-
Laboratory Demonstration of Spatial Linear Dark Field Control For Imaging Extrasolar Planets in Reflected Light
Authors:
Thayne Currie,
Eugene Pluzhnik,
Olivier Guyon,
Ruslan Belikov,
Kelsey Miller,
Steven Bos,
Jared Males,
Dan Sirbu,
Charlotte Bond,
Richard Frazin,
Tyler Groff,
Brian Kern,
Julien Lozi,
Benjamin Mazin,
Bijan Nemati,
Barnaby Norris,
Hari Subedi,
Scott Will
Abstract:
Imaging planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo -- i.e. a dark hole -- at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts…
▽ More
Imaging planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo -- i.e. a dark hole -- at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts ($\sim$ 5$\times$10$^{-7}$) and separations (1.5--5.2 $λ$/D) needed to image jovian planets around Sun-like stars with space-borne coronagraphs like WFIRST-CGI and image exo-Earths around low-mass stars with future ground-based 30m class telescopes. In four separate experiments and for a range of different perturbations, LDFC largely restores (to within a factor of 1.2--1.7) and maintains a dark hole whose contrast is degraded by phase errors by an order of magnitude. Our implementation of classical speckle nulling requires a factor of 2--5 more iterations and 20--50 DM commands to reach contrasts obtained by spatial LDFC. Our results provide a promising path forward to maintaining dark holes without relying on DM probing and in the low-flux regime, which may improve the duty cycle of high-contrast imaging instruments, increase the temporal correlation of speckles, and thus enhance our ability to image true solar system analogues in the next two decades.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Developing Linear Dark-Field Control for Exoplanet Direct Imaging in the Laboratory and on Ground-based Telescopes
Authors:
Thayne Currie,
Eugene Pluzhnik,
Ruslan Belikov,
Olivier Guyon
Abstract:
Imaging rocky planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo at just several diffraction beam widths. We discuss development of Linear Dark Field Control (LDFC) to achieve this aim. We describe efforts to test spatial LDFC in a laboratory setting for the first time, using t…
▽ More
Imaging rocky planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo at just several diffraction beam widths. We discuss development of Linear Dark Field Control (LDFC) to achieve this aim. We describe efforts to test spatial LDFC in a laboratory setting for the first time, using the Ames Coronagraph Experiment (ACE) testbed. Our preliminary results indicate that spatial LDFC is a promising method focal-plane wavefront control method capable of maintaining a static dark hole, at least at contrasts relevant for imaging mature planets with 30m-class telescopes.
△ Less
Submitted 25 September, 2019;
originally announced September 2019.
-
TDEM final report: Enhanced direct imaging exoplanet detection with astrometry mass determination
Authors:
Eduardo Bendek,
Ruslan Belikov,
Olivier Guyon,
Thomas Greene,
Eugene Pluzhnik,
Tom Milster,
Alexander Rodack,
Emily Finan,
Justin Knight
Abstract:
This Final Report (FR) presents the results of the Enhanced direct imaging exoplanet detection with astrometry mass determination project, which was executed in support of NASA's Exoplanet Exploration Program and the ROSES Technology Development for Exoplanet Missions (TDEM). The first milestone is concerned with a demonstration of medium fidelity astrometry accuracy and the second milestone demon…
▽ More
This Final Report (FR) presents the results of the Enhanced direct imaging exoplanet detection with astrometry mass determination project, which was executed in support of NASA's Exoplanet Exploration Program and the ROSES Technology Development for Exoplanet Missions (TDEM). The first milestone is concerned with a demonstration of medium fidelity astrometry accuracy and the second milestone demonstrates high-contrast imaging utilizing the same astrometry-capable optics. We have met milestone #1 with a comfortable margin. The average accuracy obtained over the three datasets is 5.75e-5 L/D, which is 4 times better than the milestone requirement, or equivalent to 2.5microarcsec on 2.4m telescope, or 1.5microarcsec for a 4m telescope, working in the visible band. These results show the potential of this technique to enable detection and measure masses of Earth-like planets around nearby stars, hence bringing a real benefit to the astronomy community. We also met milestone #2 and demonstrated that it is possible to achieve high-contrast imaging utilizing a coronagraph fed by a telescope equipped with a DP, enabling dual use of the telescope. We performed three different high-contrast imaging runs and met the milestone #2 of 5e-7 raw contrast for all of them. On average, we obtained 3.33e-7 raw contrast considering all data sets. This result is 35% better than the milestone #2 requirement. We validated the stability of the high-contrast region by averaging frames and subtracting the average from single frames, which resulted in contrast improvement of approximately one order of magnitude, reaching 2.72e-8 contrast. The main achievement of this work was the medium fidelity demonstration and feasibility validation of performing astrometry and direct imaging using the same instrument, significantly enhancing the expected scientific yield of dedicated exoplanet characterization missions.
