-
Detection of frequency-dependent dispersion measure toward the millisecond pulsar PSR J2241-5236 from contemporaneous wide-band observations
Authors:
Dilpreet Kaur,
N. D. Ramesh Bhat,
Shi Dai,
Samuel J. McSweeney,
Ryan M. Shannon,
Sanjay Kudale,
Willem van Straten
Abstract:
Making precise measurements of pulsar dispersion measures (DMs) and applying suitable corrections for them is amongst the major challenges in high-precision timing programmes such as pulsar timing arrays (PTAs). While the advent of wide-band pulsar instrumentation can enable more precise DM measurements and thence improved timing precision, it also necessitates doing careful assessments of frequen…
▽ More
Making precise measurements of pulsar dispersion measures (DMs) and applying suitable corrections for them is amongst the major challenges in high-precision timing programmes such as pulsar timing arrays (PTAs). While the advent of wide-band pulsar instrumentation can enable more precise DM measurements and thence improved timing precision, it also necessitates doing careful assessments of frequency-dependent (chromatic) DMs that was theorised by Cordes et al. (2016). Here we report the detection of such an effect in broadband observations of the millisecond pulsar PSR J2241-5236, a high-priority target for current and future PTAs. The observations were made contemporaneously using the wide-band receivers and capabilities now available at the Murchison Widefield Array (MWA), the upgraded Giant Metrewave Radio Telescope (uGMRT) and the Parkes telescopes, thus providing an unprecedentedly large frequency coverage from 80 MHz to 4 GHz. Our analysis shows the measurable changes in DM that scale with the observing frequency ($ν$) as $\rm δDM \sim ν^{2.5 \pm 0.1}$. We discuss the potential implications of such a frequency dependence in the measured DMs, and the likely impact on the timing noise budget, and comment on the usefulness of low-frequency observations in advancing PTA efforts.
△ Less
Submitted 17 April, 2022;
originally announced April 2022.
-
The 21-cm signal from the Cosmic Dawn: metallicity dependence of high mass X-ray binaries
Authors:
Harman Deep Kaur,
Yuxiang Qin,
Andrei Mesinger,
Andrea Pallottini,
Tassos Fragos,
Antara Basu-Zych
Abstract:
X-rays from High-Mass X-ray Binaries (HMXBs) are likely the main source of heating of the intergalactic medium (IGM) during Cosmic Dawn (CD), before the completion of reionization. This Epoch of Heating (EoH; $z\sim 10-15$) should soon be detected via the redshifted 21-cm line from neutral hydrogen, allowing us to indirectly study the properties of HMXBs in the unseen, first galaxies. Low-redshift…
▽ More
X-rays from High-Mass X-ray Binaries (HMXBs) are likely the main source of heating of the intergalactic medium (IGM) during Cosmic Dawn (CD), before the completion of reionization. This Epoch of Heating (EoH; $z\sim 10-15$) should soon be detected via the redshifted 21-cm line from neutral hydrogen, allowing us to indirectly study the properties of HMXBs in the unseen, first galaxies. Low-redshift observations, as well as theoretical models, imply that the integrated X-ray luminosity to star formation rate of HMXBs ($L_{\rm X}/{\rm SFR}$) should increase in metal-poor environments, typical of early galaxies. Here we study the impact of the metallicity ($Z$) dependence of $L_{\rm X}/{\rm SFR}$ during the EoH. For our fiducial models, galaxies with star formation rates of order $10^{-3} - 10^{-1}$ $M_\odot$ yr$^{-1}$ and metallicities of order $10^{-3} - 10^{-2}$ $Z_\odot$ are the dominant contributors to the X-ray background (XRB) during this period. Different $L_{\rm X}/{\rm SFR}$-$Z$ relations result in factors of $\sim$ 3 differences in these ranges, as well as in the mean IGM temperature and the large-scale 21-cm power, at a given redshift. We compute mock 21-cm observations adopting as a baseline a 1000h integration with the upcoming Square Kilometer Array (SKA), for two different $L_{\rm X}/{\rm SFR}$-$Z$ relations. We perform inference on these mock observations using the common simplification of a constant $L_{\rm X}/{\rm SFR}$, finding that constant $L_{\rm X}/{\rm SFR}$ models can recover the IGM evolution of the more complicated $L_{\rm X}/{\rm SFR}$-$Z$ simulations only during the EoH. At $z<10$, where the typical galaxies are more polluted, constant $L_{\rm X}/{\rm SFR}$ models over-predict the XRB and its relative contribution to the early stages of the reionization.
△ Less
Submitted 3 May, 2022; v1 submitted 21 March, 2022;
originally announced March 2022.
