-
The accretion burst of the massive young stellar object G323.46 -0.08
Authors:
V. Wolf,
B. Stecklum,
A. Caratti o Garatti,
P. A. Boley,
Ch. Fischer,
T. Harries,
J. Eislöffel,
H. Linz,
A. Ahmadi,
J. Kobus,
X. Haubois,
A. Matter,
P. Cruzalebes
Abstract:
Accretion bursts from low-mass young stellar objects (YSOs) are known for many decades. In recent years, the first accretion bursts of massive YSOs (MYSOs) have been observed. These phases of intense protostellar growth are of particular importance for studying massive star formation. Bursts of MYSOs are accompanied by flares of Class II methanol masers (hereafter masers), caused by an increase in…
▽ More
Accretion bursts from low-mass young stellar objects (YSOs) are known for many decades. In recent years, the first accretion bursts of massive YSOs (MYSOs) have been observed. These phases of intense protostellar growth are of particular importance for studying massive star formation. Bursts of MYSOs are accompanied by flares of Class II methanol masers (hereafter masers), caused by an increase in exciting mid-infrared (MIR) emission. The G323.46$-$0.08 (hereafter G323) event extends the small sample of known MYSO bursts. Maser observations of the MYSO G323 show evidence of a flare, which was presumed to be caused by an accretion burst. This should be verified with IR data. We used time-dependent radiative transfer (TDRT) to characterize the heating and cooling timescales for eruptive MYSOs and to infer the main burst parameters. The G323 accretion burst is confirmed. It reached its peak in late 2013/early 2014 with a Ks-band increase of 2.5mag. TDRT indicates that the duration of the thermal afterglow in the far-infrared (FIR) can exceed the burst duration by years. The latter was proved by SOFIA observations, which indicate a flux increase of $(14.2\pm4.6)$% at $70\, \rm μm$ and $(8.5\pm6.1)$% at $160\, μ$m in 2022 (2 years after the burst end). A one-sided light echo emerged that was propagating into the interstellar medium. The G323 burst is probably the most energetic MYSO burst observed so far. Within $8.4 \rm \, yrs$, an energy of $(0.9\pm_{0.8}^{2.5}) \times 10^{47}\,\rm erg$ was released. The short timescale points to the accretion of a compact body, while the burst energy corresponds to an accumulated mass of at least $(7\pm_{6}^{20})\,M_{Jup}$ and possibly even more if the protostar is bloated. In this case, the accretion event might have triggered protostellar pulsations, which give rise to the observed maser periodicity.
△ Less
Submitted 21 May, 2024; v1 submitted 16 May, 2024;
originally announced May 2024.
-
An impressionist view of V Hydrae. When MATISSE paints Asymmetric Giant Blobs
Authors:
L. Planquart,
C. Paladini,
A. Jorissen,
A. Escorza,
E. Pantin,
J. Drevon,
B. Aringer,
F. Baron,
A. Chiavassa,
P. Cruzalèbes,
W. Danchi,
E. De Beck,
M. A. T. Groenewegen,
S. Höfner,
J. Hron,
T. Khouri,
B. Lopez,
F. Lykou,
M. Montarges,
N. Nardetto,
K. Ohnaka,
H. Olofsson,
G. Rau,
A. Rosales-Guzmán,
J. Sanchez-Bermudez
, et al. (7 additional authors not shown)
Abstract:
Our purpose is to study the effect of binary companions located within the first 10 stellar radii from the primary AGB star. In this work, we target the mass-losing carbon star V Hydrae (V Hya), looking for signatures of its companion in the dust forming region of the atmosphere. The star was observed in the L- and N-bands with the VLTI/MATISSE instrument at low spectral resolution. We reconstruct…
▽ More
Our purpose is to study the effect of binary companions located within the first 10 stellar radii from the primary AGB star. In this work, we target the mass-losing carbon star V Hydrae (V Hya), looking for signatures of its companion in the dust forming region of the atmosphere. The star was observed in the L- and N-bands with the VLTI/MATISSE instrument at low spectral resolution. We reconstructed images of V Hya's photosphere and surroundings using the two bands and compared our interferometric observables with VLTI/MIDI and VISIR archival data. To constrain the dust properties, we used DUSTY to model the spectral energy distribution. The star is dominated by dust emission in the L- and N- bands. The VISIR image confirms the presence of a large-scale dusty circumstellar envelope surrounding V Hya. The MATISSE reconstructed images show asymmetric and elongated structures in both infrared bands. In the L-band, we detected an elongated shape of approximately 15 mas, likely to be of photospheric origin. In the N-band, we found a 20 mas extension North-East from the star, and perpendicular to the L-band elongated axis. The position angle and the size of the N-band extension match the prediction of the companion position at MATISSE epoch. By comparing MATISSE N-band with MIDI data, we deduce that the elongation axis in the N-band has rotated since the previous interferometric measurements 13 years ago, supporting the idea that the particle enhancement is related to the dusty clump moving along with the companion. The MATISSE images unveil the presence of a dust enhancement at the companion position, opening new doors for further analysis on the binary interaction with an AGB component.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Images of Betelgeuse with VLTI/MATISSE across the Great Dimming
Authors:
J. Drevon,
F. Millour,
P. Cruzalèbes,
C. Paladini,
P. Scicluna,
A. Matter,
A. Chiavassa,
M. Montargès,
E. Cannon,
F. Allouche,
K. -H. Hofmann,
S. Lagarde,
B. Lopez,
A. Meilland,
R. Petrov,
S. Robbe-Dubois,
D. Schertl,
G. Zins P. Abraham,
P. Berio,
Th. Henningm J. Hron,
J. W. Isbell,
W. Jaffe,
L. Labadie,
J. Varga,
G. Weigelt
, et al. (9 additional authors not shown)
Abstract:
From Nov. 2019 to May 2020, the red supergiant star Betelgeuse experienced an unprecedented drop of brightness in the visible domain called the great dimming event. Large atmospheric dust clouds and large photospheric convective features are suspected to be responsible for it. To better understand the dimming event, we used mid-infrared long-baseline spectro-interferometric measurements of Betelge…
▽ More
From Nov. 2019 to May 2020, the red supergiant star Betelgeuse experienced an unprecedented drop of brightness in the visible domain called the great dimming event. Large atmospheric dust clouds and large photospheric convective features are suspected to be responsible for it. To better understand the dimming event, we used mid-infrared long-baseline spectro-interferometric measurements of Betelgeuse taken with the VLTI/MATISSE instrument before (Dec. 2018), during (Feb. 2020), and after (Dec. 2020) the GDE. We present data in the 3.98 to 4.15\,$μ$m range to cover SiO spectral features molecules as well as adjacent continuum. We have employed geometrical models, image reconstruction, as well as radiative transfer models to monitor the spatial distribution of SiO over the stellar surface. We find a strongly in-homogeneous spatial distribution of SiO that appears to be looking very different between our observing epochs, indicative of a vigorous activity in the stellar atmosphere. The contrast of our images is small in the pseudo-continuum for all epochs, implying that our MATISSE observations support both cold spot and dust cloud model.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
The dusty circumstellar environment of Betelgeuse during the Great Dimming as seen by VLTI/MATISSE
Authors:
E. Cannon,
M. Montargès,
A. de Koter,
A. Matter,
J. Sanchez-Bermudez,
R. Norris,
C. Paladini,
L. Decin,
H. Sana,
J. O. Sundqvist,
E. Lagadec,
P. Kervella,
A. Chiavassa,
A. K. Dupree,
G. Perrin,
P. Scicluna,
P. Stee,
S. Kraus,
W. Danchi,
B. Lopez,
F. Millour,
J. Drevon,
P. Cruzalèbes,
P. Berio,
S. Robbe-Dubois
, et al. (1 additional authors not shown)
Abstract:
The 'Great Dimming' of the prototypical red supergiant Betelgeuse, which occurred between December 2019 and April 2020, gives us unprecedented insight into the processes occurring on the stellar surface and in the inner wind of this type of star. In particular it may bring further understanding of their dust nucleation and mass loss processes. Here, we present and analyse VLTI/MATISSE observations…
▽ More
The 'Great Dimming' of the prototypical red supergiant Betelgeuse, which occurred between December 2019 and April 2020, gives us unprecedented insight into the processes occurring on the stellar surface and in the inner wind of this type of star. In particular it may bring further understanding of their dust nucleation and mass loss processes. Here, we present and analyse VLTI/MATISSE observations in the N-band (8 - 13 $μ$m) taken near the brightness minimum in order to assess the status of the dusty circumstellar environment. We explore the compatibility of a dust clump obscuring the star with our mid-infrared interferometric observations using continuum 3D radiative transfer modelling, and probe the effect of adding multiple clumps close to the star on the observables. We also test the viability of a large cool spot on the stellar surface without dust present in the ambient medium. Using the visibility data, we derive a uniform disk diameter of 59.02 $\pm$ 0.64 mas in the spectral range 8 to 8.75 $μ$m. We find that both the dust clump and the cool spot models are compatible with the data. Further to this, we note that the extinction and emission of our localised dust clump in the line of sight of the star, directly compensate each other making the clump undetectable in the spectral energy distribution and visibilities. The lack of infrared brightening during the 'Great Dimming' therefore does not exclude extinction due to a dust clump as one of the possible mechanisms. The visibilities can be reproduced by a spherical wind with dust condensing at 13 stellar radii and a dust mass-loss rate of (2.1 - 4.9) $\times$ 10$^{-10}$ $\mathit{M}_{\odot} {\rm yr}^{-1}$, however, in order to reproduce the complexity of the observed closure phases, additional surface features or dust clumps would be needed.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Locating dust and molecules in the inner circumstellar environment of R~Sculptoris with MATISSE
