Showing 1–30 of 30 results for author: Ragusa, E

Orbital dynamics in the GG Tau A system: investigating its enigmatic disc

Authors: Claudia Toci, Simone Ceppi, Nicolás Cuello, Gaspard Duchêne, Enrico Ragusa, Giuseppe Lodato, Francesca Farina, François Ménard, Hossam Aly

Abstract: GG Tau is one of the most studied multiple young stellar systems: GG Tau A is a hierarchical triple surrounded by a massive disc and its companion, GG Tau B, is also a binary. Despite numerous observational attempts, an understanding of the geometry of the GG Tau A system is still elusive. We provide new astrometric measures of the system and we run a set of hydrodynamical simulations with two rep… ▽ More GG Tau is one of the most studied multiple young stellar systems: GG Tau A is a hierarchical triple surrounded by a massive disc and its companion, GG Tau B, is also a binary. Despite numerous observational attempts, an understanding of the geometry of the GG Tau A system is still elusive. We provide new astrometric measures of the system and we run a set of hydrodynamical simulations with two representative orbits to test how they impact a disc composed of dust and gas. We test the dynamical evolution of the two scenarios on short and long timescales. We obtain synthetic flux emission from our simulations and we compare them with 1300 $μ$m ALMA dust continuum emission and 1.67 $μ$m SPHERE dust scattering images to infer the most likely orbital arrangement. We extend the analysis of the binary orbital parameters using six new epochs from archival data, showing that the current measurements alone are not capable of breaking the degeneracy between families of coplanar and misaligned orbits. We found that the time-scale for the onset of the disc eccentricity growth, $τ_{ecc}$, is a fundamental time-scale for the morphology of the system. Results from numerical simulations show that the best match between is obtained with the misaligned configuration ($Δθ= 30^\circ$) on timescales shorter than $τ_{ecc}$. The results exhibit an almost circular cavity and dust ring. However, for both scenarios, the cavity size and its eccentricity quickly grow for timescales longer than $τ_{ecc}$ and the models do not reproduce the observed morphology anymore. This implies that either the age of the system is shorter than $τ_{ecc}$ or that the disc eccentricity growth is not triggered or dissipated. This finding raises questions on the future evolution of the GG Tau A system and, more in general, on the time evolution of eccentric binaries and their circumbinary discs. △ Less

Submitted 11 April, 2024; originally announced April 2024.

Comments: 14 pages, 12 figures

Probing the eccentricity in protostellar discs -- Modeling kinematics and morphologies

Authors: Enrico Ragusa, Elliot Lynch, Guillaume Laibe, Cristiano Longarini, Simone Ceppi

Abstract: Protostellar discs are mostly modelled as circular structures of gas and dust orbiting a protostar. However, a number of physical mechanisms, e.g. the presence of a (sub)stellar companion or initial axial asymmetry, can cause the gas and dust orbital motion to become eccentric. Theoretical studies have revealed that, when present, disc eccentricity is expected to occur with predictable profiles th… ▽ More Protostellar discs are mostly modelled as circular structures of gas and dust orbiting a protostar. However, a number of physical mechanisms, e.g. the presence of a (sub)stellar companion or initial axial asymmetry, can cause the gas and dust orbital motion to become eccentric. Theoretical studies have revealed that, when present, disc eccentricity is expected to occur with predictable profiles that can be long-lasting and potentially observable in protostellar systems. We construct an analytical model predicting the typical features of the kinematics and morphology of eccentric protostellar discs, with the final goal of characterising the observational appearance of eccentricity in discs. We validate the model using a numerical simulation of a circumbinary disc (where the binary makes the disc eccentric). We finally post-process the simulation with Monte Carlo Radiative Transfer to study how eccentric features would appear through the "eyes" of ALMA. Besides the motion of the material on eccentric Keplerian orbits in the disc orbital plane, the most characteristic eccentric feature emerging from the analytical model is strong vertical motion with a typical anti-symmetric pattern (with respect to the disc line of pericentres). A circumbinary disc with a $\approx 40$ au eccentric cavity ($e_{\rm cav}=0.2$), carved by an $a_{\rm bin}=15$ au binary, placed at a distance $d=130$ pc, is expected to host in its upper emission surface vertical oscillations up to $v_{z}\sim 400\, {\rm ms}^{-1}$ close to the cavity edge, i.e. well within ALMA spectral and spatial resolution capabilities. A residual spiral pattern in the vertical velocity $Δv_{z}\sim 150\, {\rm ms}^{-1}$ of the simulation cannot be captured by the theoretical model, we speculate it to be possibly linked to the presence of a companion in the system. △ Less

Submitted 3 April, 2024; originally announced April 2024.

Comments: 20 pages, 15 figures. Accepted for publication in A&A

Journal ref: A&A 686, A264 (2024)

Small and Large Dust Cavities in Disks around mid-M Stars in Taurus

Authors: Yangfan Shi, Feng Long, Gregory J. Herczeg, Daniel Harsono, Yao Liu, Paola Pinilla, Enrico Ragusa, Doug Johnstone, Xue-Ning Bai, Ilaria Pascucci, Carlo F. Manara, Gijs D. Mulders, Lucas A. Cieza

Abstract: High-angular resolution imaging by ALMA has revealed the near-universality and diversity of substructures in protoplanetary disks. However, disks around M-type pre-main-sequence stars are still poorly sampled, despite the prevalence of M-dwarfs in the galaxy. Here we present high-resolution (~50 mas, 8 au) ALMA Band 6 observations of six disks around mid-M stars in Taurus. We detect dust continuum… ▽ More High-angular resolution imaging by ALMA has revealed the near-universality and diversity of substructures in protoplanetary disks. However, disks around M-type pre-main-sequence stars are still poorly sampled, despite the prevalence of M-dwarfs in the galaxy. Here we present high-resolution (~50 mas, 8 au) ALMA Band 6 observations of six disks around mid-M stars in Taurus. We detect dust continuum emission in all six disks, 12CO in five disks, and 13CO line in two disks. The size ratios between gas and dust disks range from 1.6 to 5.1. The ratio of about 5 for 2M0436 and 2M0450 indicates efficient dust radial drift. Four disks show rings and cavities and two disks are smooth. The cavity sizes occupy a wide range: 60 au for 2M0412, and ~10 au for 2M0434, 2M0436 and 2M0508. Detailed visibility modeling indicates that small cavities of 1.7 and 5.7 au may hide in the two smooth disks 2M0450 and CIDA 12. We perform radiative transfer fitting of the infrared SEDs to constrain the cavity sizes, finding that micron-sized dust grains may have smaller cavities than millimeter grains. Planet-disk interactions are the preferred explanation to produce the large 60 au cavity, while other physics could be responsible for the three ~10 au cavities under current observations and theories. Currently, disks around mid-to-late M stars in Taurus show a higher detection frequency of cavities than earlier type stars, although a more complete sample is needed to evaluate any dependence of substructure on stellar mass. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: 25 pages, 6 figures. Accepted for publication in ApJ

The Santa Barbara Binary-Disk Code Comparison

Authors: Paul C. Duffell, Alexander J. Dittmann, Daniel J. D'Orazio, Alessia Franchini, Kaitlin M. Kratter, Anna B. T. Penzlin, Enrico Ragusa, Magdalena Siwek, Christopher Tiede, Haiyang Wang, Jonathan Zrake, Adam M. Dempsey, Zoltan Haiman, Alessandro Lupi, Michal Pirog, Geoffrey Ryan

