Showing 1–50 of 74 results for author: Yamada, R

Scaling Backwards: Minimal Synthetic Pre-training?

Authors: Ryo Nakamura, Ryu Tadokoro, Ryosuke Yamada, Yuki M. Asano, Iro Laina, Christian Rupprecht, Nakamasa Inoue, Rio Yokota, Hirokatsu Kataoka

Abstract: Pre-training and transfer learning are an important building block of current computer vision systems. While pre-training is usually performed on large real-world image datasets, in this paper we ask whether this is truly necessary. To this end, we search for a minimal, purely synthetic pre-training dataset that allows us to achieve performance similar to the 1 million images of ImageNet-1k. We co… ▽ More Pre-training and transfer learning are an important building block of current computer vision systems. While pre-training is usually performed on large real-world image datasets, in this paper we ask whether this is truly necessary. To this end, we search for a minimal, purely synthetic pre-training dataset that allows us to achieve performance similar to the 1 million images of ImageNet-1k. We construct such a dataset from a single fractal with perturbations. With this, we contribute three main findings. (i) We show that pre-training is effective even with minimal synthetic images, with performance on par with large-scale pre-training datasets like ImageNet-1k for full fine-tuning. (ii) We investigate the single parameter with which we construct artificial categories for our dataset. We find that while the shape differences can be indistinguishable to humans, they are crucial for obtaining strong performances. (iii) Finally, we investigate the minimal requirements for successful pre-training. Surprisingly, we find that a substantial reduction of synthetic images from 1k to 1 can even lead to an increase in pre-training performance, a motivation to further investigate ``scaling backwards''. Finally, we extend our method from synthetic images to real images to see if a single real image can show similar pre-training effect through shape augmentation. We find that the use of grayscale images and affine transformations allows even real images to ``scale backwards''. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Comments: Accepted to ECCV2024

Rendezvous and Merging for Two Metamorphic Robotic Systems without Global Compass

Authors: Ryonosuke Yamada, Tomoyuki Usami, Yukiko Yamauchi

Abstract: A metamorphic robotic system (MRS) consists of anonymous modules, each of which autonomously moves in the 2D square grid by sliding and rotation with keeping connectivity among the modules. Existing literature considers distributed coordination among modules so that they collectively form a single MRS. In this paper, we consider distributed coordination for two MRSs. We first present a rendezvous… ▽ More A metamorphic robotic system (MRS) consists of anonymous modules, each of which autonomously moves in the 2D square grid by sliding and rotation with keeping connectivity among the modules. Existing literature considers distributed coordination among modules so that they collectively form a single MRS. In this paper, we consider distributed coordination for two MRSs. We first present a rendezvous algorithm that makes the two MRSs gather so that each module can observe all the other modules. Then, we present a merge algorithm that makes the two MRSs assemble and establish connectivity after rendezvous is finished. These two algorithms assume that each MRS consists of five modules, that do not have a common coordinate system. Finally, we show that five modules for each MRS is necessary to solve the rendezvous problem. To the best of our knowledge, our result is the first result on distributed coordination of multiple MRSs. △ Less

Submitted 27 July, 2024; originally announced July 2024.

MSC Class: 68M14; ACM Class: C.2.4

ACA CO(J=2-1) Mapping of the Nearest Spiral Galaxy M33. II. Exploring the Evolution of Giant Molecular Clouds

Authors: Ayu Konishi, Kazuyuki Muraoka, Kazuki Tokuda, Shinji Fujita, Yasuo Fukui, Rin I. Yamada, Fumika Demachi, Kengo Tachihara, Masato I. N. Kobayashi, Nario Kuno, Kisetsu Tsuge, Hidetoshi Sano, Rie E. Miura, Akiko Kawamura, Toshikazu Onishi

Abstract: The evolution of giant molecular clouds (GMCs), the main sites of high-mass star formation, is an essential process to unravel the galaxy evolution. Using a GMC catalogue of M33 from ALMA-ACA survey, we classified 848 GMCs into three types based on the association with HII regions and their H$α$ luminosities $\textit{L}$(H$α$): Type I is associated with no HII regions; Type II with HII regions of… ▽ More The evolution of giant molecular clouds (GMCs), the main sites of high-mass star formation, is an essential process to unravel the galaxy evolution. Using a GMC catalogue of M33 from ALMA-ACA survey, we classified 848 GMCs into three types based on the association with HII regions and their H$α$ luminosities $\textit{L}$(H$α$): Type I is associated with no HII regions; Type II with HII regions of $\textit{L}$(H$α$) $<$ 10$^{37.5}$ erg s$^{-1}$; and Type III with HII regions of $\textit{L}$(H$α$) $\geqq$ 10$^{37.5}$ erg s$^{-1}$. These criteria yield 224 Type I GMCs, 473 Type II GMCs, and 151 Type III GMCs. GMCs show changes in their physical properties according to the types; mass, radius, velocity dispersion, and $^{13}$CO detection rate of GMCs systematically increase from Type I to Type III, and additionally, Type III GMCs are closest to virial equilibrium. Type III GMCs show the highest spatial correlation with clusters younger than 10 Myr, Type II GMCs moderate correlation, and Type I GMCs are almost uncorrelated. We interpret that these types indicate an evolutionary sequence from Type I to Type II, and then to Type III with timescales of 4 Myr, 13 Myr, and 5 Myr, respectively, indicating the GMC lifetime of 22 Myr by assuming that Type II GMC has the same timescale as the Large Magellanic Cloud. The evolved GMCs concentrate on the spiral arms, while the younger GMCs are apart from the arm both to the leading and trailing sides. This indicated that GMCs collide with each other by the spiral potential, leading to the compression of GMCs and the triggering of high-mass star formation, which may support the dynamic spiral model. Overall, we suggest that the GMC evolution concept helps illuminate the galaxy evolution, including the spiral arm formation. △ Less

Submitted 24 July, 2024; originally announced July 2024.

Comments: 29 pages, 23 figures, 5 Tables, accepted for publication in PASJ

Realizing Laser-driven Deuteron Acceleration with Low Energy Spread via In-situ D$_2$O-deposited Target

Authors: Tianyun Wei, Yasunobu Arikawa, Seyed Reza Mirfayzi, Yanjun Gu, Takehito Hayakawa, Alessio Morace, Kunioki Mima, Zechen Lan, Ryuya Yamada, Kohei Yamanoi, Koichi Honda, Sergei V. Bulanov, Akifumi Yogo

Abstract: Generation of quasi-monoenergetic ion pulse by laser-driven acceleration is one of the hot topics in laser plasma physics. In this study, we present a new method for the \textit{In-situ} deposition of an ultra-thin D$_2$O layer on the surface of an aluminum foil target utilizing a spherical D$_2$O capsule. Employing a 10$^{19}$ W/cm$^2$ laser, we achieve the acceleration of 10.8 MeV deuterons with… ▽ More Generation of quasi-monoenergetic ion pulse by laser-driven acceleration is one of the hot topics in laser plasma physics. In this study, we present a new method for the \textit{In-situ} deposition of an ultra-thin D$_2$O layer on the surface of an aluminum foil target utilizing a spherical D$_2$O capsule. Employing a 10$^{19}$ W/cm$^2$ laser, we achieve the acceleration of 10.8 MeV deuterons with an energy spread of $Δ$E/E = 4.6% in the most favorable shot. The energy spread depends on the exposure time of the D$_2$O capsule in the vacuum chamber. This method has the potential to extend its applicability to other ion species. △ Less

Submitted 1 June, 2024; v1 submitted 11 April, 2024; originally announced April 2024.

Nernst effect of high-mobility Weyl electrons in NdAlSi enhanced by a Fermi surface nesting instability

Authors: Rinsuke Yamada, Takuya Nomoto, Atsushi Miyake, Toshihiro Terakawa, Akiko Kikkawa, Ryotaro Arita, Masashi Tokunaga, Yasujiro Taguchi, Yoshinori Tokura, Max Hirschberger

Abstract: The thermoelectric Nernst effect of solids converts heat flow to beneficial electronic voltages. Here, using a correlated topological semimetal with high carrier mobility $μ$ in presence of magnetic fluctuations, we demonstrate an enhancement of the Nernst effect close to a magnetic phase transition. A magnetic instability in NdAlSi modifies the carrier relaxation time on 'hotspots' in momentum sp… ▽ More The thermoelectric Nernst effect of solids converts heat flow to beneficial electronic voltages. Here, using a correlated topological semimetal with high carrier mobility $μ$ in presence of magnetic fluctuations, we demonstrate an enhancement of the Nernst effect close to a magnetic phase transition. A magnetic instability in NdAlSi modifies the carrier relaxation time on 'hotspots' in momentum space, causing a strong band filling dependence of $μ$. We quantitatively derive electronic band parameters from a novel two-band analysis of the Nernst effect $S_{xy}$, in good agreement with quantum oscillation measurements and band calculations. While the Nernst response of NdAlSi behaves much like conventional semimetals at high temperatures, an additional contribution $ΔS_{xy}$ from electronic correlations appears just above the magnetic transition. Our work demonstrates the engineering of the relaxation time, or the momentum-dependent self energy, to generate a large Nernst response independent of a material's carrier density, i.e. for metals, semimetals, and semiconductors with large $μ$. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Journal ref: Physical Review x 14, 021012 (2024)

Sonification of Wigner functions: case study of intense light-matter interactions

Authors: Reiko Yamada, Antoine Reserbat-Plantey, Eloy Piñol, Maciej Lewenstein

Abstract: In quantum mechanics, the Wigner function $ρ_W(\textbf{r},\textbf{p})$ serves as a phase-space representation, capturing information about both the position $\textbf{r}$ and momentum $\textbf{p}$ of a quantum system. The Wigner function facilitates the calculation of expectation values of observables, examination of quantum system dynamics, and analysis of coherence and correlations. Therefore, it… ▽ More In quantum mechanics, the Wigner function $ρ_W(\textbf{r},\textbf{p})$ serves as a phase-space representation, capturing information about both the position $\textbf{r}$ and momentum $\textbf{p}$ of a quantum system. The Wigner function facilitates the calculation of expectation values of observables, examination of quantum system dynamics, and analysis of coherence and correlations. Therefore, it might serve as a tool to express quantum systems intuitively, for example, by using sonification techniques. This paper summarizes the experimental strategies employed in a previous project and delineates a new approach based on its outcomes. Emphasizing the attribution of specific Wigner functions to their underlying quantum states, dynamics, and sources; our proposed methodology seeks to refine the sonification and scoring process, aiming to enhance intuitive understanding and interpretation of quantum phenomena. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: 9 pages, 2 figures

Gapped nodal planes drive a large topological Nernst effect in a chiral lattice antiferromagnet

Authors: N. D. Khanh, S. Minami, M. Hirschmann, T. Nomoto, M. C. Jiang, R. Yamada, N. Heinsdorf, D. Yamaguchi, Y. Hayashi, Y. Okamura, H. Watanabe, G. Y. Guo, Y. Takahashi, S. Seki, Y. Taguchi, Y. Tokura, R. Arita, M. Hirschberger

Abstract: The electronic structure of compensated antiferromagnets (CAF) has drawn attention for its ability to create large responses, reminiscent of ferromagnets and suitable for data storage and readout, despite (nearly) net-zero spontaneous magnetization. Many of the striking experimental signatures predicted for CAF, such as giant thermoelectric Nernst effects, are enhanced when two or more electronic… ▽ More The electronic structure of compensated antiferromagnets (CAF) has drawn attention for its ability to create large responses, reminiscent of ferromagnets and suitable for data storage and readout, despite (nearly) net-zero spontaneous magnetization. Many of the striking experimental signatures predicted for CAF, such as giant thermoelectric Nernst effects, are enhanced when two or more electronic bands are nearly degenerate in vicinity of the Fermi energy. Here, we use thermoelectric and electric transport experiments to study the electronic structure of the layered, chiral metal CoNb3S6 in its all-in-all-out CAF ground state and report near-degeneracies of electron bands at the upper and lower boundaries of the first Brillouin zone. Considering non-symmorphic spin-space group symmetries in the non-relativistic approximation for the ordered phase, these near-degeneracies are approximately protected by a lattice translation combined with spin rotation, and are vestiges of nodal planes enforced by a screw axis symmetry in the paramagnetic state. Hot spots of emergent, or fictitious, magnetic fields are formed at the slightly gapped nodal plane, generating the spontaneous Hall and Nernst effects in this CAF. Taking into account more than six hundred Wannier orbitals, our model quantitatively reproduces the observed spontaneous Nernst effect, emphasizes the role of proximate symmetries in the emergent responses of CAF, and demonstrates the promise of ab-initio search for functional responses in a wide class of materials with reconstructed unit cells due to spin or charge order. △ Less

Submitted 12 May, 2024; v1 submitted 2 March, 2024; originally announced March 2024.

