-
Anodization-free fabrication process for high-quality cross-type Josephson tunnel junctions based on a Nb/Al-AlO$_x$/Nb trilayer
Authors:
Fabienne Bauer,
Christian Enss,
Sebastian Kempf
Abstract:
Josephson tunnel junctions form the basis for various superconducting electronic devices. For this reason, enormous efforts are routinely taken to establish and later on maintain a scalable and reproducible wafer-scale manufacturing process for high-quality Josephson junctions. Here, we present an anodization-free fabrication process for Nb/Al-AlO$_x$/Nb cross-type Josephson junctions that require…
▽ More
Josephson tunnel junctions form the basis for various superconducting electronic devices. For this reason, enormous efforts are routinely taken to establish and later on maintain a scalable and reproducible wafer-scale manufacturing process for high-quality Josephson junctions. Here, we present an anodization-free fabrication process for Nb/Al-AlO$_x$/Nb cross-type Josephson junctions that requires only a small number of process steps and that is intrinsically compatible with wafer-scale fabrication. We show that the fabricated junctions are of very high-quality and, compared to other junction types, exhibit not only a significantly reduced capacitance but also an almost rectangular critical current density profile. Our process hence enables the usage of low capacitance Josephson junctions for superconducting electronic devices such as ultra-low noise dc-SQUIDs, microwave SQUID multiplexers based on non-hysteretic rf-SQUIDs and RFSQ circuits.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Magnetic microcalorimeter with paramagnetic temperature sensors and integrated dc-SQUID readout for high-resolution X-ray emission spectroscopy
Authors:
Matthäus Krantz,
Francesco Toschi,
Benedikt Maier,
Greta Heine,
Christian Enss,
Sebastian Kempf
Abstract:
We present two variants of a magnetic microcalorimeter with paramagnetic temperature sensors and integrated dc-SQUID readout for high-resolution X-ray emission spectroscopy. Each variant employs two overhanging gold absorbers with a sensitive area of 150$μ$m x 150$μ$m and a thickness of 3$μ$m, thus providing a quantum efficiency of 98% for photons up to 5keV and 50% for photons up to 10keV. The fi…
▽ More
We present two variants of a magnetic microcalorimeter with paramagnetic temperature sensors and integrated dc-SQUID readout for high-resolution X-ray emission spectroscopy. Each variant employs two overhanging gold absorbers with a sensitive area of 150$μ$m x 150$μ$m and a thickness of 3$μ$m, thus providing a quantum efficiency of 98% for photons up to 5keV and 50% for photons up to 10keV. The first variant turned out to be fully operational, but, at the same time, to suffer from Joule power dissipation of the Josephson junction shunt resistors, athermal phonon loss, and slew rate limitations of the overall setup. Overall, it only achieved an energy resolution $ΔE_\mathrm{FWHM} = 8.9eV$. In the second variant, we introduced an innovative `tetrapod absorber geometry' as well as a membrane-technique for protecting the temperature sensors against the power dissipation of the shunt resistors. By this, the second variant achieves an outstanding energy resolution of $ΔE_\mathrm{FWHM} =1.25(18)eV$ and hence provides, to our knowledge, the present best energy resolving power $E/ΔE_\mathrm{FWHM}$ among all existing energy-dispersive detectors for soft and tender X-rays.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Measuring Magnetic 1/f Noise in Superconducting Microstructures and the Fluctuation-Dissipation Theorem
Authors:
Matthew Herbst,
Andreas Fleischmann,
Daniel Hengstler,
David Mazibrada,
Lukas Münch,
Andreas Reifenberger,
Christian Ständer,
Christian Enss
Abstract:
The performance of superconducting devices like qubits, SQUIDs, and particle detectors is often limited by finite coherence times and 1/f noise. Various types of slow fluctuators in the Josephson junctions and the passive parts of these superconducting circuits can be the cause, and devices usually suffer from a combination of different noise sources, which are hard to disentangle and therefore ha…
▽ More
The performance of superconducting devices like qubits, SQUIDs, and particle detectors is often limited by finite coherence times and 1/f noise. Various types of slow fluctuators in the Josephson junctions and the passive parts of these superconducting circuits can be the cause, and devices usually suffer from a combination of different noise sources, which are hard to disentangle and therefore hard to eliminate. One contribution is magnetic 1/f noise caused by fluctuating magnetic moments of magnetic impurities or dangling bonds in superconducting inductances, surface oxides, insulating oxide layers, and adsorbates. In an effort to further analyze such sources of noise, we have developed an experimental set-up to measure both the complex impedance of superconducting microstructures, and the overall noise picked up by these structures. This allows for important sanity checks by connecting both quantities via the fluctuation-dissipation theorem. Since these two measurements are sensitive to different types of noise, we are able to identify and quantify individual noise sources. The superconducting inductances under investigation form a Wheatstone-like bridge, read out by two independent cross-correlated dc-SQUID read-out chains. The resulting noise resolution lies beneath the quantum limit of the front-end SQUIDs and lets us measure noise caused by just a few ppm of impurities in close-by materials. We present measurements of the insulating SiO2 layers of our devices, and magnetically doped noble metal layers in the vicinity of the pickup coils at T = 40 mK - 800 mK and f = 1 Hz - 100 kHz.
