Showing 1–7 of 7 results for author: Dunwoody, R

In search of short gamma-ray burst optical counterpart with the Zwicky Transient Facility

Authors: Tomás Ahumada, Shreya Anand, Michael W. Coughlin, Igor Andreoni, Erik C. Kool, Harsh Kumar, Simeon Reusch, Ana Sagués-Carracedo, Robert Stein, S. Bradley Cenko, Mansi M. Kasliwal, Leo P. Singer, Rachel Dunwoody, Joseph Mangan, Varun Bhalerao, Mattia Bulla, Eric Burns, Matthew J. Graham, David L. Kaplan, Daniel Perley, Mouza Almualla, Joshua S. Bloom, Virginia Cunningham, Kishalay De, Pradip Gatkine , et al. (24 additional authors not shown)

Abstract: The Fermi Gamma-ray Burst Monitor (GBM) triggers on-board in response to $\sim$ 40 short gamma-ray bursts (SGRBs) per year; however, their large localization regions have made the search for optical counterparts a challenging endeavour. We have developed and executed an extensive program with the wide field of view of the Zwicky Transient Facility (ZTF) camera, mounted on the Palomar 48 inch Oschi… ▽ More The Fermi Gamma-ray Burst Monitor (GBM) triggers on-board in response to $\sim$ 40 short gamma-ray bursts (SGRBs) per year; however, their large localization regions have made the search for optical counterparts a challenging endeavour. We have developed and executed an extensive program with the wide field of view of the Zwicky Transient Facility (ZTF) camera, mounted on the Palomar 48 inch Oschin telescope (P48), to perform target-of-opportunity (ToO) observations on 10 Fermi-GBM SGRBs during 2018 and 2020-2021. Bridging the large sky areas with small field of view optical telescopes in order to track the evolution of potential candidates, we look for the elusive SGRB afterglows and kilonovae (KNe) associated with these high-energy events. No counterpart has yet been found, even though more than 10 ground based telescopes, part of the Global Relay of Observatories Watching Transients Happen (GROWTH) network, have taken part in these efforts. The candidate selection procedure and the follow-up strategy have shown that ZTF is an efficient instrument for searching for poorly localized SGRBs, retrieving a reasonable number of candidates to follow-up and showing promising capabilities as the community approaches the multi-messenger era. Based on the median limiting magnitude of ZTF, our searches would have been able to retrieve a GW170817-like event up to $\sim$ 200 Mpc and SGRB afterglows to z = 0.16 or 0.4, depending on the assumed underlying energy model. Future ToOs will expand the horizon to z = 0.2 and 0.7 respectively. △ Less

Submitted 22 March, 2022; originally announced March 2022.

A compact instrument for gamma-ray burst detection on a CubeSat platform II: Detailed design, assembly and validation

Authors: David Murphy, Alexey Ulyanov, Sheila McBreen, Joseph Mangan, Rachel Dunwoody, Maeve Doyle, Conor O'Toole, Joseph Thompson, Jack Reilly, Sarah Walsh, Brian Shortt, Antonio Martin-Carrillo, Lorraine Hanlon

Abstract: The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. T… ▽ More The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. This paper presents the detailed GMOD design and the accommodation of the instrument within the restrictive CubeSat form factor. The electronic and mechanical interfaces are compatible with many off-the-shelf CubeSat systems and structures. The energy response of the GMOD engineering qualification model has been determined using radioactive sources, and an energy resolution of 5.4% at 662keV has been measured. EIRSAT-1 will perform on-board processing of GMOD data. Trigger results, including light-curves and spectra, will be incorporated into the spacecraft beacon and transmitted continuously. Inexpensive hardware can be used to decode the beacon signal, making the data accessible to a wide community. GMOD will have scientific capability for the detection of gamma-ray bursts, in addition to the educational and technology demonstration goals of the EIRSAT-1 mission. The detailed design and measurements to date demonstrate the capability of GMOD in low Earth orbit, the scalability of the design for larger CubeSats and as an element of future large gamma-ray missions. △ Less

Submitted 7 March, 2022; originally announced March 2022.