Primitive Geometry Segment Pre-training for 3D Medical Image Segmentation

Authors: Ryu Tadokoro, Ryosuke Yamada, Kodai Nakashima, Ryo Nakamura, Hirokatsu Kataoka

Abstract: The construction of 3D medical image datasets presents several issues, including requiring significant financial costs in data collection and specialized expertise for annotation, as well as strict privacy concerns for patient confidentiality compared to natural image datasets. Therefore, it has become a pressing issue in 3D medical image segmentation to enable data-efficient learning with limited… ▽ More The construction of 3D medical image datasets presents several issues, including requiring significant financial costs in data collection and specialized expertise for annotation, as well as strict privacy concerns for patient confidentiality compared to natural image datasets. Therefore, it has become a pressing issue in 3D medical image segmentation to enable data-efficient learning with limited 3D medical data and supervision. A promising approach is pre-training, but improving its performance in 3D medical image segmentation is difficult due to the small size of existing 3D medical image datasets. We thus present the Primitive Geometry Segment Pre-training (PrimGeoSeg) method to enable the learning of 3D semantic features by pre-training segmentation tasks using only primitive geometric objects for 3D medical image segmentation. PrimGeoSeg performs more accurate and efficient 3D medical image segmentation without manual data collection and annotation. Further, experimental results show that PrimGeoSeg on SwinUNETR improves performance over learning from scratch on BTCV, MSD (Task06), and BraTS datasets by 3.7%, 4.4%, and 0.3%, respectively. Remarkably, the performance was equal to or better than state-of-the-art self-supervised learning despite the equal number of pre-training data. From experimental results, we conclude that effective pre-training can be achieved by looking at primitive geometric objects only. Code and dataset are available at https://github.com/SUPER-TADORY/PrimGeoSeg. △ Less

Submitted 7 January, 2024; originally announced January 2024.

Comments: Accepted to BMVC2023 (Oral)

Report number: 152

Journal ref: Proceedings of the British Machine Vision Conference (BMVC), 2023

Towards the Intuitive Understanding of Quantum World: Sonification of Rabi Oscillations, Wigner functions, and Quantum Simulators

Authors: Reiko Yamada, Eloy Piñol, Samuele Grandi, Jakub Zakrzewski, Maciej Lewenstein

Abstract: Recently, there has been considerable interest in "sonifying" scientific data; however, sonifying quantum processes using the newest quantum technologies, including Noise Intermediate Scale Quantum devices and quantum random number generators, is still an emerging area of research. Music technologists and composers employ the growing accessibility to diverse data from quantum mechanics as musical… ▽ More Recently, there has been considerable interest in "sonifying" scientific data; however, sonifying quantum processes using the newest quantum technologies, including Noise Intermediate Scale Quantum devices and quantum random number generators, is still an emerging area of research. Music technologists and composers employ the growing accessibility to diverse data from quantum mechanics as musical tools in the hope of generating new sound expressions. How different is the quantum world from the classical one, and is it possible to express the quantum world using sounds? Quantum phenomena are very different from those that we experience in our everyday lives. Thus, it is challenging to understand them intuitively. In this paper, we propose sonification as a method toward an intuitive understanding of various quantum mechanical phenomena, from Rabi oscillations and resonance fluorescence of a single atom through the generation of Schrödinger cat states in strong laser field physics to insulator-superfluid transition in quantum many-body systems. This paper illustrates various methods we experimented with in sonification and score representations of quantum data depending on the source data and performance settings. △ Less

Submitted 26 March, 2024; v1 submitted 22 November, 2023; originally announced November 2023.

Comments: 8 pages, 12 figures, presented at the 2nd International Symposium on Quantum Computing and Musical Creativity 2023; typos corrected

ACA CO($J=2-1$) Mapping of the Nearest Spiral Galaxy M33. I. Initial Results and Identification of Molecular Clouds

Authors: Kazuyuki Muraoka, Ayu Konishi, Kazuki Tokuda, Hiroshi Kondo, Rie E. Miura, Tomoka Tosaki, Sachiko Onodera, Nario Kuno, Masato I. N. Kobayashi, Kisetsu Tsuge, Hidetoshi Sano, Naoya Kitano, Shinji Fujita, Atsushi Nishimura, Toshikazu Onishi, Kazuya Saigo, Rin I. Yamada, Fumika Demachi, Kengo Tachihara, Yasuo Fukui, Akiko Kawamura

Abstract: We present the results of ALMA-ACA 7 m-array observations in $^{12}$CO($J=2-1$), $^{13}$CO($J=2-1$), and C$^{18}$O($J=2-1$) line emission toward the molecular-gas disk in the Local Group spiral galaxy M33 at an angular resolution of 7".31 $\times$ 6".50 (30 pc $\times$ 26 pc). We combined the ACA 7 m-array $^{12}$CO($J=2-1$) data with the IRAM 30 m data to compensate for emission from diffuse mole… ▽ More We present the results of ALMA-ACA 7 m-array observations in $^{12}$CO($J=2-1$), $^{13}$CO($J=2-1$), and C$^{18}$O($J=2-1$) line emission toward the molecular-gas disk in the Local Group spiral galaxy M33 at an angular resolution of 7".31 $\times$ 6".50 (30 pc $\times$ 26 pc). We combined the ACA 7 m-array $^{12}$CO($J=2-1$) data with the IRAM 30 m data to compensate for emission from diffuse molecular-gas components. The ACA+IRAM combined $^{12}$CO($J=2-1$) map clearly depicts the cloud-scale molecular-gas structure over the M33 disk. Based on the ACA+IRAM $^{12}$CO($J=2-1$) cube data, we cataloged 848 molecular clouds with a mass range from $10^3$ $M_{\odot}$ to $10^6$ $M_{\odot}$. We found that high-mass clouds ($\geq 10^5 M_{\odot}$) tend to associate with the $8 μ$m-bright sources in the spiral arm region, while low-mass clouds ($< 10^5 M_{\odot}$) tend to be apart from such $8 μ$m-bright sources and to exist in the inter-arm region. We compared the cataloged clouds with GMCs observed by the IRAM 30 m telescope at 49 pc resolution (IRAM GMC: Corbelli et al. 2017), and found that a small IRAM GMC is likely to be identified as a single molecular cloud even in ACA+IRAM CO data, while a large IRAM GMC can be resolved into multiple ACA+IRAM clouds. The velocity dispersion of a large IRAM GMC is mainly dominated by the line-of-sight velocity difference between small clouds inside the GMC rather than the internal cloud velocity broadening. △ Less

Submitted 5 July, 2023; v1 submitted 5 July, 2023; originally announced July 2023.

Comments: 23 pages, 17 figures, accepted for publication in the Astrophysical Journal

Non-coplanar helimagnetism in the layered van-der-Waals metal DyTe$_3$

Authors: Shun Akatsuka, Sebastian Esser, Shun Okumura, Ryota Yambe, Rinsuke Yamada, Moritz M. Hirschmann, Seno Aji, Jonathan S. White, Shang Gao, Yoshichika Onuki, Taka-hisa Arima, Taro Nakajima, Max Hirschberger

Abstract: Magnetic materials with highly anisotropic chemical bonding can be exfoliated to realize ultrathin sheets or interfaces with highly controllable optical or spintronics responses, while also promising novel cross-correlation phenomena between electric polarization and the magnetic texture. The vast majority of these van-der-Waals magnets are collinear ferro-, ferri-, or antiferromagnets, with a par… ▽ More Magnetic materials with highly anisotropic chemical bonding can be exfoliated to realize ultrathin sheets or interfaces with highly controllable optical or spintronics responses, while also promising novel cross-correlation phenomena between electric polarization and the magnetic texture. The vast majority of these van-der-Waals magnets are collinear ferro-, ferri-, or antiferromagnets, with a particular scarcity of lattice-incommensurate helimagnets of defined left- or right-handed rotation sense, or helicity. Here we use polarized neutron scattering to reveal cycloidal, or conical, magnetic structures in DyTe$_3$, with coupled commensurate and incommensurate order parameters, where covalently bonded double-slabs of dysprosium square nets are separated by highly metallic tellurium layers. Based on this ground state and its evolution in a magnetic field as probed by small-angle neutron scattering (SANS), we establish a one-dimensional spin model with off-diagonal on-site terms, spatially modulated by the unconventional charge order in DyTe$_3$. The CDW-driven term couples to antiferromagnetism, or to the net magnetization in applied magnetic field, and creates a complex magnetic phase diagram indicative of competing interactions in an easily cleavable helimagnet. Our work paves the way for twistronics research, where helimagnetic layers can be combined to form complex spin textures on-demand, using the vast family of rare earth chalcogenides and beyond. △ Less

Submitted 28 January, 2024; v1 submitted 7 June, 2023; originally announced June 2023.

Comments: 61 pages, 5 figures, 16 extended figures

Journal ref: Nat. Commun. 15, 4291 (2024)

Giant molecular clouds and their Type classification in M74: Toward understanding star formation and cloud evolution

Authors: F. Demachi, Y. Fukui, R. I. Yamada, K. Tachihara, T. Hayakawa, K. Tokuda, S. Fujita, M. I. N. Kobayashi, K. Muraoka, A. Konishi, K. Tsuge, T. Onishi, A. Kawamura

Abstract: We investigated the giant molecular clouds (GMCs) in M74 (NGC 628), using data obtained from the PHANGS project. We applied the GMC Types according to the activity of star formation: Type I without star formation, Type II with H$α$ luminosity ($L_\mathrm{Hα}$) less than $10^{37.5}~\mathrm{erg~s^{-1}}$, and Type III with $L_\mathrm{Hα}$ greater than $10^{37.5}~\mathrm{erg~s^{-1}}$. A total of 432 G… ▽ More We investigated the giant molecular clouds (GMCs) in M74 (NGC 628), using data obtained from the PHANGS project. We applied the GMC Types according to the activity of star formation: Type I without star formation, Type II with H$α$ luminosity ($L_\mathrm{Hα}$) less than $10^{37.5}~\mathrm{erg~s^{-1}}$, and Type III with $L_\mathrm{Hα}$ greater than $10^{37.5}~\mathrm{erg~s^{-1}}$. A total of 432 GMCs were identified, with 59, 201, and 172 GMCs, for Type I, II, and III, respectively. The size and mass of the GMCs range from 23 to 238 pc and $10^{4.9}$ to $10^{7.1}$ M$_{\odot}$, indicating that the mass and radius increase from Type I to III. Clusters younger than 4 Myr and HII regions are concentrated within 150 pc of a GMC, indicating a tight association between these young objects and GMCs. The virial ratio decreases from Type I to Type III, indicating that Type III GMCs are the most gravitationally relaxed among the three. We interpret that the GMCs evolve from Type I to Type III, as previously observed in the LMC. Based on a steady-state assumption, the estimated evolutionary timescales of Type I, II, and III are 1, 5, and 4 Myr, respectively. We assume that the timescale of Type III is equal to the age of the associated clusters, indicating a GMC lifetime of 10 Myr or longer. Although Chevance et al. (2020, MNRAS, 493, 2872) investigated GMCs using the same PHANGS dataset of M74, they did not define a GMC, reaching an evolutionary picture with a 20 Myr duration of the non-star-forming phase, which was five times longer than 4 Myr. We compare the present results with those of Chevance et al. (2020) and argue that defining individual GMCs is essential for understanding GMC evolution. △ Less

Submitted 25 July, 2024; v1 submitted 30 May, 2023; originally announced May 2023.