△ Less
Submitted 1 June, 2023; v1 submitted 27 March, 2023;
originally announced March 2023.
-
Simultaneous MMC readout using a tailored μMUX based readout system
Authors:
Daniel Richter,
Mathias Wegner,
Felix Ahrens,
Christian Enss,
Nick Karcher,
Oliver Sander,
Constantin Schuster,
Marc Weber,
Thomas Wolber,
Sebastian Kempf
Abstract:
Magnetic microcalorimeters (MMCs) are cryogenic, energy-dispersive single-particle detectors providing excellent energy resolution, intrinsically fast signal rise time, quantum efficiency close to 100\%, large dynamic range as well as almost ideal linear response. One of the remaining challenges to be overcome to ultimately allow for the utilization of large-scale MMC based detector arrays with th…
▽ More
Magnetic microcalorimeters (MMCs) are cryogenic, energy-dispersive single-particle detectors providing excellent energy resolution, intrinsically fast signal rise time, quantum efficiency close to 100\%, large dynamic range as well as almost ideal linear response. One of the remaining challenges to be overcome to ultimately allow for the utilization of large-scale MMC based detector arrays with thousands to millions of individual pixels is the realization of a SQUID based multiplexing technique particularly tailored for MMC readout. Within this context, we report on the first truly multiplexed readout of an MMC based detector array using a frequency-division multiplexing approach realized by a custom microwave SQUID multiplexer based readout system.
△ Less
Submitted 27 March, 2023; v1 submitted 14 November, 2022;
originally announced November 2022.
-
Flux ramp modulation based hybrid microwave SQUID multiplexer
Authors:
Constantin Schuster,
Mathias Wegner,
Christian Enss,
Sebastian Kempf
Abstract:
We present a hybrid microwave SQUID multiplexer that combines two frequency-division multiplexing techniques to allow multiplexing a given number of cryogenic detectors with only a fraction of frequency encoding resonators. Similar to conventional microwave SQUID multiplexing, our multiplexer relies on inductively coupling non-hysteretic, unshunted rf-SQUIDs to superconducting microwave resonators…
▽ More
We present a hybrid microwave SQUID multiplexer that combines two frequency-division multiplexing techniques to allow multiplexing a given number of cryogenic detectors with only a fraction of frequency encoding resonators. Similar to conventional microwave SQUID multiplexing, our multiplexer relies on inductively coupling non-hysteretic, unshunted rf-SQUIDs to superconducting microwave resonators as well as applying flux ramp modulation for output signal linearization. However, instead of utilizing one resonator per SQUID, we couple multiple SQUIDs to a common readout resonator and encode the SQUID input signals in sidebands of the microwave carrier by varying the flux ramp modulation frequency for each SQUID. We prove the suitability of our approach using a prototype device and argue by means of fundamental information theory that our approach is particularly suited for reading out large cryogenic bolometer arrays.
△ Less
Submitted 11 February, 2022;
originally announced February 2022.
