-
Silver-enriched Microdomain Patterns as Advanced Bactericidal Coatings for Polymer-based Medical Devices
Authors:
Jana Pryjmakova,
Barbora Vokata,
Miroslav Slouf,
Tomas Hubacek,
Patricia Martinez-Garcia,
Esther Rebollar,
Petr Slepicka,
Jakub Siegel
Abstract:
Today, it would be difficult for us to live a full life without polymers, especially in medicine, where its applicability is constantly expanding, giving satisfactory results without any harm effects on health. This study focused on the formation of hexagonal domains doped with AgNPs using a KrF excimer laser (λ=248 nm) on the polyetheretherketone (PEEK) surface that acts as an unfailing source of…
▽ More
Today, it would be difficult for us to live a full life without polymers, especially in medicine, where its applicability is constantly expanding, giving satisfactory results without any harm effects on health. This study focused on the formation of hexagonal domains doped with AgNPs using a KrF excimer laser (λ=248 nm) on the polyetheretherketone (PEEK) surface that acts as an unfailing source of the antibacterial agent - silver. The hexagonal structure was formed with a grid placed in front of the incident laser beam. Surfaces with immobilized silver nanoparticles (AgNPs) were observed by AFM and SEM. Changes in surface chemistry were studied by XPS. To determine the concentration of released Ag+ ions, ICP-MS analysis was used. The antibacterial tests proved the antibacterial efficacy of Ag-doped PEEK composites against Escherichia coli and Staphylococcus aureus as the most common pathogens. Because AgNPs are also known for their strong toxicity, we also included cytotoxicity tests in this study. The findings presented here contribute to the advancement of materials design in the biomedical field, offering a novel starting point for combating bacterial infections through the innovative integration of AgNPs into inert synthetic polymers.
△ Less
Submitted 28 June, 2024; v1 submitted 27 June, 2024;
originally announced June 2024.
-
Towards magnetic control of magnetite
Authors:
F. J. Pedrosa,
J. L. F. Cuñado,
P. Perna,
M. Sanz,
M. Oujja,
E. Rebollar,
J. F. Marco,
J. de la Figuera,
M. Monti,
M. Castillejo,
M. Garcia-Hernández,
F. Mompeán,
J. Camarero,
A. Bollero
Abstract:
High quality stoichiometric magnetite (Fe3O4) films grown by infrared pulsed laser deposition (IR-PLD) on different surfaces were investigated in order to study the influence of the substrate, orientation, and thickness on their magnetic behavior. Different single crystal (001)-oriented substrates, i.e., SrTiO3(001), MgAl2O4(001) and MgO(001), have been used for the preparation of epitaxial Fe3O4(…
▽ More
High quality stoichiometric magnetite (Fe3O4) films grown by infrared pulsed laser deposition (IR-PLD) on different surfaces were investigated in order to study the influence of the substrate, orientation, and thickness on their magnetic behavior. Different single crystal (001)-oriented substrates, i.e., SrTiO3(001), MgAl2O4(001) and MgO(001), have been used for the preparation of epitaxial Fe3O4(001) films. By comparison, polycrystalline magnetite films were obtained on both single crystal Al2O3(0001) and amorphous Si/SiO2 substrates. The thickness has been varied between 50 - 400 nm. All films consist of nanocrystalline stoichiometric magnetite with very small strain (<1\%) and present the Verwey transition (Tv) between 110-120 K, i.e., close to bulk magnetite (122 K). In general, Tv depends on both microstructure and thickness, increasing mainly as the thickness increases. Room temperature angular-dependent measurements reveal an in-plane fourfold symmetry magnetic behavior for all films grown on (001)-oriented surfaces, and with the easy axes lying along the Fe3O4 [010] and [100] directions. Remarkably, the fourfold magnetic symmetry shows up to 400 nm thick films. In turn, the films grown on single crystal Al2O3 (0001) and on amorphous Si/SiO2 surfaces display an isotropic magnetic behavior. Coercive field (Hc) depends on microstructure and film thickness. The largest (lowest) Hc value corresponds to the thinner film grown on a single crystal SrTiO3(001) (amorphous Si/SiO2) surface, which present the largest (lowest) strain (crystallinity). Moreover, the coercivity follows an inverse law with film thickness. Our results demonstrate that we can artificially control the magnetic behavior of stoichiometric IR-PLD grown Fe3O4 films by exploiting substrate-induced anisotropy and thickness-controlled coercivity, that might be relevant to incorporate magnetite in future spintronic devices.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Optical Properties of Bismuth Nanostructures Towards the Ultrathin Film Regime
Authors:
Johann Toudert,
Rosalia Serna,
Claire Deeb,
Esther Rebollar
Abstract:
Bulk bismuth presents outstanding optical properties, such as a giant infrared refractive index (n near 10) and a negative ultraviolet visible permittivity induced by giant interband electronic transitions. Although such properties are very appealing for applications in nanophotonics, the dielectric function of bismuth nanostructures has been scarcely studied. Here, we determine by spectroscopic e…
▽ More
Bulk bismuth presents outstanding optical properties, such as a giant infrared refractive index (n near 10) and a negative ultraviolet visible permittivity induced by giant interband electronic transitions. Although such properties are very appealing for applications in nanophotonics, the dielectric function of bismuth nanostructures has been scarcely studied. Here, we determine by spectroscopic ellipsometry the far infrared to ultraviolet dielectric function of pulsed laser deposited bismuth thin films with nominal thickness tBi varied from near 10 nm to several tens of nm. For tBi above 15 nm, the films display a continuous structure and their dielectric function is comparable with that of bulk bismuth. For tBi below 15 nm, the film structure is discontinuous, and the dielectric function differs markedly from that of bulk bismuth. It is proposed from FDTD simulations that this marked difference arises mainly from effective medium effects induced by the discontinuous film structure, where quantum electronic confinement does not play a dominant role. This suggests that ultrathin and continuous bismuth films should present the same outstanding optical properties as bulk bismuth for high performance nanophotonic devices.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Room Temperature In-plane <100> Magnetic Easy Axis for Fe3O4/SrTiO3(001):Nb Grown by Infrared PLD
Authors:
Matteo Monti,
Mikel Sanz,
Mohamed Oujja,
Esther Rebollar,
Marta Castillejo,
Marta Castillejo,
Alberto Bollero,
Julio Camarero,
Jose Luis F. Cuñado,
Norbert M. Nemes,
Federico J. Mompean,
Mar Garcia-Hernández,
Shu Nie,
Kevin F. McCarty,
Alpha T. N'Diaye,
Gong Chen,
Andreas K. Schmid,
José F. Marco,
Juan de la Figuera
Abstract:
We examine the magnetic easy-axis directions of stoichiometric magnetite films grown on SrTiO3:Nb by infrared pulsed-laser deposition. Spin-polarized low-energy electron microscopy reveals that the individual magnetic domains are magnetized along the in-plane <100> film directions. Magneto-optical Kerr effect measurements show that the maxima of the remanence and coercivity are also along in-plane…
▽ More
We examine the magnetic easy-axis directions of stoichiometric magnetite films grown on SrTiO3:Nb by infrared pulsed-laser deposition. Spin-polarized low-energy electron microscopy reveals that the individual magnetic domains are magnetized along the in-plane <100> film directions. Magneto-optical Kerr effect measurements show that the maxima of the remanence and coercivity are also along in-plane <100> film directions. This easy-axis orientation differs from bulk magnetite and films prepared by other techniques, establishing that the magnetic anisotropy can be tuned by film growth.
△ Less
Submitted 25 July, 2013;
originally announced July 2013.
