Showing 1–23 of 23 results for author: Mayne, R

Propagation of electrical signals by fungi

Authors: Richard Mayne, Nic Roberts, Neil Phillips, Roshan Weerasekera, Andrew Adamatzky

Abstract: Living fungal mycelium networks are proven to have properties of memristors, capacitors and various sensors. To further progress our designs in fungal electronics we need to evaluate how electrical signals can be propagated through mycelium networks. We investigate the ability of mycelium-bound composites to convey electrical signals, thereby enabling the transmission of frequency-modulated inform… ▽ More Living fungal mycelium networks are proven to have properties of memristors, capacitors and various sensors. To further progress our designs in fungal electronics we need to evaluate how electrical signals can be propagated through mycelium networks. We investigate the ability of mycelium-bound composites to convey electrical signals, thereby enabling the transmission of frequency-modulated information through mycelium networks. Mycelia were found to reliably transfer signals with a recoverable frequency comparable to the input, in the \SIrange{100}{10000} {\hertz} frequency range. Mycelial adaptive responses, such as tissue repair, may result in fragile connections, however. While the mean amplitude of output signals was not reproducible among replicate experiments exposed to the same input frequency, the variance across groups was highly consistent. Our work is supported by NARX modelling through which an approximate transfer function was derived. These findings advance the state of the art of using mycelium-bound composites in analogue electronics and unconventional computing. △ Less

Submitted 20 April, 2023; originally announced April 2023.

Penalized Deep Partially Linear Cox Models with Application to CT Scans of Lung Cancer Patients

Authors: Yuming Sun, Jian Kang, Chinmay Haridas, Nicholas R. Mayne, Alexandra L. Potter, Chi-Fu Jeffrey Yang, David C. Christiani, Yi Li

Abstract: Lung cancer is a leading cause of cancer mortality globally, highlighting the importance of understanding its mortality risks to design effective patient-centered therapies. The National Lung Screening Trial (NLST) employed computed tomography texture analysis, which provides objective measurements of texture patterns on CT scans, to quantify the mortality risks of lung cancer patients. Partially… ▽ More Lung cancer is a leading cause of cancer mortality globally, highlighting the importance of understanding its mortality risks to design effective patient-centered therapies. The National Lung Screening Trial (NLST) employed computed tomography texture analysis, which provides objective measurements of texture patterns on CT scans, to quantify the mortality risks of lung cancer patients. Partially linear Cox models have gained popularity for survival analysis by dissecting the hazard function into parametric and nonparametric components, allowing for the effective incorporation of both well-established risk factors (such as age and clinical variables) and emerging risk factors (e.g., image features) within a unified framework. However, when the dimension of parametric components exceeds the sample size, the task of model fitting becomes formidable, while nonparametric modeling grapples with the curse of dimensionality. We propose a novel Penalized Deep Partially Linear Cox Model (Penalized DPLC), which incorporates the SCAD penalty to select important texture features and employs a deep neural network to estimate the nonparametric component of the model. We prove the convergence and asymptotic properties of the estimator and compare it to other methods through extensive simulation studies, evaluating its performance in risk prediction and feature selection. The proposed method is applied to the NLST study dataset to uncover the effects of key clinical and imaging risk factors on patients' survival. Our findings provide valuable insights into the relationship between these factors and survival outcomes. △ Less

Submitted 29 September, 2023; v1 submitted 9 March, 2023; originally announced March 2023.

Fungal electronics

Authors: Andrew Adamatzky, Phil Ayres, Alexander E. Beasley, Alessandro Chiolerio, Mohammad M. Dehshibi, Antoni Gandia, Elena Albergati, Richard Mayne, Anna Nikolaidou, Nic Roberts, Martin Tegelaar, Michail-Antisthenis Tsompanas, Neil Phillips, Han A. B. Wösten

Abstract: Fungal electronics is a family of living electronic devices made of mycelium bound composites or pure mycelium. Fungal electronic devices are capable of changing their impedance and generating spikes of electrical potential in response to external control parameters. Fungal electronics can be embedded into fungal materials and wearables or used as stand alone sensing and computing devices. Fungal electronics is a family of living electronic devices made of mycelium bound composites or pure mycelium. Fungal electronic devices are capable of changing their impedance and generating spikes of electrical potential in response to external control parameters. Fungal electronics can be embedded into fungal materials and wearables or used as stand alone sensing and computing devices. △ Less

Submitted 22 November, 2021; originally announced November 2021.

