-
Modeling the amorphous structure of a mechanically alloyed Ti50Ni25Cu25 alloy using anomalous wide-angle x-ray scattering and reverse Monte Carlo simulations
Authors:
João Cardoso de Lima,
Claudio Michel Poffo,
Sergio Michielon de Souza,
Kleber Daum Machado,
Daniela Menegon Trichês,
Tarciso Antonio Grandi,
Ronaldo Sergio de Biasi
Abstract:
An amorphous Ti50Ni25Cu25 alloy was produced by 19 h of mechanical alloying. Anomalous wide angle x-ray scattering data were collected at six energies and six total scattering factors were obtained. By considering the data collected at two energies close to the Ni and Cu K edges, two differential anomalous scattering factors around the Ni and Cu atoms were obtained, showing the chemical environmen…
▽ More
An amorphous Ti50Ni25Cu25 alloy was produced by 19 h of mechanical alloying. Anomalous wide angle x-ray scattering data were collected at six energies and six total scattering factors were obtained. By considering the data collected at two energies close to the Ni and Cu K edges, two differential anomalous scattering factors around the Ni and Cu atoms were obtained, showing the chemical environments around these atoms are different. The eight factors were used as input data to the reverse Monte Carlo method used to compute the partial structure factors STi-Ti(K), STi-Cu(K), STi-Ni(K), SCu-Cu(K), SCu-Ni(K) and SNi-Ni(K). From their Fourier transformation, the partial pair distribution functions GTi-Ti(r), GTi-Cu(r), GTi-Ni(r), GCu-Cu(r), GCu-Ni(r) and GNi-Ni(r) were obtained, and the coordination numbers and interatomic atomic distances for the first neighbors were determined.
△ Less
Submitted 16 April, 2013;
originally announced April 2013.
-
Structural and optical studies of FeSb2 under high pressure
Authors:
Claudio Michel Poffo,
Sergio Michielon de Souza,
Daniela Menegon Trichês,
João Cardoso de Lima,
Tarciso Antonio Grandi,
Alain Polian,
Michel Gauthier
Abstract:
Nanostructured orthorhombic FeSb2 and an amorphous phase were formed by mechanical alloying starting from a mixture of high purity elemental Fe and Sb powders. The effects of high pressures on structural and optical properties were studied using X-ray diffraction (XRD) and Raman spectroscopy (RS). XRD patterns showed the presence of the orthorhombic FeSb2 phase up to the maximum pressure applied (…
▽ More
Nanostructured orthorhombic FeSb2 and an amorphous phase were formed by mechanical alloying starting from a mixture of high purity elemental Fe and Sb powders. The effects of high pressures on structural and optical properties were studied using X-ray diffraction (XRD) and Raman spectroscopy (RS). XRD patterns showed the presence of the orthorhombic FeSb2 phase up to the maximum pressure applied (28.2 GPa). The XRD patterns showed also an increase in the amount of the amorphous phase with increasing pressure up to 23.3 GPa. At 14.3 GPa, together with the former phases, a new phase was observed and indexed to a tetragonal FeSb2 phase, but its volume fraction is small at least up to 23.3 GPa. For the orthorhombic FeSb2 phase, the pressure dependence of the volume fitted to a Birch-Murnaghan equation of state gave a bulk modulus = 74.2 +- 3.0 GPa and its pressure derivative = 7.5 +- 0.6. RS measurements were performed from atmospheric pressure up to 45.2 GPa. For the orthorhombic FeSb2 phase, the Raman active mode was observed up to the maximum pressure applied, while the mode disappeared at 16.6 GPa. For pressures higher than 21 GPa, the Raman active mode of a tetragonal FeSb2 phase was observed, confirming ab initio calculations reported in the literature.
△ Less
Submitted 2 December, 2011;
originally announced December 2011.
