-
Spectral variations within solar flare ribbons
Authors:
A. G. M. Pietrow,
M. K. Druett,
V. Singh
Abstract:
Solar flare ribbons are intense brightenings of principally chromospheric material that are responsible for a large fraction of the chromospheric emission in solar and stellar flares. We present an on-disc observation of flare ribbon substructures in an X9.3-class flare observed by the Swedish 1-m Solar Telescope. We identify categories of ribbon substructures seen in the Ca II 8542 Å, H$α$, and C…
▽ More
Solar flare ribbons are intense brightenings of principally chromospheric material that are responsible for a large fraction of the chromospheric emission in solar and stellar flares. We present an on-disc observation of flare ribbon substructures in an X9.3-class flare observed by the Swedish 1-m Solar Telescope. We identify categories of ribbon substructures seen in the Ca II 8542 Å, H$α$, and Ca II K lines, focusing on their spatial locations and their (spectro-)polarimetric properties. Color Collapsed Plotting (COCOPLOT) software is used to assist in identifying areas of interest. We present five categories of spectral profiles within the general body of the flare ribbon: (1) Extremely broadened spectral line profiles, where the standard Fabry-Perot interferometer wavelength windows ($\approx 70$ km s$^{-1}$) are insufficiently wide to allow for a complete analysis of the dynamics and atmospheric conditions. The mechanisms causing this degree of this broadening are not yet clearly understood. (2) Long-lived, dense kernels that manifest as more saturated chromospheric line profiles with lower signal in both Stokes parameters. They are interpreted as footpoints of bunched magnetic field loops, whose chromospheric lines form at greater heights than the nearby areas. (3) Doppler-shifted leading edges of the flare ribbon in regions that transiently display lower Stokes signals due to the emission dominating at greater heights in the atmosphere. (4) Condensed coronal rain overlapping the flare ribbons in the line of sight, producing exceptionally high Doppler shifts near the footpoints...
△ Less
Submitted 17 May, 2024; v1 submitted 16 February, 2024;
originally announced February 2024.
-
3D non-LTE modeling of the stellar center-to-limb variation for transmission spectroscopy studies
Authors:
G. Canocchi,
K. Lind,
C. Lagae,
A. G. M. Pietrow,
A. M. Amarsi,
D. Kiselman,
O. Andriienko,
H. J. Hoeijmakers
Abstract:
Context. Transmission spectroscopy is one of the most powerful techniques to characterize transiting exoplanets since it allows to measure the abundance of the atomic and molecular species in the planetary atmosphere. However, the stellar lines can bias the determination of such abundances if their center-to-limb variations (CLVs) are not properly accounted for.
Aims. This paper aims to show tha…
▽ More
Context. Transmission spectroscopy is one of the most powerful techniques to characterize transiting exoplanets since it allows to measure the abundance of the atomic and molecular species in the planetary atmosphere. However, the stellar lines can bias the determination of such abundances if their center-to-limb variations (CLVs) are not properly accounted for.
Aims. This paper aims to show that three-dimensional (3D) radiation hydrodynamic models and non-local thermodynamic equilibrium (non-LTE) line formation are required for an accurate modeling of the stellar CLV of the Na I D$_1$ and K I resonance lines on transmission spectra.
Methods. We model the CLV of the Na I D$_1$ and K I resonance lines in the Sun with 3D non-LTE radiative transfer. The synthetic spectra are compared to solar observations with high spatial and spectral resolution, including new data collected with the CRISP instrument at the Swedish 1-m Solar Telescope between $μ=0.1$ and $μ=1.0$.
Results. Our 3D non-LTE modeling of the Na I D$_1$ resonance line at 5896 Å and the K I 7699 Å resonance line in the Sun is in good agreement with the observed CLV in the solar spectrum. The simulated CLV curve for a Jupiter-Sun system inferred with a 3D non-LTE analysis shows significant differences from that obtained from a 1D atmosphere. The latter tends to overestimate the amplitude of the transmission curve by a factor that is of the same order of magnitude as a planetary absorption depth (up to 0.2 %).
