Showing 1–50 of 128 results for author: Russell, S J

Retiming dynamics of harmonically modelocked laser solitons in a self-driven optomechanical lattice

Authors: Xiaocong Wang, Benhai Wang, Wenbin He, Xintong Zhang, Qi Huang, Zhiyuan Huang, Xin Jiang, Philip St. J. Russell, Meng Pang

Abstract: Harmonic mode-locking, realized actively or passively, is an effective technique for increasing the repetition rate of lasers, with important applications in optical sampling, laser micro-machining and frequency metrology. It is critically important to understand how a harmonically mode-locked pulse train responds to external perturbations and noise, so as to make sure that it is stable and resist… ▽ More Harmonic mode-locking, realized actively or passively, is an effective technique for increasing the repetition rate of lasers, with important applications in optical sampling, laser micro-machining and frequency metrology. It is critically important to understand how a harmonically mode-locked pulse train responds to external perturbations and noise, so as to make sure that it is stable and resistant to noise. Here, in a series of carefully designed experiments, we elucidate the retiming dynamics of laser pulses generated in a soliton fiber laser harmonically mode-locked at ~2 GHz to the acoustic resonance in a photonic crystal fiber (PCF) core. We characterize the self-driven optomechanical lattice along the PCF using a homodyne set-up, and reveal that each soliton undergoes damped oscillatory retiming within its trapping potential after an abrupt perturbation. In addition we show, through statistical analysis of the intra-cavity pulse spacing, how the trapping potentials are effective for suppressing timing jitter. The experimental results are well described using a dynamic model including dissipation, which provides valuable insight into the stability and noise performance of optomechanically mode-locked laser systems, and may also be useful for studying complex inter-soliton interactions. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Optomagnetic forces on YIG/YFeO3 microspheres levitated in chiral hollow-core photonic crystal fibre

Authors: Soumya Chakraborty, Gordon K. L. Wong, Ferdi Oda, Vanessa Wachter, Silvia Viola Kusminskiy, Tadahiro Yokosawa, Sabine Hübner, Benjamin Apeleo Zubiri, Erdmann Spiecker, Monica Distaso, Philip St. J. Russell, Nicolas Y. Joly

Abstract: We explore a magnetooptomechanical system consisting of a single magnetic microparticle optically levitated within the core of a helically twisted single-ring hollow-core photonic crystal fibre. We use newly-developed magnetic particles that have a core of antiferromagnetic yttrium-ortho-ferrite (YFeO3) and a shell of ferrimagnetic YIG (Y3Fe5O12) approximately 50 nm thick. Using a 632.8 nm probe b… ▽ More We explore a magnetooptomechanical system consisting of a single magnetic microparticle optically levitated within the core of a helically twisted single-ring hollow-core photonic crystal fibre. We use newly-developed magnetic particles that have a core of antiferromagnetic yttrium-ortho-ferrite (YFeO3) and a shell of ferrimagnetic YIG (Y3Fe5O12) approximately 50 nm thick. Using a 632.8 nm probe beam, we observe optical-torque-induced rotation of the particle and rotation of the magnetization vector in presence of an external static magnetic field. This one-of-a-kind platform opens a path to novel investigations of optomagnetic physics with levitated magnetic particles. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Nonwoven Reinforced Photocurable Poly(glycerol sebacate)-Based Hydrogels

Authors: Michael Phillips, Giuseppe Tronci, Christopher M. Pask, Stephen J. Russell

Abstract: Implantable hydrogels should ideally possess mechanical properties matched to the surrounding tissues to enable adequate mechanical function while regeneration occurs. This can be challenging, especially when degradable systems with high water content and hydrolysable chemical bonds are required in anatomical sites under constant mechanical stimulation, e.g. a foot ulcer cavity. In these circumsta… ▽ More Implantable hydrogels should ideally possess mechanical properties matched to the surrounding tissues to enable adequate mechanical function while regeneration occurs. This can be challenging, especially when degradable systems with high water content and hydrolysable chemical bonds are required in anatomical sites under constant mechanical stimulation, e.g. a foot ulcer cavity. In these circumstances, the design of hydrogel composites is a promising strategy to provide controlled structural features and macroscopic properties over time. To explore this strategy, the synthesis of a new photocurable elastomeric polymer, poly(glycerol-co-sebacic acid-co-lactic acid-co-polyethylene glycol) acrylate (PGSLPA), is investigated, along with its processing into UV-cured hydrogels, electrospun nonwovens and fibre-reinforced variants, without the need for a high temperature curing step or use of hazardous solvents. The mechanical properties of bioresorbable PGSLPA hydrogels were studied with and without electrospun nonwoven reinforcement and with varied layered configurations, aiming to determine the effects of microstructure on bulk compressive strength and elasticity. The nonwoven reinforced PGSLPA hydrogels exhibited a 60 % increase in compressive strength and an 80 % increase in elastic moduli compared to fibre-free PGSLPA samples. Mechanical properties of the fibre-reinforced hydrogels could also be modulated by altering the layering arrangement of the nonwoven and hydrogel phase. The nanofibre reinforced PGSLPA hydrogels also exhibited good elastic recovery, as evidenced by hysteresis in compression fatigue stress-strain evaluations showing a return to original dimensions. △ Less

Submitted 17 March, 2024; v1 submitted 13 March, 2024; originally announced March 2024.

Comments: 26 pages, 12 figures, 3 tables. Accepted in Polymers

A Generalized Acquisition Function for Preference-based Reward Learning

Authors: Evan Ellis, Gaurav R. Ghosal, Stuart J. Russell, Anca Dragan, Erdem Bıyık

Abstract: Preference-based reward learning is a popular technique for teaching robots and autonomous systems how a human user wants them to perform a task. Previous works have shown that actively synthesizing preference queries to maximize information gain about the reward function parameters improves data efficiency. The information gain criterion focuses on precisely identifying all parameters of the rewa… ▽ More Preference-based reward learning is a popular technique for teaching robots and autonomous systems how a human user wants them to perform a task. Previous works have shown that actively synthesizing preference queries to maximize information gain about the reward function parameters improves data efficiency. The information gain criterion focuses on precisely identifying all parameters of the reward function. This can potentially be wasteful as many parameters may result in the same reward, and many rewards may result in the same behavior in the downstream tasks. Instead, we show that it is possible to optimize for learning the reward function up to a behavioral equivalence class, such as inducing the same ranking over behaviors, distribution over choices, or other related definitions of what makes two rewards similar. We introduce a tractable framework that can capture such definitions of similarity. Our experiments in a synthetic environment, an assistive robotics environment with domain transfer, and a natural language processing problem with real datasets demonstrate the superior performance of our querying method over the state-of-the-art information gain method. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Frequency conversion of vortex states by chiral forward Brillouin scattering in twisted photonic crystal fibre

Authors: Xinglin Zeng, Philip St. J. Russell, Birgit Stiller

Abstract: Optical vortex states-higher optical modes with helical phase progression and carrying orbital angular momentum-have been explored to increase the flexibility and capacity of optical fibres employed for example in mode-division-multiplexing, optical trapping and multimode imaging. A common requirement in such systems is high fidelity transfer of signals between different frequency bands and modes,… ▽ More Optical vortex states-higher optical modes with helical phase progression and carrying orbital angular momentum-have been explored to increase the flexibility and capacity of optical fibres employed for example in mode-division-multiplexing, optical trapping and multimode imaging. A common requirement in such systems is high fidelity transfer of signals between different frequency bands and modes, which for vortex modes is not so straightforward. Here we report intervortex conversion between backward-propagating circularly polarised vortex modes at one wavelength, using chiral flexural phonons excited by chiral forward stimulated Brillouin scattering at a different wavelength. The experiment is carried out using chiral photonic crystal fibre, which robustly preserves circular polarisation states. The chiral acoustic wave, which has the geometry of a spinning single-spiral corkscrew, provides the orbital angular momentum necessary to conserve angular momentum between the coupled optical vortex modes. The results open up new opportunities for interband optical frequency conversion and the manipulation of vortex states in both classical and quantum regimes. △ Less

Submitted 17 January, 2024; originally announced January 2024.

Protecting quantum modes in optical fibres

Authors: M. A. T. Butt, P. Roth, G. K. L. Wong, M. H. Frosz, L. L. Sanchez-Soto, E. A. Anashkina, A. V. Andrianov, P. Banzer, P. S. J. Russell, G. Leuchs

Abstract: Polarization-preserving fibers maintain the two polarization states of an orthogonal basis. Quantum communication, however, requires sending at least two nonorthogonal states and these cannot both be preserved. We present a new scheme that allows for using polarization encoding in a fiber not only in the discrete, but also in the continuous-variable regime. For the example of a helically twisted p… ▽ More Polarization-preserving fibers maintain the two polarization states of an orthogonal basis. Quantum communication, however, requires sending at least two nonorthogonal states and these cannot both be preserved. We present a new scheme that allows for using polarization encoding in a fiber not only in the discrete, but also in the continuous-variable regime. For the example of a helically twisted photonic-crystal fibre, we experimentally demonstrate that using appropriate nonorthogonal modes, the polarization-preserving fiber does not fully scramble these modes over the full Poincaré sphere, but that the output polarization will stay on a great circle; that is, within a one-dimensional protected subspace, which can be parametrized by a single variable. This will allow for more efficient measurements of quantum excitations in nonorthogonal modes. △ Less

Submitted 18 May, 2023; originally announced May 2023.