-
Analytical model of the readout power and SQUID hysteresis parameter dependence of the resonator characteristics of microwave SQUID multiplexers
Authors:
Mathias Wegner,
Christian Enss,
Sebastian Kempf
Abstract:
We report on the development of an analytical model describing the readout power and SQUID hysteresis parameter dependence of the resonator characteristics used for frequency encoding in microwave SQUID multiplexers. Within the context of this model, we derived the different dependencies by analyzing the Fourier components of the non-linear response of the non-hysteretic rf-SQUID. We show that our…
▽ More
We report on the development of an analytical model describing the readout power and SQUID hysteresis parameter dependence of the resonator characteristics used for frequency encoding in microwave SQUID multiplexers. Within the context of this model, we derived the different dependencies by analyzing the Fourier components of the non-linear response of the non-hysteretic rf-SQUID. We show that our model contains the existing model as a limiting case, leading to identical analytical expressions for small readout powers. Considering the approximations we made, our model is valid for rf-SQUID hysteresis parameters $β_{\mathrm{L}} < 0.6$ which fully covers the parameter range of existing multiplexer devices. We conclude our work with an experimental verification of the model. In particular, we demonstrate a very good agreement between measured multiplexer characteristics and predictions based on our model.
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
Online Demodulation and Trigger for Flux-ramp Modulated SQUID Signals
Authors:
N. Karcher,
T. Muscheid,
T. Wolber,
D. Richter,
C. Enss,
S. Kempf,
O. Sander
Abstract:
Due to the periodic characteristics of SQUIDs, a suitable linearization technique is required for SQUID-based readout. Flux-ramp modulation is a common linearization technique and is typically applied for the readout of a microwave-SQUID-multiplexer as well as since recently also for dc-SQUIDs. Flux-ramp modulation requires another stage in the signal processing chain to demodulate the SQUID outpu…
▽ More
Due to the periodic characteristics of SQUIDs, a suitable linearization technique is required for SQUID-based readout. Flux-ramp modulation is a common linearization technique and is typically applied for the readout of a microwave-SQUID-multiplexer as well as since recently also for dc-SQUIDs. Flux-ramp modulation requires another stage in the signal processing chain to demodulate the SQUID output signal before further processing. For cryogenic microcalorimenters, these events are given by fast exponentially rising and slowly exponentially decaying pulses which shall be detected by a trigger engine and recorded by a storage logic. Since the data rate can be decreased significantly by demodulation and event detection, it is desirable to do both steps on the deployed fast FPGA logic during measurement before passing the data to a general-purpose processor.
In this contribution, we show the implementation of efficient multi-channel flux-ramp demodulation computed at run-time on a SoC-FPGA. Furthermore, a concept and implementation for an online trigger and buffer mechanism with its theoretical trigger loss rates depending on buffer size is presented. Both FPGA modules can be operated with up to 500 MHz clock frequency and can efficiently process 32 channels. Correct functionality and data reduction capability of the modules are demonstrated in measurements utilizing magnetic microcalorimeter irradiated with an Iron-55 source for event generation and read out by a microwave SQUID multiplexer.
△ Less
Submitted 22 October, 2021;
originally announced October 2021.
-
Flux ramp modulation based MHz frequency-division dc-SQUID multiplexer
Authors:
Daniel Richter,
Ludwig Hoibl,
Thomas Wolber,
Nick Karcher,
Andreas Fleischmann,
Christian Enss,
Marc Weber,
Oliver Sander,
Sebastian Kempf
Abstract:
We present a MHz frequency-division dc-SQUID multiplexer that is based on flux ramp modulation and a series array of $N$ identical current-sensing dc-SQUIDs with tightly coupled input coil. By running a periodic, sawtooth-shaped current signal through an additional modulation coil being tightly, but non-uniformly coupled to the individual SQUIDs, the voltage drop across the array changes according…
▽ More
We present a MHz frequency-division dc-SQUID multiplexer that is based on flux ramp modulation and a series array of $N$ identical current-sensing dc-SQUIDs with tightly coupled input coil. By running a periodic, sawtooth-shaped current signal through an additional modulation coil being tightly, but non-uniformly coupled to the individual SQUIDs, the voltage drop across the array changes according to the superposition of the flux-to-voltage characteristics of the individual SQUIDs within each cycle of the modulation signal. In this mode of operation, an input signal injected in the input coil of one of the SQUIDs and being quasi-static within a time frame adds a constant flux offset and leads to a phase shift of the associated SQUID characteristics. The latter is inherently proportional to the input signal and can be inferred by channelizing and down-converting the sampled array output voltage. Using a prototype multiplexer as well as a self-developed high-speed readout electronics for real-time phase determination, we demonstrate the simultaneous readout of four signal sources with MHz bandwidth per channel.
