-
Anisotropic polarizability of Dy at 532 nm on the intercombination transition
Authors:
Damien Bloch,
Britton Hofer,
Sam Roberto Cohen,
Maxence Lepers,
Antoine Browaeys,
Igor Ferrier-Barbut
Abstract:
We report experimental measurements of the dynamical polarizability of dysprosium, at a wavelength of 532 nm. We measure all three components (scalar, vector, tensor) of the anisotropic polarizability for the ground and the excited manifolds of the intercombination transition of Dy at 626 nm. The apparatus on which the measurements are performed is first presented. We obtain with this setup imagin…
▽ More
We report experimental measurements of the dynamical polarizability of dysprosium, at a wavelength of 532 nm. We measure all three components (scalar, vector, tensor) of the anisotropic polarizability for the ground and the excited manifolds of the intercombination transition of Dy at 626 nm. The apparatus on which the measurements are performed is first presented. We obtain with this setup imaging of single Dy atoms with fidelity above 99 % and losses below 2.5 % induced by imaging. We then describe the methods used to extract the polarizability. In particular, we combine a measurement of trap frequency and trap depth on single atoms in optical tweezers, allowing us to obtain a measurement of the ground state polarizability free of errors in trap waist calibration. The obtained values give a magic condition between two Zeeman states in the ground and excited manifolds, which was used to image single atoms in optical tweezer arrays. The scalar polarizability of the ground state is in disagreement with theoretical expectations, calling for future investigations to resolve the discrepancy.
△ Less
Submitted 24 June, 2024; v1 submitted 16 April, 2024;
originally announced April 2024.
-
High-Index Topological Insulator Resonant Nanostructures from Bismuth Selenide
Authors:
Sukanta Nandi,
Shany Z. Cohen,
Danveer Singh,
Michal Poplinger,
Pilkhaz Nanikashvili,
Doron Naveh,
Tomer Lewi
Abstract:
Topological insulators (TIs) are a class of materials characterized by an insulting bulk and high mobility topologically protected surface states, making them promising candidates for future optoelectronic and quantum devices. Although their electronic and transport properties have been extensively studied, their optical properties and prospective photonic capabilities have not been fully uncovere…
▽ More
Topological insulators (TIs) are a class of materials characterized by an insulting bulk and high mobility topologically protected surface states, making them promising candidates for future optoelectronic and quantum devices. Although their electronic and transport properties have been extensively studied, their optical properties and prospective photonic capabilities have not been fully uncovered. Here, we use a combination of far-field and near-field nanoscale imaging and spectroscopy, to study CVD grown Bi2Se3 nanobeams (NBs). We first extract the mid-infrared (MIR) optical constants of Bi2Se3, revealing refractive index values as high as n ~6.4, and demonstrate that the NBs support Mie-resonances across the MIR. Local near-field reflection phase mapping reveals domains of various phase shifts, providing information on the local optical properties of the NBs. We experimentally measure up to 2π phase-shift across the resonance, in excellent agreement with FDTD simulations. This work highlights the potential of TI Bi2Se3 for quantum circuitry, non-linear generation, high-Q metaphotonics, and IR photodetection.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
Trapping and imaging single dysprosium atoms in optical tweezer arrays
Authors:
Damien Bloch,
Britton Hofer,
Sam R. Cohen,
Antoine Browaeys,
Igor Ferrier-Barbut
Abstract:
We report the preparation and observation of single atoms of dysprosium in arrays of optical tweezers with a wavelength of 532 nm imaged on the intercombination line at 626 nm. We use the anisotropic light shift specific to lanthanides and in particular a large difference in tensor and vector polarizabilities between the ground and excited states to tune the differential light shift and produce tw…
▽ More
We report the preparation and observation of single atoms of dysprosium in arrays of optical tweezers with a wavelength of 532 nm imaged on the intercombination line at 626 nm. We use the anisotropic light shift specific to lanthanides and in particular a large difference in tensor and vector polarizabilities between the ground and excited states to tune the differential light shift and produce tweezers in near-magic or magic polarization. This allows us to find a regime where single atoms can be produced and imaged. Using the tweezer array toolbox to manipulate lanthanides will open new research directions for quantum physics studies by taking advantage of their rich spectrum, large spin and magnetic dipole moment.
△ Less
Submitted 3 October, 2023; v1 submitted 10 July, 2023;
originally announced July 2023.
