-
Giant segregation transition as origin of liquid metal embrittlement in the Fe-Zn system
Authors:
Reza Darvishi Kamachali,
Theophilus Wallis,
Yuki Ikeda,
Ujjal Saikia,
Ali Ahmadian,
Christian H. Liebscher,
Tilmann Hickel,
Robert Maaß
Abstract:
A giant Zn segregation transition is revealed using CALPHAD-integrated density-based modelling of segregation into Fe grain boundaries (GBs). The results show that above a threshold of only a few atomic percent Zn in the alloy, a substantial amount of up to 60 at.\% Zn can segregate to the GB. We found that the amount of segregation abruptly increases with decreasing temperature, while the Zn cont…
▽ More
A giant Zn segregation transition is revealed using CALPHAD-integrated density-based modelling of segregation into Fe grain boundaries (GBs). The results show that above a threshold of only a few atomic percent Zn in the alloy, a substantial amount of up to 60 at.\% Zn can segregate to the GB. We found that the amount of segregation abruptly increases with decreasing temperature, while the Zn content in the alloy required for triggering the segregation transition decreases. Direct evidence of the Zn segregation transition is obtained using high-resolution scanning transmission electron microscopy. Base on the model, we trace the origin of the segregation transition back to the low cohesive energy of Zn and a miscibility gap in Fe-Zn GB, arising from the magnetic ordering effect, which is confirmed by ab-initio calculations. We also show that the massive Zn segregation resulting from the segregation transition greatly assists with liquid wetting and reduces the work of separation along the GB. The current predictions suggest that control over Zn segregation, by both alloy design and optimizing the galvanization and welding processes, may offer preventive strategies against liquid metal embrittlement.
△ Less
Submitted 31 August, 2023; v1 submitted 26 April, 2023;
originally announced April 2023.
-
Glass fracture surface energy calculated from crystal structure and bond-energy data
Authors:
Marco Holzer,
Tina Waurischk,
Janine George,
Robert Maaß,
Ralf Müller
Abstract:
We present a novel method to predict the fracture surface energy, γ, of isochemically crystallizing silicate glasses using readily available crystallographic structure data of their crystalline counterpart and tabled diatomic chemical bond energies, D0. The method assumes that γ equals the fracture surface energy of the most likely cleavage plane of the crystal. Calculated values were in excellent…
▽ More
We present a novel method to predict the fracture surface energy, γ, of isochemically crystallizing silicate glasses using readily available crystallographic structure data of their crystalline counterpart and tabled diatomic chemical bond energies, D0. The method assumes that γ equals the fracture surface energy of the most likely cleavage plane of the crystal. Calculated values were in excellent agreement with those calculated from glass density, network connectivity and D0 data in earlier work. This finding demonstrates a remarkable equivalence between crystal cleavage planes and glass fracture surfaces.
△ Less
Submitted 15 November, 2023; v1 submitted 21 April, 2023;
originally announced April 2023.
