-
2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Narsireddy Anugu,
Rodrigo Amezcua-Correa,
Ritoban Basu Thakur,
Charles Beichman,
Chad Bender,
Jean-Philippe Berger,
Azzurra Bigioli,
Joss Bland-Hawthorn,
Guillaume Bourdarot,
Charles M. Bradford,
Ronald Broeke,
Julia Bryant,
Kevin Bundy,
Ross Cheriton,
Nick Cvetojevic,
Momen Diab,
Scott A. Diddams,
Aline N. Dinkelaker,
Jeroen Duis,
Stephen Eikenberry,
Simon Ellis,
Akira Endo,
Donald F. Figer
, et al. (55 additional authors not shown)
Abstract:
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio…
▽ More
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Astrophotonics: astronomy and modern optics
Authors:
S. Minardi,
R. Harris,
L. Labadie
Abstract:
Much of the progress in Astronomy has been driven by instrumental developments, from the first telescopes to fiber fed spectrographs. In this review we describe the field of astrophotonics, a combination of photonics and astronomical instrumentation that has the potential to drive the next generation of developements. We begin with the science cases that have been identified as possibly benefiting…
▽ More
Much of the progress in Astronomy has been driven by instrumental developments, from the first telescopes to fiber fed spectrographs. In this review we describe the field of astrophotonics, a combination of photonics and astronomical instrumentation that has the potential to drive the next generation of developements. We begin with the science cases that have been identified as possibly benefiting from astrophotonic devices. We then discuss devices, methods and developments in the field along with the advantages they provide. We conclude by describing possible future developments in the field and their influence on astronomy.
△ Less
Submitted 8 November, 2020; v1 submitted 27 March, 2020;
originally announced March 2020.
-
Photonics-based mid-infrared interferometry: 4-year results of the ALSI project and future prospects
Authors:
L. Labadie,
S. Minardi,
J. Tepper,
R. Diener,
B. Muthusubramanian,
J. -U. Pott,
S. Nolte,
S. Gross,
A. Arriola,
M. J. Withford
Abstract:
In this contribution, we review the results of the ALSI project (Advanced Laser-writing for Stellar Interferometry), aimed at assessing the potential of ultrafast laser writing to fabricate mid-infared integrated optics (IO) devices with performance compatible with an implementation in real interferometric instruments like Hi5 or PFI. Waveguides for the L, L' and M bands with moderate propagation…
▽ More
In this contribution, we review the results of the ALSI project (Advanced Laser-writing for Stellar Interferometry), aimed at assessing the potential of ultrafast laser writing to fabricate mid-infared integrated optics (IO) devices with performance compatible with an implementation in real interferometric instruments like Hi5 or PFI. Waveguides for the L, L' and M bands with moderate propagation losses were manufactured in Gallium Lanthanum Sulfide and ZBLAN glasses and used to develop photonic building blocks as well as a full mid-IR 4-telescope beam combiner. We discuss the advantages and disadvantages of the tested combiners and discuss a possible roadmap for the continuation of this work.
△ Less
Submitted 5 March, 2020;
originally announced March 2020.
-
Modal analysis using photonic lanterns coupled to arrays of waveguides
Authors:
Momen Diab,
Stefano Minardi
Abstract:
We present a new concept of an integrated optics component capable of measuring the complex amplitudes of the modes at the tip of a multimode waveguide. The device uses a photonic lantern to split the optical power carried by an $N$-modes waveguide among a collection of single-mode waveguides that excite a periodic array of at least $N^2$ single-mode evanescently-coupled waveguides. The power dete…
▽ More
We present a new concept of an integrated optics component capable of measuring the complex amplitudes of the modes at the tip of a multimode waveguide. The device uses a photonic lantern to split the optical power carried by an $N$-modes waveguide among a collection of single-mode waveguides that excite a periodic array of at least $N^2$ single-mode evanescently-coupled waveguides. The power detected at each output of the array is a linear combination of the products of the modal amplitudes-a relation that can, under suitable conditions, be inverted allowing the derivation of the amplitudes and relative phases of the modal mixture at the input. The expected performance of the device is discussed and its application to the real-time measurement of modal instability in high power fiber lasers is proposed.
△ Less
Submitted 12 March, 2019; v1 submitted 11 March, 2019;
originally announced March 2019.