Comments: 7 pages, 4 figures, accepted in Phys. Rev. Applied

Valleytronics in bulk MoS$_2$ by optical control of parity and time symmetries

Authors: Igor Tyulnev, Álvaro Jiménez-Galán, Julita Poborska, Lenard Vamos, Rui F. Silva, Philip St. J. Russell, Francesco Tani, Olga Smirnova, Misha Ivanov, Jens Biegert

Abstract: The valley degree of freedom of electrons in materials promises routes toward energy-efficient information storage with enticing prospects towards quantum information processing. Current challenges in utilizing valley polarization are symmetry conditions that require monolayer structures or specific material engineering, non-resonant optical control to avoid energy dissipation, and the ability to… ▽ More The valley degree of freedom of electrons in materials promises routes toward energy-efficient information storage with enticing prospects towards quantum information processing. Current challenges in utilizing valley polarization are symmetry conditions that require monolayer structures or specific material engineering, non-resonant optical control to avoid energy dissipation, and the ability to switch valley polarization at optical speed. We demonstrate all-optical and non-resonant control over valley polarization using bulk MoS$_2$, a centrosymmetric material with zero Berry curvature at the valleys. Our universal method utilizes spin-angular momentum-shaped tri-foil optical control pulses to switch the material's electronic topology to induce valley polarization by transiently breaking time and space inversion symmetry through a simple phase rotation. The dependence of the generation of the second harmonic of an optical probe pulse on the phase rotation directly demonstrates the efficacy of valley polarization. It shows that direct optical control over the valley degree of freedom is not limited to monolayer structures. Instead, it is possible for systems with an arbitrary number of layers and bulk materials. Universal and non-resonant valley control at optical speeds unlocks the possibility of engineering efficient, multi-material valleytronic devices operating on quantum coherent timescales. △ Less

Submitted 24 February, 2023; originally announced February 2023.

Comments: 4 figures

Temporal self-compression and self-frequency shift of sub-microjoule pulses at 8 MHz repetition rate

Authors: Francesco Tani, Jacob Lampen, Martin Butryn, Michael H. Frosz, Jie Jiang, Martin Fermann, Philip St. J. Russell

Abstract: We combine soliton dynamics in gas-filled hollow-core photonic crystal fibers with a state-of-the-art fiber laser to realize a turn-key system producing few-fs pulses at 8 MHz repetition rate at pump energies as low as 220 nJ. Furthermore, by exploiting the soliton self-frequency shift in a second hydrogen-filled hollow-core fiber, we efficiently generate pulses as short as 22 fs, continuously tun… ▽ More We combine soliton dynamics in gas-filled hollow-core photonic crystal fibers with a state-of-the-art fiber laser to realize a turn-key system producing few-fs pulses at 8 MHz repetition rate at pump energies as low as 220 nJ. Furthermore, by exploiting the soliton self-frequency shift in a second hydrogen-filled hollow-core fiber, we efficiently generate pulses as short as 22 fs, continuously tunable from 1100 nm to 1474 nm. △ Less

Submitted 23 July, 2022; originally announced July 2022.

High-quality 8-fold self-compression of ultrashort near-UV pulses in Ar-filled ultrathin-walled photonic crystal fiber

Authors: Jie Luan, Philip St. J. Russell, David Novoa

Abstract: We demonstrate generation of 7.6 fs near-UV pulses centered at 400 nm via 8-fold soliton-effect self-compression in an Ar-filled hollow-core kagomé-style photonic crystal fiber with ultrathin core walls. Analytical calculations of the effective compression length and soliton order permit adjustment of the experimental parameters, and numerical modelling of the nonlinear pulse dynamics in the fiber… ▽ More We demonstrate generation of 7.6 fs near-UV pulses centered at 400 nm via 8-fold soliton-effect self-compression in an Ar-filled hollow-core kagomé-style photonic crystal fiber with ultrathin core walls. Analytical calculations of the effective compression length and soliton order permit adjustment of the experimental parameters, and numerical modelling of the nonlinear pulse dynamics in the fiber accurately predict the spectro-temporal profiles of the self-compressed pulses. After compensation of phase distortion introduced by the optical elements along the beam path from the fiber to the diagnostics, 71% of the pulse energy was in the main temporal lobe, with peak powers in excess of 0.2 GW. The convenient set-up opens up new opportunities for time-resolved studies in spectroscopy, chemistry and materials science. △ Less

Submitted 31 May, 2022; originally announced May 2022.

Comments: 7 pages, 5 figures

Optical vortex Brillouin laser

Authors: Xinglin Zeng, Philip St. J. Russell, Yang Chen, Zheqi Wang, Gordon K. L. Wong, Paul Roth, Michael H. Frosz, Birgit Stiller

Abstract: Optical vortices, which have been extensively studied over the last decades, offer an additional degree of freedom useful in many applications, such as optical tweezers and quantum control. Stimulated Brillouin scattering, providing a narrow linewidth and a strong nonlinear response, has been used to realise quasi-continuous wave (CW) lasers. Here, we report stable oscillation of optical vortices… ▽ More Optical vortices, which have been extensively studied over the last decades, offer an additional degree of freedom useful in many applications, such as optical tweezers and quantum control. Stimulated Brillouin scattering, providing a narrow linewidth and a strong nonlinear response, has been used to realise quasi-continuous wave (CW) lasers. Here, we report stable oscillation of optical vortices and acoustic modes in a Brillouin laser based on chiral photonic crystal fibre, which robustly supports helical Bloch modes (HBMs) that carry circularly-polarized optical vortex and display circular birefringence. We implement a narrow-linewidth Brillouin fibre laser that stably emits 1st- and 2nd-order vortex-carrying HBMs. Angular momentum conservation selection rules dictate that pump and backward Brillouin signals have opposite topological charge and spin. Additionally, we show that when the chiral PCF is placed within a laser ring cavity, the linewidth-narrowing associated with lasing permits the peak of the Brillouin gain that corresponds to acoustic mode to be measured with resolution of 10 kHz and accuracy of 520 kHz. The results pave the way to a new generation of vortex-carrying SBS systems with applications in quantum information processing, vortex-carrying nonreciprocal systems. △ Less

Submitted 25 April, 2022; originally announced April 2022.

Nonreciprocal vortex isolator by stimulated Brillouin scattering in chiral photonic crystal fibre

Authors: Xinglin Zeng, Philip St. J. Russell, Christian Wolff, Michael H. Frosz, Gordon K. L. Wong, Birgit Stiller

Abstract: Optical non-reciprocity, which breaks the symmetry between forward and backward propagating optical waves, has become vital in photonic systems and enables many key devices, such as optical isolators, circulators and optical routers. Most conventional optical isolators involve magneto-optic materials, but devices based on optical nonlinearities, optomechanically induced transparency and stimulated… ▽ More Optical non-reciprocity, which breaks the symmetry between forward and backward propagating optical waves, has become vital in photonic systems and enables many key devices, such as optical isolators, circulators and optical routers. Most conventional optical isolators involve magneto-optic materials, but devices based on optical nonlinearities, optomechanically induced transparency and stimulated Brillouin scattering (SBS) have also been demonstrated. So far, however, they have only been implemented for linearly or randomly polarized LP01-like fundamental modes. Here we report a light-driven nonreciprocal isolator for optical vortex modes, based on topology-selective SBS in chiral photonic crystal fibre. The device can be reconfigured as an amplifier or an isolator by adjusting the frequency of the control signal. The experimental results show vortex isolation of 22 dB, which is at the state-of-the-art in fundamental mode isolators using SBS. This unique device may find applications in optical communications, fibre lasers, quantum information processing and optical tweezers. △ Less

Submitted 7 March, 2022; originally announced March 2022.

A long-lasting guided bone regeneration membrane from sequentially functionalised photoactive atelocollagen

Authors: He Liang, Jie Yin, Kenny Man, Xuebin B. Yang, Elena Calciolari, Nikolaos Donos, Stephen J. Russell, David J. Wood, Giuseppe Tronci

Abstract: The fast degradation of collagen-based membranes in the biological environment remains a critical challenge, resulting in underperforming Guided Bone Regeneration (GBR) therapy leading to compromised clinical results. Photoactive atelocollagen (AC) systems functionalised with ethylenically unsaturated monomers, such as 4-vinylbenzyl chloride (4VBC), have been shown to generate mechanically compete… ▽ More The fast degradation of collagen-based membranes in the biological environment remains a critical challenge, resulting in underperforming Guided Bone Regeneration (GBR) therapy leading to compromised clinical results. Photoactive atelocollagen (AC) systems functionalised with ethylenically unsaturated monomers, such as 4-vinylbenzyl chloride (4VBC), have been shown to generate mechanically competent materials for wound healing, inflammation control and drug delivery, whereby control of the molecular architecture of the AC network is key. Building on this platform, the sequential functionalisation with 4VBC and methacrylic anhydride (MA) was hypothesised to generate UV-cured AC hydrogels with reduced swelling ratio, increased proteolytic stability and barrier functionality for GBR therapy. The sequentially functionalised atelocollagen precursor (SAP) was characterised via TNBS and ninhydrin colourimetric assays, circular dichroism and UV-curing rheometry, which confirmed nearly complete consumption of collagen primary amino groups, preserved triple helices and fast (within 180 s) gelation kinetics, respectively. Hydrogel swelling ratio and compression modulus were adjusted depending on the aqueous environment used for UV-curing, whilst the sequential functionalisation of AC successfully generated hydrogels with superior proteolytic stability in vitro compared to both 4VBC functionalised control and the commercial dental membrane Bio-Gide. These in vitro results were confirmed in vivo via both subcutaneous implantation and a proof-of-concept study in a GBR calvarial model, indicating integrity of the hydrogel and barrier defect, as well as tissue formation following 1-month implantation in rats. △ Less

Submitted 15 December, 2021; originally announced December 2021.

Comments: 11 figures, 2 tables, accepted on Acta Biomaterialia

Stimulated Brillouin scattering in chiral photonic crystal fiber

Authors: Xinglin Zeng, Wenbin He, Micahel H. Frosz, Andreas Geilen, Paul Roth, Gordon K. L. Wong, Philip St. J. Russell, Birgit Stiller

Abstract: Stimulated Brillouin scattering (SBS) has many applications, for example, in sensing, microwave photonics and signal processing. Here we report the first experimental study of SBS in chiral photonic crystal fiber (PCF), which displays optical activity and robustly maintains circular polarization states against external perturbations. As a result, circularly polarized pump light is cleanly back-sca… ▽ More Stimulated Brillouin scattering (SBS) has many applications, for example, in sensing, microwave photonics and signal processing. Here we report the first experimental study of SBS in chiral photonic crystal fiber (PCF), which displays optical activity and robustly maintains circular polarization states against external perturbations. As a result, circularly polarized pump light is cleanly back-scattered into a Stokes signal with the orthogonal circular polarization state, as is required by angular momentum conservation. By comparison, untwisted PCF generates a Stokes signal with an unpredictable polarization state, owing to its high sensitivity to external perturbations. We use chiral PCF to realize a circularly polarized continuous-wave Brillouin laser. The results pave the way to a new generation of stable circularly polarized SBS systems with applications in quantum manipulation, optical tweezers, optical gyroscopes and fiber sensors. △ Less

Submitted 9 November, 2021; originally announced November 2021.

