-
Beyond the blur: using experimentally determined point spread functions to improve scanning Kelvin probe imaging
Authors:
Isaac C. D. Lenton,
Felix Pertl,
Lubuna Shafeek,
Scott R. Waitukaitis
Abstract:
Scanning Kelvin probe microscopy (SKPM) is a powerful technique for investigating the electrostatic properties of material surfaces, enabling the imaging of variations in work function, topology, surface charge density, or combinations thereof. Regardless of the underlying signal source, SKPM results in a voltage image which is spatially distorted due to the finite size of the probe, long-range el…
▽ More
Scanning Kelvin probe microscopy (SKPM) is a powerful technique for investigating the electrostatic properties of material surfaces, enabling the imaging of variations in work function, topology, surface charge density, or combinations thereof. Regardless of the underlying signal source, SKPM results in a voltage image which is spatially distorted due to the finite size of the probe, long-range electrostatic interactions, mechanical and electrical noise, and the finite response time of the electronics. In order to recover the underlying signal, it is necessary to deconvolve the measurement with an appropriate point spread function (PSF) that accounts the aforementioned distortions, but determining this PSF is difficult. Here we describe how such PSFs can be determined experimentally, and show how they can be used to recover the underlying information of interest. We first consider the physical principles that enable SKPM, and discuss how these affect the system PSF. We then show how one can experimentally measure PSFs by looking at well defined features, and that these compare well to simulated PSFs, provided scans are performed extremely slowly and carefully. Next, we work at realistic scan speeds, and show that the idealised PSFs fail to capture temporal distortions in the scan direction. While simulating PSFs for these situations would be quite challenging, we show that measuring PSFs with similar scan conditions works well. Our approach clarifies the basic principles of and inherent challenges to SKPM measurements, and gives practical methods to improve results
△ Less
Submitted 25 July, 2024; v1 submitted 4 April, 2024;
originally announced April 2024.
-
Quantum Fluctuations Suppress the Critical Fields in BaCo$_2$(AsO$_4$)$_2$
Authors:
Shiva Safari,
William Bateman-Hemphill,
Asimpunya Mitra,
Félix Desrochers,
Emily Z. Zhang,
Lubuna Shafeek,
Austin Ferrenti,
Tyrel M. McQueen,
Arkady Shekhter,
Zoltán Köllö,
Yong Baek Kim,
B. J. Ramshaw,
K. A. Modic
Abstract:
Early efforts to realize exotic quantum ground states in frustrated magnets focused on frustration arising from the lattice geometry alone. Attention has shifted to bond-dependent anisotropic interactions, as well as further-neighbor interactions, on non-geometrically-frustrated lattices due to their greater versatility. The honeycomb magnet BaCo$_2$(AsO$_4$)$_2$ recently emerged as a candidate ho…
▽ More
Early efforts to realize exotic quantum ground states in frustrated magnets focused on frustration arising from the lattice geometry alone. Attention has shifted to bond-dependent anisotropic interactions, as well as further-neighbor interactions, on non-geometrically-frustrated lattices due to their greater versatility. The honeycomb magnet BaCo$_2$(AsO$_4$)$_2$ recently emerged as a candidate host for both bond-dependent (e.g. Kitaev) and third-neighbor ($J_3$) interactions, and has become a model experimental system due to its relatively low levels of disorder. Understanding the relative importance of different exchange interactions holds the key to achieving novel ground states, such as quantum spin liquids. Here, we use the magnetotropic susceptibility to map out the intermediate and high-field phase diagram of BaCo$_2$(AsO$_4$)$_2$ as a function of the out-of-plane magnetic field direction at $T = 1.6$ K. We show that the experimental data are qualitatively consistent with classical Monte Carlo results of the XXZ-$J_1$-$J_3$ model with small Kitaev and off-diagonal exchange couplings included. However, the calculated critical fields are systematically larger than the experimental values. Infinite-DMRG computations on the quantum model reveal that quantum corrections from a nearby ferromagnetic state are likely responsible for the suppressed critical fields. Together, our experiment and theory analyses demonstrate that, while quantum fluctuations play an important role in determining the phase diagram, most of the physics of BaCo$_2$(AsO$_4$)$_2$ can be understood in terms of the classical dynamics of long-range ordered states, leaving little room for the possibility of a quantum spin liquid.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Quantifying nanoscale charge density features of contact-charged surfaces with an FEM/KPFM-hybrid approach
Authors:
Felix Pertl,
Juan Carlos Sobarzo,
Lubuna Shafeek,
Tobias Cramer,
Scott Waitukaitis
Abstract:
Kelvin probe force microscopy (KPFM) is a powerful tool for studying contact electrification at the nanoscale, but converting KPFM voltage maps to charge density maps is non-trivial due to long-range forces and complex system geometry. Here we present a strategy using finite element method (FEM) simulations to determine the Green's function of the KPFM probe/insulator/ground system, which allows u…
▽ More
Kelvin probe force microscopy (KPFM) is a powerful tool for studying contact electrification at the nanoscale, but converting KPFM voltage maps to charge density maps is non-trivial due to long-range forces and complex system geometry. Here we present a strategy using finite element method (FEM) simulations to determine the Green's function of the KPFM probe/insulator/ground system, which allows us to quantitatively extract surface charge. Testing our approach with synthetic data, we find that accounting for the AFM tip, cone and cantilever are necessary to recover a known input, and that commonly applied heuristics and approximations lead to gross miscalculation. Applying it to experimental data, we demonstrate its capacity to extract realistic surface charge densities and fine details from contact charged surfaces. Our method gives a straightforward recipe to convert qualitative KPFM voltage data into quantitative charge data over a range of experimental conditions, enabling quantitative contact electrification experiments at the nanoscale.
△ Less
Submitted 29 November, 2022; v1 submitted 5 September, 2022;
originally announced September 2022.