-
Development of MMC-based lithium molybdate cryogenic calorimeters for AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
H. Bae,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
S. Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev
, et al. (84 additional authors not shown)
Abstract:
The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is und…
▽ More
The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is under construction.This paper discusses the baseline design and characterization of the lithium molybdate cryogenic calorimeters to be used in the AMoRE-II detector modules. The results from prototype setups that incorporate new housing structures and two different crystal masses (316 g and 517 - 521 g), operated at 10 mK temperature, show energy resolutions (FWHM) of 7.55 - 8.82 keV at the 2.615 MeV $^{208}$Tl $γ$ line, and effective light detection of 0.79 - 0.96 keV/MeV. The simultaneous heat and light detection enables clear separation of alpha particles with a discrimination power of 12.37 - 19.50 at the energy region around $^6$Li(n, $α$)$^3$H with Q-value = 4.785 MeV. Promising detector performances were demonstrated at temperatures as high as 30 mK, which relaxes the temperature constraints for operating the large AMoRE-II array.
△ Less
Submitted 16 July, 2024;
originally announced July 2024.
-
Improved limit on neutrinoless double beta decay of \mohundred~from AMoRE-I
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (83 additional authors not shown)
Abstract:
AMoRE searches for the signature of neutrinoless double beta decay of $^{100}$Mo with a 100 kg sample of enriched $^{100}$Mo. Scintillating molybdate crystals coupled with a metallic magnetic calorimeter operate at milli-Kelvin temperatures to measure the energy of electrons emitted in the decay. As a demonstration of the full-scale AMoRE, we conducted AMoRE-I, a pre-experiment with 18 molybdate c…
▽ More
AMoRE searches for the signature of neutrinoless double beta decay of $^{100}$Mo with a 100 kg sample of enriched $^{100}$Mo. Scintillating molybdate crystals coupled with a metallic magnetic calorimeter operate at milli-Kelvin temperatures to measure the energy of electrons emitted in the decay. As a demonstration of the full-scale AMoRE, we conducted AMoRE-I, a pre-experiment with 18 molybdate crystals, at the Yangyang Underground Laboratory for over two years. The exposure was 8.02 kg$\cdot$year (or 3.89 kg$_{\mathrm{^{100}Mo}}\cdot$year) and the total background rate near the Q-value was 0.025 $\pm$ 0.002 counts/keV/kg/year. We observed no indication of $0νββ$ decay and report a new lower limit of the half-life of $^{100}$Mo $0νββ$ decay as $ T^{0ν}_{1/2}>3.0\times10^{24}~\mathrm{years}$ at 90\% confidence level. The effective Majorana mass limit range is $m_{ββ}<$(210--610) meV using nuclear matrix elements estimated in the framework of different models, including the recent shell model calculations.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Surface waves in randomly perturbed discrete models
Authors:
Josselin Garnier,
Basant Lal Sharma
Abstract:
We study the propagation of surface waves across structured surfaces with random, localized inhomogeneities. A discrete analogue of Gurtin-Murdoch model is employed and surface elasticity, in contrast to bulk elasticity, is captured by distinct point masses and elastic constants for nearest-neighbour interactions parallel to the surface. Expressions for the surface wave reflectance and transmittan…
▽ More
We study the propagation of surface waves across structured surfaces with random, localized inhomogeneities. A discrete analogue of Gurtin-Murdoch model is employed and surface elasticity, in contrast to bulk elasticity, is captured by distinct point masses and elastic constants for nearest-neighbour interactions parallel to the surface. Expressions for the surface wave reflectance and transmittance, as well as the radiative loss, are provided for every localized patch of point mass perturbation on the surface. As the main result in the article, we provide the statistics of surface wave reflectance and transmittance and the radiative loss for an ensemble of random mass perturbations, independent and identically distributed with mean zero, on the surface. In the weakly scattering regime, the mean radiative loss is found to be proportional to the size of the perturbed patch, to the variance of the mass perturbations, and to an effective parameter that depends on the continuous spectrum of the unperturbed system. In the strongly scattering regime, the mean radiative loss is found to depend on another effective parameter that depends on the continuous spectrum, but not on the variance of the mass perturbations. Numerical simulations are found in quantitative agreement with the theoretical predictions for several illustrative values of the surface structure parameters.
△ Less
Submitted 6 July, 2024;
originally announced July 2024.
-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Identifying Extreme Events in the Stock Market: A Topological Data Analysis
Authors:
Anish Rai,
Buddha Nath Sharma,
Salam Rabindrajit Luwang,
Md. Nurujjaman,
Sushovan Majhi
Abstract:
This paper employs Topological Data Analysis (TDA) to detect extreme events (EEs) in the stock market at a continental level. Previous approaches, which analyzed stock indices separately, could not detect EEs for multiple time series in one go. TDA provides a robust framework for such analysis and identifies the EEs during the crashes for different indices. The TDA analysis shows that $L^1$,…
▽ More
This paper employs Topological Data Analysis (TDA) to detect extreme events (EEs) in the stock market at a continental level. Previous approaches, which analyzed stock indices separately, could not detect EEs for multiple time series in one go. TDA provides a robust framework for such analysis and identifies the EEs during the crashes for different indices. The TDA analysis shows that $L^1$, $L^2$ norms and Wasserstein distance ($W_D$) of the world leading indices rise abruptly during the crashes, surpassing a threshold of $μ+4*σ$ where $μ$ and $σ$ are the mean and the standard deviation of norm or $W_D$, respectively. Our study identified the stock index crashes of the 2008 financial crisis and the COVID-19 pandemic across continents as EEs. Given that different sectors in an index behave differently, a sector-wise analysis was conducted during the COVID-19 pandemic for the Indian stock market. The sector-wise results show that after the occurrence of EE, we have observed strong crashes surpassing $μ+2*σ$ for an extended period for the banking sector. While for the pharmaceutical sector, no significant spikes were noted. Hence, TDA also proves successful in identifying the duration of shocks after the occurrence of EEs. This also indicates that the Banking sector continued to face stress and remained volatile even after the crash. This study gives us the applicability of TDA as a powerful analytical tool to study EEs in various fields.
△ Less
Submitted 25 May, 2024;
originally announced May 2024.
-
Construction of Permutation Polynomials over Finite Fields with the help of SCR polynomials
Authors:
Bidushi Sharma,
Dhiren Kumar Basnet
Abstract:
In this paper we take a deeper look at the self conjugate reciprocal (SCR) polynomials, which towards the end of the paper aid the construction of new classes of permutation trinomials and quadrinomials over $\mathbb{F}_{q^{2}}$. The paper focuses on the conditions required for a certain class of degree 2 and degree 3 SCR polynomials to have no roots in $μ_{q+1}$ (the set of $(q+1)-\emph{th}$ root…
▽ More
In this paper we take a deeper look at the self conjugate reciprocal (SCR) polynomials, which towards the end of the paper aid the construction of new classes of permutation trinomials and quadrinomials over $\mathbb{F}_{q^{2}}$. The paper focuses on the conditions required for a certain class of degree 2 and degree 3 SCR polynomials to have no roots in $μ_{q+1}$ (the set of $(q+1)-\emph{th}$ roots of unity), which helps in the determination of polynomials that permute $\mathbb{F}_{q^{2}}$. In the due course we also look upon some higher degree SCR polynomials which can be reduced down to a degree 2 SCR polynomial over both odd and even ordered fields. We furthur look upon the SCR polynomials of type $ax^{q+1}+bx^{q}+bx+a^{q}$ taking both the cases under consideration where $a\in \mathbb{F}_{q}$ and $a\in\mathbb{F}_{q^{2}}\setminus\mathbb{F}_{q}$.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Learning Sampling Distribution and Safety Filter for Autonomous Driving with VQ-VAE and Differentiable Optimization
Authors:
Simon Idoko,
Basant Sharma,
Arun Kumar Singh
Abstract:
Sampling trajectories from a distribution followed by ranking them based on a specified cost function is a common approach in autonomous driving. Typically, the sampling distribution is hand-crafted (e.g a Gaussian, or a grid). Recently, there have been efforts towards learning the sampling distribution through generative models such as Conditional Variational Autoencoder (CVAE). However, these ap…
▽ More
Sampling trajectories from a distribution followed by ranking them based on a specified cost function is a common approach in autonomous driving. Typically, the sampling distribution is hand-crafted (e.g a Gaussian, or a grid). Recently, there have been efforts towards learning the sampling distribution through generative models such as Conditional Variational Autoencoder (CVAE). However, these approaches fail to capture the multi-modality of the driving behaviour due to the Gaussian latent prior of the CVAE. Thus, in this paper, we re-imagine the distribution learning through vector quantized variational autoencoder (VQ-VAE), whose discrete latent-space is well equipped to capture multi-modal sampling distribution. The VQ-VAE is trained with demonstration data of optimal trajectories. We further propose a differentiable optimization based safety filter to minimally correct the VQVAE sampled trajectories to ensure collision avoidance. We use backpropagation through the optimization layers in a self-supervised learning set-up to learn good initialization and optimal parameters of the safety filter. We perform extensive comparisons with state-of-the-art CVAE-based baseline in dense and aggressive traffic scenarios and show a reduction of up to 12 times in collision-rate while being competitive in driving speeds.