Abstract: We have performed numerical calculations of a binary interacting with a gas disk, using eleven different numerical methods and a standard binary-disk setup. The goal of this study is to determine whether all codes agree on a numerically converged solution, and to determine the necessary resolution for convergence and the number of binary orbits that must be computed to reach an agreed-upon relaxed… ▽ More We have performed numerical calculations of a binary interacting with a gas disk, using eleven different numerical methods and a standard binary-disk setup. The goal of this study is to determine whether all codes agree on a numerically converged solution, and to determine the necessary resolution for convergence and the number of binary orbits that must be computed to reach an agreed-upon relaxed state of the binary-disk system. We find that all codes can agree on a converged solution (depending on the diagnostic being measured). The zone spacing required for most codes to reach a converged measurement of the torques applied to the binary by the disk is roughly 1% of the binary separation in the vicinity of the binary components. For our disk model to reach a relaxed state, codes must be run for at least 200 binary orbits, corresponding to about a viscous time for our parameters, $0.2 (a^2 Ω_B /ν)$ binary orbits, where $ν$ is the kinematic viscosity. We did not investigate dependence on binary mass ratio, eccentricity, disk temperature, or disk viscosity; therefore, these benchmarks may act as guides towards expanding converged solutions to the wider parameter space but might need to be updated in a future study that investigates dependence on system parameters. We find the most major discrepancies between codes resulted from the dimensionality of the setup (3D vs 2D disks). Beyond this, we find good agreement in the total torque on the binary between codes, although the partition of this torque between the gravitational torque, orbital accretion torque, and spin accretion torque depends sensitively on the sink prescriptions employed. In agreement with previous studies, we find a modest difference in torques and accretion variability between 2D and 3D disk models. We find cavity precession rates to be appreciably faster in 3D than in 2D. △ Less

Submitted 20 June, 2024; v1 submitted 20 February, 2024; originally announced February 2024.

Comments: ApJ Accepted

Affordance segmentation of hand-occluded containers from exocentric images

Authors: Tommaso Apicella, Alessio Xompero, Edoardo Ragusa, Riccardo Berta, Andrea Cavallaro, Paolo Gastaldo

Abstract: Visual affordance segmentation identifies the surfaces of an object an agent can interact with. Common challenges for the identification of affordances are the variety of the geometry and physical properties of these surfaces as well as occlusions. In this paper, we focus on occlusions of an object that is hand-held by a person manipulating it. To address this challenge, we propose an affordance s… ▽ More Visual affordance segmentation identifies the surfaces of an object an agent can interact with. Common challenges for the identification of affordances are the variety of the geometry and physical properties of these surfaces as well as occlusions. In this paper, we focus on occlusions of an object that is hand-held by a person manipulating it. To address this challenge, we propose an affordance segmentation model that uses auxiliary branches to process the object and hand regions separately. The proposed model learns affordance features under hand-occlusion by weighting the feature map through hand and object segmentation. To train the model, we annotated the visual affordances of an existing dataset with mixed-reality images of hand-held containers in third-person (exocentric) images. Experiments on both real and mixed-reality images show that our model achieves better affordance segmentation and generalisation than existing models. △ Less

Submitted 22 August, 2023; originally announced August 2023.

Comments: Paper accepted to Workshop on Assistive Computer Vision and Robotics (ACVR) in International Conference on Computer Vision (ICCV) 2023; 10 pages, 4 figures, 2 tables. Data, code, and trained models are available at https://apicis.github.io/projects/acanet.html

A Large Double-ring Disk around the Taurus M Dwarf J04124068+2438157

Authors: Feng Long, Bin B. Ren, Nicole L. Wallack, Daniel Harsono, Gregory J. Herczeg, Paola Pinilla, Dimitri Mawet, Michael C. Liu, Sean M. Andrews, Xue-Ning Bai, Sylvie Cabrit, Lucas A. Cieza, Doug Johnstone, Jarron M. Leisenring, Giuseppe Lodato, Yao Liu, Carlo F. Manara, Gijs D. Mulders, Enrico Ragusa, Steph Sallum, Yangfan Shi, Marco Tazzari, Taichi Uyama, Kevin Wagner, David J. Wilner , et al. (1 additional authors not shown)

Abstract: Planet formation imprints signatures on the physical structures of disks. In this paper, we present high-resolution ($\sim$50 mas, 8 au) Atacama Large Millimeter/submillimeter Array (ALMA) observations of 1.3 mm dust continuum and CO line emission toward the disk around the M3.5 star 2MASS J04124068+2438157. The dust disk consists only of two narrow rings at radial distances of 0.47 and 0.78 arcse… ▽ More Planet formation imprints signatures on the physical structures of disks. In this paper, we present high-resolution ($\sim$50 mas, 8 au) Atacama Large Millimeter/submillimeter Array (ALMA) observations of 1.3 mm dust continuum and CO line emission toward the disk around the M3.5 star 2MASS J04124068+2438157. The dust disk consists only of two narrow rings at radial distances of 0.47 and 0.78 arcsec ($\sim$70 and 116 au), with Gaussian $σ$ widths of 5.6 and 8.5 au, respectively. The width of the outer ring is smaller than the estimated pressure scale height by $\sim25\%$, suggesting dust trapping in a radial pressure bump. The dust disk size, set by the location of the outermost ring, is significantly larger (by $3σ$) than other disks with similar millimeter luminosity, which can be explained by an early formation of local pressure bump to stop radial drift of millimeter dust grains. After considering the disk's physical structure and accretion properties, we prefer planet--disk interaction over dead zone or photoevaporation models to explain the observed dust disk morphology. We carry out high-contrast imaging at $L'$ band using Keck/NIRC2 to search for potential young planets, but do not identify any source above $5σ$. Within the dust gap between the two rings, we reach a contrast level of $\sim$7 mag, constraining the possible planet below $\sim$2--4 $M_{\rm Jup}$. Analyses of the gap/ring properties suggest a $\sim$Saturn mass planet at $\sim$90 au is likely responsible for the formation of the outer ring, which can be potentially revealed with JWST. △ Less

Submitted 25 March, 2023; originally announced March 2023.

Comments: 15 pages, 5 figures. Accepted for publication in ApJ

Inward and outward migration of massive planets: moving towards a stalling radius

Authors: C. E. Scardoni, C. J. Clarke, G. P. Rosotti, R. A. Booth, R. D. Alexander, E. Ragusa

Abstract: Recent studies on the planet-dominated regime of Type II migration showed that, contrary to the conventional wisdom, massive planets can migrate outwards. Using `fixed-planet' simulations these studies found a correlation between the sign of the torques acting on the planet and the parameter $K'$ (which describes the depth of the gap carved by the planet in the disc). We perform `live-planet' simu… ▽ More Recent studies on the planet-dominated regime of Type II migration showed that, contrary to the conventional wisdom, massive planets can migrate outwards. Using `fixed-planet' simulations these studies found a correlation between the sign of the torques acting on the planet and the parameter $K'$ (which describes the depth of the gap carved by the planet in the disc). We perform `live-planet' simulations exploring a range of $K'$ and disc mass values to test and extend these results. The excitation of planet eccentricity in live-planet simulations breaks the direct dependence of migration rate (rate of change of semi-major axis) on the torques imposed, an effect that `fixed-planet' simulations cannot treat. By disentangling the contribution to the torque due to the semi-major axis evolution from that due to the eccentricity evolution, we recover the relation between the magnitude and sign of migration and $K'$ and argue that this relation may be better expressed in terms of the related gap depth parameter $K$. We present a toy model in which the sign of planetary migration changes at a limiting value of $K$, through which we explore planets' migration in viscously evolving discs. The existence of the torque reversal shapes the planetary system's architecture by accumulating planets either at the stalling radius or in a band around it (defined by the interplay between the planet migration and the disc evolution). In either case, planets pile up in the area $1-10$ au, disfavouring hot Jupiter formation through Type II migration in the planet-dominated regime. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Comments: 16 pages, 14 figures, accepted for publication in MNRAS

Container Localisation and Mass Estimation with an RGB-D Camera

Authors: Tommaso Apicella, Giulia Slavic, Edoardo Ragusa, Paolo Gastaldo, Lucio Marcenaro

Abstract: In the research area of human-robot interactions, the automatic estimation of the mass of a container manipulated by a person leveraging only visual information is a challenging task. The main challenges consist of occlusions, different filling materials and lighting conditions. The mass of an object constitutes key information for the robot to correctly regulate the force required to grasp the co… ▽ More In the research area of human-robot interactions, the automatic estimation of the mass of a container manipulated by a person leveraging only visual information is a challenging task. The main challenges consist of occlusions, different filling materials and lighting conditions. The mass of an object constitutes key information for the robot to correctly regulate the force required to grasp the container. We propose a single RGB-D camera-based method to locate a manipulated container and estimate its empty mass i.e., independently of the presence of the content. The method first automatically selects a number of candidate containers based on the distance with the fixed frontal view, then averages the mass predictions of a lightweight model to provide the final estimation. Results on the CORSMAL Containers Manipulation dataset show that the proposed method estimates empty container mass obtaining a score of 71.08% under different lighting or filling conditions. △ Less

Submitted 2 March, 2022; originally announced March 2022.

