Showing 1–50 of 179 results for author: Tuthill, P

Heimdallr and Solarstein: alignment, calibration, and correction in the Asgard suite at the VLTI

Authors: Adam K. Taras, J. Gordon Robertson, Josh Carter, Fred Crous, Benjamin Courtney-Barrer, Grace McGinness, Michael Ireland, Peter Tuthill

Abstract: The Asgard instrument suite proposed for the ESO's Very Large Telescope Interferometer (VLTI) brings with it a new generation of instruments for spectroscopy and nulling. Asgard will enable investigations such as measurement of direct stellar masses for Galactic archaeology and direct detection of giant exoplanets to probe formation models using the first nulling interferometer in the southern hem… ▽ More The Asgard instrument suite proposed for the ESO's Very Large Telescope Interferometer (VLTI) brings with it a new generation of instruments for spectroscopy and nulling. Asgard will enable investigations such as measurement of direct stellar masses for Galactic archaeology and direct detection of giant exoplanets to probe formation models using the first nulling interferometer in the southern hemisphere. We present the design and implementation of the Astralis-built Heimdallr, the beam combiner for fringe tracking and stellar interferometry in K band, as well as Solarstein, a novel implementation of a 4-beam telescope simulator for alignment and calibration. In this update, we verify that the Heimdallr design is sufficient to perform diffraction-limited beam combination. Furthermore, we demonstrate that Solarstein presents an interface comparable to the VLTI with co-phased, equal intensity beams, enabling alignment and calibration for all Asgard instruments. In doing so, we share techniques for aligning and implementing large instruments in bulk optics. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Comments: Presented at SPIE Astronomical Telescopes + Instrumentation 2024

CHARA/Silmaril Instrument Software and Data Reduction Pipeline: Characterization of the Instrument in the Lab and On-Sky

Authors: Narsireddy Anugu, Theo A. ten brummelaar, Cyprien Lanthermann, Peter G. Tuthill, Edgar R. Ligon III, Gail H. Schaefer, Douglas R. Gies, Grace Piroscia, Adam Taras, Gerard T. van Belle, Makoto Kishimoto, Marc-Antoine Martinod

Abstract: The newly installed Silmaril beam combiner at the CHARA array is designed to observe previously inaccessible faint targets, including Active Galactic Nuclei and T-Tauri Young Stellar Objects. Silmaril leverages cutting-edge optical design, low readout noise, and a high-speed C-RED1 camera to realize its sensitivity objectives. In this presentation, we offer a comprehensive overview of the instrume… ▽ More The newly installed Silmaril beam combiner at the CHARA array is designed to observe previously inaccessible faint targets, including Active Galactic Nuclei and T-Tauri Young Stellar Objects. Silmaril leverages cutting-edge optical design, low readout noise, and a high-speed C-RED1 camera to realize its sensitivity objectives. In this presentation, we offer a comprehensive overview of the instrument's software, which manages critical functions, including camera data acquisition, fringe tracking, automatic instrument alignment, and observing interfaces, all aimed at optimizing on-sky data collection. Additionally, we offer an outline of the data reduction pipeline, responsible for converting raw instrument data products into the final OIFITS used by the standard interferometry modeling software. The purpose of this paper is to provide a solid reference for studies based on Silmaril data. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Comments: Presented at 2024 SPIE Astronomical Telescopes + Instrumentation conference

Differentiable Optics with dLux II: Optical Design Maximising Fisher Information

Authors: Louis Desdoigts, Benjamin Pope, Michael Gully-Santiago, Peter Tuthill

Abstract: The design of astronomical hardware operating at the diffraction limit requires optimization of physical optical simulations of the instrument with respect to desired figures of merit, such as throughput or astrometric accuracy. These systems can be high dimensional, with highly nonlinear relationships between outputs and the adjustable parameters of the hardware. In this series of papers we prese… ▽ More The design of astronomical hardware operating at the diffraction limit requires optimization of physical optical simulations of the instrument with respect to desired figures of merit, such as throughput or astrometric accuracy. These systems can be high dimensional, with highly nonlinear relationships between outputs and the adjustable parameters of the hardware. In this series of papers we present and apply dLux, an open-source end-to-end differentiable optical modelling framework. Automatic differentiation enables not just efficient high-dimensional optimization of astronomical hardware designs, but also Bayesian experimental design directly targeting the precision of experimental outcomes. Automatic second derivatives enable the exact and numerically stable calculation of parameter covariance forecasts, and higher derivatives of these enable direct optimization of these forecasts. We validate this method against analytic theory and illustrate its utility in evaluating the astrometric precision of a parametrized telescope model, and the design of a diffractive pupil to achieve optimal astrometric performance for exoplanet searches. The source code and tutorial software are open source and publicly available, targeting researchers who may wish to harness dLux for their own optical simulation problems. △ Less

Submitted 16 June, 2024; v1 submitted 12 June, 2024; originally announced June 2024.

Comments: 12 pages, 6 figures

Differentiable Optics with dLux I: Deep calibration of Flat Field and Phase Retrieval with Automatic Differentiation

Authors: Louis Desdoigts, Benjamin Pope, Jordan Dennis, Peter Tuthill

Abstract: The sensitivity limits of space telescopes are imposed by uncalibrated errors in the point spread function, photon-noise, background light, and detector sensitivity. These are typically calibrated with specialized wavefront sensor hardware and with flat fields obtained on the ground or with calibration sources, but these leave vulnerabilities to residual time-varying or non-common path aberrations… ▽ More The sensitivity limits of space telescopes are imposed by uncalibrated errors in the point spread function, photon-noise, background light, and detector sensitivity. These are typically calibrated with specialized wavefront sensor hardware and with flat fields obtained on the ground or with calibration sources, but these leave vulnerabilities to residual time-varying or non-common path aberrations and variations in the detector conditions. It is therefore desirable to infer these from science data alone, facing the prohibitively high dimensional problems of phase retrieval and pixel-level calibration. We introduce a new Python package for physical optics simulation, dLux, which uses the machine learning framework JAX to achieve GPU acceleration and automatic differentiation (autodiff), and apply this to simulating astronomical imaging. In this first of a series of papers, we show that gradient descent enabled by autodiff can be used to simultaneously perform phase retrieval and calibration of detector sensitivity, scaling efficiently to inferring millions of parameters. This new framework enables high dimensional optimization and inference in data analysis and hardware design in astronomy and beyond, which we explore in subsequent papers in this series. △ Less

Submitted 16 June, 2024; v1 submitted 12 June, 2024; originally announced June 2024.

Comments: 13 pages, 6 figures

Journal ref: Journal of Astronomical Telescopes, Instruments, and Systems, Vol. 9, Issue 2, 028007 (June 2023)

The James Webb Interferometer: Space-based interferometric detections of PDS 70 b and c at 4.8 $μ$m

Authors: Dori Blakely, Doug Johnstone, Gabriele Cugno, Anand Sivaramakrishnan, Peter Tuthill, Ruobing Dong, Benjamin J. S. Pope, Loïc Albert, Max Charles, Rachel A. Cooper, Matthew De Furio, Louis Desdoigts, René Doyon, Logan Francis, Alexandra Z. Greenbaum, David Lafrenière, James P. Lloyd, Michael R. Meyer, Laurent Pueyo, Shrishmoy Ray, Joel Sánchez-Bermúdez, Anthony Soulain, Deepashri Thatte, Thomas Vandal

Abstract: We observed the planet-hosting system PDS 70 with the James Webb Interferometer, JWST's Aperture Masking Interferometric (AMI) mode within NIRISS. Observing with the F480M filter centered at 4.8 $μ$m, we simultaneously fit a geometric model to the outer disk and the two known planetary companions. We re-detect the protoplanets PDS 70 b and c at an SNR of 21 and 11, respectively. Our photometry of… ▽ More We observed the planet-hosting system PDS 70 with the James Webb Interferometer, JWST's Aperture Masking Interferometric (AMI) mode within NIRISS. Observing with the F480M filter centered at 4.8 $μ$m, we simultaneously fit a geometric model to the outer disk and the two known planetary companions. We re-detect the protoplanets PDS 70 b and c at an SNR of 21 and 11, respectively. Our photometry of both PDS 70 b and c provide evidence for circumplanetary disk emission through fitting SED models to these new measurements and those found in the literature. We also newly detect emission within the disk gap at an SNR of $\sim$4, at a position angle of $207^{+11}_{-10}$ degrees, and an unconstrained separation within $\sim$200 mas. Follow-up observations will be needed to determine the nature of this emission. We place a 5$σ$ upper limit of $Δ$mag = 7.56 on the contrast of the candidate PDS 70 d at 4.8 $μ$m, which indicates that if the previously observed emission at shorter wavelengths is due to a planet, this putative planet has a different atmospheric composition than PDS 70 b or c. Finally, we place upper limits on emission from any additional planets in the disk gap. We find an azimuthally averaged 5$σ$ upper limit of $Δ$mag $\approx$ 7.5 at separations greater than 125 mas. These are the deepest limits to date within $\sim$250 mas at 4.8 $μ$m and the first space-based interferometric observations of this system. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Comments: Submitted to ApJ

Observing the Galactic Underworld: Predicting photometry and astrometry from compact remnant microlensing events

Authors: David Sweeney, Peter Tuthill, Alberto Krone-Martins, Antoine Mérand, Richard Scalzo, Marc-Antoine Martinod

Abstract: Isolated black holes (BHs) and neutron stars (NSs) are largely undetectable across the electromagnetic spectrum. For this reason, our only real prospect of observing these isolated compact remnants is via microlensing; a feat recently performed for the first time. However, characterisation of the microlensing events caused by BHs and NSs is still in its infancy. In this work, we perform N-body sim… ▽ More Isolated black holes (BHs) and neutron stars (NSs) are largely undetectable across the electromagnetic spectrum. For this reason, our only real prospect of observing these isolated compact remnants is via microlensing; a feat recently performed for the first time. However, characterisation of the microlensing events caused by BHs and NSs is still in its infancy. In this work, we perform N-body simulations to explore the frequency and physical characteristics of microlensing events across the entire sky. Our simulations find that every year we can expect $88_{-6}^{+6}$ BH, $6.8_{-1.6}^{+1.7}$ NS and $20^{+30}_{-20}$ stellar microlensing events which cause an astrometric shift larger than 2~mas. Similarly, we can expect $21_{-3}^{+3}$ BH, $18_{-3}^{+3}$ NS and $7500_{-500}^{+500}$ stellar microlensing events which cause a bump magnitude larger than 1~mag. Leveraging a more comprehensive dynamical model than prior work, we predict the fraction of microlensing events caused by BHs as a function of Einstein time to be smaller than previously thought. Comparison of our microlensing simulations to events in Gaia finds good agreement. Finally, we predict that in the combination of Gaia and GaiaNIR data there will be $14700_{-900}^{+600}$ BH and $1600_{-200}^{+300}$ NS events creating a centroid shift larger than 1~mas and $330_{-120}^{+100}$ BH and $310_{-100}^{+110}$ NS events causing bump magnitudes $> 1$. Of these, $<10$ BH and $5_{-5}^{+10}$ NS events should be detectable using current analysis techniques. These results inform future astrometric mission design, such as GaiaNIR, as they indicate that, compared to stellar events, there are fewer observable BH events than previously thought. △ Less

Submitted 20 May, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Comments: Accepted for publication in MNRAS. 15 pages

Heimdallr, Baldr and Solarstein: designing the next generation of VLTI instruments in the Asgard suite

Authors: Adam K. Taras, J. Gordon Robertson, Fatme Allouche, Benjamin Courtney-Barrer, Josh Carter, Fred Crous, Nick Cvetojevic, Michael Ireland, Stephane Lagarde, Frantz Martinache, Grace McGinness, Mamadou N'Diaye, Sylvie Robbe-Dubois, Peter Tuthill

Abstract: High angular resolution imaging is an increasingly important capability in contemporary astrophysics. Of particular relevance to emerging fields such as the characterisation of exoplanetary systems, imaging at the required spatial scales and contrast levels results in forbidding challenges in the correction of atmospheric phase errors, which in turn drives demanding requirements for precise wavefr… ▽ More High angular resolution imaging is an increasingly important capability in contemporary astrophysics. Of particular relevance to emerging fields such as the characterisation of exoplanetary systems, imaging at the required spatial scales and contrast levels results in forbidding challenges in the correction of atmospheric phase errors, which in turn drives demanding requirements for precise wavefront sensing. Asgard is the next-generation instrument suite at the European Southern Observatory's Very Large Telescope Interferometer (VLTI), targeting advances in sensitivity, spectral resolution and nulling interferometry. In this paper, we describe the requirements and designs of three core modules: Heimdallr, a beam combiner for fringe tracking, low order wavefront correction and visibility science; Baldr, a Zernike wavefront sensor to correct high order atmospheric aberrations; and Solarstein, an alignment and calibration unit. In addition, we draw generalisable insights for designing such system and discuss integration plans. △ Less

Submitted 11 March, 2024; v1 submitted 6 March, 2024; originally announced March 2024.