Comments: 31 pages, 16 figures. This is an author accepted manuscript of an article accepted for publication in Experimental Astronomy. The final open-access version will be available at: https://doi.org/10.1007/s10686-022-09842-z

Embedded Firmware Development for a Novel CubeSat Gamma-Ray Detector

Authors: Joseph Mangan, David Murphy, Rachel Dunwoody, Maeve Doyle, Alexey Ulyanov, Lorraine Hanlon, Brian Shortt, Sheila McBreen, Masoud Emam, Jessica Erkal, Joe Flanagan, Gianluca Fontanesi, Andrew Gloster, Conor O'Toole, Favour Okosun, Rakhi RajagopalanNair, Jack Reilly, Lána Salmon, Daire Sherwin, Joseph Thompson, Sarah Walsh, Daithí de Faoite, Mike Hibbett, Umair Javaid, Fergal Marshall , et al. (4 additional authors not shown)

Abstract: The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the M… ▽ More The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the MSP430 microprocessor which manages the experiment including readout, storage and configuration of the system. The firmware has been verified in a series of experiments testing the response over a realistic range of input detector trigger frequencies from 50Hz to 1kHz for the primary time tagged event (TTE) data. The power consumption and ability of the firmware to successfully receive and transmit the packets to the on-board computer was investigated. The experiment demonstrated less than 1% loss of packets up to 1kHz for the standard transfer mode with the power not exceeding 31mW. The transfer performance and power consumption demonstrated are within the required range of this CubeSat instrument. △ Less

Submitted 4 November, 2021; originally announced November 2021.

Comments: 9 pages, 5 figures. This paper was presented at the 8th IEEE International Conference on Space Mission Challenges for Information Technology, July 26-30, 2021, and will appear in the conference proceedings. This work has been submitted to the IEEE for publication. Copyright may be transferred without notice, after which this version may no longer be accessible

A compact instrument for gamma-ray burst detection on a CubeSat platform I: Design drivers and expected performance

Authors: David Murphy, Alexey Ulyanov, Sheila McBreen, Maeve Doyle, Rachel Dunwoody, Joseph Mangan, Joseph Thompson, Brian Shortt, Antonio Martin-Carrillo, Lorraine Hanlon

Abstract: The Educational Irish Research Satellite 1 (EIRSAT-1) is a 2U CubeSat being developed under ESA's Fly Your Satellite! programme. The project has many aspects, which are primarily educational, but also include space qualification of new detector technologies for gamma-ray astronomy and the detection of gamma-ray bursts (GRBs). The Gamma-ray Module (GMOD), the main mission payload, is a small gamma-… ▽ More The Educational Irish Research Satellite 1 (EIRSAT-1) is a 2U CubeSat being developed under ESA's Fly Your Satellite! programme. The project has many aspects, which are primarily educational, but also include space qualification of new detector technologies for gamma-ray astronomy and the detection of gamma-ray bursts (GRBs). The Gamma-ray Module (GMOD), the main mission payload, is a small gamma-ray spectrometer comprising a 25 mm $\times$ 25 mm $\times$ 40 mm cerium bromide scintillator coupled to an array of 16 silicon photomultipliers. The readout is provided by IDE3380 (SIPHRA), a low-power and radiation tolerant readout ASIC. GMOD will detect gamma-rays and measure their energies in a range from tens of keV to a few MeV. Monte Carlo simulations were performed using the Medium Energy Gamma-ray Astronomy Library to evaluate GMOD's capability for the detection of GRBs in low Earth orbit. The simulations used a detailed mass model of the full spacecraft derived from a very high-fidelity 3D CAD model. The sky-average effective area of GMOD on board EIRSAT-1 was found to be 10 cm$^2$ at 120 keV. The instrument is expected to detect between 11 and 14 GRBs, at a significance greater than 10$σ$ (and up to 32 at 5$σ$), during a nominal one-year mission. The shape of the scintillator in GMOD results in omni-directional sensitivity which allows for a nearly all-sky field of view. △ Less

Submitted 18 August, 2021; originally announced August 2021.