Authors:
Julien Drevon,
Florentin Millour,
Pierre Cruzalèbes,
Claudia Paladini,
Josef Hron,
A. Meilland,
F. Allouche,
K. -H. Hofmann,
S. Lagarde,
B. Lopez,
A. Matter,
R. Petrov,
S. Robbe-Dubois,
D. Schertl,
M. Wittkowski,
G. Zins,
P. Ábrahám,
P. Antonelli,
U. Beckmann,
P. Berio,
F. Bettonvil,
A. Glindemann,
U. Graser,
M. Heininger,
Thomas Henning
, et al. (27 additional authors not shown)
Abstract:
AGB stars are one of the main sources of dust production in the Galaxy. However, it is not clear what this process looks like and where the dust is condensing in the circumstellar environment. By characterizing the location of the dust and the molecules in the close environment of an AGB star, we aim to achieve a better understanding the history of the dust formation process. We observed the carbo…
▽ More
AGB stars are one of the main sources of dust production in the Galaxy. However, it is not clear what this process looks like and where the dust is condensing in the circumstellar environment. By characterizing the location of the dust and the molecules in the close environment of an AGB star, we aim to achieve a better understanding the history of the dust formation process. We observed the carbon star R Scl with the VLTI-MATISSE instrument in L- and N-bands. The high angular resolution of the VLTI observations, combined with a large uv-plane coverage allowed us to use image reconstruction methods. To constrain the dust and molecules' location, we used two different methods: MIRA image reconstruction and the 1D code RHAPSODY. We found evidence of C2H2 and HCN molecules between 1 and 3.4 Rstar which is much closer to the star than the location of the dust (between 3.8 and 17.0 Rstar). We also estimated a mass-loss rate of 1.2+-0.4x10-6 Msun per yr. In the meantime, we confirmed the previously published characteristics of a thin dust shell, composed of amorphous carbon (amC) and silicon carbide (SiC). However, no clear SiC feature has been detected in the MATISSE visibilities. This might be caused by molecular absorption that can affect the shape of the SiC band at 11.3 micron. The appearance of the molecular shells is in good agreement with predictions from dynamical atmosphere models. For the first time, we co-located dust and molecules in the environment of an AGB star. We confirm that the molecules are located closer to the star than the dust. The MIRA images unveil the presence of a clumpy environment in the fuzzy emission region beyond 4.0 Rstar. Furthermore, with the available dynamic range and angular resolution, we did not detect the presence of a binary companion. Additional observations combining MATISSE and SAM-VISIR instrument should enable this detection in future studies.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
The disk of FU Orionis viewed with MATISSE/VLTI: first interferometric observations in $L$ and $M$ bands
Authors:
F. Lykou,
P. Ábrahám,
L. Chen,
J. Varga,
Á. Kóspál,
A. Matter,
M. Siwak,
Zs. M. Szabó,
Z. Zhu,
H. B. Liu,
B. Lopez,
F. Allouche,
J. -C. Augereau,
P. Berio,
P. Cruzalèbes,
C. Dominik,
Th. Henning,
K. -H. Hofmann,
M. Hogerheijde,
W. J. Jaffe,
E. Kokoulina,
S. Lagarde,
A. Meilland,
F. Millour,
E. Pantin
, et al. (8 additional authors not shown)
Abstract:
The disk of FU Orionis is marginally resolved with MATISSE, suggesting that the region emitting in the thermal infrared is rather compact. An upper limit of $\sim1.3\pm0.1$ mas (in $L$) can be given for the diameter of the disk region probed in the $L$ band, corresponding to 0.5 au at the adopted Gaia EDR3 distance. This represents the hot, gaseous region of the accretion disk. The $N$-band data i…
▽ More
The disk of FU Orionis is marginally resolved with MATISSE, suggesting that the region emitting in the thermal infrared is rather compact. An upper limit of $\sim1.3\pm0.1$ mas (in $L$) can be given for the diameter of the disk region probed in the $L$ band, corresponding to 0.5 au at the adopted Gaia EDR3 distance. This represents the hot, gaseous region of the accretion disk. The $N$-band data indicate that the dusty passive disk is silicate-rich. Only the innermost region of said dusty disk is found to emit strongly in the $N$ band, and it is resolved at an angular size of $\sim5$ mas, which translates to a diameter of about 2 au. The observations therefore place stringent constraints for the outer radius of the inner accretion disk. Dust radiative transfer simulations with RADMC-3D provide adequate fits to the spectral energy distribution from the optical to the submillimeter and to the interferometric observables when opting for an accretion rate $\dot{M}\sim 2\times 10^{-5}\, M_\odot$ yr$^{-1}$ and assuming $M_*=0.6\, M_\odot$. Most importantly, the hot inner accretion disk's outer radius can be fixed at 0.3 au. The outer radius of the dusty disk is placed at 100 au, based on constraints from scattered-light images in the literature. The dust mass contained in the disk is $2.4\times10^{-4}\, M_\odot$, and for a typical gas-to-dust ratio of 100, the total mass in the disk is approximately 0.02 $M_\odot$. We did not find any evidence for a nearby companion in the current interferometric data, and we tentatively explored the case of disk misalignment. For the latter, our modeling results suggest that the disk orientation is similar to that found in previous imaging studies by ALMA. Should there be an asymmetry in the very compact, inner accretion disk, this might be resolved at even smaller spatial scales ($\leq1$ mas).
△ Less
Submitted 20 May, 2022;
originally announced May 2022.
-
The dusty heart of Circinus: I. Imaging the circumnuclear dust in N-band
Authors:
Jacob W. Isbell,
Klaus Meisenheimer,
Jörg-Uwe Pott,
Marko Stalevski,
Konrad R. W. Tristram,
Joel Sanchez-Bermudez,
Karl-Heinz Hofmann,
Violeta Gámez Rosas,
Walter Jaffe,
Leonard Burtscher,
James Leftley,
Romain Petrov,
Bruno Lopez,
Thomas Henning,
Gerd Weigelt,
Fatme Allouche,
Philippe Berio,
Felix Bettonvil,
Pierre Cruzalebes,
Carsten Dominik,
Matthias Heininger,
Michiel Hogerheijde,
Stéphane Lagarde,
Michael Lehmitz,
Alexis Matter
, et al. (6 additional authors not shown)
Abstract:
Active galactic nuclei play a key role in the evolution of galaxies, but their inner workings and physical connection to the host are poorly understood due to a lack of angular resolution. Infrared interferometry makes it possible to resolve the circumnuclear dust in the nearby Seyfert 2 galaxy, Circinus. Previous observations have revealed complex structures and polar dust emission but interpreta…
▽ More
Active galactic nuclei play a key role in the evolution of galaxies, but their inner workings and physical connection to the host are poorly understood due to a lack of angular resolution. Infrared interferometry makes it possible to resolve the circumnuclear dust in the nearby Seyfert 2 galaxy, Circinus. Previous observations have revealed complex structures and polar dust emission but interpretation was limited to simple models. MATISSE makes it possible to image these structures for the first time. We observed the Circinus Galaxy with VLTI/MATISSE, producing 150 correlated flux spectra and 100 closure phase spectra. We reconstructed images in the N-band at ~10 mas resolution. We fit blackbody functions with dust extinction to several aperture-extracted fluxes from the images to produce a temperature distribution of central dusty structures. We find significant substructure in the circumnuclear dust: central unresolved flux of ~0.5 Jy, a thin disk 1.9 pc in diameter oriented along ~45 deg,and a ~4x1.5 pc polar emission extending orthogonal to the disk. The polar emission exhibits patchiness, which we attribute to clumpy dust. Flux enhancements to the east and west of the disk are seen for the first time. We distinguish the temperature profiles of the disk and of the polar emission: the disk shows a steep temperature gradient indicative of denser material; the polar profile is flatter, indicating clumpiness and/or lower dust density. The unresolved flux is fitted with a high temperature, ~370 K. The polar dust remains warm (~200 K) out to 1.5 pc from the disk. The recovered morphology and temperature distribution resembles modeling of accretion disks with radiation-driven winds at large scales, but we placed new constraints on the subparsec dust. The subparsec features imaged here place new constraints on the physical modeling of circumnuclear dust in active galaxies.