Comments: 30 pages, 34 figures, 7 tables

Ammonia mapping observations of the Galactic infrared bubble N49: Three NH$_3$ clumps along the molecular filament

Authors: Mikito Kohno, James O. Chibueze, Ross A. Burns, Toshihiro Omodaka, Toshihiro Handa, Takeru Murase, Rin I. Yamada, Takumi Nagayama, Makoto Nakano, Kazuyoshi Sunada, Kengo Tachihara, Yasuo Fukui

Abstract: We have carried out the NH$_3$ $(J,K)=(1,1),(2,2),$ and $(3,3)$ mapping observations toward the Galactic infrared bubble N49 (G28.83-0.25) using the Nobeyama 45 m telescope. Three NH$_3$ clumps (A, B, and C) were discovered along the molecular filament with the radial velocities of $\sim$ 96, 87, and 89 km s$^{-1}$, respectively. The kinetic temperature derived from the NH$_3$ (2,2)/NH$_3$ (1,1) s… ▽ More We have carried out the NH$_3$ $(J,K)=(1,1),(2,2),$ and $(3,3)$ mapping observations toward the Galactic infrared bubble N49 (G28.83-0.25) using the Nobeyama 45 m telescope. Three NH$_3$ clumps (A, B, and C) were discovered along the molecular filament with the radial velocities of $\sim$ 96, 87, and 89 km s$^{-1}$, respectively. The kinetic temperature derived from the NH$_3$ (2,2)/NH$_3$ (1,1) shows $T_{\rm kin} = 27.0 \pm 0.6$ K enhanced at Clump B in the eastern edge of the bubble, where position coincides with massive young stellar objects (MYSOs) associated with the 6.7 GHz class II methanol maser source. This result shows the dense clump is locally heated by stellar feedback from the embedded MYSOs. The NH$_3$ Clump B also exists at the 88 km s$^{-1}$ and 95 km s$^{-1}$ molecular filament intersection. We therefore suggest that the NH$_3$ dense gas formation in Clump B can be explained by a filament-filament interaction scenario. On the other hand, NH$_3$ Clump A and C at the northern and southern side of the molecular filament might be the sites of spontaneous star formation because these clumps are located $\sim$5$-$10 pc away from the edge of the bubble. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: 29 pages, 13 figures, 3 tables, accepted for Publications of the Astronomical Society of Japan (PASJ)

First-step experiment in developing optical-spring quantum locking for DECIGO: sensitivity optimization for simulated quantum noise by completing the square

Authors: Tomohiro Ishikawa, Yuki Kawasaki, Kenji Tsuji, Rika Yamada, Izumi Watanabe, Bin Wu, Shoki Iwaguchi, Ryuma Shimizu, Kurumi Umemura, Koji Nagano, Yutaro Enomoto, Kentaro Komori, Yuta Michimura, Akira Furusawa, Seiji Kawamura

Abstract: DECi-hertz Interferometer Gravitational Wave Observatory (DECIGO) is a future mission for a space-borne laser interferometer. DECIGO has 1,000-km-long arm cavities mainly to detect the primordial gravitational waves (PGW) at lower frequencies around 0.1 Hz. Observations in the electromagnetic spectrum have lowered the bounds on the upper limit of PGW energy density (… ▽ More DECi-hertz Interferometer Gravitational Wave Observatory (DECIGO) is a future mission for a space-borne laser interferometer. DECIGO has 1,000-km-long arm cavities mainly to detect the primordial gravitational waves (PGW) at lower frequencies around 0.1 Hz. Observations in the electromagnetic spectrum have lowered the bounds on the upper limit of PGW energy density ($Ω_{\rm gw} \sim 10^{-15} \to 10^{-16}$). As a result, DECIGO's target sensitivity, which is mainly limited by quantum noise, needs further improvement. To maximize the feasibility of detection while constrained by DECIGO's large diffraction loss, a quantum locking technique with an optical spring was theoretically proposed to improve the signal-to-noise ratio of the PGW. In this paper, we experimentally verify one key element of the optical-spring quantum locking: sensitivity optimization by completing the square of multiple detector outputs. This experiment is operated on a simplified tabletop optical setup with classical noise simulating quantum noise. We succeed in getting the best of the sensitivities with two different laser powers by the square completion method. △ Less

Submitted 22 November, 2022; originally announced November 2022.

Comments: 10 pages, 14 figures

PoF: Post-Training of Feature Extractor for Improving Generalization

Authors: Ikuro Sato, Ryota Yamada, Masayuki Tanaka, Nakamasa Inoue, Rei Kawakami

Abstract: It has been intensively investigated that the local shape, especially flatness, of the loss landscape near a minimum plays an important role for generalization of deep models. We developed a training algorithm called PoF: Post-Training of Feature Extractor that updates the feature extractor part of an already-trained deep model to search a flatter minimum. The characteristics are two-fold: 1) Feat… ▽ More It has been intensively investigated that the local shape, especially flatness, of the loss landscape near a minimum plays an important role for generalization of deep models. We developed a training algorithm called PoF: Post-Training of Feature Extractor that updates the feature extractor part of an already-trained deep model to search a flatter minimum. The characteristics are two-fold: 1) Feature extractor is trained under parameter perturbations in the higher-layer parameter space, based on observations that suggest flattening higher-layer parameter space, and 2) the perturbation range is determined in a data-driven manner aiming to reduce a part of test loss caused by the positive loss curvature. We provide a theoretical analysis that shows the proposed algorithm implicitly reduces the target Hessian components as well as the loss. Experimental results show that PoF improved model performance against baseline methods on both CIFAR-10 and CIFAR-100 datasets for only 10-epoch post-training, and on SVHN dataset for 50-epoch post-training. Source code is available at: \url{https://github.com/DensoITLab/PoF-v1 △ Less

Submitted 5 July, 2022; originally announced July 2022.

Comments: Accepted to ICML2022. Contains a link to the code

Replacing Labeled Real-image Datasets with Auto-generated Contours

Authors: Hirokatsu Kataoka, Ryo Hayamizu, Ryosuke Yamada, Kodai Nakashima, Sora Takashima, Xinyu Zhang, Edgar Josafat Martinez-Noriega, Nakamasa Inoue, Rio Yokota

Abstract: In the present work, we show that the performance of formula-driven supervised learning (FDSL) can match or even exceed that of ImageNet-21k without the use of real images, human-, and self-supervision during the pre-training of Vision Transformers (ViTs). For example, ViT-Base pre-trained on ImageNet-21k shows 81.8% top-1 accuracy when fine-tuned on ImageNet-1k and FDSL shows 82.7% top-1 accuracy… ▽ More In the present work, we show that the performance of formula-driven supervised learning (FDSL) can match or even exceed that of ImageNet-21k without the use of real images, human-, and self-supervision during the pre-training of Vision Transformers (ViTs). For example, ViT-Base pre-trained on ImageNet-21k shows 81.8% top-1 accuracy when fine-tuned on ImageNet-1k and FDSL shows 82.7% top-1 accuracy when pre-trained under the same conditions (number of images, hyperparameters, and number of epochs). Images generated by formulas avoid the privacy/copyright issues, labeling cost and errors, and biases that real images suffer from, and thus have tremendous potential for pre-training general models. To understand the performance of the synthetic images, we tested two hypotheses, namely (i) object contours are what matter in FDSL datasets and (ii) increased number of parameters to create labels affects performance improvement in FDSL pre-training. To test the former hypothesis, we constructed a dataset that consisted of simple object contour combinations. We found that this dataset can match the performance of fractals. For the latter hypothesis, we found that increasing the difficulty of the pre-training task generally leads to better fine-tuning accuracy. △ Less

Submitted 18 June, 2022; originally announced June 2022.

Comments: Accepted to CVPR 2022

Rotational effect as the possible cause of the east-west asymmetric crater rims on Ryugu observed by LIDAR data

Authors: Naoyuki Hirata, Noriyuki Namiki, Fumi Yoshida, Koji Matsumoto, Hirotomo Noda, Hiroki Senshu, Takahide Mizuno, Fuyuto Terui, Yoshiaki Ishihara, Ryuhei Yamada, Keiko Yamamoto, Shinsuke Abe, Rina Noguchi, Naru Hirata, Yuichi Tsuda, Sei-ichiro Watanabe

Abstract: Asteroid 162173 Ryugu is a rubble-pile asteroid, whose top-shape is compatible with models of deformation by spin up. Rims of major craters on Ryugu have an east-west asymmetric profile; their western crater rims are sharp and tall, while their eastern crater rims are rounded and low. Although there are various possible explanations, we theoretically assess the effect of asteroid rotation as the p… ▽ More Asteroid 162173 Ryugu is a rubble-pile asteroid, whose top-shape is compatible with models of deformation by spin up. Rims of major craters on Ryugu have an east-west asymmetric profile; their western crater rims are sharp and tall, while their eastern crater rims are rounded and low. Although there are various possible explanations, we theoretically assess the effect of asteroid rotation as the possible reason for this east-west asymmetry. It is known that the trajectories and fates of ejecta are affected by the rotation. The Coriolis force and the inertial speed of the rotating surface are the factors altering the ejecta trajectories. Consequently, we found that the east-west asymmetric crater rims might be formed as a result of rotation, when the inertial speed of the rotating surface is nearly equal to the first cosmic velocity of the body. In other words, it is possible that the observed east-west asymmetric rims of the Urashima, Cendrillon, and Kolobok craters were formed when Ryugu's rotation period was ~3.6 h. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Comments: 30 pages 13 figures

Journal ref: Icarus Volume 354, 15 January 2021, 114073

Ammonia mapping observations toward the Galactic massive star-forming region Sh 2-255 and Sh 2-257

Authors: Mikito Kohno, Toshihiro Omodaka, Toshihiro Handa, James O. Chibueze, Takumi Nagayama, Ross A. Burns, Takeru Murase, Ren Matsusaka, Makoto Nakano, Kazuyoshi Sunada, Rin I. Yamada, John H. Bieging

Abstract: We performed NH$_3\ (J,K)=(1,1),(2,2),$ and $(3,3)$ mapping observations toward the Galactic massive star-forming region Sh 2-255 and Sh 2-257 using the Nobeyama 45-m telescope as a part of the KAGONMA (KAgoshima Galactic Object survey with the Nobeyama 45-metre telescope by Mapping in Ammonia lines) project. NH$_3$ (1,1) has an intensity peak at the cluster S255 N, is distributed over 3 pc… ▽ More We performed NH$_3\ (J,K)=(1,1),(2,2),$ and $(3,3)$ mapping observations toward the Galactic massive star-forming region Sh 2-255 and Sh 2-257 using the Nobeyama 45-m telescope as a part of the KAGONMA (KAgoshima Galactic Object survey with the Nobeyama 45-metre telescope by Mapping in Ammonia lines) project. NH$_3$ (1,1) has an intensity peak at the cluster S255 N, is distributed over 3 pc $\times$ 2 pc and is located between two HII regions. The kinetic temperature derived from the NH$_3 (2,2)/(1,1)$ ratio was $\sim 35$ K near the massive cluster S255 IR. These clusters also show emission with a large line width of $\sim$ 3-4 km s$^{-1}$. Based on the reported data we suggest that NH$_3$ gas in these regions is affected by stellar feedback from embedded YSO clusters in S255 IR and S255 N. We also detected NH$_3$ (1,1) emission in a region west of the main gas clump at the location of a concentration of Class II YSOs adjacent to the HII regions Sh 2-254. The presence of Class II YSOs implies $\sim$ 2 Myr of star formation, younger than Sh 2-254 ($\sim 5$ Myr), thus we suggest that star formation in the western region could be influenced by the older HII region Sh 2-254. △ Less

Submitted 3 February, 2022; originally announced February 2022.