-
New pressure-induced monoclinic β-Sb2Te3 phase with sevenfold symmetry
Authors:
Sergio Michielon de Souza,
Daniela Menegon Trichês,
Claudio Michel Poffo,
João Cardoso de Lima,
Tarciso Antonio Grandi,
Alain Polian,
Michel Gauthier
Abstract:
A nanometric Sb2Te3 rhombohedral phase was produced from Sb and Te by mechanical alloying for 3 hours and its structural stability was studied by synchrotron X-ray diffraction (XRD) and Raman spectroscopy (RS) measurements as a function of pressure. A phase transformation from the ambient pressure rhombohedral phase into a β-Sb2Te3 monoclinic structure between 9.8 and 13.2 GPa is observed by XRD.…
▽ More
A nanometric Sb2Te3 rhombohedral phase was produced from Sb and Te by mechanical alloying for 3 hours and its structural stability was studied by synchrotron X-ray diffraction (XRD) and Raman spectroscopy (RS) measurements as a function of pressure. A phase transformation from the ambient pressure rhombohedral phase into a β-Sb2Te3 monoclinic structure between 9.8 and 13.2 GPa is observed by XRD. This phase transformation is confirmed by the Raman spectroscopy measurements. The pressure dependence of the volume fited to a Birch-Murnaghan equation of state gives a bulk modulus B0 = 40.6 +- 1.5 GPa and B'0 = 5.1 +- 0.6. The bulk modulus of the nano-Sb2Te3 seems to be slightly smaller than that for its bulk counterpart (44.8 GPa).
△ Less
Submitted 5 May, 2011;
originally announced May 2011.
-
Reverse Monte Carlo Simulations and Raman Scattering of an Amorphous GeSe$_4$ Alloy Produced by Mechanical Alloying
Authors:
K. D. Machado,
J. C. de Lima,
C. E. M. Campos,
T. A. Grandi,
P. S. Pizani
Abstract:
The short and intermediate range order of an amorphous GeSe$_4$ alloy produced by Mechanical Alloying were studied by Reverse Monte Carlo simulations of its x-ray total structure factor and Raman scattering. The simulations were used to compute the $G^{\text{RMC}}_{\text{Ge-Ge}}(r)$, $G^{\text{RMC}}_{\text{Ge-Se}}(r)$ and $G^{\text{RMC}}_{\text{Se-Se}}(r)$ partial distribution functions and the…
▽ More
The short and intermediate range order of an amorphous GeSe$_4$ alloy produced by Mechanical Alloying were studied by Reverse Monte Carlo simulations of its x-ray total structure factor and Raman scattering. The simulations were used to compute the $G^{\text{RMC}}_{\text{Ge-Ge}}(r)$, $G^{\text{RMC}}_{\text{Ge-Se}}(r)$ and $G^{\text{RMC}}_{\text{Se-Se}}(r)$ partial distribution functions and the ${\cal S}^{\text{RMC}}_{\text{Ge-Ge}}(K)$, ${\cal S}^{\text{RMC}}_{\text{Ge-Se}}(K)$ and ${\cal S}^{\text{RMC}}_{\text{Se-Se}}(K)$ partial structure factors. We calculated the coordination numbers and interatomic distances for the first and second neighbors and the bond-angle distribution functions $Θ_{ijl}(\cosθ)$. The data obtained indicate that the structure of the alloy has important differences when compared to alloys prepared by other techniques. There are a high number of Se-Se pairs in the first shell, and some of the tetrahedral units formed seemed to be connected by Se-Se bridges.
△ Less
Submitted 31 January, 2004;
originally announced February 2004.
-
Magnetic properties of amorphous Co$_x$Nb$_{100-x}$ alloys produced by mechanical alloying
Authors:
K. D. Machado,
R. C. da Silva,
J. C. de Lima,
T. A. Grandi,
A. A. M. Gasperini,
C. E. M. Campos
Abstract:
Three amorphous Co$_x$Nb$_{100-x}$ alloys, Co$_{25}$Nb$_{75}$, Co$_{57}$Nb$_{43}$ and Co$_{80}$Nb$_{20}$, were produced by Mechanical Alloying starting from the elemental powders. Their magnetic properties were determined using an alternating gradient force magnetometer (AGFM), and the remanent magnetizations, saturation fields and coercive fields were obtained from the hysteresis loop. The allo…
▽ More
Three amorphous Co$_x$Nb$_{100-x}$ alloys, Co$_{25}$Nb$_{75}$, Co$_{57}$Nb$_{43}$ and Co$_{80}$Nb$_{20}$, were produced by Mechanical Alloying starting from the elemental powders. Their magnetic properties were determined using an alternating gradient force magnetometer (AGFM), and the remanent magnetizations, saturation fields and coercive fields were obtained from the hysteresis loop. The alloys have a relatively high saturation field, which decreases as the composition becomes richer in Co. The coercivity and remanent magnetization reach an optimal value around 57% at.Co, making {\em a}-Co$_{57}$Nb$_{43}$ the hardest magnetic material among the three alloys. Further addition of Co produces a soft alloy.