△ Less
Submitted 25 April, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
A Note On Lookahead In Real Life And Computing
Authors:
Burle Sharma,
Rakesh Mohanty,
Sucheta Panda
Abstract:
Past, Present and Future are considered to be three temporal and logical concepts which are well defined by human beings for their existence and growth. We, as human beings, have the privilege of using our intelligence to mentally execute an activity before physical occurrence of the same in the real world. Knowledge of the past, aplomb of present and visualisation for the future correspond to thr…
▽ More
Past, Present and Future are considered to be three temporal and logical concepts which are well defined by human beings for their existence and growth. We, as human beings, have the privilege of using our intelligence to mentally execute an activity before physical occurrence of the same in the real world. Knowledge of the past, aplomb of present and visualisation for the future correspond to three concepts such as look-back, look-at and look-ahead respectively in real life as well as in diversified domains of computing. Look-Ahead(LA) deals with the future prediction of information and processing of input to produce the output in advance. In this article, our main objective is to learn, understand and explore the concept of LA and design novel models as solution for real world problems. We present three well known algorithmic frameworks used in practice based on availability of input information such as offline, online and semi-online. We introduce interesting real life applications and well known computing problems where LA plays a significant role for making a process, system or algorithm efficient. We define new types of LA and propose a taxonomy for LA based on literature review for designing novel LA models in future. Using the concept of LA, We identify and present many interesting and non-trivial research challenges as future potential research directions. Intuitively, we observe that LA can be used as a powerful tool and framework for future researchers in design of efficient computational models and algorithms for solving non-trivial and challenging optimization problems.
△ Less
Submitted 2 February, 2024;
originally announced March 2024.
-
Smart Textile-Driven Soft Spine Exosuit for Lifting Tasks in Industrial Applications
Authors:
Kefan Zhu,
Bibhu Sharma,
Phuoc Thien Phan,
James Davies,
Mai Thanh Thai,
Trung Thien Hoang,
Chi Cong Nguyen,
Adrienne Ji,
Emanuele Nicotra,
Nigel H. Lovell,
Thanh Nho Do
Abstract:
Work related musculoskeletal disorders (WMSDs) are often caused by repetitive lifting, making them a significant concern in occupational health. Although wearable assist devices have become the norm for mitigating the risk of back pain, most spinal assist devices still possess a partially rigid structure that impacts the user comfort and flexibility. This paper addresses this issue by presenting a…
▽ More
Work related musculoskeletal disorders (WMSDs) are often caused by repetitive lifting, making them a significant concern in occupational health. Although wearable assist devices have become the norm for mitigating the risk of back pain, most spinal assist devices still possess a partially rigid structure that impacts the user comfort and flexibility. This paper addresses this issue by presenting a smart textile actuated spine assistance robotic exosuit (SARE), which can conform to the back seamlessly without impeding the user movement and is incredibly lightweight. The SARE can assist the human erector spinae to complete any action with virtually infinite degrees of freedom. To detect the strain on the spine and to control the smart textile automatically, a soft knitting sensor which utilizes fluid pressure as sensing element is used. The new device is validated experimentally with human subjects where it reduces peak electromyography (EMG) signals of lumbar erector spinae by around 32 percent in loaded and around 22 percent in unloaded conditions. Moreover, the integrated EMG decreased by around 24.2 percent under loaded condition and around 23.6 percent under unloaded condition. In summary, the artificial muscle wearable device represents an anatomical solution to reduce the risk of muscle strain, metabolic energy cost and back pain associated with repetitive lifting tasks.
△ Less
Submitted 3 February, 2024;
originally announced February 2024.
-
Molecular Beam Epitaxy of GaN Nanowires on Epitaxial Graphene
Authors:
Sergio Fernández-Garrido,
Manfred Ramsteiner,
Guanhui Gao,
Lauren A. Galves,
Bharat Sharma,
Pierre Corfdir,
Gabriele Calabrese,
Ziani de Souza Schiaber,
Carsten Pfüller,
Achim Trampert,
João Marcelo J. Lopes,
Oliver Brandt,
Lutz Geelhaar
Abstract:
We demonstrate an all-epitaxial and scalable growth approach to fabricate single-crystalline GaN nanowires on graphene by plasma-assisted molecular beam epitaxy. As substrate, we explore several types of epitaxial graphene layer structures synthesized on SiC. The different structures differ mainly in their total number of graphene layers. Because graphene is found to be etched under active N expos…
▽ More
We demonstrate an all-epitaxial and scalable growth approach to fabricate single-crystalline GaN nanowires on graphene by plasma-assisted molecular beam epitaxy. As substrate, we explore several types of epitaxial graphene layer structures synthesized on SiC. The different structures differ mainly in their total number of graphene layers. Because graphene is found to be etched under active N exposure, the direct growth of GaN nanowires on graphene is only achieved on multilayer graphene structures. The analysis of the nanowire ensembles prepared on multilayer graphene by Raman spectroscopy and transmission electron microscopy reveals the presence of graphene underneath as well as in between nanowires, as desired for the use of this material as contact layer in nanowire-based devices. The nanowires nucleate preferentially at step edges, are vertical, well aligned, epitaxial, and of comparable structural quality as similar structures fabricated on conventional substrates.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Inverse source problem for discrete Helmholtz equation
Authors:
Roman Novikov,
Basant Lal Sharma
Abstract:
We consider multi-frequency inverse source problem for the discrete Helmholtz operator on the square lattice $\mathbb{Z}^d$, $d \ge 1$. We consider this problem for the cases with and without phase information. We prove uniqueness results and present examples of non-uniqueness for this problem for the case of compactly supported source function, and a Lipshitz stability estimate for the phased cas…
▽ More
We consider multi-frequency inverse source problem for the discrete Helmholtz operator on the square lattice $\mathbb{Z}^d$, $d \ge 1$. We consider this problem for the cases with and without phase information. We prove uniqueness results and present examples of non-uniqueness for this problem for the case of compactly supported source function, and a Lipshitz stability estimate for the phased case is established. Relations with inverse scattering problem for the discrete Schrödinger operators in the Born approximation are also provided.
△ Less
Submitted 6 July, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
Background study of the AMoRE-pilot experiment
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (83 additional authors not shown)
Abstract:
We report a study on the background of the Advanced Molybdenum-Based Rare process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb) of $^{100}$Mo. The pilot stage of the experiment was conducted using $\sim$1.9 kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea, from 2015 to 2018. We compared the measured $β/γ$ energy spectra in three experimental conf…
▽ More
We report a study on the background of the Advanced Molybdenum-Based Rare process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb) of $^{100}$Mo. The pilot stage of the experiment was conducted using $\sim$1.9 kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea, from 2015 to 2018. We compared the measured $β/γ$ energy spectra in three experimental configurations with the results of Monte Carlo simulations and identified the background sources in each configuration. We replaced several detector components and enhanced the neutron shielding to lower the background level between configurations. A limit on the half-life of $0νββ$ decay of $^{100}$Mo was found at $T_{1/2}^{0ν} \ge 3.0\times 10^{23}$ years at 90\% confidence level, based on the measured background and its modeling. Further reduction of the background rate in the AMoRE-I and AMoRE-II are discussed.
△ Less
Submitted 7 April, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
Classifying Conjugacy Classes of Weyl Groups
Authors:
Dilpreet Kaur,
Uday Bhaskar Sharma
Abstract:
This paper concerns the enumeration of $z$-classes of Weyl groups of the types $B_n$, $C_n$, $D_n$, and the exceptional types $F_4$, $G_2$, $E_6$, $E_7$ and $E_8$. Through this work, we answer the question about $z$-classes in Weyl Groups, which Anupam and Sushil have asked in their survey tiled ``$z$-classes in groups: a survey.''
This paper concerns the enumeration of $z$-classes of Weyl groups of the types $B_n$, $C_n$, $D_n$, and the exceptional types $F_4$, $G_2$, $E_6$, $E_7$ and $E_8$. Through this work, we answer the question about $z$-classes in Weyl Groups, which Anupam and Sushil have asked in their survey tiled ``$z$-classes in groups: a survey.''
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Structural deformation and irreversible magnetic properties of flexible Co/Pt and Co/Pd thin films
Authors:
Esita Pandey,
Shaktiranjan Mohanty,
Abhisek Mishra,
Bhuvneshwari Sharma,
Subhankar Bedanta
Abstract:
The successful commercialization of flexible spintronic devices requires a complete understanding of the impact of external strain on the structural, electronic, and magnetic properties of a system. The impact of bending-induced strain on flexible films is studied quite well. However, little is known about the effect of other modes of flexibility, e.g., wrinkling, twisting, peeling, and stretching…
▽ More
The successful commercialization of flexible spintronic devices requires a complete understanding of the impact of external strain on the structural, electronic, and magnetic properties of a system. The impact of bending-induced strain on flexible films is studied quite well. However, little is known about the effect of other modes of flexibility, e.g., wrinkling, twisting, peeling, and stretching on the functional properties of flexible films. In this context, perpendicular magnetic anisotropic Co/Pt and Co/Pd thin films are prepared on flexible Kapton substrates, and the impact of the peeling mode is studied in detail. The peeling method generates numerous cracks, and buckling in the thin film, along with localized blister formation imaged by scanning electron microscopy. Further, the resistivity measurement confirms a significant enhancement in sample resistance owing to the severe damage of the films. The structural discontinuities strongly affect the magnetization reversal phenomena as measured by the magneto-optic Kerr effect (MOKE)-based microscopy. The bubble domains got converted to elongated-shaped domains due to several hindrances to the wall motion after strain application. Further, the relaxation measurements reveal that the thermal energy is insufficient to switch the magnetization at a few areas due to their high pinning potential associated with the damages. In contrast to bending-induced strain, here, all the modifications in the functional properties are found to be irreversible in nature.
△ Less
Submitted 31 December, 2023;
originally announced January 2024.
