-
Resonance behavior of a compliant piezo-driven inkjet channel with an entrained microbubble
Authors:
Hans Reinten,
Yogesh Jethani,
Arjan Fraters,
Roger Jeurissen,
Detlef Lohse,
Michel Versluis,
Tim Segers
Abstract:
Microbubbles entrained in a piezo-driven drop-on-demand (DOD) printhead disturb the acoustics of the microfluidic ink channel and thereby the jetting behavior. Here, the resonance behavior of an ink channel as a function of the microbubble size and the number of bubbles is studied through theoretical modeling and experiments. The system is modeled as a set of two coupled harmonic oscillators: one…
▽ More
Microbubbles entrained in a piezo-driven drop-on-demand (DOD) printhead disturb the acoustics of the microfluidic ink channel and thereby the jetting behavior. Here, the resonance behavior of an ink channel as a function of the microbubble size and the number of bubbles is studied through theoretical modeling and experiments. The system is modeled as a set of two coupled harmonic oscillators: one corresponding to the compliant ink channel and one to the microbubble. The predicted and measured eigenfrequencies are in excellent agreement. It was found that the resonance frequency is independent of the bubble size as long as the compliance of the bubble dominates over that of the piezo actuator. An accurate description of the eigenfrequency of the coupled system requires the inclusion of the increased inertance of the entrained microbubble due to confinement. We show that the inertance of a confined bubble can be accurately obtained by using a simple potential flow approach. The model is further validated by the excellent agreement between the modeled and measured microbubble resonance curves. The present work therefore provides physical insight in the coupled dynamics of a compliant ink channel with an entrained microbubble.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Selective evaporation at the nozzle exit in piezoacoustic inkjet printing
Authors:
Maaike Rump,
Uddalok Sen,
Roger Jeurissen,
Hans Reinten,
Michel Versluis,
Detlef Lohse,
Christian Diddens,
Tim Segers
Abstract:
In practical applications of inkjet printing the nozzles in a printhead have intermittent idle periods, during which ink can evaporate from the nozzle exit. Inks are usually multicomponent where each component has its own characteristic evaporation rate resulting in concentration gradients within the ink. These gradients may directly and indirectly (via Marangoni flows) alter the jetting process a…
▽ More
In practical applications of inkjet printing the nozzles in a printhead have intermittent idle periods, during which ink can evaporate from the nozzle exit. Inks are usually multicomponent where each component has its own characteristic evaporation rate resulting in concentration gradients within the ink. These gradients may directly and indirectly (via Marangoni flows) alter the jetting process and thereby its reproducibility and the resulting print quality. In the present work, we study selective evaporation from an inkjet nozzle for water-glycerol mixtures. Through experiments, analytical modeling, and numerical simulations, we investigate changes in mixture composition with drying time. By monitoring the acoustics within the printhead, and subsequently modeling the system as a mass-spring-damper system, the composition of the mixture can be obtained as a function of drying time. The results from the analytical model are validated using numerical simulations of the full fluid mechanical equations governing the printhead flows and pressure fields. Furthermore, the numerical simulations reveal that the time independent concentration gradient we observe in the experiments is due to the steady state of water flux through the printhead. Finally, we measure the number of drop formation events required in this system before the mixture concentration within the nozzle attains the initial (pre-drying) value, and find a stronger than exponential trend in the number of drop formations required. These results shed light on the complex physiochemical hydrodynamics associated with the drying of ink at a printhead nozzle, and help in increasing the stability and reproducibility of inkjet printing.
△ Less
Submitted 27 February, 2023; v1 submitted 13 May, 2022;
originally announced May 2022.
-
Higher-order meniscus oscillations driven by flow-focusing leading to bubble pinch off and entrainment in a piezo acoustic inkjet nozzle
Authors:
Arjan Frates,
Maaike Rump,
Roger Jeurissen,
Marc van den Berg,
Youri de Loore,
Hans Reinten,
Herman Wijshoff,
Devaraj van der Meer,
Detlef Lohse,
Michel Versluis,
Tim Segers
Abstract:
The stability of high-end piezo-acoustic drop-on-demand (DOD) inkjet printing is sometimes compromised by the entrainment of an air bubble inside the ink channel. Here, bubble pinch-off from an acoustically driven meniscus is studied in an optically transparent DOD printhead as a function of the driving waveform. We show that bubble pinch-off follows from low-amplitude higher-order meniscus oscill…
▽ More
The stability of high-end piezo-acoustic drop-on-demand (DOD) inkjet printing is sometimes compromised by the entrainment of an air bubble inside the ink channel. Here, bubble pinch-off from an acoustically driven meniscus is studied in an optically transparent DOD printhead as a function of the driving waveform. We show that bubble pinch-off follows from low-amplitude higher-order meniscus oscillations on top of the global high-amplitude meniscus motion that drives droplet formation. In a certain window of control parameters, phase inversion between the low and high frequency components leads to the enclosure of an air cavity and bubble pinch-off. Although phenomenologically similar, bubble pinch-off is not a result of capillary wave interaction such as observed in drop impact on a liquid pool. Instead, we reveal geometrical flow focusing as the mechanism through which at first, an outward jet is formed on the retracted concave meniscus. When the subsequent high-frequency pressure wave hits the now toroidal-shaped meniscus, it accelerates the toroidal ring outward resulting in the formation of an air cavity that can pinch off. The critical control parameters for pinch off are the pulse timing and amplitude. To cure the bubble entrainment problem, the threshold for bubble pinch-off can be increased by suppressing the high frequency acoustic waves through appropriate waveform design. The present work therefore aids the improvement of the stability of inkjet printers through a physical understanding of meniscus instabilities.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
