-
Experimental Realization of a Reconfigurable Electroacoustic Topological Insulator
Authors:
Amir Darabi,
Manuel Collet,
Michael J Leamy
Abstract:
A substantial challenge in guiding elastic waves is the presence of reflection and scattering at sharp edges, defects, and disorders. Recently, mechanical topological insulators have sought to overcome this challenge by supporting back-scattering resistant wave transmission. In this Letter, we propose and experimentally demonstrate the first \emph{reconfigurable electroacoustic} topological insula…
▽ More
A substantial challenge in guiding elastic waves is the presence of reflection and scattering at sharp edges, defects, and disorders. Recently, mechanical topological insulators have sought to overcome this challenge by supporting back-scattering resistant wave transmission. In this Letter, we propose and experimentally demonstrate the first \emph{reconfigurable electroacoustic} topological insulator exhibiting an analog to the quantum valley Hall effect (QVHE). Using programmable switches, this phononic structure allows for rapid reconfiguration of domain walls and thus the ability to control back-scattering resistant wave propagation along dynamic interfaces for phonons lying in static and finite-frequency regimes. Accordingly, a graphene-like Polyactic Acid (PLA) layer serves as the host medium, equipped with periodically arranged and bonded piezoelectric patches, resulting in two Dirac cones at the $K-$points. The PZT patches are then connected to negative capacitance external circuits to break inversion symmetry and create nontrivial topologically-protected bandgaps. As such, topologically protected interface waves are demonstrated numerically and validated experimentally for different predefined trajectories over a broad frequency range.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Determining key spin-orbitronic parameters by means of propagating spin waves
Authors:
O. Gladii,
M. Collet,
Y. Henry,
J. -V. Kim,
A. Anane,
M. Bailleul
Abstract:
We characterize spin wave propagation and its modification by an electrical current in Permalloy(Py)/Pt bilayers with Py thickness between 4 and 20 nm. First, we analyze the frequency non-reciprocity of surface spin waves and extract from it the interfacial Dzyaloshinskii-Moriya interaction constant $D_s$ accounting for an additional contribution due to asymmetric surface anisotropies. Second, we…
▽ More
We characterize spin wave propagation and its modification by an electrical current in Permalloy(Py)/Pt bilayers with Py thickness between 4 and 20 nm. First, we analyze the frequency non-reciprocity of surface spin waves and extract from it the interfacial Dzyaloshinskii-Moriya interaction constant $D_s$ accounting for an additional contribution due to asymmetric surface anisotropies. Second, we measure the spin-wave relaxation rate and deduce from it the Py/Pt spin mixing conductance $g^{\uparrow\downarrow}_{eff}$. Last, applying a \textit{dc} electrical current, we extract the spin Hall conductivity $σ_{SH}$ from the change of spin wave relaxation rate due to the spin-Hall spin transfer torque. We obtain a consistent picture of the spin wave propagation data for different film thicknesses using a single set of parameters $D_s=0.25$ pJ/m, $g^{\uparrow\downarrow}_{eff} = 3.2\times 10^{19}$ m$^{-2}$ and $σ_{SH}=4\times10^{5}$ S/m.
△ Less
Submitted 11 September, 2019;
originally announced September 2019.
-
Broadband acoustic isolator in the audible range : nonreciprocal acoustic propagation using programmable boundary conditions
Authors:
Sami Karkar,
Etienne Rivet,
Manuel Collet
Abstract:
We propose a novel concept of nonreciprocal devices in acoustics, illustrated by the design of an acoustic diode, or isolator. A boundary control strategy was previously shown to provide direction-dependent propagation properties in acoustic waveguides. In this paper, the boundary control is reinterpreted as a source term for the inhomogeneous wave equation, in a purely 1D model. Nonreciprocity is…
▽ More
We propose a novel concept of nonreciprocal devices in acoustics, illustrated by the design of an acoustic diode, or isolator. A boundary control strategy was previously shown to provide direction-dependent propagation properties in acoustic waveguides. In this paper, the boundary control is reinterpreted as a source term for the inhomogeneous wave equation, in a purely 1D model. Nonreciprocity is then obtained using a distributed source that replaces the non-standard boundary condition where the normal velocity at the boundary is a function of both pressure and its tangential derivative. Numerical simulations are carried out to validate the theoretical model, and the scattering matrix of the device is retrieved to investigate the nonreciprocal nature of the system. Results show that the proposed device can lead to an efficient, ultra-broadband, sub-wavelength, acoustic isolator. Finally, the effects of actual, finite-sized transducers on the performance of the acoustic isolator are discussed.
△ Less
Submitted 15 December, 2017; v1 submitted 14 December, 2017;
originally announced December 2017.
