Showing 1–16 of 16 results for author: Kurennoy, S S

H-Mode Accelerating Structures with PMQ Beam Focusing

Authors: Sergey S. Kurennoy, Lawrence J. Rybarcyk, James F. O'Hara, Eric R. Olivas, Thomas P. Wangler

Abstract: We have developed high-efficiency normal-conducting RF accelerating structures by combining H-mode resonator cavities and a transverse beam focusing by permanent-magnet quadrupoles (PMQ), for beam velocities in the range of a few percent of the speed of light. The shunt impedance of inter-digital H-mode (IH-PMQ) structures is 10-20 times higher than that of a conventional drift-tube linac, while t… ▽ More We have developed high-efficiency normal-conducting RF accelerating structures by combining H-mode resonator cavities and a transverse beam focusing by permanent-magnet quadrupoles (PMQ), for beam velocities in the range of a few percent of the speed of light. The shunt impedance of inter-digital H-mode (IH-PMQ) structures is 10-20 times higher than that of a conventional drift-tube linac, while the transverse size is 4-5 times smaller. Results of the combined 3-D modeling - electromagnetic computations, multi-particle beam-dynamics simulations with high currents, and thermal-stress analysis - for an IH-PMQ accelerator tank are presented. The accelerating field profile in the tank is tuned to provide the best propagation of a 50-mA deuteron beam using coupled iterations of electromagnetic and beam-dynamics modeling. Measurements of a cold model of the IH-PMQ tank show a good agreement with the calculations. H-PMQ accelerating structures following a short RFQ can be used both in the front end of ion linacs or in stand-alone applications. △ Less

Submitted 19 April, 2011; originally announced April 2011.

Comments: 17 pages, 24 figures; submitted to Phys. Rev. ST-AB

Report number: LA-UR-11-10425

Coupling Impedances of Small Discontinuities: Dependence on Beam Velocity

Authors: Sergey S. Kurennoy

Abstract: The beam coupling impedances of small discontinuities of an accelerator vacuum chamber have been calculated [e.g., S.S. Kurennoy, R.L. Gluckstern, and G.V. Stupakov, Phys. Rev. E 52, 4354 (1995)] for ultrarelativistic beams using the Bethe diffraction theory. Here we extend the results to an arbitrary beam velocity. The vacuum chamber is assumed to have an arbitrary, but uniform along the beam p… ▽ More The beam coupling impedances of small discontinuities of an accelerator vacuum chamber have been calculated [e.g., S.S. Kurennoy, R.L. Gluckstern, and G.V. Stupakov, Phys. Rev. E 52, 4354 (1995)] for ultrarelativistic beams using the Bethe diffraction theory. Here we extend the results to an arbitrary beam velocity. The vacuum chamber is assumed to have an arbitrary, but uniform along the beam path, cross section. The longitudinal and transverse coupling impedances are derived in terms of series over cross-section eigenfunctions, while the discontinuity shape enters via its polarizabilities. Simple explicit formulas for two important particular cases - circular and rectangular chamber cross sections - are presented. The impedance dependence on the beam velocity exhibits some unusual features: for example, the reactive impedance, which dominates in the ultrarelativistic limit, can vanish at a certain beam velocity, or its magnitude can exceed the ultrarelativistic value many times. In addition, we demonstrate that the same technique, the field expansion into a series of cross-section eigenfunctions, is convenient for calculating the space-charge impedance of uniform beam pipes with arbitrary cross section. △ Less

Submitted 27 March, 2006; originally announced March 2006.

Comments: REVTeX, 11 pages, 6 figures. Submitted to Phys. Rev. ST - Accel. Beams

Report number: LA-UR-06-2206

Journal ref: Phys. Rev. ST-AB, v. 9, 054201 (2006)

Nonlinearities and Effects of Transverse Beam Size in Beam Position Monitors (revised)

Authors: Sergey S. Kurennoy

Abstract: The fields produced by a long beam with a given transverse charge distribution in a homogeneous vacuum chamber are studied. Signals induced by a displaced finite-size beam on electrodes of a beam position monitor (BPM) are calculated and compared to those produced by a pencil beam. The non-linearities and corrections to BPM signals due to a finite transverse beam size are calculated for an arbit… ▽ More The fields produced by a long beam with a given transverse charge distribution in a homogeneous vacuum chamber are studied. Signals induced by a displaced finite-size beam on electrodes of a beam position monitor (BPM) are calculated and compared to those produced by a pencil beam. The non-linearities and corrections to BPM signals due to a finite transverse beam size are calculated for an arbitrary chamber cross section. Simple analytical expressions are given for a few particular transverse distributions of the beam current in a circular or rectangular chamber. Of particular interest is a general proof that in an arbitrary homogeneous chamber the beam-size corrections vanish for any axisymmetric beam current distribution. △ Less

Submitted 11 February, 2003; v1 submitted 9 August, 2001; originally announced August 2001.

