-
Stellar Populations With Optical Spectra: Deep Learning vs. Popular Spectrum Fitting Codes
Authors:
Joanna Woo,
Dan Walters,
Finn Archinuk,
S. M. Faber,
Sara L. Ellison,
Hossen Teimoorinia,
Kartheik Iyer
Abstract:
We compare the performance of several popular spectrum fitting codes (Firefly, starlight, pyPipe3D and pPXF), and a deep-learning convolutional neural network (StarNet), in recovering known stellar population properties (mean stellar age, stellar metallicity, stellar mass-to-light ratio M*/L_r and the internal E(B-V)) of simulated galaxy spectra in optical wavelengths. Our mock spectra are constru…
▽ More
We compare the performance of several popular spectrum fitting codes (Firefly, starlight, pyPipe3D and pPXF), and a deep-learning convolutional neural network (StarNet), in recovering known stellar population properties (mean stellar age, stellar metallicity, stellar mass-to-light ratio M*/L_r and the internal E(B-V)) of simulated galaxy spectra in optical wavelengths. Our mock spectra are constructed from star-formation histories from the IllustrisTNG100-1 simulation. These spectra mimic the Sloan Digital Sky Survey (SDSS) through a novel method of including the noise, sky residuals and emission lines taken directly from SDSS. We find that StarNet vastly outperforms all conventional codes in both speed and recovery of stellar population properties (error scatter < 0.08 dex, average biases < 0.02 dex for all tested quantities), but it requires an appropriate training set. Of the non-machine-learning codes, pPXF was a factor of 3-4 times faster than the other codes, and was the best in recovering stellar population properties (error scatter of < 0.11 dex, average biases < 0.08 dex). However, the errors and biases are strongly dependent on both true and predicted values of stellar age and metallicity, and signal-to-noise ratio. The biases of all codes can approach 0.15 dex in stellar ages, metallicities and log M*/L_r , but remain < 0.05 for E(B-V). Using unrealistic Gaussian noise in the construction of mock spectra will underestimate the errors in the metallicities by a factor of two or more, and mocks without emission lines will underestimate the errors in stellar age and M*/L_r by a factor of two.
△ Less
Submitted 25 April, 2024; v1 submitted 22 January, 2024;
originally announced January 2024.
-
The ALMaQUEST Survey X: What powers merger induced star formation?
Authors:
Mallory D. Thorp,
Sara L. Ellison,
Hsi-An Pan,
Lihwai Lin,
David R. Patton,
Asa F. L. Bluck,
Dan Walters,
Jillian M. Scudder
Abstract:
Galaxy mergers are known to trigger both extended and central star formation. However, what remains to be understood is whether this triggered star formation is facilitated by enhanced star formation efficiencies, or an abundance of molecular gas fuel. This work presents spatially resolved measurements of CO emission collected with the Atacama Large Millimetre Array (ALMA) for 20 merging galaxies…
▽ More
Galaxy mergers are known to trigger both extended and central star formation. However, what remains to be understood is whether this triggered star formation is facilitated by enhanced star formation efficiencies, or an abundance of molecular gas fuel. This work presents spatially resolved measurements of CO emission collected with the Atacama Large Millimetre Array (ALMA) for 20 merging galaxies (either pairs or post-mergers) selected from the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey. Eleven additional merging galaxies are selected from the ALMA MaNGA QUEnching and STar formation (ALMaQUEST) survey, resulting in a set of 31 mergers at various stages of interaction and covering a broad range of star formation rates (SFR). We investigate galaxy-to-galaxy variations in the resolved Kennicutt-Schmidt relation (rKS: $Σ_{H_2}$ vs. $Σ_{SFR}$), the resolved molecular gas main sequence (rMGMS: $Σ_{\star}$ vs. $Σ_{H_2}$), and the resolved star-forming main sequence (rSFMS: $Σ_{\star}$ vs. $Σ_{SFR}$). We quantify offsets from these resolved relations to determine if star formation rate, molecular gas fraction, and/or star formation efficiency (SFE) is enhanced in different regions of an individual galaxy. By comparing offsets in all three parameters we can discern whether gas fraction or SFE powers an enhanced $Σ_{SFR}$. We find that merger-induced star formation can be driven by a variety of mechanisms, both within a galaxy and between different mergers, regardless of interaction stage.
