Showing 1–21 of 21 results for author: Li, Y M

Measurements of branching fractions and CP-violating charge asymmetries in charmless $B$ decays reconstructed in 2019--2020 Belle~II data

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (522 additional authors not shown)

Abstract: We report on first measurements of branching fractions~($\mathcal{B}$) and CP-violating charge asymmetries~($\mathcal{A}$) in charmless $B$ decays at Belle~II. We use a sample of electron-positron collisions collected in 2019 and 2020 at the $Υ(4S)$ resonance and corresponding to $34.6$\,fb$^{-1}$ of integrated luminosity. We use simulation to determine optimized event selections. The $ΔE$ distrib… ▽ More We report on first measurements of branching fractions~($\mathcal{B}$) and CP-violating charge asymmetries~($\mathcal{A}$) in charmless $B$ decays at Belle~II. We use a sample of electron-positron collisions collected in 2019 and 2020 at the $Υ(4S)$ resonance and corresponding to $34.6$\,fb$^{-1}$ of integrated luminosity. We use simulation to determine optimized event selections. The $ΔE$ distributions of the resulting samples, restricted in $M_{\rm bc}$, are fit to determine signal yields. Signal yields are corrected for efficiencies determined from simulation and control data samples to obtain branching fractions and CP-violating asymmetries for flavour-specific channels. These are the first measurements in charmless decays reported by Belle~II. Results are compatible with known determinations and show detector performance comparable with the best Belle results offering a reliable basis to assess projections for future reach. △ Less

Submitted 20 September, 2020; originally announced September 2020.

Comments: 33 pages, 22 figures. Supporting material for Summer 2020 conferences

Measurement of Hadronic Mass Moments $\langle M_X^n \rangle $ in $B \rightarrow X_c \ell ν$ Decays at Belle II

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (518 additional authors not shown)

Abstract: We present measurements of the first six hadronic mass moments in semileptonic $B \rightarrow X_c \ell ν$ decays. The hadronic mass moments, together with other observables of inclusive $B$ decays, can be used to determine the CKM matrix element $|{V_{cb}}|$ and mass of the $b$-quark $m_b$ in the context of Heavy Quark Expansions of QCD. The Belle~II data recorded at the $Υ(4S)$ resonance in 2019… ▽ More We present measurements of the first six hadronic mass moments in semileptonic $B \rightarrow X_c \ell ν$ decays. The hadronic mass moments, together with other observables of inclusive $B$ decays, can be used to determine the CKM matrix element $|{V_{cb}}|$ and mass of the $b$-quark $m_b$ in the context of Heavy Quark Expansions of QCD. The Belle~II data recorded at the $Υ(4S)$ resonance in 2019 and 2020 (March-July), corresponding to an integrated luminosity of $34.6\;\mathrm{fb}^{-1}$, is used for this measurement. The decay $Υ(4S) \rightarrow B \overline{B}$ is reconstructed by applying the hadronic tagging algorithm provided by the Full Event Interpretation to fully reconstruct one $B$ meson. The second $B$ meson is reconstructed inclusively by selecting a high-momentum lepton. The $X_c$ system is identified by the remaining reconstructed tracks and clusters in the electromagnetic calorimeter. We report preliminary results for the hadronic mass moments $\langle M_X^n \rangle $ with $n=1,\dots,6$, measured as a function of a lower cut on the lepton momentum in the signal $B$ rest frame. △ Less

Submitted 9 September, 2020; originally announced September 2020.

Measurement of the semileptonic $\bar{B}^0 \to D^{*+} \ell^{-} ν_{\ell}$ branching fraction with fully reconstructed $B$ meson decays and 34.6 fb$^{-1}$of Belle II data

Authors: Belle II Collaboration, F. Abudinen, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, K. Amirie, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich , et al. (518 additional authors not shown)

Abstract: We present a first measurement of the $\bar{B^{0}} \rightarrow D^{*+} \ell^{-} ν_{\ell}$ branching fraction using fully reconstructed $B$ meson decays employing the Full Event Interpretation algorithm. Collision events corresponding to an integrated luminosity of \lumi are analyzed, which were recorded by the Belle~II detector operated at the SuperKEKB accelerator complex. We measure… ▽ More We present a first measurement of the $\bar{B^{0}} \rightarrow D^{*+} \ell^{-} ν_{\ell}$ branching fraction using fully reconstructed $B$ meson decays employing the Full Event Interpretation algorithm. Collision events corresponding to an integrated luminosity of \lumi are analyzed, which were recorded by the Belle~II detector operated at the SuperKEKB accelerator complex. We measure$\cal{B}(\bar{B^{0}} \rightarrow D^{*+} \ell^{-} ν_{\ell}) =4.51 \pm 0.41_{stat}\pm0.27_{syst} \pm0.45_{π_s}$, with the first and second error denoting the statistical and systematic uncertainty, respectively, and the third dominant uncertainty is from the slow pion reconstruction efficiency. △ Less