Comments: REVTeX, 8 pages, 9 figures. Corrected Eqs. (7),(22),(25) and Figs. 2-9. Expanded

Report number: LA-UR-01-3590

Journal ref: Phys.Rev.ST Accel.Beams 4:092801,2001; Erratum-ibid.6:039902,2003

Beam Position-Phase Monitors for SNS Linac

Authors: Sergey S. Kurennoy

Abstract: Electromagnetic modeling with MAFIA of the combined beam position-phase monitors (BPPMs) for the Spallation Neutron Source (SNS) linac has been performed. Time-domain 3-D simulations are used to compute the signal amplitudes and phases on the BPPM electrodes for a given processing frequency, 402.5 MHz or 805 MHz, as functions of the beam transverse position. Working with a summed signal from all… ▽ More Electromagnetic modeling with MAFIA of the combined beam position-phase monitors (BPPMs) for the Spallation Neutron Source (SNS) linac has been performed. Time-domain 3-D simulations are used to compute the signal amplitudes and phases on the BPPM electrodes for a given processing frequency, 402.5 MHz or 805 MHz, as functions of the beam transverse position. Working with a summed signal from all the BPPM electrodes provides a good way to measure accurately the beam phase. While for an off-axis beam the signal phases on the individual electrodes can differ from those for a centered beam by a few degrees, the phase of the summed signal is found to be independent of the beam transverse position inside the device. Based on the analysis results, an optimal BPPM design with 4 one-end-shorted 60-degree electrodes has been chosen. It provides a good linearity and sufficient signal power for both position and phase measurements, while satisfying the linac geometrical constrains and mechanical requirements. △ Less

Submitted 16 August, 2000; originally announced August 2000.

Comments: 3 pages, 3 figures, LINAC2000 paper MOC11

Report number: LA-UR-00-3825

Journal ref: eConf C000821:MOC11,2000

Halo Formation in Spheroidal Bunches with Self-Consistent Stationary Distributions

Authors: A. V. Fedotov, R. L. Gluckstern, S. S. Kurennoy, R. D. Ryne

Abstract: A new class of self-consistent 6-D phase space stationary distributions is constructed both analytically and numerically. The beam is then mismatched longitudinally and/or transversely, and we explore the beam stability and halo formation for the case of 3-D axisymmetric beam bunches using particle-in-cell simulations. We concentrate on beams with bunch length-to-width ratios varying from 1 to 5… ▽ More A new class of self-consistent 6-D phase space stationary distributions is constructed both analytically and numerically. The beam is then mismatched longitudinally and/or transversely, and we explore the beam stability and halo formation for the case of 3-D axisymmetric beam bunches using particle-in-cell simulations. We concentrate on beams with bunch length-to-width ratios varying from 1 to 5, which covers the typical range of the APT linac parameters. We find that the longitudinal halo forms first for comparable longitudinal and transverse mismatches. An interesting coupling phenomenon - a longitudinal or transverse halo is observed even for very small mismatches if the mismatch in the other plane is large - is discovered. △ Less

Submitted 20 July, 1998; originally announced July 1998.

Comments: 3 pages, 3 figures; presented at European Particle Accelerator Conference, Stockholm, Sweden (June 22-26, 1998)

Report number: LA-UR-98-2789

Cavity Loss Factors For Non-Ultrarelativistic Beams

Authors: Sergey S. Kurennoy

Abstract: Cavity loss factors can be easily computed for ultrarelativistic beams using time-domain codes like MAFIA or ABCI. However, for non-ultrarelativistic beams the problem is more complicated because of difficulties with its numerical formulation in the time domain. We calculate the loss factors of a non-ultrarelativistic bunch and compare results with the relativistic case. Cavity loss factors can be easily computed for ultrarelativistic beams using time-domain codes like MAFIA or ABCI. However, for non-ultrarelativistic beams the problem is more complicated because of difficulties with its numerical formulation in the time domain. We calculate the loss factors of a non-ultrarelativistic bunch and compare results with the relativistic case. △ Less

Submitted 20 July, 1998; originally announced July 1998.