△ Less
Submitted 3 May, 2022;
originally announced May 2022.
-
Application limit of the photocentre displacement to fundamental stellar parameters of fast rotators -- Illustration on the edge-on fast rotator Regulus
Authors:
M. Hadjara,
R. G. Petrov,
S. Jankov,
P. Cruzalèbes,
A. Boskri,
A. Spang,
S. Lagarde,
J. He,
X. Chen,
C. Nitschelm,
E. S. G. de Almeida,
G. Pereira,
E. A. Michael,
Q. Gao,
W. Wang,
I. Reyes,
C. Arcos,
I. Araya,
M. Curé
Abstract:
Differential Interferometry allows to obtain the differential visibility and phase, in addition to the spectrum. The differential phase contains important information about the structure and motion of stellar photosphere such as stellar spots and non-radial pulsations, and particularly the rotation. Thus, this interferometric observable strongly helps to constrain the stellar fundamental parameter…
▽ More
Differential Interferometry allows to obtain the differential visibility and phase, in addition to the spectrum. The differential phase contains important information about the structure and motion of stellar photosphere such as stellar spots and non-radial pulsations, and particularly the rotation. Thus, this interferometric observable strongly helps to constrain the stellar fundamental parameters of fast rotators. The spectro-astrometry mainly uses the photocentre displacements, which is a first approximation of the differential phase, and is applicable only for unresolved or marginally objects. We study here the sensitivity of relevant stellar parameters to the simulated photocentres using the SCIROCCO code: a semi-analytical algorithm dedicated to fast rotators, applied to two theoretical modeling stars based on Achernar and Regulus, in order to classify the importance of these parameters and their impact on the modeling. We compare our simulations with published VLTI/AMBER data. This current work sets the limits of application of photocentre displacements to fast rotators, and under which conditions we can use the photocentres and/or the differential phase, through a pre-established physical criterion. To validate our theoretical study, we apply our method of analysis on observed data of the edge-on fast rotator Regulus. For unresolved targets, with a visibility $V\sim 1$, the photocentre can constrain the main stellar fundamental parameters of fast rotators, whereas from marginally resolved objects ($0.8 \leq V < 1$), mainly the rotation axis position angle ($\rm PA_{\rm rot}$) can be directly deduced from the vectorial photocentre displacement, which is very important for young cluster studies.
△ Less
Submitted 19 March, 2022;
originally announced March 2022.
-
Improving the diameters of interferometric calibrators with MATISSE
Authors:
S. Robbe-Dubois,
P. Cruzalèbes,
Ph. Berio,
A. Meilland,
R. -G. Petrov,
F. Allouche,
D. Salabert,
C. Paladini,
A. Matter,
F. Millour,
S. Lagarde,
B. Lopez,
L. Burtscher,
W. Jaffe,
J. Hron,
I. Percheron,
R. van Boekel,
G. Weigelt,
Ph. Stee
Abstract:
A good knowledge of the angular diameters of stars used to calibrate the observables in stellar interferometry is fundamental. As the available precision for giant stars is worse than the required per cent level, we aim to improve the knowledge of many diameters using MATISSE (Multiple AperTure mid-Infrared SpectroScopic Experiment) data in its different instrumental configurations. Using the squa…
▽ More
A good knowledge of the angular diameters of stars used to calibrate the observables in stellar interferometry is fundamental. As the available precision for giant stars is worse than the required per cent level, we aim to improve the knowledge of many diameters using MATISSE (Multiple AperTure mid-Infrared SpectroScopic Experiment) data in its different instrumental configurations. Using the squared visibility MATISSE observable, we compute the angular diameter value, which ensures the best-fitting curves, assuming an intensity distribution of a uniform disc. We take into account that the transfer function varies over the wavelength and is different from one instrumental configuration to another. The uncertainties on the diameters are estimated using the residual bootstrap method. Using the low spectral resolution mode in the L band, we observed a set of 35 potential calibrators selected in the Mid-infrared stellar Diameter and Flux Compilation Catalogue with diameters ranging from about 1 to 3 mas. We reach a precision on the diameter estimates in the range 0.6 per cent to 4.1 per cent. The study of the stability of the transfer function in visibility over two nights makes us confident in our results. In addition, we identify one star, 75 Vir initially present in the calibrator lists, for which our method does not converge, and prove to be a binary star. This leads us to the conclusion that our method is actually necessary to improve the quality of the astrophysical results obtained with MATISSE, and that it can be used as a useful tool for 'bad calibrator' detection.
△ Less
Submitted 3 January, 2022;
originally announced January 2022.
-
Thermal imaging of dust hiding the black hole in the Active Galaxy NGC 1068
Authors:
Violeta Gamez Rosas,
Jacob W. Isbell,
Walter Jaffe,
Romain G. Petrov,
James H. Leftley,
Karl-Heinz Hofmann,
Florentin Millour,
Leonard Burtscher,
Klaus Meisenheimer,
Anthony Meilland,
Laurens B. F. M. Waters,
Bruno Lopez,
Stephane Lagarde,
Gerd Weigelt,
Philippe Berio,
Fatme Allouche,
Sylvie Robbe-Dubois,
Pierre Cruzalebes,
Felix Bettonvil,
Thomas Henning,
Jean-Charles Augereau,
Pierre Antonelli,
Udo Beckmann,
Roy van Boekel,
Philippe Bendjoya
, et al. (27 additional authors not shown)
Abstract:
In the widely accepted 'Unified Model' solution of the classification puzzle of Active Galactic Nuclei, the orientation of a dusty accretion torus around the central black hole dominates their appearance. In 'type-1' systems, the bright nucleus is visible at the centre of a face-on torus. In 'type-2' systems the thick, nearly edge-on torus hides the central engine. Later studies suggested evolutio…
▽ More
In the widely accepted 'Unified Model' solution of the classification puzzle of Active Galactic Nuclei, the orientation of a dusty accretion torus around the central black hole dominates their appearance. In 'type-1' systems, the bright nucleus is visible at the centre of a face-on torus. In 'type-2' systems the thick, nearly edge-on torus hides the central engine. Later studies suggested evolutionary effects and added dusty clumps and polar winds but left the basic picture intact. However, recent high-resolution images of the archetypal type-2 galaxy NGC 1068 suggested a more radical revision. They displayed a ring-like emission feature which the authors advocated to be hot dust surrounding the black hole at the radius where the radiation from the central engine evaporates the dust. That ring is too thin and too far tilted from edge-on to hide the central engine, and ad hoc foreground extinction is needed to explain the type-2 classification. These images quickly generated reinterpretations of the type 1-2 dichotomy. Here we present new multi-band mid-infrared images of NGC1068 that detail the dust temperature distribution and reaffirm the original model. Combined with radio data, our maps locate the central engine below the previously reported ring and obscured by a thick, nearly edge-on disk, as predicted by the Unified Model. We also identify emission from polar flows and absorbing dust that is mineralogically distinct from that towards the Milky Way centre.
△ Less
Submitted 27 December, 2021;
originally announced December 2021.