Journal ref: Photonics Research Vol. 10, Issue 3, pp. 711-718 (2022)

Deep-UV-enhanced supercontinuum generated in tapered gas-filled photonic crystal fiber

Authors: Mallika Irene Suresh, Jonas Hammer, Nicolas Y. Joly, Philip St. J. Russell, Francesco Tani

Abstract: We present the use of linearly down-tapered gas-filled hollow-core photonic crystal fiber in a single-stage, pumped with pulses from a compact infrared laser source, to generate a supercontinuum carrying significant spectral power in the deep ultraviolet (200 - 300 nm). The generated supercontinuum extends from the near infrared down to around 213 nm with up to 0.83 mW/nm in the deep ultraviolet. We present the use of linearly down-tapered gas-filled hollow-core photonic crystal fiber in a single-stage, pumped with pulses from a compact infrared laser source, to generate a supercontinuum carrying significant spectral power in the deep ultraviolet (200 - 300 nm). The generated supercontinuum extends from the near infrared down to around 213 nm with up to 0.83 mW/nm in the deep ultraviolet. △ Less

Submitted 9 July, 2021; originally announced July 2021.

Comments: 4 pages (+1 page for full reference list), 3 figures

Position Measurement of Multiple Microparticles in Hollow-Core Photonic Crystal Fiber by Coherent Optical Frequency Domain Reflectometry

Authors: Jasper Podschus, Max Koeppel, Bernhard Schmauss, Abhinav Sharma, Sanju Sundaramahalingam, Shangran Xie, Philip St. J. Russell

Abstract: Flying particle sensors in hollow-core photonic crystal fibers require accurate localization of the optically trapped microparticles. We report position measurement to micrometer-resolution, using optical frequency domain reflectometry, of two 1.65-$μ$m-diameter polystyrene particles. Flying particle sensors in hollow-core photonic crystal fibers require accurate localization of the optically trapped microparticles. We report position measurement to micrometer-resolution, using optical frequency domain reflectometry, of two 1.65-$μ$m-diameter polystyrene particles. △ Less

Submitted 23 March, 2021; originally announced March 2021.

Comments: 4 pages, 3 figures, Accepted for presentation at the 27th International Conference on Optical Fibre Sensors (OFS) 2020, Alexandria, Virginia, USA

Efficient self-compression of ultrashort UV pulses in air-filled hollow-core photonic crystal fiber

Authors: Jie Luan, Philip St. J. Russell, David Novoa

Abstract: We report generation of ultrashort UV pulses by soliton self-compression in kagomé-style hollow-core photonic crystal fiber filled with ambient air. Pump pulses with energy 2.6 uJ and duration 54 fs at 400 nm were compressed temporally by a factor of 5, to a duration of ~11 fs. The experimental results are supported by numerical simulations, showing that both Raman and Kerr effects play a role in… ▽ More We report generation of ultrashort UV pulses by soliton self-compression in kagomé-style hollow-core photonic crystal fiber filled with ambient air. Pump pulses with energy 2.6 uJ and duration 54 fs at 400 nm were compressed temporally by a factor of 5, to a duration of ~11 fs. The experimental results are supported by numerical simulations, showing that both Raman and Kerr effects play a role in the compression dynamics. The convenience of using ambient air, and the absence of glass windows that would distort the compressed pulses, makes the setup highly attractive as the basis of an efficient table-top UV pulse compressor. △ Less

Submitted 22 February, 2021; originally announced February 2021.

Comments: 7 pages, 5 figures

Induced Periosteum-Mimicking Membrane with Cell Barrier and Multipotential Stromal Cell (MSC) Homing Functionalities

Authors: Heather E. Owston, Katrina M. Moisley, Giuseppe Tronci, Stephen J. Russell, Peter V. Giannoudis, Elena Jones

Abstract: The current management of critical size bone defects (CSBDs) remains challenging and requires multiple surgeries. To reduce the number of surgeries, wrapping a biodegradable fibrous membrane around the defect to contain the graft and carry biological stimulants for repair is highly desirable. Poly(epsilon-caprolactone) (PCL) can be utilised to realise nonwoven fibrous barrier-like structures throu… ▽ More The current management of critical size bone defects (CSBDs) remains challenging and requires multiple surgeries. To reduce the number of surgeries, wrapping a biodegradable fibrous membrane around the defect to contain the graft and carry biological stimulants for repair is highly desirable. Poly(epsilon-caprolactone) (PCL) can be utilised to realise nonwoven fibrous barrier-like structures through free surface electrospinning (FSE). Human periosteum and induced membrane (IM) samples informed the development of an FSE membrane to support platelet lysate (PL) absorption, multipotential stromal cells (MSC) growth, and the prevention of cell migration. Although thinner than IM, periosteum presented a more mature vascular system with a significantly larger blood vessel diameter. The electrospun membrane (PCL3%-E) exhibited randomly configured nanoscale fibres that were successfully customised to introduce pores of increased diameter, without compromising tensile properties. Additional to the PL absorption and release capabilities needed for MSC attraction and growth, PCL3%-E also provided a favourable surface for the proliferation and alignment of periosteum- and bone marrow derived-MSCs, whilst possessing a barrier function to cell migration. These results demonstrate the development of a promising biodegradable barrier membrane enabling PL release and MSC colonisation, two key functionalities needed for the in situ formation of a transitional periosteum-like structure, enabling movement towards single-surgery CSBD reconstruction. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Biomimetic peptide enriched nonwoven scaffolds promote calcium phosphate mineralisation

Authors: Robabeh Gharaei, Giuseppe Tronci, Parikshit Goswami, Robert P. Wynn Davies, Jennifer Kirkham, Stephen J. Russell

Abstract: Cell-free translational strategies are needed to accelerate the repair of mineralised tissues, particularly large bone defects, using minimally invasive approaches. Regenerative bone scaffolds should ideally mimic aspects of the tissue's ECM over multiple length scales and enable surgical handling and fixation during implantation in vivo. Leveraging the knowledge gained with bioactive self-assembl… ▽ More Cell-free translational strategies are needed to accelerate the repair of mineralised tissues, particularly large bone defects, using minimally invasive approaches. Regenerative bone scaffolds should ideally mimic aspects of the tissue's ECM over multiple length scales and enable surgical handling and fixation during implantation in vivo. Leveraging the knowledge gained with bioactive self-assembling peptides (SAPs) and SAP-enriched electrospun fibres, we presented a cell free approach for promoting mineralisation via apatite deposition and crystal growth, in vitro, of SAP-enriched nonwoven scaffolds. The nonwoven scaffold was made by electrospinning poly(epsilon-caprolactone) (PCL) in the presence of either peptide P11-4 (Ac-QQRFEWEFEQQ-Am) or P11-8 (Ac-QQRFOWOFEQQ-Am), in light of the polymer's fibre forming capability and its hydrolytic degradability as well as the well-known apatite nucleating capability of SAPs. The 11-residue family of peptides (P11-X) has the ability to self-assemble into beta-sheet ordered structures at the nano-scale and to generate hydrogels at the macroscopic scale, some of which are capable of promoting biomineralisation due to their apatite-nucleating capability. Both variants of SAP-enriched nonwoven used in this study were proven to be biocompatible with murine fibroblasts and supported nucleation and growth of apatite minerals in simulated body fluid (SBF) in vitro. The fibrous nonwoven provided a structurally robust scaffold, with the capability to control SAP release behaviour. Up to 75% of P11-4 and 45% of P11-8 were retained in the fibres after 7-day incubation in aqueous solution at pH 7.4. The encapsulation of SAP in a nonwoven system with apatite-forming as well as localised and long-term SAP delivery capabilities is appealing as a potential means of achieving cost-effective bone repair therapy for critical size defects. △ Less

Submitted 5 January, 2021; originally announced January 2021.

In-situ crosslinked wet spun collagen triple helices with nanoscale-regulated ciprofloxacin release capability

Authors: M. Tarik Arafat, Giuseppe Tronci, David J. Wood, Stephen J. Russell

Abstract: The design of antibacterial-releasing coatings or wrapping materials with controlled drug release capability is a promising strategy to minimise risks of infection and medical device failure in vivo. Collagen fibres have been employed as medical device building block, although they still fail to display controlled release capability, competitive wet-state mechanical properties, and retained triple… ▽ More The design of antibacterial-releasing coatings or wrapping materials with controlled drug release capability is a promising strategy to minimise risks of infection and medical device failure in vivo. Collagen fibres have been employed as medical device building block, although they still fail to display controlled release capability, competitive wet-state mechanical properties, and retained triple helix organisation. We investigated this challenge by pursuing a multiscale design approach integrating drug encapsulation, in-situ covalent crosslinking and fibre spinning. By selecting ciprofloxacin (Cip) as a typical antibacterial drug, wet spinning was selected as a triple helix-friendly route towards Cip-encapsulated collagen fibres; whilst in situ crosslinking of fibre-forming triple helices with 1,3 phenylenediacetic acid (Ph) was hypothesised to yield Ph-Cip π-π stacking aromatic interactions and enable controlled drug release. Higher tensile modulus and strength were measured in Ph crosslinked fibres compared to state-of-the-art carbodiimide crosslinked controls. Cip-encapsulated Ph-crosslinked fibres revealed decreased elongation at break and significantly-enhanced drug retention in vitro with respect to Cip-free variants and carbodiimide-crosslinked controls, respectively. This multiscale manufacturing strategy provides new insight aiming at wet spun collagen triple helices with nanoscale-regulated tensile properties and drug release capability. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Frenet-Serret analysis of helical Bloch modes in N-fold rotationally symmetric rings of coupled spiralling optical waveguides