△ Less
Submitted 17 May, 2018;
originally announced May 2018.
-
Demonstration of broadband contrast at 1.2 $λ$/D and greater for the EXCEDE Starlight Suppression System
Authors:
Dan Sirbu,
Sandrine J. Thomas,
Ruslan Belikov,
Julien Lozi,
Eduardo Bendek,
Eugene Pluzhnik,
Dana H. Lynch,
Troy Hix,
Peter Zell,
Olivier Guyon,
Glenn Schneider
Abstract:
The EXoplanetary Circumstellar Environments and Disk Explorer (EXCEDE) science mission concept uses a visible-wavelength Phase-Induced Amplitude Apodization (PIAA) coronagraph to enable high-contrast imaging of circumstellar debris systems and some giant planets at angular separations reaching into the habitable zones of some of the nearest stars. We report on the experimental results obtained in…
▽ More
The EXoplanetary Circumstellar Environments and Disk Explorer (EXCEDE) science mission concept uses a visible-wavelength Phase-Induced Amplitude Apodization (PIAA) coronagraph to enable high-contrast imaging of circumstellar debris systems and some giant planets at angular separations reaching into the habitable zones of some of the nearest stars. We report on the experimental results obtained in the vacuum chamber at the Lockheed Martin Advanced Technology Center in 10% broadband light centered about 650 nm, with a median contrast of $1 \times 10^{-5}$ between 1.2 and 2.0 $λ$/D simultaneously with $3 \times 10^{-7}$ contrast between 2 and 11 $λ/D$ for a single-sided dark hole using a deformable mirror (DM) upstream of the PIAA coronagraph. These results are stable and repeatable as demonstrated by three measurements runs with DM settings set from scratch and maintained on the best 90% out of the 1000 collected frames. We compare the reduced experimental data with simulation results from modeling observed experimental limits; observed performance is consistent with uncorrected low-order modes not estimated by the Low Order Wavefront Sensor (LOWFS). Modeled sensitivity to bandwidth and residual tip/tilt modes is well-matched to the experiment.
△ Less
Submitted 7 September, 2017;
originally announced September 2017.
-
Wavefront retrieval through random pupil plane phase probes: Gerchberg-Saxton approach
Authors:
Eugene Pluzhnik,
Dan Sirbu,
Ruslan Belikov,
Eduardo Bendek,
Vladimir N. Dudinov
Abstract:
A pupil plane wavefront reconstruction procedure is proposed based on analysis of a sequence of focal plane images corresponding to a sequence of random pupil plane phase probes. The developed method provides the unique nontrivial solution of wavefront retrieval problem and shows global convergence to this solution demonstrated using a Gerchberg-Saxton implementation. The method is general and can…
▽ More
A pupil plane wavefront reconstruction procedure is proposed based on analysis of a sequence of focal plane images corresponding to a sequence of random pupil plane phase probes. The developed method provides the unique nontrivial solution of wavefront retrieval problem and shows global convergence to this solution demonstrated using a Gerchberg-Saxton implementation. The method is general and can be used in any optical system that includes deformable mirrors for active/adaptive wavefront correction. The presented numerical simulation and lab experimental results show low noise sensitivity, high reliability and robustness of the proposed approach for high quality optical wavefront restoration. Laboratory experiments have shown $λ$/14 rms accuracy in retrieval of a poked DM actuator fiducial pattern with spatial resolution of 20-30$~μ$m that is comparable with accuracy of direct high-resolution interferometric measurements.
