations suggest that the system passively (self-)adapts the axial location of the slider to achieve and maintain a condition of self-resonance, which could be useful in applications such as energy harvesting. The purpose of this work is to provide a the…
▽ More
A mechanical system consisting of an elastic beam under harmonic excitation and an attached sliding body is investigated. Recent experimental observations suggest that the system passively (self-)adapts the axial location of the slider to achieve and maintain a condition of self-resonance, which could be useful in applications such as energy harvesting. The purpose of this work is to provide a theoretical explanation of this phenomenon based on an appropriate model. A key feature of the proposed model is a small clearance between the slider and the beam. This clearance gives rise to backlash and frictional contact interactions, both of which are found to be essential for the self-adaptive behavior. Contact is modeled in terms of the Coulomb and Signorini laws, together with the Newton impact law. The set-valued character of the contact laws is accounted for in a measure differential inclusion formulation. Numerical integration is carried out using Moreau's time-stepping scheme. The proposed model reproduces qualitatively most experimental observations. However, although the system showed a distinct self-adaptive character, the behavior was found to be non-resonant for the considered set of parameters. Beside estimating the relationship between resonance frequency and slider location, the model permits predicting the operating limits with regard to excitation level and frequency. Finally, some specific dynamical phenomena such as hysteresis effects and transient resonance captures underline the rich dynamical behavior of the system.
△ Less
Submitted 28 December, 2020;
originally announced January 2021.
-
Global complexity effects due to local damping in a nonlinear system in 1:3 internal resonance
Authors:
Malte Krack,
Lawrence A. Bergman,
Alexander F. Vakakis
Abstract:
It is well-known that nonlinearity may lead to localization effects and coupling of internally resonant modes. However, research focused primarily on conservative systems commonly assumes that the near-resonant forced response closely follows the autonomous dynamics. Our results for even a simple system of two coupled oscillators with a cubic spring clearly contradict this common belief. We demons…
▽ More
It is well-known that nonlinearity may lead to localization effects and coupling of internally resonant modes. However, research focused primarily on conservative systems commonly assumes that the near-resonant forced response closely follows the autonomous dynamics. Our results for even a simple system of two coupled oscillators with a cubic spring clearly contradict this common belief. We demonstrate analytically and numerically global effects of a weak local damping source in a harmonically forced nonlinear system under condition of 1:3 internal resonance: The global motion becomes asynchronous, i.e., mode complexity is introduced with a non-trivial phase difference between the modal oscillations. In particular, we show that a maximum mode complexity with a phase difference of $90^\circ$ is attained in a multi-harmonic sense. This corresponds to a transition from generalized standing to traveling waves in the system's modal space. We further demonstrate that the localization is crucially affected by the system's damping. Finally, we propose an extension of the definition of mode complexity and mode localization to nonlinear quasi-periodic motions, and illustrate their application to a quasi-periodic regime in the forced response.
△ Less
Submitted 28 December, 2020;
originally announced January 2021.
-
On the Efficacy of Friction Damping in the Presence of Nonlinear Modal Interactions
Authors:
Malte Krack,
Lawrence A. Bergman,
Alexander F. Vakakis
Abstract:
This work addresses friction-induced modal interactions in jointed structures, and their effects on the passive mitigation of vibrations by means of friction damping. Under the condition of (nearly) commensurable natural frequencies, the nonlinear character of friction can cause so-called nonlinear modal interactions. If harmonic forcing near the natural frequency of a specific mode is applied, fo…
▽ More
This work addresses friction-induced modal interactions in jointed structures, and their effects on the passive mitigation of vibrations by means of friction damping. Under the condition of (nearly) commensurable natural frequencies, the nonlinear character of friction can cause so-called nonlinear modal interactions. If harmonic forcing near the natural frequency of a specific mode is applied, for instance, another mode may be excited due to nonlinear energy transfer and thus contribute considerably to the vibration response. We investigate how this phenomenon affects the performance of friction damping. To this end, we study the steady-state, periodic forced vibrations of a system of two beams connected via a local mechanical friction joint. The system can be tuned to continuously adjust the ratio between the first two natural frequencies in the range around the $1:3$ internal resonance, in order to trigger or suppress the emergence of modal interactions. Due to the re-distribution of the vibration energy, the vibration level can in fact be reduced in certain situations. However, in other situations, the multi-harmonic character of the vibration has detrimental effects on the effective damping provided by the friction joint. The resulting response level can be significantly larger than in the absence of modal interactions. Moreover, it is shown that the vibration behavior is highly sensitive in the neighborhood of internal resonances. It is thus concluded that the condition of internal resonance should be avoided in the design of friction-damped systems.
