-
Land Fraction Diversity on Earth-like Planets and Implications for their Habitability
Authors:
Dennis Höning,
Tilman Spohn
Abstract:
A balanced ratio of ocean to land is believed to be essential for an Earth-like biosphere and one may conjecture that plate-tectonics planets should be similar in geological properties. After all, the volume of continental crust evolves towards an equilibrium between production and erosion. If the interior thermal states of Earth-sized exoplanets are similar to the Earth's, one might expect a simi…
▽ More
A balanced ratio of ocean to land is believed to be essential for an Earth-like biosphere and one may conjecture that plate-tectonics planets should be similar in geological properties. After all, the volume of continental crust evolves towards an equilibrium between production and erosion. If the interior thermal states of Earth-sized exoplanets are similar to the Earth's, one might expect a similar equilibrium between continental production and erosion to establish and, hence, a similar land fraction. We will show that this conjecture is not likely to be true. Positive feedback associated with the coupled mantle water - continental crust cycle may rather lead to a manifold of three possible planets, depending on their early history: a land planet, an ocean planet and a balanced Earth-like planet. In addition, thermal blanketing of the interior by the continents enhances the sensitivity of continental growth to its history and, eventually, to initial conditions. Much of the blanketing effect is however compensated by mantle depletion in radioactive elements. A model of the long-term carbonate-silicate cycle shows the land and the ocean planet to differ by about 5 K in average surface temperature. A larger continental surface fraction results both in higher weathering rates and enhanced outgassing, partly compensating each other. Still, the land planet is expected to have a substantially dryer, colder and harsher climate possibly with extended cold deserts in comparison with the ocean planet and with the present-day Earth. Using a model of balancing water availability and nutrients from continental crust weathering, we find the bioproductivity and the biomass of both the land and ocean planet to be reduced by a third to half of Earth's. The biosphere on these planets might not be substantial enough to produce a supply of free oxygen.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
Planetary Exploration Horizon 2061 Report, Chapter 3: From science questions to Solar System exploration
Authors:
Véronique Dehant,
Michel Blanc,
Steve Mackwell,
Krista M. Soderlund,
Pierre Beck,
Emma Bunce,
Sébastien Charnoz,
Bernard Foing,
Valerio Filice,
Leigh N. Fletcher,
François Forget,
Léa Griton,
Heidi Hammel,
Dennis Höning,
Takeshi Imamura,
Caitriona Jackman,
Yohai Kaspi,
Oleg Korablev,
Jérémy Leconte,
Emmanuel Lellouch,
Bernard Marty,
Nicolas Mangold,
Patrick Michel,
Alessandro Morbidelli,
Olivier Mousis
, et al. (9 additional authors not shown)
Abstract:
This chapter of the Planetary Exploration Horizon 2061 Report reviews the way the six key questions about planetary systems, from their origins to the way they work and their habitability, identified in chapter 1, can be addressed by means of solar system exploration, and how one can find partial answers to these six questions by flying to the different provinces to the solar system: terrestrial p…
▽ More
This chapter of the Planetary Exploration Horizon 2061 Report reviews the way the six key questions about planetary systems, from their origins to the way they work and their habitability, identified in chapter 1, can be addressed by means of solar system exploration, and how one can find partial answers to these six questions by flying to the different provinces to the solar system: terrestrial planets, giant planets, small bodies, and up to its interface with the local interstellar medium. It derives from this analysis a synthetic description of the most important space observations to be performed at the different solar system objects by future planetary exploration missions. These observation requirements illustrate the diversity of measurement techniques to be used as well as the diversity of destinations where these observations must be made. They constitute the base for the identification of the future planetary missions we need to fly by 2061, which are described in chapter 4. Q1- How well do we understand the diversity of planetary systems objects? Q2- How well do we understand the diversity of planetary system architectures? Q3- What are the origins and formation scenarios for planetary systems? Q4- How do planetary systems work? Q5- Do planetary systems host potential habitats? Q6- Where and how to search for life?