△ Less
Submitted 31 January, 2004;
originally announced February 2004.
-
Comparison among the local atomic order of amorphous TM-Ti alloys (TM=Co, Ni, Cu) produced by Mechanical Alloying studied by EXAFS
Authors:
K. D. Machado,
J. C. de Lima,
C. E. M. Campos,
T. A. Grandi
Abstract:
We have investigated the local atomic structure of amorphous TM-Ti alloys (TM = Co, Ni, Cu) produced by Mechanical Alloying by means of EXAFS analyses on TM and Ti K-edges. Coordination numbers and interatomic distances for the four alloys where found and compared. EXAFS results obtained indicated a shortening in the unlike pairs TM-Ti as the difference between $d$ electrons of TM and Ti atoms i…
▽ More
We have investigated the local atomic structure of amorphous TM-Ti alloys (TM = Co, Ni, Cu) produced by Mechanical Alloying by means of EXAFS analyses on TM and Ti K-edges. Coordination numbers and interatomic distances for the four alloys where found and compared. EXAFS results obtained indicated a shortening in the unlike pairs TM-Ti as the difference between $d$ electrons of TM and Ti atoms increases, suggesting an increase in the chemical short range order (CSRO) from TM = Co to Cu.
△ Less
Submitted 31 January, 2004;
originally announced February 2004.
-
Structural study of Cu$_{2-x}$Se alloys produced by mechanical alloying
Authors:
K. D. Machado,
J. C. de Lima,
T. A. Grandi,
A. A. M. Gasperini,
C. E. Maurmann,
S. M. Souza,
C. E. M. Campos,
A. F. Pimenta
Abstract:
The crystalline structures of superionic high temperature copper selenides Cu$_{2-x}$Se ($0 \le x \le 0.25$) produced by Mechanical Alloying were investigated using X-ray diffraction (XRD) technique. The measured XRD patterns showed the presence of the peaks corresponding to the crystalline superionic high temperature $α$-Cu$_2$Se phase in the as-milled sample, and its structural data were deter…
▽ More
The crystalline structures of superionic high temperature copper selenides Cu$_{2-x}$Se ($0 \le x \le 0.25$) produced by Mechanical Alloying were investigated using X-ray diffraction (XRD) technique. The measured XRD patterns showed the presence of the peaks corresponding to the crystalline superionic high temperature $α$-Cu$_2$Se phase in the as-milled sample, and its structural data were determined by means of a Rietveld refinement procedure. After a heat treatment in argon at 200$^\circ$C for 90 h, this phase transforms to the superionic high temperature $α$-Cu$_{1.8}$Se phase, whose structural data where also determined through the Rietveld refinement. In this phase, a very low occupation of the trigonal 32(f) sites ($\sim 3$%) by Cu ions is found. In order to explain the evolution of the phases in the samples, two possible mechanisms are suggested: the high mobility of Cu ions in superionic phases and the intense diffusive processes in the interfacial component of samples produced by Mechanical Alloying.
△ Less
Submitted 31 January, 2004;
originally announced February 2004.
-
EXAFS and XRD studies of an amorphous Co$_{57}$Ti$_{43}$ alloy produced by mechanical alloying
Authors:
K. D. Machado,
J. C. de Lima,
C. E. M. Campos,
T. A. Grandi,
A. A. M. Gasperini
Abstract:
We have investigated the local atomic structure of an amorphous Co$_{57}$Ti$_{43}$ alloy produced by Mechanical Alloying by means of x-ray diffraction and EXAFS analyses on Co and Ti K-edges. Coordination numbers and interatomic distances where found and compared with those determined using an additive hard sphere (AHS) model associated with a RDF$(r)$ deconvolution, and also with data from bcc-…
▽ More
We have investigated the local atomic structure of an amorphous Co$_{57}$Ti$_{43}$ alloy produced by Mechanical Alloying by means of x-ray diffraction and EXAFS analyses on Co and Ti K-edges. Coordination numbers and interatomic distances where found and compared with those determined using an additive hard sphere (AHS) model associated with a RDF$(r)$ deconvolution, and also with data from bcc-Co$_2$Ti compound. The EXAFS results obtained indicated a shortening in the Co-Ti and Ti-Ti distances when compared to those found by the AHS-RDF method and an increase in the Co-Co and Ti-Ti distances and a large shortening in the Co-Ti one when compared to the distances found in the bcc-Co$_2$Ti compound. In spite of these differences, coordination numbers obtained from EXAFS and AHS-RDF are similar to each other and also to those found in bcc-Co$_2$Ti.