Comments: 16 pages, 10 figures. Part of the special issue "Optics and Photonics in Sydney"

Journal ref: Appl. Opt. 63, D41-D49 (2024)

CD-27 11535: Evidence for a Triple System in the $β$ Pictoris Moving Group

Authors: Andrew D. Thomas, Eric L. Nielsen, Robert J. De Rosa, Anne E. Peck, Bruce Macintosh, Jeffrey Chilcote, Paul Kalas, Jason J. Wang, Sarah Blunt, Alexandra Greenbaum, Quinn M. Konopacky, Michael J. Ireland, Peter Tuthill, Kimberly Ward-Duong, Lea A. Hirsch, Ian Czekala, Franck Marchis, Christian Marois, Max A. Millar-Blanchaer, William Roberson, Adam Smith, Hannah Gallamore, Jessica Klusmeyer

Abstract: We present new spatially resolved astrometry and photometry of the CD-27 11535 system, a member of the $β$ Pictoris moving group consisting of two resolved K-type stars on a $\sim$20-year orbit. We fit an orbit to relative astrometry measured from NIRC2, GPI, and archival NaCo images, in addition to literature measurements. However, the total mass inferred from this orbit is significantly discrepa… ▽ More We present new spatially resolved astrometry and photometry of the CD-27 11535 system, a member of the $β$ Pictoris moving group consisting of two resolved K-type stars on a $\sim$20-year orbit. We fit an orbit to relative astrometry measured from NIRC2, GPI, and archival NaCo images, in addition to literature measurements. However, the total mass inferred from this orbit is significantly discrepant from that inferred from stellar evolutionary models using the luminosity of the two stars. We explore two hypotheses that could explain this discrepant mass sum; a discrepant parallax measurement from Gaia due to variability, and the presence of an additional unresolved companion to one of the two components. We find that the $\sim$20-year orbit could not bias the parallax measurement, but that variability of the components could produce a large amplitude astrometric motion, an effect which cannot be quantified exactly without the individual Gaia measurements. The discrepancy could also be explained by an additional star in the system. We jointly fit the astrometric and photometric measurements of the system to test different binary and triple architectures for the system. Depending on the set of evolutionary models used, we find an improved goodness of fit for a triple system architecture that includes a low-mass ($M=0.177\pm0.055$\,$M_{\odot}$) companion to the primary star. Further studies of this system will be required in order to resolve this discrepancy, either by refining the parallax measurement with a more complex treatment of variability-induced astrometric motion, or by detecting a third companion. △ Less

Submitted 1 December, 2023; originally announced December 2023.

Comments: 12 pages + references and appendix, 12 figures, 5 tables

Journal ref: AJ 166 246 (2023)

A First Look with JWST Aperture Masking Interferometry (AMI): Resolving Circumstellar Dust around the Wolf-Rayet Binary WR 137 beyond the Rayleigh Limit

Authors: Ryan M. Lau, Matthew J. Hankins, Joel Sanchez-Bermudez, Deepashri Thatte, Anthony Soulain, Rachel A. Cooper, Anand Sivaramakrishnan, Michael F. Corcoran, Alexandra Z. Greenbaum, Theodore R. Gull, Yinuo Han, Olivia C. Jones, Thomas Madura, Anthony F. J. Moffat, Mark R. Morris, Takashi Onaka, Christopher M. P. Russell, Noel D. Richardson, Nathan Smith, Peter Tuthill, Kevin Volk, Gerd Weigelt, Peredur M. Williams

Abstract: We present infrared aperture masking interferometry (AMI) observations of newly formed dust from the colliding winds of the massive binary system Wolf-Rayet (WR) 137 with JWST using the Near Infrared Imager and Slitless Spectrograph (NIRISS). NIRISS AMI observations of WR 137 and a point-spread-function calibrator star, HD~228337, were taken using the F380M and F480M filters in 2022 July and Augus… ▽ More We present infrared aperture masking interferometry (AMI) observations of newly formed dust from the colliding winds of the massive binary system Wolf-Rayet (WR) 137 with JWST using the Near Infrared Imager and Slitless Spectrograph (NIRISS). NIRISS AMI observations of WR 137 and a point-spread-function calibrator star, HD~228337, were taken using the F380M and F480M filters in 2022 July and August as part of the Director's Discretionary Early Release Science (DD-ERS) program 1349. Interferometric observables (squared visibilities and closure phases) from the WR 137 "interferogram" were extracted and calibrated using three independent software tools: ImPlaneIA, AMICAL, and SAMpip. The analysis of the calibrated observables yielded consistent values except for slightly discrepant closure phases measured by ImPlaneIA. Based on all three sets of calibrated observables, images were reconstructed using three independent software tools: BSMEM, IRBis, and SQUEEZE. All reconstructed image combinations generated consistent images in both F380M and F480M filters. The reconstructed images of WR 137 reveal a bright central core with a $\sim300$ mas linear filament extending to the northwest. A geometric colliding-wind model with dust production constrained to the orbital plane of the binary system and enhanced as the system approaches periapsis provided a general agreement with the interferometric observables and reconstructed images. Based on a colliding-wind dust condensation analysis, we suggest that dust formation within the orbital plane of WR 137 is induced by enhanced equatorial mass-loss from the rapidly rotating O9 companion star, whose axis of rotation is aligned with that of the orbit. △ Less

Submitted 22 December, 2023; v1 submitted 27 November, 2023; originally announced November 2023.

Comments: 18 pages, 8 figures, Accepted for publication in ApJ. Updated plotting error in Fig. 2

Nonlinear wavefront reconstruction from a pyramid sensor using neural networks

Authors: Alison P. Wong, Barnaby R. M. Norris, Vincent Deo, Peter G. Tuthill, Richard Scalzo, David Sweeney, Kyohoon Ahn, Julien Lozi, Sebastien Vievard, Olivier Guyon

Abstract: The pyramid wavefront sensor (PyWFS) has become increasingly popular to use in adaptive optics (AO) systems due to its high sensitivity. The main drawback of the PyWFS is that it is inherently nonlinear, which means that classic linear wavefront reconstruction techniques face a significant reduction in performance at high wavefront errors, particularly when the pyramid is unmodulated. In this pape… ▽ More The pyramid wavefront sensor (PyWFS) has become increasingly popular to use in adaptive optics (AO) systems due to its high sensitivity. The main drawback of the PyWFS is that it is inherently nonlinear, which means that classic linear wavefront reconstruction techniques face a significant reduction in performance at high wavefront errors, particularly when the pyramid is unmodulated. In this paper, we consider the potential use of neural networks (NNs) to replace the widely used matrix vector multiplication (MVM) control. We aim to test the hypothesis that the neural network (NN)'s ability to model nonlinearities will give it a distinct advantage over MVM control. We compare the performance of a MVM linear reconstructor against a dense NN, using daytime data acquired on the Subaru Coronagraphic Extreme Adaptive Optics system (SCExAO) instrument. In a first set of experiments, we produce wavefronts generated from 14 Zernike modes and the PyWFS responses at different modulation radii (25, 50, 75, and 100 mas). We find that the NN allows for a far more precise wavefront reconstruction at all modulations, with differences in performance increasing in the regime where the PyWFS nonlinearity becomes significant. In a second set of experiments, we generate a dataset of atmosphere-like wavefronts, and confirm that the NN outperforms the linear reconstructor. The SCExAO real-time computer software is used as baseline for the latter. These results suggest that NNs are well positioned to improve upon linear reconstructors and stand to bring about a leap forward in AO performance in the near future. △ Less

Submitted 5 November, 2023; originally announced November 2023.

Comments: Accepted in Publications of the Astronomical Society of the Pacific, September 2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Authors: Nemanja Jovanovic, Pradip Gatkine, Narsireddy Anugu, Rodrigo Amezcua-Correa, Ritoban Basu Thakur, Charles Beichman, Chad Bender, Jean-Philippe Berger, Azzurra Bigioli, Joss Bland-Hawthorn, Guillaume Bourdarot, Charles M. Bradford, Ronald Broeke, Julia Bryant, Kevin Bundy, Ross Cheriton, Nick Cvetojevic, Momen Diab, Scott A. Diddams, Aline N. Dinkelaker, Jeroen Duis, Stephen Eikenberry, Simon Ellis, Akira Endo, Donald F. Figer , et al. (55 additional authors not shown)

Abstract: Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio… ▽ More Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

Journal ref: J. Phys. Photonics 5 042501 (2023)

The path to detecting extraterrestrial life with astrophotonics

Authors: Nemanja Jovanovic, Yinzi Xin, Michael P. Fitzgerald, Olivier Guyon, Peter Tuthill, Barnaby Norris, Pradip Gatkine, Greg Sercel, Svarun Soda, Yoo Jung Kim, Jonathan Lin, Sergio Leon-Saval, Rodrigo Amezcua-Correa, Stephanos Yerolatsitis, Julien Lozi, Sebastien Vievard, Chris Betters, Steph Sallum, Daniel Levinstein, Dimitri Mawet, Jeffrey Jewell, J. Kent Wallace, Nick Cvetojevic

Abstract: Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far,… ▽ More Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a gaping void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Comments: 9 pages, 2 figures, SPIE Optics and Photonics conference

Report number: 12680-17

From Dust to Nanodust: Resolving Circumstellar Dust from the Colliding-Wind Binary Wolf-Rayet (WR) 140

Authors: Ryan M. Lau, Jason Wang, Matthew J. Hankins, Thayne Currie, Vincent Deo, Izumi Endo, Olivier Guyon, Yinuo Han, Anthony P. Jones, Nemanja Jovanovic, Julien Lozi, Anthony F. J. Moffat, Takashi Onaka, Garreth Ruane, Andreas A. C. Sander, Samaporn Tinyanont, Peter G. Tuthill, Gerd Weigelt, Peredur M. Williams, Sebastien Vievard

Abstract: Wolf-Rayet (WR) 140 is the archetypal periodic dust-forming colliding-wind binary that hosts a carbon-rich WR (WC) star and an O-star companion with an orbital period of 7.93 years and an orbital eccentricity of 0.9. Throughout the past several decades, multiple dust-formation episodes from WR 140 have been observed that are linked to the binary orbit and occur near the time of periastron passage.… ▽ More Wolf-Rayet (WR) 140 is the archetypal periodic dust-forming colliding-wind binary that hosts a carbon-rich WR (WC) star and an O-star companion with an orbital period of 7.93 years and an orbital eccentricity of 0.9. Throughout the past several decades, multiple dust-formation episodes from WR 140 have been observed that are linked to the binary orbit and occur near the time of periastron passage. Given its predictable dust-formation episodes, WR 140 presents an ideal astrophysical laboratory for investigating the formation and evolution of dust in the hostile environment around a massive binary system. In this paper, we present near- and mid-infrared (IR) spectroscopic and imaging observations of WR 140 with Subaru/SCExAO+CHARIS, Keck/NIRC2+PyWFS, and Subaru/COMICS taken between 2020 June and Sept that resolve the circumstellar dust emission linked to its most recent dust-formation episode in 2016 Dec. Our spectral energy distribution (SED) analysis of WR 140's resolved circumstellar dust emission reveals the presence of a hot ($T_\mathrm{d}\sim1000$ K) near-IR dust component that is co-spatial with the previously known and cooler ($T_\mathrm{d}\sim500$ K) mid-IR dust component composed of $300-500$ Å-sized dust grains. We attribute the hot near-IR dust emission to the presence of nano-sized ("nanodust") grains and suggest they were formed from grain-grain collisions or the rotational disruption of the larger grain size population by radiative torques in the strong radiation field from the central binary. Lastly, we speculate on the astrophysical implications of nanodust formation around colliding-wind WC binaries, which may present an early source of carbonaceous nanodust in the interstellar medium. △ Less

Submitted 23 May, 2023; originally announced May 2023.