-
A six-apertures discrete beam combiners for J-band interferometry
Authors:
Ettore Pedretti,
Simone Piacentini,
Giacomo Corrielli,
Roberto Osellame,
Stefano Minardi
Abstract:
The astronomical J-band (1.25 micrometres) is a relatively untapped wave-band in long-baseline infrared interferometry. It allows access to the photosphere in giant and super-giant stars relatively free from opacities of molecular bands. The J-band can potentially be used for imaging spots in the 1350 nm ionised iron line on slowly rotating magnetically-active stars through spectro-interferometry.…
▽ More
The astronomical J-band (1.25 micrometres) is a relatively untapped wave-band in long-baseline infrared interferometry. It allows access to the photosphere in giant and super-giant stars relatively free from opacities of molecular bands. The J-band can potentially be used for imaging spots in the 1350 nm ionised iron line on slowly rotating magnetically-active stars through spectro-interferometry. In addition, the access to the 1080 nanometres He I line may probe outflows and funnel-flows in T-Tauri stars and allow the study of the star-disk interaction.
We present the progress in the development of a six-inputs, J-band interferometric beam combiner based on the discrete beam combiner (DBC) concept. DBCs are periodic arrays of evanescent coupled waveguides which can be used to retrieve simultaneously the complex visibility of every baseline from a multi-aperture interferometer. Existing, planned or future interferometric facilities combine or will combine six or more telescopes at the time, thus increasing the snapshot uv coverage from the interferometric measurements. A better uv coverage will consequently enhance the accuracy of the image reconstruction.
The component we are currently developing is manufactured in borosilicate glass using the technique of multi-pass ultrafast laser inscription (ULI), using a mode-locked Yb:KYW laser at the wavelength of 1030 nm, pulse duration of 300 fs and repetition rate of 1 MHz. After annealing, the written components showed a propagation loss less than 0.3 dB/cm and a negligible birefringence at a wavelength of 1310 nm, which makes the components suitable for un-polarized light operation. A single mode fiber-to-component insertion loss of 0.9 dB was measured. Work is currently in progress to characterize the components in spectro-interferometric mode with white light covering the J-band spectrum.
△ Less
Submitted 4 September, 2018;
originally announced September 2018.
-
The Planet Formation Imager
Authors:
John D. Monnier,
Stefan Kraus,
Michael J. Ireland,
Fabien Baron,
Amelia Bayo,
Jean-Philippe Berger,
Michelle Creech-Eakman,
Ruobing Dong,
Gaspard Duchene,
Catherine Espaillat,
Chris Haniff,
Sebastian Honig,
Andrea Isella,
Attila Juhasz,
Lucas Labadie,
Sylvestre Lacour,
Stephanie Leifer,
Antoine Merand,
Ernest Michael,
Stefano Minardi,
Christoph Mordasini,
David Mozurkewich,
Johan Olofsson,
Claudia Paladini,
Romain Petrov
, et al. (14 additional authors not shown)
Abstract:
The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially se…
▽ More
The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H2O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality.
△ Less
Submitted 30 July, 2018;
originally announced July 2018.
