-
Gelation and Re-entrance in Mixtures of Soft Colloids and Linear Polymers of Equal Size
Authors:
D. Parisi,
D. Truzzolillo,
A. H. Slim,
P. Dieudonné-George,
S. Narayanan,
J. C. Conrad,
V. D. Deepak,
M. Gauthier,
D. Vlassopoulos
Abstract:
Liquid mixtures composed of colloidal particles and much smaller non-adsorbing linear homopolymers can undergo a gelation transition due to polymer-mediated depletion forces. We now show that the addition of linear polymers to suspensions of soft colloids having the same hydrodynamic size yields a liquid-to-gel-to-re-entrant liquid transition. In particular, the dynamic state diagram of 1,4-polybu…
▽ More
Liquid mixtures composed of colloidal particles and much smaller non-adsorbing linear homopolymers can undergo a gelation transition due to polymer-mediated depletion forces. We now show that the addition of linear polymers to suspensions of soft colloids having the same hydrodynamic size yields a liquid-to-gel-to-re-entrant liquid transition. In particular, the dynamic state diagram of 1,4-polybutadiene star-linear polymer mixtures was determined with the help of linear viscoelastic and small angle X-ray scattering experiments. While keeping the star polymers below their nominal overlap concentration, a gel was formed upon increasing the linear polymer content. Further addition of linear chains yielded a re-entrant liquid. This unexpected behavior was rationalized by the interplay of three possible phenomena: (i) depletion interactions, driven by the size disparity between the stars and the polymer length scale which is the mesh size of this entanglement network; (ii) colloidal deswelling due to the increased osmotic pressure exerted onto the stars; and (iii) a concomitant progressive suppression of depletion efficiency on increasing polymer concentration due to reduced mesh size, hence a smaller range of attraction. Our results unveil an exciting new way to tailor the flow of soft colloids and highlight a largely unexplored path to engineer soft colloidal mixtures.
△ Less
Submitted 2 February, 2023; v1 submitted 12 December, 2022;
originally announced December 2022.
-
Prediction of Large Magnetic Moment Materials With Graph Neural Networks and Random Forests
Authors:
Sékou-Oumar Kaba,
Benjamin Groleau-Paré,
Marc-Antoine Gauthier,
André-Marie Tremblay,
Simon Verret,
Chloé Gauvin-Ndiaye
Abstract:
Magnetic materials are crucial components of many technologies that could drive the ecological transition, including electric motors, wind turbine generators and magnetic refrigeration systems. Discovering materials with large magnetic moments is therefore an increasing priority. Here, using state-of-the-art machine learning methods, we scan the Inorganic Crystal Structure Database (ICSD) of hundr…
▽ More
Magnetic materials are crucial components of many technologies that could drive the ecological transition, including electric motors, wind turbine generators and magnetic refrigeration systems. Discovering materials with large magnetic moments is therefore an increasing priority. Here, using state-of-the-art machine learning methods, we scan the Inorganic Crystal Structure Database (ICSD) of hundreds of thousands of existing materials to find those that are ferromagnetic and have large magnetic moments. Crystal graph convolutional neural networks (CGCNN), materials graph network (MEGNet) and random forests are trained on the Materials Project database that contains the results of high-throughput DFT predictions. For random forests, we use a stochastic method to select nearly one hundred relevant descriptors based on chemical composition and crystal structure. This gives results that are comparable to those of neural networks. The comparison between these different machine learning approaches gives an estimate of the errors for our predictions on the ICSD database. Validating our final predictions by comparisons with available experimental data, we found 15 materials that are likely to have large magnetic moments and have not been yet studied experimentally.
△ Less
Submitted 17 April, 2023; v1 submitted 29 November, 2021;
originally announced November 2021.
