-
Weakly Flux-Tunable Superconducting Qubit
Authors:
José M. Chávez-Garcia,
Firat Solgun,
Jared B. Hertzberg,
Oblesh Jinka,
Markus Brink,
Baleegh Abdo
Abstract:
Flux-tunable qubits are a useful resource for superconducting quantum processors. They can be used to perform cPhase gates, facilitate fast reset protocols, avoid qubit-frequency collisions in large processors, and enable certain fast readout schemes. However, flux-tunable qubits suffer from a trade-off between their tunability range and sensitivity to flux noise. Optimizing this trade-off is part…
▽ More
Flux-tunable qubits are a useful resource for superconducting quantum processors. They can be used to perform cPhase gates, facilitate fast reset protocols, avoid qubit-frequency collisions in large processors, and enable certain fast readout schemes. However, flux-tunable qubits suffer from a trade-off between their tunability range and sensitivity to flux noise. Optimizing this trade-off is particularly important for enabling fast, high-fidelity, all-microwave cross-resonance gates in large, high-coherence processors. This is mainly because cross-resonance gates set stringent conditions on the frequency landscape of neighboring qubits, which are difficult to satisfy with non-tunable transmons due to their relatively large fabrication imprecision. To solve this problem, we realize a coherent, flux-tunable, transmon-like qubit, which exhibits a frequency tunability range as small as 43 MHz, and whose frequency, anharmonicity and tunability range are set by a few experimentally achievable design parameters. Such a weakly tunable qubit is useful for avoiding frequency collisions in a large lattice while limiting its susceptibility to flux noise.
△ Less
Submitted 8 March, 2022;
originally announced March 2022.
-
Effects of surface treatments on flux tunable transmon qubits
Authors:
M. Mergenthaler,
C. Müller,
M. Ganzhorn,
S. Paredes,
P. Müller,
G. Salis,
V. P. Adiga,
M. Brink,
M. Sandberg,
J. B. Hertzberg,
S. Filipp,
A. Fuhrer
Abstract:
One of the main limitations in state-of-the art solid-state quantum processors are qubit decoherence and relaxation due to noise in their local environment. For the field to advance towards full fault-tolerant quantum computing, a better understanding of the underlying microscopic noise sources is therefore needed. Adsorbates on surfaces, impurities at interfaces and material defects have been ide…
▽ More
One of the main limitations in state-of-the art solid-state quantum processors are qubit decoherence and relaxation due to noise in their local environment. For the field to advance towards full fault-tolerant quantum computing, a better understanding of the underlying microscopic noise sources is therefore needed. Adsorbates on surfaces, impurities at interfaces and material defects have been identified as sources of noise and dissipation in solid-state quantum devices. Here, we use an ultra-high vacuum package to study the impact of vacuum loading, UV-light exposure and ion irradiation treatments on coherence and slow parameter fluctuations of flux tunable superconducting transmon qubits. We analyse the effects of each of these surface treatments by comparing averages over many individual qubits and measurements before and after treatment. The treatments studied do not significantly impact the relaxation rate $Γ_1$ and the echo dephasing rate $Γ_2^\textrm{e}$, except for Ne ion bombardment which reduces $Γ_1$. In contrast, flux noise parameters are improved by removing magnetic adsorbates from the chip surfaces with UV-light and NH$_3$ treatments. Additionally, we demonstrate that SF$_6$ ion bombardment can be used to adjust qubit frequencies in-situ and post fabrication without affecting qubit coherence at the sweet spot.
△ Less
Submitted 14 March, 2021;
originally announced March 2021.