Authors: Yang Chen, Philip St. J. Russell

Abstract: The behavior of electromagnetic waves in chirally twisted structures is a topic of enduring interest, dating back at least to the invention in the 1940s of the microwave travelling wave tube amplifier and culminating in contemporary studies of chiral metamaterials, metasurfaces, and photonic crystal fibers (PCFs). Optical fibers with chiral microstructures, drawn from a spinning preform, have many… ▽ More The behavior of electromagnetic waves in chirally twisted structures is a topic of enduring interest, dating back at least to the invention in the 1940s of the microwave travelling wave tube amplifier and culminating in contemporary studies of chiral metamaterials, metasurfaces, and photonic crystal fibers (PCFs). Optical fibers with chiral microstructures, drawn from a spinning preform, have many useful properties, exhibiting for example circular birefringence and circular dichroism. It has recently been shown that chiral fibers with N fold rotationally symmetric (symmetry group CN) transverse microstructures support families of helical Bloch modes (HBMs), each of which consists of a superposition of azimuthal Bloch harmonics (or optical vortices). An example is a fiber with N coupled cores arranged in a ring around its central axis (N core single ring fiber). Although this type of fiber can be readily modelled using scalar coupled mode theory, a full description of its optical properties requires a vectorial analysis that takes account of the polarization state of the light particularly important in studies of circular and vortical birefringence. In this paper we develop, using an orthogonal two dimensional helicoidal coordinate system embedded in a cylindrical surface at constant radius, a rigorous vector coupled mode description of the fields using local Frenet Serret frames that rotate and twist with each of the N cores. The analysis places on a firm theoretical footing a previous HBM theory in which a heuristic approach was taken, based on physical intuition of the properties of Bloch waves. We believe this study provides clarity in what can sometimes be a rather difficult field, and will facilitate further exploration of real-world applications of these fascinating waveguiding systems. △ Less

Submitted 6 November, 2020; originally announced November 2020.

Comments: 20 pages, 10 figures

High-brightness seven-octave carrier envelope phase-stable light source

Authors: Ugaitz Elu, Luke Maidment, Lenard Vamos, Francesco Tani, David Novoa, Michael H. Frosz, Valeriy Badikov, Dmitrii Badikov, Valentin Petrov, Philip St. J. Russell, Jens Biegert

Abstract: High-brightness sources of coherent and few-cycle-duration light waveforms with spectral coverage from the UV to the THz would offer unprecedented versatility and opportunities for a spectacular range of applications from bio-chemical sensing, to time-resolved and nonlinear spectroscopy, to attosecond light-wave electronics. Combinations of various sources with frequency conversion and supercontin… ▽ More High-brightness sources of coherent and few-cycle-duration light waveforms with spectral coverage from the UV to the THz would offer unprecedented versatility and opportunities for a spectacular range of applications from bio-chemical sensing, to time-resolved and nonlinear spectroscopy, to attosecond light-wave electronics. Combinations of various sources with frequency conversion and supercontinuum generation can provide relatively large spectral coverage, but many applications require much broader spectral range and low-jitter synchronization for time-domain measurements. Here, we present a carrier-envelope-phase stable light source, seeded by a mid-IR frequency comb, with simultaneous spectral coverage across 7 optical octaves, from the UV (340 nm) into the THz (40,000 nm). Combining soliton self-compression and dispersive wave generation in an anti-resonant-reflection photonic crystal fibre with intra-pulse difference frequency generation in BaGa2GeSe6, the spectral brightness is 2-5 orders of magnitude above synchrotron sources. This enables high-dynamic-range spectroscopies and provides enticing prospects for attosecond physics and material sciences. △ Less

Submitted 2 November, 2020; originally announced November 2020.

Comments: 4 figures

Covariance spectroscopy of molecular gases using fs pulse bursts created by modulational instability in gas-filled hollow-core fiber

Authors: Mallika Irene Suresh, Philip St. J. Russell, Francesco Tani

Abstract: We present a technique that uses noisy broadband pulse bursts generated by modulational instability to probe nonlinear processes, including infrared-inactive Raman transitions, in molecular gases. These processes imprint correlations between different regions of the noisy spectrum, which can be detected by acquiring single shot spectra and calculating the Pearson correlation coefficient between th… ▽ More We present a technique that uses noisy broadband pulse bursts generated by modulational instability to probe nonlinear processes, including infrared-inactive Raman transitions, in molecular gases. These processes imprint correlations between different regions of the noisy spectrum, which can be detected by acquiring single shot spectra and calculating the Pearson correlation coefficient between the different frequency components. Numerical simulations verify the experimental measurements and are used to further understand the system and discuss methods to improve the signal strength and the spectral resolution of the technique. △ Less

Submitted 14 December, 2020; v1 submitted 16 October, 2020; originally announced October 2020.

Comments: 12 pages, 4 figures

Generation of sub-40 fs pulses at 1.8 μm by chirp-assisted Raman scattering in hydrogen-filled hollow-core fibre

Authors: Sébastien Loranger, Philip St. J. Russell, David Novoa

Abstract: The possibility of performing time-resolved spectroscopic studies in the molecular fingerprinting region or extending the cut-off wavelength of high-harmonic generation has recently boosted the development of efficient mid-infrared ultrafast lasers. In particular, fibre lasers based on active media such as thulium or holmium are a very active area of research since they are robust, compact and can… ▽ More The possibility of performing time-resolved spectroscopic studies in the molecular fingerprinting region or extending the cut-off wavelength of high-harmonic generation has recently boosted the development of efficient mid-infrared ultrafast lasers. In particular, fibre lasers based on active media such as thulium or holmium are a very active area of research since they are robust, compact and can operate at high repetition rates. These systems, however, are still complex, are unable to deliver pulses shorter than 100 fs and are not yet as mature as their near-infrared counterparts. Here we report generation of sub-40 fs pulses at 1.8 microns, with quantum efficiencies of 50% and without need for post-compression, in hydrogen-filled hollow-core photonic crystal fibre pumped by a commercial 300-fs fibre laser at 1030 nm. This is achieved by pressure-tuning the dispersion and avoiding Raman gain suppression by adjusting the chirp of the pump pulses and the proportion of higher order modes launched into the fibre. The system is optimized using a physical model that incorporates the main linear and nonlinear contributions to the optical response. The approach is average power-scalable, permits adjustment of the pulse shape and can potentially allow access to much longer wavelengths. △ Less

Submitted 30 June, 2020; originally announced June 2020.

Comments: 9 pages, 10 figures

Journal ref: J. Opt. Soc. Am. B 37, 3550 (2020)

Spatio-temporal measurement of ionization-induced modal index changes in gas-filled PCF by prism-assisted side-coupling

Authors: Barbara M. Trabold, Mallika I. Suresh, Johannes R. Koehler, Michael H. Frosz, Francesco Tani, Philip St. J. Russell

Abstract: We report the use of prism-assisted side-coupling to investigate the spatio-temporal dynamics of photoionization in an Ar-filled hollow-core photonic crystal fiber. By launching four different LP core modes we are able to probe temporal and spatial changes in the modal refractive index on timescales from a few hundred picoseconds to several hundred microseconds after the ionization event. We exper… ▽ More We report the use of prism-assisted side-coupling to investigate the spatio-temporal dynamics of photoionization in an Ar-filled hollow-core photonic crystal fiber. By launching four different LP core modes we are able to probe temporal and spatial changes in the modal refractive index on timescales from a few hundred picoseconds to several hundred microseconds after the ionization event. We experimentally analyze the underlying gas density waves and find good agreement with quantitative and qualitative hydrodynamic predictions. Moreover, we observe periodic modulations in the MHz-range lasting for a few microseconds, indicating nanometer-scale vibrations of the fiber structure, driven by gas density waves. △ Less

Submitted 12 June, 2020; originally announced June 2020.

Comments: 8 pages, 4 figures, peer-reviewed and published

Journal ref: Optics Express 27, 14392-14399 (2019)

Pump-probe study of plasma dynamics in gas-filled photonic crystal fiber using counter-propagating solitons

Authors: Mallika I. Suresh, Felix Köttig, Johannes R. Koehler, Francesco Tani, Philip St. J. Russell

Abstract: We present a pump-probe technique for monitoring ultrafast polarizability changes. In particular, we use it to measure the plasma density created at the temporal focus of a self-compressing higher-order pump soliton in gas-filled hollow-core photonic crystal fiber. This is done by monitoring the wavelength of the dispersive wave emission from a counter-propagating probe soliton. By varying the rel… ▽ More We present a pump-probe technique for monitoring ultrafast polarizability changes. In particular, we use it to measure the plasma density created at the temporal focus of a self-compressing higher-order pump soliton in gas-filled hollow-core photonic crystal fiber. This is done by monitoring the wavelength of the dispersive wave emission from a counter-propagating probe soliton. By varying the relative delay between pump and probe, the plasma density distribution along the fiber can be mapped out. Compared to the recently introduced interferometric side-probing for monitoring the plasma density, our new technique is relatively immune to instabilities caused by air turbulence and mechanical vibration. The results of two experiments on argon- and krypton-filled fiber are presented, and compared to numerical simulations. The technique provides an important new tool for probing photoionization in many different gases and gas mixtures as well as ultrafast changes in dispersion in many other contexts. △ Less

Submitted 12 June, 2020; originally announced June 2020.