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
The InSight HP$^3$ Penetrator (Mole) on Mars: Soil Properties Derived From the Penetration Attempts and Related Activities
Authors:
T. Spohn,
T. L. Hudson,
E. Marteau,
M. Golombek,
M. Grott,
T. Wippermann,
K. S. Ali,
C. Schmelzbach,
S. Kedar,
K. Hurst,
A. Trebi-Ollennu,
V. Ansan,
J. Garvin,
J. Knollenberg,
N. Mueller,
S. Piqeux,
R. Lichtenheldt,
C. Krause,
C. Fantinati,
N. Brinkman,
D. Sollberger,
P. Delage,
C. Vrettos,
S. Reershemius,
L. Wisniewski
, et al. (9 additional authors not shown)
Abstract:
The NASA InSight Lander on Mars includes the Heat Flow and Physical Properties Package HP$^3$ to measure the surface heat flow of the planet. The package uses temperature sensors that would have been brought to the target depth of 3--5 m by a small penetrator, nicknamed the mole. The mole requiring friction on its hull to balance remaining recoil from its hammer mechanism did not penetrate to the…
▽ More
The NASA InSight Lander on Mars includes the Heat Flow and Physical Properties Package HP$^3$ to measure the surface heat flow of the planet. The package uses temperature sensors that would have been brought to the target depth of 3--5 m by a small penetrator, nicknamed the mole. The mole requiring friction on its hull to balance remaining recoil from its hammer mechanism did not penetrate to the targeted depth. Instead, by precessing about a point midway along its hull, it carved a 7 cm deep and 5-6 cm wide pit and reached a depth of initially 31 cm. The root cause of the failure - as was determined through an extensive, almost two years long campaign - was a lack of friction in an unexpectedly thick cohesive duricrust. During the campaign -- described in detail in this paper -- the mole penetrated further aided by friction applied using the scoop at the end of the robotic Instrument Deployment Arm and by direct support by the latter. The mole finally reached a depth of 40 cm, bringing the mole body 1--2 cm below the surface. The penetration record of the mole and its thermal sensors were used to measure thermal and mechanical soil parameters such as the thermal conductivity and the penetration resistance of the duricrust and its cohesion. The hammerings of the mole were recorded by the seismometer SEIS and the signals could be used to derive a P-wave velocity and a S-wave velocity and elastic moduli representative of the topmost tens of cm of the regolith. The combined data were used to derive a model of the regolith that has an about 20 cm thick duricrust underneath a 1 cm thick unconsolidated layer of sand mixed with dust and above another 10 cm of unconsolidated sand. Underneath the latter, a layer more resistant to penetration and possibly consisting of debris from a small impact crater is inferred.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
The InSight HP$^3$ mole on Mars: Lessons learned from attempts to penetrate to depth in the Martian soil
Authors:
T. Spohn,
T. L. Hudson,
L. Witte,
T. Wippermann,
L. Wisniewski,
B. Kediziora,
C. Vrettos,
R. D. Lorenz,
M. Golombek,
R. Lichtenfeld,
M. Grott,
J. Knollenberg,
C. Krause,
C. Fantinati,
S. Nagihara,
J. Grygorczuk
Abstract:
The NASA InSight mission payload includes the Heat Flow and Physical Properties Package HP$^3$ to measure the surface heat flow. The package was designed to use a small penetrator -- nicknamed the mole -- to implement a string of temperature sensors in the soil to a depth of 5m. The mole itself is equipped with sensors to measure a thermal conductivity as it proceeds to depth. The heat flow would…
▽ More
The NASA InSight mission payload includes the Heat Flow and Physical Properties Package HP$^3$ to measure the surface heat flow. The package was designed to use a small penetrator -- nicknamed the mole -- to implement a string of temperature sensors in the soil to a depth of 5m. The mole itself is equipped with sensors to measure a thermal conductivity as it proceeds to depth. The heat flow would be calculated from the product of the temperature gradient and the thermal conductivity. To avoid the perturbation caused by annual surface temperature variations, the measurements would be taken at a depth between 3 m and 5 m. The mole was designed to penetrate cohesionless soil similar to Quartz sand which was expected to provide a good analogue material for Martian sand. The sand would provide friction to the buried mole hull to balance the remaining recoil of the mole hammer mechanism that drives the mole forward. Unfortunately, the mole did not penetrate more than a mole length of 40 cm. The failure to penetrate deeper was largely due to a few tens of centimeter thick cohesive duricrust that failed to provide the required friction. Although a suppressor mass and spring in the hammer mechanism absorbed much of the recoil, the available mass did not allow a system that would have eliminated the recoil. The mole penetrated to 40 cm depth benefiting from friction provided by springs in the support structure from which it was deployed. It was found in addition that the Martian soil provided unexpected levels of penetration resistance that would have motivated to designing a more powerful mole. It is concluded that more mass would have allowed to design a more robust system with little or no recoil, more energy of the mole hammer mechanism and a more massive support structure.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