△ Less
Submitted 9 November, 2018; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Development of a Miniaturized Deformable Mirror Controller
Authors:
Eduardo Bendek,
Dana Lynch,
Eugene Pluzhnik,
Ruslan Belikov,
Benjamin Klamm,
Elizabeth Hyde,
Katherine Mumm
Abstract:
High-Performance Adaptive Optics systems are rapidly spreading as useful applications in the fields of astronomy, ophthalmology, and telecommunications. This technology is critical to enable coronagraphic direct imaging of exoplanets utilized in ground-based telescopes and future space missions such as WFIRST, EXO-C, HabEx, and LUVOIR. We have developed a miniaturized Deformable Mirror controller…
▽ More
High-Performance Adaptive Optics systems are rapidly spreading as useful applications in the fields of astronomy, ophthalmology, and telecommunications. This technology is critical to enable coronagraphic direct imaging of exoplanets utilized in ground-based telescopes and future space missions such as WFIRST, EXO-C, HabEx, and LUVOIR. We have developed a miniaturized Deformable Mirror controller to enable active optics on small space imaging mission. The system is based on the Boston Micromachines Corporation Kilo-DM, which is one of the most widespread DMs on the market. The system has three main components: The Deformable Mirror, the Driving Electronics, and the Mechanical and Heat management. The system is designed to be extremely compact and have low- power consumption to enable its use not only on exoplanet missions, but also in a wide-range of applications that require precision optical systems, such as direct line-of-sight laser communications, and guidance systems. The controller is capable of handling 1,024 actuators with 220V maximum dynamic range, 16bit resolution, and 14bit accuracy, and operating at up to 1kHz frequency. The system fits in a 10x10x5cm volume, weighs less than 0.5kg, and consumes less than 8W. We have developed a turnkey solution reducing the risk for currently planned as well as future missions, lowering their cost by significantly reducing volume, weight and power consumption of the wavefront control hardware.
△ Less
Submitted 21 March, 2017;
originally announced March 2017.
-
QoS-based Computing Resources Partitioning between Virtual Machines in the Cloud Architecture
Authors:
Evgeny Nikulchev,
Evgeniy Pluzhnik,
Oleg Lukyanchikov,
Dmitry Biryukov,
Elena Andrianova
Abstract:
Cloud services have been used very widely, but configuration of the parameters, including the efficient allocation of resources, is an important objective for the system architect. The article is devoted to solving the problem of choosing the architecture of computers based on simulation and developed program for monitoring computing resources. Techniques were developed aimed at providing the requ…
▽ More
Cloud services have been used very widely, but configuration of the parameters, including the efficient allocation of resources, is an important objective for the system architect. The article is devoted to solving the problem of choosing the architecture of computers based on simulation and developed program for monitoring computing resources. Techniques were developed aimed at providing the required quality of service and efficient use of resources. The article describes the monitoring program of computing resources and time efficiency of the target application functions. On the basis of this application the technique is shown and described in the experiment, designed to ensure the requirements for quality of service, by isolating one process from the others on different virtual machines inside the hypervisor.
△ Less
Submitted 4 December, 2016;
originally announced December 2016.
-
Designing Applications in a Hybrid Cloud
Authors:
Evgeny Nikulchev,
Evgeniy Pluzhnik,
Dmitry Biryukov,
Oleg Lukyanchikov
Abstract:
Designing applications for hybrid cloud has many features, including dynamic virtualization management and route switching. This makes it impossible to evaluate the query and hence the optimal distribution of data. In this paper, we formulate the main challenges of designing and simulation, offer installation for processing.
Designing applications for hybrid cloud has many features, including dynamic virtualization management and route switching. This makes it impossible to evaluate the query and hence the optimal distribution of data. In this paper, we formulate the main challenges of designing and simulation, offer installation for processing.
△ Less
Submitted 6 December, 2015;
originally announced December 2015.
-
Experimental Study of the Cloud Architecture Selection for Effective Big Data Processing
Authors:
E. Nikulchev,
E. Pluzhnik,
D. Biryukov,
O. Lukyanchikov,
S. Payain
Abstract:
Big data dictate their requirements to the hardware and software. Simple migration to the cloud data processing, while solving the problem of increasing computational capabilities, however creates some issues: the need to ensure the safety, the need to control the quality during data transmission, the need to optimize requests. Computational cloud does not simply provide scalable resources but als…
▽ More
Big data dictate their requirements to the hardware and software. Simple migration to the cloud data processing, while solving the problem of increasing computational capabilities, however creates some issues: the need to ensure the safety, the need to control the quality during data transmission, the need to optimize requests. Computational cloud does not simply provide scalable resources but also requires network infrastructure, unknown routes and the number of user requests. In addition, during functioning situation can occur, in which you need to change the architecture of the application - part of the data needs to be placed in a private cloud, part in a public cloud, part stays on the client.
△ Less
Submitted 1 July, 2015;
originally announced July 2015.
-
Designing Applications with Distributed Databases in a Hybrid Cloud
Authors:
Evgeniy Pluzhnik,
Oleg Lukyanchikov,
Evgeny Nikulchev,
Simon Payain
Abstract:
Designing applications for use in a hybrid cloud has many features. These include dynamic virtualization management and an unknown route switching customers. This makes it impossible to evaluate the query and hence the optimal distribution of data. In this paper, we formulate the main challenges of designing and simulation offer installation for processing.
Designing applications for use in a hybrid cloud has many features. These include dynamic virtualization management and an unknown route switching customers. This makes it impossible to evaluate the query and hence the optimal distribution of data. In this paper, we formulate the main challenges of designing and simulation offer installation for processing.