On stimulating fungi $Pleurotus~ostreatus$ with Cortisol

Authors: Mohammad Mahdi Dehshibi, Alessandro Chiolerio, Anna Nikolaidou, Richard Mayne, Antoni Gandia, Mona Ashtari, Andrew Adamatzky

Abstract: Fungi cells are capable of sensing extracellular cues through reception, transduction and response systems which allow them to communicate with their host and adapt to their environment. They display effective regulatory protein expressions which enhance and regulate their response and adaptation to a variety of triggers such as stress, hormones, light, chemicals and host factors. In our recent st… ▽ More Fungi cells are capable of sensing extracellular cues through reception, transduction and response systems which allow them to communicate with their host and adapt to their environment. They display effective regulatory protein expressions which enhance and regulate their response and adaptation to a variety of triggers such as stress, hormones, light, chemicals and host factors. In our recent studies, we have shown that $Pleurotus$ oyster fungi generate electrical potential impulses in the form of spike events as a result of their exposure to environmental, mechanical and chemical triggers, demonstrating that it is possible to discern the nature of stimuli from the fungi electrical responses. Harnessing the power of fungi sensing and intelligent capabilities, we explored the communication protocols of fungi as reporters of human chemical secretions such as hormones, addressing the question if fungi can sense human signals. We exposed $Pleurotus$ oyster fungi to cortisol, directly applied to a surface of a hemp shavings substrate colonised by fungi, and recorded the electrical activity of fungi. The response of fungi to cortisol was also supplementary studied through the application of X-ray to identify changes in the fungi tissue, where receiving cortisol by the substrate can inhibit the flow of calcium and, in turn, reduce its physiological changes. This study could pave the way for future research on adaptive fungal wearables capable for detecting physiological states of humans and biosensors made of living fungi. △ Less

Submitted 1 June, 2021; originally announced June 2021.

On Boolean gates in fungal colony

Authors: Andrew Adamatzky, Martin Tegelaar, Han A. B. Wosten, Anna L. Powell, Alexander E. Beasley, Richard Mayne

Abstract: A fungal colony maintains its integrity via flow of cytoplasm along mycelium network. This flow, together with possible coordination of mycelium tips propagation, is controlled by calcium waves and associated waves of electrical potential changes. We propose that these excitation waves can be employed to implement a computation in the mycelium networks. We use FitzHugh-Nagumo model to imitate prop… ▽ More A fungal colony maintains its integrity via flow of cytoplasm along mycelium network. This flow, together with possible coordination of mycelium tips propagation, is controlled by calcium waves and associated waves of electrical potential changes. We propose that these excitation waves can be employed to implement a computation in the mycelium networks. We use FitzHugh-Nagumo model to imitate propagation of excitation in a single colony of Aspergillus niger. Boolean values are encoded by spikes of extracellular potential. We represent binary inputs by electrical impulses on a pair of selected electrodes and we record responses of the colony from sixteen electrodes. We derive sets of two-inputs-on-output logical gates implementable the fungal colony and analyse distributions of the gates. △ Less

Submitted 22 February, 2020; originally announced February 2020.

Liquid Marble Photosensor

Authors: Andrew Adamatzky, Michail-Antisthenis Tsompanas, Thomas C. Draper, Richard Mayne

Abstract: A liquid marble is a liquid droplet coated by a hydrophobic power. The liquid marble does not wet adjacent surfaces and therefore can be manipulated as a dry soft body. A Belousov-Zhabotinsky (BZ) reaction is an oscillatory chemical reaction exhibiting waves of oxidation. We demonstrate how to make a photo-sensor from BZ medium liquid marbles. We insert electrodes into a liquid marble, prepared fr… ▽ More A liquid marble is a liquid droplet coated by a hydrophobic power. The liquid marble does not wet adjacent surfaces and therefore can be manipulated as a dry soft body. A Belousov-Zhabotinsky (BZ) reaction is an oscillatory chemical reaction exhibiting waves of oxidation. We demonstrate how to make a photo-sensor from BZ medium liquid marbles. We insert electrodes into a liquid marble, prepared from BZ solution and coated with polyethylene powder. The electrodes record a potential difference which oscillates due to oxidation wave-fronts crossing the electrodes. When the BZ marble is illuminated by a light source, the oxidation wave-fronts are hindered and, thus, the electrical potential recorded ceases to oscillate. We characterise several types of responses of BZ marble photosensors to various stimuli, and provide explanations of the recorded activity. BZ liquid marble photosensors may find applications in the fields of liquid electronics, soft robotics and unconventional computing. △ Less

Submitted 1 August, 2019; originally announced August 2019.