-
Shear-band cavitation determines the shape of the stress-strain curve of metallic glasses
Authors:
A. Das,
C. Ott,
D. Pechimuthu,
R. Moosavi,
M. Stoica,
P. M. Derlet,
R. Maass
Abstract:
Metallic glasses are known to have a remarkably robust yield strength, admitting Weibull moduli as high as for crystalline engineering alloys. However, their post-yielding behavior is strongly varying, with large scatter in both flow stress levels and strains at failure. Using x-ray tomography we reveal for the first time how a strain-dependent internal evolution of shear-band cavities underlies t…
▽ More
Metallic glasses are known to have a remarkably robust yield strength, admitting Weibull moduli as high as for crystalline engineering alloys. However, their post-yielding behavior is strongly varying, with large scatter in both flow stress levels and strains at failure. Using x-ray tomography we reveal for the first time how a strain-dependent internal evolution of shear-band cavities underlies this unpredictable post yielding response. We demonstrate how macroscopic strain-softening coincides with the first detection of internal shear-band cavitation. Cavity growth during plastic flow is found to follow a power-law, which yields a fractal dimension and a roughness exponent in excellent agreement with self-similar surface properties obtained after fracture. These findings demonstrate how internal micro-cracking coexists with shear-band plasticity along the plastic part of a stress-strain curve, rationalizing the large variability of plastic flow behavior seen for metallic glasses.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Micro-plasticity in a fragile model binary glass
Authors:
P. M. Derlet,
R. Maass
Abstract:
Atomistic deformation simulations in the nominally elastic regime are performed for a model binary glass with strain rates as low as $10^{4}$/sec (corresponding to 0.01 shear strain per 1$μ$sec). A robust elasticity is revealed that exhibits only minor elastic softening, despite quite different degrees of structural relaxation occurring over the four orders of magnitude strain rates considered. A…
▽ More
Atomistic deformation simulations in the nominally elastic regime are performed for a model binary glass with strain rates as low as $10^{4}$/sec (corresponding to 0.01 shear strain per 1$μ$sec). A robust elasticity is revealed that exhibits only minor elastic softening, despite quite different degrees of structural relaxation occurring over the four orders of magnitude strain rates considered. A closer inspection of the atomic-scale structure indicates the material response is distinctly different for two types of local atomic environments. A system spanning iscosahedrally coordinated substructure responds purely elastically, whereas the remaining substructure also admits microplastic evolution. This leads to a heterogeneous internal stress distribution which, upon unloading, results in negative creep and complete residual-strain recovery. A detailed structural analysis in terms of local stress, atomic displacement, and SU(2) local bonding topology shows such microscopic processes can result in large changes in local stress and are more likely to occur in geometrically frustrated regions characterized by higher free volume and softer elastic stiffness. These insights shed atomistic light onto the structural origins that may govern recent experimental observations of significant structural evolution in response to elastic loading protocols.
△ Less
Submitted 5 November, 2020;
originally announced November 2020.
-
Emergent structural length scales in a model binary glass --- the micro-second molecular dynamics time-scale regime
Authors:
Peter M Derlet,
Robert Maass
Abstract:
It is now possible to routinely perform atomistic simulations at the microsecond timescale. In the present work, we exploit this for a model binary Lennard-Jones glass to study structural relaxation at a timescale spanning up to 80 microseconds. It is found that at these longer time-scales, significant mobility and relaxation occurs, demonstrating a reproducible relaxation trajectory towards a cla…
▽ More
It is now possible to routinely perform atomistic simulations at the microsecond timescale. In the present work, we exploit this for a model binary Lennard-Jones glass to study structural relaxation at a timescale spanning up to 80 microseconds. It is found that at these longer time-scales, significant mobility and relaxation occurs, demonstrating a reproducible relaxation trajectory towards a class of asymptotic structural states which are strongly heterogeneous. These structures are discussed both in terms of the ideal glass state and a production route towards novel amorphous crystalline nano-composite micro-structures with strong interface stability.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Shapes and velocity relaxation of dislocation avalanches in Au and Nb single crystals
Authors:
Gregory Sparks,
Robert Maass
Abstract:
We capture the spatiotemporal velocity dynamics of dislocation avalanches in face-centered cubic (FCC) gold and body-centered cubic (BCC) niobium crystals by compression testing of cylindrical microcrystals. In niobium, avalanche peak-velocities are over one order of magnitude lower, have distinctly rougher avalanche shapes, and relax more slowly to zero velocity than in gold. The avalanche dynami…
▽ More
We capture the spatiotemporal velocity dynamics of dislocation avalanches in face-centered cubic (FCC) gold and body-centered cubic (BCC) niobium crystals by compression testing of cylindrical microcrystals. In niobium, avalanche peak-velocities are over one order of magnitude lower, have distinctly rougher avalanche shapes, and relax more slowly to zero velocity than in gold. The avalanche dynamics (including averaged avalanche shapes) can be described reasonably well by mean-field predictions for avalanches near the depinning transition in the case of gold, but not for niobium. A detailed analysis shows consistent deviations (non-trivial exponents) from the predicted functional forms for both gold and niobium if the exponent that describes the velocity decay of the shape function is treated as a free parameter. While the avalanche size statistics and related scaling exponents are similar, these noticeable differences in the dislocation-avalanche dynamics demonstrate material-specific variations not predicted by "universal" behavior. The marked difference in avalanche shapes is discussed in terms of edge- and screw-dislocation mobility of an operating spiral arm source.