Comments: 3 pages, 3 figures; presented at European Particle Accelerator Conference, Stockholm, Sweden (June 22-26, 1998)

Report number: LA-UR-98-2787

Wake Field Effect Analysis in APT Linac

Authors: Sergey S. Kurennoy

Abstract: The 1.7-GeV 100-mA CW proton linac is now under design for the Accelerator Production of Tritium (APT) Project. The APT linac comprises both the normal conducting (below 211 MeV) and superconducting (SC) sections. The high current leads to stringent restrictions on allowable beam losses (<1 nA/m), that requires analyzing carefully all possible loss sources. While wake-field effects are usually c… ▽ More The 1.7-GeV 100-mA CW proton linac is now under design for the Accelerator Production of Tritium (APT) Project. The APT linac comprises both the normal conducting (below 211 MeV) and superconducting (SC) sections. The high current leads to stringent restrictions on allowable beam losses (<1 nA/m), that requires analyzing carefully all possible loss sources. While wake-field effects are usually considered negligible in proton linacs, we study these effects for the APT to exclude potential problems at such a high current. Loss factors and resonance frequency spectra of various discontinuities of the vacuum chamber are investigated, both analytically and using 2-D and 3-D simulation codes with a single bunch as well as with many bunches. Our main conclusion is that the only noticeable effect is the HOM heating of the 5-cell SC cavities. It, however, has an acceptable level and, in addition, will be taken care of by HOM couplers. △ Less

Submitted 20 July, 1998; originally announced July 1998.

Comments: 3 pages, 6 figures; presented at European Particle Accelerator Conference, Stockholm, Sweden (June 22-26, 1998)

Report number: LA-UR-98-2788

Stability and Halo Formation in Axisymmetric Intense Beams

Authors: Robert L. Gluckstern, Sergey S. Kurennoy

Abstract: Beam stability and halo formation in high-intensity axisymmetric 2D beams in a uniform focusing channel are analyzed using particle-in-cell simulations. The tune depression - mismatch space is explored for the uniform (KV) distribution of the particle transverse-phase-space density, as well as for more realistic ones (in particular, the water-bag distribution), to determine the stability limits… ▽ More Beam stability and halo formation in high-intensity axisymmetric 2D beams in a uniform focusing channel are analyzed using particle-in-cell simulations. The tune depression - mismatch space is explored for the uniform (KV) distribution of the particle transverse-phase-space density, as well as for more realistic ones (in particular, the water-bag distribution), to determine the stability limits and halo parameters. The numerical results show an agreement with predictions of the analytical model for halo formation (R.L. Gluckstern, Phys. Rev. Letters, 73 (1994) 1247). △ Less

Submitted 22 May, 1997; originally announced May 1997.

Comments: 4 pages, LaTeX (REVTeX), 5 figures (eps); presented at PAC97 (Vancouver, May 97)

Report number: LA-UR-97-1655

Journal ref: Conf.Proc.C970512:1950,1997

Beam Coupling Impedances of Obstacles Protruding into Beam Pipe

Authors: Sergey S. Kurennoy

Abstract: The beam coupling impedances of small obstacles protruding inside the vacuum chamber of an accelerator are calculated analytically at frequencies for which the wavelength is large compared to a typical size of the obstacle. Simple formulas for a few important particular cases, including both essentially three-dimensional objects like a post or a mask and axisymmetric irises, are presented. The a… ▽ More The beam coupling impedances of small obstacles protruding inside the vacuum chamber of an accelerator are calculated analytically at frequencies for which the wavelength is large compared to a typical size of the obstacle. Simple formulas for a few important particular cases, including both essentially three-dimensional objects like a post or a mask and axisymmetric irises, are presented. The analytical results are compared and agree with three-dimensional computer simulations. These results allow simple practical estimates of the broad-band impedance contributions from such discontinuities. △ Less

Submitted 18 June, 1997; v1 submitted 23 September, 1996; originally announced September 1996.

