-
Mechanical mode imaging of a high-Q hybrid hBN/Si$_3$N$_4$ resonator
Authors:
David Jaeger,
Francesco Fogliano,
Thibaud Ruelle,
Aris Lafranca,
Floris Braakman,
Martino Poggio
Abstract:
We image and characterize the mechanical modes of a 2D drum resonator made of hBN suspended over a high-stress Si$_3$N$_4$ membrane. Our measurements demonstrate hybridization between various modes of the hBN resonator and those of the Si$_3$N$_4$ membrane. The measured resonance frequencies and spatial profiles of the modes are consistent with finite-element simulations based on an idealized geom…
▽ More
We image and characterize the mechanical modes of a 2D drum resonator made of hBN suspended over a high-stress Si$_3$N$_4$ membrane. Our measurements demonstrate hybridization between various modes of the hBN resonator and those of the Si$_3$N$_4$ membrane. The measured resonance frequencies and spatial profiles of the modes are consistent with finite-element simulations based on an idealized geometry. Spectra of the thermal motion reveal that, depending on the degree of hybridization with modes of the heavier and higher-quality-factor Si$_3$N$_4$ membrane, the quality factors and the motional mass of the hBN drum modes can be shifted by orders of magnitude. This effect could be exploited to engineer hybrid drum/membrane modes that combine the low motional mass of 2D materials with the high quality factor of Si$_3$N$_4$ membranes for optomechanical or sensing applications.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
A tunable fiber Fabry-Perot cavity for hybrid optomechanics stabilized at 4 K
Authors:
Thibaud Ruelle,
David Jaeger,
Francesco Fogliano,
Floris Braakman,
Martino Poggio
Abstract:
We describe an apparatus for the implementation of hybrid optomechanical systems at 4 K. The platform is based on a high-finesse, micrometer-scale fiber Fabry-Perot cavity, which can be widely tuned using piezoelectric positioners. A mechanical resonator can be positioned within the cavity in the object-in-the-middle configuration by a second set of positioners. A high level of stability is achiev…
▽ More
We describe an apparatus for the implementation of hybrid optomechanical systems at 4 K. The platform is based on a high-finesse, micrometer-scale fiber Fabry-Perot cavity, which can be widely tuned using piezoelectric positioners. A mechanical resonator can be positioned within the cavity in the object-in-the-middle configuration by a second set of positioners. A high level of stability is achieved without sacrificing either performance or tunability, through the combination of a stiff mechanical design, passive vibration isolation, and an active Pound-Drever-Hall feedback lock incorporating a reconfigurable digital filter. The stability of the cavity length is demonstrated to be better than a few picometers over many hours both at room temperature and at 4 K.
△ Less
Submitted 6 May, 2022;
originally announced May 2022.
-
Ultrasensitive nano-optomechanical force sensor at dilution temperatures
Authors:
Francesco Fogliano,
Benjamin Besga,
Antoine Reigue,
Laure Mercier de Lépinay,
Philip Heringlake,
Clement Gouriou,
Eric Eyraud,
Wolfgang Wernsdorfer,
Benjamin Pigeau,
Olivier Arcizet
Abstract:
Cooling down nanomechanical force probes is a generic strategy to enhance their sensitivities through the concomitant reduction of their thermal noise and mechanical damping rates. However, heat conduction mechanisms become less efficient at low temperatures, which renders difficult to ensure and verify their proper thermalization. To operate with minimally perturbing measurements, we implement op…
▽ More
Cooling down nanomechanical force probes is a generic strategy to enhance their sensitivities through the concomitant reduction of their thermal noise and mechanical damping rates. However, heat conduction mechanisms become less efficient at low temperatures, which renders difficult to ensure and verify their proper thermalization. To operate with minimally perturbing measurements, we implement optomechanical readout techniques operating in the photon counting regime to probe the dynamics of suspended silicon carbide nanowires in a dilution refrigerator. Readout of their vibrations is realized with sub-picowatt optical powers, in a regime where less than one photon is collected per oscillation period. We demonstrate their thermalization down to $32\pm2$ mK and report on record sensitivities for scanning probe force sensors, at the $40\,\rm zN/Hz^{1/2}$ level, with a sensitivity to lateral force field gradients in the fN/m range. This work opens the road toward nanomechanical vectorial imaging of faint forces at dilution temperatures, at minimal excitation levels.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