△ Less
Submitted 28 December, 2020;
originally announced January 2021.
-
A High-Order Harmonic Balance Method for Systems With Distinct States
Authors:
Malte Krack,
Lars Panning-von Scheidt,
Jörg Wallaschek
Abstract:
A pure frequency domain method for the computation of periodic solutions of nonlinear ordinary differential equations (ODEs) is proposed in this study. The method is particularly suitable for the analysis of systems that feature distinct states, i.e. where the ODEs involve piecewise defined functions. An event-driven scheme is used which is based on the direct calculation of the state transition t…
▽ More
A pure frequency domain method for the computation of periodic solutions of nonlinear ordinary differential equations (ODEs) is proposed in this study. The method is particularly suitable for the analysis of systems that feature distinct states, i.e. where the ODEs involve piecewise defined functions. An event-driven scheme is used which is based on the direct calculation of the state transition time instants between these states. An analytical formulation of the governing nonlinear algebraic system of equations is developed for the case of piecewise polynomial systems. Moreover, it is shown that derivatives of the solution of up to second order can be calculated analytically, making the method especially attractive for design studies. The methodology is applied to several structural dynamical systems with conservative and dissipative nonlinearities in externally excited and autonomous configurations. Great performance and robustness of the proposed procedure was ascertained.
△ Less
Submitted 28 December, 2020;
originally announced January 2021.
-
A method for nonlinear modal analysis and synthesis: Application to harmonically forced and self-excited mechanical systems
Authors:
Malte Krack,
Lars Panning-von Scheidt,
Jörg Wallaschek
Abstract:
The recently developed generalized Fourier-Galerkin method is complemented by a numerical continuation with respect to the kinetic energy, which extends the framework to the investigation of modal interactions resulting in folds of the nonlinear modes. In order to enhance the practicability regarding the investigation of complex large-scale systems, it is proposed to provide analytical gradients a…
▽ More
The recently developed generalized Fourier-Galerkin method is complemented by a numerical continuation with respect to the kinetic energy, which extends the framework to the investigation of modal interactions resulting in folds of the nonlinear modes. In order to enhance the practicability regarding the investigation of complex large-scale systems, it is proposed to provide analytical gradients and exploit sparsity of the nonlinear part of the governing algebraic equations. A novel reduced order model (ROM) is developed for those regimes where internal resonances are absent. The approach allows for an accurate approximation of the multi-harmonic content of the resonant mode and accounts for the contributions of the off-resonant modes in their linearized forms. The ROM facilitates the efficient analysis of self-excited limit cycle oscillations, frequency response functions and the direct tracing of forced resonances. The ROM is equipped with a large parameter space including parameters associated with linear damping and near-resonant harmonic forcing terms. An important objective of this paper is to demonstrate the broad applicability of the proposed overall methodology. This is achieved by selected numerical examples including finite element models of structures with strongly nonlinear, non-conservative contact constraints.
△ Less
Submitted 28 December, 2020;
originally announced January 2021.
-
Nonlinear modal analysis of nonconservative systems: Extension of the periodic motion concept
Authors:
Malte Krack
Abstract:
As the motions of nonconservative autonomous systems are typically not periodic, the definition of nonlinear modes as periodic motions cannot be applied in the classical sense. In this paper, it is proposed 'make the motions periodic' by introducing an additional damping term of appropriate sign and magnitude. It is shown that this generalized definition is particularly suited to reflect the perio…
▽ More
As the motions of nonconservative autonomous systems are typically not periodic, the definition of nonlinear modes as periodic motions cannot be applied in the classical sense. In this paper, it is proposed 'make the motions periodic' by introducing an additional damping term of appropriate sign and magnitude. It is shown that this generalized definition is particularly suited to reflect the periodic vibration behavior induced by harmonic external forcing or negative linear damping. In a large range, the energy dependence of modal frequency, damping ratio and stability is reproduced well. The limitation to isolated or weakly-damped modes is discussed.
△ Less
Submitted 28 December, 2020;
originally announced January 2021.