-
Laser-annealing Josephson junctions for yielding scaled-up superconducting quantum processors
Authors:
Jared B. Hertzberg,
Eric J. Zhang,
Sami Rosenblatt,
Easwar Magesan,
John A. Smolin,
Jeng-Bang Yau,
Vivekananda P. Adiga,
Martin Sandberg,
Markus Brink,
Jerry M. Chow,
Jason S. Orcutt
Abstract:
As superconducting quantum circuits scale to larger sizes, the problem of frequency crowding proves a formidable task. Here we present a solution for this problem in fixed-frequency qubit architectures. By systematically adjusting qubit frequencies post-fabrication, we show a nearly ten-fold improvement in the precision of setting qubit frequencies. To assess scalability, we identify the types of…
▽ More
As superconducting quantum circuits scale to larger sizes, the problem of frequency crowding proves a formidable task. Here we present a solution for this problem in fixed-frequency qubit architectures. By systematically adjusting qubit frequencies post-fabrication, we show a nearly ten-fold improvement in the precision of setting qubit frequencies. To assess scalability, we identify the types of 'frequency collisions' that will impair a transmon qubit and cross-resonance gate architecture. Using statistical modeling, we compute the probability of evading all such conditions, as a function of qubit frequency precision. We find that without post-fabrication tuning, the probability of finding a workable lattice quickly approaches 0. However with the demonstrated precisions it is possible to find collision-free lattices with favorable yield. These techniques and models are currently employed in available quantum systems and will be indispensable as systems continue to scale to larger sizes.
△ Less
Submitted 23 September, 2020; v1 submitted 1 September, 2020;
originally announced September 2020.
-
Suppression of Unwanted $ZZ$ Interactions in a Hybrid Two-Qubit System
Authors:
Jaseung Ku,
Xuexin Xu,
Markus Brink,
David C. McKay,
Jared B. Hertzberg,
Mohammad H. Ansari,
B. L. T. Plourde
Abstract:
Mitigating crosstalk errors, whether classical or quantum mechanical, is critically important for achieving high-fidelity entangling gates in multi-qubit circuits. For weakly anharmonic superconducting qubits, unwanted $ZZ$ interactions can be suppressed by combining qubits with opposite anharmonicity. We present experimental measurements and theoretical modeling of two-qubit gate error for gates…
▽ More
Mitigating crosstalk errors, whether classical or quantum mechanical, is critically important for achieving high-fidelity entangling gates in multi-qubit circuits. For weakly anharmonic superconducting qubits, unwanted $ZZ$ interactions can be suppressed by combining qubits with opposite anharmonicity. We present experimental measurements and theoretical modeling of two-qubit gate error for gates based on the cross resonance interaction between a capacitively shunted flux qubit and a transmon and demonstrate the elimination of the $ZZ$ interaction.
△ Less
Submitted 9 April, 2020; v1 submitted 5 March, 2020;
originally announced March 2020.
-
Topological and subsystem codes on low-degree graphs with flag qubits
Authors:
Christopher Chamberland,
Guanyu Zhu,
Theodore J. Yoder,
Jared B. Hertzberg,
Andrew W. Cross
Abstract:
In this work we introduce two code families, which we call the heavy hexagon code and heavy square code. Both code families are implemented by assigning physical data and ancilla qubits to both vertices and edges of low degree graphs. Such a layout is particularly suitable for superconducting qubit architectures to minimize frequency collisions and crosstalk. In some cases, frequency collisions ca…
▽ More
In this work we introduce two code families, which we call the heavy hexagon code and heavy square code. Both code families are implemented by assigning physical data and ancilla qubits to both vertices and edges of low degree graphs. Such a layout is particularly suitable for superconducting qubit architectures to minimize frequency collisions and crosstalk. In some cases, frequency collisions can be reduced by several orders of magnitude. The heavy hexagon code is a hybrid surface/Bacon-Shor code mapped onto a (heavy) hexagonal lattice whereas the heavy square code is the surface code mapped onto a (heavy) square lattice. In both cases, the lattice includes all the ancilla qubits required for fault-tolerant error-correction. Naively, the limited qubit connectivity might be thought to limit the error-correcting capability of the code to less than its full distance. Therefore, essential to our construction is the use of flag qubits. We modify minimum weight perfect matching decoding to efficiently and scalably incorporate information from measurements of the flag qubits and correct up to the full code distance while respecting the limited connectivity. Simulations show that high threshold values for both codes can be obtained using our decoding protocol. Further, our decoding scheme can be adapted to other topological code families.