Comments: 27 pages, 13 figures. This is an author accepted manuscript of an article published in Experimental Astronomy. The final open-access version is available at: https://doi.org/10.1007/s10686-021-09779-9

Discovery and confirmation of the shortest gamma ray burst from a collapsar

Authors: Tomas Ahumada, Leo P. Singer, Shreya Anand, Michael W. Coughlin, Mansi M. Kasliwal, Geoffrey Ryan, Igor Andreoni, S. Bradley Cenko, Christoffer Fremling, Harsh Kumar, Peter T. H. Pang, Eric Burns, Virginia Cunningham, Simone Dichiara, Tim Dietrich, Dmitry S. Svinkin, Mouza Almualla, Alberto J. Castro-Tirado, Kishalay De, Rachel Dunwoody, Pradip Gatkine, Erica Hammerstein, Shabnam Iyyani, Joseph Mangan, Dan Perley , et al. (32 additional authors not shown)

Abstract: Gamma-ray bursts (GRBs) are among the brightest and most energetic events in the universe. The duration and hardness distribution of GRBs has two clusters, now understood to reflect (at least) two different progenitors. Short-hard GRBs (SGRBs; T90 <2 s) arise from compact binary mergers, while long-soft GRBs (LGRBs; T90 >2 s) have been attributed to the collapse of peculiar massive stars (collapsa… ▽ More Gamma-ray bursts (GRBs) are among the brightest and most energetic events in the universe. The duration and hardness distribution of GRBs has two clusters, now understood to reflect (at least) two different progenitors. Short-hard GRBs (SGRBs; T90 <2 s) arise from compact binary mergers, while long-soft GRBs (LGRBs; T90 >2 s) have been attributed to the collapse of peculiar massive stars (collapsars). The discovery of SN 1998bw/GRB 980425 marked the first association of a LGRB with a collapsar and AT 2017gfo/GRB 170817A/GW170817 marked the first association of a SGRB with a binary neutron star merger, producing also gravitational wave (GW). Here, we present the discovery of ZTF20abwysqy (AT2020scz), a fast-fading optical transient in the Fermi Satellite and the InterPlanetary Network (IPN) localization regions of GRB 200826A; X-ray and radio emission further confirm that this is the afterglow. Follow-up imaging (at rest-frame 16.5 days) reveals excess emission above the afterglow that cannot be explained as an underlying kilonova (KN), but is consistent with being the supernova (SN). Despite the GRB duration being short (rest-frame T90 of 0.65 s), our panchromatic follow-up data confirms a collapsar origin. GRB 200826A is the shortest LGRB found with an associated collapsar; it appears to sit on the brink between a successful and a failed collapsar. Our discovery is consistent with the hypothesis that most collapsars fail to produce ultra-relativistic jets. △ Less

Submitted 13 May, 2021; v1 submitted 11 May, 2021; originally announced May 2021.

Comments: submitted to Nature Astronomy

Assembly, Integration, and Verification Activities for a 2U CubeSat, EIRSAT-1

Authors: Sarah Walsh, David Murphy, Maeve Doyle, Joseph Thompson, Rachel Dunwoody, Masoud Emam, Jessica Erkal, Joe Flanagan, Gianluca Fontanesi, Andrew Gloster, Joe Mangan, Conor O'Toole, Favour Okosun, Rakhi Rajagopalan Nair, Jack Reilly, Lána Salmon, Daire Sherwin, Paul Cahill, Daithí de Faoite, Umair Javaid, Lorraine Hanlon, David McKeown, William O'Connor, Kenneth Stanton, Alexei Ulyanov , et al. (2 additional authors not shown)