△ Less
Submitted 19 February, 2015;
originally announced February 2015.
-
Using Object-Relational Mapping to Create the Distributed Databases in a Hybrid Cloud Infrastructure
Authors:
Oleg Lukyanchikov,
Evgeniy Pluzhnik,
Simon Payain,
Evgeny Nikulchev
Abstract:
One of the challenges currently problems in the use of cloud services is the task of designing of specialized data management systems. This is especially important for hybrid systems in which the data are located in public and private clouds. Implementation monitoring functions querying, scheduling and processing software must be properly implemented and is an integral part of the system. To provi…
▽ More
One of the challenges currently problems in the use of cloud services is the task of designing of specialized data management systems. This is especially important for hybrid systems in which the data are located in public and private clouds. Implementation monitoring functions querying, scheduling and processing software must be properly implemented and is an integral part of the system. To provide these functions is proposed to use an object-relational mapping (ORM). The article devoted to presenting the approach of designing databases for information systems hosted in a hybrid cloud infrastructure. It also provides an example of the development of ORM library.
△ Less
Submitted 4 January, 2015;
originally announced January 2015.
-
Laboratory Test Bench for Research Network and Cloud Computing
Authors:
Evgeniy Pluzhnik,
Evgeny Nikulchev,
Simon Payain
Abstract:
At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a hybrid cloud infrastructure, quality of service (QoS) at different levels of cloud services, dynamic control of distribution of cloud resources in application systems and many others.…
▽ More
At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a hybrid cloud infrastructure, quality of service (QoS) at different levels of cloud services, dynamic control of distribution of cloud resources in application systems and many others. Research and development of new solutions can be limited in case of using emulators or international commercial cloud services, due to the closed architecture and limited opportunities for experimentation. Article provides answers to questions on the establishment of a pilot cloud practically "at home" with the ability to adjust the width of the emulation channel and delays in data transmission. It also describes architecture and configuration of the experimental setup. The proposed modular structure can be expanded by available computing power.
△ Less
Submitted 14 September, 2014;
originally announced September 2014.
-
Virtual Laboratories in Cloud Infrastructure of Educational Institutions
Authors:
Evgeniy Pluzhnik,
Evgeny Nikulchev
Abstract:
Modern educational institutions widely used virtual laboratories and cloud technologies. In practice must deal with security, processing speed and other tasks. The paper describes the experience of the construction of an experimental stand cloud computing and network management. Models and control principles set forth herein.
Modern educational institutions widely used virtual laboratories and cloud technologies. In practice must deal with security, processing speed and other tasks. The paper describes the experience of the construction of an experimental stand cloud computing and network management. Models and control principles set forth herein.
△ Less
Submitted 14 September, 2014;
originally announced September 2014.
-
EXCEDE Technology Development III: First Vacuum Tests
Authors:
Ruslan Belikov,
Julien Lozi,
Eugene Pluzhnik,
Troy T. Hix,
Eduardo Bendek,
Sandrine J. Thomas,
Dana H. Lynch,
Roger Mihara,
J. Wes Irwin,
Alan L. Duncan,
Thomas P. Greene,
Olivier Guyon,
Richard L. Kendrick,
Eric H. Smith,
Fred C. Witteborn,
Glenn Schneider
Abstract:
This paper is the third in the series on the technology development for the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission concept, which in 2011 was selected by NASA's Explorer program for technology development (Category III). EXCEDE is a 0.7m space telescope concept designed to achieve raw contrasts of 1e6 at an inner working angle of 1.2 l/D and 1e7 at 2 l/D and bey…
▽ More
This paper is the third in the series on the technology development for the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission concept, which in 2011 was selected by NASA's Explorer program for technology development (Category III). EXCEDE is a 0.7m space telescope concept designed to achieve raw contrasts of 1e6 at an inner working angle of 1.2 l/D and 1e7 at 2 l/D and beyond. This will allow it to directly detect and spatially resolve low surface brightness circumstellar debris disks as well as image giant planets as close as in the habitable zones of their host stars. In addition to doing fundamental science on debris disks, EXCEDE will also serve as a technological and scientific precursor for any future exo-Earth imaging mission. EXCEDE uses a Starlight Suppression System (SSS) based on the PIAA coronagraph, enabling aggressive performance.