Submitted 16 September, 2020; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: 15 pages, 4 figures, ICHEP 2020

Exclusive $B^0 \to π^- \ell^+ ν_\ell$ Decays with Hadronic Full Event Interpretation Tagging in 34.6 fb$^{-1}$ of Belle II Data

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (519 additional authors not shown)

Abstract: We present the results of the re-discovery of the decay $B^0 \to π^- \ell^+ ν_\ell$ in 34.6 fb$^{-1}$ of Belle II data using hadronic $B$-tagging via the Full Event Interpretation algorithm. We observe 21 signal events on a background of 155 in a fit to the distribution of the square of the missing mass, $M_{\mathrm{miss}}^2$, with a significance of 5.69$σ$, and determine a total branching fractio… ▽ More We present the results of the re-discovery of the decay $B^0 \to π^- \ell^+ ν_\ell$ in 34.6 fb$^{-1}$ of Belle II data using hadronic $B$-tagging via the Full Event Interpretation algorithm. We observe 21 signal events on a background of 155 in a fit to the distribution of the square of the missing mass, $M_{\mathrm{miss}}^2$, with a significance of 5.69$σ$, and determine a total branching fraction of (1.58 $\pm$ 0.43$_{\mathrm{stat}}$ $\pm$ 0.07$_{\mathrm{sys}}$) $\times 10^{-4}$. △ Less

Submitted 20 August, 2020; originally announced August 2020.

Studies of the semileptonic $\bar B^0\to D^{*+}\ell^-\barν_\ell$ and $B^-\to D^{0}\ell^-\barν_\ell$ decay processes with 34.6 fb$^{-1}$ of Belle II data

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (520 additional authors not shown)

Abstract: We report measurements of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ and $B^- \to D^{0} \ell^{-} \barν_l$ processes using 34.6 fb$^{-1}$ of collision events recorded by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. For the $B^-\to D^{0}\ell^-\barν_\ell$ channel, we present first studies that isolate this decay from other semileptonic processes and backgrounds. We… ▽ More We report measurements of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ and $B^- \to D^{0} \ell^{-} \barν_l$ processes using 34.6 fb$^{-1}$ of collision events recorded by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. For the $B^-\to D^{0}\ell^-\barν_\ell$ channel, we present first studies that isolate this decay from other semileptonic processes and backgrounds. We report a measurement of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ branching fraction and obtain ${\cal B}(\bar{B}^0 \to D^{*+} \ell^{-} \barν_l) = \left(4.60 \pm 0.05_{\mathrm{stat}}\pm0.17_{\mathrm{syst}} \pm 0.45_{π_s}\right) \%$, in agreement with the world average. Here, the uncertainties are statistical, systematic, and related to slow pion reconstruction, respectively. The systematic uncertainties are limited by the statistics of auxiliary measurements and will improve in the future. We also report differential branching fractions in five bins of the hadronic recoil parameter $w$ for $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$, unfolded to account for resolution and efficiency effects. △ Less

Submitted 18 August, 2020; v1 submitted 17 August, 2020; originally announced August 2020.

Comments: 19 pages, 6 figures

Report number: BELLE2-CONF-PH-2020-008

A calibration of the Belle II hadronic tag-side reconstruction algorithm with $B \rightarrow X\ell ν$ decays

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (518 additional authors not shown)