Comments: 21 pages, 8 figures, Accepted for publication in ApJ

High-angular resolution and high-contrast VLTI observations from Y to L band with the Asgard instrumental suite

Authors: Marc-Antoine Martinod, Denis Defrère, Michael Ireland, Stefan Kraus, Frantz Martinache, Peter Tuthill, Azzurra Bigioli, Julia Bryant, Sorabh Chhabra, Benjamin Courtney-Barrer, Fred Crous, Nick Cvetojevic, Colin Dandumont, Germain Garreau, Tiphaine Lagadec, Romain Laugier, Daniel Mortimer, Barnaby Norris, Gordon Robertson, Adam Taras

Abstract: The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: a… ▽ More The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: an instrumental suite comprised of four natively collaborating instruments: BIFROST, a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; NOTT, a nulling interferometer dedicated to imaging young nearby planetary systems in the L band; HEIMDALLR, an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimiser. These instruments share common goals and technologies. The goals are diverse astrophysical cases such as the study of the formation and evolution processes of binary systems, exoplanetary systems and protoplanetary disks, the characterization of orbital parameters and spin-orbit alignment of multiple systems, the characterization of the exoplanets, and the study of exozodiacal disks. Thus, the idea of this suite is to make the instruments interoperable and complementary to deliver unprecedented sensitivity and accuracy from the J to M bands to meet these goals. The interoperability of the Asgard instruments and their integration in the VLTI are major challenges for this project. △ Less

Submitted 16 January, 2023; originally announced January 2023.

The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope -- IV. Aperture Masking Interferometry

Authors: Anand Sivaramakrishnan, Peter Tuthill, James P. Lloyd, Alexandra Z. Greenbaum, Deepashri Thatte, Rachel A. Cooper, Thomas Vandal, Jens Kammerer, Joel Sanchez-Bermudez, Benjamin J. S. Pope, Dori Blakely, Loïc Albert, Neil J. Cook, Doug Johnstone, André R. Martel, Kevin Volk, Anthony Soulain, Étienne Artigau, David Lafrenière, Chris J. Willott, Sébastien Parmentier, K. E. Saavik Ford, Barry McKernan, M. Begoña Vila, Neil Rowlands , et al. (14 additional authors not shown)

Abstract: The James Webb Space Telescope's Near Infrared Imager and Slitless Spectrograph (JWST-NIRISS) flies a 7-hole non-redundant mask (NRM), the first such interferometer in space, operating at 3-5 \micron~wavelengths, and a bright limit of $\simeq 4$ magnitudes in W2. We describe the NIRISS Aperture Masking Interferometry (AMI) mode to help potential observers understand its underlying principles, pres… ▽ More The James Webb Space Telescope's Near Infrared Imager and Slitless Spectrograph (JWST-NIRISS) flies a 7-hole non-redundant mask (NRM), the first such interferometer in space, operating at 3-5 \micron~wavelengths, and a bright limit of $\simeq 4$ magnitudes in W2. We describe the NIRISS Aperture Masking Interferometry (AMI) mode to help potential observers understand its underlying principles, present some sample science cases, explain its operational observing strategies, indicate how AMI proposals can be developed with data simulations, and how AMI data can be analyzed. We also present key results from commissioning AMI. Since the allied Kernel Phase Imaging (KPI) technique benefits from AMI operational strategies, we also cover NIRISS KPI methods and analysis techniques, including a new user-friendly KPI pipeline. The NIRISS KPI bright limit is $\simeq 8$ W2 magnitudes. AMI (and KPI) achieve an inner working angle of $\sim 70$ mas that is well inside the $\sim 400$ mas NIRCam inner working angle for its circular occulter coronagraphs at comparable wavelengths. △ Less

Submitted 7 November, 2022; v1 submitted 31 October, 2022; originally announced October 2022.

Comments: 30 pages, 10 figures

Radiation-driven acceleration in the expanding WR140 dust shell

Authors: Yinuo Han, Peter G. Tuthill, Ryan M. Lau, Anthony Soulain

Abstract: The Wolf-Rayet (WR) binary system WR140 is a close (0.9-16.7 mas) binary star consisting of an O5 primary and WC7 companion and is known as the archetype of episodic dust-producing WRs. Dust in WR binaries is known to form in a confined stream originating from the collision of the two stellar winds, with orbital motion of the binary sculpting the large-scale dust structure into arcs as dust is swe… ▽ More The Wolf-Rayet (WR) binary system WR140 is a close (0.9-16.7 mas) binary star consisting of an O5 primary and WC7 companion and is known as the archetype of episodic dust-producing WRs. Dust in WR binaries is known to form in a confined stream originating from the collision of the two stellar winds, with orbital motion of the binary sculpting the large-scale dust structure into arcs as dust is swept radially outwards. It is understood that sensitive conditions required for dust production in WR140 are only met around periastron when the two stars are sufficiently close. Here we present multiepoch imagery of the circumstellar dust shell of WR140. We constructed geometric models that closely trace the expansion of the intricately structured dust plume, showing that complex effects induced by orbital modulation may result in a 'Goldilocks zone' for dust production. We find that the expansion of the dust plume cannot be reproduced under the assumption of a simple uniform-speed outflow, finding instead the dust to be accelerating. This constitutes a direct kinematic record of dust motion under acceleration by radiation pressure and further highlights the complexity of the physical conditions in colliding-wind binaries. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: Published in Nature

Journal ref: Nature 610, 269-272 (2022)

Nested Dust Shells around the Wolf-Rayet Binary WR 140 observed with JWST

Authors: Ryan M. Lau, Matthew J. Hankins, Yinuo Han, Ioannis Argyriou, Michael F. Corcoran, Jan J. Eldridge, Izumi Endo, Ori D. Fox, Macarena Garcia Marin, Theodore R. Gull, Olivia C. Jones, Kenji Hamaguchi, Astrid Lamberts, David R. Law, Thomas Madura, Sergey V. Marchenko, Hideo Matsuhara, Anthony F. J. Moffat, Mark R. Morris, Patrick W. Morris, Takashi Onaka, Michael E. Ressler, Noel D. Richardson, Christopher M. P. Russell, Joel Sanchez-Bermudez , et al. (7 additional authors not shown)

Abstract: Massive colliding-wind binaries that host a Wolf-Rayet (WR) star present a potentially important source of dust and chemical enrichment in the interstellar medium (ISM). However, the chemical composition and survival of dust formed from such systems is not well understood. The carbon-rich WR (WC) binary WR~140 presents an ideal astrophysical laboratory for investigating these questions given its w… ▽ More Massive colliding-wind binaries that host a Wolf-Rayet (WR) star present a potentially important source of dust and chemical enrichment in the interstellar medium (ISM). However, the chemical composition and survival of dust formed from such systems is not well understood. The carbon-rich WR (WC) binary WR~140 presents an ideal astrophysical laboratory for investigating these questions given its well-defined orbital period and predictable dust-formation episodes every 7.93 years around periastron passage. We present observations from our Early Release Science program (ERS1349) with the James Webb Space Telescope (JWST) Mid-Infrared Instrument (MIRI) Medium-Resolution Spectrometer (MRS) and Imager that reveal the spectral and spatial signatures of nested circumstellar dust shells around WR~140. MIRI MRS spectroscopy of the second dust shell and Imager detections of over 17 shells formed throughout the past $\gtrsim130$ years confirm the survival of carbonaceous dust grains from WR~140 that are likely carriers of "unidentified infrared" (UIR)-band features at 6.4 and 7.7 $μ$m. The observations indicate that dust-forming WC binaries can enrich the ISM with organic compounds and carbonaceous dust. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: Published in Nature Astronomy on Oct 12, 2022; 21 pages, 5 figures, 2 tables

Journal ref: Lau, R.M., Hankins, M.J., Han, Y. et al. Nested dust shells around the Wolf-Rayet binary WR 140 observed with JWST. Nat Astron (2022)

The Galactic Underworld: The spatial distribution of compact remnants

Authors: David Sweeney, Peter Tuthill, Sanjib Sharma, Ryosuke Hirai

Abstract: We chart the expected Galactic distribution of neutron stars and black holes. These compact remnants of dead stars -- the Galactic underworld -- are found to exhibit a fundamentally different distribution and structure to the visible Galaxy. Compared to the visible Galaxy, concentration into a thin flattened disk structure is much less evident with the scale height more than tripling to 1260 +- 30… ▽ More We chart the expected Galactic distribution of neutron stars and black holes. These compact remnants of dead stars -- the Galactic underworld -- are found to exhibit a fundamentally different distribution and structure to the visible Galaxy. Compared to the visible Galaxy, concentration into a thin flattened disk structure is much less evident with the scale height more than tripling to 1260 +- 30 pc. This difference arises from two primary causes. Firstly, the distribution is in part inherited from the integration over the evolving structure of the Galaxy itself (and hence the changing distribution of the parent stars). Secondly, an even larger effect arises from the natal kick received by the remnant at the event of its supernova birth. Due to this kick we find 30% of remnants have sufficient kinetic energy to entirely escape the Galactic potential (40% of neutron stars and 2% of black holes) leading to a Galactic mass loss integrated to the present day of ~ 0.4% of the stellar mass of the Galaxy. The black hole -- neutron star fraction increases near the Galactic centre: a consequence of smaller kick velocities in the former (the assumption made is that kick velocity is inversely proportional to mass). Our simulated remnant distribution yields probable distances of 19 pc and 21 pc to the nearest neutron star and black hole respectively, while our nearest probable magnetar lies at 4.2 kpc. Although the underworld only contains of order ~ 1% of the Galaxy's mass, observational signatures and physical traces of its population, such as microlensing, will become increasingly present in data ranging from gravitational wave detectors to high precision surveys from space missions such as Gaia. △ Less

Submitted 14 October, 2022; v1 submitted 9 October, 2022; originally announced October 2022.