-
Higher order dynamical charge fluctuations in heavy-ion collisions
Authors:
Bhanu Sharma,
P. K. Sahu
Abstract:
The event-by-event charge fluctuation measurements are proposed to provide the signature of quark-gluon plasma (QGP) in heavy-ion collisions. Measure of dynamical charge fluctuations is expected to carry information of initial fractional charge of the QGP phase at the final state. We propose the higher order charge fluctuation measurement to study the QGP signal in heavy-ion collisions. This highe…
▽ More
The event-by-event charge fluctuation measurements are proposed to provide the signature of quark-gluon plasma (QGP) in heavy-ion collisions. Measure of dynamical charge fluctuations is expected to carry information of initial fractional charge of the QGP phase at the final state. We propose the higher order charge fluctuation measurement to study the QGP signal in heavy-ion collisions. This higher order charge fluctuation observable can amplify the signature of QGP. Also, the SMASH model is used to study the behavior of these observable in heavy-ion collisions at center of mass energies accessible in the STAR beam energy scan program.
△ Less
Submitted 6 December, 2023;
originally announced December 2023.
-
Volkov solutions for relativistic magnetized plasma in strong field quantum electrodynamics regime
Authors:
B. S. Sharma,
Garima Yadav,
R. C. Dhabhai,
N. K. Jaiman
Abstract:
This study shows the dynamics of relativistic electrons in terms of Dirac equation solutions when an ultra-intense short laser pulse of intensity $\ge 10^{23} {W.cm^{-2}}$ propagates through magnetized dense plasma ($B_0\approx {1MG})$. The interaction dynamics is analyzed near the strong-field quantum electrodynamics (SF-QED) regime. Our study finds new solutions in plasma media considering the e…
▽ More
This study shows the dynamics of relativistic electrons in terms of Dirac equation solutions when an ultra-intense short laser pulse of intensity $\ge 10^{23} {W.cm^{-2}}$ propagates through magnetized dense plasma ($B_0\approx {1MG})$. The interaction dynamics is analyzed near the strong-field quantum electrodynamics (SF-QED) regime. Our study finds new solutions in plasma media considering the effects of the re-normalized mass of relativistic electrons and the nonzero effective mass of accelerated photons. We have provided a general method for constructing exact solutions of the Dirac relativistic equation that correctly explains the dynamics of electrons in the strongly magnetized plasma medium. The modified solutions of the Dirac equation for one electron are derived and compared to the Volkov solutions. The new solutions are a basis for a feasible explanation of quantum attributes of relativistic electrons in a strong electromagnetic field of very short ultra-intense laser pulses with intensity near Schwinger field intensity. The solutions are called new Volkov solutions in a plasma medium. These solutions can be used to understand better the theory of quantum radiation reaction for the next-generation laser-plasma accelerator. Our results show that the Volkov solutions are not applicable in a magnetized plasma medium
△ Less
Submitted 1 December, 2023;
originally announced December 2023.
-
End-to-End Learning of Behavioural Inputs for Autonomous Driving in Dense Traffic
Authors:
Jatan Shrestha,
Simon Idoko,
Basant Sharma,
Arun Kumar Singh
Abstract:
Trajectory sampling in the Frenet(road-aligned) frame, is one of the most popular methods for motion planning of autonomous vehicles. It operates by sampling a set of behavioural inputs, such as lane offset and forward speed, before solving a trajectory optimization problem conditioned on the sampled inputs. The sampling is handcrafted based on simple heuristics, does not adapt to driving scenario…
▽ More
Trajectory sampling in the Frenet(road-aligned) frame, is one of the most popular methods for motion planning of autonomous vehicles. It operates by sampling a set of behavioural inputs, such as lane offset and forward speed, before solving a trajectory optimization problem conditioned on the sampled inputs. The sampling is handcrafted based on simple heuristics, does not adapt to driving scenarios, and is oblivious to the capabilities of downstream trajectory planners. In this paper, we propose an end-to-end learning of behavioural input distribution from expert demonstrations or in a self-supervised manner. Our core novelty lies in embedding a custom differentiable trajectory optimizer as a layer in neural networks, allowing us to update behavioural inputs by considering the optimizer's feedback. Moreover, our end-to-end approach also ensures that the learned behavioural inputs aid the convergence of the optimizer. We improve the state-of-the-art in the following aspects. First, we show that learned behavioural inputs substantially decrease collision rate while improving driving efficiency over handcrafted approaches. Second, our approach outperforms model predictive control methods based on sampling-based optimization.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Hilbert Space Embedding-based Trajectory Optimization for Multi-Modal Uncertain Obstacle Trajectory Prediction
Authors:
Basant Sharma,
Aditya Sharma,
K. Madhava Krishna,
Arun Kumar Singh
Abstract:
Safe autonomous driving critically depends on how well the ego-vehicle can predict the trajectories of neighboring vehicles. To this end, several trajectory prediction algorithms have been presented in the existing literature. Many of these approaches output a multi-modal distribution of obstacle trajectories instead of a single deterministic prediction to account for the underlying uncertainty. H…
▽ More
Safe autonomous driving critically depends on how well the ego-vehicle can predict the trajectories of neighboring vehicles. To this end, several trajectory prediction algorithms have been presented in the existing literature. Many of these approaches output a multi-modal distribution of obstacle trajectories instead of a single deterministic prediction to account for the underlying uncertainty. However, existing planners cannot handle the multi-modality based on just sample-level information of the predictions. With this motivation, this paper proposes a trajectory optimizer that can leverage the distributional aspects of the prediction in a computationally tractable and sample-efficient manner. Our optimizer can work with arbitrarily complex distributions and thus can be used with output distribution represented as a deep neural network. The core of our approach is built on embedding distribution in Reproducing Kernel Hilbert Space (RKHS), which we leverage in two ways. First, we propose an RKHS embedding approach to select probable samples from the obstacle trajectory distribution. Second, we rephrase chance-constrained optimization as distribution matching in RKHS and propose a novel sampling-based optimizer for its solution. We validate our approach with hand-crafted and neural network-based predictors trained on real-world datasets and show improvement over the existing stochastic optimization approaches in safety metrics.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Interaction of in-plane waves with a structured penetrable line defect in an elastic lattice
Authors:
M. J. Nieves,
B. L. Sharma
Abstract:
We consider the scattering of in-plane waves that interact with an edge of a structured {penetrable (inertial)} line defect contained in a triangular lattice, composed of periodically placed masses interconnected by massless elastic rods. The steady state problem for time-harmonic excitation is converted into a vector Wiener-Hopf equation using Fourier transform. The matrix Wiener-Hopf kernel of t…
▽ More
We consider the scattering of in-plane waves that interact with an edge of a structured {penetrable (inertial)} line defect contained in a triangular lattice, composed of periodically placed masses interconnected by massless elastic rods. The steady state problem for time-harmonic excitation is converted into a vector Wiener-Hopf equation using Fourier transform. The matrix Wiener-Hopf kernel of this equation describes all dynamic phenomena engaged in the scattering process, which includes instances where localised interfacial waves can emerge along structured defect. This information is exploited to identify the dependency of the existence of these waves on the incident wave parameters and properties of the inertial defect. The symmetry in the structure of scattering medium allows us to convert the vectorial problem into a pair of scalar Wiener-Hopf equations posed along the lattice row containing the defect. The solution embodies the exact representation of scattered field, in terms of a contour integral in the complex plane, that includes the contributions of evanescent and propagating waves. The solution reveals that in the remote lattice, the reflected and transmitted components of incident field are {accompanied by dynamic modes from three distinct symmetry classes in addition to localised interfacial waves}. These classes correspond to tensile modes acting transverse to the defected lattice row, shear modes that act parallel to this row, and wave modes represented as a mixture of these two responses. Benchmark finite element calculations are provided to validate results against the obtained semi-analytical solution, which involve numerical computations of the contour integrals. Graphical illustrations demonstrate special dynamic responses encountered during the wave scattering process, including dynamic anisotropy, negative reflection and negative refraction.
△ Less
Submitted 22 December, 2023; v1 submitted 17 September, 2023;
originally announced September 2023.