Comments: 20 pages, 8 figures, 3 tables, accepted for Publications of the Astronomical Society of Japan (PASJ)

Search by a Metamorphic Robotic System in a Finite 3D Cubic Grid

Authors: Ryonosuke Yamada, Yukiko Yamauchi

Abstract: We consider search in a finite 3D cubic grid by a metamorphic robotic system (MRS), that consists of anonymous modules. A module can perform a sliding and rotation while the whole modules keep connectivity. As the number of modules increases, the variety of actions that the MRS can perform increases. The search problem requires the MRS to find a target in a given finite field. Doi et al. (SSS 2018… ▽ More We consider search in a finite 3D cubic grid by a metamorphic robotic system (MRS), that consists of anonymous modules. A module can perform a sliding and rotation while the whole modules keep connectivity. As the number of modules increases, the variety of actions that the MRS can perform increases. The search problem requires the MRS to find a target in a given finite field. Doi et al. (SSS 2018) demonstrate a necessary and sufficient number of modules for search in a finite 2D square grid. We consider search in a finite 3D cubic grid and investigate the effect of common knowledge. We consider three different settings. First, we show that three modules are necessary and sufficient when all modules are equipped with a common compass, i.e., they agree on the direction and orientation of the $x$, $y$, and $z$ axes. Second, we show that four modules are necessary and sufficient when all modules agree on the direction and orientation of the vertical axis. Finally, we show that five modules are necessary and sufficient when all modules are not equipped with a common compass. Our results show that the shapes of the MRS in the 3D cubic grid have richer structure than those in the 2D square grid. △ Less

Submitted 30 November, 2021; originally announced November 2021.

A Large Diameter Millimeter-Wave Low-Pass Filter Made of Alumina with Laser Ablated Anti-Reflection Coating

Authors: Ryota Takaku, Qi Wen, Scott Cray, Mark Devlin, Simon Dicker, Shaul Hanany, Takashi Hasebe, Teruhito Iida, Nobuhiko Katayama, Kuniaki Konishi, Makoto Kuwata-Gonokami, Tomotake Matsumura, Norikatsu Mio, Haruyuki Sakurai, Yuki Sakurai, Ryohei Yamada, Junji Yumoto

Abstract: We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflec… ▽ More We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflective loss due to the ARC is 1%. The difference in transmission between the s- and p-polarization states is less than 1%. To within 1% accuracy we observe no variance in these results when transmission is measured in six independent filter spatial locations. The alumina filter replaced a prior MUSTANG2 Teflon filter. Data taken with the filter heat sunk to its nominal 40 K stage show performance consistent with expectations: a reduction of about 50% in filters-induced optical power load on the 300 mK stage, and in in-band optical loading on the detectors. It has taken less than 4 days to laser-ablate the SWS on both sides of the alumina disk. This is the first report of an alumina filter with SWS ARC deployed with an operating instrument, and the first demonstration of a large area fabrication of SWS with laser ablation. △ Less

Submitted 21 January, 2022; v1 submitted 30 September, 2021; originally announced September 2021.

Comments: This version reflects the published version; 21 pages, 11 figures

Journal ref: Optics Express (2021), Volume 29, #25/6, Pg 41745

Applications of Quantum Randomness: From Rabi Oscillations to Fourier Axis Controlling the Musical Timbre

Authors: Reiko Yamada, Samuele Grandi, Gorka Muñoz-Gil, Luca Barbiero, Albert Aloy, Maciej Lewenstein

Abstract: Randomness has attracted great interest in the field of music composition for quite some time. As early as 1962, Iannis Xenakis started exploring a stochastic approach to randomness by using computer-based interlinking probability functions to determine compositional structure, pitches and their durations. Soon after, composers and music technologists started to explore randomness with various met… ▽ More Randomness has attracted great interest in the field of music composition for quite some time. As early as 1962, Iannis Xenakis started exploring a stochastic approach to randomness by using computer-based interlinking probability functions to determine compositional structure, pitches and their durations. Soon after, composers and music technologists started to explore randomness with various methods of algorithmic compositions, sometimes with the help of artificial intelligence. However, in most cases, the source of randomness they used was in fact deterministic in nature. That is to say, the random numbers that they employed are imperfect in the strict sense (simply put, perfect random numbers never have repeating patterns). Moreover, the method in which they produced such randomness was extrinsic to the method in which randomness was applied. In this project, we attempt to take a further step by directly producing sound events from the genuine quantum true randomness of quantum physical systems. Through this method, we aim at achieving a new sense of aesthetic effect in music which derives from the true randomness that prevails in the natural quantum world. △ Less

Submitted 8 September, 2021; originally announced September 2021.

Journal ref: International Journal of Music Science, Technology and Art 3 (2), 17-25 (2021)

Low-power threshold gas discharge by enhanced local electric field in electromagnetically-induced-transparencylike metamolecules

Authors: Yasuhiro Tamayama, Ryosuke Yamada

Abstract: To realize efficient nonlinear metamaterials, we investigate a method for enhancing the local electric field in a metamolecule composed of two radiatively coupled cut-wire resonators where resonance of the cut-wire resonators and low-group-velocity propagation of an incident electromagnetic wave simultaneously occur. Numerical analysis shows that the local electric field in the metamolecule can be… ▽ More To realize efficient nonlinear metamaterials, we investigate a method for enhancing the local electric field in a metamolecule composed of two radiatively coupled cut-wire resonators where resonance of the cut-wire resonators and low-group-velocity propagation of an incident electromagnetic wave simultaneously occur. Numerical analysis shows that the local electric field in the metamolecule can be enhanced by decreasing the electrode size and the gap of the capacitor structure of the cut-wire resonators while keeping the equivalent electrical circuit parameters of the metamolecule constant. We measure and compare the threshold incident power for a gas discharge in the metamolecule fabricated in our previous study and that in the metamolecule with shrunken capacitor structures. The experiment reveals that shrinking the capacitor structure while keeping the resonance frequency of the metamolecule decreases the threshold incident power for a gas discharge and may increase the gas pressure where the threshold incident power is minimum. Further development of this work will enable us to realize efficient nonlinear metamaterials that have atmospheric-pressure gas as a nonlinear element. △ Less

Submitted 11 July, 2021; originally announced August 2021.

Comments: 11 pages, 4 figures. This is the version of the article before peer review or editing, as submitted by an author to Journal of Physics D: Applied Physics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1361-6463/ac0d50

Journal ref: J. Phys. D: Appl. Phys. 54 385103 (2021)

Field-induced multiple metal-insulator crossovers of correlated Dirac electrons of perovskite CaIrO$_3$

Authors: R. Yamada, J. Fujioka, M. Kawamura, S. Sakai, M. Hirayama, R. Arita, T. Okawa, D. Hashizume, T. Sato, F. Kagawa, R. Kurihara, M. Tokunaga, Y. Tokura

Abstract: The interplay between electron correlation and topology of relativistic electrons may lead to a new stage of the research on quantum materials and emergent functions. The emergence of various collective electronic orderings/liquids, which are tunable by external stimuli, is a remarkable feature of correlated electron systems, but has rarely been realized in the topological semimetals with high-mob… ▽ More The interplay between electron correlation and topology of relativistic electrons may lead to a new stage of the research on quantum materials and emergent functions. The emergence of various collective electronic orderings/liquids, which are tunable by external stimuli, is a remarkable feature of correlated electron systems, but has rarely been realized in the topological semimetals with high-mobility relativistic electrons. Here, we report that the correlated Dirac electrons with the Mott criticality in perovskite CaIrO$_3$ show unconventional field-induced successive metal-insulator-metal crossovers in the quantum limit accompanying a giant magnetoresistance (MR) with MR ratio of 3,500 % (18 T and 1.4 K). The analysis shows that the insulating state originates from the collective electronic ordering such as charge/spin density wave promoted by electron correlation, whereas it turns into the quasi-one-dimensional metal at higher fields due to the field-induced reduction of chemical potential, highlighting the highly field-sensitive character of correlated Dirac electrons. △ Less

Submitted 2 August, 2021; originally announced August 2021.

Comments: 7 pages, 4 figures

Massive star formation in the Carina nebula complex and Gum 31 -- II. a cloud-cloud collision in Gum 31

Authors: Shinji Fujita, Hidetoshi Sano, Rei Enokiya, Katsuhiro Hayashi, Mikito Kohno, Kisetsu Tsuge, Kengo Tachihara, Atsushi Nishimura, Akio Ohama, Yumiko Yamane, Takahiro Ohno, Rin I. Yamada, Yasuo Fukui

Abstract: We present the results of analyses of the 12CO (J=1-0), 13CO (J=1-0), and 12CO (J=2-1) emission data toward Gum 31. Three molecular clouds separated in velocity were detected at -25, -20, and -10 km/s . The velocity structure of the molecular clouds in Gum 31 cannot be interpreted as expanding motion. Two of them, the -25 km/s cloud and the -20 km/s cloud, are likely associated with Gum 31, becaus… ▽ More We present the results of analyses of the 12CO (J=1-0), 13CO (J=1-0), and 12CO (J=2-1) emission data toward Gum 31. Three molecular clouds separated in velocity were detected at -25, -20, and -10 km/s . The velocity structure of the molecular clouds in Gum 31 cannot be interpreted as expanding motion. Two of them, the -25 km/s cloud and the -20 km/s cloud, are likely associated with Gum 31, because their 12CO (J=2-1)/12CO (J=1-0) intensity ratios are high. We found that these two clouds show the observational signatures of cloud-cloud collisions (CCCs): a complementary spatial distribution and a V-shaped structure (bridge features) in the position-velocity diagram. In addition, their morphology and velocity structures are very similar to the numerical simulations conducted by the previous studies. We propose a scenario that the -25 km/s cloud and the -20 km/s cloud were collided and triggered the formation of the massive star system HD 92206 in Gum 31. This scenario can explain the offset of the stars from the center and the morphology of Gum 31 simultaneously. The timescale of the collision was estimated to be ~1 Myr by using the ratio between the path length of the collision and the assumed velocity separation. This is consistent with that of the CCCs in Carina Nebula Complex in our previous study. △ Less

Submitted 14 July, 2021; v1 submitted 13 July, 2021; originally announced July 2021.

