-
Surface-Functionalization of Oleate-Capped Nano-Emitters for Stable Dispersion in 3D-Printable Polymers
Authors:
Akhilesh Kumar Pathak,
Sachin Prashant Kulkarni,
Rachel R. Chan,
Chad A. Mirkin,
Koray Aydin,
Sridhar Krishnaswamy
Abstract:
Two-photon polymerization (2PP) 3D printing is a well-known technique for fabricating passive micro/nanoscale structures, such as microlenses and inversely designed polarization splitters. The integration of light emitting nanoparticle (NP) dopants, such as quantum dots (QDs) and rare-earth doped nanoparticles (RENPs), into a polymer resist would enable 3D printing of active polymer micro-photonic…
▽ More
Two-photon polymerization (2PP) 3D printing is a well-known technique for fabricating passive micro/nanoscale structures, such as microlenses and inversely designed polarization splitters. The integration of light emitting nanoparticle (NP) dopants, such as quantum dots (QDs) and rare-earth doped nanoparticles (RENPs), into a polymer resist would enable 3D printing of active polymer micro-photonic devices, including sensors, lasers, and solid-state displays. Many NPs are stabilized with oleic acid ligands to prevent degradation, but oleate-capped NPs (oc-NPs) tend to agglomerate in nonpolar media despite the hydrophobicity of the ligand. This results in an uneven distribution of NPs in polymers and increased optical extinction properties. In this work, we propose a general approach for dispersing various oc-NPs in commercial 3D printable polymers. We achieve controlled growth of small carbon chains around the oc-NPs by functionalizing the NPs with methyl-methacrylate monomers. The proposed approach is validated on RENPs (~65 nm) and CdSe/ZnS quantum dots (~12 nm) using different commercial polymer resists (IP-Dip and IP-Visio). Dispersions of functionalized NPs (f-NPs) have improved NP density by an order of magnitude and are shown to be stable for several weeks with minimal impact on printing quality. Our approach is generalizable to a variety of oc-NPs and ultimately leads to higher quality polymer-based optical and electronic devices.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Large-area polycrystalline $α$-MoO3 thin films for IR photonics
Authors:
Maria Cristina Larciprete,
Daniele Ceneda,
Chiyu Yang,
Sina Abedini Dereshgi,
Federico Vittorio Lupo,
Maria Pia Casaletto,
Roberto Macaluso,
Mauro Antezza,
Zhuomin M. Zhang,
Marco Centini,
Koray Aydin
Abstract:
In recent years, excitation of surface phonon polaritons (SPhPs) in van der Waals materials received wide attention from the nanophotonics community. Alpha-phase Molybdenum trioxide ($α$-MoO3), a naturally occurring biaxial hyperbolic crystal, emerged as a promising polaritonic material due to its ability to support SPhPs for three orthogonal directions at different wavelength bands (range 10-20…
▽ More
In recent years, excitation of surface phonon polaritons (SPhPs) in van der Waals materials received wide attention from the nanophotonics community. Alpha-phase Molybdenum trioxide ($α$-MoO3), a naturally occurring biaxial hyperbolic crystal, emerged as a promising polaritonic material due to its ability to support SPhPs for three orthogonal directions at different wavelength bands (range 10-20 $μ$m). Here, we report on the fabrication and IR characterization of large-area (over 1 cm$^2$ size) $α$-MoO3 polycrystalline films deposited on fused silica substrates by pulsed laser deposition. Single alpha-phase MoO3 films exhibiting a polarization-dependent reflection peak at 1006 cm$^{-1}$ with a resonance Q-factor as high as 53 were achieved. Reflection can be tuned via changing incident polarization with a dynamic range of $Δ$R=0.3 at 45 deg. incidence angle. We also report a polarization-independent almost perfect absorption condition (R<0.01) at 972 cm$^{-1}$ which is preserved for a broad angle of incidence. The development of a low-cost polaritonic platform with high-Q resonances in the mid-infrared (mid-IR) range is crucial for a wide number of functionalities including sensors, filters, thermal emitters, and label-free biochemical sensing devices. In this framework our findings appear extremely promising for the further development of lithography-free, scalable films, for efficient and large-scale devices operating in the free space, using far-field detection setups.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
A Physics Based Approach for Neural Networks Enabled Design of All-Dielectric Metasurfaces
Authors:
Ibrahim Tanriover,
Wisnu Hadibrata,
Koray Aydin
Abstract:
Machine learning methods have found novel application areas in various disciplines as they offer low-computational cost solutions to complex problems. Recently, metasurface design has joined among these applications, and neural networks enabled significant improvements within a short period of time. However, there are still outstanding challenges that needs to be overcome. Here, we propose a data…
▽ More
Machine learning methods have found novel application areas in various disciplines as they offer low-computational cost solutions to complex problems. Recently, metasurface design has joined among these applications, and neural networks enabled significant improvements within a short period of time. However, there are still outstanding challenges that needs to be overcome. Here, we propose a data pre-processing approach based on the governing laws of the physical problem to eliminate dimensional mismatch between high dimensional optical response and low dimensional feature space of metasurfaces. We train forward and inverse models to predict optical responses of cylindrical meta-atoms and to retrieve their geometric parameters for a desired optical response, respectively. Our approach provides accurate prediction capability even outside the training spectral range. Finally, using our inverse model, we design and demonstrate a focusing metalens as a proof-of-concept application, thus validating the capability of our proposed approach. We believe our method will pave the way towards practical learning-based models to solve more complicated photonic design problems.
△ Less
Submitted 18 June, 2020; v1 submitted 23 April, 2020;
originally announced April 2020.
-
Visible-frequency metasurfaces for broadband anomalous reflection and high-efficiency spectrum splitting
Authors:
Zhongyang Li,
Edgar Palacios,
Serkan Butun,
Koray Aydin
Abstract:
Ultrathin metasurfaces have recently emerged as promising materials to enable novel, flat optical components and surface-confined, miniature photonic devices. However, experimental realization of high-performance metasurfaces at visible frequencies has been a significant challenge due to high plasmonic losses and difficulties in high-uniformity nanofabrication. Here, we propose a highly-efficient…
▽ More
Ultrathin metasurfaces have recently emerged as promising materials to enable novel, flat optical components and surface-confined, miniature photonic devices. However, experimental realization of high-performance metasurfaces at visible frequencies has been a significant challenge due to high plasmonic losses and difficulties in high-uniformity nanofabrication. Here, we propose a highly-efficient yet simple metasurface design comprising of single gradient antenna as unit cell. We demonstrate visible broadband (450 - 850 nm) anomalous reflection and spectrum splitting with 85% conversion efficiency. Average power ratio of anomalous reflection to the strongest diffraction was calculated to be ~ 103 and measured to be ~ 10. The anomalous reflected photons and spectrum splitting performance have been visualized using CCD and characterized using angle-resolved measurement setup. Metasurface design proposed here is a clear departure from conventional metasurfaces utilizing multiple, anisotropic resonators, and could enable high-efficiency, broadband metasurfaces for achieving directional emitters, polarization/spectrum splitting surfaces for spectroscopy and photovoltaics.
△ Less
Submitted 28 October, 2014;
originally announced October 2014.