△ Less
Submitted 8 May, 2018; v1 submitted 18 May, 2017;
originally announced May 2017.
-
Thermal processing and enthalpy storage of an amorphous solid: a molecular dynamics study
Authors:
P. M. Derlet,
R. Maass
Abstract:
Using very long molecular dynamics simulation runs, temperature protocols spanning up to five orders of magnitude in time-scales are performed to investigate thermally activated structural relaxation in a model amorphous solid. The simulations demonstrate significant local structural excitations as a function of increasing temperature and show that enthalpy rather than energy is primarily responsi…
▽ More
Using very long molecular dynamics simulation runs, temperature protocols spanning up to five orders of magnitude in time-scales are performed to investigate thermally activated structural relaxation in a model amorphous solid. The simulations demonstrate significant local structural excitations as a function of increasing temperature and show that enthalpy rather than energy is primarily responsible for relaxation. The observed enthalpy changes are of the order seen in experiment, and can be correlated with the level of internal hydrostatic stress homogenization and icosahedral content within the solid.
△ Less
Submitted 24 April, 2017;
originally announced April 2017.
-
Micro-plasticity and recent insights from intermittent and small-scale plasticity
Authors:
R. Maass,
P. M. Derlet
Abstract:
Prior to macroscopic yielding, most materials undergo a regime of plastic activity that cannot be resolved in conventional bulk deformation experiments. In this pre-yield, or micro-plastic regime, it is the initial three dimensional defect network that is probed and the intermittently evolving microstructure admits small increments in plastic strain. By reducing the sample size, this intermittent…
▽ More
Prior to macroscopic yielding, most materials undergo a regime of plastic activity that cannot be resolved in conventional bulk deformation experiments. In this pre-yield, or micro-plastic regime, it is the initial three dimensional defect network that is probed and the intermittently evolving microstructure admits small increments in plastic strain. By reducing the sample size, this intermittent activity becomes increasingly apparent and can be routinely observed through small-scale mechanical testing. In some cases, the intermittent activity was shown to exhibit aspects of scale-free behavior, prompting a paradigm shift away from traditional microstructure-dependent unit mechanisms that may be associated with a well defined length and stress scale. In this article, we discuss and review connections between classical micro-plasticity and intermittent flow across all length scales, with the aim of highlighting the value of miniaturized testing as a means to unravel this very early regime of bulk plasticity.
△ Less
Submitted 24 April, 2017;
originally announced April 2017.
-
Gamma relaxation in bulk metallic glasses
Authors:
Stefan Küchemann,
Robert Maaß
Abstract:
Studying the primary α- and secondary β-relaxation process has contributed significantly to the understanding of the structure and rheology of metallic glasses. In this letter, we report on a third relaxation mechanism indicated by a maximum in the loss modulus at low temperatures, which we term γ-relaxation. Contrary to the α- and β-relaxation mechanisms, this irreversible, low energy excitation…
▽ More
Studying the primary α- and secondary β-relaxation process has contributed significantly to the understanding of the structure and rheology of metallic glasses. In this letter, we report on a third relaxation mechanism indicated by a maximum in the loss modulus at low temperatures, which we term γ-relaxation. Contrary to the α- and β-relaxation mechanisms, this irreversible, low energy excitation causes a macroscopic rejuvenation, which we assign to non-affine atomic rearrangements in the matrix that are driven by thermal stresses during cooling. Observed in three different glassy alloys, the low temperature relaxation is identified as a general process in metallic glasses.
△ Less
Submitted 27 March, 2017;
originally announced March 2017.
-
Critical stress statistics and a fold catastrophe in intermittent crystal plasticity
Authors:
P. M. Derlet,
R. Maaß
Abstract:
The statistics and origin of the first discrete plastic event in a one dislocation dynamics simulation are studied. This is done via a linear stability analysis of the evolving dislocation configuration up to the onset of irreversible plasticity. It is found, via a fold catastrophe, the dislocation configuration prior to loading directly determines the stress at which the plastic event occurs and…
▽ More
The statistics and origin of the first discrete plastic event in a one dislocation dynamics simulation are studied. This is done via a linear stability analysis of the evolving dislocation configuration up to the onset of irreversible plasticity. It is found, via a fold catastrophe, the dislocation configuration prior to loading directly determines the stress at which the plastic event occurs and that between one and two trigger dislocations are involved. The resulting irreversible plastic strain arising from the instability is found to be highly correlated with these triggering dislocations.
