-
Validating the Local Volume Mapper acquisition and guiding hardware
Authors:
Maximilian Häberle,
Thomas M. Herbst,
Peter Bizenberger,
Guillermo Blanc,
Florian Briegel,
Niv Drory,
Wolfgang Gässler,
Nick Konidaris,
Kathryn Kreckel,
Markus Kuhlberg,
Lars Mohr,
Eric Pellegrini,
Solange Ramirez,
Christopher Ritz,
Ralf-Rainer Rohloff,
Paula Stępień
Abstract:
The Local Volume Mapper (LVM) project is one of three surveys that form the Sloan Digital Sky Survey V. It will map the interstellar gas emission in a large fraction of the southern sky using wide-field integral field spectroscopy. Four 16-cm telescopes in siderostat configuration feed the integral field units (IFUs). A reliable acquisition and guiding (A&G) strategy will help ensure that we meet…
▽ More
The Local Volume Mapper (LVM) project is one of three surveys that form the Sloan Digital Sky Survey V. It will map the interstellar gas emission in a large fraction of the southern sky using wide-field integral field spectroscopy. Four 16-cm telescopes in siderostat configuration feed the integral field units (IFUs). A reliable acquisition and guiding (A&G) strategy will help ensure that we meet our science goals. Each of the telescopes hosts commercial CMOS cameras used for A&G. In this work, we present our validation of the camera performance. Our tests show that the cameras have a readout noise of around 5.6e- and a dark current of 21e-/s, when operated at the ideal gain setting and at an ambient temperature of 20°C. To ensure their performance at a high-altitude observing site, such as the Las Campanas Observatory, we studied the thermal behaviour of the cameras at different ambient pressures and with different passive cooling solutions. Using the measured properties, we calculated the brightness limit for guiding exposures. With a 5 s exposure time, we reach a depth of around 16.5 Gaia gmag with a signal-to-noise ratio (SNR)>5. Using Gaia Early Data Release 3, we verified that there are sufficient guide stars for each of the around 25000 survey pointings. For accurate acquisition, we also need to know the focal plane geometry. We present an approach that combines on-chip astrometry and using a point source microscope to measure the relative positions of the IFU lenslets and the individual CMOS pixels to around 2 $μ$m accuracy.
△ Less
Submitted 9 August, 2022; v1 submitted 11 July, 2022;
originally announced July 2022.
-
Infrared wavefront sensing for adaptive optics assisted Galactic Center observations with the VLT interferometer and GRAVITY: operation and results
Authors:
Stefan Hippler,
Wolfgang Brandner,
Silvia Scheithauer,
Martin Kulas,
Johana Panduro,
Peter Bizenberger,
Henry Bonnet,
Casey Deen,
Françoise Delplancke-Ströbele,
Frank Eisenhauer,
Gert Finger,
Zoltan Hubert,
Johann Kolb,
Eric Müller,
Laurent Pallanca,
Julien Woillez,
Gérard Zins,
GRAVITY Collaboration
Abstract:
This article describes the operation of the near-infrared wavefront sensing based Adaptive Optics (AO) system CIAO. The Coudé Infrared Adaptive Optics (CIAO) system is a central auxiliary component of the Very Large Telescope (VLT) interferometer (VLTI). It enables in particular the observations of the Galactic Center (GC) using the GRAVITY instrument. GRAVITY is a highly specialized beam combiner…
▽ More
This article describes the operation of the near-infrared wavefront sensing based Adaptive Optics (AO) system CIAO. The Coudé Infrared Adaptive Optics (CIAO) system is a central auxiliary component of the Very Large Telescope (VLT) interferometer (VLTI). It enables in particular the observations of the Galactic Center (GC) using the GRAVITY instrument. GRAVITY is a highly specialized beam combiner, a device that coherently combines the light of the four 8-m telescopes and finally records interferometric measurements in the K-band on 6 baselines simultaneously. CIAO compensates for phase disturbances caused by atmospheric turbulence, which all four 8 m Unit Telescopes (UT) experience during observation. Each of the four CIAO units generates an almost diffraction-limited image quality at its UT, which ensures that maximum flux of the observed stellar object enters the fibers of the GRAVITY beam combiner. We present CIAO performance data obtained in the first 3 years of operation as a function of weather conditions. We describe how CIAO is configured and used for observations with GRAVITY. In addition, we focus on the outstanding features of the near-infrared sensitive Saphira detector, which is used for the first time on Paranal, and show how it works as a wavefront sensor detector.
△ Less
Submitted 15 July, 2020; v1 submitted 15 June, 2020;
originally announced June 2020.