△ Less
Submitted 4 March, 2021; v1 submitted 16 January, 2021;
originally announced January 2021.
-
Specific Heat of Holmium in Gold and Silver at Low Temperatures
Authors:
Matthew Herbst,
Andreas Reifenberger,
Clemens Velte,
Holger Dorrer,
Christoph E. Düllmann,
Christian Enss,
Andreas Fleischmann,
Loredana Gastaldo,
Sebastian Kempf,
Tom Kieck,
Ulli Köster,
Federica Mantegazzini,
Klaus Wendt
Abstract:
The specific heat of dilute alloys of holmium in gold and in silver plays a major role in the optimization of low temperature microcalorimeters with enclosed $^{163}\textrm{Ho}$, such as the ones developed for the neutrino mass experiment ECHo. We investigate alloys with atomic concentrations of $x_\textrm{Ho}=0.01\,\% - 4\,\%$ at temperatures between $10\,\textrm{mK}$ and $800\,\textrm{mK}$. Due…
▽ More
The specific heat of dilute alloys of holmium in gold and in silver plays a major role in the optimization of low temperature microcalorimeters with enclosed $^{163}\textrm{Ho}$, such as the ones developed for the neutrino mass experiment ECHo. We investigate alloys with atomic concentrations of $x_\textrm{Ho}=0.01\,\% - 4\,\%$ at temperatures between $10\,\textrm{mK}$ and $800\,\textrm{mK}$. Due to the large total angular momentum $J=8$ and nuclear spin $I=7/2$ of $\textrm{Ho}^{3+}$ ions, the specific heat of $\underline{\textrm{Au}}\textrm{:Ho}$ and $\underline{\textrm{Ag}}\textrm{:Ho}$ depends on the detailed interplay of various interactions, including contributions from the localized 4f electrons and nuclear contributions via hyperfine splitting. This makes it difficult to accurately determine the specific heat of these materials numerically. Instead, we measure their specific heat by using three experimental set-ups optimized for different concentration and temperature ranges. The results from measurements on six holmium alloys demonstrate that the specific heat of these materials is dominated by a large Schottky anomaly with its maximum at $T\approx 250\,\textrm{mK}$, which we attribute to hyperfine splitting and crystal field interactions. RKKY and dipole-dipole interactions between the holmium atoms cause additional, concentration-dependent effects. With regard to ECHo, we conclude that for typical operating temperatures of $T\leq 20\,\textrm{mK}$, silver holmium alloys with $x_\textrm{Ho}\gtrsim 1\,\%$ are suited best.
△ Less
Submitted 16 October, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
$\textit{Ab initio}$ calculation of the calorimetric electron capture spectrum of $^{163}$Holmium: Intra-atomic decay into bound-states
Authors:
M. Braß,
C. Enss,
L. Gastaldo,
M. W. Haverkort
Abstract:
The determination of the electron neutrino mass by electron capture in $^{163}$Ho relies on a precise understanding of the deexcitation of a core hole after an electron capture event. We here present an \textit{ab intio} calculation of the electron capture spectrum in $^{163}$Ho, including all intra-atomic decay channels into bound-states. We use theoretical methods developed for the calculation o…
▽ More
The determination of the electron neutrino mass by electron capture in $^{163}$Ho relies on a precise understanding of the deexcitation of a core hole after an electron capture event. We here present an \textit{ab intio} calculation of the electron capture spectrum in $^{163}$Ho, including all intra-atomic decay channels into bound-states. We use theoretical methods developed for the calculation of core level spectroscopy on correlated electron compounds. Our comparison critically tests the reality of these theories. We find that relativistic interactions beyond the Dirac equation, i.e. quantum-electro dynamics, only lead to minor shifts of the spectral peaks. The electronic relaxation after an electron capture event due to the changed nuclear potential leads to a mixing of different edges, but due to conservation of angular momentum of each scattered electron, no additional structures emerge. Many-body Coulomb interactions lead to the formation of multiplets and to additional peaks with multiple core-holes due to Auger decay. Multiplets crucially change the appearance of the resonances on a Rydberg energy scale. The additional structures due to Auger decay are, although clearly visible, relatively weak compared to the one core hole states and accidentally far away from the end-point region of the spectrum. As the end-point of the spectrum is effected most by the neutrino mass these additional states do not influence the statistics for determining the neutrino mass directly. The multiplet broadening and Auger shake-up of the main core-level edges do change the apparent line-width and accompanying lifetime of these edges, thereby invalidating experimentally obtained lifetimes at the resonance for regions far away from the resonance.