Abstract: Tag-side reconstruction is an important method for reconstructing $B$ meson decays with missing energy. The Belle II tag-side reconstruction algorithm, Full Event Interpretation, relies on a hierarchical reconstruction of $B$ meson decays with multivariate classification employed at each stage of reconstruction. Given the large numbers of classifiers employed and decay chains reconstructed, the pe… ▽ More Tag-side reconstruction is an important method for reconstructing $B$ meson decays with missing energy. The Belle II tag-side reconstruction algorithm, Full Event Interpretation, relies on a hierarchical reconstruction of $B$ meson decays with multivariate classification employed at each stage of reconstruction. Given the large numbers of classifiers employed and decay chains reconstructed, the performance of the algorithm on data and simulation differs significantly. Here, calibration factors are derived for hadronic tag-side $B$ decays by measuring a signal side decay, $B \rightarrow X\ell ν$, in $34.6$ fb$^{-1}$ of Belle II data. For a very loose selection on the tag-side $B$ multivariate classifier, the calibration factors are $0.65 \pm 0.02$ and $0.83 \pm 0.03$ for tag-side $B^{+}$ and $B^{0}$ mesons, respectively. △ Less

Submitted 17 August, 2020; v1 submitted 13 August, 2020; originally announced August 2020.

$τ$ lepton mass measurement at Belle II

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (517 additional authors not shown)

Abstract: The reconstruction of tau-pair production, $e^{+}e^{-} \to τ^{+}τ^{-}$, from the subsequent 3-prong ($τ^{+} \rightarrow π^{+} π^{-} π^{+} \barν_τ$) and 1-prong ($τ^{-} \to \ell^{-} \barν_{\ell} ν_τ$, $τ^{-} \to h^{-} ν_τ$ or $τ^{-} \to π^{-} π^0 ν_τ$) decays, is presented using 8.8 fb$^{-1}$ of $e^{+}e^{-}$ collision data of Belle II at the center-of-mass energy $\sqrt{s} = m_{Υ(4S)}$. The pseudom… ▽ More The reconstruction of tau-pair production, $e^{+}e^{-} \to τ^{+}τ^{-}$, from the subsequent 3-prong ($τ^{+} \rightarrow π^{+} π^{-} π^{+} \barν_τ$) and 1-prong ($τ^{-} \to \ell^{-} \barν_{\ell} ν_τ$, $τ^{-} \to h^{-} ν_τ$ or $τ^{-} \to π^{-} π^0 ν_τ$) decays, is presented using 8.8 fb$^{-1}$ of $e^{+}e^{-}$ collision data of Belle II at the center-of-mass energy $\sqrt{s} = m_{Υ(4S)}$. The pseudomass technique developed by the ARGUS experiment is used to measure the $τ$-lepton mass $m_τ$ in the 3-prong $τ^{+} \to π^{+} π^{-} π^{+} \barν_τ $ decay, resulting in $m_τ = 1777.28 \pm 0.75~{\rm (stat.)} \pm 0.33 ~{\rm (sys.)}~{\rm{MeV}/\rm{c}^2}$. △ Less

Submitted 9 March, 2021; v1 submitted 11 August, 2020; originally announced August 2020.

Report number: BELLE2-CONF-PH-2020-010

Rediscovery of $B \to φK^{(*)}$ decays and measurement of the longitudinal polarization fraction $f_L$ in $B \to φK^{*}$ decays using the Summer 2020 Belle II dataset

Authors: F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade, Sw. Banerjee , et al. (516 additional authors not shown)

Abstract: We utilize a sample of 34.6 fb$^{-1}$, collected by the Belle II experiment at the SuperKEKB asymmetric energy $e^+e^-$ collider, to search for the $B^+ \to φK^+$, $B^+ \to φK^{*+}$, $B^0 \to φK^0_S$, and $B^0 \to φK^{*0}$ decays. Charmless hadronic $B$ decays represent an important part of the Belle II physics program, and are an ideal benchmark to test the detector capabilities in terms of track… ▽ More We utilize a sample of 34.6 fb$^{-1}$, collected by the Belle II experiment at the SuperKEKB asymmetric energy $e^+e^-$ collider, to search for the $B^+ \to φK^+$, $B^+ \to φK^{*+}$, $B^0 \to φK^0_S$, and $B^0 \to φK^{*0}$ decays. Charmless hadronic $B$ decays represent an important part of the Belle II physics program, and are an ideal benchmark to test the detector capabilities in terms of tracking efficiency, charged particle identification, vertexing, and advanced analysis techniques. Each channel is observed with a significance that exceeds 5 standard deviations, and we obtain measurements of their branching ratios that are in good agreement with the world averages. For the $B \to φK^*$ modes, we also perform a measurement of the longitudinal polarization fraction $f_L$. △ Less

Submitted 9 August, 2020; originally announced August 2020.