-
Scattering of surface waves by inhomogeneities in crystalline structures
Authors:
Basant Lal Sharma
Abstract:
In current scientific and technological scenario, studies of transmittance of surface waves across structured interfaces have gained some wind amidst applications to metasurfaces, electronic edge-waves, crystal grain boundaries, etc. The results presented in the present article shed a light on the influence of material inhomogeneities on propagation of surface waves. Within the framework of classi…
▽ More
In current scientific and technological scenario, studies of transmittance of surface waves across structured interfaces have gained some wind amidst applications to metasurfaces, electronic edge-waves, crystal grain boundaries, etc. The results presented in the present article shed a light on the influence of material inhomogeneities on propagation of surface waves. Within the framework of classical mechanics, an analog of Gurtin-Murdoch model is employed where elastic properties on surface are assumed to be distinct from bulk. Restricting to scalar waves on prototype square lattice half-plane, particles on considered structured surface have piecewise-constant mass and surface force-constants across an interfacial point. Particles in bulk lattice interact with nearest neighbours in a way that involves unequal force-constants parallel to surface versus normal to it. A surface wave band exists for such lattice structure wherein the waveform decays exponentially inside half-plane. A formula for surface wave transmittance is given based on an exact solution on half-plane, and, thus, previous work of Sharma & Eremeyev 2019 Int. J. Eng. Sci. 143, 33-38 is extended. An explicit expression for fraction of energy influx leaked via bulk waves is a highlight. Included are graphical results for several illustrative values of surface structure parameters.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
PRIEST: Projection Guided Sampling-Based Optimization For Autonomous Navigation
Authors:
Fatemeh Rastgar,
Houman Masnavi,
Basant Sharma,
Alvo Aabloo,
Jan Swevers,
Arun Kumar Singh
Abstract:
Efficient navigation in unknown and dynamic environments is crucial for expanding the application domain of mobile robots. The core challenge stems from the nonavailability of a feasible global path for guiding optimization-based local planners. As a result, existing local planners often get trapped in poor local minima. In this paper, we present a novel optimizer that can explore multiple homotop…
▽ More
Efficient navigation in unknown and dynamic environments is crucial for expanding the application domain of mobile robots. The core challenge stems from the nonavailability of a feasible global path for guiding optimization-based local planners. As a result, existing local planners often get trapped in poor local minima. In this paper, we present a novel optimizer that can explore multiple homotopies to plan high-quality trajectories over long horizons while still being fast enough for real-time applications. We build on the gradient-free paradigm by augmenting the trajectory sampling strategy with a projection optimization that guides the samples toward a feasible region. As a result, our approach can recover from the frequently encountered pathological cases wherein all the sampled trajectories lie in the high-cost region. Furthermore, we also show that our projection optimization has a highly parallelizable structure that can be easily accelerated over GPUs. We push the state-of-the-art in the following respects. Over the navigation stack of the Robot Operating System (ROS), we show an improvement of 7-13% in success rate and up to two times in total travel time metric. On the same benchmarks and metrics, our approach achieves up to 44% improvement over MPPI and its recent variants. On simple point-to-point navigation tasks, our optimizer is up to two times more reliable than SOTA gradient-based solvers, as well as sampling-based approaches such as the Cross-Entropy Method (CEM) and VPSTO. Codes: https://github.com/fatemeh-rastgar/PRIEST
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Effective dynamics in lattices with random mass perturbations
Authors:
Josselin Garnier,
Basant Lal Sharma
Abstract:
We consider a one-dimensional mono-atomic lattice with random perturbations of masses spread over a finite number of particles. Assuming Newtonian dynamics and linear nearest-neighbour interactions and allowing for a provision of pinning due to substrate interaction, we discuss a transient dynamics problem and a time-harmonic transmission problem. By a stochastic, multiscale analysis we provide as…
▽ More
We consider a one-dimensional mono-atomic lattice with random perturbations of masses spread over a finite number of particles. Assuming Newtonian dynamics and linear nearest-neighbour interactions and allowing for a provision of pinning due to substrate interaction, we discuss a transient dynamics problem and a time-harmonic transmission problem. By a stochastic, multiscale analysis we provide asymptotic expressions for the displacement field that propagates through the random perturbations and for the time-harmonic transmission coefficients. These theoretical predictions are supported by illustrations of their agreements with numerical simulations.
△ Less
Submitted 28 January, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Computational Modeling of Coupled Interactions of Fluid Membranes with Embedded Filaments
Authors:
Basant Lal Sharma,
Luigi E. Perotti,
Sanjay Dharmavaram
Abstract:
In this work, we present a computational formulation based on continuum mechanics to study the interaction of fluid membranes embedded with semiflexible filaments. This is motivated by systems in membrane biology, such as cytoskeletal networks and protein filaments aiding the cell fission process. We model the membrane as a fluid shell via the Helfrich-Canham energy and the filament as a one-dimen…
▽ More
In this work, we present a computational formulation based on continuum mechanics to study the interaction of fluid membranes embedded with semiflexible filaments. This is motivated by systems in membrane biology, such as cytoskeletal networks and protein filaments aiding the cell fission process. We model the membrane as a fluid shell via the Helfrich-Canham energy and the filament as a one-dimensional Cosserat continuum. We assume the filament to be tethered to the surface of the membrane in a way that it is allowed to float on the surface freely. The novel filament-membrane coupling, which is anticipated to yield interesting physics, also gives rise to unique computational challenges, which we address in this work. We present validation results and apply the formulation to certain problems inspired by cellular biology.
△ Less
Submitted 23 August, 2023;
originally announced August 2023.
-
Phase recovery from phaseless scattering data for discrete Schrödinger operators
Authors:
Roman Novikov,
Basant Lal Sharma
Abstract:
We consider scattering for the discrete Schrödinger operator on the square lattice $\mathbb{Z}^d$, $d \ge 1$, with compactly supported potential. We give formulas for finding the phased scattering amplitude from phaseless near-field scattering data.
We consider scattering for the discrete Schrödinger operator on the square lattice $\mathbb{Z}^d$, $d \ge 1$, with compactly supported potential. We give formulas for finding the phased scattering amplitude from phaseless near-field scattering data.
△ Less
Submitted 14 March, 2024; v1 submitted 12 July, 2023;
originally announced July 2023.
-
Simultaneous study of scattering and fusion hindrance near Coulomb barrier in $F+Pb$ systems
Authors:
Kamala Kanta Jena,
Bidhubhusan Sahu,
Jajati K. Nayak,
Raj Preethi P,
B. K. Sharma,
Santosh Kumar Agarwalla
Abstract:
A phenomenological optical potential is used to study the elastic angular distributions for the system $^{19}F+^{208}Pb$ close to the Coulomb barrier. This potential is constructed by taking into account the flexible potential developed by Ginocchio. The fluctuations in the real and imaginary parts of the optical model potential follow the trends of the threshold anomaly. The set of optical potent…
▽ More
A phenomenological optical potential is used to study the elastic angular distributions for the system $^{19}F+^{208}Pb$ close to the Coulomb barrier. This potential is constructed by taking into account the flexible potential developed by Ginocchio. The fluctuations in the real and imaginary parts of the optical model potential follow the trends of the threshold anomaly. The set of optical potential parameters needed to analyze the fusion cross sections of the same system are obtained through analysis of the scattering cross sections. Theoretical fusion cross-sections and results from four different experimental groups well agree for a range of energies. Several Fluorine (F) isotopes are used as projectiles in this study of fusion cross-sections by slightly altering the radial parameter. It was found that the fusion process occurs unfettered in the $^{19}F +^{208}Pb$ system below the Coulomb barrier but is seriously hindered in the case of its isotopic projectiles.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Improving Factuality of Abstractive Summarization via Contrastive Reward Learning
Authors:
I-Chun Chern,
Zhiruo Wang,
Sanjan Das,
Bhavuk Sharma,
Pengfei Liu,
Graham Neubig
Abstract:
Modern abstractive summarization models often generate summaries that contain hallucinated or contradictory information. In this paper, we propose a simple but effective contrastive learning framework that incorporates recent developments in reward learning and factuality metrics. Empirical studies demonstrate that the proposed framework enables summarization models to learn from feedback of factu…
▽ More
Modern abstractive summarization models often generate summaries that contain hallucinated or contradictory information. In this paper, we propose a simple but effective contrastive learning framework that incorporates recent developments in reward learning and factuality metrics. Empirical studies demonstrate that the proposed framework enables summarization models to learn from feedback of factuality metrics using contrastive reward learning, leading to more factual summaries by human evaluations. This suggests that further advances in learning and evaluation algorithms can feed directly into providing more factual summaries.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
Weisfeiler-Lehman Graph Kernel Method: A New Approach to Weak Chemical Tagging
Authors:
Yuan-Sen Ting,
Bhavesh Sharma
Abstract:
Stars' chemical signatures provide invaluable insights into stellar cluster formation. This study utilized the Weisfeiler-Lehman (WL) Graph Kernel to examine a 15-dimensional elemental abundance space. Through simulating chemical distributions using normalizing flows, the effectiveness of our algorithm was affirmed. The results highlight the capability of the WL algorithm, coupled with Gaussian Pr…
▽ More
Stars' chemical signatures provide invaluable insights into stellar cluster formation. This study utilized the Weisfeiler-Lehman (WL) Graph Kernel to examine a 15-dimensional elemental abundance space. Through simulating chemical distributions using normalizing flows, the effectiveness of our algorithm was affirmed. The results highlight the capability of the WL algorithm, coupled with Gaussian Process Regression, to identify patterns within elemental abundance point clouds correlated with various cluster mass functions. Notably, the WL algorithm exhibits superior interpretability, efficacy and robustness compared to deep sets and graph convolutional neural networks and enables optimal training with significantly fewer simulations (O(10)), a reduction of at least two orders of magnitude relative to graph neural networks.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
UAP-BEV: Uncertainty Aware Planning using Bird's Eye View generated from Surround Monocular Images
Authors:
Vikrant Dewangan,
Basant Sharma,
Tushar Choudhary,
Sarthak Sharma,
Aakash Aanegola,
Arun K. Singh,
K. Madhava Krishna
Abstract:
Autonomous driving requires accurate reasoning of the location of objects from raw sensor data. Recent end-to-end learning methods go from raw sensor data to a trajectory output via Bird's Eye View(BEV) segmentation as an interpretable intermediate representation. Motion planning over cost maps generated via Birds Eye View (BEV) segmentation has emerged as a prominent approach in autonomous drivin…
▽ More
Autonomous driving requires accurate reasoning of the location of objects from raw sensor data. Recent end-to-end learning methods go from raw sensor data to a trajectory output via Bird's Eye View(BEV) segmentation as an interpretable intermediate representation. Motion planning over cost maps generated via Birds Eye View (BEV) segmentation has emerged as a prominent approach in autonomous driving. However, the current approaches have two critical gaps. First, the optimization process is simplistic and involves just evaluating a fixed set of trajectories over the cost map. The trajectory samples are not adapted based on their associated cost values. Second, the existing cost maps do not account for the uncertainty in the cost maps that can arise due to noise in RGB images, and BEV annotations. As a result, these approaches can struggle in challenging scenarios where there is abrupt cut-in, stopping, overtaking, merging, etc from the neighboring vehicles.