We report on our continuing progress of developing the SSS for EXCEDE, and in particular (a) the reconfiguration of our system into a more flight-like layout, with an upstream deformable mirror and an inverse PIAA system, as well as a LOWFS, and (b) testing this system in a vacuum chamber, including IWA, contrast, and stability performance. The results achieved so far are 2.9e-7 contrast between 1.2-2.0 l/D and 9.7e-8 contrast between 2.0-6.0 l/D in monochromatic light; as well as 1.4e-6 between 2.0-6.0 l/D in a 10% band, all with a PIAA coronagraph operating at an inner working angle of 1.2 l/D. This constitutes better contrast than EXCEDE requirements (in those regions) in monochromatic light, and progress towards requirements in broadband light. Even though this technology development is primarily targeted towards EXCEDE, it is also germane to any exoplanet direct imaging space-based telescopes because of the many challenges common to different coronagraph architectures and mission requirements.
△ Less
Submitted 16 July, 2014;
originally announced July 2014.
-
Experimental study of a low-order wavefront sensor for high-contrast coronagraphic imagers: results in air and in vacuum
Authors:
Julien Lozi,
Ruslan Belikov,
Sandrine J. Thomas,
Eugene Pluzhnik,
Eduardo Bendek,
Olivier Guyon,
Glenn Schneider
Abstract:
For the technology development of the mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) - a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D - we developed two test benches simulating its key components, one in air, t…
▽ More
For the technology development of the mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) - a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D - we developed two test benches simulating its key components, one in air, the other in vacuum. To achieve this level of contrast, one of the main goals is to remove low-order aberrations, using a Low-Order WaveFront Sensor (LOWFS). We tested this key component, together with the coronagraph and the wavefront control, in air at NASA Ames Research Center and in vacuum at Lockheed Martin. The LOWFS, controlling tip/tilt modes in real time at 1~kHz, allowed us to reduce the disturbances in air to 1e-3 lambda/D rms, letting us achieve a contrast of 2.8e-7 between 1.2 and 2 lambda/D. Tests are currently being performed to achieve the same or a better level of correction in vacuum. With those results, and by comparing them to simulations, we are able to deduce its performances on different coronagraphs - different sizes of telescopes, inner working angles, contrasts, etc. - and therefore study its contribution beyond EXCEDE.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
Concept of Feedback in Future Computing Models to Cloud Systems
Authors:
Evgeniy Pluzhnik,
Evgeniy Nikulchev,
Simon Payain
Abstract:
Currently, it is urgent to ensure QoS in distributed computing systems. This became especially important to the development and spread of cloud services. Big data structures become heavily distributed. Necessary to consider the communication channels and data transmission systems and virtualization and scalability in future design of computational models in problems of designing cloud systems, eva…
▽ More
Currently, it is urgent to ensure QoS in distributed computing systems. This became especially important to the development and spread of cloud services. Big data structures become heavily distributed. Necessary to consider the communication channels and data transmission systems and virtualization and scalability in future design of computational models in problems of designing cloud systems, evaluating the effectiveness of the algorithms, the assessment of economic performance data centers. Requires not only the monitoring of data flows and computing resources, but also the operational management of these resources to QoS provide. Such a tool may be just the introduction of feedback in computational models. The article presents the main dynamic model with feedback as a basis for a new model of distributed computing processes. The research results are presented here. Formulated in this work can be used for other complex tasks - estimation of structural complexity of distributed databases, evaluation of dynamic characteristics of systems operating in the hybrid cloud, etc.
△ Less
Submitted 19 February, 2014;
originally announced February 2014.
-
Optimal Control of Applications for Hybrid Cloud Services
Authors:
Evgeniy Pluzhnik,
Evgeniy Nikulchev,
Simon Payain
Abstract:
Development of cloud computing enables to move Big Data in the hybrid cloud services. This requires research of all processing systems and data structures for provide QoS. Due to the fact that there are many bottlenecks requires monitoring and control system when performing a query. The models and optimization criteria for the design of systems in a hybrid cloud infrastructures are created. In thi…
▽ More
Development of cloud computing enables to move Big Data in the hybrid cloud services. This requires research of all processing systems and data structures for provide QoS. Due to the fact that there are many bottlenecks requires monitoring and control system when performing a query. The models and optimization criteria for the design of systems in a hybrid cloud infrastructures are created. In this article suggested approaches and the results of this build.
△ Less
Submitted 19 February, 2014;
originally announced February 2014.
-
Use of Dynamical Systems Modeling to Hybrid Cloud Database
Authors:
Evgeniy Pluzhnik,
Evgeny Nikulchev
Abstract:
In the article, an experiment is aimed at clarifying the transfer efficiency of the database in the cloud infrastructure. The system was added to the control unit, which has guided the database search in the local part or in the cloud. It is shown that the time data acquisition remains unchanged as a result of modification. Suggestions have been made about the use of the theory of dynamic systems…
▽ More
In the article, an experiment is aimed at clarifying the transfer efficiency of the database in the cloud infrastructure. The system was added to the control unit, which has guided the database search in the local part or in the cloud. It is shown that the time data acquisition remains unchanged as a result of modification. Suggestions have been made about the use of the theory of dynamic systems to hybrid cloud database. The present work is aimed at attracting the attention of spe-cialists in the field of cloud database to the apparatus control theory. The experiment presented in this article allows the use of the description of the known methods for solving important practical problems.