Comments: 9 pages, 11 figures

Journal ref: Monthly Notices of the Royal Astronomical Society, Volume 516, Issue 4, November 2022, Pages 4971-4979

Achromatic design of a photonic tricoupler and phase shifter for broadband nulling interferometry

Authors: Teresa Klinner-Teo, Marc-Antoine Martinod, Peter Tuthill, Simon Gross, Barnaby Norris, Sergio Leon-Saval

Abstract: Nulling interferometry is one of the most promising technologies for imaging exoplanets within stellar habitable zones. The use of photonics for carrying out nulling interferometry enables the contrast and separation required for exoplanet detection. So far, two key issues limiting current-generation photonic nullers have been identified: phase variations and chromaticity within the beam combiner.… ▽ More Nulling interferometry is one of the most promising technologies for imaging exoplanets within stellar habitable zones. The use of photonics for carrying out nulling interferometry enables the contrast and separation required for exoplanet detection. So far, two key issues limiting current-generation photonic nullers have been identified: phase variations and chromaticity within the beam combiner. The use of tricouplers addresses both limitations, delivering a broadband, achromatic null together with phase measurements for fringe tracking. Here, we present a derivation of the transfer matrix of the tricoupler, including its chromatic behaviour, and our 3D design of a fully symmetric tricoupler, built upon a previous design proposed for the GLINT instrument. It enables a broadband null with symmetric, baseline-phase-dependent splitting into a pair of bright channels when inputs are in anti-phase. Within some design trade space, either the science signal or the fringe tracking ability can be prioritised. We also present a tapered-waveguide $180^\circ$-phase shifter with a phase variation of $0.6^\circ$ in the $1.4-1.7~μ$m band, producing a near-achromatic differential phase between beams{ for optimal operation of the tricoupler nulling stage}. Both devices can be integrated to deliver a deep, broadband null together with a real-time fringe phase metrology signal. △ Less

Submitted 3 October, 2022; originally announced October 2022.

Comments: 20 pages, 17 figures, submitted to Journal of Astronomical Telescopes, Instruments, and Systems

Journal ref: J. Astron. Telesc. Instrum. Syst. 8(4), 045001 (2022)

Controlling petals using fringes: discontinuous wavefront sensing through sparse aperture interferometry at Subaru/SCExAO

Authors: Vincent Deo, Sébastien Vievard, Nick Cvetojevic, Kyohoon Ahn, Elsa Huby, Olivier Guyon, Sylvestre Lacour, Julien Lozi, Frantz Martinache, Barnaby Norris, Nour Skaf, Peter Tuthill

Abstract: Low wind and petaling effects, caused by the discontinuous apertures of telescopes, are poorly corrected -- if at all -- by commonly used workhorse wavefront sensors (WFSs). Wavefront petaling breaks the coherence of the point spread function core, splitting it into several side lobes, dramatically shutting off scientific throughput. We demonstrate the re-purposing of non-redundant sparse aperture… ▽ More Low wind and petaling effects, caused by the discontinuous apertures of telescopes, are poorly corrected -- if at all -- by commonly used workhorse wavefront sensors (WFSs). Wavefront petaling breaks the coherence of the point spread function core, splitting it into several side lobes, dramatically shutting off scientific throughput. We demonstrate the re-purposing of non-redundant sparse aperture masking (SAM) interferometers into low-order WFSs complementing the high-order pyramid WFS, on the SCExAO experimental platform at Subaru Telescope. The SAM far-field interferograms formed from a 7-hole mask are used for direct retrieval of petaling aberrations, which are almost invisible to the main AO loop. We implement a visible light dual-band SAM mode, using two disjoint 25 nm wide channels, that we recombine to overcome the one-lambda ambiguity of fringe-tracking techniques. This enables a control over petaling with sufficient capture range yet without conflicting with coronagraphic modes in the near-infrared. We present on-sky engineering results demonstrating that the design is able to measure petaling well beyond the range of a single-wavelength equivalent design. △ Less

Submitted 6 September, 2022; originally announced September 2022.

Comments: Proc. SPIE 12185 (Adaptive Optics Systems VIII), 285-297

Journal ref: Proc. SPIE 12185 (2022), 285-297

Smoke on the wind: dust nucleation in archetype colliding wind pinwheel WR104

Authors: A. Soulain, A. Lamberts, F. Millour, P. Tuthill, R. M. Lau

Abstract: A handful of binary Wolf-Rayet stars are known to harbour spectacular spiral structures spanning a few hundred AU. These systems host some of the highest dust production rates in the Universe and are therefore interesting candidates to address the origin of the enigmatic dust excess observed across galactic evolution. The substantial interaction between the winds of the Wolf-Rayet star and its com… ▽ More A handful of binary Wolf-Rayet stars are known to harbour spectacular spiral structures spanning a few hundred AU. These systems host some of the highest dust production rates in the Universe and are therefore interesting candidates to address the origin of the enigmatic dust excess observed across galactic evolution. The substantial interaction between the winds of the Wolf-Rayet star and its companion constitutes a unique laboratory to study the mechanisms of dust nucleation in a hostile environment. Using the grid-based $\texttt{RAMSES}$ code, we investigate this problem by performing a 3D hydrodynamic simulation of the inner region of the prototypical spiral nebula around WR104. We then process the $\texttt{RAMSES}$ results using the radiative transfer code $\texttt{RADMC3d}$ to generate a candidate observable scene. This allows us to estimate the geometrical parameters of the shocked region. We link those quantities to the specific chemical pathway for dust nucleation, where the hydrogen-rich companion's wind catalyses dust formation. The scaling laws we derive constitute a unique tool that can be directly compared to observations. Depending on the dust nucleation locus, the velocity field reveals a differential wind speed. Thus, the initial dust speed could be more balanced between the speeds of the two stellar winds ($\sim$1600 km/s). With $\texttt{RADMC3d}$, we provide constraints on the dust nucleation radius for different combinations of dust-to-gas ratio, hydrogen enrichment and dust grain properties. Finally, our models reveal that dust may escape beyond the boundaries of the spiral due to hydrodynamical instabilities in the wind collision zone. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Design of the new CHARA instrument SILMARIL: pushing the sensitivity of a 3-beam combiner in the H- and K-bands

Authors: Cyprien Lanthermann, Theo ten Brummelaar, Peter Tuthill, Marc-Antoine Martinod, E. Robert Ligon, Douglas Gies, Gail Schaefer, Matthew Anderson

Abstract: Optical interferometry is a powerful technique to achieve high angular resolution. However, its main issue is its lack of sensitivity, compared to other observation techniques. Efforts have been made in the previous decade to improve the sensitivity of optical interferometry, with instruments such as PIONIER and GRAVITY at VLTI, or MIRC-X and MYSTIC at CHARA. While those instruments pushed on sens… ▽ More Optical interferometry is a powerful technique to achieve high angular resolution. However, its main issue is its lack of sensitivity, compared to other observation techniques. Efforts have been made in the previous decade to improve the sensitivity of optical interferometry, with instruments such as PIONIER and GRAVITY at VLTI, or MIRC-X and MYSTIC at CHARA. While those instruments pushed on sensitivity, their design focus was not the sensitivity but relative astrometric accuracy, imaging capability, or spectral resolution. Our goal is to build an instrument specifically designed to optimize for sensitivity. This meant focusing our design efforts on different parts of the instrument and investigating new technologies and techniques. First, we make use of the low-noise C-RED One camera using e-APD technology and provided by First Light Imaging, already used in the improvement of sensitivity in recent new instruments. We forego the use of single-mode fibers but still favor an image plane design that offers more sensitivity than a pupil plane layout. We also use a minimum number of optical elements to maximize the throughput of the design, using a long focal length cylindrical mirror. We chose to limit our design to 3 beams, to have the capability to obtain closure phases, but not dilute the incoming flux in more beam combinations. We also use in our design an edge filter to have the capability to observe H- and K-band at the same time. We use a low spectral resolution, allowing for group delay fringe tracking but maximizing the SNR of the fringes for each spectral channel. All these elements will lead to a typical limiting magnitude between 10 and 11 in both H- and K-bands. △ Less

Submitted 27 August, 2022; originally announced August 2022.

Comments: 23 pages, 14 figures, proceeding for SPIE Astronomical Telescopes and Instrumentation 2022

A Visible-light Lyot Coronagraph for SCExAO/VAMPIRES

Authors: Miles Lucas, Michael Bottom, Olivier Guyon, Julien Lozi, Barnaby Norris, Vincent Deo, Sebastien Vievard, Kyohoon Ahn, Nour Skaf, Peter Tuthill

Abstract: We describe the design and initial results from a visible-light Lyot coronagraph for SCExAO/VAMPIRES. The coronagraph is comprised of four hard-edged, partially transmissive focal plane masks with inner working angles of 36 mas, 55 mas, 92 mas, and 129 mas, respectively. The Lyot stop is a reflective, undersized design with a geometric throughput of 65.7%. Our preliminary on-sky contrast is 1e-2 a… ▽ More We describe the design and initial results from a visible-light Lyot coronagraph for SCExAO/VAMPIRES. The coronagraph is comprised of four hard-edged, partially transmissive focal plane masks with inner working angles of 36 mas, 55 mas, 92 mas, and 129 mas, respectively. The Lyot stop is a reflective, undersized design with a geometric throughput of 65.7%. Our preliminary on-sky contrast is 1e-2 at 0.1" to 1e-4 at 0.75" for all mask sizes. The coronagraph was deployed in early 2022 and is available for open use. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Comments: Proceedings of SPIE 2022 Astronomical Instrumentation and Telescopes conference (#12184-163)

High Contrast Imaging at the Photon Noise Limit with WFS-based PSF Calibration

Authors: Olivier Guyon, Barnaby Norris, Marc-Antoine Martinod, Kyohoon Ahn, Vincent Deo, Nour Skaf, Julien Lozi, Sebastien Vievard, Sebastiaan Haffert, Thayne Currie, Jared Males, Alison Wong, Peter Tuthill

Abstract: Speckle Noise is the dominant source of error in high contrast imaging with adaptive optics system. We discuss the potential for wavefront sensing telemetry to calibrate speckle noise with sufficient precision and accuracy so that it can be removed in post-processing of science images acquired by high contrast imaging instruments. In such a self-calibrating system, exoplanet detection would be lim… ▽ More Speckle Noise is the dominant source of error in high contrast imaging with adaptive optics system. We discuss the potential for wavefront sensing telemetry to calibrate speckle noise with sufficient precision and accuracy so that it can be removed in post-processing of science images acquired by high contrast imaging instruments. In such a self-calibrating system, exoplanet detection would be limited by photon noise and be significantly more robust and efficient than in current systems. We show initial laboratory and on-sky tests, demonstrating over short timescale that residual speckle noise is indeed calibrated to an accuracy exceeding readout and photon noise in the high contrast region. We discuss immplications for the design of space and ground high-contrast imaging systems. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Comments: 12 pages, 7 figures, To appear in SPIE Proceedings of Astronomical Telescopes + Instrumentation, 2022. arXiv admin note: text overlap with arXiv:2109.13958

Two Rings and a Marginally Resolved, 5 AU, Disk Around LkCa 15 Identified Via Near Infrared Sparse Aperture Masking Interferometry

Authors: Dori Blakely, Logan Francis, Doug Johnstone, Anthony Soulain, Peter Tuthill, Anthony Cheetham, Joel Sanchez-Bermudez, Anand Sivaramakrishnan, Ruobing Dong, Nienke van der Marel, Rachel Cooper, Arthur Vigan, Faustine Cantalloube

Abstract: Sparse aperture masking interferometry (SAM) is a high resolution observing technique that allows for imaging at and beyond a telescope's diffraction limit. The technique is ideal for searching for stellar companions at small separations from their host star; however, previous analysis of SAM observations of young stars surrounded by dusty disks have had difficulties disentangling planet and exten… ▽ More Sparse aperture masking interferometry (SAM) is a high resolution observing technique that allows for imaging at and beyond a telescope's diffraction limit. The technique is ideal for searching for stellar companions at small separations from their host star; however, previous analysis of SAM observations of young stars surrounded by dusty disks have had difficulties disentangling planet and extended disk emission. We analyse VLT/SPHERE-IRDIS SAM observations of the transition disk LkCa\,15, model the extended disk emission, probe for planets at small separations, and improve contrast limits for planets. We fit geometrical models directly to the interferometric observables and recover previously observed extended disk emission. We use dynamic nested sampling to estimate uncertainties on our model parameters and to calculate evidences to perform model comparison. We compare our extended disk emission models against point source models to robustly conclude that the system is dominated by extended emission within 50 au. We report detections of two previously observed asymmetric rings at $\sim$17 au and $\sim$45 au. The peak brightness location of each model ring is consistent with the previous observations. We also, for the first time with imaging, robustly recover an elliptical Gaussian inner disk, previously inferred via SED fitting. This inner disk has a FWHM of ~5 au and a similar inclination and orientation as the outer rings. Finally, we recover no clear evidence for candidate planets. By modelling the extended disk emission, we are able to place a lower limit on the near infrared companion contrast of at least 1000. △ Less

Submitted 14 April, 2022; originally announced April 2022.