-
Transition from confined to bulk dynamics in symmetric star-linear polymer mixtures
Authors:
Daniele Parisi,
Domenico Truzzolillo,
Vishnu D. Deepak,
Mario Gauthier,
Dimitris Vlassopoulos
Abstract:
We report on the linear viscoelastic properties of mixtures comprising multiarm star (as model soft colloids) and long linear chain homopolymers in a good solvent. In contrast to earlier works, we investigated symmetric mixtures (with a size ratio of 1) and showed that the polymeric and colloidal responses can be decoupled. The adopted experimental protocol involved probing the linear chain dynami…
▽ More
We report on the linear viscoelastic properties of mixtures comprising multiarm star (as model soft colloids) and long linear chain homopolymers in a good solvent. In contrast to earlier works, we investigated symmetric mixtures (with a size ratio of 1) and showed that the polymeric and colloidal responses can be decoupled. The adopted experimental protocol involved probing the linear chain dynamics in different star environments. To this end, we studied mixtures with different star mass fraction, which was kept constant while linear chains were added and their entanglement plateau modulus ($G_p$) and terminal relaxation time ($τ_d$) were measured as functions of their concentration. Two distinct scaling regimes were observed for both $G_p$ and $τ_d$: at low linear polymer concentrations, a weak concentration dependence was observed, that became even weaker as the fraction of stars in the mixtures increased into the star glassy regime. On the other hand, at higher linear polymer concentrations, the classical entangled polymer scaling was recovered. Simple scaling arguments show that the threshold crossover concentration between the two regimes corresponds to the maximum osmotic star compression and signals the transition from confined to bulk dynamics. These results provide the needed ingredients to complete the state diagram of soft colloid-polymer mixtures and investigate their dynamics at large polymer-colloid size ratios. They also offer an alternative way to explore aspects of the colloidal glass transition and the polymer dynamics in confinement. Finally, they provide a new avenue to tailor the rheology of soft composites.
△ Less
Submitted 10 February, 2019;
originally announced February 2019.
-
Crystal-to-crystal transition of ultrasoft colloids under shear
Authors:
J. Ruiz-Franco,
J. Marakis,
N. Gnan,
J. Kohlbrecher,
M. Gauthier,
M. P. Lettinga,
D. Vlassopoulos,
E. Zaccarelli
Abstract:
Ultrasoft colloids typically do not spontaneously crystallize, but rather vitrify, at high concentrations. Combining in-situ rheo-SANS experiments and numerical simulations we show that shear facilitates crystallization of colloidal star polymers in the vicinity of their glass transition. With increasing shear rate well beyond rheological yielding, a transition is found from an initial bcc-dominat…
▽ More
Ultrasoft colloids typically do not spontaneously crystallize, but rather vitrify, at high concentrations. Combining in-situ rheo-SANS experiments and numerical simulations we show that shear facilitates crystallization of colloidal star polymers in the vicinity of their glass transition. With increasing shear rate well beyond rheological yielding, a transition is found from an initial bcc-dominated structure to an fcc-dominated one. This crystal-to-crystal transition is not accompanied by intermediate melting but occurs via a sudden reorganization of the crystal structure. Our results provide a new avenue to tailor colloidal crystallization and crystal-to-crystal transition at molecular level by coupling softness and shear.
△ Less
Submitted 12 December, 2017;
originally announced December 2017.
-
Thermodynamic properties of liquid mercury to 520 K and 7 GPa from acoustic velocity measurements
Authors:
Simon Ayrinhac,
Michel Gauthier,
Livia E. Bove,
Marc Morand,
Gilles Le Marchand,
Frédéric Bergame,
Frédéric Decremps
Abstract:
Ultrafast acoustics measurements on liquid mercury have been performed at high pressure and temperature in diamond anvils cell using picosecond acoustic interferometry. We extract the density of mercury from adiabatic sound velocities using a numerical iterative procedure. The pressure and temperature dependence of the thermal expansion, the isothermal compressibilty, the isothermal bulk modulus a…
▽ More
Ultrafast acoustics measurements on liquid mercury have been performed at high pressure and temperature in diamond anvils cell using picosecond acoustic interferometry. We extract the density of mercury from adiabatic sound velocities using a numerical iterative procedure. The pressure and temperature dependence of the thermal expansion, the isothermal compressibilty, the isothermal bulk modulus and its pressure derivative are derived up to 7 GPa and 520 K. In the high pressure regime, the sound velocity values, at a given density, are shown to be only slightly dependent on the specific temperature and pressure conditions. The density dependence of sound velocity at low density is consistent with that observed with our data at high density in the metallic liquid state.