△ Less
Submitted 6 February, 2014;
originally announced February 2014.
-
Experimental study of a low-order wavefront sensor for the high-contrast coronagraphic imager EXCEDE
Authors:
Julien Lozi,
Ruslan Belikov,
Glenn Schneider,
Olivier Guyon,
Eugene Pluzhnik,
Sandrine J. Thomas,
Frantz Martinache
Abstract:
The mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer), selected by NASA for technology development, is designed to study the formation, evolution and architectures of exoplanetary systems and characterize circumstellar environments into stellar habitable zones. It is composed of a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and…
▽ More
The mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer), selected by NASA for technology development, is designed to study the formation, evolution and architectures of exoplanetary systems and characterize circumstellar environments into stellar habitable zones. It is composed of a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D. One of the key challenges to achieve those contrasts is to remove low-order aberrations, using a Low-Order WaveFront Sensor (LOWFS). An experiment simulating the starlight suppression system is currently developed at NASA Ames Research Center, and includes a LOWFS controlling tip/tilt modes in real time at 500 Hz. The LOWFS allowed us to reduce the tip/tilt disturbances to 1e-3 lambda/D rms, enhancing the previous contrast by a decade, to 8e-7 between 1.2 and 2 lambda/D. A Linear Quadratic Gaussian (LQG) controller is currently implemented to improve even more that result by reducing residual vibrations. This testbed shows that a good knowledge of the low-order disturbances is a key asset for high contrast imaging, whether for real-time control or for post processing.
△ Less
Submitted 6 September, 2013;
originally announced September 2013.
-
High Contrast Imaging and Wavefront Control with a PIAA Coronagraph: Laboratory System Validation
Authors:
Olivier Guyon,
Eugene Pluzhnik,
Frantz Martinache,
Julien Totems,
Shinichiro Tanaka,
Taro Matsuo,
Celia Blain,
Ruslan Belikov
Abstract:
The Phase-Induced Amplitude Apodization (PIAA) coronagraph is a high performance coronagraph concept able to work at small angular separation with little loss in throughput. We present results obtained with a laboratory PIAA system including active wavefront control. The system has a 94.3% throughput (excluding coating losses) and operates in air with monochromatic light.
Our testbed achieved…
▽ More
The Phase-Induced Amplitude Apodization (PIAA) coronagraph is a high performance coronagraph concept able to work at small angular separation with little loss in throughput. We present results obtained with a laboratory PIAA system including active wavefront control. The system has a 94.3% throughput (excluding coating losses) and operates in air with monochromatic light.
Our testbed achieved a 2.27e-7 raw contrast between 1.65 lambda/D (inner working angle of the coronagraph configuration tested) and 4.4 lambda/D (outer working angle). Through careful calibration, we were able to separate this residual light into a dynamic coherent component (turbulence, vibrations) at 4.5e-8 contrast and a static incoherent component (ghosts and/or polarization missmatch) at 1.6e-7 contrast. Pointing errors are controlled at the 1e-3 lambda/D level using a dedicated low order wavefront sensor.
While not sufficient for direct imaging of Earth-like planets from space, the 2.27e-7 raw contrast achieved already exceeds requirements for a ground-based Extreme Adaptive Optics system aimed at direct detection of more massive exoplanets. We show that over a 4hr long period, averaged wavefront errors have been controlled to the 3.5e-9 contrast level. This result is particularly encouraging for ground based Extreme-AO systems relying on long term stability and absence of static wavefront errors to recover planets much fainter than the fast boiling speckle halo.
△ Less
Submitted 6 November, 2009;
originally announced November 2009.