Comments: 4 pages, LaTeX (REVTeX), 2 figures (eps); corrected and revised, comparison with simulations added; presented at PAC97 (Vancouver, May 97)

Report number: LA-UR-97-1658

Journal ref: Phys.Rev.E55:3529-3532,1997

Coupling Impedances of Azimuthally Symmetric Obstacles of Semi-Elliptical Shape in a Beam Pipe

Authors: Robert L. Gluckstern, Sergey S. Kurennoy

Abstract: The beam coupling impedances of small axisymmetric obstacles having a semi-elliptical cross section along the beam in the vacuum chamber of an accelerator are calculated at frequencies for which the wavelength is large compared to a typical size of the obstacle. Analytical results are obtained for both the irises and the cavities with such a shape which allow simple estimates of their broad-band… ▽ More The beam coupling impedances of small axisymmetric obstacles having a semi-elliptical cross section along the beam in the vacuum chamber of an accelerator are calculated at frequencies for which the wavelength is large compared to a typical size of the obstacle. Analytical results are obtained for both the irises and the cavities with such a shape which allow simple estimates of their broad-band impedances. △ Less

Submitted 23 September, 1996; originally announced September 1996.

Comments: 6 pages, LaTeX, style revtex, 2 figures (eps). Submitted to Phys. Rev. E

Impedances and Power Losses for an Off-Axis Beam

Authors: Sergey S. Kurennoy

Abstract: A method for calculating coupling impedances and power losses for off-axis beams is developed. It is applied to calculate impedances of small localized discontinuities like holes and slots, as well as the impedance due to a finite resistivity of chamber walls, in homogeneous chambers with an arbitrary shape of the chamber cross section. The approach requires to solve a two-dimensional electrosta… ▽ More A method for calculating coupling impedances and power losses for off-axis beams is developed. It is applied to calculate impedances of small localized discontinuities like holes and slots, as well as the impedance due to a finite resistivity of chamber walls, in homogeneous chambers with an arbitrary shape of the chamber cross section. The approach requires to solve a two-dimensional electrostatic problem, which can be easily done numerically in the general case, while for some particular cases analytical solutions are obtained. △ Less

Submitted 11 July, 1996; originally announced July 1996.

Comments: 11 pages, LaTeX2e, 4 figures (eps) included. Presented at EPAC96 (Barcelona, Spain, June 1996)

Journal ref: Conf.Proc.C960610:1449-1451,1996

Polarizabilities of an Annular Cut in the Wall of an Arbitrary Thickness

Authors: Sergey S. Kurennoy

Abstract: The electric and magnetic polarizabilities of an aperture are its important characteristics in the theory of aperture coupling and diffraction of EM waves. The beam coupling impedances due to a small discontinuity on the chamber wall of an accelerator can also be expressed in terms of the polarizabilities of the discontinuity. The polarizabilities are geometrical factors which can be found by so… ▽ More The electric and magnetic polarizabilities of an aperture are its important characteristics in the theory of aperture coupling and diffraction of EM waves. The beam coupling impedances due to a small discontinuity on the chamber wall of an accelerator can also be expressed in terms of the polarizabilities of the discontinuity. The polarizabilities are geometrical factors which can be found by solving a static (electric or magnetic) problem. However, they are known in an explicit analytical form only for a few simple-shaped discontinuities, such as an elliptic hole in a thin wall. In the present paper the polarizabilities of a ring-shaped cut in the wall of an arbitrary thickness are studied using a combination of analytical, variational and numerical methods. The results are applied to estimate the coupling impedances of button-type beam position monitors. △ Less

Submitted 17 October, 1995; originally announced October 1995.

Comments: Uuencoded gzipped PS-file, 7 pages, 5 figures (110K) Submitted : IEEE Transactions on Microwave Theory and Techniques

Journal ref: IEEE Trans.Microwave Theor.Tech.44:1109-1114,1996

Polarizabilities of an Annular Cut and Coupling Impedances of Button-Type Beam Position Monitors

Authors: Sergey S. Kurennoy

Abstract: The longitudinal and transverse coupling impedances of a small discontinuity on the accelerator chamber wall can be expressed in terms of the electric and magnetic polarizabilities of the discontinuity. The polarizabilities are geometrical factors and can be found by solving a static (electric or magnetic) problem. However, they are known in the explicit analytical form only for a few simple-sha… ▽ More The longitudinal and transverse coupling impedances of a small discontinuity on the accelerator chamber wall can be expressed in terms of the electric and magnetic polarizabilities of the discontinuity. The polarizabilities are geometrical factors and can be found by solving a static (electric or magnetic) problem. However, they are known in the explicit analytical form only for a few simple-shaped discontinuities, for example, for an elliptic hole in a thin wall. In the present paper the polarizabilities of a ring-shaped cut in the wall are obtained. The results are applied to calculate the coupling impedances of button-type beam position monitors. △ Less

Submitted 27 April, 1995; originally announced April 1995.