-
Hi-5: a potential high-contrast thermal near-infrared imager for the VLTI
Authors:
D. Defrère,
M. Ireland,
O. Absil,
J. -P. Berger,
W. C. Danchi,
S. Ertel,
A. Gallenne,
F. Hénault,
P. Hinz,
E. Huby,
S. Kraus,
L. Labadie,
J. -B. Le Bouquin,
G. Martin,
A. Matter,
B. Mennesson,
A. Mérand,
S. Minardi,
J. D. Monnier,
B. Norris,
G. Orban de Xivry,
E. Pedretti,
J. -U. Pott,
M. Reggiani,
E. Serabyn
, et al. (3 additional authors not shown)
Abstract:
Hi-5 is a high-contrast (or high dynamic range) infrared imager project for the VLTI. Its main goal is to characterize young extra-solar planetary systems and exozodiacal dust around southern main-sequence stars. In this paper, we present an update of the project and key technology pathways to improve the contrast achieved by the VLTI. In particular, we discuss the possibility to use integrated op…
▽ More
Hi-5 is a high-contrast (or high dynamic range) infrared imager project for the VLTI. Its main goal is to characterize young extra-solar planetary systems and exozodiacal dust around southern main-sequence stars. In this paper, we present an update of the project and key technology pathways to improve the contrast achieved by the VLTI. In particular, we discuss the possibility to use integrated optics, proven in the near-infrared, in the thermal near-infrared (L and M bands, 3-5~$μ$m) and advanced fringe tracking strategies. We also address the strong exoplanet science case (young exoplanets, planet formation, and exozodiacal disks) offered by this wavelength regime as well as other possible science cases such as stellar physics (fundamental parameters and multiplicity) and extragalactic astrophysics (active galactic nuclei and fundamental constants). Synergies and scientific preparation for other potential future instruments such as the Planet Formation Imager are also briefly discussed.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
NAIR: Novel Astronomical Instrumentation through photonic Reformatting
Authors:
Robert J. Harris,
Jan Tepper,
John J. Davenport,
Ettore Pedretti,
Dionne M. Haynes,
Philipp Hottinger,
Theodoros Anagnos,
Abani Shankar Nayak,
Yohana Herrero Alonso,
Pranab Jyoti Deka,
Stefano Minardi,
Andreas Quirrenbach,
Lucas Labadie,
Roger Haynes
Abstract:
The project "Novel Astronomical Instrumentation through photonic Reformatting" is a DFG-funded collaboration to exploit the recognized potential of photonics solutions for a radically new approach to astronomical instrumentation for optical/infrared high precision spectroscopy and high angular resolution imaging. We present a project overview and initial development results from our Adaptive Optic…
▽ More
The project "Novel Astronomical Instrumentation through photonic Reformatting" is a DFG-funded collaboration to exploit the recognized potential of photonics solutions for a radically new approach to astronomical instrumentation for optical/infrared high precision spectroscopy and high angular resolution imaging. We present a project overview and initial development results from our Adaptive Optics-photonic test bed, Ultrafast Laser Inscribed waveguides for interferometric beam combination and 3D printing structures for astronomical instrumentation. The project is expected to lead to important technological breakthroughs facilitating uniquely functionality and technical solutions for the next generation of instrumentation.
△ Less
Submitted 12 July, 2018;
originally announced July 2018.
-
Space-based infrared interferometry to study exoplanetary atmospheres
Authors:
D. Defrère,
A. Léger,
O. Absil,
C. Beichman,
B. Biller,
W. C. Danchi,
K. Ergenzinger,
C. Eiroa,
S. Ertel,
M. Fridlund,
A. Garcia Munoz,
M. Gillon,
A. Glasse,
M. Godolt,
J. L. Grenfell,
S. Kraus,
L. Labadie,
S. Lacour,
R. Liseau,
G. Martin,
B. Mennesson,
G. Micela,
S. Minardi,
S. P. Quanz,
H. Rauer
, et al. (8 additional authors not shown)
Abstract:
The quest for other habitable worlds and the search for life among them are major goals of modern astronomy. One way to make progress towards these goals is to obtain high-quality spectra of a large number of exoplanets over a broad range of wavelengths. While concepts currently investigated in the United States are focused on visible/NIR wavelengths, where the planets are probed in reflected ligh…
▽ More
The quest for other habitable worlds and the search for life among them are major goals of modern astronomy. One way to make progress towards these goals is to obtain high-quality spectra of a large number of exoplanets over a broad range of wavelengths. While concepts currently investigated in the United States are focused on visible/NIR wavelengths, where the planets are probed in reflected light, a compelling alternative to characterize planetary atmospheres is the mid-infrared waveband (5-20~$μ$m). Indeed, mid-infrared observations provide key information on the presence of an atmosphere, the surface conditions (e.g., temperature, pressure, habitability), and the atmospheric composition in important species such as H$_2$O, CO$_2$, O$_3$, CH$_4$, and N$_2$O. This information is essential to investigate the potential habitability of exoplanets and to make progress towards the search for life in the universe. Obtaining high-quality mid-infrared spectra of exoplanets from the ground is however extremely challenging due to the overwhelming brightness and turbulence of Earth's atmosphere. In this paper, we present a concept of space-based mid-infrared interferometer that can tackle this observing challenge and discuss the main technological developments required to launch such a sophisticated instrument.
