Differential-phase-shift QKD with practical Mach-Zehnder interferometer
Authors:
Akihiro Mizutani,
Masanori Terashita,
Junya Matsubayashi,
Shogo Mori,
Ibuki Matsukura,
Suzuna Tagawa,
Kiyoshi Tamaki
Abstract:
Differential-phase-shift (DPS) quantum key distribution stands as a promising protocol due to its simple implementation, which can be realized with a train of coherent pulses and a passive measurement unit. Besides, this protocol has the advantage of being robust against imperfections in the light source. Unfortunately, however, as for the measurement unit, existing security proofs put unrealistic…
▽ More
Differential-phase-shift (DPS) quantum key distribution stands as a promising protocol due to its simple implementation, which can be realized with a train of coherent pulses and a passive measurement unit. Besides, this protocol has the advantage of being robust against imperfections in the light source. Unfortunately, however, as for the measurement unit, existing security proofs put unrealistic assumptions on it, which could be security loopholes in actual implementations. In this paper, we enhance the implementation security of the DPS protocol by incorporating a major imperfection in the measurement unit. Specifically, our proof enables us to employ practical beam splitters with a known range of the transmittance rather than the one with exactly $50\%$, as was assumed in the existing security proofs. Our numerical simulations demonstrate that even with fluctuations of $\pm0.5\%$ in the transmittance from the ideal value, the key rate degrades only by a factor of 0.57. This result highlights the feasibility of the DPS protocol with practical measurement setups.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
Fe-FeH Eutectic Melting Curve and the Estimates of Earth's Core Temperature and Composition
Authors:
Shuhei Mita,
Shoh Tagawa,
Kei Hirose,
Nagi Ikuta
Abstract:
Fe and FeH form a binary eutectic system above ~40 GPa. Here we performed melting experiments in a laser-heated diamond-anvil cell (DAC) and obtained the Fe-FeH eutectic melting curve between 52 and 175 GPa. Its extrapolation shows the eutectic temperature to be 4700 K at the inner core boundary (ICB), which is lower than that in Fe-FeSi but is higher than those in the Fe-S, Fe-O, and Fe-C systems…
▽ More
Fe and FeH form a binary eutectic system above ~40 GPa. Here we performed melting experiments in a laser-heated diamond-anvil cell (DAC) and obtained the Fe-FeH eutectic melting curve between 52 and 175 GPa. Its extrapolation shows the eutectic temperature to be 4700 K at the inner core boundary (ICB), which is lower than that in Fe-FeSi but is higher than those in the Fe-S, Fe-O, and Fe-C systems. In addition, its dT/dP slope is comparable to those of the melting curves of Fe and FeH endmembers, suggesting that the eutectic liquid composition changes little with increasing pressure and is about FeH0.6 at the ICB pressure. We also estimated the effect of each light element on depressing the liquidus temperature at 330 GPa based on a combination of binary eutectic temperature and composition and found that the effect is large for C and S, moderate for H and O, and small for Si when considering the amount of each element that reduces a certain percentage of a liquid iron density. Furthermore, we searched for a set of possible outer core liquid composition and ICB temperature (the liquidus temperature of the former at 330 GPa should match the latter), which explains the outer core density deficit that depends on core temperature. The results demonstrate that relatively low core temperatures, lower than the solidus temperature of a pyrolitic lowermost mantle at the core-mantle boundary (CMB), are possible when the core is poor in Si.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.