△ Less
Submitted 18 May, 2018; v1 submitted 2 November, 2017;
originally announced November 2017.
-
Specific heat of K071Na0.29Fe2As2 at very low temperatures
Authors:
A. Reifenberger,
M. Hempel,
P. Vogt,
S. Aswartham,
M. Abdel-Hafiez,
V. Grinenko,
S. Wurmehl,
S. -L. Drechsler,
A. Fleischmann,
C. Enss,
R. Klingeler
Abstract:
A commercially available calorimeter has been used to investigate the specific heat of a high-quality \kn\ single crystal. The addenda heat capacity of the calorimeter is determined in the temperature range $0.02 \, \mathrm{K} \leq T \leq 0.54 \, \mathrm{K}$. The data of the \kn\ crystal imply the presence of a large $T^2$ contribution to the specific heat which gives evidence of $d$-wave order pa…
▽ More
A commercially available calorimeter has been used to investigate the specific heat of a high-quality \kn\ single crystal. The addenda heat capacity of the calorimeter is determined in the temperature range $0.02 \, \mathrm{K} \leq T \leq 0.54 \, \mathrm{K}$. The data of the \kn\ crystal imply the presence of a large $T^2$ contribution to the specific heat which gives evidence of $d$-wave order parameter symmetry in the superconducting state. To improve the measurements, a novel design for a calorimeter with a paramagnetic temperature sensor is presented. It promises a temperature resolution of $ΔT \approx 0.1 \, \mathrm{μK}$ and an addenda heat capacity less than $200 \, \mathrm{pJ/K}$ at $ T < 100 \, \mathrm{mK}$.
△ Less
Submitted 11 May, 2014;
originally announced May 2014.
-
Evidence of d-wave Superconductivity in K_(1-x)Na_xFe_2As_2 (x = 0, 0.1) Single Crystals from Low-Temperature Specific Heat Measurements
Authors:
M. Abdel-Hafiez,
V. Grinenko,
S. Aswartham,
I. Morozov,
M. Roslova,
O. Vakaliuk,
S. Johnston,
D. V. Efremov,
J. van den Brink,
H. Rosner,
M. Kumar,
C. Hess,
S. Wurmehl,
A. U. B. Wolter,
B. Buechner,
E. L. Green,
J. Wosnitza,
P. Vogt,
A. Reifenberger,
C. Enss,
R. Klingeler,
M. Hempel,
S. -L. Drechsler
Abstract:
From the measurement and analysis of the specific heat of high-quality K_(1-x)Na_xFe_2As_2 single crystals we establish the presence of large T^2 contributions with coefficients alpha_sc ~ 30 mJ/mol K^3 at low-T for both x=0 and 0.1. Together with the observed square root field behavior of the specific heat in the superconducting state both findings evidence d-wave superconductivity on almost all…
▽ More
From the measurement and analysis of the specific heat of high-quality K_(1-x)Na_xFe_2As_2 single crystals we establish the presence of large T^2 contributions with coefficients alpha_sc ~ 30 mJ/mol K^3 at low-T for both x=0 and 0.1. Together with the observed square root field behavior of the specific heat in the superconducting state both findings evidence d-wave superconductivity on almost all Fermi surface sheets with an average gap amplitude of Delta_0 in the range of 0.4 - 0.8 meV. The derived Delta_0 and the observed T_c agree well with the values calculated within the Eliashberg theory, adopting a spin-fluctuation mediated pairing in the intermediate coupling regime.
△ Less
Submitted 25 April, 2013; v1 submitted 22 January, 2013;
originally announced January 2013.