Comments: 19 pages, 6 figures

Report number: BELLE2-CONF-PH-2020-006

First flavor tagging calibration using 2019 Belle II data

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (518 additional authors not shown)

Abstract: We report on the first calibration of the standard Belle II $B$-flavor tagger using the full data set collected at the $Υ(4{\rm S})$ resonance in 2019 with the Belle II detector at the SuperKEKB collider, corresponding to 8.7 fb$^{-1}$ of integrated luminosity. The calibration is performed by reconstructing various hadronic charmed $B$-meson decays with flavor-specific final states. We use simulat… ▽ More We report on the first calibration of the standard Belle II $B$-flavor tagger using the full data set collected at the $Υ(4{\rm S})$ resonance in 2019 with the Belle II detector at the SuperKEKB collider, corresponding to 8.7 fb$^{-1}$ of integrated luminosity. The calibration is performed by reconstructing various hadronic charmed $B$-meson decays with flavor-specific final states. We use simulation to optimize our event selection criteria and to train the flavor tagging algorithm. We determine the tagging efficiency and the fraction of wrongly identified tag-side $B$~candidates from a measurement of the time-integrated $B^0-\overline{B}^0$ mixing probability. The total effective efficiency is measured to be $\varepsilon_{\rm eff} = \big(33.8 \pm 3.6(\text{stat}) \pm 1.6(\text{sys})\big)\%$, which is in good agreement with the predictions from simulation and comparable with the best one obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a basis for future calibrations. △ Less

Submitted 6 August, 2020; originally announced August 2020.

Comments: 28 pages, 10 figures

Report number: BELLE2-CONF-PH-2020-004

Charmless $B$ decay reconstruction in 2019 Belle II data

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (511 additional authors not shown)

Abstract: We report on the reconstruction of various charmless $B$ decays from electron-positron collisions at the energy corresponding to the $Υ(4S)$ resonance collected with the Belle II detector at the SuperKEKB collider. We use simulation to devise optimized event selections and apply them to the full data set collected in 2019, corresponding to 8.7\,fb$^{-1}$ of integrated luminosity. We fit the differ… ▽ More We report on the reconstruction of various charmless $B$ decays from electron-positron collisions at the energy corresponding to the $Υ(4S)$ resonance collected with the Belle II detector at the SuperKEKB collider. We use simulation to devise optimized event selections and apply them to the full data set collected in 2019, corresponding to 8.7\,fb$^{-1}$ of integrated luminosity. We fit the difference between half of the collision energy and the $B$ candidate energy (in the $Υ(4S)$ frame) for events restricted to a signal-rich range in beam-energy-constrained mass to search for charmless signals. Signal yields of approximately 80, 15, 20, 30, 90, and 160 decays are reconstructed for the channels $B^0 \to K^+π^-$, $B^0 \to π^+π^-$, $B^+ \to K^0_S(\to π^+π^-)π^+$, $B^+ \to K^+π^0(\to γγ)$, $B^+ \to K^+K^-K^+$, and $B^+ \to K^+π^-π^+$, respectively. Yields and background contaminations are compatible with those expected from simulation and comparable with those obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a reliable basis to assess projections for future reach. △ Less

Submitted 4 June, 2020; v1 submitted 27 May, 2020; originally announced May 2020.

Comments: 17 pages, 7 figures, conference note approved for winter/spring 2020 conferences

Measurement of the $B^0$ lifetime using fully reconstructed hadronic decays in the 2019 Belle II dataset

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (512 additional authors not shown)

Abstract: This document presents the measurement of $B^0$ meson lifetimes using the 2019 Belle II dataset that corresponds to an integrated luminosity of $8.7 \pm 0.2$ fb$^{-1}$. Each candidate is fully reconstructed with hadronic decay final states on the signal side, while the rest-of-event technique allows to infer the decay vertex position on the other (tag) side. $B^0$ lifetime is extracted from an unb… ▽ More This document presents the measurement of $B^0$ meson lifetimes using the 2019 Belle II dataset that corresponds to an integrated luminosity of $8.7 \pm 0.2$ fb$^{-1}$. Each candidate is fully reconstructed with hadronic decay final states on the signal side, while the rest-of-event technique allows to infer the decay vertex position on the other (tag) side. $B^0$ lifetime is extracted from an unbinned maximum likelihood fit to the distribution of the difference between the signal side $B^0$ candidate and the tag side decay times. The measured lifetime is $τ_{B^0} = 1.48 \pm 0.28 \pm 0.06 $ ps, where the first uncertainty is statistical and the second is systematic. △ Less

Submitted 21 May, 2020; v1 submitted 15 May, 2020; originally announced May 2020.