Comments: Paper accepted to ICASSP 2022 5 pages, 4 figures, 1 table Code: https://github.com/CORSMAL/Visual Info: https://corsmal.eecs.qmul.ac.uk/challenge.html

Observational constraints on disc sizes in protoplanetary discs in multiple systems in the Taurus region. II. Gas disc sizes

Authors: A. A. Rota, C. F. Manara, A. Miotello, G. Lodato, S. Facchini, M. Koutoulaki, G. Herczeg, F. Long, M. Tazzari, S. Cabrit, D. Harsono, F. Menard, P. Pinilla, G. van der Plas, E. Ragusa, H. -W. Yen

Abstract: The formation of multiple stellar systems is a natural by-product of the star-formation process, and its impact on the properties of protoplanetary discs and on the formation of planets is still to be fully understood. To date, no detailed uniform study of the gas emission from a sample of protoplanetary discs around multiple stellar systems has been performed. Here we analyse new ALMA observation… ▽ More The formation of multiple stellar systems is a natural by-product of the star-formation process, and its impact on the properties of protoplanetary discs and on the formation of planets is still to be fully understood. To date, no detailed uniform study of the gas emission from a sample of protoplanetary discs around multiple stellar systems has been performed. Here we analyse new ALMA observations at a $\sim$21 au resolution of the molecular CO gas emission targeting discs in eight multiple stellar systems in the Taurus star-forming regions. $^{12}$CO gas emission is detected around all primaries and in seven companions. With these data, we estimate the inclination and the position angle for all primary discs and for five secondary or tertiary discs, and measure the gas disc radii of these objects with a cumulative flux technique on the spatially resolved zeroth moment images. When considering the radius including 95\% of the flux as a metric, the estimated gas disc size in multiple stellar systems is found to be on average $\sim 4.2$ times larger than the dust disc size. This ratio is higher than what was recently found in a population of more isolated and single systems. On the contrary, when considering the radius including 68\% of the flux, no difference between multiple and single discs is found in the distribution of ratios. This discrepancy is due to the sharp truncation of the outer dusty disc observed in multiple stellar systems. The measured gas disc sizes are consistent with tidal truncation models in multiple stellar systems assuming eccentricities of $\sim0.15$-$0.5$, as expected in typical binary systems. △ Less

Submitted 10 January, 2022; originally announced January 2022.

Comments: 25 pages, 29 figures, 9 tables. Accepted for publication in A&A

Journal ref: A&A 662, A121 (2022)

The Bardeen-Petterson effect in accreting supermassive black-hole binaries: disc breaking and critical obliquity

Authors: Rebecca Nealon, Enrico Ragusa, Davide Gerosa, Giovanni Rosotti, Riccardo Barbieri

Abstract: The inspiral of supermassive black-hole binaries in gas-rich environment is driven by the presence of an accretion disc and viscous interactions tend to align the spin of the black holes with the orbital angular momentum of the disc. Recent work introduced a new iterative approach to describe the alignment process and the resulting non-linear evolution of the surrounding warped accretion disc. The… ▽ More The inspiral of supermassive black-hole binaries in gas-rich environment is driven by the presence of an accretion disc and viscous interactions tend to align the spin of the black holes with the orbital angular momentum of the disc. Recent work introduced a new iterative approach to describe the alignment process and the resulting non-linear evolution of the surrounding warped accretion disc. Their model predicted that black-hole spins reach either full alignment or a critical obliquity where solutions to the warp equations cease to exist. In this paper, we show that this critical region corresponds to the disc breaking phenomenon, where the disc is disrupted into two or more discrete sections. We use 3D hydrodynamical simulations to (i) recover the predictions of the semi-analytic model and (ii) unveil a richer phenomenology where the disc exhibits either unsuccessful, single and multiple breaks. We additionally identify hydrodynamic effects such as spiral arms that are able to stabilise the disc against breaking beyond criticality. Our results show that when disc breaking occurs, the ability of black holes and disc to align is compromised and in some cases even prevented as the binary inspirals. △ Less

Submitted 15 November, 2021; originally announced November 2021.

Comments: Accepted for publication in MNRAS. 15 pages, 11 figures. Movies of the simulations in this paper can be found at https://youtube.com/playlist?list=PLVCh7-wtOgbJ_NOMDJ3JYOgEAAr0LsJNy

Circumbinary and circumstellar discs around the eccentric binary IRAS 04158+2805 -- a testbed for binary-disc interaction

Authors: Enrico Ragusa, Daniele Fasano, Claudia Toci, Gaspard Duchêne, Nicolás Cuello, Marion Villenave, Gerrit van der Plas, Giuseppe Lodato, François Ménard, Daniel J. Price, Christophe Pinte, Karl Stapelfeldt, Schuyler Wolff

Abstract: IRAS~04158+2805 has long been thought to be a very low mass T-Tauri star (VLMS) surrounded by a nearly edge-on, extremely large disc. Recent observations revealed that this source hosts a binary surrounded by an extended circumbinary disc with a central dust cavity. In this paper, we combine ALMA multi-wavelength observations of continuum and $^{12}$CO line emission, with H$α$ imaging and Keck ast… ▽ More IRAS~04158+2805 has long been thought to be a very low mass T-Tauri star (VLMS) surrounded by a nearly edge-on, extremely large disc. Recent observations revealed that this source hosts a binary surrounded by an extended circumbinary disc with a central dust cavity. In this paper, we combine ALMA multi-wavelength observations of continuum and $^{12}$CO line emission, with H$α$ imaging and Keck astrometric measures of the binary to develop a coherent dynamical model of this system. The system features an azimuthal asymmetry detected at the western edge of the cavity in Band~7 observations and a wiggling outflow. Dust emission in ALMA Band 4 from the proximity of the individual stars suggests the presence of marginally resolved circumstellar discs. We estimate the binary orbital parameters from the measured arc of the orbit from Keck and ALMA astrometry. We further constrain these estimates using considerations from binary-disc interaction theory. We finally perform three SPH gas + dust simulations based on the theoretical constraints; we post-process the hydrodynamic output using radiative transfer Monte Carlo methods and directly compare the models with observations. Our results suggest that a highly eccentric $e\sim 0.5\textrm{--}0.7$ equal mass binary, with a semi-major axis of $\sim 55$ au, and small/moderate orbital plane vs. circumbinary disc inclination $θ\lesssim 30^\circ$ provides a good match with observations. A dust mass of $\sim 1.5\times 10^{-4} {\rm M_\odot}$ best reproduces the flux in Band 7 continuum observations. Synthetic CO line emission maps qualitatively capture both the emission from the central region and the non-Keplerian nature of the gas motion in the binary proximity. △ Less

Submitted 28 July, 2021; originally announced July 2021.