△ Less
Submitted 12 August, 2022;
originally announced August 2022.
-
Quenching Timescales in the IllustrisTNG Simulation
Authors:
Dan Walters,
Joanna Woo,
Sara L. Ellison
Abstract:
The timescales for galaxy quenching offer clues to its underlying physical drivers. We investigate central galaxy quenching timescales in the IllustrisTNG 100-1 simulation, their evolution over time, and the pre-quenching properties of galaxies that predict their quenching timescales. Defining quenching duration $τ_q$ as the time between crossing sSFR thresholds, we find that $\sim$40% of galaxies…
▽ More
The timescales for galaxy quenching offer clues to its underlying physical drivers. We investigate central galaxy quenching timescales in the IllustrisTNG 100-1 simulation, their evolution over time, and the pre-quenching properties of galaxies that predict their quenching timescales. Defining quenching duration $τ_q$ as the time between crossing sSFR thresholds, we find that $\sim$40% of galaxies quench rapidly with $τ_q<$1 Gyr, but a substantial tail of galaxies can take up to 10 Gyr to quench. Furthermore, 29% of galaxies that left the star forming main sequence (SFMS) more than 2 Gyr ago never fully quench by $z=0$. While the median $τ_q$ is fairly constant with epoch, the rate of galaxies leaving the SFMS increases steadily over cosmic time, with the rate of slow quenchers being dominant around $z\sim2$ to 0.7. Compared to fast quenchers ($τ_q<$1 Gyr), slow-quenching galaxies ($τ_q>$1 Gyr) were more massive, had more massive black holes, had larger stellar radii and accreted gas with higher specific angular momentum (AM) prior to quenching. These properties evolve little by $z=0$, except for the accreting gas AM for fast quenchers, which reaches the same high AM as the gas in slow quenchers. By $z=0$, slow quenchers also have residual star formation in extended gas rings. Using the expected relationship between stellar age gradient and $τ_q$ for inside-out quenching we find agreement with MaNGA IFU observations. Our results suggest the accreting gas AM and potential well depth determine the quenching timescale.
△ Less
Submitted 31 January, 2022;
originally announced February 2022.
-
The Structural Evolution of Isolated Galaxies at Low Redshift in the IllustrisTNG Simulation
Authors:
Dan Walters,
Joanna Woo,
Sara L. Ellison,
Maan H. Hani
Abstract:
We study the structural evolution of isolated star-forming galaxies in the Illustris TNG100-1 hydrodynamical simulation, with a focus on investigating the growth of the central core density within 2 kpc ($Σ_{*,2kpc}$) in relation to total stellar mass ($M_*$) at z < 0.5. First, we show that several observational trends in the $Σ_{*,2kpc}$-$M_*$ plane are qualitatively reproduced in IllustrisTNG, i…
▽ More
We study the structural evolution of isolated star-forming galaxies in the Illustris TNG100-1 hydrodynamical simulation, with a focus on investigating the growth of the central core density within 2 kpc ($Σ_{*,2kpc}$) in relation to total stellar mass ($M_*$) at z < 0.5. First, we show that several observational trends in the $Σ_{*,2kpc}$-$M_*$ plane are qualitatively reproduced in IllustrisTNG, including the distributions of AGN, star forming galaxies, quiescent galaxies, and radial profiles of stellar age, sSFR, and metallicity. We find that galaxies with dense cores evolve parallel to the $Σ_{*,2kpc}$-$M_*$ relation, while galaxies with diffuse cores evolve along shallower trajectories. We investigate possible drivers of rapid growth in $Σ_{*,2kpc}$ compared to $M_*$. Both the current sSFR gradient and the BH accretion rate are indicators of past core growth, but are not predictors of future core growth. Major mergers (although rare in our sample; $\sim$10%) cause steeper core growth, except for high mass ($M_*$ >$\sim$ $10^{10} M_{\odot}$) mergers, which are mostly dry. Disc instabilities, as measured by the fraction of mass with Toomre Q < 2, are not predictive of rapid core growth. Instead, rapid core growth results in more stable discs. The cumulative black hole feedback history sets the maximum rate of core growth, preventing rapid growth in high-mass galaxies ($M_*$ >$\sim$ $10^{9.5} M_{\odot}$). For massive galaxies the total specific angular momentum of accreting gas is the most important predictor of future core growth. Our results suggest that the angular momentum of accreting gas controls the slope, width and zero-point evolution of the $Σ_{*,2kpc}$-$M_*$ relation.