Abstract: The Educational Irish Research Satellite, EIRSAT-1, is a project developed by students at University College Dublin that aims to design, build, and launch Ireland's first satellite. EIRSAT-1 is a 2U CubeSat incorporating three novel payloads; GMOD, a gamma-ray detector, EMOD, a thermal coating management experiment, and WBC, a novel attitude control algorithm. The EIRSAT-1 project is carried out w… ▽ More The Educational Irish Research Satellite, EIRSAT-1, is a project developed by students at University College Dublin that aims to design, build, and launch Ireland's first satellite. EIRSAT-1 is a 2U CubeSat incorporating three novel payloads; GMOD, a gamma-ray detector, EMOD, a thermal coating management experiment, and WBC, a novel attitude control algorithm. The EIRSAT-1 project is carried out with the support of the Education Office of the European Space Agency, under the educational Fly your Satellite! programme. The Assembly, Integration and Verification plan for EIRSAT-1 is central to the philosophy and the development of the spacecraft. The model philosophy employed for the project is known as the 'prototype' approach in which two models of the spacecraft are assembled; an Engineering Qualification Model (EQM) and a Flight Model (FM). The payloads, GMOD and EMOD, and the Antenna Deployment Module (ADM) platform element warrant a Development Model in addition to an EQM and a FM, as they have been designed and developed in-house. After successful completion of the Critical Design Review and Ambient Test Readiness Review phases of the project, the EQM of EIRSAT-1 will be assembled and integrated. After assembly and integration of the EQM, the project will begin the ambient test campaign, in which the EQM undergoes ambient functional and mission testing. This work details the preparation and execution of the assembly, integration, and verification activities of EIRSAT-1 EQM. △ Less

Submitted 20 October, 2020; originally announced October 2020.

Comments: Conference paper of the 3rd Symposium on Space Educational Activities (SSEA 2019)

Journal ref: Proceedings of the 3rd Symposium on Space Educational Activities, 2019, pp. 128-132

Flight Software Development for the EIRSAT-1 Mission

Authors: Maeve Doyle, Andrew Gloster, Conor O'Toole, Joseph Mangan, David Murphy, Rachel Dunwoody, Masoud Emam, Jessica Erkal, Joe Flanaghan, Gianluca Fontanesi, Favour Okosun, Rakhi Rajagopalan Nair, Jack Reilly, Lána Salmon, Daire Sherwin, Joseph Thompson, Sarah Walsh, Daithí de Faoite, Umair Javaid, Sheila McBreen, David McKeown, Derek O'Callaghan, William O'Connor, Kenneth Stanton, Alexei Ulyanov , et al. (2 additional authors not shown)

Abstract: The Educational Irish Research Satellite, known as EIRSAT-1, is a student-led project to design, build, test and launch Ireland's first satellite. The on-board software for this mission is being developed using Bright Ascension's GenerationOne Flight Software Development Kit. This paper provides an overview of this kit and of EIRSAT-1's on-board software design. Drawing on the team's contrasting e… ▽ More The Educational Irish Research Satellite, known as EIRSAT-1, is a student-led project to design, build, test and launch Ireland's first satellite. The on-board software for this mission is being developed using Bright Ascension's GenerationOne Flight Software Development Kit. This paper provides an overview of this kit and of EIRSAT-1's on-board software design. Drawing on the team's contrasting experience with writing entirely custom firmware for the mission's science payloads, this work discusses the impact of using a kit on the software development process. The challenges associated with the educational nature of this project are the focus of this discussion. The objective of this paper is to provide useful information for other CubeSat teams assessing software development options. △ Less

Submitted 20 August, 2020; originally announced August 2020.

Comments: Conference paper submitted to the 3rd Symposium on Space Educational Activities (SSEA 2019)

Journal ref: Proceedings of the 3rd Symposium on Space Educational Activities, 2019, pp. 157-161