-
Industrial-Grade Time-Dependent Counterfactual Root Cause Analysis through the Unanticipated Point of Incipient Failure: a Proof of Concept
Authors:
Alexandre Trilla,
Rajesh Rajendran,
Ossee Yiboe,
Quentin Possamaï,
Nenad Mijatovic,
Jordi Vitrià
Abstract:
This paper describes the development of a counterfactual Root Cause Analysis diagnosis approach for an industrial multivariate time series environment. It drives the attention toward the Point of Incipient Failure, which is the moment in time when the anomalous behavior is first observed, and where the root cause is assumed to be found before the issue propagates. The paper presents the elementary…
▽ More
This paper describes the development of a counterfactual Root Cause Analysis diagnosis approach for an industrial multivariate time series environment. It drives the attention toward the Point of Incipient Failure, which is the moment in time when the anomalous behavior is first observed, and where the root cause is assumed to be found before the issue propagates. The paper presents the elementary but essential concepts of the solution and illustrates them experimentally on a simulated setting. Finally, it discusses avenues of improvement for the maturity of the causal technology to meet the robustness challenges of increasingly complex environments in the industry.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Learning Reduced Nonlinear State-Space Models: an Output-Error Based Canonical Approach
Authors:
Steeven Janny,
Quentin Possamai,
Laurent Bako,
Madiha Nadri,
Christian Wolf
Abstract:
The identification of a nonlinear dynamic model is an open topic in control theory, especially from sparse input-output measurements. A fundamental challenge of this problem is that very few to zero prior knowledge is available on both the state and the nonlinear system model. To cope with this challenge, we investigate the effectiveness of deep learning in the modeling of dynamic systems with non…
▽ More
The identification of a nonlinear dynamic model is an open topic in control theory, especially from sparse input-output measurements. A fundamental challenge of this problem is that very few to zero prior knowledge is available on both the state and the nonlinear system model. To cope with this challenge, we investigate the effectiveness of deep learning in the modeling of dynamic systems with nonlinear behavior by advocating an approach which relies on three main ingredients: (i) we show that under some structural conditions on the to-be-identified model, the state can be expressed in function of a sequence of the past inputs and outputs; (ii) this relation which we call the state map can be modelled by resorting to the well-documented approximation power of deep neural networks; (iii) taking then advantage of existing learning schemes, a state-space model can be finally identified. After the formulation and analysis of the approach, we show its ability to identify three different nonlinear systems. The performances are evaluated in terms of open-loop prediction on test data generated in simulation as well as a real world data-set of unmanned aerial vehicle flight measurements.
△ Less
Submitted 19 April, 2022;
originally announced June 2022.
-
Learning to estimate UAV created turbulence from scene structure observed by onboard cameras
Authors:
Quentin Possamaï,
Steeven Janny,
Madiha Nadri,
Laurent Bako,
Christian Wolf
Abstract:
Controlling UAV flights precisely requires a realistic dynamic model and accurate state estimates from onboard sensors like UAV, GPS and visual observations. Obtaining a precise dynamic model is extremely difficult, as important aerodynamic effects are hard to model, in particular ground effect and other turbulences. While machine learning has been used in the past to estimate UAV created turbulen…
▽ More
Controlling UAV flights precisely requires a realistic dynamic model and accurate state estimates from onboard sensors like UAV, GPS and visual observations. Obtaining a precise dynamic model is extremely difficult, as important aerodynamic effects are hard to model, in particular ground effect and other turbulences. While machine learning has been used in the past to estimate UAV created turbulence, this was restricted to flat grounds or diffuse in-flight air turbulences, both without taking into account obstacles. In this work we address the complex problem of estimating in-flight turbulences caused by obstacles, in particular the complex structures in cluttered environments. We learn a mapping from control input and images captured by onboard cameras to turbulence. In a large-scale setting, we train a model over a large number of different simulated photo-realistic environments loaded into the Habitat.AI simulator augmented with a dynamic UAV model and an analytic ground effect model. We transfer the model from simulation to a real environment and evaluate on real UAV flights from the EuRoC-MAV dataset, showing that the model is capable of good sim2real generalization performance. The dataset will be made publicly available upon acceptance.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
MoCap-less Quantitative Evaluation of Ego-Pose Estimation Without Ground Truth Measurements
Authors:
Quentin Possamaï,
Steeven Janny,
Guillaume Bono,
Madiha Nadri,
Laurent Bako,
Christian Wolf
Abstract:
The emergence of data-driven approaches for control and planning in robotics have highlighted the need for developing experimental robotic platforms for data collection. However, their implementation is often complex and expensive, in particular for flying and terrestrial robots where the precise estimation of the position requires motion capture devices (MoCap) or Lidar. In order to simplify the…
▽ More
The emergence of data-driven approaches for control and planning in robotics have highlighted the need for developing experimental robotic platforms for data collection. However, their implementation is often complex and expensive, in particular for flying and terrestrial robots where the precise estimation of the position requires motion capture devices (MoCap) or Lidar. In order to simplify the use of a robotic platform dedicated to research on a wide range of indoor and outdoor environments, we present a data validation tool for ego-pose estimation that does not require any equipment other than the on-board camera. The method and tool allow a rapid, visual and quantitative evaluation of the quality of ego-pose sensors and are sensitive to different sources of flaws in the acquisition chain, ranging from desynchronization of the sensor flows to misevaluation of the geometric parameters of the robotic platform. Using computer vision, the information from the sensors is used to calculate the motion of a semantic scene point through its projection to the 2D image space of the on-board camera. The deviations of these keypoints from references created with a semi-automatic tool allow rapid and simple quality assessment of the data collected on the platform. To demonstrate the performance of our method, we evaluate it on two challenging standard UAV datasets as well as one dataset taken from a terrestrial robot.
△ Less
Submitted 1 February, 2022;
originally announced February 2022.