-
Oxygen-vacancy Mediated Deterministic Domain Distribution at the Onset of Ferroelectricity
Authors:
Asaf Hershkovitz,
Elangovan Hemaprabha,
Doaa Khorshid,
Liyang Ma,
Shi Liu,
Shai Cohen,
Yachin Ivry
Abstract:
Ferroelectric domains are mesoscale structures that mediate between synchronized atomic-scale ion displacements and switchable macroscopic polarization. Here, we evaluated the randomness of the domain distribution at the onset of ferroelectricity. First-principle calculations combined with atomic-scale imaging demonstrate that oxygen vacancies that serve as pinning sites for the ferroic domain wal…
▽ More
Ferroelectric domains are mesoscale structures that mediate between synchronized atomic-scale ion displacements and switchable macroscopic polarization. Here, we evaluated the randomness of the domain distribution at the onset of ferroelectricity. First-principle calculations combined with atomic-scale imaging demonstrate that oxygen vacancies that serve as pinning sites for the ferroic domain walls remain immobile above the Curie temperature. Thus, upon cooling to a ferroelectric state, these oxygen vacancies dictate reproducible domain-wall patterning. Domain-scale imaging with variable-temperature piezoresponse force microscopy confirmed the memory effect, questioning the spontaneity of domain distribution under thermotropic transitions.
△ Less
Submitted 3 February, 2024; v1 submitted 27 February, 2022;
originally announced February 2022.
-
Highly nonlinear dipolar exciton-polaritons in bilayer MoS$_2$
Authors:
Biswajit Datta,
Mandeep Khatoniar,
Prathmesh Deshmukh,
Félix Thouin,
Rezlind Bushati,
Simone De Liberato,
Stephane Kena Cohen,
Vinod M. Menon
Abstract:
Realizing nonlinear optical response in the low photon density limit in solid-state systems has been a long-standing challenge. Semiconductor microcavities in the strong coupling regime hosting exciton-polaritons have emerged as attractive candidates in this context. However, the weak interaction between these quasiparticles has been a hurdle in this quest. Dipolar excitons provide an attractive s…
▽ More
Realizing nonlinear optical response in the low photon density limit in solid-state systems has been a long-standing challenge. Semiconductor microcavities in the strong coupling regime hosting exciton-polaritons have emerged as attractive candidates in this context. However, the weak interaction between these quasiparticles has been a hurdle in this quest. Dipolar excitons provide an attractive strategy to overcome this limitation but are often hindered by their weak oscillator strength. The interlayer dipolar excitons in naturally occurring homobilayer MoS$_2$ alleviates this issue owing to their hybridization of interlayer charge transfer exciton and intralayer B exciton. Here we demonstrate the formation of dipolar exciton polaritons in bilayer MoS$_2$ resulting in unprecedented nonlinear interaction strengths. A ten-fold increase in nonlinearity is observed for the interlayer dipolar excitons compared to the conventional A excitons. These highly nonlinear dipolar polaritons will likely be a frontrunner in the quest for solid-state quantum nonlinear devices.
△ Less
Submitted 1 October, 2022; v1 submitted 25 October, 2021;
originally announced October 2021.
-
Establishing quasi-linear quadrupole functional topology by oxygen-vacancy engineering at a ferroelectric domain wall
Authors:
Hemaprabha Elangovan,
Maya Barzilay,
Jiawei Huang,
Shi Liu,
Shai Cohen,
Yachin Ivry
Abstract:
Oxygen vacancies in two-dimensional metal-oxide structures garner much attention due to unique conductive, magnetic and even superconductive functionalities they induce. Ferroelectric domain walls have been a prominent recent example because they serve as a hub for topological defects that enable unusual symmetries and are relevant for low-energy switching technologies. However, owing to the light…
▽ More
Oxygen vacancies in two-dimensional metal-oxide structures garner much attention due to unique conductive, magnetic and even superconductive functionalities they induce. Ferroelectric domain walls have been a prominent recent example because they serve as a hub for topological defects that enable unusual symmetries and are relevant for low-energy switching technologies. However, owing to the light weight of oxygen atoms and localized effects of their vacancies, the atomic-scale electrical and mechanical influence of oxygen vacancies has remained elusive. Here, stable individual oxygen vacancies were found and engineered in situ at domain walls of seminal titanate perovskite ferroics. The atomic-scale strain, electric-field, charge and dipole-moment distribution around these vacancies were characterized by combining advanced transmission electron microscopy and first-principle methodologies. 3-5 % tensile strain was observed at the immediate surrounding unit cells of the vacancies. The dipole-moment distribution around the vacancy was found to be an alternating head-to-head $-$ tail-to-tail $-$ head-to-head structure, giving rise to a quasi-linear quadrupole topology. Reduction of the nearby Ti ion as well as enhanced charging and electric-field concentration near the vacancy confirmed the quadrupole structure and illustrated its local effects on the electrical and structural properties. Significant intra-band states were found in the unit cell of the vacancies, proposing a meaningful domain-wall conductivity. Oxygen-vacancy engineering and controllable quadrupoles that enable pre-determining both atomic-scale and global functional properties offer a promising platform of electro-mechanical topological solitons and device miniaturization in metal oxides.