Comments: Accepted for publication in ApJ

Images of Embedded Jovian Planet Formation At A Wide Separation Around AB Aurigae

Authors: Thayne Currie, Kellen Lawson, Glenn Schneider, Wladimir Lyra, John Wisniewski, Carol Grady, Olivier Guyon, Motohide Tamura, Takayuki Kotani, Hajime Kawahara, Timothy Brandt, Taichi Uyama, Takayuki Muto, Ruobing Dong, Tomoyuki Kudo, Jun Hashimoto, Misato Fukagawa, Kevin Wagner, Julien Lozi, Jeffrey Chilcote, Taylor Tobin, Tyler Groff, Kimberly Ward-Duong, William Januszewski, Barnaby Norris , et al. (8 additional authors not shown)

Abstract: Direct images of protoplanets embedded in disks around infant stars provide the key to understanding the formation of gas giant planets like Jupiter. Using the Subaru Telescope and Hubble Space Telescope, we find evidence for a jovian protoplanet around AB Aurigae orbiting at a wide projected separation (93 au), likely responsible for multiple planet-induced features in the disk. Its emission is r… ▽ More Direct images of protoplanets embedded in disks around infant stars provide the key to understanding the formation of gas giant planets like Jupiter. Using the Subaru Telescope and Hubble Space Telescope, we find evidence for a jovian protoplanet around AB Aurigae orbiting at a wide projected separation (93 au), likely responsible for multiple planet-induced features in the disk. Its emission is reproducible as reprocessed radiation from an embedded protoplanet. We also identify two structures located at 430-580 au that are candidate sites of planet formation. These data reveal planet formation in the embedded phase and a protoplanet discovery at wide, > 50 au separations characteristic of most imaged exoplanets. With at least one clump-like protoplanet and multiple spiral arms, the AB Aur system may also provide the evidence for a long-considered alternative to the canonical model for Jupiter's formation: disk (gravitational) instability. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Comments: Author's personal version: 19 pages, 5 Figures, 1 Table; 32 Supplementary pages, 18 Supplementary Figures, 1 Supplementary Table; Accepted for Publication in Nature Astronomy. Published version: https://www.nature.com/articles/s41550-022-01634-x

The James Webb Space Telescope Aperture Masking Interferometer

Authors: A. Soulain, A. Sivaramakrishnan, P. Tuthill, D. Thatte, K. Volk, R. Cooper, L. Albert, É. Artigau, N. Cook, R. Doyon, D. Johnstone, D. Lafrenière, A. Martel

Abstract: In less than a year, the James Webb Space Telescope (JWST) will inherit the mantle of being the world's pre-eminent infrared observatory. JWST will carry with it an Aperture Masking Interferometer (AMI) as one of the supported operational modes of the Near-InfraRed Imager and Slitless Spectrograph (NIRISS) instrument. Aboard such a powerful platform, the AMI mode will deliver the most advanced and… ▽ More In less than a year, the James Webb Space Telescope (JWST) will inherit the mantle of being the world's pre-eminent infrared observatory. JWST will carry with it an Aperture Masking Interferometer (AMI) as one of the supported operational modes of the Near-InfraRed Imager and Slitless Spectrograph (NIRISS) instrument. Aboard such a powerful platform, the AMI mode will deliver the most advanced and scientifically capable interferometer ever launched into space, exceeding anything that has gone before it by orders of magnitude in sensitivity. Here we present key aspects of the design and commissioning of this facility: data simulations ($\texttt{ami_sim}$), the extraction of interferometeric observables using two different approaches ($\texttt{IMPLANEIA}$ and $\texttt{AMICAL}$), an updated view of AMI's expected performance, and our reference star vetting programs. △ Less

Submitted 5 January, 2022; originally announced January 2022.

Comments: 18 pages, 10 figures, invited paper conference

Journal ref: Proceedings of the SPIE, Volume 11446, id. 1144611 18 pp. (2020)

High contrast imaging at the photon noise limit with self-calibrating WFS/C systems

Authors: Olivier Guyon, Barnaby Norris, Marc-Antoine Martinod, Kyohoon Ahn, Peter Tuthill, Jared Males, Alison Wong, Nour Skaf, Thayne Currie, Kelsey Miller, Steven P. Bos, Julien Lozi, Vincent Deo, Sebastien Vievard, Ruslan Belikov, Kyle van Gorkom, Benjamin Mazin, Michael Bottom, Richard Frazin, Alexander Rodack, Tyler Groff, Nemanja Jovanovic, Frantz Martinache

Abstract: High contrast imaging (HCI) systems rely on active wavefront control (WFC) to deliver deep raw contrast in the focal plane, and on calibration techniques to further enhance contrast by identifying planet light within the residual speckle halo. Both functions can be combined in an HCI system and we discuss a path toward designing HCI systems capable of calibrating residual starlight at the fundamen… ▽ More High contrast imaging (HCI) systems rely on active wavefront control (WFC) to deliver deep raw contrast in the focal plane, and on calibration techniques to further enhance contrast by identifying planet light within the residual speckle halo. Both functions can be combined in an HCI system and we discuss a path toward designing HCI systems capable of calibrating residual starlight at the fundamental contrast limit imposed by photon noise. We highlight the value of deploying multiple high-efficiency wavefront sensors (WFSs) covering a wide spectral range and spanning multiple optical locations. We show how their combined information can be leveraged to simultaneously improve WFS sensitivity and residual starlight calibration, ideally making it impossible for an image plane speckle to hide from WFS telemetry. We demonstrate residual starlight calibration in the laboratory and on-sky, using both a coronagraphic setup, and a nulling spectro-interferometer. In both case, we show that bright starlight can calibrate residual starlight. △ Less

Submitted 4 October, 2021; v1 submitted 28 September, 2021; originally announced September 2021.

Comments: 11 pages, 6 Figures, 1 Table; Proc. SPIE in press

Learning the Lantern: Neural network applications to broadband photonic lantern modelling

Authors: David Sweeney, Barnaby R. M. Norris, Peter Tuthill, Richard Scalzo, Jin Wei, Christopher H. Betters, Sergio G. Leon-Saval

Abstract: Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can b… ▽ More Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can bridge the disparate opto-electronic systems, and when trained can achieve a speed-up of over 5 orders of magnitude. We show that this approach can be used to model photonic lanterns with manufacturing defects as well as successfully generalising to polychromatic data. We demonstrate two uses of these neural network models, propagating seeing through the photonic lantern as well as performing global optimisation for purposes such as photonic lantern funnels and photonic lantern nullers. △ Less

Submitted 30 August, 2021; originally announced August 2021.

Comments: 20 pages, 14 figures

Journal ref: Journal of Astronomical Telescopes, Instruments, and Systems. 7(2) (2021) 1-20

Phase Retrieval and Design with Automatic Differentiation

Authors: Alison Wong, Benjamin Pope, Louis Desdoigts, Peter Tuthill, Barnaby Norris, Chris Betters

Abstract: The principal limitation in many areas of astronomy, especially for directly imaging exoplanets, arises from instability in the point spread function (PSF) delivered by the telescope and instrument. To understand the transfer function, it is often necessary to infer a set of optical aberrations given only the intensity distribution on the sensor - the problem of phase retrieval. This can be import… ▽ More The principal limitation in many areas of astronomy, especially for directly imaging exoplanets, arises from instability in the point spread function (PSF) delivered by the telescope and instrument. To understand the transfer function, it is often necessary to infer a set of optical aberrations given only the intensity distribution on the sensor - the problem of phase retrieval. This can be important for post-processing of existing data, or for the design of optical phase masks to engineer PSFs optimized to achieve high contrast, angular resolution, or astrometric stability. By exploiting newly efficient and flexible technology for automatic differentiation, which in recent years has undergone rapid development driven by machine learning, we can perform both phase retrieval and design in a way that is systematic, user-friendly, fast, and effective. By using modern gradient descent techniques, this converges efficiently and is easily extended to incorporate constraints and regularization. We illustrate the wide-ranging potential for this approach using our new package, Morphine. Challenging applications performed with this code include precise phase retrieval for both discrete and continuous phase distributions, even where information has been censored such as heavily-saturated sensor data. We also show that the same algorithms can optimize continuous or binary phase masks that are competitive with existing best solutions for two example problems: an Apodizing Phase Plate (APP) coronagraph for exoplanet direct imaging, and a diffractive pupil for narrow-angle astrometry. The Morphine source code and examples are available open-source, with a similar interface to the popular physical optics package Poppy. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Achromatic photonic tricouplers for application in nulling interferometry

Authors: Marc-Antoine Martinod, Peter Tuthill, Simon Gross, Barnaby Norris, David Sweeney, Michael J. Withford

Abstract: Integrated-optic components are being increasingly used in astrophysics, mainly where accuracy and precision are paramount. One such emerging technology is nulling interferometry that targets high contrast and high angular resolution. Two of the most critical limitations encountered by nullers are rapid phase fluctuations in the incoming light causing instability in the interference and chromatici… ▽ More Integrated-optic components are being increasingly used in astrophysics, mainly where accuracy and precision are paramount. One such emerging technology is nulling interferometry that targets high contrast and high angular resolution. Two of the most critical limitations encountered by nullers are rapid phase fluctuations in the incoming light causing instability in the interference and chromaticity of the directional couplers that prevent a deep broadband interferometric null. We explore the use of a tricoupler designed by ultrafast laser inscription that solves both issues. Simulations of a tricoupler, incorporated into a nuller, result in order of a magnitude improvement in null depth. △ Less

Submitted 1 June, 2021; originally announced June 2021.

Comments: 12 pages, 6 figures, 1 table, Accepted in Applied Optics

Building hybridized 28-baseline pupil-remapping photonic interferometers for future high resolution imaging

Authors: Nick Cvetojevic, Barnaby R. M. Norris, Simon Gross, Nemanja Jovanovic, Alexander Arriola, Sylvestre Lacour, Takayuki Kotani, Jon S. Lawrence, Michael J. Withford, Peter Tuthill

Abstract: One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming ELT generation of telescopes currently under construction. We demonstrate the fabrication and characterization… ▽ More One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming ELT generation of telescopes currently under construction. We demonstrate the fabrication and characterization of a novel hybridized photonic interferometer, with 8 simultaneous inputs, forming 28 baselines, the largest amount to-date. Utilizing different photonic fabrication technologies, we combine a 3D pupil remapper with a planar 8-port ABCD pairwise beam combiner, along with the injection optics necessary for telescope use, into a single integrated monolithic device. We successfully realized a combined device called Dragonfly, which demonstrates a raw instrumental closure-phase stability down to $0.9^{\circ}$ over $8π$ phase piston error, relating to a detection contrast of $\sim6.5\times 10^{-4}$ on an Adaptive-Optics corrected 8-m telescope. This prototype successfully demonstrates advanced hybridization and packaging techniques necessary for on-sky use for high-contrast detection at small inner working angles, ideally complementing what can currently be achieved using coronagraphs. △ Less

Submitted 4 May, 2021; originally announced May 2021.