Comments: 16 pages, 5 figures

Report number: BELLE2-CONF-PH-2020-003

Measurement of the branching fraction ${\cal B}(\bar B^0\to D^{*+}\ell^-\barν_\ell)$ with early Belle II data

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, R. Adak, K. Adamczyk, P. Ahlburg, J. K. Ahn, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, V. Aulchenko, T. Aushev, V. Aushev, T. Aziz, V. Babu, S. Bacher, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade , et al. (511 additional authors not shown)

Abstract: We measure the branching fractions for the decays $\bar{B}^0 \to D^{*+} e^{-} \barν_e$ and $\bar{B}^0 \to D^{*+} μ^{-} \barν_μ$ using $8.70 \pm 0.09~{\rm fb}^{-1}$ of data collected by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. Candidate signal decays are reconstructed with the subsequent decays $D^{*+}\to D^0 π^+$ and $D^0\to K^-π^+$. We obtain the results… ▽ More We measure the branching fractions for the decays $\bar{B}^0 \to D^{*+} e^{-} \barν_e$ and $\bar{B}^0 \to D^{*+} μ^{-} \barν_μ$ using $8.70 \pm 0.09~{\rm fb}^{-1}$ of data collected by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. Candidate signal decays are reconstructed with the subsequent decays $D^{*+}\to D^0 π^+$ and $D^0\to K^-π^+$. We obtain the results ${\cal B}(\bar{B}^0 \to D^{*+} e^{-} \barν_e)$ = $(4.55\pm0.14(\mathrm{stat})\pm0.35 (\mathrm{syst})) \%$ and ${\cal B}(\bar{B}^0 \to D^{*+} μ^{-} \barν_μ)$ = $(4.84\pm 0.13(\mathrm{stat})\pm0.37(\mathrm{syst})) \%$, in agreement with the world averages. The measurements serve to validate the full chain of detector operation and calibration, data collection and processing, and production of physics results in the case of semileptonic $B$-meson decays. △ Less

Submitted 12 June, 2020; v1 submitted 20 April, 2020; originally announced April 2020.

Comments: 17 pages, 2 figures, minor correction added

Report number: BELLE2-CONF-PH-2020-002

Measurement of the integrated luminosity of the Phase 2 data of the Belle II experiment

Authors: Belle II Collaboration, F. Abudinén, I. Adachi, P. Ahlburg, H. Aihara, N. Akopov, A. Aloisio, F. Ameli, L. Andricek, N. Anh Ky, D. M. Asner, H. Atmacan, T. Aushev, V. Aushev, T. Aziz, K. Azmi, V. Babu, S. Baehr, S. Bahinipati, A. M. Bakich, P. Bambade, Sw. Banerjee, S. Bansal, V. Bansal, M. Barrett , et al. (398 additional authors not shown)

Abstract: From April to July 2018, a data sample at the peak energy of the $Υ(4S)$ resonance was collected with the Belle~II detector at the SuperKEKB electron-positron collider. This is the first data sample of the Belle~II experiment. Using Bhabha and digamma events, we measure the integrated luminosity of the data sample to be ($496.3 \pm 0.3 \pm 3.0$)~pb$^{-1}$, where the first uncertainty is statistica… ▽ More From April to July 2018, a data sample at the peak energy of the $Υ(4S)$ resonance was collected with the Belle~II detector at the SuperKEKB electron-positron collider. This is the first data sample of the Belle~II experiment. Using Bhabha and digamma events, we measure the integrated luminosity of the data sample to be ($496.3 \pm 0.3 \pm 3.0$)~pb$^{-1}$, where the first uncertainty is statistical and the second is systematic. This work provides a basis for future luminosity measurements at Belle~II. △ Less

Submitted 3 December, 2019; v1 submitted 11 October, 2019; originally announced October 2019.