△ Less
Submitted 2 March, 2016;
originally announced March 2016.
-
The stress statistics of the first pop-in or intermittent plastic event in cyrstal plasticity
Authors:
Peter Derlet,
Robert Maaß
Abstract:
The first plastic event occurring in discrete intermittent plasticity, as for example a pop-in seen in nano-indentation, is evaluated with extreme value statistics. It is found that when the same deformation is repeated many times, the average of the stress at this first event is related to the deforming volume via an exponentially truncated power-law. The present work demonstrates this trend and…
▽ More
The first plastic event occurring in discrete intermittent plasticity, as for example a pop-in seen in nano-indentation, is evaluated with extreme value statistics. It is found that when the same deformation is repeated many times, the average of the stress at this first event is related to the deforming volume via an exponentially truncated power-law. The present work demonstrates this trend and the expected Weibull fluctuation around it. The statistical formalism is shown to apply to the nano-indentation data of Morris {\em et al}, Phys. Rev. Lett. 106, 165502 (2011), as well as to dislocation dynamics simulations, which suggests a general phenomenon is at play. The truncated power law is found to uniquely determine an underlying critical stress master probability density function in terms of the Lambert-W function and the density of discrete plastic events available to the crystal. Thus the developed procedure allows for a quantitative characterization of a bulk material's initial microstructure via a deformation experiment that probes discrete intermittent plasticity.
△ Less
Submitted 26 February, 2016; v1 submitted 30 October, 2015;
originally announced October 2015.
-
Universal Power-Law Strengthening in Metals?
Authors:
P. M. Derlet,
R. Maass
Abstract:
The strength of most metals used in daily life scales with either an internal or external length scale. Empirically, this is characterized by power-laws persisting to six orders of magnitude in both strength and length scale. Attempts at understanding this scaling have generally been based on a specific mechanism. However the wide applicability of material type and microstructure to this phenomeno…
▽ More
The strength of most metals used in daily life scales with either an internal or external length scale. Empirically, this is characterized by power-laws persisting to six orders of magnitude in both strength and length scale. Attempts at understanding this scaling have generally been based on a specific mechanism. However the wide applicability of material type and microstructure to this phenomenon suggests a single mechanism is unlikely to capture the observed trend. Here we develop a model which gives quantitative insight into the scaling exponent using the known universal properties of a dislocation network and the leading order stress dependence of an underlying critical stress distribution. This approach justifies a value for the scaling exponent for virtually any experimental data set within the frameworks of both Hall-Petch strengthening and the "small is stronger" paradigm of small scale plasticity.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.
-
A probabilistic explanation for the size-effect in crystal plasticity
Authors:
Peter M. Derlet,
Robert Maass
Abstract:
In this work, the well known power-law relation between strength and sample size, $d^{-n}$, is derived from the knowledge that a dislocation network exhibits scale-free behaviour and the extreme value statistical properties of an arbitrary distribution of critical stresses. This approach yields $n=(τ+1)/(α+1)$, where $α$ reflects the leading order algebraic exponent of the low stress regime of the…
▽ More
In this work, the well known power-law relation between strength and sample size, $d^{-n}$, is derived from the knowledge that a dislocation network exhibits scale-free behaviour and the extreme value statistical properties of an arbitrary distribution of critical stresses. This approach yields $n=(τ+1)/(α+1)$, where $α$ reflects the leading order algebraic exponent of the low stress regime of the critical stress distribution and $τ$ is the scaling exponent for intermittent plastic strain activity. This quite general derivation supports the experimental observation that the size effect paradigm is applicable to a wide range of materials, differing in crystal structure, internal microstructure and external sample geometry.
△ Less
Submitted 4 July, 2014; v1 submitted 15 January, 2014;
originally announced January 2014.