△ Less
Submitted 22 March, 2021;
originally announced March 2021.
-
Magnetic Field Fingerprinting of Integrated Circuit Activity with a Quantum Diamond Microscope
Authors:
Matthew J. Turner,
Nicholas Langellier,
Rachel Bainbridge,
Dan Walters,
Srujan Meesala,
Thomas M. Babinec,
Pauli Kehayias,
Amir Yacoby,
Evelyn Hu,
Marko Lončar,
Ronald L. Walsworth,
Edlyn V. Levine
Abstract:
Current density distributions in active integrated circuits (ICs) result in patterns of magnetic fields that contain structural and functional information about the IC. Magnetic fields pass through standard materials used by the semiconductor industry and provide a powerful means to fingerprint IC activity for security and failure analysis applications. Here, we demonstrate high spatial resolution…
▽ More
Current density distributions in active integrated circuits (ICs) result in patterns of magnetic fields that contain structural and functional information about the IC. Magnetic fields pass through standard materials used by the semiconductor industry and provide a powerful means to fingerprint IC activity for security and failure analysis applications. Here, we demonstrate high spatial resolution, wide field-of-view, vector magnetic field imaging of static (DC) magnetic field emanations from an IC in different active states using a Quantum Diamond Microscope (QDM). The QDM employs a dense layer of fluorescent nitrogen-vacancy (NV) quantum defects near the surface of a transparent diamond substrate placed on the IC to image magnetic fields. We show that QDM imaging achieves simultaneous $\sim10$ $μ$m resolution of all three vector magnetic field components over the 3.7 mm $\times$ 3.7 mm field-of-view of the diamond. We study activity arising from spatially-dependent current flow in both intact and decapsulated field-programmable gate arrays (FPGAs); and find that QDM images can determine pre-programmed IC active states with high fidelity using machine-learning classification methods.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Precision of the ENDGame: Mixed-precision arithmetic in the iterative solver of the Unified Model
Authors:
Christopher M Maynard,
David N Walters
Abstract:
The Met Office's weather and climate simulation code the Unified Model is used for both operational Numerical Weather Prediction and Climate modelling. The computational performance of the model running on parallel supercomputers is a key consideration. A Krylov sub-space solver is employed to solve the equations of the dynamical core of the model, known as ENDGame. These describe the evolution of…
▽ More
The Met Office's weather and climate simulation code the Unified Model is used for both operational Numerical Weather Prediction and Climate modelling. The computational performance of the model running on parallel supercomputers is a key consideration. A Krylov sub-space solver is employed to solve the equations of the dynamical core of the model, known as ENDGame. These describe the evolution of the Earth's atmosphere. Typically, 64-bit precision is used throughout weather and climate applications. This work presents a mixed-precision implementation of the solver, the beneficial effect on run-time and the impact on solver convergence. The complex interplay of errors arising from accumulated round-off in floating-point arithmetic and other numerical effects is discussed. A careful analysis is required, however, the mixed-precision solver is now employed in the operational forecast to satisfy run-time constraints without compromising the accuracy of the solution.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Development and testing of cost-effective, 6 cm x 6 cm MCP-based photodetectors for fast timing applications
Authors:
Jingbo Wang,
Karen Byrum,
Marcel Demarteau,
Jeffrey Elam,
Anil Mane,
Edward May,
Robert Wagner,
Dean Walters,
Junqi Xie,
Lei Xia,
Huyue Zhao
Abstract:
Micro-channel plate (MCP)-based photodetectors are capable of picosecond level time resolution and sub-mm level position resolution, which makes them a perfect candidate for the next generation large area photodetectors. The large-area picosecond photodetector (LAPPD) collaboration is developing new techniques for making large-area photodetectors based on new MCP fabrication and functionalization…
▽ More
Micro-channel plate (MCP)-based photodetectors are capable of picosecond level time resolution and sub-mm level position resolution, which makes them a perfect candidate for the next generation large area photodetectors. The large-area picosecond photodetector (LAPPD) collaboration is developing new techniques for making large-area photodetectors based on new MCP fabrication and functionalization methods. A small single tube processing system (SmSTPS) was constructed at Argonne National Laboratory (ANL) for developing scalable, cost-effective, glass-body, 6 cm x 6 cm, picosecond photodetectors based on MCPs functionalized by Atomic Layer Deposition (ALD). Recently, a number of fully processed and hermitically sealed prototypes made of MCPs with 20 micron pores have been fabricated. This is a significant milestone for the LAPPD project. These prototypes were characterized with a pulsed laser test facility. Without optimization, the prototypes have shown excellent results: The time resolution is ~57 ps for single photoelectron mode and ~15 ps for multi-photoelectron mode; the best position resolution is < 0.8 mm for large pulses. In this paper, the tube processing system, the detector assembly, experimental setup, data analysis and the key performance will be presented.
△ Less
Submitted 26 April, 2016;
originally announced April 2016.
-
A Brief Technical History of the Large-Area Picosecond Photodetector (LAPPD) Collaboration
Authors:
Bernhard W. Adams,
Klaus Attenkofer,
Mircea Bogdan,
Karen Byrum,
Andrey Elagin,
Jeffrey W. Elam,
Henry J. Frisch,
Jean-Francois Genat,
Herve Grabas,
Joseph Gregar,
Elaine Hahn,
Mary Heintz,
Zinetula Insepov,
Valentin Ivanov,
Sharon Jelinsky,
Slade Jokely,
Sun Wu Lee,
Anil. U. Mane,
Jason McPhate,
Michael J. Minot,
Pavel Murat,
Kurtis Nishimura,
Richard Northrop,
Razib Obaid,
Eric Oberla
, et al. (16 additional authors not shown)
Abstract:
The Large Area Picosecond PhotoDetector (LAPPD) Collaboration was formed in 2009 to develop large-area photodetectors capable of time resolutions measured in pico-seconds, with accompanying sub-millimeter spatial resolution. During the next three and one-half years the Collaboration developed the LAPPD design of 20 x 20 cm modules with gains greater than $10^7$ and non-uniformity less than $15\%$,…
▽ More
The Large Area Picosecond PhotoDetector (LAPPD) Collaboration was formed in 2009 to develop large-area photodetectors capable of time resolutions measured in pico-seconds, with accompanying sub-millimeter spatial resolution. During the next three and one-half years the Collaboration developed the LAPPD design of 20 x 20 cm modules with gains greater than $10^7$ and non-uniformity less than $15\%$, time resolution less than 50 psec for single photons and spatial resolution of 700~microns in both lateral dimensions. We describe the R\&D performed to develop large-area micro-channel plate glass substrates, resistive and secondary-emitting coatings, large-area bialkali photocathodes, and RF-capable hermetic packaging. In addition, the Collaboration developed the necessary electronics for large systems capable of precise timing, built up from a custom low-power 15-GigaSample/sec waveform sampling 6-channel integrated circuit and supported by a two-level modular data acquisition system based on Field-Programmable Gate Arrays for local control, data-sparcification, and triggering. We discuss the formation, organization, and technical successes and short-comings of the Collaboration. The Collaboration ended in December 2012 with a transition from R\&D to commercialization.
△ Less
Submitted 6 March, 2016;
originally announced March 2016.
