Showing 1–35 of 35 results for author: Stevens, M J

Absorption-Based, Passive Range Imaging from Hyperspectral Thermal Measurements

Authors: Unay Dorken Gallastegi, Hoover Rueda-Chacon, Martin J. Stevens, Vivek K Goyal

Abstract: Passive hyperspectral long-wave infrared measurements are remarkably informative about the surroundings, such as remote object material composition, temperature, and range; and air temperature and gas concentrations. Remote object material and temperature determine the spectrum of thermal radiance, and range, air temperature, and gas concentrations determine how this spectrum is modified by propag… ▽ More Passive hyperspectral long-wave infrared measurements are remarkably informative about the surroundings, such as remote object material composition, temperature, and range; and air temperature and gas concentrations. Remote object material and temperature determine the spectrum of thermal radiance, and range, air temperature, and gas concentrations determine how this spectrum is modified by propagation to the sensor. We computationally separate these phenomena, introducing a novel passive range imaging method based on atmospheric absorption of ambient thermal radiance. Previously demonstrated passive absorption-based ranging methods assume hot and highly emitting objects. However, the temperature variation in natural scenes is usually low, making range imaging challenging. Our method benefits from explicit consideration of air emission and parametric modeling of atmospheric absorption. To mitigate noise in low-contrast scenarios, we jointly estimate range and intrinsic object properties by exploiting a variety of absorption lines spread over the infrared spectrum. Along with Monte Carlo simulations that demonstrate the importance of regularization, temperature differentials, and availability of many spectral bands, we apply this method to long-wave infrared (8--13 $μ$m) hyperspectral image data acquired from natural scenes with no active illumination. Range features from 15m to 150m are recovered, with good qualitative match to unaligned lidar data. △ Less

Submitted 10 August, 2023; originally announced August 2023.

Comments: 15 pages, 14 figures

Building blocks of non-Euclidean ribbons: Size-controlled self-assembly via discrete, frustrated particles

Authors: Douglas M. Hall, Mark J. Stevens, Gregory M. Grason

Abstract: Geometric frustration offers a pathway to soft matter self-assembly with controllable finite sizes. While the understanding of frustration in soft matter assembly derives almost exclusively from continuum elastic descriptions, a current challenge is to understand the connection between microscopic physical properties of misfitting ``building blocks" and emergent assembly behavior at mesoscale. We… ▽ More Geometric frustration offers a pathway to soft matter self-assembly with controllable finite sizes. While the understanding of frustration in soft matter assembly derives almost exclusively from continuum elastic descriptions, a current challenge is to understand the connection between microscopic physical properties of misfitting ``building blocks" and emergent assembly behavior at mesoscale. We present and analyze a particle-based description of what is arguably the best studied example for frustrated soft matter assembly, negative-curvature ribbon assembly, observed in both assemblies of chiral surfactants and shape-frustrated nanoparticles. Based on our particle model, known as {\it saddle wedge monomers}, we numerically test the connection between microscopic shape and interactions of the misfitting subunits and the emergent behavior at the supra-particle scale, specifically focusing on the propagation and relaxation of inter-particle strains, the emergent role of extrinsic shape on frustrated ribbons and the equilibrium regime of finite width selection. Beyond the intuitive role of shape misfit, we show that self-limitation is critically dependent on the finite range of cohesive interactions, with larger size finite assemblies requiring increasing short-range interparticle forces. Additionally, we demonstrate that non-linearities arising from discrete particle interactions alter self-limiting behavior due to both strain-softening in shape-flattened assembly and partial yielding of highly strained bonds, which in turn may give rise to states of hierarchical, multidomain assembly. Tracing the regimes of frustration-limited assembly to the specific microscopic features of misfitting particle shapes and interactions provides necessary guidance for translating the theory of size-programmable assembly into design of intentionally-frustrated colloidal particles. △ Less

Submitted 15 October, 2022; originally announced October 2022.

Comments: 26 pages, 12 figures, 2 appendices

Journal ref: Soft Matter, 19, 858-881 (2023)

Hot-Band Absorption Can Mimic Entangled Two-Photon Absorption

Authors: Alexander Mikhaylov, Ryan N. Wilson, Kristen M. Parzuchowski, Michael D. Mazurek, Charles H. Camp Jr, Martin J. Stevens, Ralph Jimenez

Abstract: It has been proposed that entangled two-photon absorption (E2PA) can be observed with up to 10 orders of magnitude lower photon flux than its classical counterpart. However, there is a significant controversy regarding the magnitude of this quantum enhancement in excitation efficiency. We investigated the fluorescence signals from Rhodamine 6G and LDS798 excited with a CW laser or an entangled pho… ▽ More It has been proposed that entangled two-photon absorption (E2PA) can be observed with up to 10 orders of magnitude lower photon flux than its classical counterpart. However, there is a significant controversy regarding the magnitude of this quantum enhancement in excitation efficiency. We investigated the fluorescence signals from Rhodamine 6G and LDS798 excited with a CW laser or an entangled photon pair source at 1060 nm. We observed a signal that originates from hot-band absorption (HBA), which is one-photon absorption from thermally-populated vibrational levels of the ground electronic state. This mechanism, which has not been previously discussed in the context of E2PA, produces a signal with a linear power dependence, as would be expected for entangled two-photon excited fluorescence (E2PEF). For the typical conditions under which E2PEF measurements are performed, contributions from the HBA process could lead to a several orders-of-magnitude overestimate of the quantum advantage for excitation efficiency. △ Less

Submitted 30 January, 2022; v1 submitted 10 November, 2021; originally announced November 2021.

Impedance-matched differential superconducting nanowire detectors

Authors: Marco Colangelo, Boris Korzh, Jason P. Allmaras, Andrew D. Beyer, Andrew S. Mueller, Ryan M. Briggs, Bruce Bumble, Marcus Runyan, Martin J. Stevens, Adam N. McCaughan, Di Zhu, Stephen Smith, Wolfgang Becker, Lautaro Narváez, Joshua C. Bienfang, Simone Frasca, Angel E. Velasco, Cristián H. Peña, Edward E. Ramirez, Alexander B. Walter, Ekkehart Schmidt, Emma E. Wollman, Maria Spiropulu, Richard Mirin, Sae Woo Nam , et al. (2 additional authors not shown)

Abstract: Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a h… ▽ More Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Demonstration that Einstein-Podolsky-Rosen steering requires more than one bit of faster-than-light information transmission

Authors: Yu Xiang, Michael D. Mazurek, Joshua C. Bienfang, Michael A. Wayne, Carlos Abellán, Waldimar Amaya, Morgan W. Mitchell, Richard P. Mirin, Sae Woo Nam, Qiongyi He, Martin J. Stevens, Lynden K. Shalm, Howard M. Wiseman