-
Low temperature dipolar echo in amorphous dielectrics: Significance of relaxation and decoherence free two level systems
Authors:
Alexander L. Burin,
John M. Leveritt III,
Gudrun Fickenscher,
Andreas Fleischmann,
Christian Schötz,
Mesoomeh Bazrafshan,
Paul Faßl,
Manfred v. Schickfus,
Christian Enss
Abstract:
The nature of dielectric echoes in amorphous solids at low temperatures is investigated. It is shown that at long delay times the echo amplitude is determined by a small subset of two level systems (TLS) having negligible relaxation and decoherence because of their weak coupling to phonons. The echo decay can then be described approximately by power law time dependencies with different powers at t…
▽ More
The nature of dielectric echoes in amorphous solids at low temperatures is investigated. It is shown that at long delay times the echo amplitude is determined by a small subset of two level systems (TLS) having negligible relaxation and decoherence because of their weak coupling to phonons. The echo decay can then be described approximately by power law time dependencies with different powers at times longer and shorter than the typical TLS relaxation time. The theory is applied to recent measurements of two and three pulse dipolar echo in borosilicate glass BK7 and provides a perfect data fit in the broad time and temperature ranges under the assumption that there exist two TLS relaxation mechanisms due to TLS-phonons and TLS-TLS interaction. This interpretation is consistent with the previous experimental and theoretical investigations. Further experiments verifying the theory predictions are suggested.
△ Less
Submitted 14 August, 2012;
originally announced August 2012.
-
Magnetic Field Dependent Coherent Polarization Echoes in Glasses
Authors:
S. Ludwig,
P. Nagel,
S. Hunklinger,
C. Enss
Abstract:
The unexpected finding of a strong magnetic field dependence of the dielectric properties of insulating glasses at very low temperatures has been a puzzling problem since its discovery. Several attempts have been made to explain this striking phenomenon. In order to obtain information on the origin of the magnetic field effects we have studied coherent properties of atomic tunneling systems in g…
▽ More
The unexpected finding of a strong magnetic field dependence of the dielectric properties of insulating glasses at very low temperatures has been a puzzling problem since its discovery. Several attempts have been made to explain this striking phenomenon. In order to obtain information on the origin of the magnetic field effects we have studied coherent properties of atomic tunneling systems in glasses by polarization echo experiments in magnetic fields. Our results clearly favor a model based on the assumption that nuclear quadrupoles play a crucial role for the observed magnetic field dependence.
△ Less
Submitted 9 October, 2002;
originally announced October 2002.
-
Dephasing of Atomic Tunneling by Nuclear Quadrupoles
Authors:
Alois Würger,
Andreas Fleischmann,
Christian Enss
Abstract:
Recent experiments revealed a most surprising magnetic-field dependence of coherent echoes in amorphous solids. We show that a novel dephasing mechanism involving nuclear quadrupole moments is the origin of the observed magnetic-field dependence.
Recent experiments revealed a most surprising magnetic-field dependence of coherent echoes in amorphous solids. We show that a novel dephasing mechanism involving nuclear quadrupole moments is the origin of the observed magnetic-field dependence.
△ Less
Submitted 3 February, 2014; v1 submitted 16 July, 2002;
originally announced July 2002.
-
Evidence for Magnetic Field Induced Changes of the Phase of Tunneling States: Spontaneous Echoes in (KBr)$_{1-x}$(KCN)$_x$ in Magnetic Fields
Authors:
C. Enss,
S. Ludwig
Abstract:
Recently, it has been discovered that in contrast to expectations the low-temperature dielectric properties of some multi-component glasses depend strongly on magnetic fields. In particular, the low-frequency dielectric susceptibility and the amplitude of coherent polarization echoes show striking non-monotonic magnetic field dependencies. The low-temperature dielectric response of these materia…
▽ More
Recently, it has been discovered that in contrast to expectations the low-temperature dielectric properties of some multi-component glasses depend strongly on magnetic fields. In particular, the low-frequency dielectric susceptibility and the amplitude of coherent polarization echoes show striking non-monotonic magnetic field dependencies. The low-temperature dielectric response of these materials is governed by atomic tunneling systems. We now have investigated the coherent properties of tunneling states in a crystalline host in magnetic fields up to 230$ $mT. Two-pulse echo experiments have been performed on a KBr crystal containing about 7.5% CN$^-$. Like in glasses, but perhaps even more surprising in the case of a crystalline system, we observe a very strong magnetic field dependence of the echo amplitude. Moreover, for the first time we have direct evidence that magnetic fields change the phase of coherent tunneling systems in a well-defined way. We present the data and discuss the possible origin of this intriguing effect.