Potential Effects of Atmospheric Collapse on Martian Heat Flow and Application to the InSight Measurements
Authors:
Nicholas Attree,
Narissa Patel,
Axel Hagermann,
Matthias Grott,
Tilman Spohn,
Matthew Siegler
Abstract:
Heat flow is an important constraint on planetary formation and evolution. It has been suggested that Martian obliquity cycles might cause periodic collapses in atmospheric pressure, leading to corresponding decreases in regolith thermal conductivity (which is controlled by gas in the pore spaces). Geothermal heat would then build up in the subsurface, potentially affecting present-day heat flow -…
▽ More
Heat flow is an important constraint on planetary formation and evolution. It has been suggested that Martian obliquity cycles might cause periodic collapses in atmospheric pressure, leading to corresponding decreases in regolith thermal conductivity (which is controlled by gas in the pore spaces). Geothermal heat would then build up in the subsurface, potentially affecting present-day heat flow - and thus the measurements made by a heat-flow probe such as the InSight HP$^{3}$ instrument. To gauge the order of magnitude of this effect, we model the diffusion of a putative heat pulse caused by thermal conductivity changes with a simple numerical scheme and compare it to the heat-flow perturbations caused by other effects. We find that an atmospheric collapse to 300 Pa in the last 40 kyr would lead to a present-day heat flow that is up to $2-8\%$ larger than the average geothermal background. Considering the InSight mission with expected $5-15\%$ error bars on the HP$^{3}$ measurement, this perturbation would only be significant in the best-case scenario of full instrument deployment, completed measurement campaign, and a well-modelled surface configuration. The prospects for detecting long-term climate perturbations via spacecraft heat-flow experiments remain challenging.
△ Less
Submitted 10 October, 2019;
originally announced October 2019.
-
Geoscience for understanding habitability in the solar system and beyond
Authors:
Veronique Dehant,
Vinciane Debaille,
Vera Dobos,
Fabrice Gaillard,
Cedric Gillmann,
Steven Goderis,
John Lee Grenfell,
Dennis Höning,
Emmanuelle J. Javaux,
Özgür Karatekin,
Alessandro Morbidelli,
Lena Noack,
Heike Rauer,
Manuel Scherf,
Tilman Spohn,
Paul Tackley,
Tim Van Hoolst,
Kai Wünnemann
Abstract:
This paper reviews habitability conditions for a terrestrial planet from the point of view of geosciences. It addresses how interactions between the interior of a planet or a moon and its atmosphere and surface (including hydrosphere and biosphere) can affect habitability of the celestial body. It does not consider in detail the role of the central star but focusses more on surface conditions capa…
▽ More
This paper reviews habitability conditions for a terrestrial planet from the point of view of geosciences. It addresses how interactions between the interior of a planet or a moon and its atmosphere and surface (including hydrosphere and biosphere) can affect habitability of the celestial body. It does not consider in detail the role of the central star but focusses more on surface conditions capable of sustaining life. We deal with fundamental issues of planetary habitability, i.e. the environmental conditions capable of sustaining life, and the above-mentioned interactions can affect the habitability of the celestial body. We address some hotly debated questions including: - How do core and mantle affect the evolution and habitability of planets? - What are the consequences of mantle overturn on the evolution of the interior and atmosphere? - What is the role of the global carbon and water cycles? - What influence do comet and asteroid impacts exert on the evolution of the planet? - How does life interact with the evolution of the Earth's geosphere and atmosphere? - How can knowledge of the solar system geophysics and habitability be applied to exoplanets? In addition, we address the identification of preserved life tracers in the context of the interaction of life with planetary evolution.
