-
Radiation and outflow properties of super-Eddington accretion flows around various mass classes of black holes: Dependence on the accretion rates
Authors:
Shogo Yoshioka,
Shin Mineshige,
Ken Ohsuga,
Tomohisa Kawashima,
Takaaki Kitaki
Abstract:
We perform axisymmetric two-dimensional radiation-hydrodynamic simulations of super-Eddington accretion flow and outflow around black holes to examine the properties of radiation and outflow as functions of the black hole mass and the accretion rate onto the black hole ($\dot M_{\rm BH}$). We find that the $\dot{m}_{\rm BH} (\equiv \dot{M}_{\rm BH}c^2 /L_{\rm Edd})$ dependence of…
▽ More
We perform axisymmetric two-dimensional radiation-hydrodynamic simulations of super-Eddington accretion flow and outflow around black holes to examine the properties of radiation and outflow as functions of the black hole mass and the accretion rate onto the black hole ($\dot M_{\rm BH}$). We find that the $\dot{m}_{\rm BH} (\equiv \dot{M}_{\rm BH}c^2 /L_{\rm Edd})$ dependence of $L_{\rm rad}/L_{\rm Edd}$ and $L_{\rm mech}/L_{\rm Edd}$ found for stellar-mass black hole can apply to the high mass cases, where $L_{\rm rad}$ is the radiation luminosity, $L_{\rm mech}$ is the mechanical luminosity, $c$ is the speed of light, and $L_{\rm Edd}$ is the Eddington luminosity. Such universalities can appear in the regime, in which electron scattering opacity dominates over absorption opacity. Further, the normalized isotropic mechanical luminosity $L_{\rm mech}^{\rm ISO}/L_{\rm Edd}$ (evaluated by normalized density and velocity at $θ=10^\circ$) exhibits a broken power-law relationship with ${\dot m}_{\rm BH}$; $L_{\rm mech}^{\rm ISO}/ L_{\rm Edd} \propto{\dot m}_{\rm BH}^{2.7}$ (or $\propto {\dot m}_{\rm BH}^{0.7}$) below (above) ${\dot m}_{\rm BH}\sim 400$. This is because the radial velocity stays nearly constant (or even decreases) below (above) the break with increase of $\dot m_{\rm BH}$. We also find that the luminosity ratio is $L_{\rm mech}/L_{\rm rad}^{\rm ISO} \sim$ 0.05 at ${\dot m}_{\rm BH} \sim 100$, which is roughly consistent with the observations of NLS1, 1H 0323+103.
△ Less
Submitted 22 July, 2024;
originally announced July 2024.
-
The Japanese Vision for the Black Hole Explorer Mission
Authors:
Kazunori Akiyama,
Kotaro Niinuma,
Kazuhiro Hada,
Akihiro Doi,
Yoshiaki Hagiwara,
Aya E. Higuchi,
Mareki Honma,
Tomohisa Kawashima,
Dimitar Kolev,
Shoko Koyama,
Sho Masui,
Ken Ohsuga,
Hidetoshi Sano,
Hideki Takami,
Yuh Tsunetoe,
Yoshinori Uzawa,
Takuya Akahori,
Yuto Akiyama,
Peter Galison,
Takayuki J. Hayashi,
Tomoya Hirota,
Makoto Inoue,
Yuhei Iwata,
Michael D. Johnson,
Motoki Kino
, et al. (21 additional authors not shown)
Abstract:
The Black Hole Explorer (BHEX) is a next-generation space very long baseline interferometry (VLBI) mission concept that will extend the ground-based millimeter/submillimeter arrays into space. The mission, closely aligned with the science priorities of the Japanese VLBI community, involves an active engagement of this community in the development of the mission, resulting in the formation of the B…
▽ More
The Black Hole Explorer (BHEX) is a next-generation space very long baseline interferometry (VLBI) mission concept that will extend the ground-based millimeter/submillimeter arrays into space. The mission, closely aligned with the science priorities of the Japanese VLBI community, involves an active engagement of this community in the development of the mission, resulting in the formation of the Black Hole Explorer Japan Consortium. Here we present the current Japanese vision for the mission, ranging from scientific objectives to instrumentation. The Consortium anticipates a wide range of scientific investigations, from diverse black hole physics and astrophysics studied through the primary VLBI mode, to the molecular universe explored via a potential single-dish observation mode in the previously unexplored 50-70\,GHz band that would make BHEX the highest-sensitivity explorer ever of molecular oxygen. A potential major contribution for the onboard instrument involves supplying essential elements for its high-sensitivity dual-band receiving system, which includes a broadband 300\,GHz SIS mixer and a space-certified multi-stage 4.5K cryocooler akin to those used in the Hitomi and XRISM satellites by the Japan Aerospace Exploration Agency. Additionally, the Consortium explores enhancing and supporting BHEX operations through the use of millimeter/submillimeter facilities developed by the National Astronomical Observatory of Japan, coupled with a network of laser communication stations operated by the National Institute of Information and Communication Technology.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