△ Less
Submitted 24 December, 2019; v1 submitted 22 July, 2019;
originally announced July 2019.
-
Tunable Superconducting Qubits with Flux-Independent Coherence
Authors:
M. D. Hutchings,
Jared B. Hertzberg,
Yebin Liu,
Nicholas T. Bronn,
George A. Keefe,
Jerry M. Chow,
B. L. T. Plourde
Abstract:
We have studied the impact of low-frequency magnetic flux noise upon superconducting transmon qubits with various levels of tunability. We find that qubits with weaker tunability exhibit dephasing that is less sensitive to flux noise. This insight was used to fabricate qubits where dephasing due to flux noise was suppressed below other dephasing sources, leading to flux-independent dephasing times…
▽ More
We have studied the impact of low-frequency magnetic flux noise upon superconducting transmon qubits with various levels of tunability. We find that qubits with weaker tunability exhibit dephasing that is less sensitive to flux noise. This insight was used to fabricate qubits where dephasing due to flux noise was suppressed below other dephasing sources, leading to flux-independent dephasing times T2* ~ 15 us over a tunable range of ~340 MHz. Such tunable qubits have the potential to create high-fidelity, fault-tolerant qubit gates and fundamentally improve scalability for a quantum processor.
△ Less
Submitted 21 February, 2017; v1 submitted 7 February, 2017;
originally announced February 2017.
-
Design and operation of a microfabricated phonon spectrometer utilizing superconducting tunnel junctions as phonon transducers
Authors:
Obafemi O. Otelaja,
Jared B. Hertzberg,
Mahmut Aksit,
Richard D. Robinson
Abstract:
In order to fully understand nanoscale heat transport it is necessary to spectrally characterize phonon transmission in nanostructures. Towards this goal we have developed a microfabricated phonon spectrometer. We utilize microfabricated superconducting tunnel junction-based (STJ) phonon transducers for the emission and detection of tunable, non-thermal, and spectrally resolved acoustic phonons, w…
▽ More
In order to fully understand nanoscale heat transport it is necessary to spectrally characterize phonon transmission in nanostructures. Towards this goal we have developed a microfabricated phonon spectrometer. We utilize microfabricated superconducting tunnel junction-based (STJ) phonon transducers for the emission and detection of tunable, non-thermal, and spectrally resolved acoustic phonons, with frequencies ranging from ~100 to ~870 GHz, in silicon microstructures. We show that phonon spectroscopy with STJs offers a spectral resolution of ~15-20 GHz, which is ~20 times better than thermal conductance measurements, for probing nanoscale phonon transport. The STJs are Al-AlxOy-Al tunnel junctions and phonon emission and detection occurs via quasiparticle excitation and decay transitions that occur in the superconducting films. We elaborate on the design geometry and constraints of the spectrometer, the fabrication techniques, and the low-noise instrumentation that are essential for successful application of this technique for nanoscale phonon studies. We discuss the spectral distribution of phonons emitted by an STJ emitter and the efficiency of their detection by an STJ detector. We demonstrate that the phonons propagate ballistically through a silicon microstructure, and that submicron spatial resolution is realizable in a design such as ours. Spectrally resolved measurements of phonon transport in nanoscale structures and nanomaterials will further the engineering and exploitation of phonons, and thus have important ramifications for nanoscale thermal transport as well as the burgeoning field of nanophononics.
△ Less
Submitted 25 March, 2013;
originally announced March 2013.