Comments: 19 pages, 14 figures, 1 table, accepted for publication in MNRAS

The Architecture of the V892 Tau System: the Binary and its Circumbinary Disk

Authors: Feng Long, Sean M. Andrews, Justin Vega, David J. Wilner, Claire J. Chandler, Enrico Ragusa, Richard Teague, Laura M. Pérez, Nuria Calvet, John M. Carpenter, Thomas Henning, Woojin Kwon, Hendrik Linz, Luca Ricci

Abstract: We present high resolution millimeter continuum and CO line observations for the circumbinary disk around V892 Tau to constrain the stellar and disk properties. The total mass of the two near-equal-mass A stars is estimated to be $6.0\pm0.2\,M_{\odot}$ based on our models of the Keplerian-dominated gas disk rotation. The detection of strong ionized gas emission associated with the two stars at 8 m… ▽ More We present high resolution millimeter continuum and CO line observations for the circumbinary disk around V892 Tau to constrain the stellar and disk properties. The total mass of the two near-equal-mass A stars is estimated to be $6.0\pm0.2\,M_{\odot}$ based on our models of the Keplerian-dominated gas disk rotation. The detection of strong ionized gas emission associated with the two stars at 8 mm, when combined with previous astrometric measurements in the near-infrared, provides an updated view of the binary orbit with $a=7.1\pm0.1$ au, $e=0.27\pm0.1$, and $P=7.7\pm0.2$ yr, which is about half of a previously reported orbital period. The binary orbital plane is proposed to be near coplanar to the circumbinary disk plane (with a mutual inclination of only $Δ=8\pm4.2$ deg; another solution with $Δ=113$ deg is less likely given the short re-alignment timescale). An asymmetric dust disk ring peaking at a radius of 0.''2 is detected at 1.3 mm and its fainter counterparts are also detected at the longer 8 and 9.8 mm. The CO gas disk, though dominated by Keplerian rotation, presents a mild inner and outer disk misalignment, such that the inner disk to the SW and outer disk to the NE appear brighter than their counterparts at the opposite disk sides. The radial extension of the disk, its asymmetric dust ring, and the presence of a disk warp could all be explained by the interaction between the eccentric binary and the circumbinary disk, which we assume were formed with non-zero mutual inclination. Some tentatively detected gas spirals in the outer disk are likely produced by interactions with the low mass tertiary component located 4'' to the northeast. Our analyses demonstrate the promising usage of V892 Tau as an excellent benchmark system to study the details of binary--disk interactions. △ Less

Submitted 6 May, 2021; originally announced May 2021.

Comments: Accepted for publication in ApJ

On the diversity of asymmetries in gapped protoplanetary disks

Authors: Nienke van der Marel, Til Birnstiel, Antonio Garufi, Enrico Ragusa, Valentin Christiaens, Daniel Price, Steph Sallum, Dhruv Muley, Logan Francis, Ruobing Dong

Abstract: Protoplanetary disks with large inner dust cavities are thought to host massive planetary or substellar companions. These disks show asymmetries and rings in the millimeter continuum, caused by dust trapping in pressure bumps, and potentially vortices or horseshoes. The origin of the asymmetries and their diversity remains unclear. We present a comprehensive study of 16 disks for which the gas sur… ▽ More Protoplanetary disks with large inner dust cavities are thought to host massive planetary or substellar companions. These disks show asymmetries and rings in the millimeter continuum, caused by dust trapping in pressure bumps, and potentially vortices or horseshoes. The origin of the asymmetries and their diversity remains unclear. We present a comprehensive study of 16 disks for which the gas surface density profile has been constrained by CO isotopologue data. We compare the azimuthal extents of the dust continuum profiles with the local gas surface density in each disk, and find that the asymmetries correspond to higher Stokes numbers or low gas surface density. We discuss which asymmetric structures can be explained by a horseshoe, a vortex or spiral density waves. Second, we reassess the gas gap radii from the $^{13}$CO maps, which are about a factor 2 smaller than the dust ring radii, suggesting that companions in these disks are in the brown dwarf mass regime ($\sim 15-50 M_{\rm Jup}$) or in the Super-Jovian mass regime ($\sim 3-15 M_{\rm Jup}$) on eccentric orbits. This is consistent with the estimates from contrast curves on companion mass limits. These curves rule out (sub)stellar companions ($q>$0.05) for the majority of the sample at the gap location, but it remains possible at even smaller radii. Third, we find that spiral arms in scattered light images are primarily detected around high luminosity stars with disks with wide gaps, which can be understood by the dependence of the spiral arm pitch angle on disk temperature and companion mass. △ Less

Submitted 22 October, 2020; v1 submitted 20 October, 2020; originally announced October 2020.

Comments: 36 pages, 16 figures. Accepted by the Astronomical Journal. Version 2 has fixed Figure 11 for which the subplots got mixed up

The evolution of large cavities and disc eccentricity in circumbinary discs

Authors: Enrico Ragusa, Richard Alexander, Josh Calcino, Kieran Hirsh, Daniel J. Price

Abstract: We study the mutual evolution of the orbital properties of high mass ratio, circular, co-planar binaries and their surrounding discs, using 3D Smoothed Particle Hydrodynamics simulations. We investigate the evolution of binary and disc eccentricity, cavity structure and the formation of orbiting azimuthal over-dense features in the disc. Even with circular initial conditions, all discs with mass r… ▽ More We study the mutual evolution of the orbital properties of high mass ratio, circular, co-planar binaries and their surrounding discs, using 3D Smoothed Particle Hydrodynamics simulations. We investigate the evolution of binary and disc eccentricity, cavity structure and the formation of orbiting azimuthal over-dense features in the disc. Even with circular initial conditions, all discs with mass ratios $q>0.05$ develop eccentricity. We find that disc eccentricity grows abruptly after a relatively long time-scale ($\sim 400\textrm{--}700$ binary orbits), and is associated with a very small increase in the binary eccentricity. When disc eccentricity grows, the cavity semi-major axis reaches values $a_{\rm cav}\approx 3.5\, a_{\rm bin}$. We also find that the disc eccentricity correlates linearly with the cavity size. Viscosity and orbit crossing, appear to be responsible for halting the disc eccentricity growth -- eccentricity at the cavity edge in the range $e_{\rm cav}\sim 0.05\textrm{--} 0.35$. Our analysis shows that the current theoretical framework cannot fully explain the origin of these evolutionary features when the binary is almost circular ($e_{\rm bin}\lesssim 0.01$); we speculate about alternative explanations. As previously observed, we find that the disc develops an azimuthal over-dense feature in Keplerian motion at the edge of the cavity. A low contrast over-density still co-moves with the flow after 2000 binary orbits; such an over-density can in principle cause significant dust trapping, with important consequences for protoplanetary disc observations. △ Less

Submitted 28 July, 2021; v1 submitted 22 September, 2020; originally announced September 2020.

Comments: 20 pages, 17 figures, 1 table, accepted for publication in MNRAS

On the cavity size in circumbinary discs

Authors: Kieran Hirsh, Daniel J Price, Jean-François Gonzalez, M. Giulia Ubeira-Gabellini, Enrico Ragusa

Abstract: How does the cavity size in circumbinary discs depend on disc and binary properties? We investigate by simulating disc cavities carved by binary companions using smoothed particle hydrodynamics (SPH). We find that a cavity is quickly opened on the dynamical time, while the cavity size is set on the viscous time. In agreement with previous findings, we find long term cavity sizes of 2-5 times the b… ▽ More How does the cavity size in circumbinary discs depend on disc and binary properties? We investigate by simulating disc cavities carved by binary companions using smoothed particle hydrodynamics (SPH). We find that a cavity is quickly opened on the dynamical time, while the cavity size is set on the viscous time. In agreement with previous findings, we find long term cavity sizes of 2-5 times the binary semi-major axis, increasing with eccentricity and decreasing with disc aspect ratio. When considering binaries inclined with respect to the disc we find three regimes: i) discs that evolve towards a coplanar orbit have a large cavity, slightly smaller than that of an initially coplanar disc; ii) discs that evolve towards a polar orbit by breaking have a small cavity, equal in size to that of an initially polar disc; iii) discs that evolve towards a polar orbit via warping have an intermediate-sized cavity. We find typical gas depletions inside the cavity of $\gtrsim 2$ orders of magnitude in surface density. △ Less

Submitted 18 August, 2020; originally announced August 2020.