Abstract: Schrödinger held that a local quantum system has some objectively real quantum state and no other (hidden) properties. He therefore took the Einstein-Podolsky-Rosen (EPR) phenomenon, which he generalized and called `steering', to require nonlocal wavefunction collapse. Because this would entail faster-than-light (FTL) information transmission, he doubted that it would be seen experimentally. Here… ▽ More Schrödinger held that a local quantum system has some objectively real quantum state and no other (hidden) properties. He therefore took the Einstein-Podolsky-Rosen (EPR) phenomenon, which he generalized and called `steering', to require nonlocal wavefunction collapse. Because this would entail faster-than-light (FTL) information transmission, he doubted that it would be seen experimentally. Here we report a demonstration of EPR steering with entangled photon pairs that puts--in Schrödinger's interpretation--a non-zero lower bound on the amount of FTL information transmission. We develop a family of $n$-setting loss-tolerant EPR-steering inequalities allowing for a size-$d$ classical message sent from Alice's laboratory to Bob's. For the case $n=3$ and $d=2$ (one bit) we observe a statistically significant violation. Our experiment closes the efficiency and locality loopholes, and we address the freedom-of-choice loophole by using quantum random number generators to independently choose Alice's and Bob's measurement basis settings. To close the efficiency and locality loopholes simultaneously, we introduce methods for quickly switching between three mutually unbiased measurement bases and for accurately characterizing the efficiency of detectors. From the space-time arrangement of our experiment, we can conclude that if the mechanism for the observed bipartite correlations is that Alice's measurement induces wave-function collapse of Bob's particle, then more than one bit of information must travel from Alice to Bob at more than three times the speed of light. △ Less

Submitted 9 August, 2021; v1 submitted 27 May, 2021; originally announced May 2021.

Comments: 10 pages plus 9 pages of supplemental material. v2 includes changes to text explaining Eq. (2), in section V.1., and in first paragraph of section VI

Witnessing the survival of time-energy entanglement through biological tissue and scattering media

Authors: Daniel J. Lum, Michael D. Mazurek, Alexander Mikhaylov, Kristen M. Parzuchowski, Ryan N. Wilson, Ralph Jimenez, Thomas Gerrits, Martin J. Stevens, Marcus T. Cicerone, Charles H. Camp Jr

Abstract: We demonstrate the preservation of time-energy entanglement of near-IR photons through thick biological media ($\leq$1.55 mm) and tissue ($\leq$ 235 $μ$m) at room temperature. Using a Franson-type interferometer, we demonstrate interferometric contrast of over 0.9 in skim milk, 2% milk, and chicken tissue. This work supports the many proposed opportunities for nonclassical light in biological imag… ▽ More We demonstrate the preservation of time-energy entanglement of near-IR photons through thick biological media ($\leq$1.55 mm) and tissue ($\leq$ 235 $μ$m) at room temperature. Using a Franson-type interferometer, we demonstrate interferometric contrast of over 0.9 in skim milk, 2% milk, and chicken tissue. This work supports the many proposed opportunities for nonclassical light in biological imaging and analyses from sub-shot noise measurements to entanglement-enhanced fluorescence imaging, clearly indicating that the entanglement characteristics of photons can be maintained even after propagation through thick, turbid biological samples. △ Less

Submitted 25 February, 2021; originally announced February 2021.

Comments: 13 pages, 4 figures, 1 table

Journal ref: Biomed. Opt. Express 12, 3658-3670 (2021)

Setting bounds on two-photon absorption cross-sections in common fluorophores with entangled photon pair excitation

Authors: Kristen M. Parzuchowski, Alexander Mikhaylov, Michael D. Mazurek, Ryan N. Wilson, Daniel J. Lum, Thomas Gerrits, Charles H. Camp Jr., Martin J. Stevens, Ralph Jimenez

Abstract: Excitation with entangled photon pairs may lead to an increase in the efficiency of two-photon absorption at low photon flux. The corresponding process, entangled two-photon absorption (E2PA), has been investigated in numerous theoretical and experimental studies. However, significant ambiguity and inconsistency remain in the literature about the absolute values of E2PA cross-sections. Here, we us… ▽ More Excitation with entangled photon pairs may lead to an increase in the efficiency of two-photon absorption at low photon flux. The corresponding process, entangled two-photon absorption (E2PA), has been investigated in numerous theoretical and experimental studies. However, significant ambiguity and inconsistency remain in the literature about the absolute values of E2PA cross-sections. Here, we use a fluorescence-based registration scheme to experimentally determine upper bounds on the cross-sections for six fluorophores. These bounds are up to four orders of magnitude lower than the smallest published cross-section. For two samples that have been studied by others, Rhodamine 6G and 9R-S, we measure upper bounds four and five orders of magnitude lower than the previously reported cross-sections. △ Less

Submitted 18 February, 2021; v1 submitted 6 August, 2020; originally announced August 2020.

Comments: 22 pages, 8 figures

Journal ref: Phys. Rev. Applied 15, 044012 (2021)

Device-independent Randomness Expansion with Entangled Photons

Authors: Lynden K. Shalm, Yanbao Zhang, Joshua C. Bienfang, Collin Schlager, Martin J. Stevens, Michael D. Mazurek, Carlos Abellán, Waldimar Amaya, Morgan W. Mitchell, Mohammad A. Alhejji, Honghao Fu, Joel Ornstein, Richard P. Mirin, Sae Woo Nam, Emanuel Knill

Abstract: With the growing availability of experimental loophole-free Bell tests, it has become possible to implement a new class of device-independent random number generators whose output can be certified to be uniformly random without requiring a detailed model of the quantum devices used. However, all of these experiments require many input bits in order to certify a small number of output bits, and it… ▽ More With the growing availability of experimental loophole-free Bell tests, it has become possible to implement a new class of device-independent random number generators whose output can be certified to be uniformly random without requiring a detailed model of the quantum devices used. However, all of these experiments require many input bits in order to certify a small number of output bits, and it is an outstanding challenge to develop a system that generates more randomness than is consumed. Here, we devise a device-independent spot-checking protocol that consumes only uniform bits without requiring any additional bits with a specific bias. Implemented with a photonic loophole-free Bell test, we can produce 24% more certified output bits (1,181,264,237) than consumed input bits (953,301,640). The experiment ran for 91.0 hours, creating randomness at an average rate of 3606 bits/s with a soundness error bounded by $5.7\times 10^{-7}$ in the presence of classical side information. Our system will allow for greater trust in public sources of randomness, such as randomness beacons, and may one day enable high-quality private sources of randomness as the device footprint shrinks. △ Less

Submitted 20 October, 2021; v1 submitted 23 December, 2019; originally announced December 2019.