In-situ real-time observation of photo-induced nanoscale azo-polymer motions using high-speed atomic force microscopy combined with an inverted optical microscope
Authors:
Keishi Yang,
Feng-Yueh Chan,
Hiroki Watanabe,
Shingo Yoshioka,
Yasushi Inouye,
Takayuki Uchihashi,
Hidekazu Ishitobi,
Prabhat Verma,
Takayuki Umakoshi
Abstract:
High-speed atomic force microscopy (HS-AFM) is an indispensable technique in the biological field owing to its excellent imaging capability for the real-time observation of biomolecules with high spatial resolution. Furthermore, recent developments have established a tip-scan stand-alone HS-AFM that can be combined with an optical microscope, drastically improving its versatility for studying vari…
▽ More
High-speed atomic force microscopy (HS-AFM) is an indispensable technique in the biological field owing to its excellent imaging capability for the real-time observation of biomolecules with high spatial resolution. Furthermore, recent developments have established a tip-scan stand-alone HS-AFM that can be combined with an optical microscope, drastically improving its versatility for studying various complex phenomena. Although HS-AFM has mainly been used in biology, it has considerable potential to contribute to various research fields. One of the great candidates is a photoactive material, such as an azo-polymer, which plays a vital role in multiple optical applications because of its unique nanoscale motion under light irradiation. In this study, we demonstrate the in-situ real-time observation of nanoscale azo-polymer motion by combining tip-scan HS-AFM with an optical system, allowing HS-AFM observations precisely aligned with a tightly focused laser position. We successfully observed the dynamic evolution of unique morphologies in azo-polymer films, attributed to photoinduced nano-movements. Moreover, real-time topographic line profile analyses facilitated precise and quantitative investigations of morphological changes, which provided novel insights into the deformation mechanism. This significant demonstration would pave the way for the application of HS-AFM in wide research fields, from biology to material science and physical chemistry.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
Mechanically exfoliated low-layered [Ca$_2$CoO$_3$]$_{0.62}$[CoO$_2$]: A single-crystalline p-type transparent conducting oxide
Authors:
Reiji Okada,
Hiroto Isomura,
Yoshiki J. Sato,
Ryuji Okazaki,
Masayuki Inoue,
Shinya Yoshioka
Abstract:
Transparent conducting oxides (TCOs) are essential components of optoelectronic devices and various materials have been explored for highly efficient TCOs having a combination of high transmittance and low sheet resistance. Here, we focus on a misfit thermoelectric oxide [Ca$_2$CoO$_3$]$_{0.62}$[CoO$_2$] and fabricate the transparent low-layered crystals by a mechanical tape-peeling method using t…
▽ More
Transparent conducting oxides (TCOs) are essential components of optoelectronic devices and various materials have been explored for highly efficient TCOs having a combination of high transmittance and low sheet resistance. Here, we focus on a misfit thermoelectric oxide [Ca$_2$CoO$_3$]$_{0.62}$[CoO$_2$] and fabricate the transparent low-layered crystals by a mechanical tape-peeling method using the single-crystalline samples. From the transmittance measurement, we find that the thickness of low-layered samples is several orders of hundred nanometers, which is comparable with the estimation from the scanning electron microscopy images. Compared to the previous results on the polycrystalline and $c$-axis oriented transparent films, the electrical resistivity is reduced owing to the single-crystalline nature. The figure of merit for the transparent conducting materials in the present low-layered samples is then evaluated to be higher than the values in the previous reports. The present results on the low-layered single-crystalline [Ca$_2$CoO$_3$]$_{0.62}$[CoO$_2$] may offer a unique class of multi-functional transparent thermoelectric oxides.
△ Less
Submitted 6 August, 2023;
originally announced August 2023.