-
Development of the Warm Astrometric Mask for MICADO astrometry calibration
Authors:
Gabriele Rodeghiero,
Miriam Sawczuck,
Jörg Uwe Pott,
Martin Glück,
Enrico Biancalani,
Maximilian Häberle,
Hannes Reichert,
Claudio Pernechele,
Vianak Naranjo,
Javier Moreno Ventas,
Peter Bizenberger,
Luigi Lessio
Abstract:
The achievement of $μ$arcsec relative astrometry with ground-based, near infrared, extremely large telescopes requires a significant endeavour of calibration strategies. In this paper we address the removal of instrument optical distortions coming from the ELT first light instrument MICADO and its adaptive optics system MAORY by means of an astrometric calibration mask. The results of the test cam…
▽ More
The achievement of $μ$arcsec relative astrometry with ground-based, near infrared, extremely large telescopes requires a significant endeavour of calibration strategies. In this paper we address the removal of instrument optical distortions coming from the ELT first light instrument MICADO and its adaptive optics system MAORY by means of an astrometric calibration mask. The results of the test campaign on a prototype mask (scale 1:2) has probed the manufacturing precision down to $\sim$ 50nm/1mm scale, leading to a relative precision $δσ\sim 5e-5$. The assessed manufacturing precision indicates that an astrometric relative precision of $δσ\sim 5e-5 = \frac{50μas}{1 arcsec}$ is in principle achievable, disclosing $μ$arcsec near infrared astrometry behind an extremely large telescope. The impact of $\sim$ 10-100 nm error residuals on the mask pinholes position is tolerable at a calibration level as confirmed by ray tracing simulations of realistic MICADO distortion patterns affected by mid spatial frequencies residuals. We demonstrated that the MICADO astrometric precision of 50 $μ$as is achievable also in presence of a mid spatial frequencies pattern and manufacturing errors of the WAM by fitting the distorted WAM pattern seen through the instrument with a 10$^{th}$ order Legendre polynomial.
△ Less
Submitted 2 February, 2019;
originally announced February 2019.
-
Alignment and preliminary outcomes of an ELT-size instrument to a very large telescope: LINC-NIRVANA at LBT
Authors:
M. Bergomi,
L. Marafatto,
V. Viotto,
C. Arcidiacono,
J. Farinato,
K. K. R. Santhakumari,
R. McGurk,
M. Dima,
H. Baumeister,
T. Bertram,
J. Berwein,
P. Bizenberger,
F. Briegel,
F. Kittman,
A. Conrad,
R. Ragazzoni,
T. M. Herbst
Abstract:
LINC-NIRVANA (LN) is a high resolution, near infrared imager that uses a multiple field-of-view, layer-oriented, multi-conjugate AO system, consisting of four multi-pyramid wavefront sensors (two for each arm of the Large Binocular Telescope, each conjugated to a different altitude). The system employs up to 40 star probes, looking at up to 20 natural guide stars simultaneously. Its final goal is…
▽ More
LINC-NIRVANA (LN) is a high resolution, near infrared imager that uses a multiple field-of-view, layer-oriented, multi-conjugate AO system, consisting of four multi-pyramid wavefront sensors (two for each arm of the Large Binocular Telescope, each conjugated to a different altitude). The system employs up to 40 star probes, looking at up to 20 natural guide stars simultaneously. Its final goal is to perform Fizeau interferometric imaging, thereby achieving ELT-like spatial resolution (22.8 m baseline resolution). For this reason, LN is also equipped with a fringe tracker, a beam combiner and a NIR science camera, for a total of more than 250 optical components and an overall size of approximately 6x4x4.5 meters. This paper describes the tradeoffs evaluated in order to achieve the alignment of the system to the telescope. We note that LN is comparable in size to planned ELT instrumentation. The impact of such alignment strategies will be compared and the selected procedure, where the LBT telescope is, in fact, aligned to the instrument, will be described. Furthermore, results coming from early night-time commissioning of the system will be presented.
△ Less
Submitted 1 August, 2018;
originally announced August 2018.