Comments: The version accepted by Nature Physics. 6 pages (main text) + 20 pages (supplementary information), 7 figures

Journal ref: Nat. Phys. 17, 452-456 (2021)

Experimental Low-Latency Device-Independent Quantum Randomness

Authors: Yanbao Zhang, Lynden K. Shalm, Joshua C. Bienfang, Martin J. Stevens, Michael D. Mazurek, Sae Woo Nam, Carlos Abellán, Waldimar Amaya, Morgan W. Mitchell, Honghao Fu, Carl A. Miller, Alan Mink, Emanuel Knill

Abstract: Applications of randomness such as private key generation and public randomness beacons require small blocks of certified random bits on demand. Device-independent quantum random number generators can produce such random bits, but existing quantum-proof protocols and loophole-free implementations suffer from high latency, requiring many hours to produce any random bits. We demonstrate device-indep… ▽ More Applications of randomness such as private key generation and public randomness beacons require small blocks of certified random bits on demand. Device-independent quantum random number generators can produce such random bits, but existing quantum-proof protocols and loophole-free implementations suffer from high latency, requiring many hours to produce any random bits. We demonstrate device-independent quantum randomness generation from a loophole-free Bell test with a more efficient quantum-proof protocol, obtaining multiple blocks of $512$ bits with an average experiment time of less than $5$ min per block and with a certified error bounded by $2^{-64}\approx 5.42\times 10^{-20}$. △ Less

Submitted 23 December, 2019; v1 submitted 19 December, 2018; originally announced December 2018.

Comments: 4.5 pages (main text) + 8.5 pages (supplemental material), the version accepted to PRL

Journal ref: Phys. Rev. Lett. 124, 010505 (2020)

Challenging local realism with human choices

Authors: The BIG Bell Test Collaboration, C. Abellán, A. Acín, A. Alarcón, O. Alibart, C. K. Andersen, F. Andreoli, A. Beckert, F. A. Beduini, A. Bendersky, M. Bentivegna, P. Bierhorst, D. Burchardt, A. Cabello, J. Cariñe, S. Carrasco, G. Carvacho, D. Cavalcanti, R. Chaves, J. Cortés-Vega, A. Cuevas, A. Delgado, H. de Riedmatten, C. Eichler, P. Farrera , et al. (83 additional authors not shown)

Abstract: A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves… ▽ More A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves making assumptions about the physics that one aims to test. Bell himself noted this weakness in using physical setting choices and argued that human `free will' could be used rigorously to ensure unpredictability in Bell tests. Here we report a set of local-realism tests using human choices, which avoids assumptions about predictability in physics. We recruited about 100,000 human participants to play an online video game that incentivizes fast, sustained input of unpredictable selections and illustrates Bell-test methodology. The participants generated 97,347,490 binary choices, which were directed via a scalable web platform to 12 laboratories on five continents, where 13 experiments tested local realism using photons, single atoms, atomic ensembles, and superconducting devices. Over a 12-hour period on 30 November 2016, participants worldwide provided a sustained data flow of over 1,000 bits per second to the experiments, which used different human-generated data to choose each measurement setting. The observed correlations strongly contradict local realism and other realistic positions in bipartite and tripartite scenarios. Project outcomes include closing the `freedom-of-choice loophole' (the possibility that the setting choices are influenced by `hidden variables' to correlate with the particle properties), the utilization of video-game methods for rapid collection of human generated randomness, and the use of networking techniques for global participation in experimental science. △ Less

Submitted 9 November, 2018; v1 submitted 11 May, 2018; originally announced May 2018.

Comments: This version includes minor changes resulting from reviewer and editorial input. Abstract shortened to fit within arXiv limits

Journal ref: Nature, volume 557, pages 212-216 (2018)

Demonstrating sub-3 ps temporal resolution in a superconducting nanowire single-photon detector

Authors: B. A. Korzh, Q-Y. Zhao, S. Frasca, J. P. Allmaras, T. M. Autry, E. A. Bersin, M. Colangelo, G. M. Crouch, A. E. Dane, T. Gerrits, F. Marsili, G. Moody, E. Ramirez, J. D. Rezac, M. J. Stevens, E. E. Wollman, D. Zhu, P. D. Hale, K. L. Silverman, R. P. Mirin, S. W. Nam, M. D. Shaw, K. K. Berggren

Abstract: Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs… ▽ More Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs) have emerged as the highest efficiency time-resolving single-photon counting detectors available in the near infrared. As the detection mechanism in SNSPDs occurs on picosecond time scales, SNSPDs have been demonstrated with exquisite temporal resolution below 15 ps. We reduce this value to 2.7$\pm$0.2 ps at 400 nm and 4.6$\pm$0.2 ps at 1550 nm, using a specialized niobium nitride (NbN) SNSPD. The observed photon-energy dependence of the temporal resolution and detection latency suggests that intrinsic effects make a significant contribution. △ Less

Submitted 18 April, 2018; originally announced April 2018.

Comments: 25 pages, 9 figures

Experimentally Generated Randomness Certified by the Impossibility of Superluminal Signals

Authors: Peter Bierhorst, Emanuel Knill, Scott Glancy, Yanbao Zhang, Alan Mink, Stephen Jordan, Andrea Rommal, Yi-Kai Liu, Bradley Christensen, Sae Woo Nam, Martin J. Stevens, Lynden K. Shalm

Abstract: From dice to modern complex circuits, there have been many attempts to build increasingly better devices to generate random numbers. Today, randomness is fundamental to security and cryptographic systems, as well as safeguarding privacy. A key challenge with random number generators is that it is hard to ensure that their outputs are unpredictable. For a random number generator based on a physical… ▽ More From dice to modern complex circuits, there have been many attempts to build increasingly better devices to generate random numbers. Today, randomness is fundamental to security and cryptographic systems, as well as safeguarding privacy. A key challenge with random number generators is that it is hard to ensure that their outputs are unpredictable. For a random number generator based on a physical process, such as a noisy classical system or an elementary quantum measurement, a detailed model describing the underlying physics is required to assert unpredictability. Such a model must make a number of assumptions that may not be valid, thereby compromising the integrity of the device. However, it is possible to exploit the phenomenon of quantum nonlocality with a loophole-free Bell test to build a random number generator that can produce output that is unpredictable to any adversary limited only by general physical principles. With recent technological developments, it is now possible to carry out such a loophole-free Bell test. Here we present certified randomness obtained from a photonic Bell experiment and extract 1024 random bits uniform to within $10^{-12}$. These random bits could not have been predicted within any physical theory that prohibits superluminal signaling and allows one to make independent measurement choices. To certify and quantify the randomness, we describe a new protocol that is optimized for apparatuses characterized by a low per-trial violation of Bell inequalities. We thus enlisted an experimental result that fundamentally challenges the notion of determinism to build a system that can increase trust in random sources. In the future, random number generators based on loophole-free Bell tests may play a role in increasing the security and trust of our cryptographic systems and infrastructure. △ Less

Submitted 22 February, 2018; originally announced March 2018.