Journal ref: ChemPhysChem, 2020, 21, 90-98

On resistance switching and oscillations in tubulin microtubule droplets

Authors: Alessandro Chiolerio, Thomas C. Draper, Richard Mayne, Andrew Adamatzky

Abstract: We study electrical properties of Taxol-stabilised microtubule (MT) ensembles in a droplet of water. We demonstrate that the MT droplets act as electrical switches. Also, a stimulation of a MT droplet with a positive fast impulse causes oscillation of the droplet's resistance. The findings will pave a way towards future designs of MT-based sensing and computing devices, including data storage and… ▽ More We study electrical properties of Taxol-stabilised microtubule (MT) ensembles in a droplet of water. We demonstrate that the MT droplets act as electrical switches. Also, a stimulation of a MT droplet with a positive fast impulse causes oscillation of the droplet's resistance. The findings will pave a way towards future designs of MT-based sensing and computing devices, including data storage and featuring liquid state. △ Less

Submitted 17 July, 2019; originally announced July 2019.

Journal ref: J. Colloid Interface Sci., 2020, 560, 589-595

Neuromorphic Liquid Marbles With Aqueous Carbon Nanotube Cores

Authors: Richard Mayne, Thomas C. Draper, Neil Phillips, James G. H. Whiting, Roshan Weerasekera, Claire Fullarton, Ben P. J. de Lacy Costello, Andrew Adamatzky

Abstract: Neuromorphic computing devices attempt to emulate features of biological nervous systems through mimicking the properties of synapses, towards implementing the emergent properties of their counterparts, such as learning. Inspired by recent advances in the utilisation of liquid marbles (microlitre quantities of fluid coated in hydrophobic powder) for the creation of unconventional computing devices… ▽ More Neuromorphic computing devices attempt to emulate features of biological nervous systems through mimicking the properties of synapses, towards implementing the emergent properties of their counterparts, such as learning. Inspired by recent advances in the utilisation of liquid marbles (microlitre quantities of fluid coated in hydrophobic powder) for the creation of unconventional computing devices, we describe the development of liquid marbles with neuromorphic properties through the use of copper coatings and 1.0 mg/ml carbon nanotube-containing fluid cores. Experimentation was performed through sandwiching the marbles between two cup-style electrodes and stimulating them with repeated DC pulses at 3.0 V. Our results demonstrate that `entrainment' of a carbon nanotube filled-copper liquid marble via periodic pulses can cause their electrical resistance to rapidly switch between high to low resistance profiles, upon inverting the polarity of stimulation: the reduction in resistance between high and low profiles was approximately 88\% after two rounds of entrainment. This effect was found to be reversible through reversion to the original stimulus polarity and was strengthened by repeated experimentation, as evidenced by a mean reduction in time to switching onset of 43\%. These effects were not replicated in nanotube solutions not bound inside liquid marbles. Our electrical characterisation also reveals that nanotube-filled liquid marbles exhibit pinched loop hysteresis IV profiles consistent with the description of memristors. We conclude by discussing the applications of this technology to the development of unconventional computing devices and the study of emergent characteristics in biological neural tissue. △ Less

Submitted 19 June, 2019; originally announced June 2019.

Comments: 14 pages, 5 figures

Journal ref: Langmuir, 2019, 35, 13182-13188

Towards Experimental P-systems using multivesicular liposomes

Authors: Richard Mayne, Neil Phillips, Andrew Adamatzky

Abstract: P-systems are abstract computational models inspired by the phospholipid bilayer membranes generated by biological cells. Illustrated here is a mechanism by which recursive liposome structures (multivesicular liposomes) may be experimentally produced through electroformation of dipalmitoylphosphatidylcholine (DOPC) films for use in `real' P-systems. We first present the electroformation protocol a… ▽ More P-systems are abstract computational models inspired by the phospholipid bilayer membranes generated by biological cells. Illustrated here is a mechanism by which recursive liposome structures (multivesicular liposomes) may be experimentally produced through electroformation of dipalmitoylphosphatidylcholine (DOPC) films for use in `real' P-systems. We first present the electroformation protocol and microscopic characterisation of incident liposomes towards estimating the size of computing elements, level of internal compartment recursion, fault tolerance and stability. Following, we demonstrate multiple routes towards embedding symbols, namely modification of swelling solutions, passive diffusion and microinjection. Finally, we discuss how computing devices based on P-systems can be produced and their current limitations. △ Less

Submitted 13 December, 2018; originally announced December 2018.