Comments: Accepted for publication in PASJ

The Lunar Geophysical Network Landing Sites Science Rationale

Authors: Heidi Fuqua Haviland, Renee C. Weber, Clive R. Neal, Philippe Lognonné, Raphaël F. Garcia, Nicholas Schmerr, Seiichi Nagihara, Robert Grimm, Douglas G. Currie, Simone Dell'Agnello, Thomas R. Watters, Mark P. Panning, Catherine L. Johnson, Ryuhei Yamada, Martin Knapmeyer, Lillian R. Ostrach, Taichi Kawamura, Noah Petro, Paul M. Bremner

Abstract: The Lunar Geophysical Network (LGN) mission is proposed to land on the Moon in 2030 and deploy packages at four locations to enable geophysical measurements for 6-10 years. Returning to the lunar surface with a long-lived geophysical network is a key next step to advance lunar and planetary science. LGN will greatly expand our primarily Apollo-based knowledge of the deep lunar interior by identify… ▽ More The Lunar Geophysical Network (LGN) mission is proposed to land on the Moon in 2030 and deploy packages at four locations to enable geophysical measurements for 6-10 years. Returning to the lunar surface with a long-lived geophysical network is a key next step to advance lunar and planetary science. LGN will greatly expand our primarily Apollo-based knowledge of the deep lunar interior by identifying and characterizing mantle melt layers, as well as core size and state. To meet the mission objectives, the instrument suite provides complementary seismic, geodetic, heat flow, and electromagnetic observations. We discuss the network landing site requirements and provide example sites that meet these requirements. Landing site selection will continue to be optimized throughout the formulation of this mission. Possible sites include the P-5 region within the Procellarum KREEP Terrane (PKT; (lat:$15^{\circ}$; long:$-35^{\circ}$), Schickard Basin (lat:$-44.3^{\circ}$; long:$-55.1^{\circ}$), Crisium Basin (lat:$18.5^{\circ}$; long:$61.8^{\circ}$), and the farside Korolev Basin (lat:$-2.4^{\circ}$; long:$-159.3^{\circ}$). Network optimization considers the best locations to observe seismic core phases, e.g., ScS and PKP. Ray path density and proximity to young fault scarps are also analyzed to provide increased opportunities for seismic observations. Geodetic constraints require the network to have at least three nearside stations at maximum limb distances. Heat flow and electromagnetic measurements should be obtained away from terrane boundaries and from magnetic anomalies at locations representative of global trends. An in-depth case study is provided for Crisium. In addition, we discuss the consequences for scientific return of less than optimal locations or number of stations. △ Less

Submitted 13 July, 2021; originally announced July 2021.

Comments: 34 pages, 12 figures, 3 tables, 1 appendix. Accepted manuscript, The Planetary Science Journal

A Kinematic Analysis of the Giant Molecular Complex W3; Possible Evidence for Cloud-Cloud Collisions that Triggered OB Star Clusters in W3 Main and W3(OH)

Authors: R. I. Yamada, H. Sano, K. Tachihara, R. Enokiya, A. Nishimura, S. Fujita, M. Kohno, John H. Bieging, Y. Fukui

Abstract: W3 is one of the most outstanding regions of high-mass star formation in the outer solar circle, including two active star-forming clouds, W3 Main and W3(OH). Based on a new analysis of the $^{12}$CO data obtained at 38$^{\prime\prime}$ resolution, we have found three clouds having molecular mass from 2000 to 8000~$M_\odot$ at velocities, $-50$~km s$^{-1}$, $-43$~km s$^{-1}$, and $-39$~km s… ▽ More W3 is one of the most outstanding regions of high-mass star formation in the outer solar circle, including two active star-forming clouds, W3 Main and W3(OH). Based on a new analysis of the $^{12}$CO data obtained at 38$^{\prime\prime}$ resolution, we have found three clouds having molecular mass from 2000 to 8000~$M_\odot$ at velocities, $-50$~km s$^{-1}$, $-43$~km s$^{-1}$, and $-39$~km s$^{-1}$. The $-43$~km s$^{-1}$ cloud is the most massive one, overlapping with the $-39$~km s$^{-1}$ cloud and the $-50$~km s$^{-1}$ cloud toward W3 Main and W3(OH), respectively. In W3 Main and W3(OH), we have found typical signatures of a cloud-cloud collision, i.e., the complementary distribution with/without a displacement between the two clouds and/or a V-shape in the position-velocity diagram. We frame a hypothesis that a cloud-cloud collision triggered the high-mass star formation in each region. The collision in W3 Main involves the $-39$~km s$^{-1}$ cloud and the $-43$~km s$^{-1}$ cloud. The collision likely produced a cavity in the $-43$~km s$^{-1}$ cloud having a size similar to the $-39$~km s$^{-1}$ cloud and triggered the formation of young high-mass stars in IC~1795 2 Myr ago. We suggest that the $-39$~km s$^{-1}$ cloud is still triggering the high-mass objects younger than 1 Myr embedded in W3 Main currently. On the other hand, another collision between the $-50$~km s$^{-1}$ cloud and the $-43$~km s$^{-1}$ cloud likely formed the heavily embedded objects in W3(OH) within $\sim$0.5 Myr ago. The present results favour an idea that cloud-cloud collisions are common phenomena not only in the inner solar circle but also in the outer solar circle, where the number of reported cloud-cloud collisions is yet limited (Fukui et al. 2021, PASJ, 73, S1). △ Less

Submitted 16 June, 2024; v1 submitted 3 June, 2021; originally announced June 2021.

Comments: 21 pages, 15 figures, 2 tables, accepted for publication in Publication of the Astronomical Society of Japan

Evidence for a Cloud-Cloud Collision in Sh2-233 Triggering the Formation of the High-mass Protostar Object IRAS 05358+3543

Authors: R. I. Yamada, Y. Fukui, H. Sano, K. Tachihara, John H. Bieging, R. Enokiya, A. Nishimura, S. Fujita, M. Kohno, Kisetsu Tsuge

Abstract: We have carried out a new kinematical analysis of the molecular gas in the Sh2-233 region by using the CO $J$ = 2-1 data taken at $\sim$0.5 pc resolution. The molecular gas consists of a filamentary cloud of 5-pc length with 1.5-pc width where two dense cloud cores are embedded. The filament lies between two clouds, which have a velocity difference of 2.6 km s$^{-1}$ and are extended over $\sim$5… ▽ More We have carried out a new kinematical analysis of the molecular gas in the Sh2-233 region by using the CO $J$ = 2-1 data taken at $\sim$0.5 pc resolution. The molecular gas consists of a filamentary cloud of 5-pc length with 1.5-pc width where two dense cloud cores are embedded. The filament lies between two clouds, which have a velocity difference of 2.6 km s$^{-1}$ and are extended over $\sim$5 pc. We frame a scenario that the two clouds are colliding with each other and compressed the gas between them to form the filament in $\sim$0.5 Myr which is perpendicular to the collision. It is likely that the collision formed not only the filamentary cloud but also the two dense cores. One of the dense cores is associated with the high-mass protostellar candidate IRAS 05358+3543, a representative high-mass protostar. In the monolithic collapse scheme of high mass star formation, a compact dense core of 100 $M_\odot$ within a volume of 0.1 pc radius is assumed as the initial condition, whereas the formation of such a core remained unexplained in the previous works. We argue that the proposed collision is a step which efficiently collects the gas of 100 $M_\odot$ into 0.1 pc radius. This lends support for that the cloud-cloud collision is an essential process in forming the compact high-mass dense core, IRAS 05358+3543. △ Less

Submitted 3 June, 2021; originally announced June 2021.

Comments: 12 pages, 10 figures, two tables, submitted to Monthly Notices of Royal Astronomical Society(MNRAS)

Pre-training without Natural Images

Authors: Hirokatsu Kataoka, Kazushige Okayasu, Asato Matsumoto, Eisuke Yamagata, Ryosuke Yamada, Nakamasa Inoue, Akio Nakamura, Yutaka Satoh

Abstract: Is it possible to use convolutional neural networks pre-trained without any natural images to assist natural image understanding? The paper proposes a novel concept, Formula-driven Supervised Learning. We automatically generate image patterns and their category labels by assigning fractals, which are based on a natural law existing in the background knowledge of the real world. Theoretically, the… ▽ More Is it possible to use convolutional neural networks pre-trained without any natural images to assist natural image understanding? The paper proposes a novel concept, Formula-driven Supervised Learning. We automatically generate image patterns and their category labels by assigning fractals, which are based on a natural law existing in the background knowledge of the real world. Theoretically, the use of automatically generated images instead of natural images in the pre-training phase allows us to generate an infinite scale dataset of labeled images. Although the models pre-trained with the proposed Fractal DataBase (FractalDB), a database without natural images, does not necessarily outperform models pre-trained with human annotated datasets at all settings, we are able to partially surpass the accuracy of ImageNet/Places pre-trained models. The image representation with the proposed FractalDB captures a unique feature in the visualization of convolutional layers and attentions. △ Less

Submitted 21 January, 2021; originally announced January 2021.

Comments: ACCV 2020 Best Paper Honorable Mention Award, Codes are publicly available: https://github.com/hirokatsukataoka16/FractalDB-Pretrained-ResNet-PyTorch

Quantum noise in a Fabry-Perot interferometer including the influence of diffraction loss of light

Authors: Shoki. Iwaguchi, Tomohiro. Ishikawa, Masaki. Ando, Yuta. Michimura, Kentaro. Komori, Koji. Nagano, Tomotada. Akutsu, Mitsuru. Musha, Rika. Yamada, Izumi. Watanabe, Takeo. Naito, Taigen. Morimoto, Seiji. Kawamura

Abstract: The DECi-hertz Interferometer Gravitational wave Observatory (DECIGO) is designed to detect gravitational waves at frequencies between 0.1 and 10 Hz. In this frequency band, one of the most important science targets is the detection of primordial gravitational waves. DECIGO plans to use a space interferometer with optical cavities to increase its sensitivity. For evaluating its sensitivity, diffra… ▽ More The DECi-hertz Interferometer Gravitational wave Observatory (DECIGO) is designed to detect gravitational waves at frequencies between 0.1 and 10 Hz. In this frequency band, one of the most important science targets is the detection of primordial gravitational waves. DECIGO plans to use a space interferometer with optical cavities to increase its sensitivity. For evaluating its sensitivity, diffraction of the laser light has to be adequately considered. There are two kinds of diffraction loss: leakage loss outside the mirror and higher-order mode loss. These effects are treated differently inside and outside of the Fabry-Perot (FP) cavity. We estimated them under the conditions that the FP cavity has a relatively high finesse and the higher-order modes do not resonate. As a result, we found that the effects can be represented as a reduction of the effective finesse of the cavity with regard to quantum noise. This result is useful for optimization of the design of DECIGO. This method is also applicable to all FP cavities with a relatively high finesse and significant diffraction loss in any interferometer. △ Less

Submitted 8 March, 2021; v1 submitted 23 December, 2020; originally announced December 2020.

Comments: 13 pages, 4 figures

Improvement of the target sensitivity in DECIGO by optimizing its parameters for quantum noise including the effect of diffraction loss

Authors: Tomohiro Ishikawa, Shoki Iwaguchi, Yuta Michimura, Masaki Ando, Rika Yamada, Izumi Watanabe, Koji Nagano, Tomotada Akutsu, Kentaro Komori, Mitsuru Musha, Takeo Naito, Taigen Morimoto, Seiji Kawamura

Abstract: DECIGO is the future Japanese gravitational wave detector in outer space. We previously set the default design parameters to provide a good target sensitivity to detect the primordial gravitational waves (GWs). However, the updated upper limit of the primordial GWs by the Planck observations motivated us for further optimization of the target sensitivity. Previously, we had not considered optical… ▽ More DECIGO is the future Japanese gravitational wave detector in outer space. We previously set the default design parameters to provide a good target sensitivity to detect the primordial gravitational waves (GWs). However, the updated upper limit of the primordial GWs by the Planck observations motivated us for further optimization of the target sensitivity. Previously, we had not considered optical diffraction loss due to the very long cavity length. In this paper, we optimize various DECIGO parameters by maximizing the signal-to-noise ratio (SNR), for the primordial GWs to quantum noise including the effects of diffraction loss. We evaluated the power spectrum density for one cluster in DECIGO utilizing the quantum noise of one differential Fabry-Perot interferometer. Then we calculated the SNR by correlating two clusters in the same position. We performed the optimization for two cases: the constant mirror-thickness case and the constant mirror-mass case. As a result, we obtained the SNR dependence on the mirror radius, which also determines various DECIGO parameters. This result is the first step toward optimizing the DECIGO design by considering the practical constraints on the mirror dimension and implementing other noise sources. △ Less

Submitted 9 March, 2021; v1 submitted 22 December, 2020; originally announced December 2020.