△ Less
Submitted 1 September, 2019;
originally announced September 2019.
-
Carbon cycling and interior evolution of water-covered plate tectonics and stagnant lid planets
Authors:
Dennis Höning,
Nicola Tosi,
Tilman Spohn
Abstract:
Aims: The long-term carbon cycle for planets with a surface entirely covered by oceans works differently from that of the present-day Earth because inefficient erosion leads to a strong dependence of the weathering rate on the rate of volcanism. In this paper, we investigate the long-term carbon cycle for these planets throughout their evolution. Methods: We built box models of the long-term carbo…
▽ More
Aims: The long-term carbon cycle for planets with a surface entirely covered by oceans works differently from that of the present-day Earth because inefficient erosion leads to a strong dependence of the weathering rate on the rate of volcanism. In this paper, we investigate the long-term carbon cycle for these planets throughout their evolution. Methods: We built box models of the long-term carbon cycle based on CO$_2$ degassing, seafloor-weathering, metamorphic decarbonation, and ingassing and coupled them with thermal evolution models of stagnant lid and plate tectonics planets. Results: The assumed relationship between the seafloor-weathering rate and the atmospheric CO$_2$ or the surface temperature strongly influences the climate evolution for both tectonic regimes. For a plate tectonics planet, the atmospheric CO$_2$ partial pressure is characterised by an equilibrium between ingassing and degassing and depends on the temperature gradient in subduction zones affecting the stability of carbonates. For a stagnant lid planet, partial melting and degassing are always accompanied by decarbonation, such that the combined carbon content of the crust and atmosphere increases with time. Whereas the initial mantle temperature for plate tectonics planets only affects the early evolution, it influences the evolution of the surface temperature of stagnant lid planets for much longer. Conclusions: For both tectonic regimes, mantle cooling results in a decreasing atmospheric CO$_2$ partial pressure. For a plate tectonics planet this is caused by an increasing fraction of subduction zones that avoid crustal decarbonation, and for stagnant lid planets this is caused by an increasing decarbonation depth. This mechanism may partly compensate for the increase of the surface temperature due to increasing solar luminosity with time and hereby contribute to keep planets habitable in the long-term.
△ Less
Submitted 29 May, 2019;
originally announced May 2019.
-
Retrieval of the fluid Love number $k_2$ in exoplanetary transit curves
Authors:
Hugo Hellard,
Szilárd Csizmadia,
Sebastiano Padovan,
Heike Rauer,
Juan Cabrera,
Frank Sohl,
Tilman Spohn,
Doris Breuer
Abstract:
We are witness to a great and increasing interest in internal structure, composition and evolution of exoplanets. However, direct measurements of exoplanetary mass and radius cannot be uniquely interpreted in terms of interior structure, justifying the need for an additional observable. The second degree fluid Love number, $k_2$, is proportional to the concentration of mass towards the body's cent…
▽ More
We are witness to a great and increasing interest in internal structure, composition and evolution of exoplanets. However, direct measurements of exoplanetary mass and radius cannot be uniquely interpreted in terms of interior structure, justifying the need for an additional observable. The second degree fluid Love number, $k_2$, is proportional to the concentration of mass towards the body's center, hence providing valuable additional information about the internal structure. When hydrostatic equilibrium is assumed for the planetary interior, $k_2$ is a direct function of the planetary shape. Previous attempts were made to link the observed tidally and rotationally induced planetary oblateness in photometric light curves to $k_2$ using ellipsoidal shape models. Here, we construct an analytical 3D shape model function of the true planetary mean radius, that properly accounts for tidal and rotational deformations. Measuring the true planetary mean radius is critical when one wishes to compare the measured $k_2$ to interior theoretical expectations. We illustrate the feasibility of our method and show, by applying a Differential Evolution Markov Chain to synthetic data of WASP-121b, that a precision $\leq$ 65 ppm/$\sqrt{2\,min}$ is required to reliably retrieve $k_2$ with present understanding of stellar limb darkening, therefore improving recent results based on ellipsoidal shape models. Any improvement on stellar limb darkening would increase such performance.