Conclusions. In order to correctly characterize exoplanetary atmospheres, 3D non-LTE synthetic spectra should be used to estimate the stellar CLV effect in transmission spectra of solar-like planet hosts. The work will be extended to other lines and FGK-type stars, allowing synthetic high-resolution spectra to mitigate the stellar contamination of low-resolution planetary spectra, e.g. those from JWST.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Ground-breaking Exoplanet Science with the ANDES spectrograph at the ELT
Authors:
Enric Palle,
Katia Biazzo,
Emeline Bolmont,
Paul Molliere,
Katja Poppenhaeger,
Jayne Birkby,
Matteo Brogi,
Gael Chauvin,
Andrea Chiavassa,
Jens Hoeijmakers,
Emmanuel Lellouch,
Christophe Lovis,
Roberto Maiolino,
Lisa Nortmann,
Hannu Parviainen,
Lorenzo Pino,
Martin Turbet,
Jesse Wender,
Simon Albrecht,
Simone Antoniucci,
Susana C. Barros,
Andre Beaudoin,
Bjorn Benneke,
Isabelle Boisse,
Aldo S. Bonomo
, et al. (34 additional authors not shown)
Abstract:
In the past decade the study of exoplanet atmospheres at high-spectral resolution, via transmission/emission spectroscopy and cross-correlation techniques for atomic/molecular mapping, has become a powerful and consolidated methodology. The current limitation is the signal-to-noise ratio during a planetary transit. This limitation will be overcome by ANDES, an optical and near-infrared high-resolu…
▽ More
In the past decade the study of exoplanet atmospheres at high-spectral resolution, via transmission/emission spectroscopy and cross-correlation techniques for atomic/molecular mapping, has become a powerful and consolidated methodology. The current limitation is the signal-to-noise ratio during a planetary transit. This limitation will be overcome by ANDES, an optical and near-infrared high-resolution spectrograph for the ELT. ANDES will be a powerful transformational instrument for exoplanet science. It will enable the study of giant planet atmospheres, allowing not only an exquisite determination of atmospheric composition, but also the study of isotopic compositions, dynamics and weather patterns, mapping the planetary atmospheres and probing atmospheric formation and evolution models. The unprecedented angular resolution of ANDES, will also allow us to explore the initial conditions in which planets form in proto-planetary disks. The main science case of ANDES, however, is the study of small, rocky exoplanet atmospheres, including the potential for biomarker detections, and the ability to reach this science case is driving its instrumental design. Here we discuss our simulations and the observing strategies to achieve this specific science goal. Since ANDES will be operational at the same time as NASA's JWST and ESA's ARIEL missions, it will provide enormous synergies in the characterization of planetary atmospheres at high and low spectral resolution. Moreover, ANDES will be able to probe for the first time the atmospheres of several giant and small planets in reflected light. In particular, we show how ANDES will be able to unlock the reflected light atmospheric signal of a golden sample of nearby non-transiting habitable zone earth-sized planets within a few tenths of nights, a scientific objective that no other currently approved astronomical facility will be able to reach.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Center-to-limb variation of spectral lines and their effect on full-disk observations
Authors:
Alexander G. M. Pietrow,
Adur Pastor Yabar
Abstract:
An accurate description of the center-to-limb variation (CLV) of stellar spectra is becoming an increasingly critical factor in both stellar and exoplanet characterization. In particular, the CLV of spectral lines is extremely challenging as its characterization requires highly detailed knowledge of the stellar physical conditions. To this end, we present the Numerical Empirical Sun-as-a-Star Inte…
▽ More
An accurate description of the center-to-limb variation (CLV) of stellar spectra is becoming an increasingly critical factor in both stellar and exoplanet characterization. In particular, the CLV of spectral lines is extremely challenging as its characterization requires highly detailed knowledge of the stellar physical conditions. To this end, we present the Numerical Empirical Sun-as-a-Star Integrator (NESSI) as a tool for translating high-resolution solar observations of a partial field of view into disk-integrated spectra that can be used to test common assumptions in stellar physics.
△ Less
Submitted 10 November, 2023;
originally announced November 2023.