△ Less
Submitted 21 April, 2021;
originally announced April 2021.
-
The SPOT-IL Positron Beam Construction and Its Use for Doppler Broadening Measurement of Titanium Thin Films
Authors:
P. Or,
G. Erlichman,
D. Cohen,
I. Sabo-Napadesky,
E. Gordon,
S. Cohen,
O. Presler,
E. O. Cohen,
E. Piasetzky,
H. Steinberg,
S. May-Tal Beck,
Guy Ron
Abstract:
The construction and first operation of the slow positron beam built at the Hebrew University is reported here. The beam follows a traditional design, using a 22Na source, a Tungsten moderator, and a target cell equipped with a load-lock system for easy sample insertion. The beam energy varies between 0.03 keV and 30 keV. The detection system consists of two high purity Germanium detectors, facing…
▽ More
The construction and first operation of the slow positron beam built at the Hebrew University is reported here. The beam follows a traditional design, using a 22Na source, a Tungsten moderator, and a target cell equipped with a load-lock system for easy sample insertion. The beam energy varies between 0.03 keV and 30 keV. The detection system consists of two high purity Germanium detectors, facing each other, allowing low-background Doppler-Broadening (DB) measurements. Event readout is done using a state-of-the-art compact desktop system. The target cell is designed to allow a combined measurement of DB and sample conductivity, with the flexibility to add more detection options in the future. The beam has been successfully tested by using it to charecterize Titanium (Ti) films. Two 1.2 μm Ti films -- as produced, and after annealing, were measured at various energies (2 keV - 25 keV), and the results show consistent behavior with previous measurements.
△ Less
Submitted 12 July, 2020;
originally announced July 2020.
-
Particle-based simulations of steady-state mass transport at high Péclet numbers
Authors:
Thomas Müller,
Paolo Arosio,
Luke Rajah,
Samuel I. A. Cohen,
Emma V. Yates,
Michele Vendruscolo,
Chrisopher M. Dobson,
Tuomas P. J. Knowles
Abstract:
Conventional approaches for simulating steady-state distributions of particles under diffusive and advective transport at high Péclet numbers involve solving the diffusion and advection equations in at least two dimensions. Here, we present an alternative computational strategy by combining a particle-based rather than a field-based approach with the initialisation of particles in proportion to th…
▽ More
Conventional approaches for simulating steady-state distributions of particles under diffusive and advective transport at high Péclet numbers involve solving the diffusion and advection equations in at least two dimensions. Here, we present an alternative computational strategy by combining a particle-based rather than a field-based approach with the initialisation of particles in proportion to their flux. This method allows accurate prediction of the steady state and is applicable even at high Péclet numbers where traditional particle-based Monte-Carlo methods starting from randomly initialised particle distributions fail. We demonstrate that generating a flux of particles according to a predetermined density and velocity distribution at a single fixed time and initial location allows for accurate simulation of mass transport under flow. Specifically, upon initialisation in proportion to their flux, these particles are propagated individually and detected by summing up their Monte-Carlo trajectories in predefined detection regions. We demonstrate quantitative agreement of the predicted concentration profiles with the results of experiments performed with fluorescent particles in microfluidic channels under continuous flow. This approach is computationally advantageous and readily allows non-trivial initial distributions to be considered. In particular, this method is highly suitable for simulating advective and diffusive transport in microfluidic devices.
△ Less
Submitted 17 October, 2015;
originally announced October 2015.