Comments: Substantial overlap with arXiv:1702.05178. Compared to arXiv:1702.05178, the current manuscript reports new experimental results with experimental improvements described in a new Methods section. There are also some small adjustments to theory. A revised version of this manuscript has been accepted for publication in Nature

Journal ref: Nature 556:223-226 (2018)

Ordering Nanoparticles with Polymer Brushes

Authors: Shengfeng Cheng, Mark J. Stevens, Gary S. Grest

Abstract: Ordering nanoparticles into a desired super-structure is often crucial for their technological applications. We use molecular dynamics simulations to study the assembly of nanoparticles in a polymer brush randomly grafted to a planar surface as the solvent evaporates. Initially, the nanoparticles are dispersed in a solvent that wets the polymer brush. After the solvent evaporates, the nanoparticle… ▽ More Ordering nanoparticles into a desired super-structure is often crucial for their technological applications. We use molecular dynamics simulations to study the assembly of nanoparticles in a polymer brush randomly grafted to a planar surface as the solvent evaporates. Initially, the nanoparticles are dispersed in a solvent that wets the polymer brush. After the solvent evaporates, the nanoparticles are either inside the brush or adsorbed at the surface of the brush, depending on the strength of the nanoparticle-polymer interaction. For strong nanoparticle-polymer interactions, a 2-dimensional ordered array is only formed when the brush density is finely tuned to accommodate a single layer of nanoparticles. When the brush density is higher or lower than this optimal value, the distribution of nanoparticles shows large fluctuations in space and the packing order diminishes. For weak nanoparticle-polymer interactions, the nanoparticles order into a hexagonal array on top of the polymer brush as long as the grafting density is high enough to yield a dense brush. An interesting healing effect is observed for a low-grafting-density polymer brush that can become more uniform in the presence of weakly adsorbed nanoparticles. △ Less

Submitted 16 November, 2017; originally announced November 2017.

Comments: 9 pages, 6 figures

Journal ref: J. Chem. Phys. 147, 224901 (2017)

All-silicon light-emitting diodes waveguide-integrated with superconducting single-photon detectors

Authors: Sonia Buckley, Jeffrey Chiles, Adam N. McCaughan, Galan Moody, Kevin L. Silverman, Martin J. Stevens, Richard P. Mirin, Sae Woo Nam, Jeffrey M. Shainline

Abstract: We demonstrate cryogenic, electrically-injected, waveguide-coupled Si light-emitting diodes (LEDs) operating at 1.22 $μ$m. The active region of the LED consists of W centers implanted in the intrinsic region of a $p$-$i$-$n$ diode. The LEDs are integrated on waveguides with superconducting nanowire single-photon detectors (SNSPDs). We demonstrate the scalability of this platform with an LED couple… ▽ More We demonstrate cryogenic, electrically-injected, waveguide-coupled Si light-emitting diodes (LEDs) operating at 1.22 $μ$m. The active region of the LED consists of W centers implanted in the intrinsic region of a $p$-$i$-$n$ diode. The LEDs are integrated on waveguides with superconducting nanowire single-photon detectors (SNSPDs). We demonstrate the scalability of this platform with an LED coupled to eleven SNSPDs in a single integrated photonic device. Such on-chip optical links may be useful for quantum information or neuromorphic computing applications. △ Less

Submitted 6 July, 2017; originally announced August 2017.

Journal ref: Appl. Phys. Lett. 111, 141101 (2017)

Fano fluctuations in superconducting nanowire single-photon detectors

Authors: A. G. Kozorezov, C. Lambert, F. Marsili, M. J. Stevens, V. B. Verma, J. P. Allmaras, M. D. Shaw, R. P. Mirin, Sae Woo Nam

Abstract: Because of their universal nature, Fano fluctuations are expected to influence the response of superconducting nanowire single-photon detectors (SNSPDs). We predict that photon counting rate ($PCR$) as a function of bias current ($I_B$) in SNSPDs is described by an integral over a transverse coordinate-dependent complementary error function. The latter describes smearing of local responses due to… ▽ More Because of their universal nature, Fano fluctuations are expected to influence the response of superconducting nanowire single-photon detectors (SNSPDs). We predict that photon counting rate ($PCR$) as a function of bias current ($I_B$) in SNSPDs is described by an integral over a transverse coordinate-dependent complementary error function. The latter describes smearing of local responses due to Fano fluctuations of the amount of energy deposited into electronic system. The finite width, $σ$, of the $PCR$ vs $I_B$ arises from fluctuations in the energy partition between quasiparticles and phonons during the energy down-conversion cascade. In narrow-nanowire SNSPDs the local responses are uniform, and the effect of Fano-fluctuations on $σ$ is dominant. In wide-nanowire SNSPDs with strong coordinate dependence of local responses due to vortex-antivortex unbinding and vortex entry from edges, Fano-fluctuations smear singularities imprinted by vorticity on the transition part of $PCR$ curve. We demonstrate good agreement between theory and experiments for a series of bath temperatures and photon energies in narrow-wire WSi SNSPDs. The time-resolved hotspot relaxation curves predicted by Fano fluctuations match the Lorentzian shapes observed in experiments over the whole range of bias currents investigated except for their tails. △ Less

Submitted 9 February, 2017; originally announced February 2017.

Comments: 12 pages, 8 figures

Journal ref: Phys. Rev. B 96, 054507 (2017)

Experimental investigation of the detection mechanism in WSi nanowire superconducting single photon detectors

Authors: Rosalinda Gaudio, Jelmer J. Renema, Zili Zhou, Varun B. Verma, Adriana E. Lita, Jeffrey Shainline, Martin J. Stevens, Richard P. Mirin, Sae Woo Nam, Martin P. van Exter, Michiel J. A. de Dood, Andrea Fiore

Abstract: We use quantum detector tomography to investigate the detection mechanism in WSi nanowire superconducting single photon detectors (SSPDs). To this purpose, we fabricated a 250nm wide and 250nm long WSi nanowire and measured its response to impinging photons with wavelengths ranging from $λ$ = 900 nm to $λ$ = 1650 nm. Tomographic measurements show that the detector response depends on the total exc… ▽ More We use quantum detector tomography to investigate the detection mechanism in WSi nanowire superconducting single photon detectors (SSPDs). To this purpose, we fabricated a 250nm wide and 250nm long WSi nanowire and measured its response to impinging photons with wavelengths ranging from $λ$ = 900 nm to $λ$ = 1650 nm. Tomographic measurements show that the detector response depends on the total excitation energy only. Moreover, for energies Et > 0.8eV the current energy relation is linear, similar to what was observed in NbN nanowires, whereas the current-energy relation deviates from linear behaviour for total energies below 0.8eV. △ Less

Submitted 7 June, 2016; v1 submitted 24 February, 2016; originally announced February 2016.