Comments: 12 pages, 2 figures, the first Belle II Collaboration paper, to be published in Chinese Physics C

Report number: Belle II Preprint 2019-001; KEK Preprint 2019-44

Journal ref: Chinese Phys. C 44, 021001 (2020)

Assessment of Transverse Instabilities in Proton Driven Hollow Plasma Wakefield Acceleration

Authors: Y. M. Li, G. X. Xia, Y. Zhao

Abstract: Hollow plasma has been introduced into the proton-driven plasma wakefield accelerators to overcome the issue of beam quality degradation caused by the nonlinear transverse wakefields varying in radius and time in uniform plasma. It has been demonstrated in simulations that the electrons can be accelerated to energy frontier with well-preserved beam quality in a long hollow plasma channel. However,… ▽ More Hollow plasma has been introduced into the proton-driven plasma wakefield accelerators to overcome the issue of beam quality degradation caused by the nonlinear transverse wakefields varying in radius and time in uniform plasma. It has been demonstrated in simulations that the electrons can be accelerated to energy frontier with well-preserved beam quality in a long hollow plasma channel. However, this scheme imposes tight requirements on the beam-channel alignment. Otherwise asymmetric transverse wakefields along the axis are induced, which could distort the driving bunch and deteriorate the witness beam quality. In this paper, by means of the 2D cartesian particle-in-cell simulations, we examine the potentially detrimental effects induced by the driving beam-channel offset and initial driver tilt, and then propose and assess the solutions to these driver inaccuracy issues. △ Less

Submitted 8 May, 2018; originally announced May 2018.

Comments: 4 pages, 4 figures

The Timepix Telescope for High Performance Particle Tracking

Authors: Kazuyoshi Akiba, Per Arne Ronning, Martin van Beuzekom, Vincent van Beveren, Silvia Borghi, Henk Boterenbrood, Jan Buytaert, Paula Collins, Alvaro Dosil Suarez, Raphael Dumps, Lars Eklund, Daniel Esperante, Abraham Gallas, Hamish Gordon, Bas van der Heijden, Christoph Hombach, Daniel Hynds, Malcolm John, Alexander Leflat, Yi Ming Li, Ian Longstaff, Alexander Morton, Noritsugu Nakatsuka, Andre Nomerotski, Chris Parkes , et al. (10 additional authors not shown)

Abstract: The Timepix particle tracking telescope has been developed as part of the LHCb VELO Upgrade project, supported by the Medipix Collaboration and the AIDA framework. It is a primary piece of infrastructure for the VELO Upgrade project and is being used for the development of new sensors and front end technologies for several upcoming LHC trackers and vertexing systems. The telescope is designed arou… ▽ More The Timepix particle tracking telescope has been developed as part of the LHCb VELO Upgrade project, supported by the Medipix Collaboration and the AIDA framework. It is a primary piece of infrastructure for the VELO Upgrade project and is being used for the development of new sensors and front end technologies for several upcoming LHC trackers and vertexing systems. The telescope is designed around the dual capability of the Timepix ASICs to provide information about either the deposited charge or the timing information from tracks traversing the 14 x 14mm matrix of 55 x 55 um pixels. The rate of reconstructed tracks available is optimised by taking advantage of the shutter driven readout architecture of the Timepix chip, operated with existing readout systems. Results of tests conducted in the SPS North Area beam facility at CERN show that the telescope typically provides reconstructed track rates during the beam spills of between 3.5 and 7.5 kHz, depending on beam conditions. The tracks are time stamped with 1 ns resolution with an efficiency of above 98% and provide a pointing resolution at the centre of the telescope of 1.6 um . By dropping the time stamping requirement the rate can be increased to 15 kHz, at the expense of a small increase in background. The telescope infrastructure provides CO2 cooling and a flexible mechanical interface to the device under test, and has been used for a wide range of measurements during the 2011-2012 data taking campaigns. △ Less

Submitted 18 April, 2013; originally announced April 2013.