-
The MICADO first light imager for the ELT: overview, operation, simulation
Authors:
Richard Davies,
João Alves,
Yann Clénet,
Florian Lang-Bardl,
Harald Nicklas,
Jörg-Uwe Pott,
Roberto Ragazzoni,
Eline Tolstoy,
Paola Amico,
Heiko Anwand-Heerwart,
Santiago Barboza,
Lothar Barl,
Pierre Baudoz,
Ralf Bender,
Naidu Bezawada,
Peter Bizenberger,
Wilfried Boland,
Piercarlo Bonifacio,
Bruno Borgo,
Tristan Buey,
Frédéric Chapron,
Fanny Chemla,
Mathieu Cohen,
Oliver Czoske,
Vincent Deo
, et al. (76 additional authors not shown)
Abstract:
MICADO will enable the ELT to perform diffraction limited near-infrared observations at first light. The instrument's capabilities focus on imaging (including astrometric and high contrast) as well as single object spectroscopy. This contribution looks at how requirements from the observing modes have driven the instrument design and functionality. Using examples from specific science cases, and m…
▽ More
MICADO will enable the ELT to perform diffraction limited near-infrared observations at first light. The instrument's capabilities focus on imaging (including astrometric and high contrast) as well as single object spectroscopy. This contribution looks at how requirements from the observing modes have driven the instrument design and functionality. Using examples from specific science cases, and making use of the data simulation tool, an outline is presented of what we can expect the instrument to achieve.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
MICADO: first light imager for the E-ELT
Authors:
R. Davies,
J. Schubert,
M. Hartl,
J. Alves,
Y. Clénet,
F. Lang-Bardl,
H. Nicklas,
J. -U. Pott,
R. Ragazzoni,
E. Tolstoy,
T. Agocs,
H. Anwand-Heerwart,
S. Barboza,
P. Baudoz,
R. Bender,
P. Bizenberger,
A. Boccaletti,
W. Boland,
P. Bonifacio,
F. Briegel,
T. Buey,
F. Chapron,
M. Cohen,
O. Czoske,
S. Dreizler
, et al. (59 additional authors not shown)
Abstract:
MICADO will equip the E-ELT with a first light capability for diffraction limited imaging at near-infrared wavelengths. The instrument's observing modes focus on various flavours of imaging, including astrometric, high contrast, and time resolved. There is also a single object spectroscopic mode optimised for wavelength coverage at moderately high resolution. This contribution provides an overview…
▽ More
MICADO will equip the E-ELT with a first light capability for diffraction limited imaging at near-infrared wavelengths. The instrument's observing modes focus on various flavours of imaging, including astrometric, high contrast, and time resolved. There is also a single object spectroscopic mode optimised for wavelength coverage at moderately high resolution. This contribution provides an overview of the key functionality of the instrument, outlining the scientific rationale for its observing modes. The interface between MICADO and the adaptive optics system MAORY that feeds it is summarised. The design of the instrument is discussed, focussing on the optics and mechanisms inside the cryostat, together with a brief overview of the other key sub-systems.
△ Less
Submitted 7 July, 2016;
originally announced July 2016.
-
Laboratory Results and Status Update for Pathfinder at LBT, The LINC-NIRVANA NGS Ground- Layer AO Subsystem
Authors:
Derek Kopon,
Al Conrad,
Thomas Bertram,
Tom Herbst,
Martin Kürster,
Jürgen Berwein,
Roberto Ragazzoni,
Jacopo Farinato,
Valentina Viotto,
Maria Bergomi,
Ralf-Rainer Rohloff,
Harald Baumeister,
Fulvio De Bonis,
Ralph Hofferbert,
Alessandro Brunelli,
Carmelo Arcidiacono,
Jorg-Uwe Pott,
Peter Bizenberger,
Florian Briegel,
Daniel Meschke,
Lars Mohr,
Xianyu Zhang,
Frank Kittmann
Abstract:
The full LINC-NIRVANA instrument will be one of the most complex ground-based astronomical systems ever built. It will consist of multiple subsystems, including two multi-conjugate ground layer AO systems (MCAO) that drive the LBT adaptive secondaries, two mid-high layer AO systems with their own Xynetics 349 actuator DM's , a fringe tracker, a beam combiner, and the NIR science camera. In order t…
▽ More
The full LINC-NIRVANA instrument will be one of the most complex ground-based astronomical systems ever built. It will consist of multiple subsystems, including two multi-conjugate ground layer AO systems (MCAO) that drive the LBT adaptive secondaries, two mid-high layer AO systems with their own Xynetics 349 actuator DM's , a fringe tracker, a beam combiner, and the NIR science camera. In order to mitigate risk, we take a modular approach to instrument testing and commissioning by decoupling these subsystems individually. The first subsystem tested on-sky will be one of the ground-layer AO systems, part of a test-bed known as the Pathfinder. The Pathfinder consists of a 12-star pyramid wavefront sensor (PWFS) that drives one of the LBT's adaptive secondaries, a support structure known as "The Foot," and the infrared test camera (IRTC), which is used for acquisition and alignment. The 12 natural guide stars are acquired by moveable arms called "star enlargers," each of which contains its own optical path. The Pathfinder was shipped from MPIA in Heidelberg, Germany to the LBT mountain lab on Mt. Graham, Arizona in February 2013. The system was unpacked, assembled in the LBT clean room, and internally optically aligned. We present the results of our system tests, including star enlarger alignment and system alignment. We also present our immediate plans for on-sky closed loop tests on the LBT scheduled for late Fall. Because plans for all ELTs call for ground layer correction, the Pathfinder provides valuable preliminary information not only for the full LINC-NIRVANA system, but also for future advanced MCAO systems.