-
Mechanical Properties of APbX3 (A=Cs or CH3NH3; X=I or Br) Perovskite Single Crystals
Authors:
Yevgeny Rakita,
Sidney R. Cohen,
Nir Klein Kedem,
Gary Hodes,
David Cahen
Abstract:
The remarkable optoelectronic, and especially photovoltaic performance of hybrid-organic-inorganic perovskite (HOIP) materials drives efforts to connect materials properties to this performance. From nano-indentation experiments on solution-grown single crystals we obtain elastic modulus and nano-hardness values of APbX3 (A = Cs, CH3NH3 and X = I, Br). The Youngs moduli are about 14, 19.5 and 16 G…
▽ More
The remarkable optoelectronic, and especially photovoltaic performance of hybrid-organic-inorganic perovskite (HOIP) materials drives efforts to connect materials properties to this performance. From nano-indentation experiments on solution-grown single crystals we obtain elastic modulus and nano-hardness values of APbX3 (A = Cs, CH3NH3 and X = I, Br). The Youngs moduli are about 14, 19.5 and 16 GPa, for CH3NH3PbI3, CH3NH3PbBr3 and CsPbBr3, respectively, lending credence to theoretically calculated values. We discuss possible relevance of our results to suggested self-healing, ion diffusion and ease of manufacturing. Using our results, together with literature data on elastic moduli, we classified HOIPs amongst relevant materials groups, based on their elasto-mechanical properties.
△ Less
Submitted 17 August, 2015;
originally announced August 2015.
-
Interfacial Phenomena of Solvent-diluted Block Copolymers
Authors:
Shai Cohen,
David Andelman
Abstract:
A phenomenological mean-field theory is used to investigate the properties of solvent-diluted di-block copolymers (BCP), in which the two BCP components (A and B) form a variety of phases that are diluted by a solvent (S). Using this approach, we model mixtures of di-block copolymers and a solvent and obtained the corresponding critical behavior. In the low solvent limit, we find how the critical…
▽ More
A phenomenological mean-field theory is used to investigate the properties of solvent-diluted di-block copolymers (BCP), in which the two BCP components (A and B) form a variety of phases that are diluted by a solvent (S). Using this approach, we model mixtures of di-block copolymers and a solvent and obtained the corresponding critical behavior. In the low solvent limit, we find how the critical point depends on the solvent density. Due to the non-linear nature of the coupling between the A/B and BCP/solvent concentrations, the A/B modulation induces modulations in the polymer-solvent relative concentration with a double wavenumber. The free boundary separating the polymer-rich phase from the solvent-rich one is studied in two situations. First, we show how the presence of a chemically patterned substrate leads to deformations of the BCP film/solvent interface, creation of terraces in lamellar BCP film and even formation of multi-domain droplets as induced by the patterned substrate. Our results are in agreement with previous self-consistent field theory calculations. Second, we compare the surface tension between parallel lamellae coexisting with a solvent phase with that of a perpendicular one, and show that the surface tension has a non-monotonic dependence on temperature. The anisotropic surface tension can lead to deformation of spherical BCP droplets into lens-shaped ones, together with re-orientation of the lamellae inside the droplet during the polymer/solvent phase separation process in agreement with experiment.
△ Less
Submitted 22 December, 2013; v1 submitted 26 July, 2013;
originally announced July 2013.
-
Temperature and force dependence of nanoscale electron transport via the Cu protein Azurin
Authors:
Wenjie Li,
Lior Sepunaru,
Nadav Amdursky,
Sidney R. Cohen,
Israel Pecht,
Mordechai Sheves,
David Cahen
Abstract:
The mechanisms of solid-state electron transport (ETp) via a monolayer of immobilized Azurin (Az) was examined by conducting probe atomic force microscopy (CP-AFM), both as function of temperature (248 - 373K) and of applied tip force (6-12 nN). By varying both temperature and force in CP-AFM, we find that the ETp mechanism can alter with a change in the force applied via the tip to the proteins.…
▽ More
The mechanisms of solid-state electron transport (ETp) via a monolayer of immobilized Azurin (Az) was examined by conducting probe atomic force microscopy (CP-AFM), both as function of temperature (248 - 373K) and of applied tip force (6-12 nN). By varying both temperature and force in CP-AFM, we find that the ETp mechanism can alter with a change in the force applied via the tip to the proteins. As the applied force increases, ETp via Az changes from temperature-independent to thermally activated at high temperatures. This is in contrast to the Cu-depleted form of Az (apo-Az), where increasing the applied force causes only small quantitative effects, that fit with a decrease in electrode spacing. At low force ETp via holo-Az is temperature-independent and thermally activated via apo-Az. This observation agrees with macroscopic-scale measurements, thus confirming that the difference in ETp dependence on temperature between holo- and apo-Az is an inherent one that may reflect a difference in rigidity between the two forms. An important implication of these results, which depend on CP-AFM measurements over a significant temperature range, is that for ETp measurements on floppy systems, such as proteins, the stress applied to the sample should be kept constant or, at least controlled during measurement.