-
Relaxed micromorphic modeling of the interface between a homogeneous solid and a band-gap metamaterial: new perspectives towards meta-structural design
Authors:
Angela Madeo,
Gabriele Barbagallo,
Manuel Collet,
Marco Valerio d'Agostino,
Marco Miniaci,
Patrizio Neff
Abstract:
In the present paper, the material parameters of the isotropic relaxed micromorphic model derived for a specific metamaterial in a previous contribution are used to model its transmission properties. Specifically, the reflection and transmission coefficients at an interface between a homogeneous solid and the chosen metamaterial are analyzed by using both the relaxed micromorphic model and a direc…
▽ More
In the present paper, the material parameters of the isotropic relaxed micromorphic model derived for a specific metamaterial in a previous contribution are used to model its transmission properties. Specifically, the reflection and transmission coefficients at an interface between a homogeneous solid and the chosen metamaterial are analyzed by using both the relaxed micromorphic model and a direct FEM implementation of the detailed microstructure. The obtained results show an excellent agreement between the transmission spectra derived via our enriched continuum model and those issued by the direct FEM simulation. Such excellent agreement validates the indirect measure of the material parameters and opens the way towards an efficient meta-structural design.
△ Less
Submitted 7 August, 2017;
originally announced August 2017.
-
Nano-patterned magnonic crystals based on ultrathin YIG films
Authors:
M. Collet,
M. Evelt,
V. E. Demidov,
J. L. Prieto,
M. Muñoz,
J. Ben Youssef,
G. de Loubens,
O. Klein,
P. Bortolotti,
V. Cros,
A. Anane,
S. O. Demokritov
Abstract:
We demonstrate a microscopic magnonic-crystal waveguide produced by nano-patterning of a 20 nm thick film of Yttrium Iron Garnet. By using the phase-resolved micro-focus Brillouin light scattering spectroscopy, we map the intensity and the phase of spin waves propagating in such a periodic magnetic structure. Based on these maps, we obtain the dispersion and the attenuation characteristics of spin…
▽ More
We demonstrate a microscopic magnonic-crystal waveguide produced by nano-patterning of a 20 nm thick film of Yttrium Iron Garnet. By using the phase-resolved micro-focus Brillouin light scattering spectroscopy, we map the intensity and the phase of spin waves propagating in such a periodic magnetic structure. Based on these maps, we obtain the dispersion and the attenuation characteristics of spin waves providing detailed information about the physics of spin-wave propagation in the magnonic crystal. We show that, in contrast to the simplified physical picture, the maximum attenuation of spin waves is achieved close to the edge of the magnonic band gap, which is associated with non-trivial reflection characteristics of spin waves in non-uniform field potentials.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
Spin-wave propagation in ultra-thin YIG based waveguides
Authors:
M. Collet,
O. Gladii,
M. Evelt,
V. Bessonov,
L. Soumah,
P. Bortolotti,
S. O Demokritov,
Y. Henry,
V. Cros,
M. Bailleul,
V. E. Demidov,
A. Anane
Abstract:
Spin-wave propagation in an assembly of microfabricated 20 nm thick, 2.5 μm wide Yttrium Iron Garnet (YIG) waveguides is studied using propagating spin-wave spectroscopy (PSWS) and phase resolved micro-focused Brillouin Light Scattering (μ-BLS) spectroscopy. We show that spin-wave propagation in 50 parallel waveguides is robust against microfabrication induced imperfections. Spin-wave propagation…
▽ More
Spin-wave propagation in an assembly of microfabricated 20 nm thick, 2.5 μm wide Yttrium Iron Garnet (YIG) waveguides is studied using propagating spin-wave spectroscopy (PSWS) and phase resolved micro-focused Brillouin Light Scattering (μ-BLS) spectroscopy. We show that spin-wave propagation in 50 parallel waveguides is robust against microfabrication induced imperfections. Spin-wave propagation parameters are studied in a wide range of excitation frequencies for the Damon-Eshbach (DE) configuration. As expected from its low damping, YIG allows the propagation of spin waves over long distances (the attenuation lengths is 25 μm at μ$_{0}$H = 45 mT). Direct mapping of spin waves by μ-BLS allows us to reconstruct the spin-wave dispersion relation and to confirm the multi-mode propagation in the waveguides, glimpsed by propagating spin-wave spectroscopy.
△ Less
Submitted 27 October, 2016;
originally announced October 2016.