Comments: 14 pages, 9 figures

Inverse Folding of RNA Pseudoknot Structures

Authors: James Z. M. Gao, Linda Y. M. Li, Christian M. Reidys

Abstract: Background: RNA exhibits a variety of structural configurations. Here we consider a structure to be tantamount to the noncrossing Watson-Crick and \pairGU-base pairings (secondary structure) and additional cross-serial base pairs. These interactions are called pseudoknots and are observed across the whole spectrum of RNA functionalities. In the context of studying natural RNA structures, searchi… ▽ More Background: RNA exhibits a variety of structural configurations. Here we consider a structure to be tantamount to the noncrossing Watson-Crick and \pairGU-base pairings (secondary structure) and additional cross-serial base pairs. These interactions are called pseudoknots and are observed across the whole spectrum of RNA functionalities. In the context of studying natural RNA structures, searching for new ribozymes and designing artificial RNA, it is of interest to find RNA sequences folding into a specific structure and to analyze their induced neutral networks. Since the established inverse folding algorithms, {\tt RNAinverse}, {\tt RNA-SSD} as well as {\tt INFO-RNA} are limited to RNA secondary structures, we present in this paper the inverse folding algorithm {\tt Inv} which can deal with 3-noncrossing, canonical pseudoknot structures. Results: In this paper we present the inverse folding algorithm {\tt Inv}. We give a detailed analysis of {\tt Inv}, including pseudocodes. We show that {\tt Inv} allows to design in particular 3-noncrossing nonplanar RNA pseudoknot 3-noncrossing RNA structures--a class which is difficult to construct via dynamic programming routines. {\tt Inv} is freely available at \url{http://www.combinatorics.cn/cbpc/inv.html}. Conclusions: The algorithm {\tt Inv} extends inverse folding capabilities to RNA pseudoknot structures. In comparison with {\tt RNAinverse} it uses new ideas, for instance by considering sets of competing structures. As a result, {\tt Inv} is not only able to find novel sequences even for RNA secondary structures, it does so in the context of competing structures that potentially exhibit cross-serial interactions. △ Less

Submitted 9 March, 2010; originally announced March 2010.

Comments: 19 pages,26 figures

Report number: 0905.0733 0905.0733 0905.0733 0905.0733

Inverse folding of RNA pseudoknot structures

Authors: James Z. M. Gao, Linda Y. M. Li, Christian M. Reidys

Abstract: Background: RNA exhibits a variety of structural configurations. Here we consider a structure to be tantamount to the noncrossing Watson-Crick and \pairGU-base pairings (secondary structure) and additional cross-serial base pairs. These interactions are called pseudoknots and are observed across the whole spectrum of RNA functionalities. In the context of studying natural RNA structures, searc… ▽ More Background: RNA exhibits a variety of structural configurations. Here we consider a structure to be tantamount to the noncrossing Watson-Crick and \pairGU-base pairings (secondary structure) and additional cross-serial base pairs. These interactions are called pseudoknots and are observed across the whole spectrum of RNA functionalities. In the context of studying natural RNA structures, searching for new ribozymes and designing artificial RNA, it is of interest to find RNA sequences folding into a specific structure and to analyze their induced neutral networks. Since the established inverse folding algorithms, {\tt RNAinverse}, {\tt RNA-SSD} as well as {\tt INFO-RNA} are limited to RNA secondary structures, we present in this paper the inverse folding algorithm {\tt Inv} which can deal with 3-noncrossing, canonical pseudoknot structures. Results: In this paper we present the inverse folding algorithm {\tt Inv}. We give a detailed analysis of {\tt Inv}, including pseudocodes. We show that {\tt Inv} allows to design in particular 3-noncrossing nonplanar RNA pseudoknot 3-noncrossing RNA structures-a class which is difficult to construct via dynamic programming routines. {\tt Inv} is freely available at \url{http://www.combinatorics.cn/cbpc/inv.html}. Conclusions: The algorithm {\tt Inv} extends inverse folding capabilities to RNA pseudoknot structures. In comparison with {\tt RNAinverse} it uses new ideas, for instance by considering sets of competing structures. As a result, {\tt Inv} is not only able to find novel sequences even for RNA secondary structures, it does so in the context of competing structures that potentially exhibit cross-serial interactions. △ Less

Submitted 10 March, 2010; v1 submitted 5 May, 2009; originally announced May 2009.

Comments: 20 pages, 26 figures

MSC Class: 05B30

Test of Cosmic Spatial Isotropy for Polarized Electrons Using a Rotatable Torsion Balance

Authors: Li-Shing Hou, Wei-Tou Ni, Yu-Chu M. Li

Abstract: To test the cosmic spatial isotropy, we use a rotatable torsion balance carrying a transversely spin-polarized ferrimagnetic Dy_{6}Fe_{23} mass. With a rotation period of one hour, the period of anisotropy signal is reduced from one sidereal day by about 24 times, and hence the 1/f noise is greatly reduced. Our present experimental results constrain the cosmic anisotropy Hamiltonian H = C_{1} si… ▽ More To test the cosmic spatial isotropy, we use a rotatable torsion balance carrying a transversely spin-polarized ferrimagnetic Dy_{6}Fe_{23} mass. With a rotation period of one hour, the period of anisotropy signal is reduced from one sidereal day by about 24 times, and hence the 1/f noise is greatly reduced. Our present experimental results constrain the cosmic anisotropy Hamiltonian H = C_{1} sigma_{1} + C_{2} sigma_{2} + C_{3} sigma_{3} (sigma_{3} is in the axis of earth rotation) to (C_{1}^{2} +C_{2}^{2})^{1/2} = (1.8 +- 5.3) X 10^{-21} eV and | C_{3} | = (1.2 +- 3.5) X 10^{-19} eV. This improves the previous limits on (C_{1},C_{2}) by 120 times and C_{3} by a factor of 800. △ Less

Submitted 3 September, 2000; originally announced September 2000.