△ Less
Submitted 21 December, 2018; v1 submitted 12 January, 2018;
originally announced January 2018.
-
The path towards high-contrast imaging with the VLTI: the Hi-5 project
Authors:
D. Defrère,
O. Absil,
J. -P. Berger,
T. Boulet,
W. C. Danchi,
S. Ertel,
A. Gallenne,
F. Hénault,
P. Hinz,
E. Huby,
M. Ireland,
S. Kraus,
L. Labadie,
J. -B. Le Bouquin,
G. Martin,
A. Matter,
A. Mérand,
B. Mennesson,
S. Minardi,
J. Monnier,
B. Norris,
G. Orban de Xivry,
E. Pedretti,
J. -U. Pott,
M. Reggiani
, et al. (4 additional authors not shown)
Abstract:
The development of high-contrast capabilities has long been recognized as one of the top priorities for the VLTI. As of today, the VLTI routinely achieves contrasts of a few 10$^{-3}$ in the near-infrared with PIONIER (H band) and GRAVITY (K band). Nulling interferometers in the northern hemisphere and non-redundant aperture masking experiments have, however, demonstrated that contrasts of at leas…
▽ More
The development of high-contrast capabilities has long been recognized as one of the top priorities for the VLTI. As of today, the VLTI routinely achieves contrasts of a few 10$^{-3}$ in the near-infrared with PIONIER (H band) and GRAVITY (K band). Nulling interferometers in the northern hemisphere and non-redundant aperture masking experiments have, however, demonstrated that contrasts of at least a few 10$^{-4}$ are within reach using specific beam combination and data acquisition techniques. In this paper, we explore the possibility to reach similar or higher contrasts on the VLTI. After reviewing the state-of-the-art in high-contrast infrared interferometry, we discuss key features that made the success of other high-contrast interferometric instruments (e.g., integrated optics, nulling, closure phase, and statistical data reduction) and address possible avenues to improve the contrast of the VLTI by at least one order of magnitude. In particular, we discuss the possibility to use integrated optics, proven in the near-infrared, in the thermal near-infrared (L and M bands, 3-5 $μ$m), a sweet spot to image and characterize young extra-solar planetary systems. Finally, we address the science cases of a high-contrast VLTI imaging instrument and focus particularly on exoplanet science (young exoplanets, planet formation, and exozodiacal disks), stellar physics (fundamental parameters and multiplicity), and extragalactic astrophysics (active galactic nuclei and fundamental constants). Synergies and scientific preparation for other potential future instruments such as the Planet Formation Imager are also briefly discussed.
△ Less
Submitted 25 May, 2018; v1 submitted 12 January, 2018;
originally announced January 2018.
-
Integrated optics prototype beam combiner for long baseline interferometry in the L and M bands
Authors:
Jan Tepper,
Lucas Labadie,
Romina Diener,
Stefano Minardi,
Jörg-Uwe Pott,
Robert R. Thomson,
Stefan Nolte
Abstract:
In the last few years, integrated optics (IO) beam combiners have facilitated the emergence of 4-telescope interferometers such as PIONIER or GRAVITY, boosting the imaging capabilities of the VLTI. However, the spectral range beyond 2.2microns is not ideally covered by the conventional silica based IO. Here, we propose to consider new laser-written IO prototypes made of GLS glasses, a material tha…
▽ More
In the last few years, integrated optics (IO) beam combiners have facilitated the emergence of 4-telescope interferometers such as PIONIER or GRAVITY, boosting the imaging capabilities of the VLTI. However, the spectral range beyond 2.2microns is not ideally covered by the conventional silica based IO. Here, we propose to consider new laser-written IO prototypes made of GLS glasses, a material that permits access to the mid-infrared spectral regime. Our goal is to conduct a full characterization of our mid-IR IO 2-telescope coupler in order to measure the performance levels directly relevant for long-baseline interferometry. We focus in particular on the exploitation of the L and M astronomical bands. We use a dedicated Michelson-interferometer setup to perform Fourier Transform spectroscopy on the coupler and measure its broadband interferometric performance. We also analyze the polarization properties of the coupler, the differential dispersion and phase degradation as well as the modal behavior and the total throughput. We measure broadband interferometric contrasts of 94.9% and 92.1% for unpolarized light in the L and M bands. Spectrally integrated splitting ratios are close to 50% but show chromatic dependence over the considered bandwidths. Additionally, the phase variation due to the combiner is measured and does not exceed 0.04rad and 0.07rad across the band L and M band, respectively. The total throughput of the coupler including Fresnel and injection losses from free-space is 25.4%. The laser-written IO GLS prototype combiners prove to be a reliable technological solution with promising performance for mid-infrared long-baseline interferometry. In the next steps, we will consider more advanced optical functions as well as a fiber-fed input and revise the optical design parameters in order the further enhance the total throughput and achromatic behavior.