Comments: 12 pages, 13 figures, accepted to MNRAS

Dual-Wavelength ALMA Observations of Dust Rings in Protoplanetary Disks

Authors: Feng Long, Paola Pinilla, Gregory J. Herczeg, Sean M. Andrews, Daniel Harsono, Doug Johnstone, Enrico Ragusa, Ilaria Pascucci, David J. Wilner, Nathan Hendler, Jeff Jennings, Yao Liu, Giuseppe Lodato, Francois Menard, Gerrit van de Plas, Giovanni Dipierro

Abstract: We present new Atacama Large Millimeter/submillimeter Array (ALMA) observations for three protoplanetary disks in Taurus at 2.9\,mm and comparisons with previous 1.3\,mm data both at an angular resolution of $\sim0.''1$ (15\,au for the distance of Taurus). In the single-ring disk DS Tau, double-ring disk GO Tau, and multiple-ring disk DL Tau, the same rings are detected at both wavelengths, with r… ▽ More We present new Atacama Large Millimeter/submillimeter Array (ALMA) observations for three protoplanetary disks in Taurus at 2.9\,mm and comparisons with previous 1.3\,mm data both at an angular resolution of $\sim0.''1$ (15\,au for the distance of Taurus). In the single-ring disk DS Tau, double-ring disk GO Tau, and multiple-ring disk DL Tau, the same rings are detected at both wavelengths, with radial locations spanning from 50 to 120\,au. To quantify the dust emission morphology, the observed visibilities are modeled with a parametric prescription for the radial intensity profile. The disk outer radii, taken as 95\% of the total flux encircled in the model intensity profiles, are consistent at both wavelengths for the three disks. Dust evolution models show that dust trapping in local pressure maxima in the outer disk could explain the observed patterns. Dust rings are mostly unresolved. The marginally resolved ring in DS Tau shows a tentatively narrower ring at the longer wavelength, an observational feature expected from efficient dust trapping. The spectral index ($α_{\rm mm}$) increases outward and exhibits local minima that correspond to the peaks of dust rings, indicative of the changes in grain properties across the disks. The low optical depths ($τ\sim$0.1--0.2 at 2.9\,mm and 0.2--0.4 at 1.3\,mm) in the dust rings suggest that grains in the rings may have grown to millimeter sizes. The ubiquitous dust rings in protoplanetary disks modify the overall dynamics and evolution of dust grains, likely paving the way towards the new generation of planet formation. △ Less

Submitted 4 June, 2020; originally announced June 2020.

Comments: accepted for publication in ApJ

Is the gap in the DS Tau disc hiding a planet?

Authors: Benedetta Veronesi, Enrico Ragusa, Giuseppe Lodato, Hossam Aly, Christophe Pinte, Daniel J. Price, Feng Long, Gregory J. Herczeg, Valentin Christiaens

Abstract: Recent mm-wavelength surveys performed with the Atacama Large Millimeter Array (ALMA) have revealed protoplanetary discs characterized by rings and gaps. A possible explanation for the origin of such rings is the tidal interaction with an unseen planetary companion. The protoplanetary disc around DS Tau shows a wide gap in the ALMA observation at 1.3 mm. We construct a hydrodynamical model for the… ▽ More Recent mm-wavelength surveys performed with the Atacama Large Millimeter Array (ALMA) have revealed protoplanetary discs characterized by rings and gaps. A possible explanation for the origin of such rings is the tidal interaction with an unseen planetary companion. The protoplanetary disc around DS Tau shows a wide gap in the ALMA observation at 1.3 mm. We construct a hydrodynamical model for the dust continuum observed by ALMA assuming the observed gap is carved by a planet between one and five Jupiter masses. We fit the shape of the radial intensity profile along the disc major axis varying the planet mass, the dust disc mass, and the evolution time of the system. The best fitting model is obtained for a planet with $M_{\rm p}=3.5\,M_{\rm Jup}$ and a disc with $M_{\rm dust}= 9.6\cdot10^{-5}\,M_{\odot}$. Starting from this result, we also compute the expected signature of the planet in the gas kinematics, as traced by CO emission. We find that such a signature (in the form of a "kink" in the channel maps) could be observed by ALMA with a velocity resolution between $0.2-0.5\,\rm{kms}^{-1}$ and a beam size between 30 and 50 mas. △ Less

Submitted 8 May, 2020; originally announced May 2020.

Comments: 16 pages, 15 figures, accepted for publication on MNRAS

Signatures of an eccentric disc cavity: Dust and gas in IRS 48

Authors: Josh Calcino, Daniel J. Price, Christophe Pinte, Nienke van der Marel, Enrico Ragusa, Giovanni Dipierro, Nicolas Cuello, Valentin Christiaens

Abstract: We test the hypothesis that the disc cavity in the `transition disc' Oph IRS 48 is carved by an unseen binary companion. We use 3D dust-gas smoothed-particle hydrodynamics simulations to demonstrate that marginally coupled dust grains concentrate in the gas over-density that forms in in the cavity around a low binary mass ratio binary. This produces high contrast ratio dust asymmetries at the cavi… ▽ More We test the hypothesis that the disc cavity in the `transition disc' Oph IRS 48 is carved by an unseen binary companion. We use 3D dust-gas smoothed-particle hydrodynamics simulations to demonstrate that marginally coupled dust grains concentrate in the gas over-density that forms in in the cavity around a low binary mass ratio binary. This produces high contrast ratio dust asymmetries at the cavity edge similar to those observed in the disc around IRS 48 and other transition discs. This structure was previously assumed to be a vortex. However, we show that the observed velocity map of IRS 48 displays a peculiar asymmetry that is not predicted by the vortex hypothesis. We show the unusual kinematics are naturally explained by the non-Keplerian flow of gas in an eccentric circumbinary cavity. We further show that perturbations observed in the isovelocity curves of IRS 48 may be explained as the product of the dynamical interaction between the companion and the disc. The presence of a $\sim$0.4 M$_{\odot}$ companion at a $\sim$10 au separation can qualitatively explain these observations. High spatial resolution line and continuum imaging should be able to confirm this hypothesis. △ Less

Submitted 30 September, 2019; originally announced October 2019.

Comments: 9 pages, 7 figures, accepted for publication in MNRAS

Multi-wavelength observations of protoplanetary discs as a proxy for the gas disc mass

Authors: B. Veronesi, G. Lodato, G. Dipierro, E. Ragusa, C. Hall, D. J. Price

Abstract: Recent observations of protoplanetary discs reveal disc substructures potentially caused by embedded planets. We investigate how the gas surface density in discs changes the observed morphology in scattered light and dust continuum emission. Assuming that disc substructures are due to embedded protoplanets, we combine hydrodynamical modelling with radiative transfer simulations of dusty protoplane… ▽ More Recent observations of protoplanetary discs reveal disc substructures potentially caused by embedded planets. We investigate how the gas surface density in discs changes the observed morphology in scattered light and dust continuum emission. Assuming that disc substructures are due to embedded protoplanets, we combine hydrodynamical modelling with radiative transfer simulations of dusty protoplanetary discs hosting planets. The response of different dust species to the gravitational perturbation induced by a planet depends on the drag stopping time - a function of the generally unknown local gas density. Small dust grains, being stuck to the gas, show spirals. Larger grains decouple, showing progressively more axisymmetric (ring-like) substructure as decoupling increases with grain size or with the inverse of the gas disc mass. We show that simultaneous modelling of scattered light and dust continuum emission is able to constrain the Stokes number, ${\rm St}$. Hence, if the dust properties are known, this constrains the local gas surface density, $Σ_{\rm gas}$, at the location of the structure, and hence the total gas mass. In particular, we found that observing ring-like structures in mm-emitting grains requires ${\rm St} \gtrsim 0.4$ and therefore $Σ_{\rm gas} \lesssim 0.4\,\textrm{g/cm}^{2}$. We apply this idea to observed protoplanetary discs showing substructures both in scattered light and in the dust continuum. △ Less

Submitted 23 August, 2019; originally announced August 2019.