A strong loophole-free test of local realism

Authors: Lynden K. Shalm, Evan Meyer-Scott, Bradley G. Christensen, Peter Bierhorst, Michael A. Wayne, Martin J. Stevens, Thomas Gerrits, Scott Glancy, Deny R. Hamel, Michael S. Allman, Kevin J. Coakley, Shellee D. Dyer, Carson Hodge, Adriana E. Lita, Varun B. Verma, Camilla Lambrocco, Edward Tortorici, Alan L. Migdall, Yanbao Zhang, Daniel R. Kumor, William H. Farr, Francesco Marsili, Matthew D. Shaw, Jeffrey A. Stern, Carlos Abellán , et al. (9 additional authors not shown)

Abstract: We present a loophole-free violation of local realism using entangled photon pairs. We ensure that all relevant events in our Bell test are spacelike separated by placing the parties far enough apart and by using fast random number generators and high-speed polarization measurements. A high-quality polarization-entangled source of photons, combined with high-efficiency, low-noise, single-photon de… ▽ More We present a loophole-free violation of local realism using entangled photon pairs. We ensure that all relevant events in our Bell test are spacelike separated by placing the parties far enough apart and by using fast random number generators and high-speed polarization measurements. A high-quality polarization-entangled source of photons, combined with high-efficiency, low-noise, single-photon detectors, allows us to make measurements without requiring any fair-sampling assumptions. Using a hypothesis test, we compute p-values as small as $5.9\times 10^{-9}$ for our Bell violation while maintaining the spacelike separation of our events. We estimate the degree to which a local realistic system could predict our measurement choices. Accounting for this predictability, our smallest adjusted p-value is $2.3 \times 10^{-7}$. We therefore reject the hypothesis that local realism governs our experiment. △ Less

Submitted 6 September, 2016; v1 submitted 10 November, 2015; originally announced November 2015.

Comments: Supplemental material available as an ancillary file

Journal ref: Phys. Rev. Lett. 115, 250402 (2015)

Quantum teleportation over 100 km of fiber using highly-efficient superconducting nanowire single photon detectors

Authors: Hiroki Takesue, Shellee D. Dyer, Martin J. Stevens, Varun Verma, Richard P. Mirin, Sae Woo Nam

Abstract: Quantum teleportation is an essential quantum operation by which we can transfer an unknown quantum state to a remote location with the help of quantum entanglement and classical communication. Since the first experimental demonstrations using photonic qubits and continuous variables, the distance of photonic quantum teleportation over free space channels has continued to increase and has reached… ▽ More Quantum teleportation is an essential quantum operation by which we can transfer an unknown quantum state to a remote location with the help of quantum entanglement and classical communication. Since the first experimental demonstrations using photonic qubits and continuous variables, the distance of photonic quantum teleportation over free space channels has continued to increase and has reached >100 km. On the other hand, quantum teleportation over optical fiber has been challenging, mainly because the multi-fold photon detection that inevitably accompanies quantum teleportation experiments has been very inefficient due to the relatively low detection efficiencies of typical telecom-band single photon detectors. Here, we report efficient quantum teleportation over optical fiber using four high-detection efficiency superconducting nanowire superconducting single-photon detectors (SNSPD) based on MoSi. These SNSPDs make it possible to perform highly-efficient multi-fold photon measurements, allowing us to confirm that the quantum states of input photons were successfully teleported over 100 km of fiber. △ Less

Submitted 1 October, 2015; originally announced October 2015.

Comments: 6 pages, 4 figures. First draft

Journal ref: Optica 2, 832-835 (2015) (full version with supplementary)

Quantum-correlated photon pairs generated in a commercial 45nm complementary metal-oxide semiconductor microelectronics chip

Authors: Cale M. Gentry, Jeffrey M. Shainline, Mark T. Wade, Martin J. Stevens, Shellee D. Dyer, Xiaoge Zeng, Fabio Pavanello, Thomas Gerrits, Sae Woo Nam, Richard P. Mirin, Miloš A. Popović

Abstract: Correlated photon pairs are a fundamental building block of quantum photonic systems. While pair sources have previously been integrated on silicon chips built using customized photonics manufacturing processes, these often take advantage of only a small fraction of the established techniques for microelectronics fabrication and have yet to be integrated in a process which also supports electronic… ▽ More Correlated photon pairs are a fundamental building block of quantum photonic systems. While pair sources have previously been integrated on silicon chips built using customized photonics manufacturing processes, these often take advantage of only a small fraction of the established techniques for microelectronics fabrication and have yet to be integrated in a process which also supports electronics. Here we report the first demonstration of quantum-correlated photon pair generation in a device fabricated in an unmodified advanced (sub-100nm) complementary metal-oxide-semiconductor (CMOS) process, alongside millions of working transistors. The microring resonator photon pair source is formed in the transistor layer structure, with the resonator core formed by the silicon layer typically used for the transistor body. With ultra-low continuous-wave on-chip pump powers ranging from 5 $μ$W to 400 $μ$W, we demonstrate pair generation rates between 165 Hz and 332 kHz using >80% efficient WSi superconducting nanowire single photon detectors. Coincidences-to-accidentals ratios consistently exceeding 40 were measured with a maximum of 55. In the process of characterizing this source we also accurately predict pair generation rates from the results of classical four-wave mixing measurements. This proof-of-principle device demonstrates the potential of commercial CMOS microelectronics as an advanced quantum photonics platform with capability of large volume, pristine process control, and where state-of-the-art high-speed digital circuits could interact with quantum photonic circuits. △ Less

Submitted 24 July, 2015; v1 submitted 4 July, 2015; originally announced July 2015.

Hotspot Relaxation Dynamics in a Current Carrying Superconductor

Authors: F. Marsili, M. J. Stevens, A. Kozorezov, V. B. Verma, Colin Lambert, J. A. Stern, R. Horansky, S. Dyer, S. Duff, D. P. Pappas, A. Lita, M. D. Shaw, R. P. Mirin, S. W. Nam

Abstract: We experimentally studied the dynamics of optically excited hotspots in current carrying WSi superconducting nanowires as a function of bias current, bath temperature and excitation wavelength. We discovered that: (1) the hotspot relaxation is a factor of ~ 4 slower in WSi than in NbN; (2) the hotspot relaxation time depends on bias current, and (3) the current dependence of the hotspot relaxation… ▽ More We experimentally studied the dynamics of optically excited hotspots in current carrying WSi superconducting nanowires as a function of bias current, bath temperature and excitation wavelength. We discovered that: (1) the hotspot relaxation is a factor of ~ 4 slower in WSi than in NbN; (2) the hotspot relaxation time depends on bias current, and (3) the current dependence of the hotspot relaxation time changes with temperature and wavelength. We explained all of these effects with a model based on quasi particle recombination. △ Less

Submitted 9 June, 2015; originally announced June 2015.