△ Less
Submitted 1 February, 2004; v1 submitted 15 July, 2003;
originally announced July 2003.
-
EXAFS, XRD and RMC studies of an Amorphous Ga$_{50}$Se$_{50}$ Alloy Produced by Mechanical Alloying
Authors:
K. D. Machado,
P. Jóvári,
J. C. de Lima,
C. E. M. Campos,
T. A. Grandi
Abstract:
The local atomic order of an amorphous Ga$_{50}$Se$_{50}$ alloy produced by Mechanical Alloying (MA) was studied by the Extended X-ray Absorption Fine Structure (EXAFS) and X-ray Diffraction (XRD) techniques and by Reverse Monte Carlo (RMC) simulations of its total x-ray structure factor. The coordination numbers and interatomic distances for the first neighbors were determined by means of EXAFS…
▽ More
The local atomic order of an amorphous Ga$_{50}$Se$_{50}$ alloy produced by Mechanical Alloying (MA) was studied by the Extended X-ray Absorption Fine Structure (EXAFS) and X-ray Diffraction (XRD) techniques and by Reverse Monte Carlo (RMC) simulations of its total x-ray structure factor. The coordination numbers and interatomic distances for the first neighbors were determined by means of EXAFS analysis and RMC simulations. The RMC simulations also furnished the partial pair distribution functions $G^{\text{RMC}}_{\text{Ga-Ga}}(r)$, $G^{\text{RMC}}_{\text{Ga-Se}}(r)$ and $G^{\text{RMC}}_{\text{Se-Se}}(r)$. The results obtained indicated that there are important differences among the local structure of the amorphous Ga$_{50}$Se$_{50}$ alloy produced by MA and those of the corresponding crystals, since there are Se-Se pairs in the first coordination shell of the amorphous alloy that are forbidden in the Ga$_{50}$Se$_{50}$ crystals.
△ Less
Submitted 29 April, 2003;
originally announced April 2003.
-
Raman Scattering, Thermal studies and Reverse Monte Carlo Simulations of an Amorphous Ge$_{30}$Se$_{70}$ Alloy Produced by Mechanical Alloying
Authors:
K. D. Machado,
J. C. de Lima,
C. E. M. Campos,
P. S. Pizani,
T. A. Grandi
Abstract:
The short and intermediate range order of an amorphous Ge$_{30}$Se$_{70}$ alloy produced by Mechanical Alloying were studied by Reverse Monte Carlo simulations of its x-ray total structure factor, Raman scattering and differential scanning calorimetry. The simulations were used to compute the $G^{\text{RMC}}_{\text{Ge-Ge}}(r)$, $G^{\text{RMC}}_{\text{Ge-Se}}(r)$ and…
▽ More
The short and intermediate range order of an amorphous Ge$_{30}$Se$_{70}$ alloy produced by Mechanical Alloying were studied by Reverse Monte Carlo simulations of its x-ray total structure factor, Raman scattering and differential scanning calorimetry. The simulations were used to compute the $G^{\text{RMC}}_{\text{Ge-Ge}}(r)$, $G^{\text{RMC}}_{\text{Ge-Se}}(r)$ and $G^{\text{RMC}}_{\text{Se-Se}}(r)$ partial distribution functions and the ${\cal S}^{\text{RMC}}_{\text{Ge-Ge}}(K)$, ${\cal S}^{\text{RMC}}_{\text{Ge-Se}}(K)$ and ${\cal S}^{\text{RMC}}_{\text{Se-Se}}(K)$ partial structure factors. We calculated the coordination numbers and interatomic distances for the first and second neighbors and the bond-angle distribution functions $Θ_{ijl}(\cosθ)$. The data obtained indicate that the structure of the alloy has important differences when compared to alloys prepared by other techniques. There are a high number of Se-Se pairs in the first shell, and some of the tetrahedral units formed seemed to be connected by Se-Se bridges.
△ Less
Submitted 15 July, 2003; v1 submitted 29 April, 2003;
originally announced April 2003.