-
Direct observation of dynamic modes excited in a magnetic insulator by pure spin current
Authors:
V. E. Demidov,
M. Evelt,
V. Bessonov,
S. O. Demokritov,
J. L. Prieto,
M. Muñoz,
J. Ben Youssef,
V. V. Naletov,
G. de Loubens,
O. Klein,
M. Collet,
P. Bortolotti,
V. Cros,
A. Anane
Abstract:
Excitation of magnetization dynamics by pure spin currents has been recently recognized as an enabling mechanism for spintronics and magnonics, which allows implementation of spin-torque devices based on low-damping insulating magnetic materials. Here we report the first spatially-resolved study of the dynamic modes excited by pure spin current in nanometer-thick microscopic insulating Yttrium Iro…
▽ More
Excitation of magnetization dynamics by pure spin currents has been recently recognized as an enabling mechanism for spintronics and magnonics, which allows implementation of spin-torque devices based on low-damping insulating magnetic materials. Here we report the first spatially-resolved study of the dynamic modes excited by pure spin current in nanometer-thick microscopic insulating Yttrium Iron Garnet disks. We show that these modes exhibit nonlinear self-broadening preventing the formation of the self-localized magnetic bullet, which plays a crucial role in the stabilization of the single-mode magnetization oscillations in all-metallic systems. This peculiarity associated with the efficient nonlinear mode coupling in low-damping materials can be among the main factors governing the interaction of pure spin currents with the dynamic magnetization in high-quality magnetic insulators.
△ Less
Submitted 17 May, 2016;
originally announced May 2016.
-
Spin wave amplification using the spin Hall effect in permalloy/platinum bilayers
Authors:
O. Gladii,
M. Collet,
K. Garcia-Hernandez,
C. Cheng,
S. Xavier,
P. Bortolotti,
V. Cros,
Y. Henry,
J. -V. Kim,
A. Anane,
M. Bailleul
Abstract:
We investigate the effect of an electrical current on the attenuation length of a 900 nm wavelength spin-wave in a permalloy/Pt bilayer using propagating spin-wave spectroscopy. The modification of the spin-wave relaxation rate is linear in current density, reaching up to 14% for a current density of 2.3$\times10^{11} $A/m$^2$ in Pt. This change is attributed to the spin transfer torque induced by…
▽ More
We investigate the effect of an electrical current on the attenuation length of a 900 nm wavelength spin-wave in a permalloy/Pt bilayer using propagating spin-wave spectroscopy. The modification of the spin-wave relaxation rate is linear in current density, reaching up to 14% for a current density of 2.3$\times10^{11} $A/m$^2$ in Pt. This change is attributed to the spin transfer torque induced by the spin Hall effect and corresponds to an effective spin Hall angle of 0.13, which is among the highest values reported so far. The spin Hall effect thus appears as an efficient way of amplifying/attenuating propagating spin waves.
△ Less
Submitted 17 March, 2016;
originally announced March 2016.
-
Spin to charge conversion in MoS$_{2}$ monolayer with spin pumping
Authors:
Cheng Cheng,
Martin Collet,
Juan-Carlos Rojas Sánchez,
Viktoria Ivanovskaya,
Bruno Dlubak,
Pierre Seneor,
Albert Fert,
Hyun Kim,
Gang Hee Han,
Young Hee Lee,
Heejun Yang,
Abdelmadjid Anane
Abstract:
Layered transition-metal dichalcogenides (TMDs) family are gaining increasing importance due to their unique electronic band structures, promising interplay among light, valley (pseudospin), charge and spin degrees of freedom. They possess large intrinsic spin-orbit interaction which make them most relevant for the emerging field of spin-orbitronics. Here we report on the conversion of spin curren…
▽ More
Layered transition-metal dichalcogenides (TMDs) family are gaining increasing importance due to their unique electronic band structures, promising interplay among light, valley (pseudospin), charge and spin degrees of freedom. They possess large intrinsic spin-orbit interaction which make them most relevant for the emerging field of spin-orbitronics. Here we report on the conversion of spin current to charge current in MoS2 monolayer. Using spin pumping from a ferromagnetic layer (10 nm of cobalt) we find that the spin to charge conversion is highly efficient. Analysis in the frame of the inverse Rashba-Edelstein (RE) effect yields a RE length in excess of 4 nm at room temperature. Furthermore, owing to the semiconducting nature of MoS$_{2}$, it is found that back-gating allows electrical field control of the spin-relaxation rate of the MoS$_{2}$-metallic stack.
△ Less
Submitted 6 June, 2016; v1 submitted 12 October, 2015;
originally announced October 2015.