In this paper, we propose UAP-BEV: A novel approach that models the noise in Spatio-Temporal BEV predictions to create an uncertainty-aware occupancy grid map. Using queries of the distance to the closest occupied cell, we obtain a sample estimate of the collision probability of the ego-vehicle. Subsequently, our approach uses gradient-free sampling-based optimization to compute low-cost trajectories over the cost map. Importantly, the sampling distribution is adapted based on the optimal cost values of the sampled trajectories. By explicitly modeling probabilistic collision avoidance in the BEV space, our approach is able to outperform the cost-map-based baselines in collision avoidance, route completion, time to completion, and smoothness. To further validate our method, we also show results on the real-world dataset NuScenes, where we report improvements in collision avoidance and smoothness.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
Multi-Task Training with In-Domain Language Models for Diagnostic Reasoning
Authors:
Brihat Sharma,
Yanjun Gao,
Timothy Miller,
Matthew M. Churpek,
Majid Afshar,
Dmitriy Dligach
Abstract:
Generative artificial intelligence (AI) is a promising direction for augmenting clinical diagnostic decision support and reducing diagnostic errors, a leading contributor to medical errors. To further the development of clinical AI systems, the Diagnostic Reasoning Benchmark (DR.BENCH) was introduced as a comprehensive generative AI framework, comprised of six tasks representing key components in…
▽ More
Generative artificial intelligence (AI) is a promising direction for augmenting clinical diagnostic decision support and reducing diagnostic errors, a leading contributor to medical errors. To further the development of clinical AI systems, the Diagnostic Reasoning Benchmark (DR.BENCH) was introduced as a comprehensive generative AI framework, comprised of six tasks representing key components in clinical reasoning. We present a comparative analysis of in-domain versus out-of-domain language models as well as multi-task versus single task training with a focus on the problem summarization task in DR.BENCH (Gao et al., 2023). We demonstrate that a multi-task, clinically trained language model outperforms its general domain counterpart by a large margin, establishing a new state-of-the-art performance, with a ROUGE-L score of 28.55. This research underscores the value of domain-specific training for optimizing clinical diagnostic reasoning tasks.
△ Less
Submitted 13 June, 2023; v1 submitted 7 June, 2023;
originally announced June 2023.
-
Generalizing Parametrization Invariance in the Calculus of Variations
Authors:
Sanjay Dharmavaram,
Basant Lal Sharma
Abstract:
We revisit the notion of parametrization invariance while introducing certain weakened notions of invariance in the calculus of variations. In this work, we employ a straightforward approach in the classical setting and mostly restrict attention to functionals on one-dimensional domains. We establish a connection between parametrization invariant functionals and functionals embodying a weaker noti…
▽ More
We revisit the notion of parametrization invariance while introducing certain weakened notions of invariance in the calculus of variations. In this work, we employ a straightforward approach in the classical setting and mostly restrict attention to functionals on one-dimensional domains. We establish a connection between parametrization invariant functionals and functionals embodying a weaker notion of invariance of their Lagrangian; we term this notion as T-Lagrangian analogous to the well-known idea of null Lagrangian. However, the Euler-Lagrange operator of a T-Lagrangian vanishes only along the tangential direction in the configuration space. On one-dimensional domain and for first- and second-order theories, we show that functional described by such a Lagrangian is necessarily a parametrization invariant functional modulo null Lagrangian. Keeping the motivation for partial differential equations, we also introduce and explore the notion of N-Lagrangian, with an invariance complementary to the case of T-Lagrangian, whose Euler-Lagrange operator vanishes along normal directions. We find that in a one-dimensional setting, every N-Lagrangian is simply a null Lagrangian.
△ Less
Submitted 27 May, 2023;
originally announced May 2023.
-
Temperature Evolution of Domains and Intradomain Chirality in 1T-TaS$_{2}$
Authors:
Boning Yu,
Ghilles Ainouche,
Manoj Singh,
Bishnu Sharma,
James Huber,
Michael C. Boyer
Abstract:
We use scanning tunneling microscopy to study the temperature evolution of the atomic-scale properties of the nearly-commensurate charge density wave (NC-CDW) state of the low-dimensional material, 1T-TaS$_2$. Our measurements at 203 K, 300 K, and 354 K, roughly spanning the temperature range of the NC-CDW state, show that while the average CDW periodicity is temperature independent, domaining and…
▽ More
We use scanning tunneling microscopy to study the temperature evolution of the atomic-scale properties of the nearly-commensurate charge density wave (NC-CDW) state of the low-dimensional material, 1T-TaS$_2$. Our measurements at 203 K, 300 K, and 354 K, roughly spanning the temperature range of the NC-CDW state, show that while the average CDW periodicity is temperature independent, domaining and the local evolution of the CDW lattice within a domain is temperature dependent. Further, we characterize the temperature evolution of the displacement field associated with the recently-discovered intradomain chirality of the NC-CDW state by calculating the local rotation vector. Intradomain chirality throughout the NC-CDW phase is likely driven by a strong coupling of the CDW lattice to the atomic lattice.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
A brief introduction to bulk viscosity of fluids
Authors:
Bhanuday Sharma,
Rakesh Kumar
Abstract:
Fluid flows are typically studied by solving the Navier--Stokes equation. One of the fundamental assumptions of this equation is Stokes' hypothesis. This hypothesis assumes bulk viscosity, to be identically zero. The Stokes' hypothesis is a reasonable approximation for commonly observed fluid flows; therefore, Navier--Stokes equation gives satisfactory results in these situations. However, there a…
▽ More
Fluid flows are typically studied by solving the Navier--Stokes equation. One of the fundamental assumptions of this equation is Stokes' hypothesis. This hypothesis assumes bulk viscosity, to be identically zero. The Stokes' hypothesis is a reasonable approximation for commonly observed fluid flows; therefore, Navier--Stokes equation gives satisfactory results in these situations. However, there are circumstances where this hypothesis does not hold good, and therefore, the classical Navier--Stokes equation becomes inapt. These situations include the absorption of sound waves, hypersonic flows, turbulent flows, and flow of Martian air etc. Reliable analytical and computational studies of these flows requires account of bulk viscosity in the governing equations. In this article, we provide a brief review of the subject of bulk viscosity. We start with a brief background of this topic. Then we discuss the underlying microscopic mechanisms that give rise to bulk viscosity effects. It was followed by a review of methods available in the literature for estimation of this parameter. Finally, a review of the studies that analyze the effects of bulk viscosity in various fluid flows is provided.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
A new method to identify elastic wave propagation mode and polarized bandgaps in periodic solid media
Authors:
Maria Jose Carrillo Munoz,
Bhisham Sharma
Abstract:
We present a new computational method for the accurate identification of the propagation modes and polarizations of elastic waves propagating in periodic solid structures and metamaterials. The method uses the eigenvectors calculated at each propagating wave solution eigenfrequency to identify the contribution of each translational and rotational component of the total mass in motion. We use this…
▽ More
We present a new computational method for the accurate identification of the propagation modes and polarizations of elastic waves propagating in periodic solid structures and metamaterials. The method uses the eigenvectors calculated at each propagating wave solution eigenfrequency to identify the contribution of each translational and rotational component of the total mass in motion. We use this information to identify the dominant wave propagation mode by defining a relative effective modal mass vector. Further, we associate each wave solution with its correct polarization by defining a new polarization factor that quantifies the relative orientation between the wave propagation and lattice motion directions and provides a positive numerical value between 0 (pure S-wave) and 1 (pure P-wave). Further, we suggest a graphical representational scheme for an easier visualization of the wave polarization within traditional dispersion plots. The method is validated by comparing our predictions against previously published results for various elastodynamic problems. Finally, we use the proposed method to analyze the effect of various lattice and structural parameter perturbations on the elastic wave propagation and bandgap behavior of a square planar beam lattice and show the emergence of previously unobserved dynamic characteristics, including various polarized bandgaps, fluid-like behavior, and ultralow-frequency SH- and SV-bandgaps that extend to 0 Hz. The proposed method provides an alternative computational approach to the typically employed visual mode inspection technique and provides a robust technique for analyzing the elastic wave response of periodic solid media.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Effectiveness of Text, Acoustic, and Lattice-based representations in Spoken Language Understanding tasks
Authors:
Esaú Villatoro-Tello,
Srikanth Madikeri,
Juan Zuluaga-Gomez,
Bidisha Sharma,
Seyyed Saeed Sarfjoo,
Iuliia Nigmatulina,
Petr Motlicek,
Alexei V. Ivanov,
Aravind Ganapathiraju
Abstract:
In this paper, we perform an exhaustive evaluation of different representations to address the intent classification problem in a Spoken Language Understanding (SLU) setup. We benchmark three types of systems to perform the SLU intent detection task: 1) text-based, 2) lattice-based, and a novel 3) multimodal approach. Our work provides a comprehensive analysis of what could be the achievable perfo…
▽ More
In this paper, we perform an exhaustive evaluation of different representations to address the intent classification problem in a Spoken Language Understanding (SLU) setup. We benchmark three types of systems to perform the SLU intent detection task: 1) text-based, 2) lattice-based, and a novel 3) multimodal approach. Our work provides a comprehensive analysis of what could be the achievable performance of different state-of-the-art SLU systems under different circumstances, e.g., automatically- vs. manually-generated transcripts. We evaluate the systems on the publicly available SLURP spoken language resource corpus. Our results indicate that using richer forms of Automatic Speech Recognition (ASR) outputs, namely word-consensus-networks, allows the SLU system to improve in comparison to the 1-best setup (5.5% relative improvement). However, crossmodal approaches, i.e., learning from acoustic and text embeddings, obtains performance similar to the oracle setup, a relative improvement of 17.8% over the 1-best configuration, being a recommended alternative to overcome the limitations of working with automatically generated transcripts.