-
Spectral Background-Subtracted Activity Maps
Authors:
Carsten Denker,
Meetu Verma,
Alexander G. M. Pietrow,
Ioannis Kontogiannis,
Robert Kamlah
Abstract:
High-resolution solar spectroscopy provides a wealth of information from photospheric and chromospheric spectral lines. However, the volume of data easily exceeds hundreds of millions of spectra on a single observation day. Therefore, methods are needed to identify spectral signatures of interest in multidimensional datasets. Background-subtracted activity maps (BaSAMs) have previously been used t…
▽ More
High-resolution solar spectroscopy provides a wealth of information from photospheric and chromospheric spectral lines. However, the volume of data easily exceeds hundreds of millions of spectra on a single observation day. Therefore, methods are needed to identify spectral signatures of interest in multidimensional datasets. Background-subtracted activity maps (BaSAMs) have previously been used to locate features of solar activity in time series of images and filtergrams. This research note shows how this method can be extended and adapted to spectral data.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Stellar surface information from the Ca II H&K lines I. Intensity profiles of the solar activity components
Authors:
M. Cretignier,
A. G. M. Pietrow,
S. Aigrain
Abstract:
The detection of Earth-like planets with the radial-velocity method is currently limited by the presence of stellar activity signatures. On rotational timescales, spots and plages (or faculae) are known to introduce different RV signals, but their corrections require better activity proxies. The best-known chromospheric activity proxies in the visible are the Ca II H & K lines, but the physical qu…
▽ More
The detection of Earth-like planets with the radial-velocity method is currently limited by the presence of stellar activity signatures. On rotational timescales, spots and plages (or faculae) are known to introduce different RV signals, but their corrections require better activity proxies. The best-known chromospheric activity proxies in the visible are the Ca II H & K lines, but the physical quantities measured by their profiles need to be clarified. We first investigate resolved images of the Sun in order to better understand the spectrum of plages, spots, and the network using the Meudon spectroheliogram. We show that distinct line profiles are produced by plages, spots, and by the network component and we also derived the center-to-limb variations of the three profiles. Some care is required to disentangle their contributions due to their similarities. By combining disk-integrated spectra from the ISS high-resolution spectrograph with SDO direct images of the Sun, we managed to extract a high-resolution emission spectrum of the different components, which tend to confirm the spectra extracted from the Meudon spectroheliogram datacubes. Similar results were obtained with the HARPS-N Sun-as-a-star spectra. We concluded using a three-component model that the temporal variation of the popular S-index contains, on average for the 24th solar cycle: 70 +/- 12% of plage, 26 +/- 12% of network and 4 +/- 4% of spots. This preliminary investigation suggests that a detailed study of the Ca II H & K profiles may provide rich information about the filling factor and distribution of different types of active regions.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Why every observatory needs a disco ball
Authors:
Robert J. Cumming,
Alexander G. M. Pietrow,
Livia Pietrow,
Maria Cavallius,
Dominique Petit dit de la Roche,
Casper Pietrow,
Ilane Schroetter,
Moa Skan
Abstract:
Commercial disco balls provide a safe, effective and instructive way of observing the Sun. We explore the optics of solar projections with disco balls, and find that while sunspot observations are challenging, the solar disk and its changes during eclipses are easy and fun to observe. We explore the disco ball's potential for observing the moon and other bright astronomical phenomena.
Commercial disco balls provide a safe, effective and instructive way of observing the Sun. We explore the optics of solar projections with disco balls, and find that while sunspot observations are challenging, the solar disk and its changes during eclipses are easy and fun to observe. We explore the disco ball's potential for observing the moon and other bright astronomical phenomena.
△ Less
Submitted 27 September, 2023; v1 submitted 25 September, 2023;
originally announced September 2023.