Comments: 10 pages, 10 figures, 1 table, submitted to Astrophotonics Special Issue in Applied Optics

Journal ref: Appl. Opt. 60, D33-D42 (2021)

First light of a holographic aperture mask: Observation at the Keck OSIRIS Imager

Authors: David S. Doelman, Joost P. Wardenier, Peter Tuthill, Michael P. Fitzgerald, Jim Lyke, Steph Sallum, Barnaby Norris, N. Zane Warriner, Christoph Keller, Michael J. Escuti, Frans Snik

Abstract: We report on the design, construction, and commissioning of a prototype aperture masking technology implemented at the Keck OSIRIS Imager: the holographic aperture mask. Holographic aperture masking (HAM) aims at (i) increasing the throughput of sparse aperture masking (SAM) by selectively combining all subapertures across a telescope pupil in multiple interferograms using a phase mask, and (ii) a… ▽ More We report on the design, construction, and commissioning of a prototype aperture masking technology implemented at the Keck OSIRIS Imager: the holographic aperture mask. Holographic aperture masking (HAM) aims at (i) increasing the throughput of sparse aperture masking (SAM) by selectively combining all subapertures across a telescope pupil in multiple interferograms using a phase mask, and (ii) adding low-resolution spectroscopic capabilities. Using liquid-crystal geometric phase patterns, we manufacture a HAM mask that uses an 11-hole SAM design as the central component and a holographic component comprising 19 different subapertures. Thanks to a multilayer liquid-crystal implementation, the mask has a diffraction efficiency higher than 96% from 1.1 to 2.5 micron. We create a pipeline that extracts monochromatic closure phases from the central component as well as multiwavelength closure phases from the holographic component. We test the performance of the HAM mask in the laboratory and on-sky. The holographic component yields 26 closure phases with spectral resolutions between R$\sim$6.5 and R$\sim$15. On April 19, 2019, we observed the binary star HDS 1507 in the Hbb filter ($λ_0 = 1638$ nm and $Δλ= 330$ nm) and retrieved a constant separation of 120.9 $\pm 0.5$ mas for the independent wavelength bins, which is in excellent agreement with literature values. For both the laboratory measurements and the observations of unresolved reference stars, we recorded nonzero closure phases -- a potential source of systematic error that we traced to polarization leakage of the HAM optic. We propose a future upgrade that improves the performance, reducing this effect to an acceptable level. Holographic aperture masking is a simple upgrade of SAM with increased throughput and a new capability of simultaneous low-resolution spectroscopy that provides new differential observables. △ Less

Submitted 22 April, 2021; originally announced April 2021.

Comments: 17 pages, 21 figures, 7 tables, accepted for publication in A&A

Journal ref: A&A 649, A168 (2021)

AU-scale radio imaging of the wind collision region in the brightest and most luminous non-thermal colliding wind binary Apep

Authors: B. Marcote, J. R. Callingham, M. De Becker, P. G. Edwards, Y. Han, R. Schulz, J. Stevens, P. G. Tuthill

Abstract: The recently discovered colliding-wind binary (CWB) Apep has been shown to emit luminously from radio to X-rays, with the emission driven by a binary composed of two Wolf-Rayet (WR) stars of one carbon-sequence (WC8) and one nitrogen-sequence (WN4-6b). Mid-infrared imaging revealed a giant spiral dust plume that is reminiscent of a pinwheel nebula but with additional features that suggest Apep is… ▽ More The recently discovered colliding-wind binary (CWB) Apep has been shown to emit luminously from radio to X-rays, with the emission driven by a binary composed of two Wolf-Rayet (WR) stars of one carbon-sequence (WC8) and one nitrogen-sequence (WN4-6b). Mid-infrared imaging revealed a giant spiral dust plume that is reminiscent of a pinwheel nebula but with additional features that suggest Apep is a unique system. We have conducted observations with the Australian Long Baseline Array to resolve Apep's radio emission on milliarcsecond scales, allowing us to relate the geometry of the wind-collision region to that of the spiral plume. The observed radio emission shows a bow-shaped structure, confirming its origin as a wind-collision region. The shape and orientation of this region is consistent with being originated by the two stars and with being likely dominated by the stronger wind of the WN4-6b star. This shape allowed us to provide a rough estimation of the opening angle of $\sim 150^\circ$ assuming ideal conditions. The orientation and opening angle of the emission also confirms it as the basis for the spiral dust plume. We also provide estimations for the two stars in the system to milliarcsecond precision. The observed radio emission, one order of magnitude brighter and more luminous than any other known non-thermal radio-emitting CWB, confirms it is produced by an extremely powerful wind collision. Such a powerful wind-collision region is consistent with Apep being a binary composed of two WR stars, so far the first unambiguously confirmed system of its kind. △ Less

Submitted 11 December, 2020; originally announced December 2020.

Comments: 9 pages, 3 figures, accepted for publication in MNRAS

Kernel Phase and Coronagraphy with Automatic Differentiation

Authors: Benjamin J. S. Pope, Laurent Pueyo, Yinzi Xin, Peter G. Tuthill

Abstract: The accumulation of aberrations along the optical path in a telescope produces distortions and speckles in the resulting images, limiting the performance of cameras at high angular resolution. It is important to achieve the highest possible sensitivity to faint sources such as planets, using both hardware and data analysis software. While analytic methods are efficient, real systems are better-mod… ▽ More The accumulation of aberrations along the optical path in a telescope produces distortions and speckles in the resulting images, limiting the performance of cameras at high angular resolution. It is important to achieve the highest possible sensitivity to faint sources such as planets, using both hardware and data analysis software. While analytic methods are efficient, real systems are better-modelled numerically, but such models with many parameters can be hard to understand, optimize and apply. Automatic differentiation software developed for machine learning now makes calculating derivatives with respect to aberrations straightforward for arbitrary optical systems. We apply this powerful new tool to enhance high-angular-resolution astronomical imaging. Self-calibrating observables such as the 'closure phase' or 'bispectrum' have been widely used in optical and radio astronomy to mitigate optical aberrations and achieve high-fidelity imagery. Kernel phases are a generalization of closure phases in the limit of small phase errors. Using automatic differentiation, we reproduce existing kernel phase theory within this framework and demonstrate an extension to the Lyot coronagraph, finding self-calibrating combinations of speckles which are resistant to phase noise, but only in the very high-wavefront-quality regime. As an illustrative example, we reanalyze Palomar adaptive optics observations of the binary alpha Ophiuchi, finding consistency between the new pipeline and the existing standard. We present a new Python package 'morphine' that incorporates these ideas, with an interface similar to the popular package poppy, for optical simulation with automatic differentiation. These methods may be useful for designing improved astronomical optical systems by gradient descent. △ Less

Submitted 19 November, 2020; originally announced November 2020.

Comments: Accepted ApJ

High-contrast H$α$ imaging with Subaru/SCExAO+VAMPIRES

Authors: Taichi Uyama, Barnaby Norris, Nemanja Jovanovic, Julien Lozi, Peter Tuthill, Olivier Guyon, Tomoyuki Kudo, Jun Hashimoto, Motohide Tamura, Frantz Martinache

Abstract: We present current status of H$α$ high-contrast imaging observations with Subaru/SCExAO+VAMPIRES. Our adaptive optics correction at optical wavelengths in combination with (double) spectral differential imaging (SDI) and angular differential imaging (ADI) was capable of detecting a ring-like feature around omi Cet and the H$α$ counterpart of jet around RY Tau. We tested the post-processing by chan… ▽ More We present current status of H$α$ high-contrast imaging observations with Subaru/SCExAO+VAMPIRES. Our adaptive optics correction at optical wavelengths in combination with (double) spectral differential imaging (SDI) and angular differential imaging (ADI) was capable of detecting a ring-like feature around omi Cet and the H$α$ counterpart of jet around RY Tau. We tested the post-processing by changing the order of ADI and SDI and both of the contrast limits achieved $\sim10^{-3}-5\times10^{-4}$ at $0.3^{\prime\prime}$, which is comparable to other H$α$ high-contrast imaging instruments in the southern hemisphere such as VLT/SPHERE, VLT/MUSE, and MagAO. Subaru/VAMPIRES provides great opportunities for H$α$ high-contrast imaging for northern hemisphere targets. △ Less

Submitted 19 October, 2020; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: 30 pages, 14 figures, accepted for publication in JATIS

The extreme colliding-wind system Apep: resolved imagery of the central binary and dust plume in the infrared

Authors: Y. Han, P. G. Tuthill, R. M. Lau, A. Soulain, J. R. Callingham, P. M. Williams, P. A. Crowther, B. J. S. Pope, B. Marcote

Abstract: The recent discovery of a spectacular dust plume in the system 2XMM J160050.7-514245 (referred to as "Apep") suggested a physical origin in a colliding-wind binary by way of the "Pinwheel" mechanism. Observational data pointed to a hierarchical triple-star system, however several extreme and unexpected physical properties seem to defy the established physics of such objects. Most notably, a stark… ▽ More The recent discovery of a spectacular dust plume in the system 2XMM J160050.7-514245 (referred to as "Apep") suggested a physical origin in a colliding-wind binary by way of the "Pinwheel" mechanism. Observational data pointed to a hierarchical triple-star system, however several extreme and unexpected physical properties seem to defy the established physics of such objects. Most notably, a stark discrepancy was found in the observed outflow speed of the gas as measured spectroscopically in the line-of-sight direction compared to the proper motion expansion of the dust in the sky plane. This enigmatic behaviour arises at the wind base within the central Wolf-Rayet binary: a system that has so far remained spatially unresolved. Here we present an updated proper motion study deriving the expansion speed of Apep's dust plume over a two-year baseline that is four times slower than the spectroscopic wind speed, confirming and strengthening the previous finding. We also present the results from high-angular-resolution near-infrared imaging studies of the heart of the system, revealing a close binary with properties matching a Wolf-Rayet colliding-wind system. Based on these new observational constraints, an improved geometric model is presented yielding a close match to the data, constraining the orbital parameters of the Wolf-Rayet binary and lending further support to the anisotropic wind model. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Comments: This article has been accepted for publication in the Monthly Notices of the Royal Astronomical Society. 17 pages, 9 figures, 6 tables

Resolving Decades of Periodic Spirals from the Wolf-Rayet Dust Factory WR 112

Authors: Ryan M. Lau, Matthew J. Hankins, Yinuo Han, Izumi Endo, Anthony F. J. Moffat, Michael E. Ressler, Itsuki Sakon, Joel Sanchez-Bermudez, Anthony Soulain, Ian R. Stevens, Peter G. Tuthill, Peredur M. Williams

Abstract: WR 112 is a dust-forming carbon-rich Wolf-Rayet (WC) binary with a dusty circumstellar nebula that exhibits a complex asymmetric morphology, which traces the orbital motion and dust formation in the colliding winds of the central binary. Unraveling the complicated circumstellar dust emission around WR 112 therefore provides an opportunity to understand the dust formation process in colliding-wind… ▽ More WR 112 is a dust-forming carbon-rich Wolf-Rayet (WC) binary with a dusty circumstellar nebula that exhibits a complex asymmetric morphology, which traces the orbital motion and dust formation in the colliding winds of the central binary. Unraveling the complicated circumstellar dust emission around WR 112 therefore provides an opportunity to understand the dust formation process in colliding-wind WC binaries. In this work, we present a multi-epoch analysis of the circumstellar dust around WR 112 using seven high spatial resolution (FWHM $\sim0.3-0.4''$) N-band ($λ\sim12$ $μ$m) imaging observations spanning almost 20 years and includes newly obtained images from Subaru/COMICS in Oct 2019. In contrast to previous interpretations of a face-on spiral morphology, we observe clear evidence of proper motion of the circumstellar dust around WR 112 consistent with a nearly edge-on spiral with a $θ_s=55^\circ$ half-opening angle and a $\sim20$-yr period. The revised near edge-on geometry of WR 112 reconciles previous observations of highly variable non-thermal radio emission that was inconsistent with a face-on geometry. We estimate a revised distance to WR 112 of $d = 3.39^{+0.89}_{-0.84}$ kpc based on the observed dust expansion rate and a spectroscopically derived WC terminal wind velocity of $v_\infty= 1230\pm260$ km s$^{-1}$. With the newly derived WR 112 parameters we fit optically-thin dust spectral energy distribution models and determine a dust production rate of $\dot{M}_d=2.7^{+1.0}_{-1.3}\times10^{-6}$ M$_\odot$ yr$^{-1}$, which demonstrates that WR 112 is one of the most prolific dust-making WC systems known. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comments: 17 pages, 9 figures, 1 animated gif, accepted for publication in ApJ