Comments: 14 pages, 5 figures

When the path is never shortest: a reality check on shortest path biocomputation

Authors: Richard Mayne

Abstract: Shortest path problems are a touchstone for evaluating the computing performance and functional range of novel computing substrates. Much has been published in recent years regarding the use of biocomputers to solve minimal path problems such as route optimisation and labyrinth navigation, but their outputs are typically difficult to reproduce and somewhat abstract in nature, suggesting that both… ▽ More Shortest path problems are a touchstone for evaluating the computing performance and functional range of novel computing substrates. Much has been published in recent years regarding the use of biocomputers to solve minimal path problems such as route optimisation and labyrinth navigation, but their outputs are typically difficult to reproduce and somewhat abstract in nature, suggesting that both experimental design and analysis in the field require standardising. This chapter details laboratory experimental data which probe the path finding process in two single-celled protistic model organisms, Physarum polycephalum and Paramecium caudatum, comprising a shortest path problem and labyrinth navigation, respectively. The results presented illustrate several of the key difficulties that are encountered in categorising biological behaviours in the language of computing, including biological variability, non-halting operations and adverse reactions to experimental stimuli. It is concluded that neither organism examined are able to efficiently or reproducibly solve shortest path problems in the specific experimental conditions that were tested. Data presented are contextualised with biological theory and design principles for maximising the usefulness of experimental biocomputer prototypes. △ Less

Submitted 8 December, 2017; originally announced December 2017.

Comments: To appear in: Adamatzky, A (Ed.) Shortest path solvers. From software to wetware. Springer, 2018

Slime mould: the fundamental mechanisms of cognition

Authors: Jordi Vallverdu, Oscar Castro, Richard Mayne, Max Talanov, Michael Levin, Frantisek Baluska, Yukio Gunji, Audrey Dussutour, Hector Zenil, Andrew Adamatzky

Abstract: The slime mould Physarum polycephalum has been used in developing unconventional computing devices for in which the slime mould played a role of a sensing, actuating, and computing device. These devices treated the slime mould rather as an active living substrate yet the slime mould is a self-consistent living creature which evolved for millions of years and occupied most part of the world, but in… ▽ More The slime mould Physarum polycephalum has been used in developing unconventional computing devices for in which the slime mould played a role of a sensing, actuating, and computing device. These devices treated the slime mould rather as an active living substrate yet the slime mould is a self-consistent living creature which evolved for millions of years and occupied most part of the world, but in any case, that living entity did not own true cognition, just automated biochemical mechanisms. To "rehabilitate" the slime mould from the rank of a purely living electronics element to a "creature of thoughts" we are analyzing the cognitive potential of P. polycephalum. We base our theory of minimal cognition of the slime mould on a bottom-up approach, from the biological and biophysical nature of the slime mould and its regulatory systems using frameworks suh as Lyon's biogenic cognition, Muller, di Primio-Lengelerś modifiable pathways, Bateson's "patterns that connect" framework, Maturana's autopoetic network, or proto-consciousness and Morgan's Canon. △ Less

Submitted 1 December, 2017; originally announced December 2017.

The compositional diversity of non-Vesta basaltic asteroids

Authors: Thomas B. Leith, Nicholas A. Moskovitz, Rhiannon G. Mayne, Francesca E. DeMeo, Driss Takir, Brian J. Burt, Richard P. Binzel, Dimitra Pefkou

Abstract: We present near-infrared (0.78-2.45 μm) reflectance spectra for nine middle and outer main belt (a > 2.5 AU) basaltic asteroids. Three of these objects are spectrally distinct from all classifications in the Bus-DeMeo system and could represent spectral end members in the existing taxonomy or be representatives of a new spectral type. The remainder of the sample are classified as V- or R- type. Al… ▽ More We present near-infrared (0.78-2.45 μm) reflectance spectra for nine middle and outer main belt (a > 2.5 AU) basaltic asteroids. Three of these objects are spectrally distinct from all classifications in the Bus-DeMeo system and could represent spectral end members in the existing taxonomy or be representatives of a new spectral type. The remainder of the sample are classified as V- or R- type. All of these asteroids are dynamically detached from the Vesta collisional family, but are too small to be intact differentiated parent bodies, implying that they originated from differentiated planetesimals which have since been destroyed or ejected from the solar system. The 1- and 2-μm band centers of all objects, determined using the Modified Gaussian Model (MGM), were compared to those of 47 Vestoids and fifteen HED meteorites of known composition. The HEDs enabled us to determine formulas relating Band 1 and Band 2 centers to pyroxene ferrosilite (Fs) compositions. Using these formulas we present the most comprehensive compositional analysis to date of middle and outer belt basaltic asteroids. We also conduct a careful error analysis of the MGM-derived band centers for implementation in future analyses. The six outer belt V- and R-type asteroids show more dispersion in parameter space than the Vestoids, reflecting greater compositional diversity than Vesta and its associated bodies. The objects analyzed have Fs numbers which are, on average, between five and ten molar percent lower than those of the Vestoids; however, identification and compositional analysis of additional outer belt basaltic asteroids would help to confirm or refute this result. Given the gradient in oxidation state which existed within the solar nebula, these results tentatively suggest that these objects formed at either a different time or location than 4 Vesta. △ Less