△ Less
Submitted 8 May, 2019;
originally announced May 2019.
-
The thermal, mechanical, structural, and dielectric properties of cometary nuclei after Rosetta
Authors:
O. Groussin,
N. Attree,
Y. Brouet,
V. Ciarletti,
B. Davidsson,
G. Filacchione,
H. H. Fischer,
B. Gundlach,
M. Knapmeyer,
J. Knollenberg,
R. Kokotanekova,
E. Kührt,
C. Leyrat,
D. Marshall,
I. Pelivan,
Y. Skorov,
C. Snodgrass,
T. Spohn,
F. Tosi
Abstract:
The physical properties of cometary nuclei observed today relate to their complex history and help to constrain their formation and evolution. In this article, we review some of the main physical properties of cometary nuclei and focus in particular on the thermal, mechanical, structural and dielectric properties, emphasizing the progress made during the Rosetta mission. Comets have a low density…
▽ More
The physical properties of cometary nuclei observed today relate to their complex history and help to constrain their formation and evolution. In this article, we review some of the main physical properties of cometary nuclei and focus in particular on the thermal, mechanical, structural and dielectric properties, emphasizing the progress made during the Rosetta mission. Comets have a low density of 480 $\pm$ 220 kg m-3 and a low permittivity of 1.9 - 2.0, consistent with a high porosity of 70 - 80 %, are weak with a very low global tensile strength $<$100 Pa, and have a low bulk thermal inertia of 0 - 60 J K-1 m-2 s-1/2 that allowed them to preserve highly volatiles species (e.g. CO, CO2, CH4, N2) into their interior since their formation. As revealed by 67P/Churyumov-Gerasimenko, the above physical properties vary across the nucleus, spatially at its surface but also with depth. The broad picture is that the bulk of the nucleus consists of a weakly bonded, rather homogeneous material that preserved primordial properties under a thin shell of processed material, and possibly covered by a granular material; this cover might in places reach a thickness of several meters. The properties of the top layer (the first meter) are not representative of that of the bulk nucleus. More globally, strong nucleus heterogeneities at a scale of a few meters are ruled out on 67P small lobe.
△ Less
Submitted 3 May, 2019;
originally announced May 2019.
-
The habitability of stagnant-lid Earths around dwarf stars
Authors:
Mareike Godolt,
Nicola Tosi,
Barbara Stracke,
J. Lee Grenfell,
Thomas Ruedas,
Tilman Spohn,
Heike Rauer
Abstract:
The habitability of a planet depends on various factors, such as delivery of water during the formation, the co-evolution of the interior and the atmosphere, as well as the stellar irradiation which changes in time. Since an unknown number of rocky exoplanets may operate in a one-plate convective regime, i.e., without plate tectonics, we aim at understanding under which conditions planets in such…
▽ More
The habitability of a planet depends on various factors, such as delivery of water during the formation, the co-evolution of the interior and the atmosphere, as well as the stellar irradiation which changes in time. Since an unknown number of rocky exoplanets may operate in a one-plate convective regime, i.e., without plate tectonics, we aim at understanding under which conditions planets in such a stagnant-lid regime may support habitable surface conditions. Understanding the interaction of the planetary interior and outgassing of volatiles with the atmosphere in combination with the evolution of the host star is crucial to determine the potential habitability. M-dwarf stars in particular possess a high-luminosity pre-main sequence phase which endangers the habitability of planets around them via water loss. We therefore explore the potential of secondary outgassing from the planetary interior to rebuild a water reservoir allowing for habitability at a later stage. We compute the boundaries of the habitable zone around M, K, G, and F-dwarf stars using a 1D cloud-free radiative-convective climate model accounting for the outgassing history of CO2 and H2O from an interior evolution and outgassing model for different interior compositions and stellar luminosity evolutions. The outer edge of the habitable zone strongly depends on the amount of CO2 outgassed from the interior, while the inner edge is mainly determined via the stellar irradiation, as soon as a sufficiently large water reservoir has been outgassed. A build-up of a secondary water reservoir for planets around M-dwarf stars is possible even after severe water loss during the high luminosity pre-main sequence phase as long as some water has been retained within the mantle. Earth-like stagnant-lid planets allow for habitable surface conditions within a continuous habitable zone that is dependent on interior composition.