Comments: 7 pages, 3 figures, peer-reviewed and published

Journal ref: Physical Review Applied 12, 064015 (2019)

Narrowband vacuum ultraviolet light via cooperative Raman scattering in dual-pumped gas-filled photonic crystal fiber

Authors: Rinat Tyumenev, Philip St. J. Russell, David Novoa

Abstract: Many fields such as bio-spectroscopy and photochemistry often require sources of vacuum ultraviolet (VUV) pulses featuring a narrow linewidth and tunable over a wide frequency range. However, the majority of available VUV light sources do not simultaneously fulfill those two requirements, and few if any are truly compact, cost-effective and easy to use by non-specialists. Here we introduce a novel… ▽ More Many fields such as bio-spectroscopy and photochemistry often require sources of vacuum ultraviolet (VUV) pulses featuring a narrow linewidth and tunable over a wide frequency range. However, the majority of available VUV light sources do not simultaneously fulfill those two requirements, and few if any are truly compact, cost-effective and easy to use by non-specialists. Here we introduce a novel approach that goes a long way to meeting this challenge. It is based on hydrogen-filled hollow-core photonic crystal fiber pumped simultaneously by two spectrally distant pulses. Stimulated Raman scattering enables the generation of coherence waves of collective molecular motion in the gas, which together with careful dispersion engineering and control over the modal content of the pump light, facilitates cooperation between the two separate Raman combs, resulting in a spectrum that reaches deep into the VUV. Using this system, we demonstrate the generation of a dual Raman comb of narrowband lines extending down to 141 nm using only 100 mW of input power delivered by a commercial solid-state laser. The approach may enable access to tunable VUV light to any laboratory and therefore boost progress in many research areas across multiple disciplines. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: 4 pages, 4 figures

Modulational-instability-free pulse compression in anti-resonant hollow-core photonic crystal fiber

Authors: F. Köttig, F. Tani, P. St. J. Russell

Abstract: Gas-filled hollow-core photonic crystal fiber (PCF) is used for efficient nonlinear temporal compression of femtosecond laser pulses, two main schemes being direct soliton-effect self-compression, and spectral broadening followed by phase compensation. To obtain stable compressed pulses, it is crucial to avoid decoherence through modulational instability (MI) during spectral broadening. Here we sh… ▽ More Gas-filled hollow-core photonic crystal fiber (PCF) is used for efficient nonlinear temporal compression of femtosecond laser pulses, two main schemes being direct soliton-effect self-compression, and spectral broadening followed by phase compensation. To obtain stable compressed pulses, it is crucial to avoid decoherence through modulational instability (MI) during spectral broadening. Here we show that changes in dispersion due to spectral anti-crossings between the fundamental core mode and core wall resonances in anti-resonant-guiding hollow-core PCF can strongly alter the MI gain spectrum, enabling MI-free pulse compression for optimized fiber designs. In addition, higher-order dispersion can introduce MI even when the pump pulses lie in the normal dispersion region. △ Less

Submitted 30 April, 2020; originally announced May 2020.

Journal ref: Opt. Lett. 45, 4044 (2020)

Massively parallel optical-soliton reactors

Authors: Wenbin He, Meng Pang, Dung-Han Yeh, Jiapeng Huang, Philip St. J. Russell

Abstract: Mode-locked lasers have been widely used to explore interactions between optical solitons, including bound-soliton states that may be regarded as "photonic molecules". Conventional mode-locked lasers can however host at most only a few solitons, which means that stochastic behaviour involving large numbers of solitons cannot easily be studied under controlled experimental conditions. Here we repor… ▽ More Mode-locked lasers have been widely used to explore interactions between optical solitons, including bound-soliton states that may be regarded as "photonic molecules". Conventional mode-locked lasers can however host at most only a few solitons, which means that stochastic behaviour involving large numbers of solitons cannot easily be studied under controlled experimental conditions. Here we report the use of an optoacoustically mode-locked fibre laser to create hundreds of temporal traps or "reactors" within which multiple solitons can be isolated and controlled both globally and individually. We achieve on-demand synthesis and dissociation of soliton molecules within these parallel reactors, in this way unfolding a novel panorama of diverse dynamics in which the statistics of multi-soliton interactions can be studied. The results are of potential importance in all-optical information processing and in the control of ultrafast pulsed lasers. △ Less

Submitted 23 April, 2020; originally announced April 2020.

Comments: 14 pages, 6 figures in main article, 28 pages, 21 figures in supplementary text

Robust excitation and Raman conversion of guided vortices in chiral gas-filled photonic crystal fiber

Authors: S. Davtyan, Y. Chen, M. H. Frosz, P. ST. J. Russell, D. Novoa

Abstract: The unique ring-shaped intensity patterns and helical phase fronts of optical vortices make them useful in many applications. Here we report for the first time efficient Raman frequency conversion between vortex modes in twisted hydrogen-filled single-ring hollow core photonic crystal fiber (SR-PCF). High fidelity transmission of optical vortices in untwisted SR-PCF becomes more and more difficult… ▽ More The unique ring-shaped intensity patterns and helical phase fronts of optical vortices make them useful in many applications. Here we report for the first time efficient Raman frequency conversion between vortex modes in twisted hydrogen-filled single-ring hollow core photonic crystal fiber (SR-PCF). High fidelity transmission of optical vortices in untwisted SR-PCF becomes more and more difficult as the orbital angular momentum (OAM) order increases, due to scattering at structural imperfections in the fiber microstructure. In helically twisted SR-PCF, however, the degeneracy between left- and right-handed versions of the same mode is lifted, with the result that they are topologically protected from such scattering. With launch efficiencies of ~75%, a high damage threshold and broadband guidance, these fibers are ideal for performing nonlinear experiments that require the polarization state and azimuthal order of the interacting modes to be preserved over long distances. Vortex coherence waves (VCW) of internal molecular motion, carrying angular momentum, are excited in the gas, permitting the polarization and orbital angular momentum of the Raman bands to be tailored, even in spectral regions where conventional solid-core waveguides are opaque or susceptible to optical damage. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Efficient single-cycle pulse compression of an ytterbium fiber laser at 10 MHz repetition rate

Authors: F. Köttig, D. Schade, J. R. Koehler, P. St. J. Russell, F. Tani

Abstract: Over the past years, ultrafast lasers with average powers in the 100 W range have become a mature technology, with a multitude of applications in science and technology. Nonlinear temporal compression of these lasers to few- or even single-cycle duration is often essential, yet still hard to achieve, in particular at high repetition rates. Here we report a two-stage system for compressing pulses f… ▽ More Over the past years, ultrafast lasers with average powers in the 100 W range have become a mature technology, with a multitude of applications in science and technology. Nonlinear temporal compression of these lasers to few- or even single-cycle duration is often essential, yet still hard to achieve, in particular at high repetition rates. Here we report a two-stage system for compressing pulses from a 1030 nm ytterbium fiber laser to single-cycle durations with 5 $μ$J output pulse energy at 9.6 MHz repetition rate. In the first stage, the laser pulses are compressed from 340 to 25 fs by spectral broadening in a krypton-filled single-ring photonic crystal fiber (SR-PCF), subsequent phase compensation being achieved with chirped mirrors. In the second stage, the pulses are further compressed to single-cycle duration by soliton-effect self-compression in a neon-filled SR-PCF. We estimate a pulse duration of ~3.4 fs at the fiber output by numerically back-propagating the measured pulses. Finally, we directly measured a pulse duration of 3.8 fs (1.25 optical cycles) after compensating (using chirped mirrors) the dispersion introduced by the optical elements after the fiber, more than 50% of the total pulse energy being in the main peak. The system can produce compressed pulses with peak powers >0.6 GW and a total transmission exceeding 70%. △ Less

Submitted 23 January, 2020; originally announced January 2020.

Journal ref: Opt. Express 28, 9099 (2020)

Highly Efficient Deep UV Generation by Four-Wave Mixing in Gas-Filled Hollow Core Photonic Crystal Fiber

Authors: Federico Belli, Amir Abdolvand, John C. Travers, Philip St. J. Russell

Abstract: We report on a highly-efficient experimental scheme for the generation of deep-ultraviolet ultrashort light pulses using four-wave mixing in gas-filled kagomé-style photonic crystal fiber. By pumping with ultrashort, few $μ$J, pulses centered at 400 nm, we generate an idler pulse at 266 nm, and amplify a seeded signal at 800 nm. We achieve remarkably high pump-to-idler energy conversion efficienci… ▽ More We report on a highly-efficient experimental scheme for the generation of deep-ultraviolet ultrashort light pulses using four-wave mixing in gas-filled kagomé-style photonic crystal fiber. By pumping with ultrashort, few $μ$J, pulses centered at 400 nm, we generate an idler pulse at 266 nm, and amplify a seeded signal at 800 nm. We achieve remarkably high pump-to-idler energy conversion efficiencies of up to 38%. Although the pump and seed pulse durations are ~100 fs, the generated ultraviolet spectral bandwidths support sub-15 fs pulses. These can be further extended to support few-cycle pulses. Four-wave mixing in gas-filled hollow-core fibres can be scaled to high average powers and different spectral regions such as the vacuum ultraviolet (100-200 nm). △ Less

Submitted 25 July, 2019; originally announced July 2019.

Comments: 4 pages, 5 figures

Journal ref: Optics Letters 44, pp. 5509-5512 (2019)

On-the-fly particle metrology in hollow-core photonic crystal fibre

Authors: Abhinav Sharma, Shangran Xie, Richard Zeltner, Philip St. J. Russell

Abstract: Efficient monitoring of airborne particulate matter (PM), especially particles with aerodynamic diameter less than 2.5 um (PM2.5), is crucial for improving public health. Reliable information on the concentration, size distribution and chemical characteristics of PMs is key to evaluating air pollution and identifying its sources. Standard methods for PM2.5 characterization require sample collectio… ▽ More Efficient monitoring of airborne particulate matter (PM), especially particles with aerodynamic diameter less than 2.5 um (PM2.5), is crucial for improving public health. Reliable information on the concentration, size distribution and chemical characteristics of PMs is key to evaluating air pollution and identifying its sources. Standard methods for PM2.5 characterization require sample collection from the atmosphere and post-analysis using sophisticated equipment in a laboratory environment, and are normally very time-consuming. Although optical methods based on analysis of scattering of free-space laser beams or evanescent fields are in principle suitable for real-time particle counting and sizing, lack of knowledge of the refractive index in these methods not only leads to inevitable sizing ambiguity but also prevents identification of the particle material. In the case of evanescent wave detection, the system lifetime is strongly limited by adhesion of particles to the surfaces. Here we report a novel technique for airborne particle metrology based on hollow-core photonic crystal fibre. It offers in situ particle counting, sizing and refractive index measurement with effectively unlimited device lifetime, and relies on optical forces that automatically capture airborne particles in front of the hollow core and propel them into the fibre. The resulting transmission drop, together with the time-of-flight of the particles passing through the fibre, provide unambiguous mapping of particle size and refractive index with high accuracy. The technique represents a considerable advance over currently available real-time particle metrology systems, and can be directly applied to monitoring air pollution in the open atmosphere as well as precise particle characterization in a local environment such as a closed room or a reaction vessel. △ Less

Submitted 21 July, 2019; originally announced July 2019.

