Showing 1–10 of 10 results for author: Hodes, G

Experimental Evidence for Defect Tolerance in Pb-Halide Perovskites

Authors: Naga Prathibha Jasti, Igal Levine, Yishay Feldman, Gary Hodes, Sigalit Aharon, David Cahen

Abstract: The term defect tolerance (DT) is used often to rationalize the exceptional optoelectronic properties of Halide Perovskites (HaPs) and their devices. Even though DT lacked direct experimental evidence, it became a "fact" in the field. DT in semiconductors implies that structural defects do not translate to electrical and optical effects (e.g., due to charge trapping), associated with such defects.… ▽ More The term defect tolerance (DT) is used often to rationalize the exceptional optoelectronic properties of Halide Perovskites (HaPs) and their devices. Even though DT lacked direct experimental evidence, it became a "fact" in the field. DT in semiconductors implies that structural defects do not translate to electrical and optical effects (e.g., due to charge trapping), associated with such defects. We present the first direct experimental evidence for DT in Pb-HaPs by comparing the structural quality of 2-dimensional (2D), 2D-3D, and 3D Pb-iodide HaP crystals with their optoelectronic characteristics using high-sensitivity methods. Importantly, we get information from the materials' bulk, because we sample at least a few hundred nanometers, up to several micrometers, from the sample's surface, which allows for assessing intrinsic bulk (and not only surface-) properties of HaPs. The results point to DT in 3D, 2D-3D, and 2D Pb-HaPs. Overall, our data provide an experimental basis to rationalize DT in Pb-HaPs. These experiments and findings can guide the search for, and design of other materials with DT. △ Less

Submitted 22 February, 2024; v1 submitted 25 May, 2023; originally announced May 2023.

The pursuit of stability in halide perovskites: the monovalent cation and the key for surface and bulk self-repair

Authors: D R Ceratti, A V Cohen, R Tenne, Y Rakita, L Snarski, L Cremonesi, I Goldian, I Kaplan-Ashiri, T Bendikov, V Kalchenko, M Elbaum, M A C Potenza, L Kronik, G Hodes, D Cahen

Abstract: We find significant differences between degradation and healing at the surface or in the bulk for each of the different APbBr3 single crystals (A=CH3NH3+, methylammonium (MA); HC(NH2)2+, formamidinium (FA); and cesium, Cs+). Using 1- and 2-photon microscopy and photobleaching we conclude that kinetics dominate the surface, and thermodynamics the bulk stability. Fluorescence-lifetime imaging micros… ▽ More We find significant differences between degradation and healing at the surface or in the bulk for each of the different APbBr3 single crystals (A=CH3NH3+, methylammonium (MA); HC(NH2)2+, formamidinium (FA); and cesium, Cs+). Using 1- and 2-photon microscopy and photobleaching we conclude that kinetics dominate the surface, and thermodynamics the bulk stability. Fluorescence-lifetime imaging microscopy, as well as results from several other methods, relate the (damaged) state of the halide perovskite (HaP) after photobleaching to its modified optical and electronic properties. The A cation type strongly influences both the kinetics and the thermodynamics of recovery and degradation: FA heals best the bulk material with faster self-healing; Cs+ protects the surface best, being the least volatile of the A cations and possibly through O-passivation; MA passivates defects via methylamine from photo-dissociation, which binds to Pb2+. DFT simulations not only provide insight into the latter conclusion, but also show the importance and stability of the Br3- defect. These results rationalize the use of mixed A-cation materials for optimizing both solar cell stability and overall performance of HaP-based devices, and provide a basis for designing new HaP variants. △ Less

Submitted 30 September, 2020; originally announced September 2020.