-
On the computation of the slow dynamics of nonlinear modes of mechanical systems
Authors:
Malte Krack,
Lars Panning-von Scheidt,
Jörg Wallaschek
Abstract:
A novel method for the numerical prediction of the slowly varying dynamics of nonlinear mechanical systems has been developed. The method is restricted to the regime of an isolated nonlinear mode and consists of a two-step procedure: In the first step, a multiharmonic analysis of the autonomous system is performed to directly compute the amplitude-dependent characteristics of the considered nonlin…
▽ More
A novel method for the numerical prediction of the slowly varying dynamics of nonlinear mechanical systems has been developed. The method is restricted to the regime of an isolated nonlinear mode and consists of a two-step procedure: In the first step, a multiharmonic analysis of the autonomous system is performed to directly compute the amplitude-dependent characteristics of the considered nonlinear mode. In the second step, these modal properties are used to construct a two-dimensional reduced order model (ROM) that facilitates the efficient computation of steady-state and unsteady dynamics provided that nonlinear modal interactions are absent. The proposed methodology is applied to several nonlinear mechanical systems ranging form single degree-of-freedom to Finite Element models. Unsteady vibration phenomena such as approaching behavior towards an equilibrium point or limit cycles, and resonance passages are studied regarding the effect of various nonlinearities such as cubic springs, unilateral contact and friction. It is found that the proposed ROM facilitates very fast and accurate analysis of the slow dynamics of nonlinear systems. Moreover, the ROM concept offers a huge parameter space including additional linear damping, stiffness and near-resonant forcing.
△ Less
Submitted 28 December, 2020;
originally announced December 2020.
-
Reliability optimization of friction-damped systems using nonlinear modes
Authors:
Malte Krack,
Sebastian Tatzko,
Lars Panning-von Scheidt,
Jörg Wallaschek
Abstract:
A novel probabilistic approach for the design of mechanical structures with friction interfaces is proposed. The objective function is defined as the probability that a specified performance measure of the forced vibration response is achieved subject to parameter uncertainties. The practicability of the approach regarding the extensive amount of required design evaluations is strictly related to…
▽ More
A novel probabilistic approach for the design of mechanical structures with friction interfaces is proposed. The objective function is defined as the probability that a specified performance measure of the forced vibration response is achieved subject to parameter uncertainties. The practicability of the approach regarding the extensive amount of required design evaluations is strictly related to the computational efficiency of the nonlinear dynamic analysis. Therefore, it is proposed to employ a recently developed parametric reduced order model (ROM) based on nonlinear modes of vibration, which can facilitate a decrease of the computational burden by several orders of magnitude. The approach was applied to a rotationally periodic assembly of a bladed disk with underplatform friction dampers. The robustness of the optimum damper design was significantly improved compared to the deterministic approach, taking into account uncertainties in the friction coefficient, the excitation level and the linear damping. Moreover, a scale invariance for piecewise linear contact constraints is proven, which can be very useful for the reduction of the numerical effort for the analysis of such systems.
△ Less
Submitted 28 December, 2020;
originally announced December 2020.
-
An efficient method for approximating resonance curves of weakly-damped nonlinear mechanical systems
Authors:
Alwin Förster,
Malte Krack
Abstract:
A method is presented for tracing the locus of a specific peak in the frequency response under variation of a parameter. It is applicable to periodic, steady-state vibrations of harmonically forced nonlinear mechanical systems. It operates in the frequency domain and its central idea is to assume a constant phase lag between forcing and response. The method is validated for a two-degree-of-freedom…
▽ More
A method is presented for tracing the locus of a specific peak in the frequency response under variation of a parameter. It is applicable to periodic, steady-state vibrations of harmonically forced nonlinear mechanical systems. It operates in the frequency domain and its central idea is to assume a constant phase lag between forcing and response. The method is validated for a two-degree-of-freedom oscillator with cubic spring and a bladed disk with shroud contact. The method provides superior computational efficiency, but is limited to weakly-damped systems. Finally, the capability to reveal isolated solution branches is highlighted.
△ Less
Submitted 28 December, 2020;
originally announced December 2020.