-
A comparative study of two X2.2 and X9.3 solar flares observed with HARPS-N: Reconciling Sun-as-a-star spectroscopy and high-spatial resolution solar observations in the context of the solar-stellar connection
Authors:
A. G. M. Pietrow,
M. Cretignier,
M. K. Druett,
J. D. Alvarado-Gómez,
S. J. Hofmeister,
M. Verma,
R. Kamlah,
M. Baratella,
E. M. Amazo-Gomez,
I. Kontogiannis,
E. Dineva,
A. Warmuth,
C. Denker,
K. Poppenhaeger,
O. Andriienko,
X. Dumusque,
M. G. Löfdahl
Abstract:
Stellar flares cannot be spatially resolved, which complicates ascertaining the physical processes behind particular spectral signatures. Due to their proximity to Earth, solar flares can serve as a stepping stone for understanding their stellar counterparts, especially when using a Sun-as-a-star instrument and in combination with spatially resolved observations. We aim to understand the disk-inte…
▽ More
Stellar flares cannot be spatially resolved, which complicates ascertaining the physical processes behind particular spectral signatures. Due to their proximity to Earth, solar flares can serve as a stepping stone for understanding their stellar counterparts, especially when using a Sun-as-a-star instrument and in combination with spatially resolved observations. We aim to understand the disk-integrated spectral behaviors of a confined X2.2 solar flare and its eruptive X9.3 successor as measured by HARPS-N. The behavior of multiple photospheric and chromospheric spectral lines are investigated by means of activity indices and contrast profiles. A number of different photospheric lines were also investigated by means of equivalent widths, and radial velocity measures, which are then related to physical processes directly observed in high-resolution observations made with the Swedish 1-meter Solar Telescope and SDO Our findings suggest a relationship between the evolving shapes of contrast profile time and the flare locations, which assists in constraining flare locations in disk-integrated observations. In addition, an upward bias was found in flare statistics based on activity indices derived from the Ca II H & K lines. In this case, much smaller flares cause a similar increase in the activity index as that produced by larger flares. H$α$-based activity indices do not show this bias and are therefore less susceptible to activity jitter. Sodium line profiles show a strongly asymmetric response during flare activity, which is best captured with a newly defined asymmetrical sodium activity index. A strong flare response was detected in Mn I line profiles, which is unexpected and calls for further exploration. Intensity increases in H$α$, H$β$, and certain spectral windows of AIA before the flare onset suggest their potential use as short-term flare predictors.
△ Less
Submitted 1 February, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Solar oxygen abundance using SST/CRISP center-to-limb observations of the O I 7772 Å line
Authors:
A. G. M. Pietrow,
R. Hoppe,
M. Bergemann,
F. Calvo
Abstract:
Solar oxygen abundance measurements based on the O I near-infrared triplet have been a much-debated subject for several decades since non-local thermodynamic equilibrium (NLTE) calculations with 3D radiation-hydrodynamics model atmospheres introduced a large change to the 1D LTE modelling. In this work, we aim to test solar line formation across the solar disk using new observations obtained with…
▽ More
Solar oxygen abundance measurements based on the O I near-infrared triplet have been a much-debated subject for several decades since non-local thermodynamic equilibrium (NLTE) calculations with 3D radiation-hydrodynamics model atmospheres introduced a large change to the 1D LTE modelling. In this work, we aim to test solar line formation across the solar disk using new observations obtained with the SST/CRISP instrument. The observed dataset is based on a spectroscopic mosaic stretching from disk center to the solar limb. By comparing the state-of-the-art 3D NLTE models with the data, we find that the 3D NLTE models provide an excellent description of line formation across the disk. We obtain an abundance value of $A(\mathrm{O}) = (8.73 \pm 0.03)$ dex, with a very small angular dispersion across the disk. We conclude that spectroscopic mosaics are excellent probes for geometric and physical properties of hydrodynamics models and non-LTE line formation.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Center-to-limb variation of spectral lines and continua observed with SST/CRISP and SST/CHROMIS
Authors:
A. G. M. Pietrow,
D. Kiselman,
O. Andriienko,
D. J. M. Petit dit de la Roche,
C. J. Díaz Baso,
F. Calvo
Abstract:
Observations of center-to-limb variations (CLV) of spectral lines and continua provide a good test for the accuracy of models of solar and stellar atmospheric structure and spectral-line formation. They are also widely used to constrain elemental abundances and are becoming increasingly important in atmospheric studies of exoplanets. However, only a few such data sets exist for chromospheric lines…
▽ More
Observations of center-to-limb variations (CLV) of spectral lines and continua provide a good test for the accuracy of models of solar and stellar atmospheric structure and spectral-line formation. They are also widely used to constrain elemental abundances and are becoming increasingly important in atmospheric studies of exoplanets. However, only a few such data sets exist for chromospheric lines. We aim to create a set of standard profiles by means of mosaics made with the CRISP and CHROMIS instruments of the Swedish 1-m Solar Telescope (SST), as well as to explore the robustness of said profiles obtained using this method. For each spectral line we use a mosaic that ranges from the center to the limb. Each of these mosaics are averaged down to 50 individual spectral profiles, spaced by 0.02 in the $μ$ scale. These profiles are corrected for p-mode oscillations, and their line parameters (equivalent width, line shift, full-width at half-maximum, and line depth) are then compared against literature values where possible. We present a set of 50 average profiles that are spaced equidistantly along the cosine of the heliocentric angle ($μ$) by steps of 0.02 for five continuum points between 4001 and 7772 Å, as well as ten of the most commonly observed spectral lines at the SST (Ca II H & K, H$β$, Mg I 5173 Å, C I 5380 Å, Fe I 6173 Å, Fe I 6301 Å, H$α$, O I 7772 Å, and Ca II 8542 Å). Center-to-limb variation of line profiles and continua are shared in the CDS as machine-readable tables; providing a quantitative constraint on theoretical models that aim to model stellar atmospheres.