△ Less
Submitted 23 October, 2013;
originally announced October 2013.
-
Structural and optical studies of FeSb2 under high pressure
Authors:
Claudio Michel Poffo,
Sergio Michielon de Souza,
Daniela Menegon Trichês,
João Cardoso de Lima,
Tarciso Antonio Grandi,
Alain Polian,
Michel Gauthier
Abstract:
Nanostructured orthorhombic FeSb2 and an amorphous phase were formed by mechanical alloying starting from a mixture of high purity elemental Fe and Sb powders. The effects of high pressures on structural and optical properties were studied using X-ray diffraction (XRD) and Raman spectroscopy (RS). XRD patterns showed the presence of the orthorhombic FeSb2 phase up to the maximum pressure applied (…
▽ More
Nanostructured orthorhombic FeSb2 and an amorphous phase were formed by mechanical alloying starting from a mixture of high purity elemental Fe and Sb powders. The effects of high pressures on structural and optical properties were studied using X-ray diffraction (XRD) and Raman spectroscopy (RS). XRD patterns showed the presence of the orthorhombic FeSb2 phase up to the maximum pressure applied (28.2 GPa). The XRD patterns showed also an increase in the amount of the amorphous phase with increasing pressure up to 23.3 GPa. At 14.3 GPa, together with the former phases, a new phase was observed and indexed to a tetragonal FeSb2 phase, but its volume fraction is small at least up to 23.3 GPa. For the orthorhombic FeSb2 phase, the pressure dependence of the volume fitted to a Birch-Murnaghan equation of state gave a bulk modulus = 74.2 +- 3.0 GPa and its pressure derivative = 7.5 +- 0.6. RS measurements were performed from atmospheric pressure up to 45.2 GPa. For the orthorhombic FeSb2 phase, the Raman active mode was observed up to the maximum pressure applied, while the mode disappeared at 16.6 GPa. For pressures higher than 21 GPa, the Raman active mode of a tetragonal FeSb2 phase was observed, confirming ab initio calculations reported in the literature.
△ Less
Submitted 2 December, 2011;
originally announced December 2011.
-
New pressure-induced monoclinic β-Sb2Te3 phase with sevenfold symmetry
Authors:
Sergio Michielon de Souza,
Daniela Menegon Trichês,
Claudio Michel Poffo,
João Cardoso de Lima,
Tarciso Antonio Grandi,
Alain Polian,
Michel Gauthier
Abstract:
A nanometric Sb2Te3 rhombohedral phase was produced from Sb and Te by mechanical alloying for 3 hours and its structural stability was studied by synchrotron X-ray diffraction (XRD) and Raman spectroscopy (RS) measurements as a function of pressure. A phase transformation from the ambient pressure rhombohedral phase into a β-Sb2Te3 monoclinic structure between 9.8 and 13.2 GPa is observed by XRD.…
▽ More
A nanometric Sb2Te3 rhombohedral phase was produced from Sb and Te by mechanical alloying for 3 hours and its structural stability was studied by synchrotron X-ray diffraction (XRD) and Raman spectroscopy (RS) measurements as a function of pressure. A phase transformation from the ambient pressure rhombohedral phase into a β-Sb2Te3 monoclinic structure between 9.8 and 13.2 GPa is observed by XRD. This phase transformation is confirmed by the Raman spectroscopy measurements. The pressure dependence of the volume fited to a Birch-Murnaghan equation of state gives a bulk modulus B0 = 40.6 +- 1.5 GPa and B'0 = 5.1 +- 0.6. The bulk modulus of the nano-Sb2Te3 seems to be slightly smaller than that for its bulk counterpart (44.8 GPa).
△ Less
Submitted 5 May, 2011;
originally announced May 2011.