-
Aging of a nanostructured Zn50Se50 alloy produced by mechanical alloying
Authors:
K. D. Machado,
J. C. de Lima,
T. A. Grandi,
C. E. M. de Campos,
A. A. M. Gasperini
Abstract:
The aging of a nanocrystalline equiatomic ZnSe alloy produced by mechanical alloying was investigated using X-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques. The measured XRD patterns showed that Se atoms located at interfacial component migrated with aging giving raise to a crystalline selenium (c-Se) phase. DSC spectra of heat-treated samples at temperatures above…
▽ More
The aging of a nanocrystalline equiatomic ZnSe alloy produced by mechanical alloying was investigated using X-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques. The measured XRD patterns showed that Se atoms located at interfacial component migrated with aging giving raise to a crystalline selenium (c-Se) phase. DSC spectra of heat-treated samples at temperatures above 221oC followed by quenching showed that the c-Se particles changed to the amorphous state. It was also observed that the as-milled and aged samples are highly hydrophilic. The lattice parameters and the average crystallite sizes were calculated as a function of time of aging and temperature of heat treatment.
△ Less
Submitted 1 April, 2003; v1 submitted 13 December, 2002;
originally announced December 2002.
-
Structural study of an amorphous NiZr2 alloy by anomalous wide angle X-ray scattering and Reverse Monte Carlo simulations
Authors:
J. C. de Lima,
K. D. Machado,
T. A. Grandi,
C. E. M. de Campos,
D. Raoux,
J. M. Tonnerre,
D. Udlon,
T. I. Morrison
Abstract:
The local atomic structure of an amorphous NiZr2 alloy was investigated using the anomalous wide-angle x-ray scattering (AWAXS), differential anomalous scattering (DAS) and reverse Monte Carlo (RMC) simulations techniques. The AWAXS measurements were performed at eight different incident photon energies, including some close to the Ni and Zr K edges. From the measurements eight total structure f…
▽ More
The local atomic structure of an amorphous NiZr2 alloy was investigated using the anomalous wide-angle x-ray scattering (AWAXS), differential anomalous scattering (DAS) and reverse Monte Carlo (RMC) simulations techniques. The AWAXS measurements were performed at eight different incident photon energies, including some close to the Ni and Zr K edges. From the measurements eight total structure factor S(K,E) were derived. Using the AWAXS data four differential structure factors DSFi(K,Em,En) were derived, two about the Ni and Zr edges. The partial structure factors SNi-Ni(K), SNi-Zr(K) and SZr-Zr(K) were estimated by using two different methods. First, the S(K,E) and DSFi(K,Em,En) factors were combined and used in a matrix inversion process. Second, three S(K,E) factors were used as input data in the RMC technique. The coordination numbers and interatomic distances for the first neighbors extracted from the partial structure factors obtained by these two methods show a good agreement. By using the three-dimensional structure derived from the RMC simulations, the bond-angle distributions were calculated and they suggest the presence of distorted triangular-faced polyhedral units in the amorphous NiZr2 structure. We have used the Warren chemical short-range order parameter to evaluate the chemical short-range order for the amorphous NiZr2 alloy and for the NiZr2 compound. The calculated values show that the chemical short-range order found in these two materials is similar to that found in a solid solution.
△ Less
Submitted 8 December, 2002;
originally announced December 2002.
-
A study of nanocrystalline cobalt prepared by ball milling
Authors:
J. C. de Lima,
V. H. F. dos Santos,
T. A. Grandi,
R. S. de Biasi
Abstract:
The hcp-fcc transformation induced in cobalt powder by ball milling at room temperature was studied using the excess Gibbs free energy for the metals, in nanometric form, to calculate the activation energy that the atoms need for the phase transformation to occur. The crystalline component of the nanocrystalline cobalt produced in our laboratory, via ball milling, was analized using the radial d…
▽ More
The hcp-fcc transformation induced in cobalt powder by ball milling at room temperature was studied using the excess Gibbs free energy for the metals, in nanometric form, to calculate the activation energy that the atoms need for the phase transformation to occur. The crystalline component of the nanocrystalline cobalt produced in our laboratory, via ball milling, was analized using the radial distribution function technique. The results suggest that the crystalline component has the same structure as the bulk, contradicting results already reported.
△ Less
Submitted 26 October, 2000;
originally announced October 2000.