△ Less
Submitted 19 March, 2023; v1 submitted 7 December, 2022;
originally announced December 2022.
-
COCOPLOT: COlor COllapsed PLOTting software : Using color to view 3D data as a 2D image
Authors:
Malcolm K. Druett,
Alexander G. M. Pietrow,
Gregal J. M. Vissers,
Carolina Robustini,
Flavio Calvo
Abstract:
Most modern solar observatories deliver data products formatted as 3D spatio-temporal data cubes, that contain additional, higher dimensions with spectral and/or polarimetric information. This multi-dimensional complexity presents a major challenge when browsing for features of interest in several dimensions simultaneously. We developed the COlor COllapsed PLOTting (COCOPLOT) software as a quick-l…
▽ More
Most modern solar observatories deliver data products formatted as 3D spatio-temporal data cubes, that contain additional, higher dimensions with spectral and/or polarimetric information. This multi-dimensional complexity presents a major challenge when browsing for features of interest in several dimensions simultaneously. We developed the COlor COllapsed PLOTting (COCOPLOT) software as a quick-look and context image software, to convey spectral profile or time evolution from all the spatial pixels ($x,y$) in a 3D [$n_x,n_y,n_λ$] or [$n_x,n_y,n_t$] data cube as a single image, using color. This can avoid the need to scan through many wavelengths, creating difference and composite images when searching for signals satisfying multiple criteria. Filters are generated for the red, green, and blue channels by selecting values of interest to highlight in each channel, and their weightings. These filters are combined with the data cube over the third dimension axis to produce an $n_x \times n_y \times 3$ cube displayed as one true color image. Some use cases are presented for data from the Swedish 1-m Solar Telescope (SST) and IRIS, including H$α$ solar flare data, a comparison with $k$-means clustering for identifying asymmetries in the Ca II K line and off-limb coronal rain in IRIS C II slit-jaw images. These illustrate identification by color alone using COCOPLOT of locations including line wing or central enhancement, broadening, wing absorption, and sites with intermittent flows or time-persistent features. COCOPLOT is publicly available in both IDL and Python.
△ Less
Submitted 31 July, 2022; v1 submitted 21 November, 2021;
originally announced November 2021.
-
Physical properties of a fan-shaped jet backlit by an X9.3 flare
Authors:
A. G. M. Pietrow,
M. Druett,
J. de la Cruz Rodriguez,
F. Calvo,
D. Kiselman
Abstract:
Fan-shaped jets can be observed above light bridges and are driven by reconnection of the vertical umbral field with the more horizontal field above the light bridges. Because these jets are not fully opaque in chromospheric lines, one cannot study their spectra without the highly complex considerations of radiative transfer in spectral lines from the atmosphere behind the fan. We get around this…
▽ More
Fan-shaped jets can be observed above light bridges and are driven by reconnection of the vertical umbral field with the more horizontal field above the light bridges. Because these jets are not fully opaque in chromospheric lines, one cannot study their spectra without the highly complex considerations of radiative transfer in spectral lines from the atmosphere behind the fan. We get around this by taking advantage of a unique set of observations of the H$α$ line along with the Ca II 8542 and Ca II K lines obtained with the Swedish 1-m Solar Telescope where a fan-shaped jet was backlit by an X9.3 flare. The H$α$ flare ribbon emission profiles from behind the fan are highly broadened and flattened, allowing us to investigate the fan as if it were backlit by continuous emission. Using this model we derived the opacity and velocity of the material in the jet and what we believe to be the first observationally derived estimate of the mass and density of material in a fan-shaped jet. Using inversions of Ca II 8542 emission via STiC, we were also able to estimate the temperature in the jet. Finally, we use the masses and POS and LOS velocities as functions of time to investigate the downward supply of energy and momentum to the photosphere in the collapse of this jet, and evaluate it as a potential driver for a sunquake beneath. We found that the physical properties of the fan material are reasonably chromospheric in nature, with a temperature of 7050 $\pm$ 250 K and a mean density of 2 $\pm$ 0.3 $\times$ 10$^{-11}$ g cm$^{-3}$. The total mass observed in $\mathrm{Hα}$ was found to be 3.9 $\pm$ 0.7 $\times$ 10$^{13}$g and the kinetic energy delivered to the base of the fan in its collapse was nearly two orders of magnitude below typical sunquake energies. We therefore rule out this jet as the sunquake driver, but cannot completely rule out larger fan jets as potential drivers.