△ Less
Submitted 17 March, 2023; v1 submitted 16 December, 2022;
originally announced December 2022.
-
Effect of the $σ$-cut potential on the properties of neutron stars with or without a hyperonic core
Authors:
N. K. Patra,
B. K. Sharma,
A. Reghunath,
A. K. H. Das,
T. K. Jha
Abstract:
Motivated by the recent observation of high-mass pulsars ($M \simeq 2 M_{\odot}$), we employ the $σ$-cut potential on the equation of state (EOS) of high-density matter and the properties of neutron stars within the relativistic mean-field (RMF) model using TM1$^{*}$ parameter set. The $σ$-cut potential is known to reduce the contributions of the $σ$ field, resulting in a stiffer EOS at high densi…
▽ More
Motivated by the recent observation of high-mass pulsars ($M \simeq 2 M_{\odot}$), we employ the $σ$-cut potential on the equation of state (EOS) of high-density matter and the properties of neutron stars within the relativistic mean-field (RMF) model using TM1$^{*}$ parameter set. The $σ$-cut potential is known to reduce the contributions of the $σ$ field, resulting in a stiffer EOS at high densities and hence leading to larger neutron star masses without affecting the properties of nuclear matter at normal saturation density. We also analyzed the effect of the same on pure neutron matter and also on the neutron star matter with and without hyperonic core and compared it with the available theoretical, experimental, and observational data. The corresponding tidal deformability ($Λ_{1.4}$) is also calculated. With the choice of meson-hyperon coupling fixed to hypernuclear potentials, we obtain $\approx 10~\%$ increase in mass by employing the $σ$-cut potential for $f_{s} = 0.6$. Our results are in good agreement with various experimental constraints and observational data, particularly with the GW170817 data.
△ Less
Submitted 19 November, 2022;
originally announced November 2022.
-
Data Converter Design Space Exploration for IoT Applications: An Overview of Challenges and Future Directions
Authors:
Buddhi Prakash Sharma,
Anu Gupta,
Chandra Shekhar
Abstract:
Human lives are improving with the widespread use of cutting-edge digital technology like the Internet of Things (IoT). Recently, the pandemic has shown the demand for more digitally advanced IoT-based devices. International Data Corporation (IDC) forecasts that by 2025, there will be approximately 42 billion of these devices in use, capable of producing around 80 ZB (zettabytes) of data. So data…
▽ More
Human lives are improving with the widespread use of cutting-edge digital technology like the Internet of Things (IoT). Recently, the pandemic has shown the demand for more digitally advanced IoT-based devices. International Data Corporation (IDC) forecasts that by 2025, there will be approximately 42 billion of these devices in use, capable of producing around 80 ZB (zettabytes) of data. So data acquisition, processing, communication, and visualization are necessary from a functional standpoint. Indicating sensors & data converters are the key components for IoT-based applications. The efficiency of such applications is truly measured in terms of latency, power, and resolution of data converters motivating designers to perform efficiently. Sensors capture and covert physical features from their chosen environment into detectable quantities. Data converter gives meaningful information and connects the real analog world to the digital component of the devices. The received data is interpreted and analyzed with the digital processing circuitry. Ultimately, it is used as information by a network of internet-connected smart devices. Because IoT technologies are adaptable to nearly any technology that may provide its operational activity and environmental conditions. But the challenges occur with power consumption as the complete IoT framework is battery operated and replacing a battery is a daunting task. So the goal of this chapter is to unveil the requirements to design energy-efficient data converters for IoT applications.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
DR.BENCH: Diagnostic Reasoning Benchmark for Clinical Natural Language Processing
Authors:
Yanjun Gao,
Dmitriy Dligach,
Timothy Miller,
John Caskey,
Brihat Sharma,
Matthew M Churpek,
Majid Afshar
Abstract:
The meaningful use of electronic health records (EHR) continues to progress in the digital era with clinical decision support systems augmented by artificial intelligence. A priority in improving provider experience is to overcome information overload and reduce the cognitive burden so fewer medical errors and cognitive biases are introduced during patient care. One major type of medical error is…
▽ More
The meaningful use of electronic health records (EHR) continues to progress in the digital era with clinical decision support systems augmented by artificial intelligence. A priority in improving provider experience is to overcome information overload and reduce the cognitive burden so fewer medical errors and cognitive biases are introduced during patient care. One major type of medical error is diagnostic error due to systematic or predictable errors in judgment that rely on heuristics. The potential for clinical natural language processing (cNLP) to model diagnostic reasoning in humans with forward reasoning from data to diagnosis and potentially reduce the cognitive burden and medical error has not been investigated. Existing tasks to advance the science in cNLP have largely focused on information extraction and named entity recognition through classification tasks. We introduce a novel suite of tasks coined as Diagnostic Reasoning Benchmarks, DR.BENCH, as a new benchmark for developing and evaluating cNLP models with clinical diagnostic reasoning ability. The suite includes six tasks from ten publicly available datasets addressing clinical text understanding, medical knowledge reasoning, and diagnosis generation. DR.BENCH is the first clinical suite of tasks designed to be a natural language generation framework to evaluate pre-trained language models. Experiments with state-of-the-art pre-trained generative language models using large general domain models and models that were continually trained on a medical corpus demonstrate opportunities for improvement when evaluated in DR. BENCH. We share DR. BENCH as a publicly available GitLab repository with a systematic approach to load and evaluate models for the cNLP community.
△ Less
Submitted 13 December, 2022; v1 submitted 29 September, 2022;
originally announced September 2022.
-
Machine Learning-based Automatic Annotation and Detection of COVID-19 Fake News
Authors:
Mohammad Majid Akhtar,
Bibhas Sharma,
Ishan Karunanayake,
Rahat Masood,
Muhammad Ikram,
Salil S. Kanhere
Abstract:
COVID-19 impacted every part of the world, although the misinformation about the outbreak traveled faster than the virus. Misinformation spread through online social networks (OSN) often misled people from following correct medical practices. In particular, OSN bots have been a primary source of disseminating false information and initiating cyber propaganda. Existing work neglects the presence of…
▽ More
COVID-19 impacted every part of the world, although the misinformation about the outbreak traveled faster than the virus. Misinformation spread through online social networks (OSN) often misled people from following correct medical practices. In particular, OSN bots have been a primary source of disseminating false information and initiating cyber propaganda. Existing work neglects the presence of bots that act as a catalyst in the spread and focuses on fake news detection in 'articles shared in posts' rather than the post (textual) content. Most work on misinformation detection uses manually labeled datasets that are hard to scale for building their predictive models. In this research, we overcome this challenge of data scarcity by proposing an automated approach for labeling data using verified fact-checked statements on a Twitter dataset. In addition, we combine textual features with user-level features (such as followers count and friends count) and tweet-level features (such as number of mentions, hashtags and urls in a tweet) to act as additional indicators to detect misinformation. Moreover, we analyzed the presence of bots in tweets and show that bots change their behavior over time and are most active during the misinformation campaign. We collected 10.22 Million COVID-19 related tweets and used our annotation model to build an extensive and original ground truth dataset for classification purposes. We utilize various machine learning models to accurately detect misinformation and our best classification model achieves precision (82%), recall (96%), and false positive rate (3.58%). Also, our bot analysis indicates that bots generated approximately 10% of misinformation tweets. Our methodology results in substantial exposure of false information, thus improving the trustworthiness of information disseminated through social media platforms.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
Petascale Brownian dynamics simulations of highly resolved polymer chains with hydrodynamic interactions using modern GPUs
Authors:
Venkata Siva Krishna,
Praphul Kumar,
Bharatkumar Sharma,
Indranil Saha Dalal
Abstract:
Brownian dynamics simulations of fairly long, highly detailed polymer chains, at the resolution of a single Kuhn step, remains computationally prohibitive even on the modern processors. This is especially true when the beads on the chain experience hydrodynamic interactions (HI), which requires the usage of methods like Cholesky decomposition of large matrices at every timestep. In this study, we…
▽ More
Brownian dynamics simulations of fairly long, highly detailed polymer chains, at the resolution of a single Kuhn step, remains computationally prohibitive even on the modern processors. This is especially true when the beads on the chain experience hydrodynamic interactions (HI), which requires the usage of methods like Cholesky decomposition of large matrices at every timestep. In this study, we perform Petascale BD simulations, with HI, of fairly long and highly resolved polymer chains on modern GPUs. Our results clearly highlight the inadequacies of the typical models that use beads connected by springs. In this manuscript, firstly, we present the details of a highly scalable, parallel hybrid code implemented on a GPU for BD simulations of chains resolved to a single Kuhn step. In this hybrid code using CUDA and MPI, we have incorporated HI using the Cholesky decomposition method. Next, we validate the GPU implementation extensively with theoretical expectations for polymer chains at equilibrium and in flow with results in the absence of HI. Further, our results in flow with HI show significantly different temporal variations of stretch, in both startup extensional and shear flows, relative to the conventional bead-spring models. In all cases investigated, the ensemble averaged chain stretch is much lower than bead-spring predictions. Also, quite remarkably, our GPU implementation shows a scaling of $\sim$$N^{1.2}$ and $\sim$$N^{2.2}$ of the computational times for shorter and longer chains in the most modern available GPU, respectively, which is significantly lower than the theoretically expected $\sim$$N^{3}$. We expect our methods and results to pave the way for further analysis of polymer physics in flow fields, with long and highly detailed chain models.