Type and Degree of Covalence: Empirical Derivation and Implications

Authors: Yevgeny Rakita, Thomas Kirchartz, Gary Hodes, David Cahen

Abstract: The way atoms attach to each other defines the function(s), e.g., mechanical, optical, electronic, of a given material. The nature of the chemical bond is, therefore, one of the most fundamental issues in materials. Both ionic interactions, i.e., resulting from electrical charges associated with the atoms, and covalent ones, i.e., the sharing of electrons between nuclei of different atoms, are usu… ▽ More The way atoms attach to each other defines the function(s), e.g., mechanical, optical, electronic, of a given material. The nature of the chemical bond is, therefore, one of the most fundamental issues in materials. Both ionic interactions, i.e., resulting from electrical charges associated with the atoms, and covalent ones, i.e., the sharing of electrons between nuclei of different atoms, are usually viewed as forces that attract between atoms to form a rigid structure. Although less common for solid materials, it was shown theoretically to be possible for covalent interactions at the chemically-active electronic shell (or valence-band maximum) of semiconductors to reverse their more common nature and become repulsive, i.e., act against bonding. Some semiconductors with such predicted anti-bonding valence-band maximum levels (such as halide perovskites) show experimentally some amazing (opto-) electronic properties. Predictions that anti-bonding character can allow tolerance for existing defects, at least in part, can explain the superior properties of such semiconductors. Although there are known experimental ways to estimate the degree of the covalent nature (e.g., electronegativity), this was not possible hitherto for the type, i.e., distinguishing whether a material exhibits bonding or anti-bonding covalent interactions. We have developed a simple way to reveal the complete nature (both type and degree) of chemical bonds, using experimental data. After confirming our development with classical models and theoretical predictions, with a set of ~40 different functional semi-conductors, we show how knowledge of the complete nature of covalent bonding is of critical importance for fundamental properties of semiconductors. △ Less

Submitted 8 July, 2019; originally announced July 2019.

Comments: 25 Pages, 8 figures, ESI follows the main text. References are at the end of the ESI

Between Structure and Performance in Halide Perovskites for Photovoltaic Applications: the Role of Defects

Authors: Yevgeny Rakita, David Cahen, Gary Hodes

Abstract: My study is about Halide Perovskites (HaPs) and focuses the fundamental structural, chemical and dielectric properties of HaPs in reference to their PV-related properties. * I present my main research model: HaP single-crystals - their growth and characterization; * I start by exploring the bond nature of HaPs using Nanoindentation and Solid-State NMR techniques. * I explore the 'deformation… ▽ More My study is about Halide Perovskites (HaPs) and focuses the fundamental structural, chemical and dielectric properties of HaPs in reference to their PV-related properties. * I present my main research model: HaP single-crystals - their growth and characterization; * I start by exploring the bond nature of HaPs using Nanoindentation and Solid-State NMR techniques. * I explore the 'deformation potential' of the structure and show that its low and positive value in HaPs strongly suggests a pronounced 'defect tolerance'. * I explore the scattering mechanism of charges in the soft and highly polarizable system such as HaPs, and show that its low mobility (relative to other heteropolar systems) is fundamental and cannot be improved. I also show that a positive 'deformation potential' (so the valence band is 'anti-bonding', where a system should promote 'defect-tolerance') is something that is common to other highly polarizable systems, such as AgX, and Pb-chalcogenides. * I explore the chemistry of the system and show that HaPs can easily break to constituents, but also easily be made by the same constituents, suggesting a low activation energy for annealing process to take care even at RT. This RT annealing can promote 'self-healing' at ~second to ~minute time-scale, which we clearly observe. We find 'entropic-stabilization' to be very important in 'self-healing' processes of that kind. * I explore the importance of symmetry breaking in the HaP structure, which can induce a polar - and thus Ferroelectric - structure. We conclude that Ferroelectricity is not a fundamental property of HaPs, since it doesn't exist in MAPbBr3, but only in MAPbI3 - as proven unambiguously - and what is present in MAPbI3 is in doubt important for photovoltaics, when using them at RT or above. Due to compression, if you find a low-quality figure you want- please email me. △ Less

Submitted 28 September, 2018; originally announced September 2018.

Comments: PhD thesis

Tetragonal CH3NH3PbI3 Is Ferroelectric

Authors: Yevgeny Rakita, Omri Bar-Elli, Elena Meirzadeh, Hadar Kaslasi, Yagel Peleg, Gary Hodes, Igor Lubo-mirsky, Dan Oron, David Ehre, David Cahen

Abstract: Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with esp. tetragonal methylammonium lead tri-iodide (MAPbI3). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to spatia… ▽ More Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with esp. tetragonal methylammonium lead tri-iodide (MAPbI3). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to spatial separation of electrons and holes, a possibility if MAPbI3 is a semiconducting ferroelectric, which, however, requires clear experimental evidence. As a first step we show that, in operando, MAPbI3 (unlike MAPbBr3) is pyroelectric, which implies it can be ferroelectric. The next step, proving it is (not) ferroelectric, is challenging, because of the material s relatively high electrical conductance (a consequence of an optical band gap suitable for PV conversion!) and low stability under high applied bias voltage. This excludes normal measurements of a ferroelectric hysteresis loop to prove ferroelctricity s hallmark for switchable polarization. By adopting an approach suitable for electrically leaky materials as MAPbI3, we show here ferroelectric hysteresis from well-characterized single crystals at low temperature (still within the tetragonal phase, which is the room temperature stable phase). Using chemical etching, we also image polar domains, the structural fingerprint for ferroelectricity, periodically stacked along the polar axis of the crystal, which, as predicted by theory, scale with the overall crystal size. We also succeeded in detecting clear second-harmonic generation, direct evidence for the material s non-centrosymmetry. We note that the material s ferroelectric nature, can, but not obviously need to be important in a PV cell, operating around room temperature. △ Less

Submitted 17 February, 2017; originally announced February 2017.