-
MCP-based Photodetectors for Cryogenic Applications
Authors:
Ranjan Dharmapalan,
Anil Mane,
Karen Byrum,
Marcel Demarteau,
Jeffrey Elam,
Edward May,
Robert Wagner,
Dean Walters,
Lei Xia,
Junqi Xie,
Huyue Zhao,
J. Wang
Abstract:
The Argonne MCP-based photo detector is an offshoot of the Large Area Pico-second Photo Detector (LAPPD) project, wherein 6 cm x 6 cm sized detectors are made at Argonne National Laboratory. We have successfully built and tested our first detectors for pico-second timing and few mm spatial resolution. We discuss our efforts to customize these detectors to operate in a cryogenic environment. Initia…
▽ More
The Argonne MCP-based photo detector is an offshoot of the Large Area Pico-second Photo Detector (LAPPD) project, wherein 6 cm x 6 cm sized detectors are made at Argonne National Laboratory. We have successfully built and tested our first detectors for pico-second timing and few mm spatial resolution. We discuss our efforts to customize these detectors to operate in a cryogenic environment. Initial plans aim to operate in liquid argon. We are also exploring ways to mitigate wave length shifting requirements and also developing bare-MCP photodetectors to operate in a gaseous cryogenic environment.
△ Less
Submitted 16 February, 2016;
originally announced February 2016.
-
Cold, dense matter via the lattice NJL model
Authors:
David N. Walters
Abstract:
We simulate the lattice Nambu--Jona-Lasinio (NJL) model in 3+1-dimensions at non-zero baryon chemical potential (mu) and zero temperature (T) and treat the results as phenomenologically relevant for cold, dense quark matter. Measurements of the chiral condensate indicate a crossover in the thermodynamic limit, whilst at high chemical potential and zero temperature we observe a non-zero diquark c…
▽ More
We simulate the lattice Nambu--Jona-Lasinio (NJL) model in 3+1-dimensions at non-zero baryon chemical potential (mu) and zero temperature (T) and treat the results as phenomenologically relevant for cold, dense quark matter. Measurements of the chiral condensate indicate a crossover in the thermodynamic limit, whilst at high chemical potential and zero temperature we observe a non-zero diquark condensate and a gap in the fermion dispersion relation, which together provide evidence for BCS superfluidity. In particular, the size of gap is found to be approximately 15% the value of the vacuum fermion mass and roughly independent of mu in the chirally restored phase.
△ Less
Submitted 26 August, 2004;
originally announced August 2004.
-
The Lattice NJL Model at Non-zero Baryon and Isospin Densities
Authors:
David N. Walters,
Simon Hands
Abstract:
We present initial results of a numerical investigation of the chiral symmetry restoring transition in the (3+1)-dimensional Nambu -- Jona-Lasinio model with both non-zero baryon chemical potential (mu_B) and isospin chemical potential (mu_I). With non-zero isospin chemical potential, the model suffers from a sign problem. We proceed in two ways: (i) We perform ``partially quenched'' simulations…
▽ More
We present initial results of a numerical investigation of the chiral symmetry restoring transition in the (3+1)-dimensional Nambu -- Jona-Lasinio model with both non-zero baryon chemical potential (mu_B) and isospin chemical potential (mu_I). With non-zero isospin chemical potential, the model suffers from a sign problem. We proceed in two ways: (i) We perform ``partially quenched'' simulations in which mu_I is made non-zero only during the measurement of chiral observables; (ii) We perform full simulations with imaginary isospin chemical potential with the aim to analytically continue results to real mu_I.
△ Less
Submitted 28 July, 2004; v1 submitted 26 July, 2004;
originally announced July 2004.