△ Less
Submitted 16 April, 2002;
originally announced April 2002.
-
Influence of Random Internal Fields on the Tunneling of OH Defects in NaCl Crystals
Authors:
M. Thesen,
R. Kühn,
C. Enss,
S. Ludwig
Abstract:
Alkali halide crystals doped with certain impurity ions show a low temperature behaviour, which differs significantly from that of pure crystals. The origin of these characteristic differences are tunneling centers formed by atomic or molecular impurity ions. We have investigated the dielectric susceptibility of hydroxyl ions in NaCl crystals at very low concentrations (below 30 ppm), where inte…
▽ More
Alkali halide crystals doped with certain impurity ions show a low temperature behaviour, which differs significantly from that of pure crystals. The origin of these characteristic differences are tunneling centers formed by atomic or molecular impurity ions. We have investigated the dielectric susceptibility of hydroxyl ions in NaCl crystals at very low concentrations (below 30 ppm), where interactions are believed to be negligible. We find that the temperature dependence of the susceptibility is noticeably different from what one would expect for isolated defects in a symmetric environment. We propose that the origin of these deviations are random internal strains arising from imperfections of the host crystal. We will present the experimental data and a theoretical model which allows a quantitative understanding on a microscopic basis.
△ Less
Submitted 10 October, 2001;
originally announced October 2001.
-
Magnetic Field Dependent Tunneling in Glasses
Authors:
P. Strehlow,
M. Wohlfahrt,
A. G. M. Janssen,
R. Haueisen,
G. Weiss,
C. Enss,
S. Hunklinger
Abstract:
We report on experiments giving evidence for quantum effects of electromagnetic flux in barium alumosilicate glass. In contrast to expectation, below 100 mK the dielectric response becomes sensitive to magnetic fields. The experimental findings include both, the complete lifting of the dielectric saturation by weak magnetic fields and oscillations of the dielectric response in the low temperatur…
▽ More
We report on experiments giving evidence for quantum effects of electromagnetic flux in barium alumosilicate glass. In contrast to expectation, below 100 mK the dielectric response becomes sensitive to magnetic fields. The experimental findings include both, the complete lifting of the dielectric saturation by weak magnetic fields and oscillations of the dielectric response in the low temperature resonant regime. As origin of these effects we suggest that the magnetic induction field violates the time reversal invariance leading to a flux periodicity in the energy levels of tunneling systems. At low temperatures, this effect is strongly enhanced by the interaction between tunneling systems and thus becomes measurable.
△ Less
Submitted 29 September, 1999;
originally announced September 1999.
-
Evidence for a Second Order Phase Transition in Glasses at Very Low Temperatures -- A Macroscopic Quantum State of Tunneling Systems
Authors:
P. Strehlow,
C. Enss,
S. Hunklinger
Abstract:
Dielectric measurements at very low temperature indicate that in a glass with the eutectic composition BaO-Al$_2$O$_3$-SiO$_2$ a phase transition occurs at 5.84 mK. Below that temperature small magnetic fields of the order of 10 $μ$T cause noticeable changes of the dielectric constant although the glass is insensitive to fields up to 20 T above 10 mK. The experimental findings may be interpreted…
▽ More
Dielectric measurements at very low temperature indicate that in a glass with the eutectic composition BaO-Al$_2$O$_3$-SiO$_2$ a phase transition occurs at 5.84 mK. Below that temperature small magnetic fields of the order of 10 $μ$T cause noticeable changes of the dielectric constant although the glass is insensitive to fields up to 20 T above 10 mK. The experimental findings may be interpreted as the signature of the formation of a new phase in which many tunneling systems perform a coherent motion resulting in a macroscopic wave function.
△ Less
Submitted 31 December, 1997;
originally announced December 1997.