Periodic Astrometric Signal Recovery through Convolutional Autoencoders

Authors: Michele Delli Veneri, Louis Desdoigts, Morgan A. Schmitz, Alberto Krone-Martins, Emille E. O. Ishida, Peter Tuthill, Rafael S. de Souza, Richard Scalzo, Massimo Brescia, Giuseppe Longo, Antonio Picariello

Abstract: Astrometric detection involves a precise measurement of stellar positions, and is widely regarded as the leading concept presently ready to find earth-mass planets in temperate orbits around nearby sun-like stars. The TOLIMAN space telescope[39] is a low-cost, agile mission concept dedicated to narrow-angle astrometric monitoring of bright binary stars. In particular the mission will be optimised… ▽ More Astrometric detection involves a precise measurement of stellar positions, and is widely regarded as the leading concept presently ready to find earth-mass planets in temperate orbits around nearby sun-like stars. The TOLIMAN space telescope[39] is a low-cost, agile mission concept dedicated to narrow-angle astrometric monitoring of bright binary stars. In particular the mission will be optimised to search for habitable-zone planets around Alpha Centauri AB. If the separation between these two stars can be monitored with sufficient precision, tiny perturbations due to the gravitational tug from an unseen planet can be witnessed and, given the configuration of the optical system, the scale of the shifts in the image plane are about one millionth of a pixel. Image registration at this level of precision has never been demonstrated (to our knowledge) in any setting within science. In this paper we demonstrate that a Deep Convolutional Auto-Encoder is able to retrieve such a signal from simplified simulations of the TOLIMAN data and we present the full experimental pipeline to recreate out experiments from the simulations to the signal analysis. In future works, all the more realistic sources of noise and systematic effects present in the real-world system will be injected into the simulations. △ Less

Submitted 24 June, 2020; originally announced June 2020.

Comments: Preprint version of the manuscript to appear in the Volume "Intelligent Astrophysics" of the series "Emergence, Complexity and Computation", Book eds. I. Zelinka, D. Baron, M. Brescia, Springer Nature Switzerland, ISSN: 2194-7287

Two Wolf-Rayet stars at the heart of colliding-wind binary Apep

Authors: J. R. Callingham, P. A. Crowther, P. M. Williams, P. G. Tuthill, Y. Han, B. J. S. Pope, B. Marcote

Abstract: Infrared imaging of the colliding-wind binary Apep has revealed a spectacular dust plume with complicated internal dynamics that challenges standard colliding-wind binary physics. Such challenges can be potentially resolved if a rapidly-rotating Wolf-Rayet star is located at the heart of the system, implicating Apep as a Galactic progenitor system to long-duration gamma-ray bursts. One of the diff… ▽ More Infrared imaging of the colliding-wind binary Apep has revealed a spectacular dust plume with complicated internal dynamics that challenges standard colliding-wind binary physics. Such challenges can be potentially resolved if a rapidly-rotating Wolf-Rayet star is located at the heart of the system, implicating Apep as a Galactic progenitor system to long-duration gamma-ray bursts. One of the difficulties in interpreting the dynamics of Apep is that the spectral composition of the stars in the system was unclear. Here we present visual to near-infrared spectra that demonstrate that the central component of Apep is composed of two classical Wolf-Rayet stars of carbon- (WC8) and nitrogen-sequence (WN4-6b) subtypes. We argue that such an assignment represents the strongest case of a classical WR+WR binary system in the Milky Way. The terminal line-of-sight wind velocities of the WC8 and WN4-6b stars are measured to be $2100 \pm 200$ and $3500 \pm 100$ km s$^{-1}$, respectively. If the mass-loss rate of the two stars are typical for their spectral class, the momentum ratio of the colliding winds is expected to be $\approx$ 0.4. Since the expansion velocity of the dust plume is significantly smaller than either of the measured terminal velocities, we explore the suggestion that one of the Wolf-Rayet winds is anisotropic. We can recover a shock-compressed wind velocity consistent with the observed dust expansion velocity if the WC8 star produces a significantly slow equatorial wind with a velocity of $\approx$530 km s$^{-1}$. Such slow wind speeds can be driven by near-critical rotation of a Wolf-Rayet star. △ Less

Submitted 1 May, 2020; originally announced May 2020.

Comments: Accepted for publication in MNRAS, 10 pages, 9 figures, 1 table

Microlensing and Photon Bunching: The impact of decoherence

Authors: Geraint F. Lewis, Peter Tuthill

Abstract: Gravitational microlensing within the Galaxy offers the prospect of probing the details of distant stellar sources, as well as revealing the distribution of compact (and potentially non-luminous) masses along the line-of-sight. Recently, it has been suggested that additional constraints on the lensing properties can be determined through the measurement of the time delay between images through the… ▽ More Gravitational microlensing within the Galaxy offers the prospect of probing the details of distant stellar sources, as well as revealing the distribution of compact (and potentially non-luminous) masses along the line-of-sight. Recently, it has been suggested that additional constraints on the lensing properties can be determined through the measurement of the time delay between images through the correlation of the bunching of photon arrival times; an application of the Hanbury-Brown Twiss effect. In this paper, we revisit this analysis, examining the impact of decoherence of the radiation from a spatially extended source along the multiple paths to an observer. The result is that, for physically reasonable situations, such decoherence completely erases any correlation that could otherwise be used to measure the gravitational lensing time delay. Indeed, the divergent light paths traverse extremely long effective baselines at the lens plane, corresponding to extremes of angular resolving power well beyond those attainable with any terrestrial technologies; the drawback being that few conceivable celestial objects would be sufficiently compact with high enough surface brightness to yield usable signals. △ Less

Submitted 4 December, 2019; originally announced December 2019.

Comments: 4 pages, 1 figure, accepted for publication in MNRAS

Report number: GFL-001

First on-sky demonstration of an integrated-photonic nulling-interferometer: The GLINT instrument

Authors: Barnaby R. M. Norris, Nick Cvetojevic, Tiphaine Lagadec, Nemanja Jovanovic, Simon Gross, Alexander Arriola, Thomas Gretzinger, Marc-Antoine Martinod, Olivier Guyon, Julien Lozi, Michael J. Withford, Jon S. Lawrence, Peter Tuthill

Abstract: The characterisation of exoplanets is critical to understanding planet diversity and formation, their atmospheric composition and the potential for life. This endeavour is greatly enhanced when light from the planet can be spatially separated from that of the host star. One potential method is nulling interferometry, where the contaminating starlight is removed via destructive interference. The GL… ▽ More The characterisation of exoplanets is critical to understanding planet diversity and formation, their atmospheric composition and the potential for life. This endeavour is greatly enhanced when light from the planet can be spatially separated from that of the host star. One potential method is nulling interferometry, where the contaminating starlight is removed via destructive interference. The GLINT instrument is a photonic nulling interferometer with novel capabilities that has now been demonstrated in on-sky testing. The instrument fragments the telescope pupil into sub-apertures that are injected into waveguides within a single-mode photonic chip. Here, all requisite beam splitting, routing and recombination is performed using integrated photonic components. We describe the design, construction and laboratory testing of our GLINT pathfinder instrument. We then demonstrate the efficacy of this method on sky at the Subaru Telescope, achieving a null-depth precision on sky of $\sim10^{-4}$ and successfully determining the angular diameter of stars (via their null-depth measurements) to milli-arcsecond accuracy. A statistical method for analysing such data is described, along with an outline of the next steps required to deploy this technique for cutting-edge science. △ Less

Submitted 21 November, 2019; originally announced November 2019.

The inner dust shell of Betelgeuse detected by polarimetric aperture-masking interferometry

Authors: X. Haubois, B. Norris, P. G. Tuthill, C. Pinte, P. Kervella, J. H. Girard, N. M. Kostogryz, S. V. Berdyugina, G. Perrin, S. Lacour, A. Chiavassa, S. T. Ridgway

Abstract: Theory surrounding the origin of the dust-laden winds from evolved stars remains mired in controversy. Characterizing the formation loci and the dust distribution within approximately the first stellar radius above the surface is crucial for understanding the physics that underlie the mass-loss phenomenon. By exploiting interferometric polarimetry, we derive the fundamental parameters that govern… ▽ More Theory surrounding the origin of the dust-laden winds from evolved stars remains mired in controversy. Characterizing the formation loci and the dust distribution within approximately the first stellar radius above the surface is crucial for understanding the physics that underlie the mass-loss phenomenon. By exploiting interferometric polarimetry, we derive the fundamental parameters that govern the dust structure at the wind base of a red supergiant. We present near-infrared aperture-masking observations of Betelgeuse in polarimetric mode obtained with the NACO/SAMPol instrument. We used both parametric models and radiative transfer simulations to predict polarimetric differential visibility data and compared them to SPHERE/ZIMPOL measurements. Using a thin dust shell model, we report the discovery of a dust halo that is located at only 0.5 R$_{\star}$ above the photosphere (i.e. an inner radius of the dust halo of 1.5 R$_{\star}$). By fitting the data under the assumption of Mie scattering, we estimate the grain size and density for various dust species. By extrapolating to the visible wavelengths using radiative transfer simulations, we compare our model with SPHERE/ZIMPOL data and find that models based on dust mixtures that are dominated by forsterite are most favored. Such a close dusty atmosphere has profound implications for the dust formation mechanisms around red supergiants. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: Accepted in A&A, 10 pages, 20 figures

Journal ref: A&A 628, A101 (2019)

Performance of the Gemini Planet Imager Non-Redundant Mask and spectroscopy of two close-separation binaries HR 2690 and HD 142527

Authors: Alexandra Z. Greenbaum, Anthony Cheetham, Anand Sivaramakrishnan, Fredrik T. Rantakyrö, Gaspard Duchêne, Peter Tuthill, Robert J. De Rosa, Rebecca Oppenheimer, Bruce Macintosh, S. Mark Ammons, Vanessa P. Bailey, Travis Barman, Joanna Bulger, Andrew Cardwell, Jeffrey Chilcote, Tara Cotten, Rene Doyon, Michael P. Fitzgerald, Katherine B. Follette, Benjamin L. Gerard, Stephen J. Goodsell, James R. Graham, Pascale Hibon, Li-Wei Hung, Patrick Ingraham , et al. (29 additional authors not shown)

Abstract: The Gemini Planet Imager (GPI) contains a 10-hole non-redundant mask (NRM), enabling interferometric resolution in complement to its coronagraphic capabilities. The NRM operates both in spectroscopic (integral field spectrograph, henceforth IFS) and polarimetric configurations. NRM observations were taken between 2013 and 2016 to characterize its performance. Most observations were taken in spectr… ▽ More The Gemini Planet Imager (GPI) contains a 10-hole non-redundant mask (NRM), enabling interferometric resolution in complement to its coronagraphic capabilities. The NRM operates both in spectroscopic (integral field spectrograph, henceforth IFS) and polarimetric configurations. NRM observations were taken between 2013 and 2016 to characterize its performance. Most observations were taken in spectroscopic mode with the goal of obtaining precise astrometry and spectroscopy of faint companions to bright stars. We find a clear correlation between residual wavefront error measured by the AO system and the contrast sensitivity by comparing phase errors in observations of the same source, taken on different dates. We find a typical 5-$σ$ contrast sensitivity of $2-3~\times~10^{-3}$ at $\simλ/D$. We explore the accuracy of spectral extraction of secondary components of binary systems by recovering the signal from a simulated source injected into several datasets. We outline data reduction procedures unique to GPI's IFS and describe a newly public data pipeline used for the presented analyses. We demonstrate recovery of astrometry and spectroscopy of two known companions to HR 2690 and HD 142527. NRM+polarimetry observations achieve differential visibility precision of $σ\sim0.4\%$ in the best case. We discuss its limitations on Gemini-S/GPI for resolving inner regions of protoplanetary disks and prospects for future upgrades. We summarize lessons learned in observing with NRM in spectroscopic and polarimetric modes. △ Less

Submitted 18 April, 2019; originally announced April 2019.