△ Less
Submitted 19 April, 2017;
originally announced April 2017.
-
Astronomical photonics in the context of infrared interferometry and high-resolution spectroscopy
Authors:
Lucas Labadie,
Jean-Philippe Berger,
Nick Cvetojevic,
Roger Haynes,
Robert Harris,
Nemanja Jovanovic,
Sylvestre Lacour,
Guillermo Martin,
Stefano Minardi,
Guy Perrin,
Martin Roth,
Robert R. Thomson
Abstract:
We review the potential of Astrophotonics, a relatively young field at the interface between photonics and astronomical instrumentation, for spectro-interferometry. We review some fundamental aspects of photonic science that drove the emer- gence of astrophotonics, and highlight the achievements in observational astrophysics. We analyze the prospects for further technological development also cons…
▽ More
We review the potential of Astrophotonics, a relatively young field at the interface between photonics and astronomical instrumentation, for spectro-interferometry. We review some fundamental aspects of photonic science that drove the emer- gence of astrophotonics, and highlight the achievements in observational astrophysics. We analyze the prospects for further technological development also considering the potential synergies with other fields of physics (e.g. non-linear optics in condensed matter physics). We also stress the central role of fiber optics in routing and transporting light, delivering complex filters, or interfacing instruments and telescopes, more specifically in the context of a growing usage of adaptive optics.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
Beam combination schemes and technologies for the Planet Formation Imager (PFI)
Authors:
Stefano Minardi,
Sylvestre Lacour,
Jean-Philippe Berger,
Lucas Labadie,
Robert R. Thomson,
Chris Haniff,
Michael Ireland
Abstract:
The Planet Formation Imager (PFI) initiative aims at developing the next generation large scale facility for imaging astronomical optical interferometry operating in the mid-infrared. Here we report on the progress of the Planet Formation Imager Technical Working Group on the beam-combination instruments. We will discuss various available options for the science and fringe-tracker beam combination…
▽ More
The Planet Formation Imager (PFI) initiative aims at developing the next generation large scale facility for imaging astronomical optical interferometry operating in the mid-infrared. Here we report on the progress of the Planet Formation Imager Technical Working Group on the beam-combination instruments. We will discuss various available options for the science and fringe-tracker beam combination instruments, ranging from direct imaging, to non-redundant fiber arrays, to integrated optics solutions. Besides considering basic characteristics of the schemes, we will investigate the maturity of the available technological platforms at near- and mid-infrared wavelengths.
△ Less
Submitted 17 August, 2016; v1 submitted 1 August, 2016;
originally announced August 2016.
-
Status of the Planet Formation Imager (PFI) concept
Authors:
Michael J. Ireland,
John D. Monnier,
Stefan Kraus,
Andrea Isella,
Stefano Minardi,
Romain Petrov,
Theo ten Brummelaar,
John Young,
Gautum Vasisht,
David Mozurkewich,
Stephen Rinehart,
Ernest A. Michael,
Gerard van Belle,
Julien Woillez
Abstract:
The Planet Formation Imager (PFI) project aims to image the period of planet assembly directly, resolving structures as small as a giant planet's Hill sphere. These images will be required in order to determine the key mechanisms for planet formation at the time when processes of grain growth, protoplanet assembly, magnetic fields, disk/planet dynamical interactions and complex radiative transfer…
▽ More
The Planet Formation Imager (PFI) project aims to image the period of planet assembly directly, resolving structures as small as a giant planet's Hill sphere. These images will be required in order to determine the key mechanisms for planet formation at the time when processes of grain growth, protoplanet assembly, magnetic fields, disk/planet dynamical interactions and complex radiative transfer all interact - making some planetary systems habitable and others inhospitable. We will present the overall vision for the PFI concept, focusing on the key technologies and requirements that are needed to achieve the science goals. Based on these key requirements, we will define a cost envelope range for the design and highlight where the largest uncertainties lie at this conceptual stage.