Comments: 13 pages, 12 figures

Reduction of quantum noise using the quantum locking with an optical spring for gravitational wave detectors

Authors: Rika Yamada, Yutaro Enomoto, Izumi Watanabe, Koji Nagano, Yuta Michimura, Atsushi Nishizawa, Kentaro Komori, Takeo Naito, Taigen Morimoto, Shoki Iwaguchi, Tomohiro Ishikawa, Masaki Ando, Akira Furusawa, Seiji Kawamura

Abstract: In our previous research, simulation showed that a quantum locking scheme with homodyne detection in sub-cavities is effective in surpassing the quantum noise limit for Deci-hertz Interferometer Gravitational Wave Observatory (DECIGO) in a limited frequency range. This time we have simulated an optical spring effect in the sub-cavities of the quantum locking scheme. We found that the optimized tot… ▽ More In our previous research, simulation showed that a quantum locking scheme with homodyne detection in sub-cavities is effective in surpassing the quantum noise limit for Deci-hertz Interferometer Gravitational Wave Observatory (DECIGO) in a limited frequency range. This time we have simulated an optical spring effect in the sub-cavities of the quantum locking scheme. We found that the optimized total quantum noise is reduced in a broader frequency band, compared to the case without the optical spring effect significantly improving the sensitivity of DECIGO to the primordial gravitational waves. △ Less

Submitted 20 December, 2020; originally announced December 2020.

Comments: 15 pages, 10 figures

Comparison of $pp$ and $p \bar{p}$ differential elastic cross sections and observation of the exchange of a colorless $C$-odd gluonic compound

Authors: V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, J. P. Agnew, G. D. Alexeev, G. Alkhazov, A. Alton, G. A. Alves, G. Antchev, A. Askew, P. Aspell, A. C. S. Assis Jesus, I. Atanassov, S. Atkins, K. Augsten, V. Aushev, Y. Aushev, V. Avati, C. Avila, F. Badaud, J. Baechler, L. Bagby, C. Baldenegro Barrera , et al. (451 additional authors not shown)

Abstract: We describe an analysis comparing the $p\bar{p}$ elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in $pp$ collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of $\sqrt{s} =$ 1.96 TeV are compared with the D0 measurement… ▽ More We describe an analysis comparing the $p\bar{p}$ elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in $pp$ collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of $\sqrt{s} =$ 1.96 TeV are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the $pp$ cross section. The two data sets disagree at the 3.4$σ$ level and thus provide evidence for the $t$-channel exchange of a colorless, $C$-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same $C$-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic scattering amplitude in $pp$ scattering. The combined significance of these results is larger than 5$σ$ and is interpreted as the first observation of the exchange of a colorless, $C$-odd gluonic compound. △ Less

Submitted 25 June, 2021; v1 submitted 7 December, 2020; originally announced December 2020.

Comments: D0 and TOTEM Collaborations

Journal ref: Phys. Rev. Lett. 127, 062003 (2021)

Development of the new multi-beam receiver and telescope control system for NASCO

Authors: Atsushi Nishimura, Akio Ohama, Kimihiro Kimura, Daichi Tsutsumi, Yudai Matsue, Rin Yamada, Mariko Sakamoto, Kenta Matsunaga, Yutaka Hasegawa, Taisei Minami, Takeru Matsumoto, Kazuki Shiotani, So Okuda, Kakeru Fujishiro, Keisuke Sakasai, Masahiro Suzuki, Shun Saeki, Kouki Satani, Kousuke Urushihara, Chiharu Kato, Takashi Kondo, Kazuki Okawa, Daiki Kurita, Tetsuta Inaba, Shohei Maruyama , et al. (37 additional authors not shown)

Abstract: We report the current status of the NASCO (NAnten2 Super CO survey as legacy) project which aims to provide all-sky CO data cube of southern hemisphere using the NANTEN2 4-m submillimeter telescope installed at the Atacama Desert through developing a new multi-beam receiver and a new telescope control system. The receiver consists of 5 beams. The four beams, located at the four corners of a square… ▽ More We report the current status of the NASCO (NAnten2 Super CO survey as legacy) project which aims to provide all-sky CO data cube of southern hemisphere using the NANTEN2 4-m submillimeter telescope installed at the Atacama Desert through developing a new multi-beam receiver and a new telescope control system. The receiver consists of 5 beams. The four beams, located at the four corners of a square with the beam separation of 720$''$, are installed with a 100 GHz band SIS receiver having 2-polarization sideband-separation filter. The other beam, located at the optical axis, is installed with a 200 GHz band SIS receiver having 2-polarization sideband-separation filter. The cooled component is modularized for each beam, and cooled mirrors are used. The IF bandwidths are 8 and 4 GHz for 100 and 200 GHz bands, respectively. Using XFFTS spectrometers with a bandwidth of 2 GHz, the lines of $^{12}$CO, $^{13}$CO, and C$^{18}$O of $J$=1$-$0 or $J$=2$-$1 can be observed simultaneously for each beam. The control system is reconstructed on the ROS architecture, which is an open source framework for robot control, to enable a flexible observation mode and to handle a large amount of data. The framework is commonly used and maintained in a robotic field, and thereby reliability, flexibility, expandability, and efficiency in development are improved as compared with the system previously used. The receiver and control system are installed on the NANTEN2 telescope in December 2019, and its commissioning and science verification are on-going. We are planning to start science operation in early 2021. △ Less

Submitted 1 December, 2020; v1 submitted 30 November, 2020; originally announced November 2020.

Comments: submitted to SPIE Astronomical Telescopes + Instrumentation (AS20), paper No. 11453-146

Current status of space gravitational wave antenna DECIGO and B-DECIGO

Authors: Seiji Kawamura, Masaki Ando, Naoki Seto, Shuichi Sato, Mitsuru Musha, Isao Kawano, Jun'ichi Yokoyama, Takahiro Tanaka, Kunihito Ioka, Tomotada Akutsu, Takeshi Takashima, Kazuhiro Agatsuma, Akito Araya, Naoki Aritomi, Hideki Asada, Takeshi Chiba, Satoshi Eguchi, Motohiro Enoki, Masa-Katsu Fujimoto, Ryuichi Fujita, Toshifumi Futamase, Tomohiro Harada, Kazuhiro Hayama, Yoshiaki Himemoto, Takashi Hiramatsu , et al. (62 additional authors not shown)

Abstract: Deci-hertz Interferometer Gravitational Wave Observatory (DECIGO) is the future Japanese space mission with a frequency band of 0.1 Hz to 10 Hz. DECIGO aims at the detection of primordial gravitational waves, which could be produced during the inflationary period right after the birth of the universe. There are many other scientific objectives of DECIGO, including the direct measurement of the acc… ▽ More Deci-hertz Interferometer Gravitational Wave Observatory (DECIGO) is the future Japanese space mission with a frequency band of 0.1 Hz to 10 Hz. DECIGO aims at the detection of primordial gravitational waves, which could be produced during the inflationary period right after the birth of the universe. There are many other scientific objectives of DECIGO, including the direct measurement of the acceleration of the expansion of the universe, and reliable and accurate predictions of the timing and locations of neutron star/black hole binary coalescences. DECIGO consists of four clusters of observatories placed in the heliocentric orbit. Each cluster consists of three spacecraft, which form three Fabry-Perot Michelson interferometers with an arm length of 1,000 km. Three clusters of DECIGO will be placed far from each other, and the fourth cluster will be placed in the same position as one of the three clusters to obtain the correlation signals for the detection of the primordial gravitational waves. We plan to launch B-DECIGO, which is a scientific pathfinder of DECIGO, before DECIGO in the 2030s to demonstrate the technologies required for DECIGO, as well as to obtain fruitful scientific results to further expand the multi-messenger astronomy. △ Less

Submitted 24 June, 2020; originally announced June 2020.

Comments: 10 pages, 3 figures

A kinematic analysis of the CO clouds toward a reflection nebula NGC 2023 observed with the Nobeyama 45 m telescope; Further evidence for a cloud-cloud collision in the Orion region

Authors: R. Yamada, R. Enokiya, H. Sano, S. Fujita, M. Kohno, D. Tsutsumi, A. Nishimura, K. Tachihara, Y. Fukui

Abstract: We have analyzed new CO($J$ = 1-0) data in the region of a reflection nebula NGC 2023 with a particular focus on the detailed kinematical properties of the molecular gas. The results show that there are two velocity components which indicate signatures of dynamical interaction revealed at a high resolution of 19$''$ (= 0.04 pc). Based on the results we propose a hypothesis that two clouds collided… ▽ More We have analyzed new CO($J$ = 1-0) data in the region of a reflection nebula NGC 2023 with a particular focus on the detailed kinematical properties of the molecular gas. The results show that there are two velocity components which indicate signatures of dynamical interaction revealed at a high resolution of 19$''$ (= 0.04 pc). Based on the results we propose a hypothesis that two clouds collided with each other and triggered the formation of the B1.5 star HD 37903 in addition to 20 lower mass stars in two small clusters with a size of 2 pc. Although the previous study favored a scheme of triggering by the HII region (e.g., Mookerjea et al. 2009), the present results show that the effect of the HII region is limited only to the surface of the molecular cloud, and does not contribute to the gas compression and star formation. The present results lend support for the dominant role of cloud-cloud collision in forming high mass stars in addition to $\sim$20 lower mass stars, which are also likely formed by the collision. The present case suggests all the high mass stars in the Orion region are formed by cloud-cloud collision. △ Less

Submitted 5 June, 2020; originally announced June 2020.

Comments: 18 pages, 8 figures, one table, submitted to Publications of Astronomical Society of Japan (PASJ)

Triggered high-mass star formation in the HII region W28A2: A cloud-cloud collision scenario

Authors: Katsuhiro Hayashi, Satoshi Yoshiike, Rei Enokiya, Shinji Fujita, Rin Yamada, Hidetoshi Sano, Kazufumi Torii, Mikito Kohno, Atsushi Nishimura, Akio Ohama, Hiroaki Yamamoto, Kengo Tachihara, Graeme Wong, Nigel Maxted, Catherine Braiding, Gavin Rowell, Michael Burton, Yasuo Fukui

Abstract: We report on a study of the high-mass star formation in the the HII region W28A2 by investigating the molecular clouds extended over ~5-10 pc from the exciting stars using the 12CO and 13CO (J=1-0) and 12CO (J=2-1) data taken by the NANTEN2 and Mopra observations. These molecular clouds consist of three velocity components with the CO intensity peaks at V_LSR ~ -4 km s$^{-1}$, 9 km s$^{-1}$ and 16… ▽ More We report on a study of the high-mass star formation in the the HII region W28A2 by investigating the molecular clouds extended over ~5-10 pc from the exciting stars using the 12CO and 13CO (J=1-0) and 12CO (J=2-1) data taken by the NANTEN2 and Mopra observations. These molecular clouds consist of three velocity components with the CO intensity peaks at V_LSR ~ -4 km s$^{-1}$, 9 km s$^{-1}$ and 16 km s$^{-1}$. The highest CO intensity is detected at V_LSR ~ 9 km s$^{-1}$, where the high-mass stars with the spectral types of O6.5-B0.5 are embedded. We found bridging features connecting these clouds toward the directions of the exciting sources. Comparisons of the gas distributions with the radio continuum emission and 8 um infrared emission show spatial coincidence/anti-coincidence, suggesting physical associations between the gas and the exciting sources. The 12CO J=2-1 to 1-0 intensity ratio shows a high value (> 0.8) toward the exciting sources for the -4 km s$^{-1}$ and +9 km s$^{-1}$ clouds, possibly due to heating by the high-mass stars, whereas the intensity ratio at the CO intensity peak (V_LSR ~ 9 km s$^{-1}$) lowers down to ~0.6, suggesting self absorption by the dense gas in the near side of the +9 km s$^{-1}$ cloud. We found partly complementary gas distributions between the -4 km s$^{-1}$ and +9 km s$^{-1}$ clouds, and the -4 km s$^{-1}$ and +16 km s$^{-1}$ clouds. The exciting sources are located toward the overlapping region in the -4 km s$^{-1}$ and +9 km s$^{-1}$ clouds. Similar gas properties are found in the Galactic massive star clusters, RCW 38 and NGC 6334, where an early stage of cloud collision to trigger the star formation is suggested. Based on these results, we discuss a possibility of the formation of high-mass stars in the W28A2 region triggered by the cloud-cloud collision. △ Less

Submitted 16 May, 2020; originally announced May 2020.