Comments: Accepted for publication on MNRAS, 12 pages, 6 figures

Observational constraints on dust disk sizes in tidally truncated protoplanetary disks in multiple systems in the Taurus region

Authors: C. F. Manara, M. Tazzari, F. Long, G. J. Herczeg, G. Lodato, A. A. Rota, P. Cazzoletti, G. van der Plas, P. Pinilla, G. Dipierro, S. Edwards, D. Harsono, D. Johnstone, Y. Liu, F. Menard, B. Nisini, E. Ragusa, Y. Boehler, S. Cabrit

Abstract: The impact of stellar multiplicity on the evolution of planet-forming disks is still the subject of debate. Here we present and analyze disk structures around ten multiple stellar systems that were included in an unbiased, high spatial resolution survey performed with ALMA of 32 protoplanetary disks in the Taurus star-forming region. At the unprecedented spatial resolution of ~0.12" we detect and… ▽ More The impact of stellar multiplicity on the evolution of planet-forming disks is still the subject of debate. Here we present and analyze disk structures around ten multiple stellar systems that were included in an unbiased, high spatial resolution survey performed with ALMA of 32 protoplanetary disks in the Taurus star-forming region. At the unprecedented spatial resolution of ~0.12" we detect and spatially resolve the disks around all primary stars, and those around eight secondary and one tertiary star. The dust radii of disks around multiple stellar systems are smaller than those around single stars in the same stellar mass range and in the same region. The disks in multiple stellar systems also show a steeper decay of the millimeter continuum emission at the outer radius than disks around single stars, suggestive of the impact of tidal truncation on the shape of the disks in multiple systems. However, the observed ratio between the dust disk radii and the observed separation of the stars in the multiple systems is consistent with analytic predictions of the effect of tidal truncation only if the eccentricities of the binaries are rather high (typically >0.5), or if the observed dust radii are a factor of two smaller than the gas radii, as is typical for isolated systems. Similar high-resolution studies targeting the gaseous emission from disks in multiple stellar systems are required to resolve this question. △ Less

Submitted 18 July, 2019; v1 submitted 8 July, 2019; originally announced July 2019.

Comments: Accepted on Astronomy & Astrophysics; 15 pages plus appendix, revised version after language editing

Journal ref: A&A 628, A95 (2019)

Compact Disks in a High Resolution ALMA Survey of Dust Structures in the Taurus Molecular Cloud

Authors: Feng Long, Gregory J. Herczeg, Daniel Harsono, Paola Pinilla, Marco Tazzari, Carlo F. Manara, Ilaria Pascucci, Sylvie Cabrit, Brunella Nisini, Doug Johnstone, Suzan Edwards, Colette Salyk, Francois Menard, Giuseppe Lodato, Yann Boehler, Gregory N. Mace, Yao Liu, Gijs D. Mulders, Nathanial Hendler, Enrico Ragusa, William J. Fischer, Andrea Banzatti, Elisabetta Rigliaco, Gerrit van der Plas, Giovanni Dipierro , et al. (2 additional authors not shown)

Abstract: We present a high-resolution ($\sim0.''12$, $\sim16$ au, mean sensitivity of $50~μ$Jy~beam$^{-1}$ at 225 GHz) snapshot survey of 32 protoplanetary disks around young stars with spectral type earlier than M3 in the Taurus star-forming region using Atacama Large Millimeter Array (ALMA). This sample includes most mid-infrared excess members that were not previously imaged at high spatial resolution,… ▽ More We present a high-resolution ($\sim0.''12$, $\sim16$ au, mean sensitivity of $50~μ$Jy~beam$^{-1}$ at 225 GHz) snapshot survey of 32 protoplanetary disks around young stars with spectral type earlier than M3 in the Taurus star-forming region using Atacama Large Millimeter Array (ALMA). This sample includes most mid-infrared excess members that were not previously imaged at high spatial resolution, excluding close binaries and highly extincted objects, thereby providing a more representative look at disk properties at 1--2 Myr. Our 1.3 mm continuum maps reveal 12 disks with prominent dust gaps and rings, 2 of which are around primary stars in wide binaries, and 20 disks with no resolved features at the observed resolution (hereafter smooth disks), 8 of which are around the primary star in wide binaries. The smooth disks were classified based on their lack of resolved substructures, but their most prominent property is that they are all compact with small effective emission radii ($R_{\rm eff,95\%} \lesssim 50$ au). In contrast, all disks with $R_{\rm eff,95\%}$ of at least 55 au in our sample show detectable substructures. Nevertheless, their inner emission cores (inside the resolved gaps) have similar peak brightness, power law profiles, and transition radii to the compact smooth disks, so the primary difference between these two categories is the lack of outer substructures in the latter. These compact disks may lose their outer disk through fast radial drift without dust trapping, or they might be born with small sizes. The compact dust disks, as well as the inner disk cores of extended ring disks, that look smooth at the current resolution will likely show small-scale or low-contrast substructures at higher resolution. The correlation between disk size and disk luminosity correlation demonstrates that some of the compact disks are optically thick at millimeter wavelengths. △ Less

Submitted 25 June, 2019; originally announced June 2019.

Comments: ApJ accepted, 25 pages, 11 figures

A dust and gas cavity in the disc around CQ Tau revealed by ALMA

Authors: M. Giulia Ubeira Gabellini, Anna Miotello, Stefano Facchini, Enrico Ragusa, Giuseppe Lodato, Leonardo Testi, Myriam Benisty, Simon Bruderer, Nicolàs T. Kurtovic, Sean Andrews, John Carpenter, Stuartt A. Corder, Giovanni Dipierro, Barbara Ercolano, Davide Fedele, Greta Guidi, Thomas Henning, Andrea Isella, Woojin Kwon, Hendrik Linz, Melissa McClure, Laura Perez, Luca Ricci, Giovanni Rosotti, Marco Tazzari , et al. (1 additional authors not shown)

Abstract: The combination of high resolution and sensitivity offered by ALMA is revolutionizing our understanding of protoplanetary discs, as their bulk gas and dust distributions can be studied independently. In this paper we present resolved ALMA observations of the continuum emission ($λ=1.3$ mm) and CO isotopologues ($^{12}$CO, $^{13}$CO, C$^{18}$O $J=2-1$) integrated intensity from the disc around the… ▽ More The combination of high resolution and sensitivity offered by ALMA is revolutionizing our understanding of protoplanetary discs, as their bulk gas and dust distributions can be studied independently. In this paper we present resolved ALMA observations of the continuum emission ($λ=1.3$ mm) and CO isotopologues ($^{12}$CO, $^{13}$CO, C$^{18}$O $J=2-1$) integrated intensity from the disc around the nearby ($d = 162$ pc), intermediate mass ($M_{\star}=1.67\,M_{\odot}$) pre-main-sequence star CQ Tau. The data show an inner depression in continuum, and in both $^{13}$CO and C$^{18}$O emission. We employ a thermo-chemical model of the disc reproducing both continuum and gas radial intensity profiles, together with the disc SED. The models show that a gas inner cavity with size between 15 and 25 au is needed to reproduce the data with a density depletion factor between $\sim 10^{-1}$ and $\sim 10^{-3}$. The radial profile of the distinct cavity in the dust continuum is described by a Gaussian ring centered at $R_{\rm dust}=53\,$au and with a width of $σ=13\,$au. Three dimensional gas and dust numerical simulations of a disc with an embedded planet at a separation from the central star of $\sim20\,$au and with a mass of $\sim 6\textrm{-} 9\,M_{\rm Jup}$ reproduce qualitatively the gas and dust profiles of the CQ Tau disc. However, a one planet model appears not to be able to reproduce the dust Gaussian density profile predicted using the thermo-chemical modeling. △ Less

Submitted 2 May, 2019; originally announced May 2019.