Submitted 17 May, 2017; originally announced May 2017.

Comments: 41 pages, 8 figures

Computers from plants we never made. Speculations

Authors: Andrew Adamatzky, Simon Harding, Victor Erokhin, Richard Mayne, Nina Gizzie, Frantisek Baluska, Stefano Mancuso, Georgios Sirakoulis

Abstract: We discuss possible designs and prototypes of computing systems that could be based on morphological development of roots, interaction of roots, and analog electrical computation with plants, and plant-derived electronic components. In morphological plant processors data are represented by initial configuration of roots and configurations of sources of attractants and repellents; results of comput… ▽ More We discuss possible designs and prototypes of computing systems that could be based on morphological development of roots, interaction of roots, and analog electrical computation with plants, and plant-derived electronic components. In morphological plant processors data are represented by initial configuration of roots and configurations of sources of attractants and repellents; results of computation are represented by topology of the roots' network. Computation is implemented by the roots following gradients of attractants and repellents, as well as interacting with each other. Problems solvable by plant roots, in principle, include shortest-path, minimum spanning tree, Voronoi diagram, $α$-shapes, convex subdivision of concave polygons. Electrical properties of plants can be modified by loading the plants with functional nanoparticles or coating parts of plants of conductive polymers. Thus, we are in position to make living variable resistors, capacitors, operational amplifiers, multipliers, potentiometers and fixed-function generators. The electrically modified plants can implement summation, integration with respect to time, inversion, multiplication, exponentiation, logarithm, division. Mathematical and engineering problems to be solved can be represented in plant root networks of resistive or reaction elements. Developments in plant-based computing architectures will trigger emergence of a unique community of biologists, electronic engineering and computer scientists working together to produce living electronic devices which future green computers will be made of. △ Less

Submitted 28 February, 2017; originally announced February 2017.

Comments: The chapter will be published in "Inspired by Nature. Computing inspired by physics, chemistry and biology. Essays presented to Julian Miller on the occasion of his 60th birthday", Editors: Susan Stepney and Andrew Adamatzky (Springer, 2017)

On hybrid circuits exploiting thermistive properties of slime mould

Authors: Xavier Alexis Walter, Ian Horsfield, Richard Mayne, Ioannis A. Ieropoulos, Andrew Adamatzky

Abstract: Slime mould Physarum polycephalum is a single cell visible by unaided eye. Let the slime mould span two electrodes with a single protoplasmic tube: if the tube is heated to approximately 40°C, the electrical resistance of the protoplasmic tube increases from 3 MΩ to approximatively 10'000 MΩ. The organism's resistance is not proportional nor correlated to the temperature of its environment. Slime… ▽ More Slime mould Physarum polycephalum is a single cell visible by unaided eye. Let the slime mould span two electrodes with a single protoplasmic tube: if the tube is heated to approximately 40°C, the electrical resistance of the protoplasmic tube increases from 3 MΩ to approximatively 10'000 MΩ. The organism's resistance is not proportional nor correlated to the temperature of its environment. Slime mould can therefore not be considered as a thermistor but rather as a thermic switch. We employ the P. polycephalum thermic switch to prototype hybrid electrical analog summator, NAND gates, and cascade the gates into Flip-Flop latch. Computing operations performed on this bio-hybrid computing circuitry feature high repeatability, reproducibility and comparably low propagation delays △ Less

Submitted 8 December, 2015; originally announced December 2015.