-
First Images of R Aquarii and its Asymmetric H$_{2}$O Shell
Authors:
S. Ragland,
H. Le Coroller,
E. Pluzhnik,
W. D. Cotton,
W. C. Danchi,
J. D. Monnier,
W. A. Traub,
L. A. Willson,
J. -P. Berger,
M. G. Lacasse
Abstract:
We report imaging observations of the symbotic long-period Mira variable R Aquarii (R Aqr) at near-infrared and radio wavelengths. The near-infrared observations were made with the IOTA imaging interferometer in three narrow-band filters centered at 1.51, 1.64, and 1.78 $μ$m, which sample mainly water, continuum, and water features, respectively. Our near-infrared fringe visibility and closure p…
▽ More
We report imaging observations of the symbotic long-period Mira variable R Aquarii (R Aqr) at near-infrared and radio wavelengths. The near-infrared observations were made with the IOTA imaging interferometer in three narrow-band filters centered at 1.51, 1.64, and 1.78 $μ$m, which sample mainly water, continuum, and water features, respectively. Our near-infrared fringe visibility and closure phase data are analyzed using three models. (a) A uniform disk model with wavelength-dependent sizes fails to fit the visibility data, and is inconsistent with the closure phase data. (b) A three- component model, comprising a Mira star, water shell, and an off-axis point source, provide a good fit to all data. (c) A model generated by a constrained image reconstruction analysis provides more insight, suggesting that the water shell is highly non-uniform, i.e., clumpy. The VLBA observations of SiO masers in the outer molecular envelope show evidence of turbulence, with jet-like features containing velocity gradients.
△ Less
Submitted 22 January, 2008;
originally announced January 2008.
-
Theoretical Limits on Extrasolar Terrestrial Planet Detection with Coronagraphs
Authors:
O. Guyon,
E. A. Pluzhnik,
M. J. Kuchner,
B. Collins,
S. T. Ridgway
Abstract:
Many high contrast coronagraph designs have recently been proposed. In this paper, their suitability for direct imaging of extrasolar terrestrial planets is reviewed. We also develop a linear-algebra based model of coronagraphy that can both explain the behavior of existing coronagraphs and quantify the coronagraphic performance limit imposed by fundamental physics. We find that the maximum theo…
▽ More
Many high contrast coronagraph designs have recently been proposed. In this paper, their suitability for direct imaging of extrasolar terrestrial planets is reviewed. We also develop a linear-algebra based model of coronagraphy that can both explain the behavior of existing coronagraphs and quantify the coronagraphic performance limit imposed by fundamental physics. We find that the maximum theoretical throughput of a coronagraph is equal to one minus the non-aberrated non-coronagraphic PSF of the telescope. We describe how a coronagraph reaching this fundamental limit may be designed, and how much improvement over the best existing coronagraph design is still possible. Both the analytical model and numerical simulations of existing designs also show that this theoretical limit rapidly degrades as the source size is increased: the ``highest performance'' coronagraphs, those with the highest throughput and smallest Inner Working Angle (IWA), are the most sensitive to stellar angular diameter. This unfortunately rules out the possibility of using a small IWA (lambda/d) coronagraph for a terrestrial planet imaging mission.
Finally, a detailed numerical simulation which accurately accounts for stellar angular size, zodiacal and exozodiacal light is used to quantify the efficiency of coronagraph designs for direct imaging of extrasolar terrestrial planets in a possible real observing program. We find that in the photon noise limited regime, a 4m telescope with a theoretically optimal coronagraph is able to detect Earth-like planets around 50 stars with 1hr exposure time per target (assuming 25% throughput and exozodi levels similar to our solar system). We also show that at least 2 existing coronagraph design can approach this level of performance in the ideal monochromatic case considered in this study.
△ Less
Submitted 23 August, 2006;
originally announced August 2006.
-
Telescope to Observe Planetary Systems (TOPS): a high throughput 1.2-m visible telescope with a small inner working angle
Authors:
Olivier Guyon,
James R. P. Angel,
Charles Bowers,
James Burge,
Adam Burrows,
Johanan Codona,
Thomas Greene,
Masanori Iye,
James Kasting,
Hubert Martin,
Donald W. McCarthy, Jr.,
Victoria Meadows,
Michael Meyer,
Eugene A. Pluzhnik,
Norman Sleep,
Tony Spears,
Motohide Tamura,
Domenick Tenerelli,
Robert Vanderbei,
Bruce Woodgate,
Robert A. Woodruff,
Neville J. Woolf,
/
Abstract:
The Telescope to Observe Planetary Systems (TOPS) is a proposed space mission to image in the visible (0.4-0.9 micron) planetary systems of nearby stars simultaneously in 16 spectral bands (resolution R~20). For the ~10 most favorable stars, it will have the sensitivity to discover 2 R_E rocky planets within habitable zones and characterize their surfaces or atmospheres through spectrophotometry…
▽ More
The Telescope to Observe Planetary Systems (TOPS) is a proposed space mission to image in the visible (0.4-0.9 micron) planetary systems of nearby stars simultaneously in 16 spectral bands (resolution R~20). For the ~10 most favorable stars, it will have the sensitivity to discover 2 R_E rocky planets within habitable zones and characterize their surfaces or atmospheres through spectrophotometry. Many more massive planets and debris discs will be imaged and characterized for the first time. With a 1.2m visible telescope, the proposed mission achieves its power by exploiting the most efficient and robust coronagraphic and wavefront control techniques. The Phase-Induced Amplitude Apodization (PIAA) coronagraph used by TOPS allows planet detection at 2 lambda/d with nearly 100% throughput and preserves the telescope angular resolution. An efficient focal plane wavefront sensing scheme accurately measures wavefront aberrations which are fed back to the telescope active primary mirror. Fine wavefront control is also performed independently in each of 4 spectral channels, resulting in a system that is robust to wavefront chromaticity.