Journal ref: Phys. Rev. B 93, 094518 (2016)

Near-infrared single-photon spectroscopy of a whispering gallery mode resonator using energy-resolving transition edge sensors

Authors: Michael Förtsch, Thomas Gerrits, Martin J. Stevens, Dmitry Strekalov, Gerhard Schunk, Josef U. Fürst, Ulrich Vogl, Florian Sedlmeir, Harald G. L. Schwefel, Gerd Leuchs, Sae Woo Nam, Christoph Marquardt

Abstract: We demonstrate a method to perform spectroscopy of near-infrared single photons without the need of dispersive elements. This method is based on a photon energy resolving transition edge sensor and is applied for the characterization of widely wavelength tunable narrow-band single photons emitted from a crystalline whispering gallery mode resonator. We measure the emission wavelength of the genera… ▽ More We demonstrate a method to perform spectroscopy of near-infrared single photons without the need of dispersive elements. This method is based on a photon energy resolving transition edge sensor and is applied for the characterization of widely wavelength tunable narrow-band single photons emitted from a crystalline whispering gallery mode resonator. We measure the emission wavelength of the generated signal and idler photons with an uncertainty of up to 2 nm. △ Less

Submitted 23 October, 2014; originally announced October 2014.

Comments: 4 pages, 4 figures

Highly efficient generation of single-mode photon pairs using a crystalline whispering gallery mode resonator

Authors: Michael Förtsch, Gerhard Schunk, Josef U. Fürst, Dmitry Strekalov, Thomas Gerrits, Martin J. Stevens, Florian Sedlmeir, Harald G. L. Schwefel, Sae Woo Nam, Gerd Leuchs, Christoph Marquardt

Abstract: We report a highly efficient source of narrow-band photon pairs based on parametric down-conversion in a crystalline whispering gallery mode resonator. Remarkably, each photon of a pair is strictly emitted into a single spatial and temporal mode, as witnessed by Glaubers autocorrelation function. We explore the phase-matching conditions in spherical geometries, and determine the requirements of th… ▽ More We report a highly efficient source of narrow-band photon pairs based on parametric down-conversion in a crystalline whispering gallery mode resonator. Remarkably, each photon of a pair is strictly emitted into a single spatial and temporal mode, as witnessed by Glaubers autocorrelation function. We explore the phase-matching conditions in spherical geometries, and determine the requirements of the single-mode operation. Understanding these conditions has allowed us to experimentally demonstrate a single-mode pair-detection rate of $0.97 \cdot 10^6$ pairs/s per mW pump power per 20 MHz bandwidth without the need of additional filter cavities. △ Less

Submitted 2 April, 2014; originally announced April 2014.

Comments: 7 pages, 6 figures

Journal ref: Phys. Rev. A 91, 023812 (2015)

Self-assembly of Chiral Tubules

Authors: Shengfeng Cheng, Mark J. Stevens

Abstract: The efficient and controlled assembly of complex structures from macromolecular building blocks is a critical open question in both biological systems and nanoscience. Using molecular dynamics simulations we study the self-assembly of tubular structures from model macromolecular monomers with multiple binding sites on their surfaces [Cheng et al., Soft Matter 8, 5666-5678 (2012)]. In this work we… ▽ More The efficient and controlled assembly of complex structures from macromolecular building blocks is a critical open question in both biological systems and nanoscience. Using molecular dynamics simulations we study the self-assembly of tubular structures from model macromolecular monomers with multiple binding sites on their surfaces [Cheng et al., Soft Matter 8, 5666-5678 (2012)]. In this work we add chirality to the model monomer and a lock-and-key interaction. The self-assembly of free monomers into tubules yields a pitch value that often does not match the chirality of the monomer (including achiral monomers). We show that this mismatch occurs because of a twist deformation that brings the lateral interaction sites into alignment when the tubule pitch differs from the monomer chirality. The energy cost for this deformation is small as the energy distributions substantially overlap for small differences in the pitch and chirality. In order to control the tubule pitch by preventing the twist deformation, the interaction between the vertical surfaces must be increased without resulting in kinetically trapped structures. For this purpose, we employ the lock-and-key interactions and obtain good control of the self-assembled tubule pitch. These results explain some fundamental features of microtubules. The vertical interaction strength is larger than the lateral in microtubules because this yields a controlled assembly of tubules with the proper pitch. We also generally find that the control of the assembly into tubules is difficult, which explains the wide range of pitch and protofilament number observed in microtubule assembly. △ Less

Submitted 19 November, 2013; originally announced November 2013.

Comments: To appear in Soft Matter, 14 pages, 11 figures, 2 tables, Supplementary Material included

Journal ref: Soft Matter 10, 510 (2014)

Self-assembly of artificial microtubules

Authors: Shengfeng Cheng, Ankush Aggarwal, Mark J. Stevens

Abstract: Understanding the complex self-assembly of biomacromolecules is a major outstanding question. Microtubules are one example of a biopolymer that possesses characteristics quite distinct from standard synthetic polymers that are derived from its hierarchical structure. In order to understand how to design and build artificial polymers that possess features similar to those of microtubules, we have i… ▽ More Understanding the complex self-assembly of biomacromolecules is a major outstanding question. Microtubules are one example of a biopolymer that possesses characteristics quite distinct from standard synthetic polymers that are derived from its hierarchical structure. In order to understand how to design and build artificial polymers that possess features similar to those of microtubules, we have initially studied the self-assembly of model monomers into a tubule geometry. Our model monomer has a wedge shape with lateral and vertical binding sites that are designed to form tubules. We used molecular dynamics simulations to study the assembly process for a range of binding site interaction strengths. In addition to determining the optimal regime for obtaining tubules, we have calculated a diagram of the structures that form over a wide range of interaction strengths. Unexpectedly, we find that the helical tubules form, even though the monomer geometry is designed for nonhelical tubules. We present the detailed dynamics of the tubule self-assembly process and show that the interaction strengths must be in a limited range to allow rearrangement within clusters. We extended previous theoretical methods to treat our system and to calculate the boundaries between different structures in the diagram. △ Less

Submitted 10 January, 2012; originally announced January 2012.

Comments: 15 pages, 11 figures

Journal ref: SOFT MATTER 8, 5666-5678 (2012)

Generation of degenerate, factorizable, pulsed squeezed light at telecom wavelengths

Authors: Thomas Gerrits, Martin J. Stevens, Burm Baek, Brice Calkins, Adriana Lita, Scott Glancy, Emanuel Knill, Sae Woo Nam, Richard P. Mirin, Robert H. Hadfield, Ryan S. Bennink, Warren P. Grice, Sander Dorenbos, Tony Zijlstra, Teun Klapwijk, Val Zwiller

Abstract: We characterize a periodically poled KTP crystal that produces an entangled, two-mode, squeezed state with orthogonal polarizations, nearly identical, factorizable frequency modes, and few photons in unwanted frequency modes. We focus the pump beam to create a nearly circular joint spectral probability distribution between the two modes. After disentangling the two modes, we observe Hong-Ou-Mandel… ▽ More We characterize a periodically poled KTP crystal that produces an entangled, two-mode, squeezed state with orthogonal polarizations, nearly identical, factorizable frequency modes, and few photons in unwanted frequency modes. We focus the pump beam to create a nearly circular joint spectral probability distribution between the two modes. After disentangling the two modes, we observe Hong-Ou-Mandel interference with a raw (background corrected) visibility of 86 % (95 %) when an 8.6 nm bandwidth spectral filter is applied. We measure second order photon correlations of the entangled and disentangled squeezed states with both superconducting nanowire single-photon detectors and photon-number-resolving transition-edge sensors. Both methods agree and verify that the detected modes contain the desired photon number distributions. △ Less

Submitted 16 November, 2011; v1 submitted 3 August, 2011; originally announced August 2011.