△ Less
Submitted 26 November, 2021; v1 submitted 20 October, 2021;
originally announced October 2021.
-
Towards a physical understanding of the thermal background in large ground-based telescopes
Authors:
Leonard Burtscher,
Ioannis Politopoulos,
Sergio Fernández-Acosta,
Tibor Agocs,
Mario van den Ancker,
Roy van Boekel,
Bernhard Brandl,
Hans Ulrich Käufl,
Eric Pantin,
Alex G. M. Pietrow,
Ralf Siebenmorgen,
Remko Stuik,
Konrad R. W. Tristram,
Willem-Jan de Wit
Abstract:
Ground-based thermal-infrared observations have a unique scientific potential, but are also extremely challenging due to the need to accurately subtract the high thermal background. Since the established techniques of chopping and nodding need to be modified for observations with the future mid-infrared ELT imager and spectrograph (METIS), we investigate the sources of thermal background subtracti…
▽ More
Ground-based thermal-infrared observations have a unique scientific potential, but are also extremely challenging due to the need to accurately subtract the high thermal background. Since the established techniques of chopping and nodding need to be modified for observations with the future mid-infrared ELT imager and spectrograph (METIS), we investigate the sources of thermal background subtraction residuals. Our aim is to either remove or at least minimise the need for nodding in order to increase the observing efficiency for METIS. To this end we need to improve our knowledge about the origin of chop residuals and devise observing methods to remove them most efficiently, i.e. with the slowest possible nodding frequency. Thanks to dedicated observations with VLT/VISIR and GranTeCan/CanariCam, we have successfully traced the origin of three kinds of chopping residuals to (1) the entrance window, (2) the spiders and (3) other warm emitters in the pupil, in particular the VLT M3 mirror cell in its parking position. We conclude that, in order to keep chopping residuals stable over a long time (and therefore allow for slower nodding cycles), the pupil illumination needs to be kept constant, i.e. (imaging) observations should be performed in pupil-stabilised, rather than field-stabilised mode, with image de-rotation in the post-processing pipeline. This is now foreseen as the default observing concept for all METIS imaging modes.
△ Less
Submitted 25 December, 2020;
originally announced December 2020.
-
Inference of the chromospheric magnetic field configuration of solar plage using the Ca II 8542 Å line
Authors:
A. G. M. Pietrow,
D. Kiselman,
J. de la Cruz Rodríguez,
C. J. Díaz Baso,
A. Pastor Yabar,
R. Yadav
Abstract:
It has so far proven impossible to reproduce all aspects of the solar plage chromosphere in quasi-realistic numerical models. The magnetic field configuration in the lower atmosphere is one of the few free parameters in such simulations. The literature only offers proxy-based estimates of the field strength, as it is difficult to obtain observational constraints in this region. Sufficiently sensit…
▽ More
It has so far proven impossible to reproduce all aspects of the solar plage chromosphere in quasi-realistic numerical models. The magnetic field configuration in the lower atmosphere is one of the few free parameters in such simulations. The literature only offers proxy-based estimates of the field strength, as it is difficult to obtain observational constraints in this region. Sufficiently sensitive spectro-polarimetric measurements require a high signal-to-noise ratio, spectral resolution, and cadence, which are at the limit of current capabilities. We use critically sampled spectro-polarimetric observations of the \cair line obtained with the CRISP instrument of the Swedish 1-m Solar Telescope to study the strength and inclination of the chromospheric magnetic field of a plage region. This will provide direct physics-based estimates of these values, which could aid modelers to put constraints on plage models. We increased the signal-to-noise ratio of the data by applying several methods including deep learning and PCA. We estimated the noise level to be $1\cdot10^{-3} I_c$. We then used STiC, a non-local thermodynamic equilibrium (NLTE) inversion code to infer the atmospheric structure and magnetic field pixel by pixel. We are able to infer the magnetic field strength and inclination for a plage region and for fibrils in the surrounding canopy. In the plage we report an absolute field strength of $|B| =440 \pm 90$ G, with an inclination of $10^\circ \pm 16^\circ$ with respect to the local vertical. This value for $|B|$ is roughly double of what was reported previously, while the inclination matches previous studies done in the photosphere. In the fibrillar region we found $|B| = 300 \pm 50$ G, with an inclination of $50^\circ \pm 13^\circ$.