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
Bifurcation in the growth of continental crust
Authors:
Dennis Höning,
Nicola Tosi,
Hendrik Hansen-Goos,
Tilman Spohn
Abstract:
Is the present-day water-land ratio a necessary outcome of the evolution of plate tectonic planets with a similar age, volume, mass, and total water inventory as the Earth? This would be the case - largely independent of initial conditions - if Earth's present-day continental volume were at a stable unique equilibrium with strong self-regulating mechanisms of continental growth steering the evolut…
▽ More
Is the present-day water-land ratio a necessary outcome of the evolution of plate tectonic planets with a similar age, volume, mass, and total water inventory as the Earth? This would be the case - largely independent of initial conditions - if Earth's present-day continental volume were at a stable unique equilibrium with strong self-regulating mechanisms of continental growth steering the evolution to this state. In this paper, we question this conjecture. Instead we suggest that positive feedbacks in the plate tectonics model of continental production and erosion may dominate and show that such a model can explain the history of continental growth.
We investigate the main mechanisms that contribute to the growth of the volume of the continental crust. In particular, we analyze the effect of the oceanic plate speed, depending on the area and thickness of thermally insulating continents, on production and erosion mechanisms. Effects that cause larger continental production rates for larger values of continental volume are positive feedbacks. In contrast, negative feedbacks act to stabilize the continental volume. They are provided by the increase of the rate of surface erosion, subduction erosion, and crustal delamination with the continental volume. We systematically analyze the strengths of positive and negative feedback contributions to the growth of the continental crust. Although the strengths of some feedbacks depend on poorly known parameters, we conclude that a net predominance of positive feedbacks is plausible. We explore the effect of the combined feedback strength on the feasibility of modeling the observed small positive net continental growth rate over the past 2-3 billion years.
△ Less
Submitted 8 January, 2019;
originally announced January 2019.
-
What mechanisms dominate the activity of Geminid Parent (3200) Phaethon?
Authors:
LiangLiang Yu,
Wing-Huen Ip,
Tilman Spohn
Abstract:
A long-term sublimation model to explain how Phaethon could provide the Geminid stream is proposed. We find that it would take $\sim6$ Myr or more for Phaethon to lose all of its internal ice (if ever there was) in its present orbit. Thus, if the asteroid moved from the region of a 5:2 or 8:3 mean motion resonance with Jupiter to its present orbit less than $1$ Myr ago, it may have retained much o…
▽ More
A long-term sublimation model to explain how Phaethon could provide the Geminid stream is proposed. We find that it would take $\sim6$ Myr or more for Phaethon to lose all of its internal ice (if ever there was) in its present orbit. Thus, if the asteroid moved from the region of a 5:2 or 8:3 mean motion resonance with Jupiter to its present orbit less than $1$ Myr ago, it may have retained much of its primordial ice. The dust mantle on the sublimating body should have a thickness of at least $15$ m but the mantle could have been less than $1$ m thick $1000$ years ago. We find that the total gas production rate could have been as large as $10^{27}\rm~s^{-1}$ then, and the gas flow could have been capable of lifting dust particles of up to a few centimeters in size. Therefore, gas production during the past millennium could have been sufficient to blow away enough dust particles to explain the entire Geminid stream. For present-day Phaethon, the gas production is comparatively weak. But strong transient gas release with a rate of $\sim4.5\times10^{19}\rm~m^{-2}s^{-1}$ is expected for its south polar region when Phaethon moves from $0^\circ$ to $2^\circ$ mean anomaly near perihelion. Consequently, dust particles with radii of $<\sim260~μm$ can be blown away to form a dust tail. In addition, we find that the large surface temperature variation of $>600$ K near perihelion can generate sufficiently large thermal stress to cause fracture of rocks or boulders and provide an efficient mechanism to produce dust particles on the surface. The time scale for this process should be several times longer than the seasonal thermal cycle, thereby dominating the cycle of appearance of the dust tail.