-
The extended atmosphere and circumstellar environment of the cool evolved star VX Sagittarii as seen by MATISSE
Authors:
A. Chiavassa,
K. Kravchenko,
M. Montargès,
F. Millour,
A. Matter,
B. Freytag,
M. Wittkowski,
V. Hocdé,
P. Cruzalèbes,
F. Allouche,
B. Lopez,
S. Lagarde,
R. G. Petrov,
A. Meilland,
S. Robbe-Dubois,
K. -H. Hofmann,
G. Weigelt,
P. Berio,
P. Bendjoya,
F. Bettonvil,
A. Domiciano de Souza,
M. Heininger,
Th. Henning,
J. W. Isbell,
W. Jaffe
, et al. (28 additional authors not shown)
Abstract:
Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification. Aims. We aim to spatially resolve the photospheric extent as well as the circumstellar environment. Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3 to 4 μm), M (4.5 to 5 μm), and N (8 to 13 μm) bands. We reco…
▽ More
Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification. Aims. We aim to spatially resolve the photospheric extent as well as the circumstellar environment. Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3 to 4 μm), M (4.5 to 5 μm), and N (8 to 13 μm) bands. We reconstructed monochromatic images using the MIRA software. We used 3D radiation-hydrodynamics (RHD) simulations carried out with CO5BOLD and a uniform disc model to estimate the apparent diameter and interpret the stellar surface structures. Moreover, we employed the radiative transfer codes Optim3D and Radmc3D to compute the spectral energy distribution for the L, M, and N bands, respectively. Results. MATISSE observations unveil, for the first time, the morphology of VX Sgr across the L, M, and N bands. The reconstructed images show a complex morphology with brighter areas whose characteristics depend on the wavelength probed. We measured the angular diameter as a function of the wavelength and showed that the photospheric extent in the L and M bands depends on the opacity through the atmosphere. In addition to this, we also concluded that the observed photospheric inhomogeneities can be interpreted as convection-related surface structures. The comparison in the N band yielded a qualitative agreement between the N band spectrum and simple dust radiative transfer simulations. However, it is not possible to firmly conclude on the interpretation of the current data because of the difficulty in constraing the model parameters using the limited accuracy of our absolute flux calibration. Conclusions. MATISSE observations and the derived reconstructed images unveil the appearance of the stellar surface and circumstellar environment across a very large spectral domain for the first time.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
VLTI-MATISSE L- and N-band aperture-synthesis imaging of the unclassified B[e] star FS Canis Majoris
Authors:
K. -H. Hofmann,
A. Bensberg,
D. Schertl,
G. Weigelt,
S. Wolf,
A. Meilland,
F. Millour,
L. B. F. M. Waters,
S. Kraus,
K. Ohnaka,
B. Lopez,
R. G. Petrov,
S. Lagarde,
Ph. Berio,
F. Allouche,
S. Robbe-Dubois,
W. Jaffe,
Th. Henning,
C. Paladini,
M. Schöller,
A. Mérand,
A. Glindemann,
U. Beckmann,
M. Heininger,
F. Bettonvil
, et al. (36 additional authors not shown)
Abstract:
Context: FS Canis Majoris (FS CMa, HD 45677) is an unclassified B[e] star surrounded by an inclined dust disk. The evolutionary stage of FS CMa is still debated. Perpendicular to the circumstellar disk, a bipolar outflow was detected. Infrared aperture-synthesis imaging provides us with a unique opportunity to study the disk structure. Aims: Our aim is to study the intensity distribution of the di…
▽ More
Context: FS Canis Majoris (FS CMa, HD 45677) is an unclassified B[e] star surrounded by an inclined dust disk. The evolutionary stage of FS CMa is still debated. Perpendicular to the circumstellar disk, a bipolar outflow was detected. Infrared aperture-synthesis imaging provides us with a unique opportunity to study the disk structure. Aims: Our aim is to study the intensity distribution of the disk of FS CMa in the mid-infrared L and N bands. Methods: We performed aperture-synthesis imaging of FS CMa with the MATISSE instrument (Multi AperTure mid-Infrared SpectroScopic Experiment) in the low spectral resolution mode to obtain images in the L and N bands. We computed radiative transfer models that reproduce the L- and N-band intensity distributions of the resolved disks. Results: We present L- and N-band aperture-synthesis images of FS CMa reconstructed in the wavelength bands of 3.4-3.8 and 8.6-9.0 micrometer. In the L-band image, the inner rim region of an inclined circumstellar disk and the central object can be seen with a spatial resolution of 2.7 milliarcsec (mas). An inner disk cavity with an angular diameter of 6x12mas is resolved. The L-band disk consists of a bright northwestern (NW) disk region and a much fainter southeastern (SE) region. The images suggest that we are looking at the bright inner wall of the NW disk rim, which is on the far side of the disk. In the N band, only the bright NW disk region is seen. In addition to deriving the inclination and the inner disk radius, fitting the reconstructed brightness distributions via radiative transfer modeling allows one to constrain the innermost disk structure, in particular the shape of the inner disk rim.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
MATISSE, the VLTI mid-infrared imaging spectro-interferometer
Authors:
B. Lopez,
S. Lagarde,
R. G. Petrov,
W. Jaffe,
P. Antonelli,
F. Allouche,
P. Berio,
A. Matter,
A. Meilland,
F. Millour,
S. Robbe-Dubois,
Th. Henning,
G. Weigelt,
A. Glindemann,
T. Agocs,
Ch. Bailet,
U. Beckmann,
F. Bettonvil,
R. van Boekel,
P. Bourget,
Y. Bresson,
P. Bristow,
P. Cruzalèbes,
E. Eldswijk,
Y. Fanteï Caujolle
, et al. (128 additional authors not shown)
Abstract:
Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have develope…
▽ More
Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have developed MATISSE, the Multi AperTure mid-Infrared SpectroScopic Experiment, to access high resolution imaging in a wide spectral domain and explore topics such: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; accretion processes around super massive black holes in AGN. Methods:The instrument is a spectro-interferometric imager covering three atmospheric bands (L,M,N) from 2.8 to 13.0 mu, combining four optical beams from the VLTI's telscopes. Its concept, related observing procedure, data reduction and calibration approach are the product of 30 years of instrumental research. The instrument utilizes a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results:We provide an overview of the physical principle of the instrument and its functionalities, the characteristics of the delivered signal, a description of the observing modes and of their performance limits. An ensemble of data and reconstructed images are illustrating the first acquired key observations. Conclusion:The instrument has been in operation at Cerro Paranal, ESO, Chile since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now.
△ Less
Submitted 2 March, 2022; v1 submitted 29 October, 2021;
originally announced October 2021.
-
Potential and sky coverage for off-axis fringe tracking in optical long baseline interferometry
Authors:
Abdelkarim Boskri,
Romain G. Petrov,
Thami El Halkouj,
Massinissa Hadjara,
James Leftley,
Zouhair Benkhaldoun,
Pierre Cruzalèbes,
Aziz Ziad,
Marcel Carbillet
Abstract:
The spectacular results provided by the second-generation VLTI instruments GRAVITY and MATISSE on active galactic nuclei (AGN) trigger and justify a strong increase in the sensitivity limit of optical interferometers. A key component of such an upgrade is off-axis fringe tracking. To evaluate its potential and limitations, we describe and analyse its error budget including fringe sensing precision…
▽ More
The spectacular results provided by the second-generation VLTI instruments GRAVITY and MATISSE on active galactic nuclei (AGN) trigger and justify a strong increase in the sensitivity limit of optical interferometers. A key component of such an upgrade is off-axis fringe tracking. To evaluate its potential and limitations, we describe and analyse its error budget including fringe sensing precision and temporal, angular and chromatic perturbations of the piston. The global tracking error is computed using standard seeing parameters for different sites, seeing conditions and telescope sizes for the current GRAVITY Fringe Tracker (GFT) and a new concept of Hierarchical Fringe Tracker. Then, it is combined with a large catalogue of guide star candidates from Gaia to produce sky coverage maps that give the probability to find a usable off-axis guide star in any part of the observable sky. These maps can be used to set the specifications of the system, check its sensitivity to seeing conditions, and evaluate the feasibility of science programs. We check the availability of guide stars and the tracking accuracy for a large set of 15 799 Quasars to confirm the feasibility of a large program on Broad Line Regions in the K band with the GFT and show how it can be extended to the L, M, and N bands. Another set of 331 well-characterized nearby AGNs shows the high potential of MATISSE for imaging and characterization of the dust torus in the N band under off-axis tracking on both Unit Telescopes and Auxiliary Telescopes.
△ Less
Submitted 13 July, 2021; v1 submitted 9 July, 2021;
originally announced July 2021.
-
First MATISSE L-band observations of HD 179218. Is the inner 10 au region rich in carbon dust particles?
Authors:
E. Kokoulina,
A. Matter,
B. Lopez,
E. Pantin,
N. Ysard,
G. Weigelt,
E. Habart,
J. Varga,
A. Jones,
A. Meilland,
E. Dartois,
L. Klarmann,
J. -C. Augereau,
R. van Boekel,
M. Hogerheijde,
G. Yoffe,
L. B. F. M. Waters,
C. Dominik,
W. Jaffe,
F. Millour,
Th. Henning,
K. -H. Hofmann,
D. Schertl,
S. Lagarde,
R. G. Petrov
, et al. (36 additional authors not shown)
Abstract:
Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid carbon content especially in the planet-forming regions ($\sim $0.1 to 10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as…
▽ More
Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid carbon content especially in the planet-forming regions ($\sim $0.1 to 10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as well as polycyclic aromatic hydrocarbons (PAHs)), which generate infrared (IR) features that can be used to trace the solid carbon reservoirs. The new mid-IR instrument MATISSE, installed at the Very Large Telescope Interferometer (VLTI), can spatially resolve the inner regions ($\sim$ 1 to 10 au) of PPDs and locate, down to the au-scale, the emission coming from carbon grains. Our aim is to provide a consistent view on the radial structure, down to the au-scale, as well as basic physical properties and the nature of the material responsible for the IR continuum emission in the inner disk region around HD 179218. We implemented a temperature-gradient model to interpret the disk IR continuum emission, based on a multiwavelength dataset comprising a broadband spectral energy distribution (SED) and VLTI H-, L-, and N-bands interferometric data obtained in low spectral resolution. Then, we added a ring-like component, representing the carbonaceous L-band features-emitting region, to assess its detectability in future higher spectral resolution observations employing mid-IR interferometry.
△ Less
Submitted 29 July, 2021; v1 submitted 24 June, 2021;
originally announced June 2021.