-
Equation of State, Stability, Anisotropy and Nonlinear Elasticity of Diamond-Cubic (ZB) Silicon by Phonon Imaging at High Pressure
Authors:
F. Decremps,
L. Belliard,
M. Gauthier,
B. Perrin
Abstract:
Experimental phonon imaging in diamond anvils cell is demonstrated to be an adequate tool to extract the complete set of elastic constants of single-crystalline silicon up to the ZB$\rightarrow β-$Sn transition (10 GPa). Contrary to what was commonly admitted, we demonstrate that the development of the strain-energy density in terms of strains cannot be stopped, for silicon, after the terms contai…
▽ More
Experimental phonon imaging in diamond anvils cell is demonstrated to be an adequate tool to extract the complete set of elastic constants of single-crystalline silicon up to the ZB$\rightarrow β-$Sn transition (10 GPa). Contrary to what was commonly admitted, we demonstrate that the development of the strain-energy density in terms of strains cannot be stopped, for silicon, after the terms containing the third-order elastic constants. Nonlinear elasticity, degree of anisotropy and pressure-induced mechanical stability of the cubic silicon structure are thus revisited and investigated in more detail.
△ Less
Submitted 16 July, 2010;
originally announced July 2010.
-
Sound velocity and absorption measurements under high pressure using picosecond ultrasonics in diamond anvil cell. Application to the stability study of AlPdMn
Authors:
Frederic Decremps,
Laurent Belliard,
Bernard Perrin,
Michel Gauthier
Abstract:
We report an innovative high pressure method combining the diamond anvil cell device with the technique of picosecond ultrasonics. Such an approach allows to accurately measure sound velocity and attenuation of solids and liquids under pressure of tens of GPa, overcoming all the drawbacks of traditional techniques. The power of this new experimental technique is demonstrated in studies of lattic…
▽ More
We report an innovative high pressure method combining the diamond anvil cell device with the technique of picosecond ultrasonics. Such an approach allows to accurately measure sound velocity and attenuation of solids and liquids under pressure of tens of GPa, overcoming all the drawbacks of traditional techniques. The power of this new experimental technique is demonstrated in studies of lattice dynamics, stability domain and relaxation process in a metallic sample, a perfect single-grain AlPdMn quasicrystal, and rare gas, neon and argon. Application to the study of defect-induced lattice stability in AlPdMn up to 30 GPa is proposed. The present work has potential for application in areas ranging from fundamental problems in physics of solid and liquid state, which in turn could be beneficial for various other scientific fields as Earth and planetary science or material research.
△ Less
Submitted 17 July, 2007;
originally announced July 2007.
-
Bond-bending modes and stability of tetrahedral semiconductors under high pressure: a puzzle of AlN
Authors:
E. V. Iakovenko,
M. Gauthier,
A. Polian
Abstract:
Lattice vibrations of the wurtzite-type AlN have been studied by Raman spectroscopy under high pressure up to the structural phase transition at 20 GPa. We have shown that the widely debated bond-bending E_2^1 mode of w-AlN has an abnormal positive pressure shift up to the threshold of the phase transition, whereas in many tetrahedral semiconductors the bond-bending modes soften on compression.…
▽ More
Lattice vibrations of the wurtzite-type AlN have been studied by Raman spectroscopy under high pressure up to the structural phase transition at 20 GPa. We have shown that the widely debated bond-bending E_2^1 mode of w-AlN has an abnormal positive pressure shift up to the threshold of the phase transition, whereas in many tetrahedral semiconductors the bond-bending modes soften on compression. This finding disagrees with the results of ab initio calculations, which give a "normal" negative pressure shift. Combination of high dynamical and low thermodynamical stability of AlN breaks the correlation between the mode Gruneisen parameters for the bond-bending modes and the transition pressure, which holds for CdS, InP, ZnO, ZnTe, ZnSe, ZnS, Ge, Si, GaP, GaN, SiC and BeO.
△ Less
Submitted 5 January, 2003;
originally announced January 2003.