△ Less
Submitted 2 November, 2018;
originally announced November 2018.
-
Matrix-propagator approach to compute fluid Love numbers and applicability to extrasolar planets
Authors:
S. Padovan,
T. Spohn,
P. Baumeister,
N. Tosi,
D. Breuer,
Sz. Csizmadia,
H. Hellard,
F. Sohl
Abstract:
Context. The mass and radius of a planet directly provide its bulk density, which can be interpreted in terms of its overall composition. Any measure of the radial mass distribution provides a first step in constraining the interior structure. The fluid Love number $k_2$ provides such a measure, and estimates of $k_2$ for extrasolar planets are expected to be available in the coming years thanks t…
▽ More
Context. The mass and radius of a planet directly provide its bulk density, which can be interpreted in terms of its overall composition. Any measure of the radial mass distribution provides a first step in constraining the interior structure. The fluid Love number $k_2$ provides such a measure, and estimates of $k_2$ for extrasolar planets are expected to be available in the coming years thanks to improved observational facilities and the ever-extending temporal baseline of extrasolar planet observations.
Aims. We derive a method for calculating the Love numbers $k_n$ of any object given its density profile, which is routinely calculated from interior structure codes.
Methods. We used the matrix-propagator technique, a method frequently used in the geophysical community.
Results. We detail the calculation and apply it to the case of GJ 436b, a classical example of the degeneracy of mass-radius relationships, to illustrate how measurements of $k_2$ can improve our understanding of the interior structure of extrasolar planets. We implemented the method in a code that is fast, freely available, and easy to combine with preexisting interior structure codes. While the linear approach presented here for the calculation of the Love numbers cannot treat the presence of nonlinear effects that may arise under certain dynamical conditions, it is applicable to close-in gaseous extrasolar planets like hot Jupiters, likely the first targets for which $k_2$ will be measured.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
The habitability of a stagnant-lid Earth
Authors:
N. Tosi,
M. Godolt,
B. Stracke,
T. Ruedas,
J. L. Grenfell,
D. Höning,
A. Nikolaou,
A. -C. Plesa,
D. Breuer,
T. Spohn
Abstract:
Plate tectonics is a fundamental component for the habitability of the Earth. Yet whether it is a recurrent feature of terrestrial bodies orbiting other stars or unique to the Earth is unknown. The stagnant lid may rather be the most common tectonic expression on such bodies. To understand whether a stagnant-lid planet can be habitable, i.e. host liquid water at its surface, we model the thermal e…
▽ More
Plate tectonics is a fundamental component for the habitability of the Earth. Yet whether it is a recurrent feature of terrestrial bodies orbiting other stars or unique to the Earth is unknown. The stagnant lid may rather be the most common tectonic expression on such bodies. To understand whether a stagnant-lid planet can be habitable, i.e. host liquid water at its surface, we model the thermal evolution of the mantle, volcanic outgassing of H$_2$O and CO$_2$, and resulting climate of an Earth-like planet lacking plate tectonics. We used a 1D model of parameterized convection to simulate the evolution of melt generation and the build-up of an atmosphere of H$_2$O and CO$_2$ over 4.5 Gyr. We then employed a 1D radiative-convective atmosphere model to calculate the global mean atmospheric temperature and the boundaries of the habitable zone (HZ). The evolution of the interior is characterized by the initial production of a large amount of partial melt accompanied by a rapid outgassing of H$_2$O and CO$_2$. At 1 au, the obtained temperatures generally allow for liquid water on the surface nearly over the entire evolution. While the outer edge of the HZ is mostly influenced by the amount of outgassed CO$_2$, the inner edge presents a more complex behaviour that is dependent on the partial pressures of both gases. At 1 au, the stagnant-lid planet considered would be regarded as habitable. The width of the HZ at the end of the evolution, albeit influenced by the amount of outgassed CO$_2$, can vary in a non-monotonic way depending on the extent of the outgassed H$_2$O reservoir. Our results suggest that stagnant-lid planets can be habitable over geological timescales and that joint modelling of interior evolution, volcanic outgassing, and accompanying climate is necessary to robustly characterize planetary habitability.