△ Less
Submitted 12 August, 2022;
originally announced August 2022.
-
Interference and Need Aware Workload Colocation in Hyperscale Datacenters
Authors:
Sayak Chakraborti,
Brian Coutinho,
Sandhya Dwarkadas,
Parth Malani,
Bikash Sharma
Abstract:
Datacenters suffer from resource utilization inefficiencies due to the conflicting goals of service owners and platform providers. Service owners intending to maintain Service Level Objectives (SLO) for themselves typically request a conservative amount of resources. Platform providers want to increase operational efficiency to reduce capital and operating costs. Achieving both operational efficie…
▽ More
Datacenters suffer from resource utilization inefficiencies due to the conflicting goals of service owners and platform providers. Service owners intending to maintain Service Level Objectives (SLO) for themselves typically request a conservative amount of resources. Platform providers want to increase operational efficiency to reduce capital and operating costs. Achieving both operational efficiency and SLO for individual services at the same time is challenging due to the diversity in service workload characteristics, resource usage patterns that are dependent on input load, heterogeneity in platform, memory, I/O, and network architecture, and resource bundling.
This paper presents a tunable approach to resource allocation that accounts for both dynamic service resource needs and platform heterogeneity. In addition, an online K-Means-based service classification method is used in conjunction with an offline sensitivity component. Our tunable approach allows trading resource utilization efficiency for absolute SLO guarantees based on the service owners' sensitivity to its SLO. We evaluate our tunable resource allocator at scale in a private cloud environment with mostly latency-critical workloads. When tuning for operational efficiency, we demonstrate up to ~50% reduction in required machines; ~40% reduction in Total-Cost-of-Ownership (TCO); and ~60% reduction in CPU and memory fragmentation, but at the cost of increasing the number of tasks experiencing degradation of SLO by up to ~25% compared to the baseline. When tuning for SLO, by introducing interference-aware colocation, we can tune the solver to reduce tasks experiencing degradation of SLO by up to ~22% compared to the baseline, but at an additional cost of ~30% in terms of the number of hosts. We highlight this trade-off between TCO and SLO violations, and offer tuning based on the requirements of the platform owners.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Bulk viscosity of dilute gases and their mixtures
Authors:
Bhanuday Sharma,
Rakesh Kumar,
Savitha Pareek
Abstract:
In this work, we use the Green-Kubo method to study the bulk viscosity of various dilute gases and their mixtures. First, we study the effects of the atomic mass on the bulk viscosity of dilute diatomic gas by estimating the bulk viscosity of four different isotopes of nitrogen gas. We then study the effects of addition of noble gas on the bulk viscosity of dilute nitrogen gas. We consider mixture…
▽ More
In this work, we use the Green-Kubo method to study the bulk viscosity of various dilute gases and their mixtures. First, we study the effects of the atomic mass on the bulk viscosity of dilute diatomic gas by estimating the bulk viscosity of four different isotopes of nitrogen gas. We then study the effects of addition of noble gas on the bulk viscosity of dilute nitrogen gas. We consider mixtures of nitrogen with three noble gases, viz., neon, argon, and krypton at eight different compositions between pure nitrogen to pure noble gas. It is followed by an estimation of bulk viscosity of pure oxygen and mixtures of nitrogen and oxygen for various compositions. In this case, three different composition are considered, viz., 25\% N$_2$ + 75\% O$_2$, 50\% N$_2$ + 50\% O$_2$, and 78\% N$_2$ + 22\% O$_2$. The last composition is aimed to represent the dry air. A brief review of works that study the effects of incorporation of bulk viscosity in analysis of various flow situations has also been provided.
△ Less
Submitted 10 July, 2022;
originally announced July 2022.
-
Bulk viscosity of dilute monatomic gases
Authors:
Bhanuday Sharma,
Rakesh Kumar,
Savitha Pareek,
Ashish Singh
Abstract:
Extensive research has been carried out in the past to estimate the bulk viscosity of dense monatomic fluids; however, little attention has been paid to estimate the same in the dilute gas regime. In this work, we perform precise Green-Kubo calculations in molecular dynamics simulations to estimate the bulk viscosity of dilute argon gas. The investigated temperature and pressure range is 300 to 75…
▽ More
Extensive research has been carried out in the past to estimate the bulk viscosity of dense monatomic fluids; however, little attention has been paid to estimate the same in the dilute gas regime. In this work, we perform precise Green-Kubo calculations in molecular dynamics simulations to estimate the bulk viscosity of dilute argon gas. The investigated temperature and pressure range is 300 to 750 K and 0.5 to 1.5 bar respectively. It is observed that the estimated bulk viscosity is $O(10^{-10})$ Pa s, which is several orders of magnitude smaller than that of other diatomic and polyatomic gases, but nonetheless, not an absolute zero as typically assumed. It implies that Stokes' hypothesis is true for dilute monatomic gases only in an approximate rather than absolute sense. The variation of bulk viscosity with pressures at constant temperatures has also been studied and is found to be of quadratic nature. The obtained bulk viscosity values are also reported in the reduced Lennard-Jones units to enable extension of the present results to other noble gases as well. It has also been observed that the bulk viscosity of Lennard-Jones monatomic gases becomes temperature independent at very low densities.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Prandtl number effects on the hydrodynamic stability of compressible boundary layers: flow-thermodynamic interactions
Authors:
Bajrang Sharma,
Sharath S. Girimaji
Abstract:
Hydrodynamic stability of compressible boundary layers is strongly influenced by Mach number ($M$), Prandtl number ($Pr$) and thermal wall boundary condition. These effects manifest on the flow stability via the flow-thermodynamic interactions. Comprehensive understanding of stability flow physics is of fundamental interest and important for developing predictive tools and closure models for integ…
▽ More
Hydrodynamic stability of compressible boundary layers is strongly influenced by Mach number ($M$), Prandtl number ($Pr$) and thermal wall boundary condition. These effects manifest on the flow stability via the flow-thermodynamic interactions. Comprehensive understanding of stability flow physics is of fundamental interest and important for developing predictive tools and closure models for integrated transition-to-turbulence computations. The flow-thermodynamic interactions are examined using linear analysis and direct numerical simulations (DNS) in the following parameter regime: $0.5 \leq M \leq 8$; and, $0.5 \leq Pr \leq 1.3$. For adiabatic wall boundary condition, increasing Prandtl number has a destabilizing effect. In this work, we characterize the behavior of production, pressure-strain correlation and pressure-dilatation as functions of Mach and Prandtl numbers. First and second instability modes exhibit similar stability trends but the underlying flow physics is shown to be diametrically opposite. The Prandtl-number influence on instability is explicated in terms of the base flow profile with respect to the different perturbation mode shapes.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
GITz: Graphene-assisted IRS Design for THz Communication
Authors:
Bhupendra Sharma,
Anirudh Agarwal,
Deepak Mishra,
Soumitra Debnath
Abstract:
Graphene-based intelligent reflecting surface (GIRS) has been proved to provide a promising propagation environment to enhance the quality of high frequency terahertz (THz) wireless communication. In this paper, we characterize GIRS for THz communication (GITz) using material specific parameters of graphene to tune the reflection of the incident wave at IRS. In particular, we propose a GITz design…
▽ More
Graphene-based intelligent reflecting surface (GIRS) has been proved to provide a promising propagation environment to enhance the quality of high frequency terahertz (THz) wireless communication. In this paper, we characterize GIRS for THz communication (GITz) using material specific parameters of graphene to tune the reflection of the incident wave at IRS. In particular, we propose a GITz design model considering the incident signal frequency material level parameters like conductivity, Fermi-level, patch width to control the reflection amplitude (RA) at the communication receiver. We have obtained the closed-form expression of RA for an accurate design and characterization of GIRS, which is incomplete in the existing research due to the inclusion of only phase-shift. The numerical simulation results demonstrate the effectiveness of the proposed characterization by providing key insights.
△ Less
Submitted 3 May, 2022;
originally announced May 2022.
