-
First light of BEaTriX, the new testing facility for the modular X-ray optics of the ATHENA mission
Authors:
S. Basso,
B. Salmaso,
D. Spiga,
M. Ghigo,
G. Vecchi,
G. Sironi,
V. Cotroneo,
P. Conconi,
E. Redaelli,
A. Bianco,
G. Pareschi,
G. Tagliaferri,
D. Sisana,
C. Pelliciari,
M. Fiorini,
S. Incorvaia,
M. Uslenghi,
L. Paoletti,
C. Ferrari,
R. Lolli,
A. Zappettini,
M. Sanchez del Rio,
G. Parodi,
V. Burwitz,
S. Rukdee
, et al. (13 additional authors not shown)
Abstract:
The Beam Expander Testing X-ray facility (BEaTriX) is a unique X-ray apparatus now operated at the Istituto Nazionale di Astrofisica (INAF), Osservatorio Astronomico di Brera (OAB), in Merate, Italy. It has been specifically designed to measure the point spread function (PSF) and the effective area (EA) of the X-ray mirror modules (MMs) of the Advanced Telescope for High-ENergy Astrophysics (ATHEN…
▽ More
The Beam Expander Testing X-ray facility (BEaTriX) is a unique X-ray apparatus now operated at the Istituto Nazionale di Astrofisica (INAF), Osservatorio Astronomico di Brera (OAB), in Merate, Italy. It has been specifically designed to measure the point spread function (PSF) and the effective area (EA) of the X-ray mirror modules (MMs) of the Advanced Telescope for High-ENergy Astrophysics (ATHENA), based on silicon pore optics (SPO) technology, for verification before integration into the mirror assembly. To this end, BEaTriX generates a broad, uniform, monochromatic, and collimated X-ray beam at 4.51 keV. [...] In BEaTriX, a micro-focus X-ray source with a titanium anode is placed in the focus of a paraboloidal mirror, which generates a parallel beam. A crystal monochromator selects the 4.51 keV line, which is expanded to the final size by a crystal asymmetrically cut with respect to the crystalline planes. [...] After characterization, the BEaTriX beam has the nominal dimensions of 170 mm x 60 mm, with a vertical divergence of 1.65 arcsec and a horizontal divergence varying between 2.7 and 3.45 arcsec, depending on the monochromator setting: either high collimation or high intensity. The flux per area unit varies from 10 to 50 photons/s/cm2 from one configuration to the other. The BEaTriX beam performance was tested using an SPO MM, whose entrance pupil was fully illuminated by the expanded beam, and its focus was directly imaged onto the camera. The first light test returned a PSF and an EA in full agreement with expectations. As of today, the 4.51 keV beamline of BEaTriX is operational and can characterize modular X-ray optics, measuring their PSF and EA with a typical exposure of 30 minutes. [...] We expect BEaTriX to be a crucial facility for the functional test of modular X-ray optics, such as the SPO MMs for ATHENA.
△ Less
Submitted 7 July, 2022; v1 submitted 30 June, 2022;
originally announced June 2022.
-
Evaluation of the surface strength of glass plates shaped by hot slumping process
Authors:
L. Proserpio,
S. Basso,
F. Borsa,
O. Citterio,
M. Civitani,
M. Ghigo,
G. Pareschi,
B. Salmaso,
G. Sironi,
D. Spiga,
G. Tagliaferri,
A. D'Este,
R. Dall'Igna,
M. Silvestri,
G. Parodi,
F. Martelli,
M. Bavdaz,
E. Wille
Abstract:
The Hot Slumping Technology is under development by several research groups in the world for the realization of grazing-incidence segmented mirrors for X-ray astronomy, based on thin glass plates shaped over a mould at temperatures above the transformation point. The performed thermal cycle and related operations might have effects on the strength characteristics of the glass, with consequences on…
▽ More
The Hot Slumping Technology is under development by several research groups in the world for the realization of grazing-incidence segmented mirrors for X-ray astronomy, based on thin glass plates shaped over a mould at temperatures above the transformation point. The performed thermal cycle and related operations might have effects on the strength characteristics of the glass, with consequences on the structural design of the elemental optical modules and consecutively on the entire X-ray optic for large astronomical missions like IXO and ATHENA. The mechanical strength of glass plates after they underwent the slumping process was tested through destructive double-ring tests in the context of a study performed by the Astronomical Observatory of Brera with the collaboration of Stazione Sperimentale del Vetro and BCV Progetti. The entire study has been realized on more than 200 D263 Schott borosilicate glass specimens of dimension 100 mm x 100 mm and thickness 0.4 mm, either flat or bent at a Radius of Curvature of 1000 mm through the particular pressure assisted hot slumping process developed by INAF-OAB. The collected experimental data have been compared to non-linear FEM analyses and treated with Weibull statistic to assess the current IXO glass X-ray telescope design, in terms of survival probability, when subject to static and acoustic loads characteristic of the launch phase. The paper describes the activities performed and presents the obtained results.