-
Linking high and low temperature plasticity in bulk metallic glasses II: use of a log-normal barrier energy distribution and a mean field description of high temperature plasticity
Authors:
P. M. Derlet,
R. Maass
Abstract:
A thermal activation model to describe the plasticity of bulk metallic glasses (Derlet and Maaß, Phil. Mag. 2013, DOI: 10.1080/14786435.2013.826396) which uses a distribution of barrier energies and some aspects of under-cooled liquid physics is developed further. In particular, a log-normal distribution is now employed to describe the statistics of barrier energies. A high temperature mean-field…
▽ More
A thermal activation model to describe the plasticity of bulk metallic glasses (Derlet and Maaß, Phil. Mag. 2013, DOI: 10.1080/14786435.2013.826396) which uses a distribution of barrier energies and some aspects of under-cooled liquid physics is developed further. In particular, a log-normal distribution is now employed to describe the statistics of barrier energies. A high temperature mean-field description of homogeneous macro-plasticity is then developed and is shown to be similar to a thermal activation picture employing a single characteristic activation energy and activation volume. In making this comparison, the activation volume is interpreted as being proportional to the average mean-square-value of the plastic shear strain magnitude within the material. Also, the kinetic fragility at the glass transition temperature is shown to represent the effective number of irreversible structural transformations available at that temperature.
△ Less
Submitted 15 November, 2013;
originally announced November 2013.
-
Linking high and low temperature plasticity in bulk metallic glasses: thermal activation, extreme value statistics and kinetic freezing
Authors:
P. M. Derlet,
R. Maaß
Abstract:
At temperatures well below their glass transition, the deformation properties of bulk metallic glasses are characterised by a sharp transition from elasticity to plasticity, a reproducible yield stress, and an approximately linear decrease of this stress with increasing temperature. In the present work it shown that when the well known properties of the under-cooled liquid regime, in terms of the…
▽ More
At temperatures well below their glass transition, the deformation properties of bulk metallic glasses are characterised by a sharp transition from elasticity to plasticity, a reproducible yield stress, and an approximately linear decrease of this stress with increasing temperature. In the present work it shown that when the well known properties of the under-cooled liquid regime, in terms of the underlying potential energy landscape, are assumed to be also valid at low temperature, a simple thermal activation model is able to reproduce the observed onset of macro-scopic yield. At these temperatures, the thermal accessibility of the complex potential energy landscape is drastically reduced, and the statistics of extreme value and the phenomenon of kinetic freezing become important, affecting the spatial heterogeneity of the irreversible structural transitions mediating the elastic-to-plastic transition. As the temperature increases and approaches the glass transition temperature, the theory is able to smoothly transit to the high temperature deformation regime where plasticity is known to be well described by thermally activated viscoplastic models.
△ Less
Submitted 15 November, 2013; v1 submitted 19 February, 2013;
originally announced February 2013.
-
Micro-plasticity and intermittent dislocation activity in a simplified micro structural model
Authors:
P. M. Derlet,
R. Maaß
Abstract:
Here we present a model to study the micro-plastic regime of a stress-strain curve. In this model an explicit dislocation population represents the mobile dislocation content and an internal shear-stress field represents a mean-field description of the immobile dislocation content. The mobile dislocations are constrained to a simple dipolar mat geometry and modelled via a dislocation dynamics algo…
▽ More
Here we present a model to study the micro-plastic regime of a stress-strain curve. In this model an explicit dislocation population represents the mobile dislocation content and an internal shear-stress field represents a mean-field description of the immobile dislocation content. The mobile dislocations are constrained to a simple dipolar mat geometry and modelled via a dislocation dynamics algorithm, whilst the shear-stress field is chosen to be a sinusoidal function of distance along the mat direction. The latter, defined by a periodic length and a shear-stress amplitude, represents a pre-existing micro-structure. These model parameters, along with the mobile dislocation density, are found to admit a diversity of micro-plastic behaviour involving intermittent plasticity in the form of a scale-free avalanche phenomenon, with an exponent for the strain burst magnitude distribution similar to those seen in experiment and more complex dislocation dynamics simulations.
△ Less
Submitted 8 February, 2013; v1 submitted 7 May, 2012;
originally announced May 2012.