△ Less
Submitted 19 July, 2017;
originally announced July 2017.
-
Differentiation of Vesta: Implications for a shallow magma ocean
Authors:
Wladimir Neumann,
Doris Breuer,
Tilman Spohn
Abstract:
The Dawn mission confirms predictions that the asteroid 4 Vesta is differentiated with an iron-rich core, a silicate mantle and a basaltic crust, and confirms Vesta as the parent body of the HED meteorites. To better understand its early evolution, we perform numerical calculations of the thermo-chemical evolution adopting new data obtained by the Dawn mission such as mass, bulk density and size o…
▽ More
The Dawn mission confirms predictions that the asteroid 4 Vesta is differentiated with an iron-rich core, a silicate mantle and a basaltic crust, and confirms Vesta as the parent body of the HED meteorites. To better understand its early evolution, we perform numerical calculations of the thermo-chemical evolution adopting new data obtained by the Dawn mission such as mass, bulk density and size of the asteroid. We have expanded the model of Neumann et al. (2012) that includes accretion, compaction, melting and associated changes of material properties and partitioning of 26Al, advective heat transport, and differentiation by porous flow, to include convection and effective cooling in a magma ocean. Depending on the melt fraction, the heat transport by melt segregation is modelled either by porous flow or by convection and heat flux of a magma ocean with a high effective thermal conductivity. We show that partitioning of 26Al and its transport with the silicate melt is crucial for the formation of a magma ocean. Due to the accumulation of 26Al in the sub-surface (for formation times t0<1.5 Ma), a shallow magma ocean with a thickness of 1 to a few tens of km (depending on the silicate melt viscosity) forms. The lifetime of the shallow magma ocean is O(10^4)-O(10^6) years and convection in this layer is accompanied by the extrusion of 26Al at the surface. The interior differentiates from the outside inward with a mantle that is depleted in 26Al and core formation is completed within ~0.3 Ma. The lower mantle experiences melting below 45% suggesting a harzburgitic to dunitic composition. Our results support the formation of eucrites by the extrusion of early partial melt and cumulative eucrites and diogenites may form from the crystallizing shallow magma ocean. Silicate melt is present for up to 150 Ma, and core convects for ~100 Ma, supporting the idea of an early magnetic field.
△ Less
Submitted 13 February, 2014;
originally announced February 2014.
-
Early Thermal Evolution of Planetesimals and its Impact on Processing and Dating of Meteoritic Material
Authors:
H. -P. Gail,
M. Trieloff,
D. Breuer,
T. Spohn
Abstract:
Radioisotopic ages for meteorites and their components provide constraints on the evolution of small bodies: timescales of accretion, thermal and aqueous metamorphism, differentiation, cooling and impact metamorphism. Realising that the decay heat of short-lived nuclides (e.g. 26Al, 60Fe), was the main heat source driving differentiation and metamorphism, thermal modeling of small bodies is of utm…
▽ More
Radioisotopic ages for meteorites and their components provide constraints on the evolution of small bodies: timescales of accretion, thermal and aqueous metamorphism, differentiation, cooling and impact metamorphism. Realising that the decay heat of short-lived nuclides (e.g. 26Al, 60Fe), was the main heat source driving differentiation and metamorphism, thermal modeling of small bodies is of utmost importance to set individual meteorite age data into the general context of the thermal evolution of their parent bodies, and to derive general conclusions about the nature of planetary building blocks in the early solar system. As a general result, modelling easily explains that iron meteorites are older than chondrites, as early formed planetesimals experienced a higher concentration of short-lived nuclides and more severe heating. However, core formation processes may also extend to 10 Ma after formation of Calcium-Aluminum-rich inclusions (CAIs). A general effect of the porous nature of the starting material is that relatively small bodies (< few km) will also differentiate if they form within 2 Ma after CAIs. A particular interesting feature to be explored is the possibility that some chondrites may derive from the outer undifferentiated layers of asteroids that are differentiated in their interiors. This could explain the presence of remnant magnetization in some chondrites due to a planetary magnetic field.
△ Less
Submitted 12 December, 2013;
originally announced December 2013.