△ Less
Submitted 9 July, 2014; v1 submitted 14 February, 2014;
originally announced February 2014.
-
The ASTRI SST-2M Prototype: Structure and Mirror
Authors:
Rodolfo Canestrari,
Osvaldo Catalano,
Mauro Fiorini,
Enrico Giro,
Nicola La Palombara,
Giovanni Pareschi,
Luca Stringhetti,
Gino Tosti,
Stefano Vercellone,
Francesco Martelli,
Giancarlo Parodi,
Pierfrancesco Rossettini,
Raffaele Tomelleri
Abstract:
The next generation of IACT (Imaging Atmospheric Cherenkov Telescope) will explore the uppermost end of the VHE (Very High Energy) domain up to about few hundreds of TeV with unprecedented sensibility, angular resolution and imaging quality. To this end, INAF (Italian National Institute of Astrophysics) is currently developing a scientific and technological telescope prototype for the implementati…
▽ More
The next generation of IACT (Imaging Atmospheric Cherenkov Telescope) will explore the uppermost end of the VHE (Very High Energy) domain up to about few hundreds of TeV with unprecedented sensibility, angular resolution and imaging quality. To this end, INAF (Italian National Institute of Astrophysics) is currently developing a scientific and technological telescope prototype for the implementation of the CTA (Cherenkov Telescope Array) observatory. ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) foresees the full design, development, installation and calibration of a Small Size 4 meter class Telescope. The telescope, named SST-2M, is based on an aplanatic, wide field, double reflection optical layout in a Schwarzschild-Couder configuration. In this paper we report about the technological solutions adopted for the telescope and for the mirrors. In particular the structural and electro-mechanical design of the telescope and the results on the optical performance derived after the development of a prototype of the segments that will be assembled to form the primary mirror.
△ Less
Submitted 18 July, 2013;
originally announced July 2013.
-
Cold-shaping of thin glass foils as novel method for mirrors processing. From the basic concepts to mass production of mirrors
Authors:
Rodolfo Canestrari,
Giovanni Pareschi,
Giancarlo Parodi,
Francesco Martelli,
Nadia Missaglia,
Robert Banham
Abstract:
We present a method for the production of segmented optics. It is a novel processing developed at INAF-Osservatorio Astronomico di Brera (INAF-OAB) employing commercial of-the-shelf materials. It is based on the shaping of thin glass foils by means of forced bending, this occurring at room temperature (cold-shaping). The glass is then assembled into a sandwich structure for retaining the imposed s…
▽ More
We present a method for the production of segmented optics. It is a novel processing developed at INAF-Osservatorio Astronomico di Brera (INAF-OAB) employing commercial of-the-shelf materials. It is based on the shaping of thin glass foils by means of forced bending, this occurring at room temperature (cold-shaping). The glass is then assembled into a sandwich structure for retaining the imposed shape. The principal mechanical features of the mirrors are the very low weight, rigidity and environmental robustness. The cost and production time also turns to be very competitive. In this paper we sum up the results achieved during the r&d performed in the past years. We have investigated the theoretical limits of the structural components by means of parametric finite elements analyses; we also discuss the effects caused by the most common structural loads. Finally, the process implementation, the more significant validation tests and the mass production at the industry is described.
△ Less
Submitted 15 November, 2012;
originally announced November 2012.