The newborn planet population emerging from ring-like structures in discs

Authors: G. Lodato, G. Dipierro, E. Ragusa, F. Long, G. J. Herczeg, I. Pascucci, P. Pinilla, C. F. Manara, M. Tazzari, Y. Liu, G. D. Mulders, D. Harsono, Y. Boehler, F. Menard, D. Johnstone, C. Salyk, G. van der Plas, S. Cabrit, S. Edwards, W. J. Fischer, N. Hendler, B. Nisini, E. Rigliaco, H. Avenhaus, A. Banzatti , et al. (1 additional authors not shown)

Abstract: ALMA has observed a plethora of ring-like structures in planet forming discs at distances of 10-100 au from their host star. Although several mechanisms have been invoked to explain the origin of such rings, a common explanation is that they trace new-born planets. Under the planetary hypothesis, a natural question is how to reconcile the apparently high frequency of gap-carving planets at 10-100… ▽ More ALMA has observed a plethora of ring-like structures in planet forming discs at distances of 10-100 au from their host star. Although several mechanisms have been invoked to explain the origin of such rings, a common explanation is that they trace new-born planets. Under the planetary hypothesis, a natural question is how to reconcile the apparently high frequency of gap-carving planets at 10-100 au with the paucity of Jupiter mass planets observed around main sequence stars at those separations. Here, we provide an analysis of the new-born planet population emerging from observations of gaps in discs, under the assumption that the observed gaps are due to planets. We use a simple estimate of the planet mass based on the gap morphology, and apply it to a sample of gaps recently obtained by us in a survey of Taurus with ALMA. We also include additional data from recent published surveys, thus analysing the largest gap sample to date, for a total of 48 gaps. The properties of the purported planets occupy a distinctively different region of parameter space with respect to the known exo-planet population, currently not accessible through planet finding methods. Thus, no discrepancy in the mass and radius distribution of the two populations can be claimed at this stage. We show that the mass of the inferred planets conforms to the theoretically expected trend for the minimum planet mass needed to carve a dust gap. Finally, we estimate the separation and mass of the putative planets after accounting for migration and accretion, for a range of evolutionary times, finding a good match with the distribution of cold Jupiters. △ Less

Submitted 12 March, 2019; originally announced March 2019.

Comments: 9 pages, 5 figures, re-submitted to MNRAS after referee's comments

The Ring Structure in the MWC 480 Disk Revealed by ALMA

Authors: Yao Liu, Giovanni Dipierro, Enrico Ragusa, Giuseppe Lodato, Gregory J. Herczeg, Feng Long, Daniel Harsono, Yann Boehler, Francois Menard, Doug Johnstone, Ilaria Pascucci, Paola Pinilla, Colette Salyk, Gerrit van der Plas, Sylvie Cabrit, William J. Fischer, Nathan Hendler, Carlo F. Manara, Brunella Nisini, Elisabetta Rigliaco, Henning Avenhaus, Andrea Banzatti, Michael Gully-Santiago

Abstract: Gap-like structures in protoplanetary disks are likely related to planet formation processes. In this paper, we present and analyze high resolution (0.17*0.11 arcsec) 1.3 mm ALMA continuum observations of the protoplanetary disk around the Herbig Ae star MWC 480. Our observations for the first time show a gap centered at ~74au with a width of ~23au, surrounded by a bright ring centered at ~98au fr… ▽ More Gap-like structures in protoplanetary disks are likely related to planet formation processes. In this paper, we present and analyze high resolution (0.17*0.11 arcsec) 1.3 mm ALMA continuum observations of the protoplanetary disk around the Herbig Ae star MWC 480. Our observations for the first time show a gap centered at ~74au with a width of ~23au, surrounded by a bright ring centered at ~98au from the central star. Detailed radiative transfer modeling of both the ALMA image and the broadband spectral energy distribution is used to constrain the surface density profile and structural parameters of the disk. If the width of the gap corresponds to 4~8 times the Hill radius of a single forming planet, then the putative planet would have a mass of 0.4~3 M_Jup. We test this prediction by performing global three-dimensional smoothed particle hydrodynamic gas/dust simulations of disks hosting a migrating and accreting planet. We find that the dust emission across the disk is consistent with the presence of an embedded planet with a mass of ~2.3 M_Jup at an orbital radius of ~78au. Given the surface density of the best-fit radiative transfer model, the amount of depleted mass in the gap is higher than the mass of the putative planet, which satisfies the basic condition for the formation of such a planet. △ Less

Submitted 7 November, 2018; originally announced November 2018.

Comments: Accepted for publication in A&A, 11 pages, 8 figures

Journal ref: A&A 622, A75 (2019)

Gaps and Rings in an ALMA Survey of Disks in the Taurus Star-forming Region

Authors: Feng Long, Paola Pinilla, Gregory J. Herczeg, Daniel Harsono, Giovanni Dipierro, Ilaria Pascucci, Nathan Hendler, Marco Tazzari, Enrico Ragusa, Colette Salyk, Suzan Edwards, Giuseppe Lodato, Gerrit van de Plas, Doug Johnstone, Yao Liu, Yann Boehler, Sylvie Cabrit, Carlo F. Manara, Francois Menard, Gijs D. Mulders, Brunella Nisini, William J. Fischer, Elisabetta Rigliaco, Andrea Banzatti, Henning Avenhaus , et al. (1 additional authors not shown)

Abstract: Rings are the most frequently revealed substructure in ALMA dust observations of protoplanetary disks, but their origin is still hotly debated. In this paper, we identify dust substructures in 12 disks and measure their properties to investigate how they form. This subsample of disks is selected from a high-resolution ($\sim0.12''$) ALMA 1.33 mm survey of 32 disks in the Taurus star-forming region… ▽ More Rings are the most frequently revealed substructure in ALMA dust observations of protoplanetary disks, but their origin is still hotly debated. In this paper, we identify dust substructures in 12 disks and measure their properties to investigate how they form. This subsample of disks is selected from a high-resolution ($\sim0.12''$) ALMA 1.33 mm survey of 32 disks in the Taurus star-forming region, which was designed to cover a wide range of sub-mm brightness and to be unbiased to previously known substructures. While axisymmetric rings and gaps are common within our sample, spiral patterns and high contrast azimuthal asymmetries are not detected. Fits of disk models to the visibilities lead to estimates of the location and shape of gaps and rings, the flux in each disk component, and the size of the disk. The dust substructures occur across a wide range of stellar mass and disk brightness. Disks with multiple rings tend to be more massive and more extended. The correlation between gap locations and widths, the intensity contrast between rings and gaps, and the separations of rings and gaps could all be explained if most gaps are opened by low-mass planets (super-Earths and Neptunes) in the condition of low disk turbulence ($α=10^{-4}$). The gap locations are not well correlated with the expected locations of CO and N$_2$ ice lines, so condensation fronts are unlikely to be a universal mechanism to create gaps and rings, though they may play a role in some cases. △ Less

Submitted 14 October, 2018; originally announced October 2018.

Comments: 23 pages, 11 figures, ApJ accepted

Circumbinary, not transitional: On the spiral arms, cavity, shadows, fast radial flows, streamers and horseshoe in the HD142527 disc

Authors: Daniel J. Price, Nicolas Cuello, Christophe Pinte, Daniel Mentiplay, Simon Casassus, Valentin Christiaens, Grant M. Kennedy, Jorge Cuadra, Sebastian Perez M., Sebastian Marino, Philip J. Armitage, Alice Zurlo, Attila Juhasz, Enrico Ragusa, Guillaume Laibe, Giuseppe Lodato

Abstract: We present 3D hydrodynamical models of the HD142527 protoplanetary disc, a bright and well studied disc that shows spirals and shadows in scattered light around a 100 au gas cavity, a large horseshoe dust structure in mm continuum emission, together with mysterious fast radial flows and streamers seen in gas kinematics. By considering several possible orbits consistent with the observed arc, we sh… ▽ More We present 3D hydrodynamical models of the HD142527 protoplanetary disc, a bright and well studied disc that shows spirals and shadows in scattered light around a 100 au gas cavity, a large horseshoe dust structure in mm continuum emission, together with mysterious fast radial flows and streamers seen in gas kinematics. By considering several possible orbits consistent with the observed arc, we show that all of the main observational features can be explained by one mechanism - the interaction between the disc and the observed binary companion. We find that the spirals, shadows and horseshoe are only produced in the correct position angles by a companion on an inclined and eccentric orbit approaching periastron - the 'red' family from Lacour et al. (2016). Dust-gas simulations show radial and azimuthal concentration of dust around the cavity, consistent with the observed horseshoe. The success of this model in the HD142527 disc suggests other mm-bright transition discs showing cavities, spirals and dust asymmetries may also be explained by the interaction with central companions. △ Less

Submitted 6 March, 2018; originally announced March 2018.