Comments: Abstract (p:1), Main text [Includes 7 figures] (P:2-13), References (p:14-17), Supporting information (p:18-36)

Temperature-dependent Hysteresis in MAPbI3 Solar Cells

Authors: Igal Levine, Pabitra K. Nayak, Jacob Tse-Wei Wang, Nobuya Sakai, Stephan Van Reenen, Thomas M. Brenner, Sabyasachi Mukhopadhyay, Henry J. Snaith, Gary Hodes, David Cahen

Abstract: Hysteresis in the current-voltage characteristics of hybrid organic-inorganic perovskite-based solar cells is one of the fundamental aspects of these cells that we do not understand well. One possible cause, suggested for the hysteresis, is polarization of the perovskite layer under applied voltage and illumination bias, due to ion migration within the perovskite. To study this problem systemicall… ▽ More Hysteresis in the current-voltage characteristics of hybrid organic-inorganic perovskite-based solar cells is one of the fundamental aspects of these cells that we do not understand well. One possible cause, suggested for the hysteresis, is polarization of the perovskite layer under applied voltage and illumination bias, due to ion migration within the perovskite. To study this problem systemically current-voltage characteristics of both regular (light incident through the electron conducting contact) and so-called inverted (light incident through the hole conducting contact) perovskite cells were studied at different temperatures and scan rates. We explain our results by assuming that the effects of scan rate and temperature on hysteresis are strongly correlated to ion migration within the device, with the rate-determining step being ion migration at/across the interfaces of the perovskite layer with the contact materials. By correlating between the scan rate with the measurement temperature we show that the inverted and regular cells operate in different hysteresis regimes, with different activation energies of 0.28+-0.04 eV and 0.59+-0.09 eV, respectively. We suggest that the differences, observed between the two architectures are due to different rates of ion migration close to the interfaces, and conclude that the diffusion coefficient of migrating ions in the inverted cells is 3 orders of magnitude higher than in the regular cells, leading to different accumulation rates of ions near the interfaces. Analysis of VOC as a function of temperature shows that the main recombination mechanism is trap-assisted (Shockley-Read Hall, SRH) in the space charge region, similar to what is the case for other thin film inorganic solar cells. △ Less

Submitted 13 April, 2016; originally announced April 2016.

Comments: 47 pages including supplementary information

Journal ref: JPCL C 120.30 , 2016, 16399-16411

Cesium Enhances Long-Term Stability of Lead Bromide Perovskite-Based Solar Cells

Authors: Michael Kulbak, Satyajit Gupta, Nir Kedem, Igal Levine, Tatyana Bendikov, Gary Hodes, David Cahen

Abstract: Direct comparison between perovskite-structured hybrid organic-inorganic - methyl ammonium lead bromide (MAPbBr3) and all-inorganic cesium lead bromide (CsPbBr3), allows identifying possible fundamental differences in their structural, thermal and electronic characteristics. Both materials possess a similar direct optical band-gap, but CsPbBr3 demonstrates a higher thermal stability than MAPbBr3.… ▽ More Direct comparison between perovskite-structured hybrid organic-inorganic - methyl ammonium lead bromide (MAPbBr3) and all-inorganic cesium lead bromide (CsPbBr3), allows identifying possible fundamental differences in their structural, thermal and electronic characteristics. Both materials possess a similar direct optical band-gap, but CsPbBr3 demonstrates a higher thermal stability than MAPbBr3. In order to compare device properties we fabricated solar cells, with similarly synthesized MAPbBr3 or CsPbBr3, over mesoporous titania scaffolds. Both cell types demonstrated comparable photovoltaic performances under AM1.5 illumination, reaching power conversion efficiencies of ~6 % with a poly-aryl amine-based derivative as hole transport material. Further analysis shows that Cs-based devices are as efficient as, and more stable than methyl ammonium-based ones, after aging (storing the cells for 2 weeks in a dry (relative humidity 15-20%) air atmosphere in the dark) for 2 weeks, under constant illumination (at maximum power), and under electron beam irradiation. △ Less

Submitted 24 November, 2015; originally announced November 2015.