△ Less
Submitted 16 August, 2016; v1 submitted 1 August, 2016;
originally announced August 2016.
-
Architecture design study and technology roadmap for the Planet Formation Imager (PFI)
Authors:
John D. Monnier,
Michael J. Ireland,
Stefan Kraus,
Fabien Baron,
Michelle Creech-Eakman,
Ruobing Dong,
Andrea Isella,
Antoine Merand,
Ernest Michael,
Stefano Minardi,
David Mozurkewich,
Romain Petrov,
Stephen Rinehard,
Theo ten Brummelaar,
Gautum Vasisht,
Ed Wishnow,
John Young,
Zhaohuan Zhu
Abstract:
The Planet Formation Imager (PFI) Project has formed a Technical Working Group (TWG) to explore possible facility architectures to meet the primary PFI science goal of imaging planet formation in situ in nearby star- forming regions. The goals of being sensitive to dust emission on solar system scales and resolving the Hill-sphere around forming giant planets can best be accomplished through sub-m…
▽ More
The Planet Formation Imager (PFI) Project has formed a Technical Working Group (TWG) to explore possible facility architectures to meet the primary PFI science goal of imaging planet formation in situ in nearby star- forming regions. The goals of being sensitive to dust emission on solar system scales and resolving the Hill-sphere around forming giant planets can best be accomplished through sub-milliarcsecond imaging in the thermal infrared. Exploiting the 8-13 micron atmospheric window, a ground-based long-baseline interferometer with approximately 20 apertures including 10km baselines will have the necessary resolution to image structure down 0.1 milliarcseconds (0.014 AU) for T Tauri disks in Taurus. Even with large telescopes, this array will not have the sensitivity to directly track fringes in the mid-infrared for our prime targets and a fringe tracking system will be necessary in the near-infrared. While a heterodyne architecture using modern mid-IR laser comb technology remains a competitive option (especially for the intriguing 24 and 40μm atmospheric windows), the prioritization of 3-5μm observations of CO/H2O vibrotational levels by the PFI-Science Working Group (SWG) pushes the TWG to require vacuum pipe beam transport with potentially cooled optics. We present here a preliminary study of simulated L- and N-band PFI observations of a realistic 4-planet disk simulation, finding 21x2.5m PFI can easily detect the accreting protoplanets in both L and N-band but can see non-accreting planets only in L band. (abridged -- see PDF for full abstract)
△ Less
Submitted 16 August, 2016; v1 submitted 1 August, 2016;
originally announced August 2016.
-
Integrated optics interferometric four telescopes nuller
Authors:
Ronny Errmann,
Stefano Minardi,
Lucas Labadie,
Felix Dreisow,
Stefan Nolte,
Thomas Pertsch
Abstract:
Nulling interferometry has been identified as a competitive technique for the detection of extrasolar planets. The technique consists in combining out-of-phase pairs of telescopes to null effectively the light of a bright star an reveal the dim glow of the companion. We have manufactured and tested with monochromatic light an integrated optics component which combines a linear array of 4 telescope…
▽ More
Nulling interferometry has been identified as a competitive technique for the detection of extrasolar planets. The technique consists in combining out-of-phase pairs of telescopes to null effectively the light of a bright star an reveal the dim glow of the companion. We have manufactured and tested with monochromatic light an integrated optics component which combines a linear array of 4 telescopes in the nulling mode envisaged by Angel & Wolf (1997). Our testbench simulates the motion of a star in the sky. The tests have demonstrated a nulling scaling as the fourth power of the baseline delay.
△ Less
Submitted 26 May, 2014;
originally announced May 2014.