-
Numerical Portrait of a Relativistic BCS Gapped Superfluid
Authors:
Simon Hands,
David N. Walters
Abstract:
We present results of numerical simulations of the 3+1 dimensional Nambu - Jona-Lasinio (NJL) model with a non-zero baryon density enforced via the introduction of a chemical potential mu not equal to 0. The triviality of the model with a number of dimensions d>=4 is dealt with by fitting low energy constants, calculated analytically in the large number of colors (Hartree) limit, to phenomenolog…
▽ More
We present results of numerical simulations of the 3+1 dimensional Nambu - Jona-Lasinio (NJL) model with a non-zero baryon density enforced via the introduction of a chemical potential mu not equal to 0. The triviality of the model with a number of dimensions d>=4 is dealt with by fitting low energy constants, calculated analytically in the large number of colors (Hartree) limit, to phenomenological values. Non-perturbative measurements of local order parameters for superfluidity and their related susceptibilities show that, in contrast to the 2+1 dimensional model, the ground-state at high chemical potential and low temperature is that of a traditional BCS superfluid. This conclusion is supported by the direct observation of a gap in the dispersion relation for 0.5<=(mu a)<=0.85, which at (mu a)=0.8 is found to be roughly 15% the size of the vacuum fermion mass. We also present results of an initial investigation of the stability of the BCS phase against thermal fluctuations. Finally, we discuss the effect of splitting the Fermi surfaces of the pairing partners by the introduction of a non-zero isospin chemical potential.
△ Less
Submitted 1 April, 2004; v1 submitted 13 January, 2004;
originally announced January 2004.
-
A BCS Gapped Superfluid on the Lattice
Authors:
David N. Walters
Abstract:
We discuss results of numerical analyses of the 3+1 dimensional Nambu--Jona-Lasinio model at non-zero baryon density. By studying relevant order parameters, it is shown that the model goes through a transition between a vacuum with broken chiral symmetry, and a chirally restored phase at high baryon chemical potential (mu) with a diquark condensate roughly proportional to the area of the Fermi s…
▽ More
We discuss results of numerical analyses of the 3+1 dimensional Nambu--Jona-Lasinio model at non-zero baryon density. By studying relevant order parameters, it is shown that the model goes through a transition between a vacuum with broken chiral symmetry, and a chirally restored phase at high baryon chemical potential (mu) with a diquark condensate roughly proportional to the area of the Fermi surface and a broken U(1) baryon number symmetry. The condensation of diquark pairs from the fermionic spectrum is shown to lead to an energy gap (Delta) about the Fermi energy (E_F), which is found to be approximately 15% of the vacuum fermion mass and roughly independent of mu in the chirally restored phase. The ground-state is believed, therefore, to be that of a BCS superfluid. We also discuss the effect of simulating on a finite volume, and any caveats this places on the conclusions made above.
△ Less
Submitted 13 October, 2003;
originally announced October 2003.
-
A BCS Gap on the Lattice
Authors:
David N. Walters,
Simon Hands
Abstract:
Monte Carlo simulations of the 3+1 dimensional NJL model are performed with baryon chemical potential mu>0. For mu>Sigma_0, the constituent quark mass in vacuum, chiral symmetry is restored and a diquark condensate <qq_+> forms. We analyse the fermion propagator and find evidence for particle-hole mixing in the vicinity of the Fermi surface and an energy gap Delta>0, both of which provide eviden…
▽ More
Monte Carlo simulations of the 3+1 dimensional NJL model are performed with baryon chemical potential mu>0. For mu>Sigma_0, the constituent quark mass in vacuum, chiral symmetry is restored and a diquark condensate <qq_+> forms. We analyse the fermion propagator and find evidence for particle-hole mixing in the vicinity of the Fermi surface and an energy gap Delta>0, both of which provide evidence for superfluidity at high baryon density induced by a BCS mechanism.
At (mu a)=0.8 the ratio between the BCS gap and the vacuum quark mass is Delta/Sigma_0=0.15(2).
△ Less
Submitted 26 August, 2003;
originally announced August 2003.