Comments: 26 pages, 16 figures, Accepted for publication in PASJ

Massive star formation in the Carina nebula complex and Gum 31 -- I. The Carina nebula complex

Authors: Shinji Fujita, Hidetoshi Sano, Rei Enokiya, Katsuhiro Hayashi, Mikito Kohno, Kisetsu Tsuge, Kengo Tachihara, Atsushi Nishimura, Akio Ohama, Yumiko Yamane, Takahiro Ohno, Rin Yamada, Yasuo Fukui

Abstract: Herein, we present results from observations of the 12CO (J=1-0), 13CO (J=1-0), and 12CO (J=2-1) emission lines toward the Carina nebula complex (CNC) obtained with the Mopra and NANTEN2 telescopes. We focused on massive-star-forming regions associated with the CNC including the three star clusters Tr14, Tr15, and Tr16, and the isolated WR-star HD92740. We found that the molecular clouds in the CN… ▽ More Herein, we present results from observations of the 12CO (J=1-0), 13CO (J=1-0), and 12CO (J=2-1) emission lines toward the Carina nebula complex (CNC) obtained with the Mopra and NANTEN2 telescopes. We focused on massive-star-forming regions associated with the CNC including the three star clusters Tr14, Tr15, and Tr16, and the isolated WR-star HD92740. We found that the molecular clouds in the CNC are separated into mainly four clouds at velocities -27, -20, -14, and -8 km/s. Their masses are 0.7x10^4Msun, 5.0x10^4 Msun, 1.6x10^4 Msun, and 0.7x10^4 Msun, respectively. Most are likely associated with the star clusters, because of their high 12CO (J=2-1)/12CO (J=1-0) intensity ratios and their correspondence to the Spitzer 8 micron distributions. In addition, these clouds show the observational signatures of cloud--cloud collisions. In particular, there is a V-shaped structure in the position--velocity diagram and a complementary spatial distribution between the -20 km/s cloud and the -14 km/s cloud. Based on these observational signatures, we propose a scenario wherein the formation of massive stars in the clusters was triggered by a collision between the two clouds. By using the path length of the collision and the assumed velocity separation, we estimate the timescale of the collision to be ~1 Myr. This is comparable to the ages of the clusters estimated in previous studies. △ Less

Submitted 15 September, 2020; v1 submitted 30 March, 2020; originally announced March 2020.

Optimization of quantum noise by completing the square of multiple interferometer outputs in quantum locking for gravitational wave detectors

Authors: Rika Yamada, Yutaro Enomoto, Atsushi Nishizawa, Koji Nagano, Sachiko Kuroyanagi, Keiko Kokeyama, Kentaro Komori, Yuta Michimura, Takeo Naito, Izumi Watanabe, Taigen Morimoto, Masaki Ando, Akira Furusawa, Seiji Kawamura

Abstract: The quantum locking technique, which uses additional short low-loss sub-cavities, is effective in reducing quantum noise in space gravitational wave antenna DECIGO. However, the quantum noise of the main interferometer depends on the control systems in the sub-cavities. Here we demonstrate a new method to optimize the quantum noise independently of the feedback gain by completing the square in the… ▽ More The quantum locking technique, which uses additional short low-loss sub-cavities, is effective in reducing quantum noise in space gravitational wave antenna DECIGO. However, the quantum noise of the main interferometer depends on the control systems in the sub-cavities. Here we demonstrate a new method to optimize the quantum noise independently of the feedback gain by completing the square in the quantum locking system. We successfully demonstrate in simulations that this method is effective in optimizing the homodyne angle to the best quantum-noise-limited sensitivity. △ Less

Submitted 21 December, 2020; v1 submitted 29 March, 2020; originally announced March 2020.

Comments: 9 pages, 9 figures

First-principles calculation of electronic density of states and Seebeck coefficient in transition-metal-doped Si-Ge alloys

Authors: Ryo Yamada, Akira Masago, Tetsuya Fukushima, Hikari Shinya, Tien Quang Nguyen, Kazunori Sato

Abstract: High $ZT$ value and large Seebeck coefficient have been reported in the nanostructured Fe-doped Si-Ge alloys. In this work, the large Seebeck coefficient in Fe-doped Si-Ge systems is qualitatively reproduced from the computed electronic density of states, where a hybrid functional, HSE06, is used for an exchange-correlation functional, as well as a special quasi-random structure (SQS) for a disord… ▽ More High $ZT$ value and large Seebeck coefficient have been reported in the nanostructured Fe-doped Si-Ge alloys. In this work, the large Seebeck coefficient in Fe-doped Si-Ge systems is qualitatively reproduced from the computed electronic density of states, where a hybrid functional, HSE06, is used for an exchange-correlation functional, as well as a special quasi-random structure (SQS) for a disordered atomic configuration. Furthermore, by replacing Fe with other transition metals, such as Mn, Co, Ni, Cu, Zn, and Au, a better dopant that produces a larger Seebeck coefficient in Si-Ge alloy systems is explored. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: 6 pages

An approach to constrain models of accreting neutron stars with the use of an equation of state

Authors: Akira Dohi, Masa-aki Hashimoto, Rio Yamada, Yasuhide Matsuo, Masayuki Fujimoto

Abstract: We investigate X-ray bursts during the thermal evolution of an accreting neutron star which corresponds to the X-ray burster GS\ 1826-24. Physical quantities of the neutron star are included using an equation of state below and above the nuclear matter density. We adopt an equation of state and construct an approximate network that saves the computational time and calculates nuclear energy generat… ▽ More We investigate X-ray bursts during the thermal evolution of an accreting neutron star which corresponds to the X-ray burster GS\ 1826-24. Physical quantities of the neutron star are included using an equation of state below and above the nuclear matter density. We adopt an equation of state and construct an approximate network that saves the computational time and calculates nuclear energy generation rates accompanying the abundance evolutions. The mass and radius of the neutron star are got by solving the stellar evolution equations from the center to the surface which involve necessary information such as the nuclear energy generation in accreting layers, heating from the crust, and neutrino emissions inside the stellar core. We reproduce the light curve and recurrence time of the X-ray burst from GS 1826-24 within the standard deviation of 1$σ$ for the assumed accretion rate, metallicity, and equation of state. It is concluded that the observed recurrence time is consistent with the theoretical model having metallicity of the initial CNO elements $Z_{\rm CNO}$ = 0.01. We suggest that the nuclear reaction rates responsible for the $rp$-process should be examined in detail, because the rates may change the shape of the light curve and our conclusion. △ Less

Submitted 22 January, 2020; originally announced January 2020.

Comments: 11 pages, 11 figures, accepted for publication in PTEP

High-mass star formation in Orion B triggered by cloud-cloud collision: Merging molecular clouds in NGC 2024

Authors: Rei Enokiya, Akio Ohama, Rin Yamada, Hidetoshi Sano, Shinji Fujita, Katsuhiro Hayashi, Daichi Tsutsumi, Kazufumi Torii, Atsushi Nishimura, Ryotaro konishi, Hiroaki Yamamoto, Kengo Tachihara, Yutaka Hasagawa, Kimihiro Kimura, Hideo Ogawa, Yasuo Fukui

Abstract: We performed new comprehensive $^{13}$CO($J$=2--1) observations toward NGC 2024, the most active star forming region in Orion B, with an angular resolution of $\sim$100'' obtained with NANTEN2. We found that the associated cloud consists of two independent velocity components. The components are physically connected to the H{\sc ii} region as evidenced by their close correlation with the dark lane… ▽ More We performed new comprehensive $^{13}$CO($J$=2--1) observations toward NGC 2024, the most active star forming region in Orion B, with an angular resolution of $\sim$100'' obtained with NANTEN2. We found that the associated cloud consists of two independent velocity components. The components are physically connected to the H{\sc ii} region as evidenced by their close correlation with the dark lanes and the emission nebulosity. The two components show complementary distribution with a displacement of $\sim$0.6 pc. Such complementary distribution is typical to colliding clouds discovered in regions of high-mass star formation. We hypothesize that a cloud-cloud collision between the two components triggered the formation of the late O-type stars and early B stars localized within 0.3 pc of the cloud peak. The duration time of the collision is estimated to be 0.3 million years from a ratio of the displacement and the relative velocity $\sim$3 km s$^{-1}$ corrected for probable projection. The high column density of the colliding cloud $\sim$10$^{23}$ cm$^{-2}$ is similar to those in the other high-mass star clusters in RCW 38, Westerlund 2, NGC 3603, and M42, which are likely formed under trigger by cloud-cloud collision. The present results provide an additional piece of evidence favorable to high-mass star formation by a major cloud-cloud collision in Orion. △ Less

Submitted 2 May, 2020; v1 submitted 25 December, 2019; originally announced December 2019.

Comments: 17 pages, 13 figures, accepted for PASJ. arXiv admin note: substantial text overlap with arXiv:1706.05652

Origin of the Phase Separation into B2 and L21 Ordered Phases in the X-Al-Ti (X: Fe, Co, and Ni) Alloys from the First-principles Cluster Variation Method

Authors: Ryo Yamada, Tetsuo Mohri

Abstract: The phase separation behaviors from the single B2 ordered phase into the two separate B2 and L2$_1$ ordered phases in the X-Al-Ti (X: Fe, Co, and Ni) alloys are analyzed using the cluster variation method (CVM) with the interaction energies evaluated from the electronic band structure calculations. The cubic approximation of the CVM is employed for the X$_2$Al$_{2-x}$Ti$_x$ ($0 \leq x \leq 2$) all… ▽ More The phase separation behaviors from the single B2 ordered phase into the two separate B2 and L2$_1$ ordered phases in the X-Al-Ti (X: Fe, Co, and Ni) alloys are analyzed using the cluster variation method (CVM) with the interaction energies evaluated from the electronic band structure calculations. The cubic approximation of the CVM is employed for the X$_2$Al$_{2-x}$Ti$_x$ ($0 \leq x \leq 2$) alloys limiting an interchange between Al and Ti atoms on the $α$- and $β$-sublattices of the L2$_1$ ordered structure with the X atoms fixed on the $γ$-sublattice. The phase stabilities of the B2 and L2$_1$ structures are examined, and the phase diagrams at the pseudo-binary section, XAl-XTi, are determined. The two-phase regions of B2 and L2$_1$ phases, i.e., phase separation behavior, are successfully produced in both Co- and Ni-Al-Ti alloy systems, whereas no phase separation is predicted in the Fe-Al-Ti alloy. The origin of the phase separation in the Co- and Ni-Al-Ti alloys is, respectively, attributed to the mechanical instability and the combination of mechanical instability and chemical repulsions of unlike pairs. △ Less

Submitted 21 October, 2019; originally announced October 2019.