Journal ref: Opt. Express 19(24), 24434-24447 (2011)

Higher-order photon correlations in pulsed photonic crystal nanolasers

Authors: David Elvira, Xavier Hachair, V. Verma, Remy Braive, Gregoire Beaudoin, Isabelle Robert-Philip, Isabelle Sagnes, Burm Baek, Sae Woo Nam, Eric A. Dauler, Izo Abram, Martin J. Stevens, Alexios Beveratos

Abstract: We report on the higher-order photon correlations of a high-$β$ nanolaser under pulsed excitation at room temperature. Using a multiplexed four-element superconducting single photon detector we measured g$^{(n)}(\vec{0})$ with $n$=2,3,4. All orders of correlation display partially chaotic statistics, even at four times the threshold excitation power. We show that this departure from coherence and… ▽ More We report on the higher-order photon correlations of a high-$β$ nanolaser under pulsed excitation at room temperature. Using a multiplexed four-element superconducting single photon detector we measured g$^{(n)}(\vec{0})$ with $n$=2,3,4. All orders of correlation display partially chaotic statistics, even at four times the threshold excitation power. We show that this departure from coherence and Poisson statistics is due to the quantum fluctuations associated with the small number of dipoles and photons involved in the lasing process. △ Less

Submitted 7 June, 2011; originally announced June 2011.

Observation of Transparency of Erbium-doped Silicon nitride in photonic crystal nanobeam cavities

Authors: Yiyang Gong, Maria Makarova, Selcuk Yerci, Rui Li, Martin J. Stevens, Burm Baek, Sae Woo Nam, Luca Dal Negro, Jelena Vuckovic

Abstract: One-dimensional nanobeam photonic crystal cavities are fabricated in an Er-doped amorphous silicon nitride layer. Photoluminescence from the cavities around 1.54 um is studied at cryogenic and room temperatures at different optical pump powers. The resonators demonstrate Purcell enhanced absorption and emission rates, also confirmed by time-resolved measurements. Resonances exhibit linewidth narro… ▽ More One-dimensional nanobeam photonic crystal cavities are fabricated in an Er-doped amorphous silicon nitride layer. Photoluminescence from the cavities around 1.54 um is studied at cryogenic and room temperatures at different optical pump powers. The resonators demonstrate Purcell enhanced absorption and emission rates, also confirmed by time-resolved measurements. Resonances exhibit linewidth narrowing with pump power, signifying absorption bleaching and the onset of stimulated emission in the material at both 5.5 K and room temperature. We estimate from the cavity linewidths that Er has been pumped to transparency at the cavity resonance wavelength. △ Less

Submitted 9 March, 2010; originally announced March 2010.

Comments: 10 pages, 7 figures

Single-photon detection timing jitter in a visible light photon counter

Authors: Burm Baek, Kyle S. McKay, Martin J. Stevens, Jungsang Kim, Henry H. Hogue, Sae Woo Nam

Abstract: Visible light photon counters (VLPCs) offer many attractive features as photon detectors, such as high quantum efficiency and photon number resolution. We report measurements of the single-photon timing jitter in a VLPC, a critical performance factor in a time-correlated single-photon counting measurement, in a fiber-coupled closed-cycle cryocooler. The measured timing jitter is 240 ps full-widt… ▽ More Visible light photon counters (VLPCs) offer many attractive features as photon detectors, such as high quantum efficiency and photon number resolution. We report measurements of the single-photon timing jitter in a VLPC, a critical performance factor in a time-correlated single-photon counting measurement, in a fiber-coupled closed-cycle cryocooler. The measured timing jitter is 240 ps full-width-at-half-maximum at a wavelength of 550 nm, with a dark count rate of 25 000 counts per second. The timing jitter increases modestly at longer wavelengths to 300 ps at 1000 nm, and increases substantially at lower bias voltages as the quantum efficiency is reduced. △ Less

Submitted 27 January, 2010; v1 submitted 30 November, 2009; originally announced November 2009.

Single-photon source characterization with infrared-sensitive superconducting single-photon detectors

Authors: Robert H. Hadfield, Martin J. Stevens, Richard P. Mirin, Sae Woo Nam

Abstract: Single-photon sources and detectors are key enabling technologies in quantum information processing. Nanowire-based superconducting single-photon detectors (SSPDs) offer single-photon detection from the visible well into the infrared with low dark counts, low jitter and short dead times. We report on the high fidelity characterization (via antibunching and spontaneous emission lifetime measureme… ▽ More Single-photon sources and detectors are key enabling technologies in quantum information processing. Nanowire-based superconducting single-photon detectors (SSPDs) offer single-photon detection from the visible well into the infrared with low dark counts, low jitter and short dead times. We report on the high fidelity characterization (via antibunching and spontaneous emission lifetime measurements) of a cavity-coupled single-photon source at 902 nm using a pair of SSPDs. The twin SSPD scheme reported here is well-suited to the characterization of single-photon sources at telecom wavelengths (1310 nm, 1550 nm). △ Less

Submitted 28 July, 2006; originally announced July 2006.

Comments: 4 figures

Capillary waves at the liquid-vapor interface and the surface tension of water models

Authors: Ahmed E. Ismail, Gary S. Grest, Mark J. Stevens

Abstract: Capillary waves occurring at the liquid-vapor interface of water are studied using molecular dynamics simulations. In addition, the surface tension, determined thermodynamically from the difference in the normal and tangential pressure at the liquid-vapor interface, is compared for a number of standard three- and four-point water models. We study four three-point models (SPC/E, TIP3P, TIP3P-CHAR… ▽ More Capillary waves occurring at the liquid-vapor interface of water are studied using molecular dynamics simulations. In addition, the surface tension, determined thermodynamically from the difference in the normal and tangential pressure at the liquid-vapor interface, is compared for a number of standard three- and four-point water models. We study four three-point models (SPC/E, TIP3P, TIP3P-CHARMM, and TIP3P-Ew) and two four-point models (TIP4P and TIP4P-Ew). All of the models examined underestimate the surface tension; the TIP4P-Ew model comes closest to reproducing the experimental data. The surface tension can also be determined from the amplitude of capillary waves at the liquid-vapor interface by varying the surface area of the interface. The surface tensions determined from the amplitude of the logarithmic divergence of the capillary interfacial width and from the traditional thermodynamic method agree only if the density profile is fitted to an error function instead of a hyperbolic tangent function. △ Less

Submitted 1 June, 2006; v1 submitted 3 May, 2006; originally announced May 2006.