-
Mid-infrared circumstellar emission of the long-period Cepheid l Carinae resolved with VLTI/MATISSE
Authors:
V. Hocdé,
N. Nardetto,
A. Matter,
E. Lagadec,
A. Mérand,
P. Cruzalèbes,
A. Meilland,
F. Millour,
B. Lopez,
P. Berio,
G. Weigelt,
R. Petrov,
J. W. Isbell,
W. Jaffe,
P. Kervella,
A. Glindemann,
M. Schöller,
F. Allouche,
A. Gallenne,
A. Domiciano de Souza,
G. Niccolini,
E. Kokoulina,
J. Varga,
S. Lagarde,
J. -C. Augereau
, et al. (129 additional authors not shown)
Abstract:
The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. W…
▽ More
The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. We first use photometric observations in various bands and Spitzer Space Telescope spectroscopy to constrain the IR excess of $\ell$ Car. Then, we analyze the VLTI/MATISSE measurements at a specific phase of observation, in order to determine the flux contribution, the size and shape of the environment of the star in the L band. We finally test the hypothesis of a shell of ionized gas in order to model the IR excess. We report the first detection in the L band of a centro-symmetric extended emission around l Car, of about 1.7$R_\star$ in FWHM, producing an excess of about 7.0\% in this band. In the N band, there is no clear evidence for dust emission from VLTI/MATISSE correlated flux and Spitzer data. On the other side, the modeled shell of ionized gas implies a more compact CSE ($1.13\pm0.02\,R_\star$) and fainter (IR excess of 1\% in the L band). We provide new evidences for a compact CSE of $\ell$ Car and we demonstrate the capabilities of VLTI/MATISSE for determining common properties of CSEs. While the compact CSE of $\ell$ Car is probably of gaseous nature, the tested model of a shell of ionized gas is not able to simultaneously reproduce the IR excess and the interferometric observations. Further Galactic Cepheids observations with VLTI/MATISSE are necessary for determining the properties of CSEs, which may also depend on both the pulsation period and the evolutionary state of the stars.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
The asymmetric inner disk of the Herbig Ae star HD 163296 in the eyes of VLTI/MATISSE: evidence for a vortex?
Authors:
J. Varga,
M. Hogerheijde,
R. van Boekel,
L. Klarmann,
R. Petrov,
L. B. F. M. Waters,
S. Lagarde,
E. Pantin,
Ph. Berio,
G. Weigelt,
S. Robbe-Dubois,
B. Lopez,
F. Millour,
J. -C. Augereau,
H. Meheut,
A. Meilland,
Th. Henning,
W. Jaffe,
F. Bettonvil,
P. Bristow,
K. -H. Hofmann,
A. Matter,
G. Zins,
S. Wolf,
F. Allouche
, et al. (111 additional authors not shown)
Abstract:
Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. W…
▽ More
Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. We use geometric models to fit the data. Our models include a smoothed ring, a flat disk with inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydro-dynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is $3.5 \pm 0.2$. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the $r<0.3$ au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. For the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large scale vortex may be compatible with our data. The half-light radius of the L-band emitting region is $0.33\pm 0.01$ au, the inclination is ${52^\circ}^{+5^\circ}_{-7^\circ}$, and the position angle is $143^\circ \pm 3^\circ$. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for $μ$m-sized grains. Refractory grains or large ($\gtrsim 10\ μ$m-sized) grains could be the origin for this emission.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
A catalogue of stellar diameters and fluxes for mid-infrared interferometry
Authors:
P. Cruzalèbes,
R. G. Petrov,
S. Robbe-Dubois,
J. Varga,
L. Burtscher,
F. Allouche,
P. Berio,
K. -H. Hofmann,
J. Hron,
W. Jaffe,
S. Lagarde,
B. Lopez,
A. Matter,
A. Meilland,
K. Meisenheimer,
F. Millour,
D. Schertl
Abstract:
We present the Mid-infrared stellar Diameters and Fluxes compilation Catalogue (MDFC) dedicated to long-baseline interferometry at mid-infrared wavelengths (3-13 mum). It gathers data for half a million stars, i.e. nearly all the stars of the Hipparcos-Tycho catalogue whose spectral type is reported in the SIMBAD database. We cross-match 26 databases to provide basic information, binarity elements…
▽ More
We present the Mid-infrared stellar Diameters and Fluxes compilation Catalogue (MDFC) dedicated to long-baseline interferometry at mid-infrared wavelengths (3-13 mum). It gathers data for half a million stars, i.e. nearly all the stars of the Hipparcos-Tycho catalogue whose spectral type is reported in the SIMBAD database. We cross-match 26 databases to provide basic information, binarity elements, angular diameter, magnitude and flux in the near and mid-infrared, as well as flags that allow us to identify the potential calibrators. The catalogue covers the entire sky with 465 857 stars, mainly dwarfs and giants from B to M spectral types closer than 18 kpc. The smallest reported values reach 0.16 muJy in L and 0.1 muJy in N for the flux, and 2 microarcsec for the angular diameter. We build 4 lists of calibrator candidates for the L- and N-bands suitable with the Very Large Telescope Interferometer (VLTI) sub- and main arrays using the MATISSE instrument. We identify 1 621 candidates for L and 44 candidates for N with the Auxiliary Telescopes (ATs), 375 candidates for both bands with the ATs, and 259 candidates for both bands with the Unit Telescopes (UTs). Predominantly cool giants, these sources are small and bright enough to belong to the primary lists of calibrator candidates. In the near future, we plan to measure their angular diameter with 1% accuracy.
△ Less
Submitted 1 October, 2019;
originally announced October 2019.
-
A CO-multilayer outer atmosphere for eight evolved stars revealed with VLTI/AMBER
Authors:
M. Hadjara,
P. Cruzalèbes,
C. Nitschelm,
X. Chen,
E. A. Michael,
E. Moreno
Abstract:
We determine the physical parameters of the outer atmosphere of a sample of eight evolved stars, including the red supergiant α Scorpii, the red giant branch stars α Bootis and γ Crucis, the K giant λ Velorum, the normal M giants BK Virginis and SW Virginis, and the Mira star W Hydrae (in two different luminosity phases) by spatially resolving the stars in the individual carbon monoxide (CO) first…
▽ More
We determine the physical parameters of the outer atmosphere of a sample of eight evolved stars, including the red supergiant α Scorpii, the red giant branch stars α Bootis and γ Crucis, the K giant λ Velorum, the normal M giants BK Virginis and SW Virginis, and the Mira star W Hydrae (in two different luminosity phases) by spatially resolving the stars in the individual carbon monoxide (CO) first overtone lines. We used the Astronomical Multi-BEam combineR (AMBER) instrument at the Very Large Telescope Interferometer (VLTI), in high-resolution mode ($λ/Δλ {\approx} 12000$) between 2.28 and 2.31 $μm$ in the K band.The maximal angular resolution is 10 mas, obtained using a triplet telescope configuration, with baselines from 7 to 48 m. By using a numerical model of a molecular atmosphere in a spherical shells (MOLsphere), called PAMPERO (an acronym for the "Physical Approach of Molecular Photospheric Ejection at high-angular-Resolution for evOlved stars"), we add multiple extended CO layers above the photospheric MARCS model at an adequate spatial resolution. We use the differential visibilities and the spectrum to estimate the size ($R$) of the CO MOLsphere, its column density (${N_{CO}}$) and temperature (${T_{mol}}$) distributions along the stellar radius. The combining of the ${χ^2}$ minimization and a fine grid approach for uncertainty analysis leads to reasonable ${N_{CO}}$ and ${T_{mol}}$ distributions along the stellar radius of the MOLsphere.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
Differential interferometry of the rapid rotator Regulus
Authors:
M. Hadjara,
R. G. Petrov,
S. Jankov,
P. Cruzalèbes,
A. Spang,
S. Lagarde
Abstract:
We analyse interferometric data obtained for Regulus with AMBER (Astronomical Multi- BEam combineR) at high spectral resolution ($λ/δλ\approx 12000$) across the Br$γ$ spectral line. The study of the photocentre displacement allows us to constrain a large number of stellar parameters -- equatorial radius $R_{\rm eq}$, equatorial velocity $V_{\rm eq}$, inclination $i$, rotation-axis position angle…
▽ More
We analyse interferometric data obtained for Regulus with AMBER (Astronomical Multi- BEam combineR) at high spectral resolution ($λ/δλ\approx 12000$) across the Br$γ$ spectral line. The study of the photocentre displacement allows us to constrain a large number of stellar parameters -- equatorial radius $R_{\rm eq}$, equatorial velocity $V_{\rm eq}$, inclination $i$, rotation-axis position angle $PA_{\rm rot}$, and flattening -- with an estimation of gravity-darkening coefficient $β$ using previously published theoretical results. We use the Simulation Code of Interferometric-observations for ROtators and CirCumstellar Objects (SCIROCCO), a semi-analytical algorithm dedicated to fast rotators. We chose Regulus because it is a very well-known edge-on star, for which an alternative approach is needed to check the previously published results. Our analysis showed that a significant degeneracy of solution is present.