-
A broadband scalar optical vortex coronagraph
Authors:
Ronny Errmann,
Stefano Minardi,
Thomas Pertsch
Abstract:
In recent years, new coronagraphic schemes have been proposed, the most promising being the optical vortex phase mask coronagraphs. In our work, a new scheme of broadband optical scalar vortex coronagraph is proposed and characterized experimentally in the laboratory. Our setup employs a pair of computer generated phase gratings (one of them containing a singularity) to control the chromatic dispe…
▽ More
In recent years, new coronagraphic schemes have been proposed, the most promising being the optical vortex phase mask coronagraphs. In our work, a new scheme of broadband optical scalar vortex coronagraph is proposed and characterized experimentally in the laboratory. Our setup employs a pair of computer generated phase gratings (one of them containing a singularity) to control the chromatic dispersion of phase plates and achieves a constant peak-to-peak attenuation below 1:1000 over a bandwidth of 120 nm centered at 700 nm. An inner working angle of $λ$/D is demonstrated along with a raw contrast of 11.5\,magnitudes at 2$λ$/D. A more compact setup achieves a peak-to-peak attenuation below 1:1000 over a bandwidth of 60 nm with the other results remaining the same.
△ Less
Submitted 26 May, 2014;
originally announced May 2014.
-
3D-integrated beam combiner for optical spectro-interferometry
Authors:
Stefano Minardi,
Allar Saviauk,
Felix Dreisow,
Stefan Nolte,
Thomas Pertsch
Abstract:
We present a compact setup based on a three-dimensional integrated optical component, allowing the mea- surement of spectrally resolved complex-visibilities for three channels of polychromatic light. We have tested a prototype of the component in R band and showed that accurate complex visibilities could be retrieved over a bandwidth of 50 nm centered at 650 nm (resolution: R=130). Closure phase s…
▽ More
We present a compact setup based on a three-dimensional integrated optical component, allowing the mea- surement of spectrally resolved complex-visibilities for three channels of polychromatic light. We have tested a prototype of the component in R band and showed that accurate complex visibilities could be retrieved over a bandwidth of 50 nm centered at 650 nm (resolution: R=130). Closure phase stability in the order of $λ$/60 was achieved implying that the device could be used for spectro-interferometry imaging.
△ Less
Submitted 21 May, 2014;
originally announced May 2014.
-
A Broadband Scalar Vortex Coronagraph
Authors:
R. Errmann,
S. Minardi,
T. Pertsch
Abstract:
Broadband coronagraphy with deep nulling and small inner working angle has the potential of delivering images and spectra of exoplanets and other faint objects. In recent years, many coronagraphic schemes have been proposed, the most promising being the optical vortex phase mask coronagraphs. In this paper, a new scheme of broadband optical scalar vortex coronagraph is proposed and characterized e…
▽ More
Broadband coronagraphy with deep nulling and small inner working angle has the potential of delivering images and spectra of exoplanets and other faint objects. In recent years, many coronagraphic schemes have been proposed, the most promising being the optical vortex phase mask coronagraphs. In this paper, a new scheme of broadband optical scalar vortex coronagraph is proposed and characterized experimentally in the laboratory. Our setup employs a pair of computer generated phase gratings (one of them containing a singularity) to control the chromatic dispersion of phase plates and achieves a constant peak-to-peak attenuation below $1\cdot 10^{-3}$ over a bandwidth of 120 nm centered at 700 nm. An inner working angle of ~λ/D is demonstrated along with a raw contrast of 11.5 magnitudes at 2λ/D.
△ Less
Submitted 16 July, 2013;
originally announced July 2013.
-
Photonic lattices for astronomical interferometry
Authors:
Stefano Minardi
Abstract:
Regular two-dimensional lattices of evanescently coupled waveguides may provide in the near future photonic components capable of combining interferometrically and simultaneously a large number of telescopes, thus easing the imaging capabilities of optical interferometers. In this paper, the theoretical modeling of the so-called Discrete Beam Combiners (DBC) is described and compared to the conven…
▽ More
Regular two-dimensional lattices of evanescently coupled waveguides may provide in the near future photonic components capable of combining interferometrically and simultaneously a large number of telescopes, thus easing the imaging capabilities of optical interferometers. In this paper, the theoretical modeling of the so-called Discrete Beam Combiners (DBC) is described and compared to the conventional model used for photonic beam combiners for astronomical interferometry. The performance of DBCs as compared to an ideal ABCD beam combiner is discussed and applications to astronomical instrumentation analyzed.
△ Less
Submitted 27 February, 2012; v1 submitted 3 August, 2011;
originally announced August 2011.