-
Effects of modal energy scattering and friction on the resonance mitigation with an impact absorber
Authors:
Timo Theurich,
Johann Gross,
Malte Krack
Abstract:
A linear vibration absorber can be tuned to effectively suppress the resonance of a particular vibration mode. It relies on the targeted energy transfer into the absorber within a narrow and fixed frequency band. Nonlinear energy sinks (NES) have a similar working principle. They are effective in a much wider frequency band but generally only in a limited range of excitation levels. To design NES,…
▽ More
A linear vibration absorber can be tuned to effectively suppress the resonance of a particular vibration mode. It relies on the targeted energy transfer into the absorber within a narrow and fixed frequency band. Nonlinear energy sinks (NES) have a similar working principle. They are effective in a much wider frequency band but generally only in a limited range of excitation levels. To design NES, their working principle must be thoroughly understood. We consider a particular type of NES, a small mass undergoing impacts and dry friction within a cavity of a base structure (vibro-impact NES or impact absorber). The nonlinear dynamic regimes under near-resonant forcing and resulting operating ranges are first revisited. We then investigate how off-resonant vibration modes and dissipation via impacts and dry friction contribute to the vibration suppression. Moreover, we assess the effectiveness of the impact absorber for suppressing multiple resonances in comparison to a linear tuned vibration absorber (LTVA) and a pure friction damper with the same mass.
△ Less
Submitted 11 November, 2020;
originally announced December 2020.
-
Challenging an experimental nonlinear modal analysis method with a new strongly friction-damped structure
Authors:
Maren Scheel,
Tobias Weigele,
Malte Krack
Abstract:
In this work, we show that a recently proposed method for experimental nonlinear modal analysis based on the extended periodic motion concept is well suited to extract modal properties for strongly nonlinear systems (i.e. in the presence of large frequency shifts, high and nonlinear damping, changes of the mode shape, and higher harmonics). To this end, we design a new test rig that exhibits a lar…
▽ More
In this work, we show that a recently proposed method for experimental nonlinear modal analysis based on the extended periodic motion concept is well suited to extract modal properties for strongly nonlinear systems (i.e. in the presence of large frequency shifts, high and nonlinear damping, changes of the mode shape, and higher harmonics). To this end, we design a new test rig that exhibits a large extent of friction-induced damping (modal damping ratio up to 15 %) and frequency shift by 36 %. The specimen, called RubBeR, is a cantilevered beam under the influence of dry friction, ranging from full stick to mainly sliding. With the specimen's design, the measurements are well repeatable for a system subjected to dry frictional force. Then, we apply the method to the specimen and show that single-point excitation is sufficient to track the modal properties even though the deflection shape changes with amplitude. Computed frequency responses using a single nonlinear-modal oscillator with the identified modal properties agree well with measured reference curves of different excitation levels, indicating the modal properties' significance and accuracy.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Experimental assessment of polynomial nonlinear state-space and nonlinear-mode models for near-resonant vibrations
Authors:
Maren Scheel,
Gleb Kleyman,
Ali Tatar,
Matthew R. W. Brake,
Simon Peter,
Jean-Philippe Noël,
Matthew S. Allen,
Malte Krack
Abstract:
In the present paper, two existing nonlinear system identification methodologies are used to identify data-driven models. The first methodology focuses on identifying the system using steady-state excitations. To accomplish this, a phase-locked loop controller is implemented to acquire periodic oscillations near resonance and construct a nonlinear-mode model. This model is based on amplitude-depen…
▽ More
In the present paper, two existing nonlinear system identification methodologies are used to identify data-driven models. The first methodology focuses on identifying the system using steady-state excitations. To accomplish this, a phase-locked loop controller is implemented to acquire periodic oscillations near resonance and construct a nonlinear-mode model. This model is based on amplitude-dependent modal properties, i.e. does not require nonlinear basis functions. The second methodology exploits uncontrolled experiments with broadband random inputs to build polynomial nonlinear state-space models using advanced system identification tools. The methods are applied to two experimental test rigs, a magnetic cantilever beam and a free-free beam with a lap joint. The respective models of both