By confronting the results obtained by differential interferometry with those obtained by conventional long-base interferometry, we obtain similar results (within the uncertainties), thereby validating our approach, where $V_{eq}$ and $i$ are found separately. From the photocentre displacement, we can independently deduce $PA_{rot}$. We use two minimization methods to restrict observed stellar parameters via a fast rotator model: a non-stochastic method ($χ^2$ fit) and a stochastic one (Markov Chain Monte Carlo method), in order to check whether the correct global minimum is achieved particularly with respect to the degeneracies of the gravity darkening parameter $β$, where we demonstrate, using a quantitative analysis of parameters, that the estimate of $β$ is easier for stars with an inclination angle of around $45^\circ$.
△ Less
Submitted 3 August, 2018;
originally announced August 2018.
-
Regulus observed with VLTI/AMBER
Authors:
S. Jankov,
M. Hadjara,
R. G. Petrov,
P. Cruzalèbes,
A. Spang,
S. Lagarde
Abstract:
The rapidly rotating primary component of Regulus A system has been observed, for the first time, using the technique of differential interferometry at high spectral resolution. The observations have been performed across the Br$_γ$ spectral line with the VLTI/AMBER focal instrument in high spectral resolution mode (R $\approx$ 12000) at $\approx$ 80-130m (projected on the sky) Auxiliary Telescope…
▽ More
The rapidly rotating primary component of Regulus A system has been observed, for the first time, using the technique of differential interferometry at high spectral resolution. The observations have been performed across the Br$_γ$ spectral line with the VLTI/AMBER focal instrument in high spectral resolution mode (R $\approx$ 12000) at $\approx$ 80-130m (projected on the sky) Auxiliary Telescopes triplet baseline configurations. We confirm, within the uncertainties, the results previously obtained using the techniques of classical long-baseline interferometry, although the question of anomalous gravity darkening remains open for the future study.
△ Less
Submitted 10 December, 2017;
originally announced December 2017.
-
Science cases for a visible interferometer
Authors:
Philippe Stee,
France Allard,
Myriam Benisty,
Lionel Bigot,
Nicolas Blind,
Henri Boffin,
Marcelo Borges Fernandes,
Alex Carciofi,
Andrea Chiavassa,
Orlagh Creevey,
Pierre Cruzalebes,
Willem-Jan de Wit,
Armando Domiciano de Souza,
Martin Elvis,
Nicolas Fabas,
Daniel Faes,
Alexandre Gallenne,
Carlos Guerrero Pena,
Michel Hillen,
Sebastian Hoenig,
Michael Ireland,
Pierre Kervella,
Makoto Kishimoto,
Nadia Kostogryz,
Stefan Kraus
, et al. (32 additional authors not shown)
Abstract:
High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome…
▽ More
High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of developing strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges.
This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41.
△ Less
Submitted 21 March, 2017; v1 submitted 7 March, 2017;
originally announced March 2017.
-
MATISSE: specifications and expected performances
Authors:
A. Matter,
S. Lagarde,
R. G. Petrov,
P. Berio,
S. Robbe-Dubois,
B. Lopez,
P. Antonelli,
F. Allouche,
P. Cruzalebes,
F. Millour,
G. Bazin,
L. Bourgès
Abstract:
MATISSE (Multi AperTure mid-Infrared SpectroScopic Experiment) is the next generation spectro-interferometer at the European Southern Observatory VLTI operating in the spectral bands L, M and N, and combining four beams from the unit and auxiliary telescopes. MATISSE is now fully integrated at the Observatoire de la Côte d'Azur in Nice (France), and has entered very recently its testing phase in l…
▽ More
MATISSE (Multi AperTure mid-Infrared SpectroScopic Experiment) is the next generation spectro-interferometer at the European Southern Observatory VLTI operating in the spectral bands L, M and N, and combining four beams from the unit and auxiliary telescopes. MATISSE is now fully integrated at the Observatoire de la Côte d'Azur in Nice (France), and has entered very recently its testing phase in laboratory. This paper summarizes the equations describing the MATISSE signal and the associated sources of noise. The specifications and the expected performances of the instrument are then evaluated taking into account the current characteristics of the instrument and the VLTI infrastructure, including transmission and contrast degradation budgets. In addition, we present the different MATISSE simulation tools that will be made available to the future users.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
An overview of the mid-infrared spectro-interferometer MATISSE: science, concept, and current status
Authors:
A. Matter,
B. Lopez,
P. Antonelli,
M. Lehmitz,
F. Bettonvil,
U. Beckmann,
S. Lagarde,
W. Jaffe,
R. G. Petrov,
P. Berio,
F. Millour,
S. Robbe-Dubois,
A. Glindemann,
P. Bristow,
M. Schoeller,
T. Lanz,
T. Henning,
G. Weigelt,
M. Heininger,
S. Morel,
P. Cruzalebes,
K. Meisenheimer,
R. Hofferbert,
S. Wolf,
Y. Bresson
, et al. (82 additional authors not shown)
Abstract:
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena a…
▽ More
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
Data reduction for the MATISSE instrument
Authors:
Florentin Millour,
P Berio,
M Heininger,
K. -H Hofmann,
D Schertl,
G Weigelt,
F Guitton,
W Jaffe,
U Beckmann,
R Petrov,
F Allouche,
S Robbe-Dubois,
S Lagarde,
A Soulain,
A Meilland,
A Matter,
P Cruzalèbes,
B Lopez
Abstract:
We present in this paper the general formalism and data processing steps used in the MATISSE data reduction software, as it has been developed by the MATISSE consortium. The MATISSE instrument is the mid-infrared new generation interferometric instrument of the Very Large Telescope Interferometer (VLTI). It is a 2-in-1 instrument with 2 cryostats and 2 detectors: one 2k x 2k Rockwell Hawaii 2RG de…
▽ More
We present in this paper the general formalism and data processing steps used in the MATISSE data reduction software, as it has been developed by the MATISSE consortium. The MATISSE instrument is the mid-infrared new generation interferometric instrument of the Very Large Telescope Interferometer (VLTI). It is a 2-in-1 instrument with 2 cryostats and 2 detectors: one 2k x 2k Rockwell Hawaii 2RG detector for L\&M-bands, and one 1k x 1k Raytheon Aquarius detector for N-band, both read at high framerates, up to 30 frames per second. MATISSE is undergoing its first tests in laboratory today.
△ Less
Submitted 15 November, 2018; v1 submitted 8 July, 2016;
originally announced August 2016.
-
Grown-up stars physics with MATISSE
Authors:
Florentin Millour,
J Hron,
A Chiavassa,
G Weigelt,
A Soulain,
Z Khorrami,
A Meilland,
N Nardetto,
C Paladini,
A Domiciano de Souza,
G Niccolini,
K. -H Hofmann,
D Schertl,
P Stee,
P Bendjoya,
F Thévenin,
F Vakili,
P Berio,
T Lanz,
A Matter,
P Cruzalèbes,
R Petrov,
B Lopez
Abstract:
MATISSE represents a great opportunity to image the environment around massive and evolved stars. This will allow one to put constraints on the circumstellar structure, on the mass ejection of dust and its reorganization , and on the dust-nature and formation processes. MATISSE measurements will often be pivotal for the understanding of large multiwavelength datasets on the same targets collected…
▽ More
MATISSE represents a great opportunity to image the environment around massive and evolved stars. This will allow one to put constraints on the circumstellar structure, on the mass ejection of dust and its reorganization , and on the dust-nature and formation processes. MATISSE measurements will often be pivotal for the understanding of large multiwavelength datasets on the same targets collected through many high-angular resolution facilities at ESO like sub-millimeter interferometry (ALMA), near-infrared adaptive optics (NACO, SPHERE), interferometry (PIONIER, GRAVITY), spectroscopy (CRIRES), and mid-infrared imaging (VISIR). Among main sequence and evolved stars, several cases of interest have been identified that we describe in this paper.
△ Less
Submitted 8 July, 2016;
originally announced July 2016.
-
Large-scale environments of binary AGB stars probed by Herschel. II: Two companions interacting with the wind of pi1 Gruis
Authors:
A. Mayer,
A. Jorissen,
C. Paladini,
F. Kerschbaum,
D. Pourbaix,
C. Siopis,
R. Ottensamer,
M. Mečina,
N. L. J. Cox,
M. A. T. Groenewegen,
D. Klotz,
G. Sadowski,
A. Spang,
P. Cruzalèbes,
C. Waelkens
Abstract:
Context. The Mass loss of Evolved StarS (MESS) sample observed with PACS on board the Herschel Space Observatory revealed that several asymptotic giant branch (AGB) stars are surrounded by an asymmetric circumstellar envelope (CSE) whose morphology is most likely caused by the interaction with a stellar companion. The evolution of AGB stars in binary systems plays a crucial role in understanding t…
▽ More
Context. The Mass loss of Evolved StarS (MESS) sample observed with PACS on board the Herschel Space Observatory revealed that several asymptotic giant branch (AGB) stars are surrounded by an asymmetric circumstellar envelope (CSE) whose morphology is most likely caused by the interaction with a stellar companion. The evolution of AGB stars in binary systems plays a crucial role in understanding the formation of asymmetries in planetary nebulæ (PNe), but at present, only a handful of cases are known where the interaction of a companion with the stellar AGB wind is observed.