Comments: 9 pages, 6 figures & 1 Table, submitted to Scientific Reports

Living Wires - Effects of Size and Coating of Gold Nanoparticles in Altering the Electrical Properties of Physarum polycephalum and Lettuce Seedlings

Authors: Nina Gizzie, Richard Mayne, Shlomo Yitzchaik, Muhamad Ikbal, Andrew Adamatzky

Abstract: The manipulation of biological substrates is becoming more popular route towards generating novel computing devices. Physarum polycephalum is used as a model organism in biocomputing because it can create `wires' for use in hybrid circuits; programmable growth by manipulation through external stimuli and the ability withstanding a current and its tolerance to hybridisation with a variety of nano/m… ▽ More The manipulation of biological substrates is becoming more popular route towards generating novel computing devices. Physarum polycephalum is used as a model organism in biocomputing because it can create `wires' for use in hybrid circuits; programmable growth by manipulation through external stimuli and the ability withstanding a current and its tolerance to hybridisation with a variety of nano/microparticles. Lettuce seedlings have also had previous interest invested in them for generating plant wires, although currently there is little information as to their suitability for such applications. In this study both P. polycephalum and Lettuce seedlings were hybridised with gold nanoparticles - functionalised and unfunctionalised - to explore their uptake, toxicological effects and, crucially, any alterations in electrical properties they bestow upon the organisms. Using various microscopy techniques it was shown that P. polycephalum and lettuce seedlings are able to internalize nanoparticles and assemble them in vivo, however some toxicological effects were observed. The electrical resistance of both lettuce seedlings and P. polycephalum was found to decrease, the most significant reduction being with lettuce seedlings whose resistance reduced from 3MOhms to 0.5MOhms. We conclude that gold is a suitable nanomaterial for biohybridisation specifically in creating conductive pathways for more efficient biological wires in self-growing hybrid circuitry. △ Less

Submitted 7 December, 2015; originally announced December 2015.

Practical circuits with Physarum Wires

Authors: James G. H. Whiting, Richard Mayne, Nadine Moody, Ben de Lacy Costello, Andrew Adamatzky

Abstract: Purpose: Protoplasmic tubes of Physarum polycephalum, also know as Physarum Wires (PW), have been previously suggested as novel bio- electronic components. Until recently, practical examples of electronic circuits using PWs have been limited. These PWs have been shown to be self repairing, offering significant advantage over traditional electronic components. This article documents work performed… ▽ More Purpose: Protoplasmic tubes of Physarum polycephalum, also know as Physarum Wires (PW), have been previously suggested as novel bio- electronic components. Until recently, practical examples of electronic circuits using PWs have been limited. These PWs have been shown to be self repairing, offering significant advantage over traditional electronic components. This article documents work performed to produce practical circuits using PWs. Method: We have demonstrated through manufacture and testing of hybrid circuits that PWs can be used to produce a variety of practical electronic circuits. A purality of different applications of PWs have been tested to show the universality of PWs in analogue and digital electronics. Results: Voltage dividers can be produced using a pair of PWs in series with an output voltage accurate to within 12%. PWs can also transmit analogue and digital data with a frequency of up to 19 kHz, which with the addition of a buffer, can drive high current circuits. We have demonstrated that PWs can last approximately two months, a 4 fold increase on previous literature. Protoplasmic tubes can be modified with the addition of conductive or magnetic nano-particles to provide changes in functionality. Conclusion This work has documented novel macro-scale data transmission through biological material; it has advanced the field of bio-electronics by providing a cheap and easy to grow conducting bio-material which may be used in future hybrid electronic technology. △ Less

Submitted 24 November, 2015; originally announced November 2015.

Representation of Shape Mediated by Environmental Stimuli in Physarum polycephalum and a Multi-agent Model

Authors: Jeff Jones, Richard Mayne, Andrew Adamatzky

Abstract: The slime mould Physarum polycephalum is known to construct proto- plasmic transport networks which approximate proximity graphs by forag- ing for nutrients during its plasmodial life cycle stage. In these networks, nodes are represented by nutrients and edges are represented by proto- plasmic tubes. These networks have been shown to be efficient in terms of length and resilience of the overall ne… ▽ More The slime mould Physarum polycephalum is known to construct proto- plasmic transport networks which approximate proximity graphs by forag- ing for nutrients during its plasmodial life cycle stage. In these networks, nodes are represented by nutrients and edges are represented by proto- plasmic tubes. These networks have been shown to be efficient in terms of length and resilience of the overall network to random damage. However relatively little research has been performed in the potential for Physarum transport networks to approximate the overall shape of a dataset. In this paper we distinguish between connectivity and shape of a planar point dataset and demonstrate, using scoping experiments with plasmodia of P. polycephalum and a multi-agent model of the organism, how we can gen- erate representations of the external and internal shapes of a set of points. As with proximity graphs formed by P. polycephalum, the behaviour of the plasmodium (real and model) is mediated by environmental stimuli. We further explore potential morphological computation approaches with the multi-agent model, presenting methods which approximate the Convex Hull and the Concave Hull. We demonstrate how a growth parameter in the model can be used to transition between Convex and Concave Hulls. These results suggest novel mechanisms of morphological computation mediated by environmental stimuli. △ Less

Submitted 18 November, 2015; originally announced November 2015.