-
Back-action Evading Measurements of Nanomechanical Motion
Authors:
J. B. Hertzberg,
T. Rocheleau,
T. Ndukum,
M. Savva,
A. A. Clerk,
K. C. Schwab
Abstract:
When performing continuous measurements of position with sensitivity approaching quantum mechanical limits, one must confront the fundamental effects of detector back-action. Back-action forces are responsible for the ultimate limit on continuous position detection, can also be harnessed to cool the observed structure, and are expected to generate quantum entanglement. Back-action can also be ev…
▽ More
When performing continuous measurements of position with sensitivity approaching quantum mechanical limits, one must confront the fundamental effects of detector back-action. Back-action forces are responsible for the ultimate limit on continuous position detection, can also be harnessed to cool the observed structure, and are expected to generate quantum entanglement. Back-action can also be evaded, allowing measurements with sensitivities that exceed the standard quantum limit, and potentially allowing for the generation of quantum squeezed states. We realize a device based on the parametric coupling between an ultra-low dissipation nanomechanical resonator and a microwave resonator. Here we demonstrate back-action evading (BAE) detection of a single quadrature of motion with sensitivity 4 times the quantum zero-point motion, back-action cooling of the mechanical resonator to n = 12 quanta, and a parametric mechanical pre-amplification effect which is harnessed to achieve position resolution a factor 1.3 times quantum zero-point motion.
△ Less
Submitted 4 June, 2009;
originally announced June 2009.
-
Demonstration of an ultracold micro-optomechanical oscillator in a cryogenic cavity
Authors:
Simon Groeblacher,
Jared B. Hertzberg,
Michael R. Vanner,
Garrett D. Cole,
Sylvain Gigan,
K. C. Schwab,
Markus Aspelmeyer
Abstract:
Preparing and manipulating quantum states of mechanical resonators is a highly interdisciplinary undertaking that now receives enormous interest for its far-reaching potential in fundamental and applied science. Up to now, only nanoscale mechanical devices achieved operation close to the quantum regime. We report a new micro-optomechanical resonator that is laser cooled to a level of 30 thermal qu…
▽ More
Preparing and manipulating quantum states of mechanical resonators is a highly interdisciplinary undertaking that now receives enormous interest for its far-reaching potential in fundamental and applied science. Up to now, only nanoscale mechanical devices achieved operation close to the quantum regime. We report a new micro-optomechanical resonator that is laser cooled to a level of 30 thermal quanta. This is equivalent to the best nanomechanical devices, however, with a mass more than four orders of magnitude larger (43 ng versus 1 pg) and at more than two orders of magnitude higher environment temperature (5 K versus 30 mK). Despite the large laser-added cooling factor of 4,000 and the cryogenic environment, our cooling performance is not limited by residual absorption effects. These results pave the way for the preparation of 100-um scale objects in the quantum regime. Possible applications range from quantum-limited optomechanical sensing devices to macroscopic tests of quantum physics.
△ Less
Submitted 21 October, 2013; v1 submitted 13 January, 2009;
originally announced January 2009.
-
Self-cooling of a micro-mirror by radiation pressure
Authors:
S. Gigan,
H. R. Boehm,
M. Paternostro,
F. Blaser,
G. Langer,
J. B. Hertzberg,
K. Schwab,
D. Baeuerle,
M. Aspelmeyer,
A. Zeilinger
Abstract:
We demonstrate passive feedback cooling of a mechanical resonator based on radiation pressure forces and assisted by photothermal forces in a high-finesse optical cavity. The resonator is a free-standing high-reflectance micro-mirror (of mass m=400ng and mechanical quality factor Q=10^4) that is used as back-mirror in a detuned Fabry-Perot cavity of optical finesse F=500. We observe an increased…
▽ More
We demonstrate passive feedback cooling of a mechanical resonator based on radiation pressure forces and assisted by photothermal forces in a high-finesse optical cavity. The resonator is a free-standing high-reflectance micro-mirror (of mass m=400ng and mechanical quality factor Q=10^4) that is used as back-mirror in a detuned Fabry-Perot cavity of optical finesse F=500. We observe an increased damping in the dynamics of the mechanical oscillator by a factor of 30 and a corresponding cooling of the oscillator modes below 10 K starting from room temperature. This effect is an important ingredient for recently proposed schemes to prepare quantum entanglement of macroscopic mechanical oscillators.
△ Less
Submitted 8 November, 2006; v1 submitted 11 July, 2006;
originally announced July 2006.