Cognitive Model Priors for Predicting Human Decisions

Authors: David D. Bourgin, Joshua C. Peterson, Daniel Reichman, Thomas L. Griffiths, Stuart J. Russell

Abstract: Human decision-making underlies all economic behavior. For the past four decades, human decision-making under uncertainty has continued to be explained by theoretical models based on prospect theory, a framework that was awarded the Nobel Prize in Economic Sciences. However, theoretical models of this kind have developed slowly, and robust, high-precision predictive models of human decisions remai… ▽ More Human decision-making underlies all economic behavior. For the past four decades, human decision-making under uncertainty has continued to be explained by theoretical models based on prospect theory, a framework that was awarded the Nobel Prize in Economic Sciences. However, theoretical models of this kind have developed slowly, and robust, high-precision predictive models of human decisions remain a challenge. While machine learning is a natural candidate for solving these problems, it is currently unclear to what extent it can improve predictions obtained by current theories. We argue that this is mainly due to data scarcity, since noisy human behavior requires massive sample sizes to be accurately captured by off-the-shelf machine learning methods. To solve this problem, what is needed are machine learning models with appropriate inductive biases for capturing human behavior, and larger datasets. We offer two contributions towards this end: first, we construct "cognitive model priors" by pretraining neural networks with synthetic data generated by cognitive models (i.e., theoretical models developed by cognitive psychologists). We find that fine-tuning these networks on small datasets of real human decisions results in unprecedented state-of-the-art improvements on two benchmark datasets. Second, we present the first large-scale dataset for human decision-making, containing over 240,000 human judgments across over 13,000 decision problems. This dataset reveals the circumstances where cognitive model priors are useful, and provides a new standard for benchmarking prediction of human decisions under uncertainty. △ Less

Submitted 22 May, 2019; originally announced May 2019.

Comments: ICML 2019

Journal ref: Proceedings of the 36th International Conference on Machine Learning, PMLR 97:5133-5141, 2019

Polarization-Tailored Raman Frequency Conversion in Chiral Gas-Filled Hollow Core Photonic Crystal Fibers

Authors: S. Davtyan, D. Novoa, Y. Chen, M. H. Frosz, P. St. J. Russell

Abstract: Broadband-tunable sources of circularly-polarized light are crucial in fields such as laser science, biomedicine and spectroscopy. Conventional sources rely on nonlinear wavelength conversion and polarization control using standard optical components, and are limited by the availability of suitably transparent crystals and glasses. Although gas-filled hollow-core photonic crystal fiber provides pr… ▽ More Broadband-tunable sources of circularly-polarized light are crucial in fields such as laser science, biomedicine and spectroscopy. Conventional sources rely on nonlinear wavelength conversion and polarization control using standard optical components, and are limited by the availability of suitably transparent crystals and glasses. Although gas-filled hollow-core photonic crystal fiber provides pressure-tunable dispersion, long well-controlled optical path-lengths, and high Raman conversion efficiency, it is unable to preserve circular polarization state, typically exhibiting weak linear birefringence. Here we report a revolutionary approach based on helically-twisted hollow-core photonic crystal fiber, which displays circular birefringence, thus robustly maintaining circular polarization state against external perturbations. This makes it possible to generate pure circularly-polarized Stokes and anti-Stokes signals by rotational Raman scattering in hydrogen. The polarization state of the frequency-shifted Raman bands can be continuously varied by tuning the gas pressure in the vicinity of the gain suppression point. The results pave the way to a new generation of compact and efficient fiber-based sources of broadband light with fully-controllable polarization state. △ Less

Submitted 15 April, 2019; originally announced April 2019.

Comments: 5 pages, 4 figures

Journal ref: Physical Review Letters 122, 143902 (2019)

Predicting human decisions with behavioral theories and machine learning

Authors: Ori Plonsky, Reut Apel, Eyal Ert, Moshe Tennenholtz, David Bourgin, Joshua C. Peterson, Daniel Reichman, Thomas L. Griffiths, Stuart J. Russell, Evan C. Carter, James F. Cavanagh, Ido Erev

Abstract: Predicting human decision-making under risk and uncertainty represents a quintessential challenge that spans economics, psychology, and related disciplines. Despite decades of research effort, no model can be said to accurately describe and predict human choice even for the most stylized tasks like choice between lotteries. Here, we introduce BEAST Gradient Boosting (BEAST-GB), a novel hybrid mode… ▽ More Predicting human decision-making under risk and uncertainty represents a quintessential challenge that spans economics, psychology, and related disciplines. Despite decades of research effort, no model can be said to accurately describe and predict human choice even for the most stylized tasks like choice between lotteries. Here, we introduce BEAST Gradient Boosting (BEAST-GB), a novel hybrid model that synergizes behavioral theories, specifically the model BEAST, with machine learning techniques. First, we show the effectiveness of BEAST-GB by describing CPC18, an open competition for prediction of human decision making under risk and uncertainty, in which BEAST-GB won. Second, we show that it achieves state-of-the-art performance on the largest publicly available dataset of human risky choice, outperforming purely data-driven neural networks, indicating the continued relevance of BEAST theoretical insights in the presence of large data. Third, we demonstrate BEAST-GB's superior predictive power in an ensemble of choice experiments in which the BEAST model alone falters, underscoring the indispensable role of machine learning in interpreting complex idiosyncratic behavioral data. Finally, we show BEAST-GB also displays robust domain generalization capabilities as it effectively predicts choice behavior in new experimental contexts that it was not trained on. These results confirm the potency of combining domain-specific theoretical frameworks with machine learning, underscoring a methodological advance with broad implications for modeling decisions in diverse environments. △ Less

Submitted 18 April, 2024; v1 submitted 15 April, 2019; originally announced April 2019.

Comments: This version includes a large and significant update on the previous (2019) version

Rotation-assisted wet-spinning of UV-cured gelatin fibres and nonwovens

Authors: Jessica Rickman, Giuseppe Tronci, He Liang, Stephen J. Russell

Abstract: Photoinduced network formation is an attractive strategy for designing water-insoluble gelatin fibres as medical device building blocks and for enabling late-stage property customisation. However, mechanically-competent, long-lasting filaments are still hard to realise with current photoactive, e.g. methacrylated, gelatin systems due to inherent spinning instability and restricted coagulation capa… ▽ More Photoinduced network formation is an attractive strategy for designing water-insoluble gelatin fibres as medical device building blocks and for enabling late-stage property customisation. However, mechanically-competent, long-lasting filaments are still hard to realise with current photoactive, e.g. methacrylated, gelatin systems due to inherent spinning instability and restricted coagulation capability. To explore this challenge, we present a multiscale approach combining the synthesis of 4-vinylbenzyl chloride (4VBC)-functionalised gelatin (Gel-4VBC) with a voltage-free spinning and UV-curing process so that biopolymer networks in the form of either individual fibres or nonwovens could be successfully manufactured. In comparison to state-of-the-art methacrylated gelatin, the mechanical properties of UV-cured Gel-4VBC fibres were readily modulated by adjustment of coagulation conditions, so that an ultimate tensile strength and strain at break of up to ~80 MPa and ~9 % were measured, respectively. The sequential functionalisation /spinning route proved to be highly scalable, so that one step spunlaid formation of fibroblast-friendly nonwoven fabrics was successfully demonstrated with wet spun Gel-4VBC fibres. The presented approach could be exploited to generate a library of gelatin building blocks tuneable from the molecular to the macroscopic level to deliver computer-controlled extrusion of fibres and nonwovens according to defined clinical applications. △ Less

Submitted 6 March, 2019; originally announced March 2019.

Comments: 31 oages, 10 Figures, 2 Supplemental Figures, 3 Tables. To appear in Journal of Materials Science

Monomer-induced customisation of UV-cured atelocollagen hydrogel networks

Authors: He Liang, Stephen J. Russell, David J. Wood, Giuseppe Tronci

Abstract: The covalent functionalisation of type I atelocollagen with either 4-vinylbenzyl or methacrylamide residues is presented as a simple synthetic strategy to achieve customisable, cell-friendly UV-cured hydrogel networks with widespread clinical applicability. Molecular parameters, i.e. the type of monomer, degree of atelocollagen functionalisation and UV curing solution, have been systematically var… ▽ More The covalent functionalisation of type I atelocollagen with either 4-vinylbenzyl or methacrylamide residues is presented as a simple synthetic strategy to achieve customisable, cell-friendly UV-cured hydrogel networks with widespread clinical applicability. Molecular parameters, i.e. the type of monomer, degree of atelocollagen functionalisation and UV curing solution, have been systematically varied and their effect on gelation kinetics, swelling behaviour, elastic properties and enzymatic degradability investigated. UV-cured hydrogel networks deriving from atelocollagen precursors functionalised with equivalent molar content of 4-vinylbenzyl and methacrylamide adducts proved to display remarkably-different swelling ratio, storage modulus and collagenase resistance, similarly to the case of UV-cured hydrogel networks obtained with the same type of methacrylamide adduct, but varied degree of functionalisation. UV-induced network formation of 4VBC functionalised atelocollagen molecules yielded hydrogels with increased stiffness and enzymatic stability, attributed to the molecular rigidity of resulting aromatised crosslinking segment, whilst no toxic response was observed with osteosarcoma G292 cells. Although to a lesser extent, the pH of the UV-curing solution also proved to affect macroscopic hydrogel properties, likely due to the altered organisation of atelocollagen molecules during network formation. By leveraging the knowledge gained with classic synthetic networks, this study highlights how the type of monomer can be conveniently exploited to realise customisable atelocollagen hydrogels with controlled structure-property relationships to meet the requirements of unmet clinical applications. △ Less

Submitted 13 December, 2018; v1 submitted 3 December, 2018; originally announced December 2018.