-
The MeerKAT Telescope as a Pulsar Facility: System verification and early science results from MeerTime
Authors:
M. Bailes,
A. Jameson,
F. Abbate,
E. D. Barr,
N. D. R. Bhat,
L. Bondonneau,
M. Burgay,
S. J. Buchner,
F. Camilo,
D. J. Champion,
I. Cognard,
P. B. Demorest,
P. C. C. Freire,
T. Gautam,
M. Geyer,
J. M. Griessmeier,
L. Guillemot,
H. Hu,
F. Jankowski,
S. Johnston,
A. Karastergiou,
R. Karuppusamy,
D. Kaur,
M. J. Keith,
M. Kramer
, et al. (50 additional authors not shown)
Abstract:
We describe system verification tests and early science results from the pulsar processor (PTUSE) developed for the newly-commissioned 64-dish SARAO MeerKAT radio telescope in South Africa. MeerKAT is a high-gain (~2.8 K/Jy) low-system temperature (~18 K at 20cm) radio array that currently operates from 580-1670 MHz and can produce tied-array beams suitable for pulsar observations. This paper pres…
▽ More
We describe system verification tests and early science results from the pulsar processor (PTUSE) developed for the newly-commissioned 64-dish SARAO MeerKAT radio telescope in South Africa. MeerKAT is a high-gain (~2.8 K/Jy) low-system temperature (~18 K at 20cm) radio array that currently operates from 580-1670 MHz and can produce tied-array beams suitable for pulsar observations. This paper presents results from the MeerTime Large Survey Project and commissioning tests with PTUSE. Highlights include observations of the double pulsar J0737-3039A, pulse profiles from 34 millisecond pulsars from a single 2.5h observation of the Globular cluster Terzan 5, the rotation measure of Ter5O, a 420-sigma giant pulse from the Large Magellanic Cloud pulsar PSR J0540-6919, and nulling identified in the slow pulsar PSR J0633-2015. One of the key design specifications for MeerKAT was absolute timing errors of less than 5 ns using their novel precise time system. Our timing of two bright millisecond pulsars confirm that MeerKAT delivers exceptional timing. PSR J2241-5236 exhibits a jitter limit of <4 ns per hour whilst timing of PSR J1909-3744 over almost 11 months yields an rms residual of 66 ns with only 4 min integrations. Our results confirm that the MeerKAT is an exceptional pulsar telescope. The array can be split into four separate sub-arrays to time over 1000 pulsars per day and the future deployment of S-band (1750-3500 MHz) receivers will further enhance its capabilities.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
Minimum size of 21-cm simulations
Authors:
Harman Deep Kaur,
Nicolas Gillet,
Andrei Mesinger
Abstract:
Cosmic 21cm interferometry is set to revolutionize our understanding of the Epoch of Reionization (EoR) and the Cosmic Dawn (CD). However, the signal has structure on a huge range of scales, requiring large simulation boxes to statistically capture the relevant fields. In this work we quantify the minimum box size for simulating the power spectrum (PS) of the cosmic 21cm signal. We perform multipl…
▽ More
Cosmic 21cm interferometry is set to revolutionize our understanding of the Epoch of Reionization (EoR) and the Cosmic Dawn (CD). However, the signal has structure on a huge range of scales, requiring large simulation boxes to statistically capture the relevant fields. In this work we quantify the minimum box size for simulating the power spectrum (PS) of the cosmic 21cm signal. We perform multiple realizations of the initial conditions, for a range of box sizes. We quantify convergence with respect to a mock observation of box length 1.1 Gpc, with thermal noise computed for a 1000h observation with SKA1-low. We find that simulations of box lengths 200-300 Mpc underestimate the large-scale power during the CD by ~7-9 % on average. We conclude that box lengths of $L\gtrsim250$ Mpc are needed to converge at the level of <~1$σ$ of the total noise.
△ Less
Submitted 22 March, 2022; v1 submitted 14 April, 2020;
originally announced April 2020.
-
A high time resolution study of the millisecond pulsar J2241-5236 at frequencies below 300 MHz
Authors:
D. Kaur,
N. D. R. Bhat,
S. E. Tremblay,
R. M. Shannon,
S. J. McSweeney,
S. M. Ord,
A. P. Beardsley,
B. Crosse,
D. Emrich,
T. M. O. Franzen,
L. Horsley,
M. Johnston-Hollitt,
D. L. Kaplan,
D. Kenney,
M. F. Morales,
D. Pallot,
K. Steele,
S. J. Tingay,
C. M. Trott,
M. Walker,
R. B. Wayth1,
A. Williams,
C. Wu
Abstract:
One of the major challenges for pulsar timing array (PTA) experiments is the mitigation of the effects of the turbulent interstellar medium (ISM) from timing data. These can potentially lead to measurable delays and/or distortions in the pulse profiles and scale strongly with the inverse of the radio frequency. Low-frequency observations are therefore highly appealing for characterizing them. Howe…
▽ More
One of the major challenges for pulsar timing array (PTA) experiments is the mitigation of the effects of the turbulent interstellar medium (ISM) from timing data. These can potentially lead to measurable delays and/or distortions in the pulse profiles and scale strongly with the inverse of the radio frequency. Low-frequency observations are therefore highly appealing for characterizing them. However, in order to achieve the necessary time resolution to resolve profile features of short-period millisecond pulsars, phase-coherent de-dispersion is essential, especially at frequencies below $300$ MHz. We present the lowest-frequency ($80$-$220$ MHz), coherently de-dispersed detections of one of the most promising pulsars for current and future PTAs, PSR J2241$-$5236, using our new beam-former software for the MWA's voltage capture system (VCS), which reconstructs the time series at a much higher time resolution of $\sim 1 μ$s by re-synthesizing the recorded voltage data at $10$-kHz/$100$-$μ$s native resolutions. Our data reveal a dual-precursor type feature in the pulse profile that is either faint or absent in high-frequency observations from Parkes. The resultant high-fidelity detections have enabled dispersion measure (DM) determinations with very high precision, of the order of $(2$-$6)\times10^{-6}$ $\rm pc\,cm^{-3}$, owing to the microsecond level timing achievable for this pulsar at the MWA's low frequencies. This underscores the usefulness of low-frequency observations for probing the ISM toward PTA pulsars and informing optimal observing strategies for PTA experiments.
△ Less
Submitted 21 July, 2019;
originally announced July 2019.