-
Accurate Clinical Toxicity Prediction using Multi-task Deep Neural Nets and Contrastive Molecular Explanations
Authors:
Bhanushee Sharma,
Vijil Chenthamarakshan,
Amit Dhurandhar,
Shiranee Pereira,
James A. Hendler,
Jonathan S. Dordick,
Payel Das
Abstract:
Explainable ML for molecular toxicity prediction is a promising approach for efficient drug development and chemical safety. A predictive ML model of toxicity can reduce experimental cost and time while mitigating ethical concerns by significantly reducing animal and clinical testing. Herein, we use a deep learning framework for simultaneously modeling in vitro, in vivo, and clinical toxicity data…
▽ More
Explainable ML for molecular toxicity prediction is a promising approach for efficient drug development and chemical safety. A predictive ML model of toxicity can reduce experimental cost and time while mitigating ethical concerns by significantly reducing animal and clinical testing. Herein, we use a deep learning framework for simultaneously modeling in vitro, in vivo, and clinical toxicity data. Two different molecular input representations are used: Morgan fingerprints and pre-training SMILES embeddings. A multi-task deep learning model accurately predicts toxicity for all endpoints, including clinical, as indicated by AUROC and balanced accuracy. In particular, SMILES embeddings as input to the multi-task model improved clinical toxicity predictions compared to existing models in MoleculeNet benchmark. Additionally, our multi-task approach is comprehensive in the sense that it is comparable to state-of-the-art approaches for specific endpoints in in vitro, in vivo and clinical platforms. Through both the multi-task model and transfer learning, we were able to indicate the minimal need of in vivo data for clinical toxicity predictions. To provide confidence and explain the model's predictions, we adapt a post-hoc contrastive explanation method that returns pertinent positive and pertinent negative features, which correspond well to known mutagenic and reactive toxicophores, such as unsubstituted bonded heteroatoms, aromatic amines, and Michael receptors. Furthermore, toxicophore recovery by pertinent feature analysis captures more of the in vitro (53%) and in vivo (56%), rather than of the clinical (8%), endpoints, and indeed uncovers a preference in known toxicophore data towards in vitro and in vivo experimental data. To our knowledge, this is the first contrastive explanation, using both present and absent substructures, for predictions of clinical and in vivo molecular toxicity.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
Emergent dynamics in an astrocyte-neuronal network coupled via nitric oxide
Authors:
Bhanu Sharma,
Spandan Kumar,
Subhendu Ghosh,
Vikram Singh
Abstract:
In the brain, both neurons and glial cells work in conjunction with each other during information processing. Stimulation of neurons can cause calcium oscillations in astrocytes which in turn can affect neuronal calcium dynamics. The "glissandi" effect is one such phenomenon, associated with a decrease in infraslow fluctuations, in which synchronized calcium oscillations propagate as a wave in hun…
▽ More
In the brain, both neurons and glial cells work in conjunction with each other during information processing. Stimulation of neurons can cause calcium oscillations in astrocytes which in turn can affect neuronal calcium dynamics. The "glissandi" effect is one such phenomenon, associated with a decrease in infraslow fluctuations, in which synchronized calcium oscillations propagate as a wave in hundreds of astrocytes. Nitric oxide molecules released from the astrocytes contribute to synaptic functions on the basis of the underlying astrocyte-neuron interaction network. In this study, by defining an astrocyte-neuronal (A-N) unit as an integrated circuit of one neuron and one astrocyte, we developed a minimal model of neuronal stimulus-dependent and nitric oxide-mediated emergence of calcium waves in astrocytes. Incorporating inter-unit communication via nitric oxide molecules, a coupled network of 1,000 such A-N units is developed in which multiple stable regimes were found to emerge in astrocytes. We examined the ranges of neuronal stimulus strength and the coupling strength between A-N units that give rise to such dynamical behaviors. We also report that there exists a range of coupling strength, wherein units not receiving stimulus also start showing oscillations and become synchronized. Our results support the hypothesis that glissandi-like phenomena exhibiting synchronized calcium oscillations in astrocytes help in efficient synaptic transmission by reducing the energy demand of the process.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Scalable Multi-node Fast Fourier Transform on GPUs
Authors:
Manthan Verma,
Soumyadeep Chatterjee,
Gaurav Garg,
Bharatkumar Sharma,
Nishant Arya,
Shashi Kumar,
Anish Saxena,
Mahendra K. Verma
Abstract:
In this paper, we present the details of our multi-node GPU-FFT library, as well its scaling on Selene HPC system. Our library employs slab decomposition for data division and MPI for communication among GPUs. We performed GPU-FFT on $1024^3$, $2048^3$, and $4096^3$ grids using a maximum of 512 A100 GPUs. We observed good scaling for $4096^3$ grid with 64 to 512 GPUs. We report that the timings of…
▽ More
In this paper, we present the details of our multi-node GPU-FFT library, as well its scaling on Selene HPC system. Our library employs slab decomposition for data division and MPI for communication among GPUs. We performed GPU-FFT on $1024^3$, $2048^3$, and $4096^3$ grids using a maximum of 512 A100 GPUs. We observed good scaling for $4096^3$ grid with 64 to 512 GPUs. We report that the timings of multicore FFT of $1536^3$ grid with 196608 cores of Cray XC40 is comparable to that of GPU-FFT of $2048^3$ grid with 128 GPUs. The efficiency of GPU-FFT is due to the fast computation capabilities of A100 card and efficient communication via NVlink.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Don't be a Victim During a Pandemic! Analysing Security and Privacy Threats in Twitter During COVID-19
Authors:
Bibhas Sharma,
Ishan Karunanayake,
Rahat Masood,
Muhammad Ikram
Abstract:
There has been a huge spike in the usage of social media platforms during the COVID-19 lockdowns. These lockdown periods have resulted in a set of new cybercrimes, thereby allowing attackers to victimise social media users with a range of threats. This paper performs a large-scale study to investigate the impact of a pandemic and the lockdown periods on the security and privacy of social media use…
▽ More
There has been a huge spike in the usage of social media platforms during the COVID-19 lockdowns. These lockdown periods have resulted in a set of new cybercrimes, thereby allowing attackers to victimise social media users with a range of threats. This paper performs a large-scale study to investigate the impact of a pandemic and the lockdown periods on the security and privacy of social media users. We analyse 10.6 Million COVID-related tweets from 533 days of data crawling and investigate users' security and privacy behaviour in three different periods (i.e., before, during, and after the lockdown). Our study shows that users unintentionally share more personal identifiable information when writing about the pandemic situation (e.g., sharing nearby coronavirus testing locations) in their tweets. The privacy risk reaches 100% if a user posts three or more sensitive tweets about the pandemic. We investigate the number of suspicious domains shared on social media during different phases of the pandemic. Our analysis reveals an increase in the number of suspicious domains during the lockdown compared to other lockdown phases. We observe that IT, Search Engines, and Businesses are the top three categories that contain suspicious domains. Our analysis reveals that adversaries' strategies to instigate malicious activities change with the country's pandemic situation.
△ Less
Submitted 26 March, 2023; v1 submitted 21 February, 2022;
originally announced February 2022.
-
Physics-Informed Machine Learning and Uncertainty Quantification for Mechanics of Heterogeneous Materials
Authors:
B V S S Bharadwaja,
Mohammad Amin Nabian,
Bharatkumar Sharma,
Sanjay Choudhry,
Alankar Alankar
Abstract:
In this work, a model based on the Physics - Informed Neural Networks (PINNs) for solving elastic deformation of heterogeneous solids and associated Uncertainty Quantification (UQ) is presented. For the present study, the PINNs framework - Modulus developed by Nvidia is utilized, wherein we implement a module for mechanics of heterogeneous solids. We use PINNs to approximate momentum balance by as…
▽ More
In this work, a model based on the Physics - Informed Neural Networks (PINNs) for solving elastic deformation of heterogeneous solids and associated Uncertainty Quantification (UQ) is presented. For the present study, the PINNs framework - Modulus developed by Nvidia is utilized, wherein we implement a module for mechanics of heterogeneous solids. We use PINNs to approximate momentum balance by assuming isotropic linear elastic constitutive behavior against a loss function. Along with governing equations, the associated initial / boundary conditions also softly participate in the loss function. Solids where the heterogeneity manifests as voids (low elastic modulus regions) and fibers (high elastic modulus regions) in a matrix are analyzed, and the results are validated against solutions obtained from a commercial Finite Element (FE) analysis package. The present study also reveals that PINNs can capture the stress jumps precisely at the material interfaces. Additionally, the present study explores the advantages associated with the surrogate features in PINNs via the variation in geometry and material properties. The presented UQ studies suggest that the mean and standard deviation of the PINNs solution are in good agreement with Monte Carlo FE results. The effective Young's modulus predicted by PINNs for single representative void and single fiber composites compare very well against the ones predicted by FE, which establishes the PINNs formulation as an efficient homogenization tool.
△ Less
Submitted 22 February, 2022; v1 submitted 14 February, 2022;
originally announced February 2022.
-
How Grain Boundaries and Interfacial Electrostatic Interactions Modulate Water Desalination Via Nanoporous Hexagonal Boron Nitride
Authors:
Ananth Govind Rajan,
Bharat Bhushan Sharma
Abstract:
Researchers are currently exploring nanoporous two-dimensional materials, such as hexagonal boron nitride (hBN), as potential desalination membranes. Here, we study the effect of grain boundaries (GBs) and interfacial electrostatic interactions on the desalination performance of bicrystalline nanoporous hBN, using classical molecular dynamics simulations supported by quantum-mechanical density fun…
▽ More
Researchers are currently exploring nanoporous two-dimensional materials, such as hexagonal boron nitride (hBN), as potential desalination membranes. Here, we study the effect of grain boundaries (GBs) and interfacial electrostatic interactions on the desalination performance of bicrystalline nanoporous hBN, using classical molecular dynamics simulations supported by quantum-mechanical density functional theory (DFT) calculations. We investigate three different nanoporous bicrystalline hBN configurations, with symmetric tilt GBs having misorientation angles of 13.2°, 21.8°, and 32.2°. We find that grain boundaries alter the areas and shapes of nanopores in bicrystalline hBN, as compared to the nanopores in monocrystalline hBN. We observe that, although bicrystalline nanoporous hBN with a misorientation angle of 13.2° shows improved water flow rate by ~30%, it demonstrates reduced Na$^\mathrm{+}$ ion rejection by ~6%, as compared to monocrystalline hBN. We also uncover the role of the nanopore shape in water desalination, finding that more elongated pores with smaller sizes (in 21.8°- and 32.2°-misoriented bicrystalline hBN) can match the water permeation through less elongated pores of slightly larger sizes, with a concomitant ~3-4% drop in Na$^\mathrm{+}$ rejection. Simulations also predict that the water flow rate is significantly affected by interfacial electrostatic interactions. Indeed, the water flow rate is the highest when altered partial charges on B and N atoms were determined using DFT calculations, as compared to when no partial charges or bulk partial charges (i.e., charged hBN) were considered. Overall, our work on water/ion transport through nanopores in bicrystalline hBN indicates that the presence of GBs and surface charge can lead, respectively, to a drop in the ion rejection and water permeation performance of hBN membranes.
△ Less
Submitted 18 February, 2022; v1 submitted 9 January, 2022;
originally announced January 2022.