methods and both specimens are then challenged to predict dynamic, near-resonant behavior observed under different sine and sine-sweep excitations. The vibration prediction of the nonlinear-mode and state-space models clearly highlight the capabilities and limitations of the models. The nonlinear-mode model, by design, yields a perfect match at resonance peaks and high accuracy in close vicinity. However, it is limited to well-spaced modes and sinusoidal excitation. The state-space model covers a wider dynamic range, including transient excitations. However, the real-life nonlinearities considered in this study can only be approximated by polynomial basis functions. Consequently, the identified state-space models are found to be highly input-dependent, in particular for sinusoidal excitations where they are found to lead to a low predictive capability.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
A Phase Resonance Approach for Modal Testing of Structures with Nonlinear Dissipation
Authors:
Maren Scheel,
Simon Peter,
Remco I. Leine,
Malte Krack
Abstract:
The concept of nonlinear modes is useful for the dynamical characterization of nonlinear mechanical systems. While efficient and broadly applicable methods are now available for the computation of nonlinear modes, nonlinear modal testing is still in its infancy. The purpose of this work is to overcome its present limitation to conservative nonlinearities. Our approach relies on the recently extend…
▽ More
The concept of nonlinear modes is useful for the dynamical characterization of nonlinear mechanical systems. While efficient and broadly applicable methods are now available for the computation of nonlinear modes, nonlinear modal testing is still in its infancy. The purpose of this work is to overcome its present limitation to conservative nonlinearities. Our approach relies on the recently extended periodic motion concept, according to which nonlinear modes of damped systems are defined as family of periodic motions induced by an appropriate artificial excitation that compensates the natural dissipation. The particularly simple experimental implementation with only a single-point, single-frequency, phase resonant forcing is analyzed in detail. The method permits the experimental extraction of natural frequencies, modal damping ratios and deflection shapes (including harmonics), for each mode of interest, as function of the vibration level. The accuracy, robustness and current limitations of the method are first demonstrated numerically. The method is then verified experimentally for a friction-damped system. Moreover, a self-contained measure for estimating the quality of the extracted modal properties is investigated. The primary advantages over alternative vibration testing methods are noise robustness, broad applicability and short measurement duration. The central limitation of the identified modal quantities is that they only characterize the system in the regime near isolated resonances.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
CP2K: An Electronic Structure and Molecular Dynamics Software Package -- Quickstep: Efficient and Accurate Electronic Structure Calculations
Authors:
Thomas D. Kühne,
Marcella Iannuzzi,
Mauro Del Ben,
Vladimir V. Rybkin,
Patrick Seewald,
Frederick Stein,
Teodoro Laino,
Rustam Z. Khaliullin,
Ole Schütt,
Florian Schiffmann,
Dorothea Golze,
Jan Wilhelm,
Sergey Chulkov,
Mohammad Hossein Bani-Hashemian,
Valéry Weber,
Urban Borstnik,
Mathieu Taillefumier,
Alice Shoshana Jakobovits,
Alfio Lazzaro,
Hans Pabst,
Tiziano Müller,
Robert Schade,
Manuel Guidon,
Samuel Andermatt,
Nico Holmberg
, et al. (14 additional authors not shown)
Abstract:
CP2K is an open source electronic structure and molecular dynamics software package to perform atomistic simulations of solid-state, liquid, molecular and biological systems. It is especially aimed at massively-parallel and linear-scaling electronic structure methods and state-of-the-art ab-initio molecular dynamics simulations. Excellent performance for electronic structure calculations is achiev…
▽ More
CP2K is an open source electronic structure and molecular dynamics software package to perform atomistic simulations of solid-state, liquid, molecular and biological systems. It is especially aimed at massively-parallel and linear-scaling electronic structure methods and state-of-the-art ab-initio molecular dynamics simulations. Excellent performance for electronic structure calculations is achieved using novel algorithms implemented for modern high-performance computing systems. This review revisits the main capabilities of CP2k to perform efficient and accurate electronic structure simulations. The emphasis is put on density functional theory and multiple post-Hartree-Fock methods using the Gaussian and plane wave approach and its augmented all-electron extension.
△ Less
Submitted 11 March, 2020; v1 submitted 8 March, 2020;
originally announced March 2020.