On the role of the plasmodial cytoskeleton in facilitating intelligent behaviour in slime mould Physarum polycephalum

Authors: Richard Mayne, Andrew Adamatzky, Jeff Jones

Abstract: The plasmodium of slime mould Physarum polycephalum behaves as an amorphous reaction-diffusion computing substrate and is capable of apparently intelligent behaviour. But how does intelligence emerge in an acellular organism? Through a range of laboratory experiments, we visualise the plasmodial cytoskeleton, a ubiquitous cellular protein scaffold whose functions are manifold and essential to life… ▽ More The plasmodium of slime mould Physarum polycephalum behaves as an amorphous reaction-diffusion computing substrate and is capable of apparently intelligent behaviour. But how does intelligence emerge in an acellular organism? Through a range of laboratory experiments, we visualise the plasmodial cytoskeleton, a ubiquitous cellular protein scaffold whose functions are manifold and essential to life, and discuss its putative role as a network for transducing, transmitting and structuring data streams within the plasmodium. Through a range of computer modelling techniques, we demonstrate how emergent behaviour, and hence computational intelligence, may occur in cytoskeletal communications networks. Specifically, we model the topology of both the actin and tubulin cytoskeletal networks and discuss how computation may occur therein. Furthermore, we present bespoke cellular automata and particle swarm models for the computational process within the cytoskeleton and observe the incidence of emergent patterns in both. Our work grants unique insight into the origins of natural intelligence; the results presented here are therefore readily transferable to the fields of natural computation, cell biology and biomedical science. We conclude by discussing how our results may alter our biological, computational and philosophical understanding of intelligence and consciousness. △ Less

Submitted 10 March, 2015; originally announced March 2015.

Comments: 25 pages, 10 figures

Journal ref: Communicative & Integrative Biology 7 (1), e32097, 2014

Actin automata: Phenomenology and localizations

Authors: Andrew Adamatzky, Richard Mayne

Abstract: Actin is a globular protein which forms long filaments in the eukaryotic cytoskeleton, whose roles in cell function include structural support, contractile activity to intracellular signalling. We model actin filaments as two chains of one-dimensional binary-state semi-totalistic automaton arrays to describe hypothetical signalling events therein. Each node of the actin automaton takes state `0' (… ▽ More Actin is a globular protein which forms long filaments in the eukaryotic cytoskeleton, whose roles in cell function include structural support, contractile activity to intracellular signalling. We model actin filaments as two chains of one-dimensional binary-state semi-totalistic automaton arrays to describe hypothetical signalling events therein. Each node of the actin automaton takes state `0' (resting) or `1' (excited) and updates its state in discrete time depending on its neighbour's states. We analyse the complete rule space of actin automata using integral characteristics of space-time configurations generated by these rules and compute state transition rules that support travelling and mobile localizations. Approaches towards selection of the localisation supporting rules using the global characteristics are outlined. We find that some properties of actin automata rules may be predicted using Shannon entropy, activity and incoherence of excitation between the polymer chains. We also show that it is possible to infer whether a given rule supports travelling or stationary localizations by looking at ratios of excited neighbours are essential for generations of the localizations. We conclude by applying biomolecular hypotheses to this model and discuss the significance of our findings in context with cell signalling and emergent behaviour in cellular computation. △ Less

Submitted 15 August, 2014; originally announced August 2014.

Towards slime mould electrical logic gates with optical coupling

Authors: Richard Mayne, Andrew Adamatzky

Abstract: Physarum polycephalum is a macroscopic single celled plasmodial slime mould. We employ plasmodial phototactic responses to construct laboratory prototypes of NOT and NAND logical gates with electrical inputs/outputs and optical coupling; the slime mould plays dual roles of computing device and electrical conductor. Slime mould logical gates are fault tolerant and resettable. The results presented… ▽ More Physarum polycephalum is a macroscopic single celled plasmodial slime mould. We employ plasmodial phototactic responses to construct laboratory prototypes of NOT and NAND logical gates with electrical inputs/outputs and optical coupling; the slime mould plays dual roles of computing device and electrical conductor. Slime mould logical gates are fault tolerant and resettable. The results presented here advance our understanding of how biological computing substrates may be manipulated to implement logical operations and demonstrate the feasibility of integrating living substrates into silicon hardware. △ Less

Submitted 16 March, 2014; originally announced March 2014.