Comments: Accepted to AJ, 22 pages, 14 figures

Anisotropic winds in Wolf-Rayet binary identify potential gamma-ray burst progenitor

Authors: J. R. Callingham, P. G. Tuthill, B. J. S. Pope, P. M. Williams, P. A. Crowther, M. Edwards, B. Norris, L. Kedziora-Chudczer

Abstract: The massive evolved Wolf-Rayet stars sometimes occur in colliding-wind binary systems in which dust plumes are formed as a result of the collision of stellar winds. These structures are known to encode the parameters of the binary orbit and winds. Here, we report observations of a previously undiscovered Wolf-Rayet system, 2XMM J160050.7-514245, with a spectroscopically determined wind speed of… ▽ More The massive evolved Wolf-Rayet stars sometimes occur in colliding-wind binary systems in which dust plumes are formed as a result of the collision of stellar winds. These structures are known to encode the parameters of the binary orbit and winds. Here, we report observations of a previously undiscovered Wolf-Rayet system, 2XMM J160050.7-514245, with a spectroscopically determined wind speed of $\approx$3400 km s$^{-1}$. In the thermal infrared, the system is adorned with a prominent $\approx$12$''$ spiral dust plume, revealed by proper motion studies to be expanding at only $\approx$570 km s$^{-1}$. As the dust and gas appear coeval, these observations are inconsistent with existing models of the dynamics of such colliding wind systems. We propose that this contradiction can be resolved if the system is capable of launching extremely anisotropic winds. Near-critical stellar rotation is known to drive such winds, suggesting this Wolf-Rayet system as a potential Galactic progenitor system for long-duration gamma-ray bursts. △ Less

Submitted 16 November, 2018; originally announced November 2018.

Comments: Accepted to Nature Astronomy on 2018 Oct 1. 27 pages, 9 figures, and 4 tables

SCExAO, an instrument with a dual purpose: perform cutting-edge science and develop new technologies

Authors: Julien Lozi, Olivier Guyon, Nemanja Jovanovic, Sean Goebel, Prashant Pathak, Nour Skaf, Ananya Sahoo, Barnaby Norris, Frantz Martinache, Mamadou N'Diaye, Ben Mazin, Alex B. Walter, Peter Tuthill, Tomoyuki Kudo, Hajime Kawahara, Takayuki Kotani, Michael Ireland, Nick Cvetojevic, Elsa Huby, Sylvestre Lacour, Sebastien Vievard, Tyler D. Groff, Jeffrey K. Chilcote, Jeremy Kasdin, Justin Knight , et al. (9 additional authors not shown)

Abstract: The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is an extremely modular high-contrast instrument installed on the Subaru telescope in Hawaii. SCExAO has a dual purpose. Its position in the northern hemisphere on a 8-meter telescope makes it a prime instrument for the detection and characterization of exoplanets and stellar environments over a large portion of the sky. In addit… ▽ More The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is an extremely modular high-contrast instrument installed on the Subaru telescope in Hawaii. SCExAO has a dual purpose. Its position in the northern hemisphere on a 8-meter telescope makes it a prime instrument for the detection and characterization of exoplanets and stellar environments over a large portion of the sky. In addition, SCExAO's unique design makes it the ideal instrument to test innovative technologies and algorithms quickly in a laboratory setup and subsequently deploy them on-sky. SCExAO benefits from a first stage of wavefront correction with the facility adaptive optics AO188, and splits the 600-2400 nm spectrum towards a variety of modules, in visible and near infrared, optimized for a large range of science cases. The integral field spectrograph CHARIS, with its J, H or K-band high-resolution mode or its broadband low-resolution mode, makes SCExAO a prime instrument for exoplanet detection and characterization. Here we report on the recent developments and scientific results of the SCExAO instrument. Recent upgrades were performed on a number of modules, like the visible polarimetric module VAMPIRES, the high-performance infrared coronagraphs, various wavefront control algorithms, as well as the real-time controller of AO188. The newest addition is the 20k-pixel Microwave Kinetic Inductance Detector (MKIDS) Exoplanet Camera (MEC) that will allow for previously unexplored science and technology developments. MEC, coupled with novel photon-counting speckle control, brings SCExAO closer to the final design of future high-contrast instruments optimized for Giant Segmented Mirror Telescopes (GSMTs). △ Less

Submitted 21 September, 2018; originally announced September 2018.

Comments: 12 pages, 9 figures, conference proceedings (SPIE Astronomical telescopes and instrumentation 2018)

Journal ref: Proceedings Volume 10703, Adaptive Optics Systems VI; 1070359 (2018)

Multiplexed Holographic Aperture Masking with liquid-crystal geometric phase masks

Authors: David S. Doelman, Peter Tuthill, Barnaby Norris, Michael J. Wilby, Emiel H. Por, Christoph U. Keller, Michael J. Escuti, Frans Snik

Abstract: Sparse Aperture Masking (SAM) allows for high-contrast imaging at small inner working angles, however the performance is limited by the small throughput and the number of baselines. We present the concept and first lab results of Holographic Aperture Masking (HAM) with extreme liquid-crystal geometric phase patterns. We multiplex subapertures using holographic techniques to combine the same subape… ▽ More Sparse Aperture Masking (SAM) allows for high-contrast imaging at small inner working angles, however the performance is limited by the small throughput and the number of baselines. We present the concept and first lab results of Holographic Aperture Masking (HAM) with extreme liquid-crystal geometric phase patterns. We multiplex subapertures using holographic techniques to combine the same subaperture in multiple non-redundant PSFs in combination with a non-interferometric reference spot. This way arbitrary subaperture combinations and PSF configurations can be realized, giving HAM more uv-coverage, better throughput and improved calibration as compared to SAM, at the cost of detector space. △ Less

Submitted 2 August, 2018; originally announced August 2018.

Comments: Presented at the 2018 SPIE Astronomical Telescopes + Instrumentation, Austin, Texas, USA

Journal ref: Proc. of SPIE Vol. 10701 107010T-1 (2018)

The curious case of II Lup: a complex morphology revealed with SAM/NACO and ALMA

Authors: Foteini Lykou, Albert A. Zijlstra, Jacques Kluska, Eric Lagadec, Peter G. Tuthill, Adam Avison, Barnaby R. M. Norris, Quentin A. Parker

Abstract: We present the first-ever images of the circumstellar environment of the carbon-rich AGB star II Lup in the infrared and sub-mm wavelengths, and the discovery of the envelope's non-spherical morphology with the use of high-angular resolution imaging techniques with the sparse aperture masking mode on NACO/VLT (that enables diffraction limited resolution from a single telescope) and with ALMA. We h… ▽ More We present the first-ever images of the circumstellar environment of the carbon-rich AGB star II Lup in the infrared and sub-mm wavelengths, and the discovery of the envelope's non-spherical morphology with the use of high-angular resolution imaging techniques with the sparse aperture masking mode on NACO/VLT (that enables diffraction limited resolution from a single telescope) and with ALMA. We have successfully recovered images in $Ks$ (2.18$μ$m), $L'$ (3.80$μ$m) and $M'$ (4.78$μ$m), that revealed the non-spherical morphology of the circumstellar envelope around II Lup. The stellar surface of the AGB star is unresolved (i.e. $\leq30$ mas in $Ks$) however the detected structure extends up to 110 mas from the star in all filters. Clumps have been found in the $Ks$ maps, while at lower emission levels a hook-like structure appears to extend counter-clockwise from the south. At larger spatial scales, the circumstellar envelope extends up to approximately 23 arcsec, while its shape suggests a spiral at four different molecules, namely CO, SiO, CS and HC$_3$N, with an average arm spacing of 1.7 arcsec which would imply an orbital period of 128 years for a distance of 590pc. △ Less

Submitted 1 August, 2018; originally announced August 2018.

Comments: 17 pages, 14 figures, accepted by MNRAS

The Planet Formation Imager

Authors: John D. Monnier, Stefan Kraus, Michael J. Ireland, Fabien Baron, Amelia Bayo, Jean-Philippe Berger, Michelle Creech-Eakman, Ruobing Dong, Gaspard Duchene, Catherine Espaillat, Chris Haniff, Sebastian Honig, Andrea Isella, Attila Juhasz, Lucas Labadie, Sylvestre Lacour, Stephanie Leifer, Antoine Merand, Ernest Michael, Stefano Minardi, Christoph Mordasini, David Mozurkewich, Johan Olofsson, Claudia Paladini, Romain Petrov , et al. (14 additional authors not shown)

Abstract: The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially se… ▽ More The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H2O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality. △ Less

Submitted 30 July, 2018; originally announced July 2018.

Comments: Published in Experimental Astronomy as part of topical collection "Future of Optical-infrared Interferometry in Europe"

Journal ref: Monnier, J.D., Kraus, S., Ireland, M.J. et al. Exp Astron (2018). https://doi.org/10.1007/s10686-018-9594-1

Interferometric diameters of five evolved intermediate-mass planet-hosting stars measured with PAVO at the CHARA Array

Authors: T. R. White, D. Huber, A. W. Mann, L. Casagrande, S. K. Grunblatt, A. B. Justesen, V. Silva Aguirre, T. R. Bedding, M. J. Ireland, G. H. Schaefer, P. G. Tuthill

Abstract: Debate over the planet occurrence rates around intermediate-mass stars has hinged on the accurate determination of masses of evolved stars, and has been exacerbated by a paucity of reliable, directly-measured fundamental properties for these stars. We present long-baseline optical interferometry of five evolved intermediate-mass ($\sim\,1.5\,\mathrm{M}_\odot$) planet-hosting stars using the PAVO b… ▽ More Debate over the planet occurrence rates around intermediate-mass stars has hinged on the accurate determination of masses of evolved stars, and has been exacerbated by a paucity of reliable, directly-measured fundamental properties for these stars. We present long-baseline optical interferometry of five evolved intermediate-mass ($\sim\,1.5\,\mathrm{M}_\odot$) planet-hosting stars using the PAVO beam combiner at the CHARA Array, which we combine with bolometric flux measurements and parallaxes to determine their radii and effective temperatures. We measured the radii and effective temperatures of 6 Lyncis ($5.12\pm0.16\,\mathrm{R}_\odot$, $4949\pm58\,\mathrm{K}$), 24 Sextantis ($5.49\pm0.18\,\mathrm{R}_\odot$, $4908\pm65\,\mathrm{K}$), $κ$ Coronae Borealis ($4.77\pm0.07\,\mathrm{R}_\odot$, $4870\pm47\,\mathrm{K}$), HR 6817 ($4.45\pm0.08\,\mathrm{R}_\odot$, $5013\pm59\,\mathrm{K}$), and HR 8641 ($4.91\pm0.12\,\mathrm{R}_\odot$, $4950\pm68\,\mathrm{K}$). We find disagreements of typically 15 per cent in angular diameter and $\sim$200 K in temperature compared to interferometric measurements in the literature, yet good agreement with spectroscopic and photometric temperatures, concluding that the previous interferometric measurements may have been affected by systematic errors exceeding their formal uncertainties. Modelling based on BaSTI isochrones using various sets of asteroseismic, spectroscopic, and interferometric constraints tends to favour slightly ($\sim$15 per cent) lower masses than generally reported in the literature. △ Less

Submitted 16 April, 2018; originally announced April 2018.

Comments: Accepted for publication in Monthly Notices of the Royal Astronomical Society. 11 pages, 13 figures, and 6 tables