Comments: 6 pages, 3 figures

Report number: GP-106-1

Journal ref: Phys.Rev.Lett.90:201101,2003

Analytical Results for a Hole in an Antiferromagnet

Authors: Y. M. Li, N. d'Ambrumenil, L. Yu, Z. B. Su

Abstract: The Green's function for a hole moving in an antiferromagnet is derived analytically in the long-wavelength limit. We find that the infrared divergence is eliminated in two and higher dimensions so that the quasiparticle weight is finite. Our results also suggest that the hole motion is polaronic in nature with a bandwidth proportional to $t/J \exp [-c (t/J)^2] $ ($c$ is a constant). The connect… ▽ More The Green's function for a hole moving in an antiferromagnet is derived analytically in the long-wavelength limit. We find that the infrared divergence is eliminated in two and higher dimensions so that the quasiparticle weight is finite. Our results also suggest that the hole motion is polaronic in nature with a bandwidth proportional to $t/J \exp [-c (t/J)^2] $ ($c$ is a constant). The connection of the long-wavelength approximation to the first-order approximation in the cumulant expansion is also clarified. △ Less

Submitted 17 January, 1996; originally announced January 1996.

Comments: 12 papes, 2 figures available upon request, revtex

Bosonization for 2D Interacting Fermion Systems: Non-Fermi Liquid Behavior

Authors: Y. Yu, Y. M. Li, N. d'Ambrumenil

Abstract: Non-Fermi liquid behavior is found for the first time in a two-dimensional (2D) system with non-singular interactions using Haldane's bosonization scheme. The bosonized system is solved exactly by a generalized Bogoliubov transformation. The fermion momentum distribution, calculated using a generalized Mattis-Lieb technique, exhibits a non-universal power law in the vicinity of the Fermi surface… ▽ More Non-Fermi liquid behavior is found for the first time in a two-dimensional (2D) system with non-singular interactions using Haldane's bosonization scheme. The bosonized system is solved exactly by a generalized Bogoliubov transformation. The fermion momentum distribution, calculated using a generalized Mattis-Lieb technique, exhibits a non-universal power law in the vicinity of the Fermi surface for intermediate interaction strengths. △ Less

Submitted 11 January, 1994; originally announced January 1994.

Comments: 13 pages, 2 figures upon request, latex. (to appear in Mod. Phys. Lett. B)

A partition functional and thermodynamic properties of the infinite-dimensional Hubbard model

Authors: Y. M. Li, N. d'Ambrumenil

Abstract: An approximate partition functional is derived for the infinite-dimensional Hubbard model. This functional naturally includes the exact solution of the Falicov-Kimball model as a special case, and is exact in the uncorrelated and atomic limits. It explicitly keeps spin-symmetry. For the case of the Lorentzian density of states, we find that the Luttinger theorem is satisfied at zero temperature.… ▽ More An approximate partition functional is derived for the infinite-dimensional Hubbard model. This functional naturally includes the exact solution of the Falicov-Kimball model as a special case, and is exact in the uncorrelated and atomic limits. It explicitly keeps spin-symmetry. For the case of the Lorentzian density of states, we find that the Luttinger theorem is satisfied at zero temperature. The susceptibility crosses over smoothly from that expected for an uncorrelated state with antiferromagnetic fluctuations at high temperature to a correlated state at low temperature via a Kondo-type anomaly at a characteristic temperature $T^\star$. We attribute this anomaly to the appearance of the Hubbard pseudo-gap. The specific heat also shows a peak near $T^\star$. The resistivity goes to zero at zero temperature, in contrast to other approximations, rises sharply around $T^\star$ and has a rough linear temperature dependence above $T^\star$. △ Less

Submitted 11 January, 1994; originally announced January 1994.

Comments: 18 pages, 6 figures upon request, latex, (to appear in Phys. Rev. B)