-
Large-scale outflow structure and radiation properties of super-Eddington flow: Dependence on the accretion rates
Authors:
Shogo Yoshioka,
Shin Mineshige,
Ken Ohsuga,
Tomohisa Kawashima,
Takaaki Kitaki
Abstract:
In order to precisely evaluate the impacts by super-Eddington accretors to their environments, it is essential to assure a large enough simulation box and long computational time to avoid any artefacts from numerical settings as much as possible. In this paper, we carry out axisymmetric two-dimensional radiation hydrodynamic simulations around a $10~M_\odot$ black hole in large simulation boxes an…
▽ More
In order to precisely evaluate the impacts by super-Eddington accretors to their environments, it is essential to assure a large enough simulation box and long computational time to avoid any artefacts from numerical settings as much as possible. In this paper, we carry out axisymmetric two-dimensional radiation hydrodynamic simulations around a $10~M_\odot$ black hole in large simulation boxes and study the large-scale outflow structure and radiation properties of super-Eddington accretion flow for a variety of black hole accretion rates, ${\dot M}_{\rm BH} = (110 - 380) ~L_{\rm Edd}/c^2$. The Keplerian radius of the inflow material, at which centrifugal force balances with gravitational force, is fixed to 2430 Schwarzschild radii.We find that the mechanical luminosity grows more rapidly than the radiation luminosity with an increase of ${\dot M}_{\rm BH}$. When seen from a nearly face-on direction, especially, the isotropic mechanical luminosity grows in proportion to ${\dot M}_{\rm BH}^{2.7}$, while the total mechanical luminosity is proportional to ${\dot M}_{\rm BH}^{1.7}$. The reason for the former is that the higher ${\dot M}_{\rm BH}$ is, the more vertically inflated becomes the disk surface, which makes radiation fields more confined in the region around the rotation axis, thereby strongly accelerating outflowing gas. The outflow is classified into pure outflow and failed outflow, depending whether outflowing gas can reach the outer boundary of the simulation box or not. The fraction of the failed outflow decreases with a decrease of ${\dot M}_{\rm BH}$. We analyze physical quantities along each outflow trajectory, finding that the Bernoulli parameter ($Be$) is not a good indicator to discriminate pure and failed outflows, since it is never constant because of continuous acceleration by radiation-pressure force.Pure outflow can arise, even if $Be < 0$ at the launching point.
△ Less
Submitted 3 September, 2022;
originally announced September 2022.
-
Chemical Enrichment in Damped Lyman Alpha Systems From Hierarchical Galaxy Formation Models
Authors:
Katsuya Okoshi,
Masahiro Nagashima,
Naoteru Gouda,
Satoshi Yoshioka
Abstract:
We investigate chemical enrichment in Damped Lyman alpha (DLA) systems in the hierarchical structure formation scenario using a semi-analytic model of galaxy formation. The model developed by Nagashima, Totani, Gouda and Yoshii takes into account various selection effects on high-redshift galaxies and can show fundamental observational properties of galaxies, such as luminosity functions and num…
▽ More
We investigate chemical enrichment in Damped Lyman alpha (DLA) systems in the hierarchical structure formation scenario using a semi-analytic model of galaxy formation. The model developed by Nagashima, Totani, Gouda and Yoshii takes into account various selection effects on high-redshift galaxies and can show fundamental observational properties of galaxies, such as luminosity functions and number-magnitude/redshift relations. DLA systems offer the possibilities of measuring metal abundance more accurately than faint galaxies. For example, recent measurements of zinc abundance can provide good evidence for understanding the processes of metal pollution and star formation in DLA systems because zinc is virtually unaffected by dust depletion. Here we focus on this advantage for observation in order to explore the metallicity evolution in DLA systems at high redshifts. We can consistently show the metallicity evolution for reasonable models which also reproduce fundamental properties of local galaxy population. This result suggests that the chemical evolution of DLA systems can be consistently reconciled with the observational features of typical galaxies. We also investigate other properties of DLA systems (column density distribution and mass density of cold gas), and find that star formation in massive galaxies should be more active than that in low-mass ones. This is consistent with the results by Nagashima et al. and Cole et al. in which the star formation timescale is set by reproducing cold gas mass fraction in local spiral galaxies. Finally we discuss host galaxies associated with DLA systems. We conclude that they primarily consist of sub-L* and/or dwarf galaxies from the observations.
△ Less
Submitted 25 November, 2003;
originally announced November 2003.