Comments: 16 pages, 12 figures, accepted to MNRAS. Movies at http://users.monash.edu.au/~dprice/pubs/HD142527/

Eccentricity evolution during planet-disc interaction

Authors: Enrico Ragusa, Giovanni Rosotti, Jean Teyssandier, Richard Booth, Cathie J. Clarke, Giuseppe Lodato

Abstract: During the process of planet formation, the planet-discs interactions might excite (or damp) the orbital eccentricity of the planet. In this paper, we present two long ($t\sim 3\times 10^5$ orbits) numerical simulations: (a) one (with a relatively light disc, $M_{\rm d}/M_{\rm p}=0.2$) where the eccentricity initially stalls before growing at later times and (b) one (with a more massive disc,… ▽ More During the process of planet formation, the planet-discs interactions might excite (or damp) the orbital eccentricity of the planet. In this paper, we present two long ($t\sim 3\times 10^5$ orbits) numerical simulations: (a) one (with a relatively light disc, $M_{\rm d}/M_{\rm p}=0.2$) where the eccentricity initially stalls before growing at later times and (b) one (with a more massive disc, $M_{\rm d}/M_{\rm p}=0.65$) with fast growth and a late decrease of the eccentricity. We recover the well-known result that a more massive disc promotes a faster initial growth of the planet eccentricity. However, at late times the planet eccentricity decreases in the massive disc case, but increases in the light disc case. Both simulations show periodic eccentricity oscillations superimposed on a growing/decreasing trend and a rapid transition between fast and slow pericentre precession. The peculiar and contrasting evolution of the eccentricity of both planet and disc in the two simulations can be understood by invoking a simple toy model where the disc is treated as a second point-like gravitating body, subject to secular planet-planet interaction and eccentricity pumping/damping provided by the disc. We show how the counterintuitive result that the more massive simulation produces a lower planet eccentricity at late times can be understood in terms of the different ratios of the disc-to-planet angular momentum in the two simulations. In our interpretation, at late times the planet eccentricity can increase more in low-mass discs rather than in high-mass discs, contrary to previous claims in the literature. △ Less

Submitted 30 November, 2017; originally announced December 2017.

Comments: 18 pages, 13 figures, accepted for publication in MNRAS

Phantom: A smoothed particle hydrodynamics and magnetohydrodynamics code for astrophysics

Authors: Daniel J. Price, James Wurster, Terrence S. Tricco, Chris Nixon, Stéven Toupin, Alex Pettitt, Conrad Chan, Daniel Mentiplay, Guillaume Laibe, Simon Glover, Clare Dobbs, Rebecca Nealon, David Liptai, Hauke Worpel, Clément Bonnerot, Giovanni Dipierro, Giulia Ballabio, Enrico Ragusa, Christoph Federrath, Roberto Iaconi, Thomas Reichardt, Duncan Forgan, Mark Hutchison, Thomas Constantino, Ben Ayliffe , et al. (2 additional authors not shown)

Abstract: We present Phantom, a fast, parallel, modular and low-memory smoothed particle hydrodynamics and magnetohydrodynamics code developed over the last decade for astrophysical applications in three dimensions. The code has been developed with a focus on stellar, galactic, planetary and high energy astrophysics and has already been used widely for studies of accretion discs and turbulence, from the bir… ▽ More We present Phantom, a fast, parallel, modular and low-memory smoothed particle hydrodynamics and magnetohydrodynamics code developed over the last decade for astrophysical applications in three dimensions. The code has been developed with a focus on stellar, galactic, planetary and high energy astrophysics and has already been used widely for studies of accretion discs and turbulence, from the birth of planets to how black holes accrete. Here we describe and test the core algorithms as well as modules for magnetohydrodynamics, self-gravity, sink particles, H_2 chemistry, dust-gas mixtures, physical viscosity, external forces including numerous galactic potentials as well as implementations of Lense-Thirring precession, Poynting-Robertson drag and stochastic turbulent driving. Phantom is hereby made publicly available. △ Less

Submitted 15 June, 2018; v1 submitted 13 February, 2017; originally announced February 2017.

Comments: 88 pages, 60 figures, accepted to PASA. Code available from https://phantomsph.bitbucket.io/

On the origin of horseshoes in transitional discs

Authors: Enrico Ragusa, Giovanni Dipierro, Giuseppe Lodato, Guillaume Laibe, Daniel J. Price

Abstract: We investigate whether the rings, lopsided features and horseshoes observed at millimetre wavelengths in transitional discs can be explained by the dynamics of gas and dust at the edge of the cavity in circumbinary discs. We use 3D dusty smoothed particle hydrodynamics calculations to show that binaries with mass ratio $q \gtrsim 0.04$ drive eccentricity in the central cavity, naturally leading to… ▽ More We investigate whether the rings, lopsided features and horseshoes observed at millimetre wavelengths in transitional discs can be explained by the dynamics of gas and dust at the edge of the cavity in circumbinary discs. We use 3D dusty smoothed particle hydrodynamics calculations to show that binaries with mass ratio $q \gtrsim 0.04$ drive eccentricity in the central cavity, naturally leading to a crescent-like feature in the gas density, which is accentuated in the mm dust grain population with intensity contrasts in mm-continuum emission of 10 or higher. We perform mock observations to demonstrate that these features closely match those observed by ALMA, suggesting that the origin of rings, dust horseshoes and other non-axisymmetric structures in transition discs can be explained by the presence of massive companions. △ Less

Submitted 26 September, 2016; originally announced September 2016.

Comments: 7 pages, 3 figures, 1 table, accepted for publication in MNRAS

Suppression of the accretion rate in thin discs around binary black holes

Authors: Enrico Ragusa, Giuseppe Lodato, Daniel J. Price

Abstract: We present three-dimensional Smoothed Particle Hydrodynamics (SPH) simulations investigating the dependence of the accretion rate on the disc thickness around an equal-mass, circular black hole binary system. We find that for thick/hot discs, with $H/R\gtrsim 0.1$, the binary torque does not prevent the gas from penetrating the cavity formed in the disc by the binary (in line with previous investi… ▽ More We present three-dimensional Smoothed Particle Hydrodynamics (SPH) simulations investigating the dependence of the accretion rate on the disc thickness around an equal-mass, circular black hole binary system. We find that for thick/hot discs, with $H/R\gtrsim 0.1$, the binary torque does not prevent the gas from penetrating the cavity formed in the disc by the binary (in line with previous investigations). The situation drastically changes for thinner discs, in this case the mass accretion rate is suppressed, such that only a fraction (linearly dependent on $H/R$) of the available gas is able to flow within the cavity and accrete on to the binary. Extrapolating this result to the cold and thin accretion discs expected around supermassive black hole binary systems implies that this kind of systems accretes less material than predicted so far, with consequences not only for the electromagnetic and gravitational waves emissions during the late inspiral phase but also for the recoil speed of the black hole formed after binary coalescence, thus influencing also the evolutionary path both of the binary and of the host galaxy. Our results, being scale-free, are also applicable to equal mass, circular binaries of stellar mass black holes, such as the progenitor of the recently discovered gravitational wave source GW150914. △ Less

Submitted 5 May, 2016; originally announced May 2016.

Comments: 12 pages, 6 figures, 2 tables, accepted for publication in MNRAS