△ Less
Submitted 22 July, 2014;
originally announced July 2014.
-
The ESPRI project: astrometric exoplanet search with PRIMA I. Instrument description and performance of first light observations
Authors:
J. Sahlmann,
T. Henning,
D. Queloz,
A. Quirrenbach,
N. M. Elias II,
R. Launhardt,
F. Pepe,
S. Reffert,
D. Segransan,
J. Setiawan,
R. Abuter,
L. Andolfato,
P. Bizenberger,
H. Baumeister,
B. Chazelas,
F. Delplancke,
F. Derie,
N. Di Lieto,
T. P. Duc,
M. Fleury,
U. Graser,
A. Kaminski,
R. Koehler,
S. Leveque,
C. Maire
, et al. (20 additional authors not shown)
Abstract:
The ESPRI project relies on the astrometric capabilities offered by the PRIMA facility of the Very Large Telescope Interferometer for the discovery and study of planetary systems. Our survey consists of obtaining high-precision astrometry for a large sample of stars over several years and to detect their barycentric motions due to orbiting planets. We present the operation principle, the instrumen…
▽ More
The ESPRI project relies on the astrometric capabilities offered by the PRIMA facility of the Very Large Telescope Interferometer for the discovery and study of planetary systems. Our survey consists of obtaining high-precision astrometry for a large sample of stars over several years and to detect their barycentric motions due to orbiting planets. We present the operation principle, the instrument's implementation, and the results of a first series of test observations. A comprehensive overview of the instrument infrastructure is given and the observation strategy for dual-field relative astrometry is presented. The differential delay lines, a key component of the PRIMA facility which was delivered by the ESPRI consortium, are described and their performance within the facility is discussed. Observations of bright visual binaries are used to test the observation procedures and to establish the instrument's astrometric precision and accuracy. The data reduction strategy for astrometry and the necessary corrections to the raw data are presented. Adaptive optics observations with NACO are used as an independent verification of PRIMA astrometric observations. The PRIMA facility was used to carry out tests of astrometric observations. The astrometric performance in terms of precision is limited by the atmospheric turbulence at a level close to the theoretical expectations and a precision of 30 micro-arcseconds was achieved. In contrast, the astrometric accuracy is insufficient for the goals of the ESPRI project and is currently limited by systematic errors that originate in the part of the interferometer beamtrain which is not monitored by the internal metrology system. Our observations led to the definition of corrective actions required to make the facility ready for carrying out the ESPRI search for extrasolar planets.
△ Less
Submitted 10 December, 2012;
originally announced December 2012.
-
Achieving a wide field near infrared camera for the Calar Alto 3.5m telescope
Authors:
Coryn A. L. Bailer-Jones,
Peter Bizenberger,
Clemens Storz
Abstract:
The ongoing development of large infrared array detectors has enabled wide field, deep surveys to be undertaken. There are, however, a number of challenges in building an infrared instrument which has both excellent optical quality and high sensitivity over a wide field. We discuss these problems in the context of building a wide field imaging camera for the 3.5m telescope at Calar Alto with the…
▽ More
The ongoing development of large infrared array detectors has enabled wide field, deep surveys to be undertaken. There are, however, a number of challenges in building an infrared instrument which has both excellent optical quality and high sensitivity over a wide field. We discuss these problems in the context of building a wide field imaging camera for the 3.5m telescope at Calar Alto with the new 2K*2K HgCdTe HAWAII-2 focal plane array. Our final design is a prime focus camera with a 15' field-of-view, called Omega 2000. To achieve excellent optical quality over the whole field, we have had to dispense with the reimaging optics and cold Lyot stop. We show that creative baffling schemes, including the use of undersized baffles, can compensate for the lost K band sensitivity. A moving baffle will be employed in Omega 2000 to allow full transmission in the non-thermal J and H bands.
△ Less
Submitted 6 March, 2000;
originally announced March 2000.