△ Less
Submitted 15 June, 2006;
originally announced June 2006.
-
Exoplanet Imaging with a Phase-induced Amplitude Apodization Coronagraph III. Hybrid Approach: Optical Design and Diffraction Analysis
Authors:
E. A. Pluzhnik,
O. Guyon,
S. T. Ridgway,
F. Martinache,
R. A. Woodruff,
C. Blain,
R. Galicher
Abstract:
Properly apodized pupils can deliver point spread functions (PSFs) free of Airy rings, and are suitable for high dynamical range imaging of extrasolar terrestrial planets (ETPs). To reach this goal, classical pupil apodization (CPA) unfortunately requires most of the light gathered by the telescope to be absorbed, resulting in poor throughput and low angular resolution. Phase-induced amplitude a…
▽ More
Properly apodized pupils can deliver point spread functions (PSFs) free of Airy rings, and are suitable for high dynamical range imaging of extrasolar terrestrial planets (ETPs). To reach this goal, classical pupil apodization (CPA) unfortunately requires most of the light gathered by the telescope to be absorbed, resulting in poor throughput and low angular resolution. Phase-induced amplitude apodization (PIAA) of the telescope pupil (Guyon 2003) combines the advantages of classical pupil apodization (particularly low sensitivity to low order aberrations) with full throughput, no loss of angular resolution and little chromaticity, which makes it, theoretically, an extremely attractive coronagraph for direct imaging of ETPs. The two most challenging aspects of this technique are (1) the difficulty to polish the required optics shapes and (2) diffraction propagation effects which, because of their chromaticity, can decrease the spectral bandwidth of the coronagraph. We show that a properly designed hybrid system combining classical apodization with the PIAA technique can solve both problems simultaneously. For such a system, the optics shapes can be well within today's optics manufacturing capabilities, and the $10^{-10}$ PSF contrast at $\approx 1.5 λ/D$ required for efficient imaging of ETPs can be maintained over the whole visible spectrum. This updated design of the PIAA coronagraph maintains the high performance of the earlier design, since only a small part of the light is lost in the classical apodizer(s).
△ Less
Submitted 15 December, 2005;
originally announced December 2005.
-
Exoplanets imaging with a Phase-Induced Amplitude Apodization Coronagraph - I. Principle
Authors:
Olivier Guyon,
Eugene A. Pluzhnik,
Raphael Galicher,
Frantz Martinache,
Stephen T. Ridgway,
Robert A. Woodruff
Abstract:
Using 2 aspheric mirrors, it is possible to apodize a telescope beam without losing light or angular resolution: the output beam is produced by ``remapping'' the entrance beam to produce the desired light intensity distribution in a new pupil. We present the Phase-Induced Amplitude Apodization Coronagraph (PIAAC) concept, which uses this technique, and we show that it allows efficient direct ima…
▽ More
Using 2 aspheric mirrors, it is possible to apodize a telescope beam without losing light or angular resolution: the output beam is produced by ``remapping'' the entrance beam to produce the desired light intensity distribution in a new pupil. We present the Phase-Induced Amplitude Apodization Coronagraph (PIAAC) concept, which uses this technique, and we show that it allows efficient direct imaging of extrasolar terrestrial planets with a small-size telescope in space. The suitability of the PIAAC for exoplanet imaging is due to a unique combination of achromaticity, small inner working angle (about 1.5 $λ/d$), high throughput, high angular resolution and large field of view. 3D geometrical raytracing is used to investigate the off-axis aberrations of PIAAC configurations, and show that a field of view of more than 100 $λ/d$ in radius is available thanks to the correcting optics of the PIAAC. Angular diameter of the star and tip-tilt errors can be compensated for by slightly increasing the size of the occulting mask in the focal plane, with minimal impact on the system performance. Earth-size planets at 10 pc can be detected in less than 30s with a 4m telescope. Wavefront quality requirements are similar to classical techniques.
△ Less
Submitted 8 December, 2004;
originally announced December 2004.