-
High precision astrometry mission for the detection and characterization of nearby habitable planetary systems with the Nearby Earth Astrometric Telescope (NEAT)
Authors:
Fabien Malbet,
Alain Léger,
Michael Shao,
Renaud Goullioud,
Pierre-Olivier Lagage,
Anthony G. A. Brown,
Christophe Cara,
Gilles Durand,
Carlos Eiroa,
Philippe Feautrier,
Björn Jakobsson,
Emmanuel Hinglais,
Lisa Kaltenegger,
Lucas Labadie,
Anne-Marie Lagrange,
Jacques Laskar,
René Liseau,
Jonathan Lunine,
Jesús Maldonado,
Manuel Mercier,
Christoph Mordasini,
Didier Queloz,
Andreas Quirrenbach,
Alessandro Sozzetti,
Wesley Traub
, et al. (27 additional authors not shown)
Abstract:
(abridged) A complete census of planetary systems around a volume-limited sample of solar-type stars (FGK dwarfs) in the Solar neighborhood with uniform sensitivity down to Earth-mass planets within their Habitable Zones out to several AUs would be a major milestone in extrasolar planets astrophysics. This fundamental goal can be achieved with a mission concept such as NEAT - the Nearby Earth Astr…
▽ More
(abridged) A complete census of planetary systems around a volume-limited sample of solar-type stars (FGK dwarfs) in the Solar neighborhood with uniform sensitivity down to Earth-mass planets within their Habitable Zones out to several AUs would be a major milestone in extrasolar planets astrophysics. This fundamental goal can be achieved with a mission concept such as NEAT - the Nearby Earth Astrometric Telescope. NEAT is designed to carry out space-borne extremely-high-precision astrometric measurements sufficient to detect dynamical effects due to orbiting planets of mass even lower than Earth's around the nearest stars. Such a survey mission would provide the actual planetary masses and the full orbital geometry for all the components of the detected planetary systems down to the Earth-mass limit. The NEAT performance limits can be achieved by carrying out differential astrometry between the targets and a set of suitable reference stars in the field. The NEAT instrument design consists of an off-axis parabola single-mirror telescope, a detector with a large field of view made of small movable CCDs located around a fixed central CCD, and an interferometric calibration system originating from metrology fibers located at the primary mirror. The proposed mission architecture relies on the use of two satellites operating at L2 for 5 years, flying in formation and offering a capability of more than 20,000 reconfigurations (alternative option uses deployable boom). The NEAT primary science program will encompass an astrometric survey of our 200 closest F-, G- and K-type stellar neighbors, with an average of 50 visits. The remaining time might be allocated to improve the characterization of the architecture of selected planetary systems around nearby targets of specific interest (low-mass stars, young stars, etc.) discovered by Gaia, ground-based high-precision radial-velocity surveys.
△ Less
Submitted 16 August, 2011; v1 submitted 19 July, 2011;
originally announced July 2011.
-
Astrointerferometry with discrete optics
Authors:
Stefano Minardi,
Thomas Pertsch
Abstract:
We propose an innovative scheme exploiting discrete diffraction in a two dimensional array of coupled waveguides to determine the phase and amplitude of the mutual correlation function between any pair of three telescopes of an astrointerferometer.
We propose an innovative scheme exploiting discrete diffraction in a two dimensional array of coupled waveguides to determine the phase and amplitude of the mutual correlation function between any pair of three telescopes of an astrointerferometer.
△ Less
Submitted 27 May, 2010;
originally announced May 2010.
-
An active fiber sensor for mirror vibration metrology in astronomical interferometers
Authors:
S. Minardi,
A. Chipouline,
S. Krämer,
T. Pertsch,
R. Follert,
B. Stecklum,
R. Neuhäuser
Abstract:
We present a fiber sensor based on an active integrated component which could be effectively used to measure the longitudinal vibration modes of telescope mirrors in an interferometric array. We demonstrate the possibility to measure vibrations with frequencies up to $\simeq 100$ Hz with a precision better than 10 nm.
We present a fiber sensor based on an active integrated component which could be effectively used to measure the longitudinal vibration modes of telescope mirrors in an interferometric array. We demonstrate the possibility to measure vibrations with frequencies up to $\simeq 100$ Hz with a precision better than 10 nm.
△ Less
Submitted 13 May, 2009;
originally announced May 2009.