-
Ab initio molecular dynamics simulations of negative thermal expansion in ScF3: the effect of the supercell size
Authors:
D. Bocharov,
M. Krack,
Yu. Rafalskij,
A. Kuzmin,
J. Purans
Abstract:
Scandium fluoride (ScF3) belongs to a class of negative thermal expansion (NTE) materials. It shows a strong lattice contraction up to about 1000 K switching to expansion at higher temperatures. Here the NTE effect in ScF3 is studied in the temperature range from 300 K to 1600 K using ab initio molecular dynamics (AIMD) simulations in the isothermal-isobaric (NpT) ensemble. The temperature depende…
▽ More
Scandium fluoride (ScF3) belongs to a class of negative thermal expansion (NTE) materials. It shows a strong lattice contraction up to about 1000 K switching to expansion at higher temperatures. Here the NTE effect in ScF3 is studied in the temperature range from 300 K to 1600 K using ab initio molecular dynamics (AIMD) simulations in the isothermal-isobaric (NpT) ensemble. The temperature dependence of the lattice constant, inter-atomic Sc-F-Sc bond angle distributions and the Sc-F and Sc-Sc radial distribution functions is obtained as a function of supercell size from 2a x 2a x 2a to 5a x 5a x 5a where a is the lattice parameter of ScF3. A comparison with the experimental Sc K-edge EXAFS data at 600 K is used to validate the accuracy of the AIMD simulations. Our results suggest that the AIMD calculations are able to reproduce qualitatively the NTE effect in ScF3, however a supercell size larger than 2a x 2a x 2a should be used to account accurately for dynamic disorder. The origin of the NTE in ScF3 is explained by the interplay between expansion and rotation of ScF6 octahedra.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
Comparative classical and ab initio Molecular Dynamics study of molten and glassy germanium dioxide
Authors:
Michael Hawlitzky,
Juergen Horbach,
Simona Ispas,
Matthias Krack,
Kurt Binder
Abstract:
A Molecular Dynamics (MD) study of static and dynamic properties of molten and glassy germanium dioxide is presented. The interactions between the atoms are modelled by the classical pair potential proposed by Oeffner and Elliott (OE) [Oeffner R D and Elliott S R 1998, Phys. Rev. B, 58, 14791]. We compare our results to experiments and previous simulations. In addition, an ab initio method, the…
▽ More
A Molecular Dynamics (MD) study of static and dynamic properties of molten and glassy germanium dioxide is presented. The interactions between the atoms are modelled by the classical pair potential proposed by Oeffner and Elliott (OE) [Oeffner R D and Elliott S R 1998, Phys. Rev. B, 58, 14791]. We compare our results to experiments and previous simulations. In addition, an ab initio method, the so-called Car-Parrinello Molecular Dynamics (CPMD), is applied to check the accuracy of the structural properties, as obtained by the classical MD simulations with the OE potential. As in a similar study for SiO2, the structure predicted by CPMD is only slightly softer than that resulting from the classical MD. In contrast to earlier simulations, both the static structure and dynamic properties are in very good agreement with pertinent experimental data. MD simulations with the OE potential are also used to study the relaxation dynamics. As previously found for SiO2, for high temperatures the dynamics of molten GeO2 is compatible with a description in terms of mode coupling theory.
△ Less
Submitted 16 April, 2008;
originally announced April 2008.
-
Coexistence of tetrahedral and octahedral-like sites in amorphous phase change materials
Authors:
S. Caravati,
M. Bernasconi,
T. D. Kuehne,
M. Krack,
M. Parrinello
Abstract:
Chalcogenide alloys are materials of interest for optical recording and non-volatile memories. We perform ab-initio molecular dynamics simulations aiming at shading light onto the structure of amorphous Ge2Sb2Te5 (GST), the prototypical material in this class. First principles simulations show that amorphous GST obtained by quenching from the liquid phase displays two types of short range order.…
▽ More
Chalcogenide alloys are materials of interest for optical recording and non-volatile memories. We perform ab-initio molecular dynamics simulations aiming at shading light onto the structure of amorphous Ge2Sb2Te5 (GST), the prototypical material in this class. First principles simulations show that amorphous GST obtained by quenching from the liquid phase displays two types of short range order. One third of Ge atoms are in a tetrahedral environment while the remaining Ge, Sb and Te atoms display a defective octahedral environment, reminiscent of cubic crystalline GST.
△ Less
Submitted 1 April, 2008; v1 submitted 9 August, 2007;
originally announced August 2007.
-
An Efficient and Accurate Car-Parrinello-like Approach to Born-Oppenheimer Molecular Dynamics
Authors:
Thomas D. Kühne,
Matthias Krack,
Fawzi R. Mohamed,
Michele Parrinello
Abstract:
We present a new method which combines Car-Parrinello and Born-Oppenheimer molecular dynamics in order to accelerate density functional theory based ab-initio simulations. Depending on the system a gain in efficiency of one to two orders of magnitude has been observed, which allows ab-initio molecular dynamics of much larger time and length scales than previously thought feasible. It will be dem…
▽ More
We present a new method which combines Car-Parrinello and Born-Oppenheimer molecular dynamics in order to accelerate density functional theory based ab-initio simulations. Depending on the system a gain in efficiency of one to two orders of magnitude has been observed, which allows ab-initio molecular dynamics of much larger time and length scales than previously thought feasible. It will be demonstrated that the dynamics is correctly reproduced and that high accuracy can be maintained throughout for systems ranging from insulators to semiconductors and even to metals in condensed phases. This development considerably extends the scope of ab-initio simulations.
△ Less
Submitted 20 December, 2006; v1 submitted 19 October, 2006;
originally announced October 2006.