Aims. We probe the environment of the very evolved AGB star $π^1$ Gruis on large and small scales to identify the triggers of the observed asymmetries.
Methods. Observations made with Herschel/PACS at 70 $μ$m and 160 $μ$m picture the large-scale environment of $π^1$ Gru. The close surroundings of the star are probed by interferometric observations from the VLTI/AMBER archive. An analysis of the proper motion data of Hipparcos and Tycho-2 together with the Hipparcos Intermediate Astrometric Data help identify the possible cause for the observed asymmetry.
Results. The Herschel/PACS images of $π^1$ Gru show an elliptical CSE whose properties agree with those derived from a CO map published in the literature. In addition, an arc east of the star is visible at a distance of $38^{\prime\prime}$ from the primary. This arc is most likely part of an Archimedean spiral caused by an already known G0V companion that is orbiting the primary at a projected distance of 460 au with a period of more than 6200 yr. However, the presence of the elliptical CSE, proper motion variations, and geometric modelling of the VLTI/AMBER observations point towards a third component in the system, with an orbital period shorter than 10 yr, orbiting much closer to the primary than the G0V star.
△ Less
Submitted 25 August, 2014; v1 submitted 18 August, 2014;
originally announced August 2014.
-
Fundamental parameters of 16 late-type stars derived from their angular diameter measured with VLTI/AMBER
Authors:
P. Cruzalèbes,
A. Jorissen,
Y. Rabbia,
S. Sacuto,
A. Chiavassa,
E. Pasquato,
B. Plez,
K. Eriksson,
A. Spang,
O. Chesneau
Abstract:
Thanks to their large angular dimension and brightness, red giants and supergiants are privileged targets for optical long-baseline interferometers. Sixteen red giants and supergiants have been observed with the VLTI/AMBER facility over a two-years period, at medium spectral resolution (R=1500) in the K band. The limb-darkened angular diameters are derived from fits of stellar atmospheric models o…
▽ More
Thanks to their large angular dimension and brightness, red giants and supergiants are privileged targets for optical long-baseline interferometers. Sixteen red giants and supergiants have been observed with the VLTI/AMBER facility over a two-years period, at medium spectral resolution (R=1500) in the K band. The limb-darkened angular diameters are derived from fits of stellar atmospheric models on the visibility and the triple product data. The angular diameters do not show any significant temporal variation, except for one target: TX Psc, which shows a variation of 4% using visibility data. For the eight targets previously measured by Long-Baseline Interferometry (LBI) in the same spectral range, the difference between our diameters and the literature values is less than 5%, except for TX Psc, which shows a difference of 11%. For the 8 other targets, the present angular diameters are the first measured from LBI. Angular diameters are then used to determine several fundamental stellar parameters, and to locate these targets in the Hertzsprung-Russell Diagram (HRD). Except for the enigmatic Tc-poor low-mass carbon star W Ori, the location of Tc-rich stars in the HRD matches remarkably well the thermally-pulsating AGB, as it is predicted by the stellar-evolution models. For pulsating stars with periods available, we compute the pulsation constant and locate the stars along the various sequences in the Period -- Luminosity diagram. We confirm the increase in mass along the pulsation sequences, as predicted by the theory, except for W Ori which, despite being less massive, appears to have a longer period than T Cet along the first-overtone sequence.
△ Less
Submitted 13 June, 2013;
originally announced June 2013.
-
SPIDAST: a new modular software to process spectro-interferometric measurements
Authors:
Pierre Cruzalèbes,
Yves Rabbia,
Alain Jorissen,
Alain Spang,
Stéphane Sacuto,
Ester Pasquato,
Andrea Chiavassa,
Olivier Chesneau,
Patrick Fréville
Abstract:
Extracting stellar fundamental parameters from SPectro-Interferometric (SPI) data requires reliable estimates of observables and with robust uncertainties (visibility, triple product, phase closure). A number of fine calibration procedures is necessary throughout the reduction process. Testing departures from centro-symmetry of brightness distributions is a useful complement. Developing a set of a…
▽ More
Extracting stellar fundamental parameters from SPectro-Interferometric (SPI) data requires reliable estimates of observables and with robust uncertainties (visibility, triple product, phase closure). A number of fine calibration procedures is necessary throughout the reduction process. Testing departures from centro-symmetry of brightness distributions is a useful complement. Developing a set of automatic routines, called SPIDAST (made available to the community) to reduce, calibrate and interpret raw data sets of instantaneous spectro-interferograms at the spectral channel level, we complement (and in some respects improve) the ones contained in the amdlib Data Reduction Software. Our new software SPIDAST is designed to work in an automatic mode, free from subjective choices, while being versatile enough to suit various processing strategies. SPIDAST performs the following automated operations: weighting of non-aberrant SPI data (visibility, triple product), fine spectral calibration (sub-pixel level), accurate and robust determinations of stellar diameters for calibrator sources (and their uncertainties as well), correction for the degradations of the interferometer response in visibility and triple product, calculation of the Centro-Symmetry Parameter (CSP) from the calibrated triple product, fit of parametric chromatic models on SPI observables, to extract model parameters. SPIDAST is currently applied to the scientific study of 18 cool giant and supergiant stars, observed with the VLTI/AMBER facility at medium resolution in the K band. Because part of their calibrators have no diameter in the current catalogs, SPIDAST provides new determinations of the angular diameters of all calibrators. Comparison of SPIDAST final calibrated observables with amdlib determinations shows good agreement, under good and poor seeing conditions.
△ Less
Submitted 5 April, 2013;
originally announced April 2013.
-
Radiative hydrodynamics simulations of red supergiant stars. III. Spectro-photocentric variability, photometric variability, and consequences on Gaia measurements
Authors:
A. Chiavassa,
E. Pasquato,
A. Jorissen,
S. Sacuto,
C. Babusiaux,
B. Freytag,
H. -G. Ludwig,
P. Cruzalebes,
Y. Rabbia,
A. Spang,
O. Chesneau
Abstract:
Context. It has been shown that convection in red supergiant stars gives rise to large granules causing surface inhomogeneities together with shock waves in the photosphere. The resulting motion of the photocenter (on time scales ranging from months to years) could possibly have adverse effects on the parallax determination with Gaia. Aims. We explore the impact of the granulation on the photocent…
▽ More
Context. It has been shown that convection in red supergiant stars gives rise to large granules causing surface inhomogeneities together with shock waves in the photosphere. The resulting motion of the photocenter (on time scales ranging from months to years) could possibly have adverse effects on the parallax determination with Gaia. Aims. We explore the impact of the granulation on the photocentric and photometric variability. We quantify these effects in order to better characterize the error possibly altering the parallax. Methods. We use 3D radiative-hydrodynamics simulations of convection with CO5BOLD and the post-processing radiative transfer code OPTIM3D to compute intensity maps and spectra in the Gaia G band [325-1030 nm]. Results. We provide astrometric and photometric predictions from 3D simulations of RSGs that are used to evaluate the degradation of the astrometric parameters of evolved stars derived by Gaia. We show from RHD simulations that a supergiant like Betelgeuse exhibits a photocentric noise characterised by a standard deviation of the order of 0.1 AU. The number of bright giant and supergiant stars whose Gaia parallaxes will be altered by the photocentric noise ranges from a few tens to several thousandths. The degradation of the astrometric fit due to the presence of this photocentric noise will be noticeable up to about 5 kpc for the brightest supergiants. Moreover, parallaxes of supergiants are affected by a error of the order of a few percents. We show that the photocentric noise, as predicted by the 3D simulation, does account for a substantial part of the supplementary 'cosmic noise' that affects Hipparcos measurements of Betelgeuse and Antares.
△ Less
Submitted 23 December, 2010;
originally announced December 2010.