Comments: 10 figures, 2 tables, 3 supplementary figures, Frontiers in Chemistry 2018

Thresholdless deep and vacuum ultraviolet Raman frequency conversion in H$_2$-filled photonic crystal fiber

Authors: Manoj K. Mridha, Pooria Hosseini, David Novoa, Philip St. J. Russell

Abstract: Coherent ultraviolet (UV) light has many uses, for example in the study of molecular species relevant in biology and chemistry. Very few if any laser materials offer UV transparency along with damage-free operation at high photon energies and laser power. Here we report efficient generation of deep and vacuum UV light using hydrogen-filled hollow-core photonic crystal fiber (HC-PCF). Pumping above… ▽ More Coherent ultraviolet (UV) light has many uses, for example in the study of molecular species relevant in biology and chemistry. Very few if any laser materials offer UV transparency along with damage-free operation at high photon energies and laser power. Here we report efficient generation of deep and vacuum UV light using hydrogen-filled hollow-core photonic crystal fiber (HC-PCF). Pumping above the stimulated Raman threshold at 532 nm, coherent molecular vibrations are excited in the gas, permitting highly efficient thresholdless wavelength conversion in the UV. The system is uniquely pressure-tunable, allows spatial structuring of the out-coupled radiation, and shows excellent performance in the vacuum UV. It can also in principle operate at the single-photon level, when all other approaches are extremely inefficient. △ Less

Submitted 14 November, 2018; originally announced November 2018.

Comments: 18 pages: 7 pages main paper, 11 pages supplementary material; 10 figures in total

Direct characterisation of tuneable few-femtosecond dispersive-wave pulses in the deep UV

Authors: Christian Brahms, Dane R. Austin, Francesco Tani, Allan S. Johnson, Douglas Garratt, John C. Travers, John W. G. Tisch, Philip St. J. Russell, Jon P. Marangos

Abstract: Dispersive wave emission (DWE) in gas-filled hollow-core dielectric waveguides is a promising source of tuneable coherent and broadband radiation, but so far the generation of few-femtosecond pulses using this technique has not been demonstrated. Using in-vacuum frequency-resolved optical gating, we directly characterise tuneable 3fs pulses in the deep ultraviolet generated via DWE. Through numeri… ▽ More Dispersive wave emission (DWE) in gas-filled hollow-core dielectric waveguides is a promising source of tuneable coherent and broadband radiation, but so far the generation of few-femtosecond pulses using this technique has not been demonstrated. Using in-vacuum frequency-resolved optical gating, we directly characterise tuneable 3fs pulses in the deep ultraviolet generated via DWE. Through numerical simulations, we identify that the use of a pressure gradient in the waveguide is critical for the generation of short pulses. △ Less

Submitted 4 March, 2019; v1 submitted 31 October, 2018; originally announced October 2018.

Comments: 5 pages, 4 figures

Journal ref: Optics Letters, vol. 44, no. 4, p. 731, Feb. 2019

UV soliton dynamics and Raman-enhanced supercontinuum generation in photonic crystal fiber

Authors: Pooria Hosseini, Alexey Ermolov, Francesco Tani, David Novoa, Philip St. J. Russell

Abstract: Ultrafast broadband ultraviolet radiation is of importance in spectroscopy and photochemistry, since high photon energies enable single-photon excitations and ultrashort pulses allow time-resolved studies. Here we report the use of gas-filled hollow-core photonic crystal fibers (HC-PCFs) for efficient ultrafast nonlinear optics in the ultraviolet. Soliton self-compression of 400 nm pulses of (unpr… ▽ More Ultrafast broadband ultraviolet radiation is of importance in spectroscopy and photochemistry, since high photon energies enable single-photon excitations and ultrashort pulses allow time-resolved studies. Here we report the use of gas-filled hollow-core photonic crystal fibers (HC-PCFs) for efficient ultrafast nonlinear optics in the ultraviolet. Soliton self-compression of 400 nm pulses of (unprecedentedly low) ~500 nJ energies down to sub-6-fs durations is achieved, as well as resonant emission of tunable dispersive waves from these solitons. In addition, we discuss the generation of a flat supercontinuum extending from the deep ultraviolet to the visible in a hydrogen-filled HC-PCF. Comparisons with argon-filled fibers show that the enhanced Raman gain at high frequencies makes the hydrogen system more efficient. As HC-PCF technology develops, we expect these fiber-based ultraviolet sources to lead to new applications. △ Less

Submitted 4 October, 2018; originally announced October 2018.

Journal ref: ACS Photonics 2018 5 (6), 2426-2430

Long-lived refractive index changes induced by femtosecond ionization in gas-filled single-ring photonic crystal fibers

Authors: Johannes R. Koehler, Felix Köttig, Barbara M. Trabold, Francesco Tani, Philip St. J. Russell

Abstract: We investigate refractive index changes caused by femtosecond photoionization in a gas-filled hollow-core photonic crystal fiber. Using spatially-resolved interferometric side-probing, we find that these changes live for tens of microseconds after the photoionization event - eight orders of magnitude longer than the pulse duration. Oscillations in the megahertz frequency range are simultaneously o… ▽ More We investigate refractive index changes caused by femtosecond photoionization in a gas-filled hollow-core photonic crystal fiber. Using spatially-resolved interferometric side-probing, we find that these changes live for tens of microseconds after the photoionization event - eight orders of magnitude longer than the pulse duration. Oscillations in the megahertz frequency range are simultaneously observed, caused by mechanical vibrations of the thin-walled capillaries surrounding the hollow core. These two non-local effects can affect the propagation of a second pulse that arrives within their lifetime, which works out to repetition rates of tens of kilohertz. Filling the fiber with an atomically lighter gas significantly reduces ionization, lessening the strength of the refractive index changes. The results will be important for understanding the dynamics of gas-based fiber systems operating at high intensities and high repetition rates, when temporally non-local interactions between successive laser pulses become relevant. △ Less

Submitted 20 September, 2018; originally announced September 2018.

Comments: 5 pages with four figures and one table

Journal ref: Phys. Rev. Applied 10, 064020 (2018)

Non-covalent bonds between optical solitons in an optoacoustically mode-locked fiber laser: Analysis & modelling

Authors: W. He, M. Pang, D. H. Yeh, J. Huang, C. R. Menyuk, P. St. J. Russell

Abstract: Binding of particles through weak (non-covalent) interactions plays a central role in multiple modern disciplines, from Cooper pairing of electrons in superconductivity to formation of supramolecules in biochemistry. Optical solitons, which are analogous in many ways to particles, arise from a balance between nonlinearity and dispersion and have only been known to be able to form molecule-like, lo… ▽ More Binding of particles through weak (non-covalent) interactions plays a central role in multiple modern disciplines, from Cooper pairing of electrons in superconductivity to formation of supramolecules in biochemistry. Optical solitons, which are analogous in many ways to particles, arise from a balance between nonlinearity and dispersion and have only been known to be able to form molecule-like, localized structures through covalent interactions due to direct overlapping. Non-covalent binding of optical solitons that based on long-rang interactions have, however, so far escaped experimental observations. Long-range interactions between optical solitons have proven almost impossible to control, generally leading to disorder. In this paper, however we show that by tailoring weak, long-range soliton interactions, a large population of optical solitons in an optoacoustic mode-locking fiber laser can assemble into stable, highly-ordered structures that resemble biochemical supramolecules. We demonstrate here a theoretical model of the non-covalent binding mechanism, and provide some experimental results supporting this model. △ Less

Submitted 27 July, 2018; originally announced August 2018.

Comments: arXiv admin note: substantial text overlap with arXiv:1710.01034

Strong circular dichroism in twisted single-ring hollow-core photonic crystal fiber

Authors: P. Roth, Y. Chen, M. C. Günendi, R. Beravat, N. N. Edavalath, M. H. Frosz, G. Ahmed, G. K. L. Wong, P. St. J. Russell

Abstract: We report a series of experimental, analytical and numerical studies demonstrating strong circular dichroism in helically twisted hollow-core single-ring photonic crystal fiber (SR-PCF), formed by spinning the preform during fiber drawing. In the SR-PCFs studied, the hollow core is surrounded by a single ring of non-touching capillaries. Coupling between these capillaries results in the formation… ▽ More We report a series of experimental, analytical and numerical studies demonstrating strong circular dichroism in helically twisted hollow-core single-ring photonic crystal fiber (SR-PCF), formed by spinning the preform during fiber drawing. In the SR-PCFs studied, the hollow core is surrounded by a single ring of non-touching capillaries. Coupling between these capillaries results in the formation of helical Bloch modes carrying orbital angular momentum. In the twisted fiber, strong circular birefringence appears in the ring, so that when a core mode with a certain circular polarization state (say LC) phase-matches to the ring, the other (RC) is strongly dephased. If in addition the orbital angular momentum is the same in core and ring, and the polarization states are non-orthogonal (e.g., slightly elliptical), the LC core mode will experience high loss while the RC mode is efficiently transmitted. The result is a single-circular-polarization SR-PCF that acts as a circular polarizer over a certain wavelength range. Such fibers have many potential applications, for example, for generating circularly polarized light in gas-filled SR-PCF and realizing polarizing elements in the deep and vacuum ultraviolet. △ Less

Submitted 30 July, 2018; originally announced July 2018.