Towards Hybrid Artificial-Slime Mould Devices

Authors: Richard Mayne, Andrew Adamatzky

Abstract: The plasmodium of the slime mould Physarum polycephalum has recently received significant attention for its value as a highly malleable amorphous computing substrate. In laboratory-based experiments, micro- and nanoscale artificial circuit components were introduced into the P. polycephalum plasmdodium to investigate the electrical properties and computational abilities of hybridised slime mould.… ▽ More The plasmodium of the slime mould Physarum polycephalum has recently received significant attention for its value as a highly malleable amorphous computing substrate. In laboratory-based experiments, micro- and nanoscale artificial circuit components were introduced into the P. polycephalum plasmdodium to investigate the electrical properties and computational abilities of hybridised slime mould. It was found through a combination of imaging techniques and electrophysiological measurements that P. polycephalum is able to internalise a range of electrically active nanoparticles, assemble them in vivo and distribute them around the plasmodium. Hybridised plasmodium is able to form biomorphic mineralised networks, both inside the living plasmodium and the empty trails left in its wake by taxis, both of which facilitate the transmission of electricity. Hybridisation also alters the bioelectrical activity of the plasmodium and likely influences its information processing capabilities. It was concluded that hybridised slime mould is a suitable substrate for producing functional unconventional computing devices. △ Less

Submitted 17 November, 2013; originally announced November 2013.

Comments: Submitted to Biophysical Reviews and Letters

On the internalisation, intraplasmodial carriage and excretion of metallic nanoparticles in the slime mould Physarum polycephalum

Authors: Richard Mayne, David Patton, Ben de Lacy Costello, Andrew Adamatzky, Rosemary Camilla Patton

Abstract: The plasmodium of Physarum polycephalum is a large single cell visible with the naked eye. When inoculated on a substrate with attractants and repellents the plasmodium develops optimal networks of protoplasmic tubes which span sites of attractants (i.e. nutrients) yet avoid domains with a high nutrient concentration. It should therefore be possible to program the plasmodium towards deterministic… ▽ More The plasmodium of Physarum polycephalum is a large single cell visible with the naked eye. When inoculated on a substrate with attractants and repellents the plasmodium develops optimal networks of protoplasmic tubes which span sites of attractants (i.e. nutrients) yet avoid domains with a high nutrient concentration. It should therefore be possible to program the plasmodium towards deterministic adaptive transformation of internalised nano- and micro-scale materials. In laboratory experiments with magnetite nanoparticles and glass micro-spheres coated with silver metal we demonstrate that the plasmodium of P. polycephalum can propagate the nano-scale objects using a number of distinct mechanisms including endocytosis, transcytosis and dragging. The results of our experiments could be used in the development of novel techniques targeted towards the growth of metallised biological wires and hybrid nano- and micro-circuits. △ Less

Submitted 22 October, 2013; originally announced October 2013.

Drop-coated Titanium Dioxide Memristors

Authors: Ella Gale, Richard Mayne, Andrew Adamatzky, Ben de Lacy Costello

Abstract: The fabrication of memristors by drop-coating sol-gel Ti(OH)$_4$ solution onto either aluminium foil or sputter-coated aluminium on plastic is presented. The gel layer is thick, 37$μ$m, but both devices exhibit good memristance I-V profiles. The drop coated aluminium foil memristors compare favourably with the sputter-coated ones, demonstrating an expansion in the accessibility of memristor fabric… ▽ More The fabrication of memristors by drop-coating sol-gel Ti(OH)$_4$ solution onto either aluminium foil or sputter-coated aluminium on plastic is presented. The gel layer is thick, 37$μ$m, but both devices exhibit good memristance I-V profiles. The drop coated aluminium foil memristors compare favourably with the sputter-coated ones, demonstrating an expansion in the accessibility of memristor fabrication. A comparison between aluminium and gold for use as the sputter-coated electrodes shows that aluminium is the better choice as using gold leads to device failure. The devices do not require a forming step. △ Less

Submitted 5 January, 2013; v1 submitted 13 May, 2012; originally announced May 2012.

Comments: 9 figures. arXiv admin note: substantial text overlap with arXiv:1106.6293

Journal ref: Materials Chemistry and Physics, Volume 143, Issue 2, 15 January 2014, Pages 524-529,