-
Angular diameter estimation of interferometric calibrators - Example of lambda Gruis, calibrator for VLTI-AMBER
Authors:
P. Cruzalebes,
A. Jorissen,
S. Sacuto,
D. Bonneau
Abstract:
Context. Accurate long-baseline interferometric measurements require careful calibration with reference stars. Small calibrators with high angular diameter accuracy ensure the true visibility uncertainty to be dominated by the measurement errors. Aims. We review some indirect methods for estimating angular diameter, using various types of input data. Each diameter estimate, obtained for the test-c…
▽ More
Context. Accurate long-baseline interferometric measurements require careful calibration with reference stars. Small calibrators with high angular diameter accuracy ensure the true visibility uncertainty to be dominated by the measurement errors. Aims. We review some indirect methods for estimating angular diameter, using various types of input data. Each diameter estimate, obtained for the test-case calibrator star lambda Gru, is compared with the value 2.71 mas found in the Bordé calibrator catalogue published in 2002. Methods. Angular size estimations from spectral type, spectral index, in-band magnitude, broadband photometry, and spectrophotometry give close estimates of the angular diameter, with slightly variable uncertainties. Fits on photometry and spectrophotometry need physical atmosphere models with "plausible" stellar parameters. Angular diameter uncertainties were estimated by means of residual bootstrapping confidence intervals. All numerical results and graphical outputs presented in this paper were obtained using the routines developed under PV-WAVE, which compose the modular software suite SPIDAST, created to calibrate and interprete spectroscopic and interferometric measurements, particularly those obtained with VLTI-AMBER. Results. The final angular diameter estimate 2.70 mas of lambda Gru, with 68% confidence interval 2.65-2.81 mas, is obtained by fit of the MARCS model on the ISO-SWS 2.38-27.5 mum spectrum, with the stellar parameters T_eff = 4 250 K, log(g) = 2.0, z = 0.0 dex, M = 1.0 M_sun, and xi_turb = 2.0 km/s.
△ Less
Submitted 23 March, 2010;
originally announced March 2010.
-
The close circumstellar environment of the semi-regular S-type star Pi^1 Gruis
Authors:
Stéphane Sacuto,
Alain Jorissen,
Pierre Cruzalèbes,
Olivier Chesneau,
Keiichi Ohnaka,
Andreas Quirrenbach,
Bruno Lopez
Abstract:
We study the close circumstellar environment of the nearby S-type star Pi^1 Gruis using high spatial-resolution, mid-infrared observations from the ESO/VLTI. Spectra and visibilities were obtained with the MIDI interferometer on the VLT Auxiliary Telescopes. The cool M5III giant Beta Gruis was used as bright primary calibrator, and a dedicated spectro-interferometric study was undertaken to dete…
▽ More
We study the close circumstellar environment of the nearby S-type star Pi^1 Gruis using high spatial-resolution, mid-infrared observations from the ESO/VLTI. Spectra and visibilities were obtained with the MIDI interferometer on the VLT Auxiliary Telescopes. The cool M5III giant Beta Gruis was used as bright primary calibrator, and a dedicated spectro-interferometric study was undertaken to determine its angular diameter accurately. The MIDI measurements were fitted with the 1D numerical radiative transfer code DUSTY to determine the dust shell parameters of Pi^1 Gruis. Taking into account the low spatial extension of the model in the 8-9 $μ$m spectral band for the smallest projected baselines, we consider the possibility of a supplementary molecular shell. The MIDI visibility and phase data are mostly dominated by the spherical 21 mas (694 Rsol) central star, while the extended dusty environment is over-resolved even with the shortest baselines. No obvious departure from spherical symmetry is found on the milliarcsecond scale. The spectro-interferometric observations are well-fitted by an optically thin (tau(dust)<0.01 in the band) dust shell that is located at about 14 stellar radii with a typical temperature of 700 K and composed of 70% silicate and 30% of amorphous alumina grains. An optically thin (tau(mol)<0.1 in the N band) H2O+SiO molecular shell extending from the photosphere of the star up to 4.4 stellar radii with a typical temperature of 1000 K is added to the model to improve the fit in the 8-9 $μ$m spectral band. We discuss the probable binary origin of asymmetries as revealed by millimetric observations.
△ Less
Submitted 20 March, 2008;
originally announced March 2008.
-
A compact dust shell in the symbiotic system HM Sge
Authors:
Stéphane Sacuto,
Olivier Chesneau,
Martin Vannier,
Pierre Cruzalèbes
Abstract:
We present high spatial resolution observations of the mid-infrared core of the dusty symbiotic system HM Sge. The MIDI interferometer was used with the VLT UTs and ATs providing baselines oriented from PA=42° to 105°. The MIDI visibilities are compared with the ones predicted in the frame of various spherical dust shells published in the literature involving single or double dusty shell…
▽ More
We present high spatial resolution observations of the mid-infrared core of the dusty symbiotic system HM Sge. The MIDI interferometer was used with the VLT UTs and ATs providing baselines oriented from PA=42° to 105°. The MIDI visibilities are compared with the ones predicted in the frame of various spherical dust shells published in the literature involving single or double dusty shells. The mid-IR environment is unresolved by a 8m telescope and the MIDI spectrum exhibits a level similar to the ISO spectra recorded 10 yr ago. The estimated Gaussian HWHM of the shell of 12AU in the 8-9$μ$m range, and 18AU in the 11-12$μ$m range, are much smaller than the angular separation between the Mira and the White Dwarf of 60AU. The discrepancies between the HWHM at different angle orientations suggest an increasing level of asymmetry from 13 to 8$μ$m. The observations are well fitted by the densest and smallest model published in the literature based on the ISO data, although such a model does not account for the variations of near-IR photometry due to the Mira pulsation cycle suggesting a much smaller optical thickness. These observations also discard the two shells models, developed to take into account the effect of the WD illumination onto the dusty wind of the Mira. These observations show that a high rate of dust formation is occurring in the vicinity of the Mira which seems to be not highly perturbed by the hot companion.
△ Less
Submitted 14 February, 2007;
originally announced February 2007.
-
SearchCal: a Virtual Observatory tool for searching calibrators in optical long baseline interferometry. I: The bright object case
Authors:
Daniel Bonneau,
J. -M. Clausse,
X. Delfosse,
D. Mourard,
S. Cetre,
A. Chelli,
P. Cruzalèbes,
G. Duvert,
G. Zins
Abstract:
In long baseline interferometry, the raw fringe contrast must be calibrated to obtain the true visibility and then those observables that can be interpreted in terms of astrophysical parameters. The selection of suitable calibration stars is crucial for obtaining the ultimate precision of interferometric instruments like the VLTI. We have developed software SearchCal that builds an evolutive cat…
▽ More
In long baseline interferometry, the raw fringe contrast must be calibrated to obtain the true visibility and then those observables that can be interpreted in terms of astrophysical parameters. The selection of suitable calibration stars is crucial for obtaining the ultimate precision of interferometric instruments like the VLTI. We have developed software SearchCal that builds an evolutive catalog of stars suitable as calibrators within any given user-defined angular distance and magnitude around the scientific target. We present the first version of SearchCal dedicated to the bright-object case V<=10; K<=5). Star catalogs available at the CDS are consulted via web requests. They provide all the useful information for selecting of calibrators. Missing photometries are computed with an accuracy of 0.1 mag and the missing angular diameters are calculated with a precision better than 10%. For each star the squared visibility is computed by taking the wavelength and the maximum baseline of the foreseen observation into account.} SearchCal is integrated into ASPRO, the interferometric observing preparation software developed by the JMMC, available at the address: http://mariotti.fr.
△ Less
Submitted 3 July, 2006;
originally announced July 2006.
-
The last gasps of VY CMa: Aperture synthesis and adaptive optics imagery
Authors:
J. D. Monnier,
P. G. Tuthill,
B. Lopez,
P. Cruzalebes,
W. C. Danchi,
C. A. Haniff
Abstract:
We present new observations of the red supergiant VY CMa at 1.25 micron, 1.65 micron, 2.26 micron, 3.08 micron and 4.8 micron. Two complementary observational techniques were utilized: non-redundant aperture masking on the 10-m Keck-I telescope yielding images of the innermost regions at unprecedented resolution, and adaptive optics imaging on the ESO 3.6-m telescope at La Silla attaining extrem…
▽ More
We present new observations of the red supergiant VY CMa at 1.25 micron, 1.65 micron, 2.26 micron, 3.08 micron and 4.8 micron. Two complementary observational techniques were utilized: non-redundant aperture masking on the 10-m Keck-I telescope yielding images of the innermost regions at unprecedented resolution, and adaptive optics imaging on the ESO 3.6-m telescope at La Silla attaining extremely high (~10^5) peak-to-noise dynamic range over a wide field. For the first time the inner dust shell has been resolved in the near-infrared to reveal a one-sided extension of circumstellar emission within 0.1" (~15 R_star) of the star. The line-of-sight optical depths of the circumstellar dust shell at 1.65 micron, 2.26 micron, and 3.08 micron have been estimated to be 1.86 +/- 0.42, 0.85 +/- 0.20, and 0.44 +/- 0.11. These new results allow the bolometric luminosity of VY~CMa to be estimated independent of the dust shell geometry, yielding L_star ~ 2x10^5 L_sun. A variety of dust condensations, including a large scattering plume and a bow-shaped dust feature, were observed in the faint, extended nebula up to 4" from the central source. While the origin of the nebulous plume remains uncertain, a geometrical model is developed assuming the plume is produced by radially-driven dust grains forming at a rotating flow insertion point with a rotational period between 1200-4200 years, which is perhaps the stellar rotational period or the orbital period of an unseen companion.
△ Less
Submitted 1 October, 1998;
originally announced October 1998.