-
Mass Generation without Phase Coherence at Nonzero Temperature
Authors:
Costas G. Strouthos,
David N. Walters
Abstract:
We present results from numerical simulations of the 2+1d SU(2)xSU(2) Nambu - Jona-Lasinio model with N_f=4 fermion flavours at zero and nonzero temperature T. At zero temperature, critical exponents are extracted from the scaling of the order parameter and fermion mass and are found to be consistent with next-to-leading order predictions of the 1/N_f expansion. At nonzero temperature we observe…
▽ More
We present results from numerical simulations of the 2+1d SU(2)xSU(2) Nambu - Jona-Lasinio model with N_f=4 fermion flavours at zero and nonzero temperature T. At zero temperature, critical exponents are extracted from the scaling of the order parameter and fermion mass and are found to be consistent with next-to-leading order predictions of the 1/N_f expansion. At nonzero temperature we observe fermion mass generation despite the lack of chiral symmetry breaking, which is forbidden by the Colemann-Mermin-Wagner theorem for all T>0. We study the effects of lattice discretisation and finite volume on the dynamically generated fermion mass. By study of the lattice dispersion relation we also show that in the hot phase there is no significant temperature induced modification to the speed of light. Studies of the equation of state are made by measuring the pressure as a function of temperature and comparison is made with large-N_f predictions.
△ Less
Submitted 11 December, 2002; v1 submitted 30 November, 2002;
originally announced December 2002.
-
A BCS Condensate in NJL_3+1 ?
Authors:
Simon Hands,
David N. Walters
Abstract:
We present results from a lattice Monte Carlo study of the Nambu - Jona-Lasinio model in 3+1 dimensions with a baryon chemical potential mu=/=0. As mu is increased there is a transition from a chirally-broken phase to relativistic quark matter, in which baryon number symmetry appears spontaneously broken by a diquark condensate at the Fermi surface, implying a superfluid ground state. Finite vol…
▽ More
We present results from a lattice Monte Carlo study of the Nambu - Jona-Lasinio model in 3+1 dimensions with a baryon chemical potential mu=/=0. As mu is increased there is a transition from a chirally-broken phase to relativistic quark matter, in which baryon number symmetry appears spontaneously broken by a diquark condensate at the Fermi surface, implying a superfluid ground state. Finite volume corrections to this relativistic BCS scenario, however, are anomalously large.
△ Less
Submitted 4 November, 2002;
originally announced November 2002.
-
Evidence for BCS Diquark Condensation in the 3+1d Lattice NJL Model
Authors:
Simon Hands,
David N. Walters
Abstract:
We present results of numerical simulations of the 3+1d Nambu - Jona-Lasinio model with a non-zero baryon chemical potential mu, with particular emphasis on the superfluid diquark condensate and associated susceptibilities. The results, when extrapolated to the zero diquark source limit, are consistent with the existence of a non-zero BCS condensate at high baryon density. The nature of the infi…
▽ More
We present results of numerical simulations of the 3+1d Nambu - Jona-Lasinio model with a non-zero baryon chemical potential mu, with particular emphasis on the superfluid diquark condensate and associated susceptibilities. The results, when extrapolated to the zero diquark source limit, are consistent with the existence of a non-zero BCS condensate at high baryon density. The nature of the infinite volume and zero temperature limits are discussed.
△ Less
Submitted 19 September, 2002;
originally announced September 2002.
-
BCS Diquark Condensation in the 3+1d Lattice NJL Model
Authors:
David N. Walters
Abstract:
We present preliminary evidence of BCS diquark condensation in the 3+1 dimensional Nambu-Jona-Lasinio (NJL) model at non-zero chemical potential (mu) on the lattice. Large N results are used to match the model's parameters to low energy, zero density phenomenology. A diquark source j is added in a partially quenched approximation to enable the measurement of lattice diquark observables. In parti…
▽ More
We present preliminary evidence of BCS diquark condensation in the 3+1 dimensional Nambu-Jona-Lasinio (NJL) model at non-zero chemical potential (mu) on the lattice. Large N results are used to match the model's parameters to low energy, zero density phenomenology. A diquark source j is added in a partially quenched approximation to enable the measurement of lattice diquark observables. In particular measurements are made of the diquark condensate and susceptibilities as functions of j which support the existence of a BCS phase at high mu.
△ Less
Submitted 6 August, 2002;
originally announced August 2002.