Comments: 11 pages, 8 figures, 7 tables. Accepted for publication in J. Chem. Phys. [v2: Added references, corrected minor errors]

Journal ref: J. Chem. Phys. 125, 014702 (2006)

Single photon source characterization with a superconducting single photon detector

Authors: Robert H. Hadfield, Martin J. Stevens, Steven S. Gruber, Aaron J. Miller, Robert E. Schwall, Richard P. Mirin, Sae Woo Nam

Abstract: Superconducting single photon detectors (SSPD) based on nanopatterned niobium nitride wires offer single photon counting at fast rates, low jitter, and low dark counts, from visible wavelengths well into the infrared. We demonstrate the first use of an SSPD, packaged in a commercial cryocooler, for single photon source characterization. The source is an optically pumped, microcavity-coupled InGa… ▽ More Superconducting single photon detectors (SSPD) based on nanopatterned niobium nitride wires offer single photon counting at fast rates, low jitter, and low dark counts, from visible wavelengths well into the infrared. We demonstrate the first use of an SSPD, packaged in a commercial cryocooler, for single photon source characterization. The source is an optically pumped, microcavity-coupled InGaAs quantum dot, emitting single photons on demand at 902 nm. The SSPD replaces the second silicon Avalanche Photodiode (APD) in a Hanbury-Brown Twiss interferometer measurement of the source second-order correlation function, g (2) (tau). The detection efficiency of the superconducting detector system is >2 % (coupling losses included). The SSPD system electronics jitter is 170 ps, versus 550 ps for the APD unit, allowing the source spontaneous emission lifetime to be measured with improved resolution. △ Less

Submitted 3 November, 2005; originally announced November 2005.

Comments: 8 pages

Effect of Mono- and Multivalent Salts on Angle-dependent Attractions between Charged Rods

Authors: Kun-Chun Lee, Itamar Borukhov, William M. Gelbart, Andrea J. Liu, Mark J. Stevens

Abstract: Using molecular dynamics simulations we examine the effective interactions between two like-charged rods as a function of angle and separation. In particular, we determine how the competing electrostatic repulsions and multivalent-ion-induced attractions depend upon concentrations of simple and multivalent salt. We find that with increasing multivalent salt the stable configuration of two rods e… ▽ More Using molecular dynamics simulations we examine the effective interactions between two like-charged rods as a function of angle and separation. In particular, we determine how the competing electrostatic repulsions and multivalent-ion-induced attractions depend upon concentrations of simple and multivalent salt. We find that with increasing multivalent salt the stable configuration of two rods evolves from isolated rods to aggregated perpendicular rods to aggregated parallel rods; at sufficiently high concentration, additional multivalent salt reduces the attraction. Monovalent salt enhances the attraction near the onset of aggregation, and reduces it at higher concentration of multivalent salt. △ Less

Submitted 18 November, 2003; originally announced November 2003.

Comments: 4 pages, 3 figures, submitted to PRL

Journal ref: Phys. Rev. Lett. 93, 128101 (2004)

Large-scale simulation of adhesion dynamics for end-graphed polymers

Authors: Scott W. Sides, Gary S. Grest, Mark J. Stevens

Abstract: The adhesion between a polymer melt and substrate is studied in the presence of chemically attached chains on the substrate surface. Extensive molecular dynamics simulations have been carried out to study the effect of temperature, tethered chain areal density ($Σ$), tethered chain length ($N_{t}$), chain bending energy ($k_θ$) and tensile pull velocity ($v$) on the adhesive failure mechanisms o… ▽ More The adhesion between a polymer melt and substrate is studied in the presence of chemically attached chains on the substrate surface. Extensive molecular dynamics simulations have been carried out to study the effect of temperature, tethered chain areal density ($Σ$), tethered chain length ($N_{t}$), chain bending energy ($k_θ$) and tensile pull velocity ($v$) on the adhesive failure mechanisms of pullout and/or scission of the tethered chains. We observe a crossover from pure chain pullout to chain scission as $N_{t}$ is increased. Below the glass transition, the value of $N_{t}$ for which this crossover begins approaches the bulk entanglement length $N_{e}$. For the values of $N_{t}$ and $Σ$ used here, no crossover to crazing is observed. △ Less

Submitted 15 August, 2001; originally announced August 2001.

Comments: To be published in Macromolecules. 18 pages of text and 12 GIF figures

Counterion Condensation in Strong, Flexible Polyelectrolytes

Authors: Mark J. Stevens, Steve Plimpton

Abstract: We present results of molecular dynamics simulations of strong, flexible polyelectrolyte chains in solution with added salt. The effect of added salt on the polyelectrolyte chain structure is fully treated for the first time as a function of polymer density. Systems above and below the Manning condensation limit are studied. The chain contraction due to added salt is weaker than expected from si… ▽ More We present results of molecular dynamics simulations of strong, flexible polyelectrolyte chains in solution with added salt. The effect of added salt on the polyelectrolyte chain structure is fully treated for the first time as a function of polymer density. Systems above and below the Manning condensation limit are studied. The chain contraction due to added salt is weaker than expected from simple screening arguments. The chain structure is intimately tied to the ion density near the chain even for chains in the counterion condensation regime. In contradiction to Manning counterion condensation theory, the ion density near the polymer chain depends on the amount of added salt, and above the condensation limit the chains significantly contract due to added salt. △ Less

Submitted 24 December, 1996; originally announced December 1996.

Comments: Revtex, 4 pages, 3 eps figures

Phase Coexistence of a Stockmayer Fluid in an Applied Field

Authors: Mark J. Stevens, Gary S. Grest

Abstract: We examine two aspects of Stockmayer fluids which consists of point dipoles that additionally interact via an attractive Lennard-Jones potential. We perform Monte Carlo simulations to examine the effect of an applied field on the liquid-gas phase coexistence and show that a magnetic fluid phase does exist in the absence of an applied field. As part of the search for the magnetic fluid phase, we pe… ▽ More We examine two aspects of Stockmayer fluids which consists of point dipoles that additionally interact via an attractive Lennard-Jones potential. We perform Monte Carlo simulations to examine the effect of an applied field on the liquid-gas phase coexistence and show that a magnetic fluid phase does exist in the absence of an applied field. As part of the search for the magnetic fluid phase, we perform Gibbs ensemble simulations to determine phase coexistence curves at large dipole moments, $μ$. The critical temperature is found to depend linearly on $μ^2$ for intermediate values of $μ$ beyond the initial nonlinear behavior near $μ=0$ and less than the $μ$ where no liquid-gas phase coexistence has been found. For phase coexistence in an applied field, the critical temperatures as a function of the applied field for two different $μ$ are mapped onto a single curve. The critical densities hardly change as a function of applied field. We also verify that in an applied field the liquid droplets within the two phase coexistence region become elongated in the direction of the field. △ Less

Submitted 17 January, 1995; originally announced January 1995.

Comments: 23 pages, ReVTeX, 7 figures