Comments: Uuencoded gzipped PS-file, 3 pages, 2 figures (63K)

Report number: PAC95, Dallas, May 1-5, 1995 (RAR13)

Journal ref: Conf.Proc.C950501:3379-3381,1995

Trapped Modes in the Vacuum Chamber of an Arbitrary Cross Section

Authors: Sergey S. Kurennoy, Gennady V. Stupakov

Abstract: It has been shown that a small discontinuity such as an enlargement or a hole on circular waveguides can produce trapped electromagnetic modes with frequencies slightly below the waveguide cutoff. The trapped modes due to multiple discontinuities can lead to high narrow-band contributions to the beam-chamber coupling impedance, especially when the wall conductivity is high enough. To make more r… ▽ More It has been shown that a small discontinuity such as an enlargement or a hole on circular waveguides can produce trapped electromagnetic modes with frequencies slightly below the waveguide cutoff. The trapped modes due to multiple discontinuities can lead to high narrow-band contributions to the beam-chamber coupling impedance, especially when the wall conductivity is high enough. To make more reliable estimates of these contributions for real machines, an analytical theory of the trapped modes is developed in this paper for a general case of the vacuum chamber with an arbitrary single-connected cross section. The resonant frequencies and coupling impedances due to trapped modes are calculated, and simple explicit expressions are given for circular and rectangular cross sections. The estimates for the LHC are presented. △ Less

Submitted 27 April, 1995; originally announced April 1995.

Comments: LaTeX, 3 pages (IEEE format), uses pac95.sty (18K)

Report number: PAC95, Dallas, May 1-5, 1995 (RAR11)

Journal ref: Conf.Proc.C950501:3373-3375,1995

A General Approach for Calculating Coupling Impedances of Small Discontinuities

Authors: Sergey S. Kurennoy, Robert L. Gluckstern, Gennady V. Stupakov

Abstract: A general theory of the beam interaction with small discontinuities of the vacuum chamber is developed taking into account the reaction of radiated waves back on the discontinuity. The reactive impedance calculated earlier is reproduced as the first order, and the resistive one as the second order of a perturbation theory based on this general approach. The theory also gives, in a very natural w… ▽ More A general theory of the beam interaction with small discontinuities of the vacuum chamber is developed taking into account the reaction of radiated waves back on the discontinuity. The reactive impedance calculated earlier is reproduced as the first order, and the resistive one as the second order of a perturbation theory based on this general approach. The theory also gives, in a very natural way, the results for the trapped modes due to small discontinuities obtained earlier by a different method. △ Less

Submitted 27 April, 1995; originally announced April 1995.

Comments: LaTeX, 3 pages (IEEE format), uses pac95.sty (20K)

Report number: PAC95, Dallas, May 1-5, 1995 (RAR12)

Journal ref: Conf.Proc.C950501:3376-3378,1995

Coupling Impedances and Heating due to Slots in the KEK B-factory

Authors: Sergey S. Kurennoy, Yong Ho Chin

Abstract: The longitudinal and transverse coupling impedances produced by the long slots in the Low Energy Ring of KEK B-factory are calculated. The power dissipated inside the vacuum chamber due to the fields scattered by the slots is evaluated using results for the real part of the coupling impedance. Estimates are made for the power flow through the slots to the pumping chamber. The longitudinal and transverse coupling impedances produced by the long slots in the Low Energy Ring of KEK B-factory are calculated. The power dissipated inside the vacuum chamber due to the fields scattered by the slots is evaluated using results for the real part of the coupling impedance. Estimates are made for the power flow through the slots to the pumping chamber. △ Less

Submitted 21 February, 1995; originally announced February 1995.

Comments: 14 pages, uuencoded gzipped PS-file (141K)

Report number: KEK-94-193