-
Generation of coherent spin-wave modes in Yttrium Iron Garnet microdiscs by spin-orbit torque
Authors:
Martin Collet,
Xavier De Milly,
Olivier D'Allivy-Kelly,
Vladimir V. Naletov,
Rozenn Bernard,
Paolo Bortolotti,
Vladislav Demidov,
Sergej Demokritov,
Jose Luis Prieto,
Manuel Muñoz,
Abdelmadjid Anane,
Vincent Cros,
Grégoire De Loubens,
Olivier Klein
Abstract:
Spin-orbit effects [1-4] have the potential of radically changing the field of spintronics by allowing transfer of spin angular momentum to a whole new class of materials. In a seminal letter to Nature [5], Kajiwara et al. showed that by depositing Platinum (Pt, a normal metal) on top of a 1.3 $μ$m thick Yttrium Iron Garnet (YIG, a magnetic insulator), one could effectively transfer spin angular m…
▽ More
Spin-orbit effects [1-4] have the potential of radically changing the field of spintronics by allowing transfer of spin angular momentum to a whole new class of materials. In a seminal letter to Nature [5], Kajiwara et al. showed that by depositing Platinum (Pt, a normal metal) on top of a 1.3 $μ$m thick Yttrium Iron Garnet (YIG, a magnetic insulator), one could effectively transfer spin angular momentum through the interface between these two different materials. The outstanding feature was the detection of auto-oscillation of the YIG when enough dc current was passed in the Pt. This finding has created a great excitement in the community for two reasons: first, one could control electronically the damping of insulators, which can offer improved properties compared to metals, and here YIG has the lowest damping known in nature; second, the damping compensation could be achieved on very large objects, a particularly relevant point for the field of magnonics [6,7] whose aim is to use spin-waves as carriers of information. However, the degree of coherence of the observed auto-oscillations has not been addressed in ref. [5]. In this work, we emphasize the key role of quasi-degenerate spin-wave modes, which increase the threshold current. This requires to reduce both the thickness and lateral size in order to reach full damping compensation [8] , and we show clear evidence of coherent spin-orbit torque induced auto-oscillation in micron-sized YIG discs of thickness 20 nm.
△ Less
Submitted 7 April, 2015;
originally announced April 2015.
-
A combination of capillary assembly and dielectrophoresis for wafer scale integration of carbon nanotubes-based electrical and mechanical devices
Authors:
Florent Seichepine,
Sven Salomon,
Maéva Collet,
Samuel Guillon,
Liviu Nicu,
Guilhem Larrieu,
Emmanuel Flahaut,
Christophe Vieu
Abstract:
The wafer scale integration of carbon nanotubes (CNT) remains a challenge for electronic and electromechanical applications. We propose a novel CNT integration process relying on the combination of controlled capillary assembly and buried electrode dielectrophoresis (DEP). This process enables to monitor the precise spatial localization of a high density of CNTs and their alignment in a pre-define…
▽ More
The wafer scale integration of carbon nanotubes (CNT) remains a challenge for electronic and electromechanical applications. We propose a novel CNT integration process relying on the combination of controlled capillary assembly and buried electrode dielectrophoresis (DEP). This process enables to monitor the precise spatial localization of a high density of CNTs and their alignment in a pre-defined direction. Large arrays of independent and low resistivity (4.4 x 10^-5 Ω.m) interconnections were achieved using this hybrid assembly with double-walled carbon nanotubes (DWNT). Finally, arrays of suspended individual CNT carpets have been realized and we demonstrate their potential use as functional nano-electromechanical systems (NEMS) by monitoring their resonance frequencies (ranging between 1.7 MHz to 10.5MHz) using a Fabry-Perot interferometer.
△ Less
Submitted 28 September, 2011;
originally announced September 2011.
-
Experimental Evaluation of the Rheological Properties of Veriflex Shape Memory Polymer
Authors:
Jan Klesa,
Vincent Placet,
Emmanuel Foltete,
Manuel Collet
Abstract:
Shape memory polymers (SMPs) are materials with a great potential for future use in smart materials and structures. When heated from cold state (below the transformation temperature, which can either be the glass transition temperature or the melting temperature of the polymer) to hot state (above the transformation temperature) they undergo transformation which can be compared with martensitic…
▽ More
Shape memory polymers (SMPs) are materials with a great potential for future use in smart materials and structures. When heated from cold state (below the transformation temperature, which can either be the glass transition temperature or the melting temperature of the polymer) to hot state (above the transformation temperature) they undergo transformation which can be compared with martensitic transformation of shape memory alloys. This process induces great changes of the mechanical properties and some shape memory phenomenon can be observed. This study is an experimental evaluation of the mechanical properties of SMP Veriflex under different test conditions. Veriflex was chosen because of its easy accessibility. Furthermore its properties are similar to epoxy resins which make it very suitable for usage in a wide variety of technical applications. Dynamic mechanical analysis (DMA) was used to determine evolution of the viscoelastic properties versus temperature and frequency under cyclic harmonic loading. The glass transition temperature clearly appears in a range from 45\degree C to 60\degree C depending on loading frequency. The glass transition is noticeably marked by an impressive decrease in the storage modulus of about 4 decades. The master curve of Veriflex was created and allows the time-temperature superposition to be constructed for this material. Thermo-mechanical working cycle of SMP with 100% elongation was also experimentally tested. Finally results from all these experimental investigations were used to design a demonstrator showing the possibility of application in engineering and especially for shape control.
△ Less
Submitted 16 September, 2009;
originally announced September 2009.