Comments: 8 pages, 5 figures

Extension of Sinkhorn Method: Optimal Movement Estimation of Agents Moving at Constant Velocity

Authors: Daigo Okada, Naotoshi Nakamura, Takuya Wada, Ayako Iwasaki, Ryo Yamada

Abstract: In the field of bioimaging, an important part of analyzing the motion of objects is tracking. We propose a method that applies the Sinkhorn distance for solving the optimal transport problem to track objects. The advantage of this method is that it can flexibly incorporate various assumptions in tracking as a cost matrix. First, we extend the Sinkhorn distance from two dimensions to three dimensio… ▽ More In the field of bioimaging, an important part of analyzing the motion of objects is tracking. We propose a method that applies the Sinkhorn distance for solving the optimal transport problem to track objects. The advantage of this method is that it can flexibly incorporate various assumptions in tracking as a cost matrix. First, we extend the Sinkhorn distance from two dimensions to three dimensions. Using this three-dimensional distance, we compare the performance of two types of tracking technique, namely tracking that associates objects that are close to each other, which conventionally uses the nearest-neighbor method, and tracking that assumes that the object is moving at constant velocity, using three types of simulation data. The results suggest that when tracking objects moving at constant velocity, our method is superior to conventional nearest-neighbor tracking as long as the added noise is not excessively large. We show that the Sinkhorn method can be applied effectively to object tracking. Our simulation data analysis suggests that when objects are moving at constant velocity, our method, which sets acceleration as a cost, outperforms the traditional nearest-neighbor method in terms of tracking objects. To apply the proposed method to real bioimaging data, it is necessary to set an appropriate cost indicator based on the movement features. △ Less

Submitted 11 July, 2019; originally announced July 2019.

Comments: 12 pages, 7 figures, 2 tables

MSC Class: 92C55

Journal ref: Transactions of the Japanese Society for Artificial Intelligence 34.5 (2019) D-J13_1-7

Application of Cluster Variation and Path Probability Methods to the Tetragonal-Cubic Phase Transition in ZrO2

Authors: Ryo Yamada, Tetsuo Mohri

Abstract: Cluster variation method (CVM) and path probability method (PPM) have generally been employed to study replacive phase transitions in alloy systems. Recently, displacive phase transitions have been explored within the realm of replacive phase transition in the CVM theoretical framework by viewing displaced atoms as different atomic species, i.e., by converting a freedom of atomic displacement to a… ▽ More Cluster variation method (CVM) and path probability method (PPM) have generally been employed to study replacive phase transitions in alloy systems. Recently, displacive phase transitions have been explored within the realm of replacive phase transition in the CVM theoretical framework by viewing displaced atoms as different atomic species, i.e., by converting a freedom of atomic displacement to a configurational freedom. The same methodology is applied to the PPM calculations in this work, and the kinetics of displacive phase transition from tetragonal to cubic phases in ZrO2 are investigated as well as their equilibrium states. △ Less

Submitted 31 March, 2019; originally announced April 2019.

Comments: 5 pages, 4 figures

Atomistic Relaxation Process in a Ni3Al Ordered Phase Using Path Probability Method with Vacancy Mechanisms

Authors: Ryo Yamada, Tetsuo Mohri

Abstract: The path probability method (PPM), which is a natural extension of the cluster variation method (CVM) to a time domain, has been employed in a relaxation process of atomic configurations in alloy systems. Although the vacancy mechanism is the main atomic migration process in an alloy system, most studies of PPM have used the spin flipping mechanism (or the direct exchange mechanism) because of the… ▽ More The path probability method (PPM), which is a natural extension of the cluster variation method (CVM) to a time domain, has been employed in a relaxation process of atomic configurations in alloy systems. Although the vacancy mechanism is the main atomic migration process in an alloy system, most studies of PPM have used the spin flipping mechanism (or the direct exchange mechanism) because of the huge computational burden imposed by the vacancy mechanism. In this paper the computational problem is circumvented by treating various path variables in the PPM as cluster probabilities in the CVM, and the vacancy mechanism is explicitly taken into account in the theoretical framework. The method is employed to explore the relaxation process in a Ni3Al ordered phase within the tetrahedron approximation, and the effect of vacancy concentration is investigated. △ Less

Submitted 22 January, 2019; originally announced January 2019.

Comments: 6 pages, 4 figures

Conversion of magnetic freedoms into atomic configurational freedoms within the Cluster Variation Method

Authors: Ryo Yamada, Tetsuo Mohri

Abstract: The continuous displacement cluster variation method (CDCVM) has introduced local atomic displacements into the theoretical framework of the cluster variation method (CVM) by viewing an atom displaced from a Bravais lattice point as a particular atomic species located at the lattice point. This idea of conversion from a freedom of local displacements into configurational freedom is extended in thi… ▽ More The continuous displacement cluster variation method (CDCVM) has introduced local atomic displacements into the theoretical framework of the cluster variation method (CVM) by viewing an atom displaced from a Bravais lattice point as a particular atomic species located at the lattice point. This idea of conversion from a freedom of local displacements into configurational freedom is extended in this paper to magnetic freedoms. Various magnitudes of local magnetic moments are considered, as well as two spin directions, on up-spins and down-spins. The approach is applied to pure Ni and its Curie temperature is explored with the entropy formula of the tetrahedron approximation in the CVM, using the first-nearest-neighbor pair interaction energies extracted from the total energies of various spin configurations, which are estimated from electronic-structure calculations. △ Less

Submitted 22 January, 2019; originally announced January 2019.

Comments: 18 pages, 10 figures

Steepest-Entropy-Ascent Quantum Thermodynamics Models in Materials Science

Authors: Ryo Yamada, Michael R. von Spakovsky, William T. Reynolds Jr

Abstract: Steepest-entropy-ascent quantum thermodynamics, or SEAQT, is a unified approach of quantum mechanics and thermodynamics that avoids many of the inconsistencies that can arise between the two theories. Given a set of energy levels, i.e., energy eigenstructure, accessible to a given physical system, SEAQT predicts the unique kinetic path from any initial non-equilibrium state to stable equilibrium b… ▽ More Steepest-entropy-ascent quantum thermodynamics, or SEAQT, is a unified approach of quantum mechanics and thermodynamics that avoids many of the inconsistencies that can arise between the two theories. Given a set of energy levels, i.e., energy eigenstructure, accessible to a given physical system, SEAQT predicts the unique kinetic path from any initial non-equilibrium state to stable equilibrium by solving a master equation that directs the system along the path of steepest entropy ascent. There are no intrinsic limitations on the length and time scales the method can treat so it is well-suited for calculations where the dynamics over multiple spacial scales need to be taken into account within a single framework. In this paper, the theoretical framework and its advantages are described, and several applications are presented to illustrate the use of the SEAQT equation of motion and the construction of a simplified, reduced-order, energy eigenstructure. △ Less

Submitted 18 October, 2018; originally announced October 2018.

Comments: 18 pages

Kinetic Pathways of Phase Decomposition Using Steepest-Entropy-Ascent Quantum Thermodynamics Modeling. Part II: Phase Separation and Ordering

Authors: Ryo Yamada, Michael R. von Spakovsky, William T. Reynolds, Jr

Abstract: The kinetics of ordering and concurrent ordering and clustering is analyzed with an equation of motion initially developed to account for dissipative processes in quantum systems. A simplified energy eigenstructure, or pseudo-eigenstructure, is constructed from a static concentration wave method to describe the configuration-dependent energy for atomic ordering and clustering in a binary alloy. Th… ▽ More The kinetics of ordering and concurrent ordering and clustering is analyzed with an equation of motion initially developed to account for dissipative processes in quantum systems. A simplified energy eigenstructure, or pseudo-eigenstructure, is constructed from a static concentration wave method to describe the configuration-dependent energy for atomic ordering and clustering in a binary alloy. This pseudo-eigenstructure is used in conjunction with an equation of motion that follows steepest entropy ascent to calculate the kinetic path that leads to ordering and clustering in a series of hypothetical alloys. By adjusting the thermodynamic solution parameters, it is demonstrated that the model can predict the stable equilibrium state as well as the unique thermodynamic path and kinetics of continuous/discontinuous ordering and concurrent processes of simultaneous ordering and phase separation. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Comments: 10 pages

Kinetic Pathways of Phase Decomposition Using Steepest-Entropy-Ascent Quantum Thermodynamics Modeling. Part I: Continuous and Discontinuous Transformations

Authors: Ryo Yamada, Michael R. von Spakovsky, William T. Reynolds, Jr

Abstract: The decomposition kinetics of a solid-solution into separate phases are analyzed with an equation of motion initially developed to account for dissipative processes in quantum systems. This equation and the steepest-entropy-ascent quantum thermodynamic framework of which it is a part make it possible to track kinetic processes in systems in non-equilibrium, while retaining the framework of classic… ▽ More The decomposition kinetics of a solid-solution into separate phases are analyzed with an equation of motion initially developed to account for dissipative processes in quantum systems. This equation and the steepest-entropy-ascent quantum thermodynamic framework of which it is a part make it possible to track kinetic processes in systems in non-equilibrium, while retaining the framework of classical equilibrium thermodynamics. The general equation of motion is particularized for the case of the decomposition of a binary alloy, and a solution model is used to build an approximate energy eigenstructure, or pseudo-eigenstructure, for the alloy system. This equation is then solved with the pseudo-eigenstructure to obtain a unique reaction path and the decomposition kinetics of the alloy. For a hypothetical solid-solution with a miscibility gap at low temperatures, the conditions under which this framework predicts a continuous transformation path (spinodal decomposition) or a discontinuous one (nucleation and growth) are demonstrated. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Comments: 12 pages

Journal ref: Phys. Rev. E 99, 052121 (2019)

Low-temperature Atomistic Spin Relaxation and Non-equilibrium Intensive Properties Using Steepest-Entropy-Ascent Quantum-Inspired Thermodynamics Modeling

Authors: Ryo Yamada, Michael R. von Spakovsky, William T. Reynolds Jr

Abstract: The magnetization of body-centered cubic iron at low temperatures is calculated with the steepest-entropy-ascent quantum thermodynamics (SEAQT) framework. This framework assumes that a thermodynamic property in an isolated system traces the path through state space with the greatest entropy production. Magnetization is calculated from the expected value of a thermodynamic ensemble of quantized spi… ▽ More The magnetization of body-centered cubic iron at low temperatures is calculated with the steepest-entropy-ascent quantum thermodynamics (SEAQT) framework. This framework assumes that a thermodynamic property in an isolated system traces the path through state space with the greatest entropy production. Magnetization is calculated from the expected value of a thermodynamic ensemble of quantized spin waves based on the Heisenberg spin model applied to an ensemble of coupled harmonic oscillators. A realistic energy landscape is obtained from a magnon dispersion relation calculated using spin-density-functional-theory. The equilibrium magnetization as well as the evolution of magnetization from a non-equilibrium state to equilibrium are calculated from the path of steepest entropy ascent determined from the SEAQT equation of motion in state space. The framework makes it possible to model the temperature- and time-dependence of magnetization without a detailed description of magnetic damping. The approach is also used to define intensive properties (temperature and magnetic field strength) that are fundamentally, i.e., canonically or grand canonically, valid for any non-equilibrium state. Given the assumed magnon dispersion relation, the SEAQT framework is used to calculate the equilibrium magnetization at different temperatures and external magnetic fields and the results are shown to closely agree with experiment for temperatures less than 500 K. The time-dependent evolution of magnetization from different initial states and interactions with a reservoir is also predicted. △ Less

Submitted 28 June, 2019; v1 submitted 27 September, 2018; originally announced September 2018.

Comments: 11 pages