△ Less
Submitted 14 September, 2012; v1 submitted 22 July, 2012;
originally announced July 2012.
-
Nucleated polymerisation in the presence of pre-formed seed filaments
Authors:
Samuel I. A. Cohen,
Michele Vendruscolo,
Christopher M. Dobson,
Tuomas P. J. Knowles
Abstract:
We revisit the classical problem of nucleated polymerisation and derive a range of exact results describing polymerisation in systems intermediate between the well-known limiting cases of a reaction starting from purely soluble material and for a reaction where no new growth nuclei are formed.
We revisit the classical problem of nucleated polymerisation and derive a range of exact results describing polymerisation in systems intermediate between the well-known limiting cases of a reaction starting from purely soluble material and for a reaction where no new growth nuclei are formed.
△ Less
Submitted 7 July, 2011;
originally announced July 2011.
-
Terrace-Width Distributions and Step-Step Repulsions on Vicinal Surfaces: Symmetries, Scaling, Simplifications, Subtleties, and Schrödinger
Authors:
T. L. Einstein,
Howard L. Richards,
Saul D. Cohen,
O. Pierre-Louis
Abstract:
For more than three decades, measurement of terrace width distributions (TWDs) of vicinal crystal surfaces have been recognized as arguably the best way to determine the dimensionless strength $\tilde{A}$ of the elastic repulsion between steps. For sufficiently strong repulsions, the TWD is expected to be Gaussian, with $\tilde{A}$ varying inversely with the squared variance. However, there has…
▽ More
For more than three decades, measurement of terrace width distributions (TWDs) of vicinal crystal surfaces have been recognized as arguably the best way to determine the dimensionless strength $\tilde{A}$ of the elastic repulsion between steps. For sufficiently strong repulsions, the TWD is expected to be Gaussian, with $\tilde{A}$ varying inversely with the squared variance. However, there has been a controversy over the proportionality constant. From another perspective the TWD can be described as a continuous generalized Wigner distribution (CGWD) essentially no more complicated than a Gaussian but a much better approximation at the few calibration points where exact solutions exist. This paper combines concisely the experimentally most useful results from several earlier papers on this subject and describes some advancements that are in progress regarding numerical tests and in using Schrödinger-equation formalism to give greater understanding of the origin of the CGWD and to give hope of extensions to more general interaction potentials between steps. There are many implications for future experiments.
△ Less
Submitted 14 December, 2000;
originally announced December 2000.
-
Extraction of Step-Repulsion Strengths from Terrace Width Distributions: Statistical and Analytic Considerations
Authors:
Howard L. Richards,
Saul D. Cohen,
T. L. Einstein,
M. Giesen
Abstract:
Recently it has been recognized that the so-called generalized Wigner distribution may provide at least as good a description of terrace width distributions (TWDs) on vicinal surfaces as the standard Gaussian fit and is particularly applicable for weak repulsions between steps, where the latter fails. Subsequent applications to vicinal copper surfaces at various temperatures confirmed the servic…
▽ More
Recently it has been recognized that the so-called generalized Wigner distribution may provide at least as good a description of terrace width distributions (TWDs) on vicinal surfaces as the standard Gaussian fit and is particularly applicable for weak repulsions between steps, where the latter fails. Subsequent applications to vicinal copper surfaces at various temperatures confirmed the serviceability of the new analysis procedure but raised some theoretical questions. Here we address these issues using analytical, numerical, and statistical methods. We propose an extension of the generalized Wigner distribution to a two-parameter fit that allows the terrace widths to be scaled by an optimal effective mean width. We discuss quantitatively the approach of a Wigner distribution to a Gaussian form for strong repulsions, how errors in normalization or mean affect the deduced interaction, and how optimally to extract the interaction from the variance and mean of the TWD. We show that correlations reduce by two orders of magnitude the number of {\em independent} measurements in a typical STM image. We also discuss the effect of the discreteness ("quantization") of terrace widths, finding that for high misorientation (small mean width) the standard continuum analysis gives faulty estimates of step interactions.
△ Less
Submitted 18 April, 2000; v1 submitted 19 November, 1999;
originally announced November 1999.