Excitation of higher-order modes in optofluidic photonic crystal fiber

Authors: Andrei Ruskuc, Philipp Koehler, Marius A. Weber, Ana Andres-Arroyo, Michael H. Frosz, Philip St. J. Russell, Tijmen G. Euser

Abstract: Higher-order modes up to LP$_{33}$ are controllably excited in water-filled kagomé- and bandgap-style hollow-core photonic crystal fibers (HC-PCF). A spatial light modulator is used to create amplitude and phase distributions that closely match those of the fiber modes, resulting in typical launch efficiencies of 10-20% into the liquid-filled core. Modes, excited across the visible wavelength rang… ▽ More Higher-order modes up to LP$_{33}$ are controllably excited in water-filled kagomé- and bandgap-style hollow-core photonic crystal fibers (HC-PCF). A spatial light modulator is used to create amplitude and phase distributions that closely match those of the fiber modes, resulting in typical launch efficiencies of 10-20% into the liquid-filled core. Modes, excited across the visible wavelength range, closely resemble those observed in air-filled kagomé HC-PCF and match numerical simulations. Mode indices are obtained by launching plane-waves at specific angles onto the fiber input-face and comparing the resulting intensity pattern to that of a particular mode. These results provide a framework for spatially-resolved sensing in HC-PCF microreactors and fiber-based optical manipulation. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Optomechanical cooling and self-stabilization of a waveguide coupled to a whispering-gallery-mode resonator

Authors: Riccardo Pennetta, Shangran Xie, Richard Zeltner, Jonas Hammer, Philip St. J. Russell

Abstract: Laser cooling of mechanical degrees of freedom is one of the most significant achievements in the field of opto-mechanics. Here, we report, for the first time to the best of our knowledge, efficient passive optomechanical cooling of the motion of a freestanding waveguide coupled to a whispering-gallery-mode (WGM) resonator. The waveguide is an 8 mm long glass-fiber nanospike, which has a fundament… ▽ More Laser cooling of mechanical degrees of freedom is one of the most significant achievements in the field of opto-mechanics. Here, we report, for the first time to the best of our knowledge, efficient passive optomechanical cooling of the motion of a freestanding waveguide coupled to a whispering-gallery-mode (WGM) resonator. The waveguide is an 8 mm long glass-fiber nanospike, which has a fundamental flexural resonance at Ω/2π = 2.5 kHz and a Q-factor of 1.2 10**5. Upon launching 250 μW laser power at an optical frequency close to the WGM resonant frequency, we observed cooling of the nanospike resonance from room temperature down to 1.8 K. Simultaneous cooling of the first higher-order mechanical mode is also observed. The strong suppression of the overall Brownian motion of the nanospike, observed as an 11.6 dB reduction in its mean square displacement, indicates strong optomechanical stabilization of linear coupling between the nanospike and the cavity mode. The cooling is caused predominantly by a combination of photothermal effects and optical forces between nanospike and WGM resonator. The results are of direct relevance in the many applications of WGM resonators, including atom physics, optomechanics, and sensing. △ Less

Submitted 1 September, 2020; v1 submitted 24 April, 2018; originally announced April 2018.

Comments: 13 pages, 7 figures

Journal ref: Photon. Res. 8, 844-851 (2020)

Dominance of backward stimulated Raman scattering in gas-filled hollow-core photonic crystal fibers

Authors: Manoj K. Mridha, David Novoa, Philip St. J. Russell

Abstract: Backward stimulated Raman scattering in gases provides a promising route to compression and amplification of a Stokes seed-pulse by counter-propagating against a pump-pulse, as has been already demonstrated in various platforms, mainly in free-space. However, the dynamics governing this process when seeded by noise has not yet been investigated in a fully controllable collinear environment. Here w… ▽ More Backward stimulated Raman scattering in gases provides a promising route to compression and amplification of a Stokes seed-pulse by counter-propagating against a pump-pulse, as has been already demonstrated in various platforms, mainly in free-space. However, the dynamics governing this process when seeded by noise has not yet been investigated in a fully controllable collinear environment. Here we report the first unambiguous observation of efficient noise-seeded backward stimulated Raman scattering in a hydrogen-filled hollow-core photonic crystal fiber. At high gas pressures, when the backward Raman gain is comparable with, but lower than, the forward gain, we report quantum conversion efficiencies exceeding 40% to the backward Stokes at 683 nm from a narrowband 532-nm-pump. The efficiency increases to 65% when the backward process is seeded by a small amount of back-reflected forward-generated Stokes light. At high pump powers the backward Stokes signal, emitted in a clean fundamental mode and spectrally pure, is unexpectedly always stronger than its forward-propagating counterpart. We attribute this striking observation to the unique temporal dynamics of the interacting fields, which cause the Raman coherence (which takes the form of a moving fine-period Bragg grating) to grow in strength towards the input end of the fiber. A good understanding of this process, together with the rapid development of novel anti-resonant-guiding hollow-core fibers, may lead to improved designs of efficient gas-based Raman lasers and amplifiers operating at wavelengths from the ultraviolet to the mid-infrared. △ Less

Submitted 24 January, 2018; originally announced January 2018.

Comments: 6 pages and 8 figures in the main section. 4 pages and 5 figures in the supplementary section

Journal ref: Optica 5, 570-576 (2018)

Flying Particle Microlaser and Temperature Sensor in Hollow-Core Photonic Crystal Fiber

Authors: Richard Zeltner, Riccardo Pennetta, Shangran Xie, Philip St. J. Russell

Abstract: Whispering-gallery mode (WGM) resonators combine small optical mode volumes with narrow resonance linewidths, making them exciting platforms for a variety of applications. Here we report a flying WGM microlaser, realized by optically trapping a dye-doped microparticle within a liquid-filled hollow-core photonic crystal fiber (HC-PCF) using a CW laser and then pumping it with a pulsed excitation la… ▽ More Whispering-gallery mode (WGM) resonators combine small optical mode volumes with narrow resonance linewidths, making them exciting platforms for a variety of applications. Here we report a flying WGM microlaser, realized by optically trapping a dye-doped microparticle within a liquid-filled hollow-core photonic crystal fiber (HC-PCF) using a CW laser and then pumping it with a pulsed excitation laser whose wavelength matches the absorption band of the dye. The laser emits into core-guided modes that can be detected at the endfaces of the HC-PCF. Using radiation forces, the microlaser can be freely propelled along the HC-PCF over multi-cm distances - orders of magnitude further than in previous experiments where tweezers and fiber traps were used. The system can be used to measure temperature with high spatial resolution, by exploiting the temperature-dependent frequency shift of the lasing modes, and also for precise delivery of light to remote locations. △ Less

Submitted 6 October, 2017; originally announced October 2017.

Effect of anti-crossings with cladding resonances on ultrafast nonlinear dynamics in gas-filled PCFs

Authors: Francesco Tani, Felix Köttig, David Novoa, Ralf Keding, Philip St. J. Russell

Abstract: Spectral anti-crossings between the fundamental guided mode and core wall resonances alter the dispersion in hollow-core anti-resonant-reflection photonic crystal fibers. Here we study the effect of this dispersion change on the nonlinear propagation and dynamics of ultrashort pulses. We find that it causes emission of narrow spectral peaks through a combination of four-wave mixing and dispersive… ▽ More Spectral anti-crossings between the fundamental guided mode and core wall resonances alter the dispersion in hollow-core anti-resonant-reflection photonic crystal fibers. Here we study the effect of this dispersion change on the nonlinear propagation and dynamics of ultrashort pulses. We find that it causes emission of narrow spectral peaks through a combination of four-wave mixing and dispersive wave emission. We further investigate the influence of the anti-crossings on nonlinear pulse propagation and show that their impact can be minimized by adjusting the core-wall thickness in such a way that the anti-crossings lie spectrally distant from the pump wavelength. △ Less

Submitted 4 October, 2017; originally announced October 2017.

Comments: 5 pages, 5 figures

Journal ref: Photonics Research Vol. 6, Issue 2, pp. 84-88 (2018)

Supramolecular transmission of soliton-encoded bit streams over astronomical distances

Authors: W. He, M. Pang, D. H. Yeh, J. Huang, C. R. Menyuk, P. St. J. Russell

Abstract: A stream of optical pulses, transmitted over long distances in optical fiber, will be affected by a variety of noise sources, leading to degradation in the signal-to-noise ratio. This noise accumulation sets generic capacity limits of all fiber-based optical signal transmission systems and has long been regarded as unavoidable. We report that by tailoring long-range, non-covalent inter-pulse inter… ▽ More A stream of optical pulses, transmitted over long distances in optical fiber, will be affected by a variety of noise sources, leading to degradation in the signal-to-noise ratio. This noise accumulation sets generic capacity limits of all fiber-based optical signal transmission systems and has long been regarded as unavoidable. We report that by tailoring long-range, non-covalent inter-pulse interactions, optical solitons in a fiber laser loop can robustly couple to each other and self-assemble into supramolecular structures that exhibit long-term stability, elementary diversity and the possibility of information encoding. We demonstrate error-free transmission of such self-assembled solitonic structures over many astronomical units without any active retiming, opening up the possibility of using bit-bit interactions to overcome noise accumulation in optical fiber telecommunications and bit-storage systems. △ Less

Submitted 31 July, 2018; v1 submitted 3 October, 2017; originally announced October 2017.

Comments: 19 pages, 3 figures in main text, 7 figures in supplementary information

Antibacterial properties of nonwoven wound dressings coated with Manuka honey or methylglyoxal

Authors: Sophie E. L. Bulman, Giuseppe Tronci, Parikshit Goswami, Chris Carr, Stephen J. Russell

Abstract: Manuka honey (MH) is used as an antibacterial agent in bioactive wound dressings via direct impregnation onto a suitable substrate. MH provides unique antibacterial activity when compared with conventional honeys, owing partly to one of its constituents, methylglyoxal (MGO). Aiming to investigate an antibiotic-free antimicrobial strategy, we studied the antibacterial activity of both MH and MGO (a… ▽ More Manuka honey (MH) is used as an antibacterial agent in bioactive wound dressings via direct impregnation onto a suitable substrate. MH provides unique antibacterial activity when compared with conventional honeys, owing partly to one of its constituents, methylglyoxal (MGO). Aiming to investigate an antibiotic-free antimicrobial strategy, we studied the antibacterial activity of both MH and MGO (at equivalent MGO concentrations) when applied as a physical coating to a nonwoven fabric wound dressing. When physically coated on to a cellulosic hydroentangled nonwoven fabric, it was found that concentrations of 0.0054 mg cm-2 of MGO in the form of MH and MGO was sufficient to achieve 100 CFU% bacteria reduction against gram-positive Staphylococcus aureus and gram-negative Klebsiella pneumoniae, based on BS EN ISO 20743:2007. A 3- to 20- fold increase in MGO concentration (0.0170 - 0.1 mg cm-2) was required to facilitate a good antibacterial effect (based on BS EN ISO 20645:2004) in terms of zone of inhibition and lack of growth under the sample. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) was also assessed for MGO in liquid form against three prevalent wound and healthcare-associated pathogens, i.e. Staphylococcus aureus, gram-negative Pseudomonas aeruginosa and gram-positive Enterococcus faecalis. Other than the case of MGO-containing fabrics, solutions with much higher MGO concentrations (128 mg L-1 - 1024 mg L-1) were required to provide either a bacteriostatic or bactericidal effect. The results presented in this study therefore demonstrate the relevance of MGO-based coating as an environment-friendly strategy for the design of functional dressings with antibiotic-free antimicrobial chemistries. △ Less

Submitted 13 August, 2017; originally announced September 2017.

Comments: 19 pages, 4 figures, 7 tables. Accepted in Materials