△ Less
Submitted 16 October, 2020; v1 submitted 25 June, 2020;
originally announced June 2020.
-
Inverse Chop Addition: Thermal IR background subtraction without Nodding
Authors:
A. G. M. Pietrow,
L. Burtscher,
B. Brandl
Abstract:
Due to the large size and mass of the secondary mirror on next generation extremely large telescopes it will not be possible to provide classical chopping and nodding as is used during mid-IR observations today. As a solution to this we propose an alternative approach to thermal background reduction called `inverse chop addition`. Here we use the symmetries of the thermal background to replace nod…
▽ More
Due to the large size and mass of the secondary mirror on next generation extremely large telescopes it will not be possible to provide classical chopping and nodding as is used during mid-IR observations today. As a solution to this we propose an alternative approach to thermal background reduction called `inverse chop addition`. Here we use the symmetries of the thermal background to replace nodding, which allows us to get nearly identical background reductions while only using a special chopping pattern. The performance of this method was tested during technical time observations on VLT/VISIR. With this method, a higher observational efficiency can be obtained than with `classical chopping and nodding`, while achieving equally good reduction results. These results suggest that `inverse-chop addition` could be a good alternative for classical chopping and nodding on both current and next generation ground-based facilities.
△ Less
Submitted 13 March, 2019;
originally announced March 2019.
-
The coronagraphic Modal Wavefront Sensor: a hybrid focal-plane sensor for the high-contrast imaging of circumstellar environments
Authors:
Michael J. Wilby,
Christoph U. Keller,
Frans Snik,
Visa Korkiakoski,
Alexander G. M. Pietrow
Abstract:
The raw coronagraphic performance of current high-contrast imaging instruments is limited by the presence of a quasi-static speckle (QSS) background, resulting from instrumental non-common path errors (NCPEs). Rapid development of efficient speckle subtraction techniques in data reduction has enabled final contrasts of up to 10-6 to be obtained, however it remains preferable to eliminate the under…
▽ More
The raw coronagraphic performance of current high-contrast imaging instruments is limited by the presence of a quasi-static speckle (QSS) background, resulting from instrumental non-common path errors (NCPEs). Rapid development of efficient speckle subtraction techniques in data reduction has enabled final contrasts of up to 10-6 to be obtained, however it remains preferable to eliminate the underlying NCPEs at the source. In this work we introduce the coronagraphic Modal Wavefront Sensor (cMWS), a new wavefront sensor suitable for real-time NCPE correction. This pupil-plane optic combines the apodizing phase plate coronagraph with a holographic modal wavefront sensor, to provide simultaneous coronagraphic imaging and focal-plane wavefront sensing using the science point spread function. We first characterise the baseline performance of the cMWS via idealised closed-loop simulations, showing that the sensor successfully recovers diffraction-limited coronagraph performance over an effective dynamic range of +/-2.5 radians root-mean-square (RMS) wavefront error within 2-10 iterations. We then present the results of initial on-sky testing at the William Herschel Telescope, and demonstrate that the sensor is able to retrieve injected wavefront aberrations to an accuracy of 10nm RMS under realistic seeing conditions. We also find that the cMWS is capable of real-time broadband measurement of atmospheric wavefront variance at a cadence of 50Hz across an uncorrected telescope sub-aperture. When combined with a suitable closed-loop adaptive optics system, the cMWS holds the potential to deliver an improvement in raw contrast of up to two orders of magnitude over the uncorrected QSS floor. Such a sensor would be eminently suitable for the direct imaging and spectroscopy of exoplanets with both existing and future instruments, including EPICS and METIS for the E-ELT.
△ Less
Submitted 13 October, 2016;
originally announced October 2016.