Are Mobilities in Hybrid Organic-Inorganic Halide Perovskites Actually 'High'?

Authors: Thomas M. Brenner, David A. Egger, Andrew M. Rappe, Leeor Kronik, Gary Hodes, David Cahen

Abstract: We present an experimental and theoretical viewpoint on the electronic carrier mobilities of typical hybrid organic-inorganic perovskites (HOIPs). While these mobilities are often quoted as high, a review of them shows that although otherwise the semiconducting properties of HOIPs are impressively good, mobilities of HOIPs used in most solar cells are actually not that high. This is especially app… ▽ More We present an experimental and theoretical viewpoint on the electronic carrier mobilities of typical hybrid organic-inorganic perovskites (HOIPs). While these mobilities are often quoted as high, a review of them shows that although otherwise the semiconducting properties of HOIPs are impressively good, mobilities of HOIPs used in most solar cells are actually not that high. This is especially apparent if they are compared to those of inorganic semiconductors used in other high efficiency solar cells. We critically examine possible causes and focus on electron-lattice coupling mechanisms that are active at room temperature, and can lead to carrier scattering. From this, we propose scattering due to acoustic phonons or polarons as possible causes, but also point out the difficulties with each of these in view of additional experimental and theoretical findings in the literature. Further research in this direction will contribute to making HOIP solar cells even more efficient than they already are. △ Less

Submitted 29 October, 2015; originally announced October 2015.

Mechanical Properties of APbX3 (A=Cs or CH3NH3; X=I or Br) Perovskite Single Crystals

Authors: Yevgeny Rakita, Sidney R. Cohen, Nir Klein Kedem, Gary Hodes, David Cahen

Abstract: The remarkable optoelectronic, and especially photovoltaic performance of hybrid-organic-inorganic perovskite (HOIP) materials drives efforts to connect materials properties to this performance. From nano-indentation experiments on solution-grown single crystals we obtain elastic modulus and nano-hardness values of APbX3 (A = Cs, CH3NH3 and X = I, Br). The Youngs moduli are about 14, 19.5 and 16 G… ▽ More The remarkable optoelectronic, and especially photovoltaic performance of hybrid-organic-inorganic perovskite (HOIP) materials drives efforts to connect materials properties to this performance. From nano-indentation experiments on solution-grown single crystals we obtain elastic modulus and nano-hardness values of APbX3 (A = Cs, CH3NH3 and X = I, Br). The Youngs moduli are about 14, 19.5 and 16 GPa, for CH3NH3PbI3, CH3NH3PbBr3 and CsPbBr3, respectively, lending credence to theoretically calculated values. We discuss possible relevance of our results to suggested self-healing, ion diffusion and ease of manufacturing. Using our results, together with literature data on elastic moduli, we classified HOIPs amongst relevant materials groups, based on their elasto-mechanical properties. △ Less

Submitted 17 August, 2015; originally announced August 2015.

Comments: 20 pages (including 4 pages of Supporting Information after the references), 3 figures (+3 in the Supporting Information), 2 tables (+1 in the Supporting Information)

Journal ref: MRS Communications, 5, 623-629 (2015)

Why Lead Methylammonium tri-IODIDE perovskite-based solar cells requires a mesoporous electron transporting scaffold (but not necessarily a hole conductor)

Authors: Eran Edri, Saar Kirmayer, Alex Henning, Sabyasachi Mukhopadhyay, Konstantin Gartsman, Yossi Rosenwaks, Gary Hodes, David Cahen

Abstract: CH3NH3PbI3-based solar cells were characterized with electron beam-induced current (EBIC), and compared to CH3NH3PbI3-xClx ones. A spatial map of charge separation efficiency in working cells shows p-i-n structures for both thin film cells. Effective diffusion lengths, LD, (from EBIC profile) show that holes are extracted significantly more efficiently than electrons in CH3NH3PbI3, explaining why… ▽ More CH3NH3PbI3-based solar cells were characterized with electron beam-induced current (EBIC), and compared to CH3NH3PbI3-xClx ones. A spatial map of charge separation efficiency in working cells shows p-i-n structures for both thin film cells. Effective diffusion lengths, LD, (from EBIC profile) show that holes are extracted significantly more efficiently than electrons in CH3NH3PbI3, explaining why CH3NH3PbI3-based cells require mesoporous electron conductors, while CH3NH3PbI3-xClx ones, where LD values are comparable for both charge types, do not. △ Less

Submitted 12 January, 2014; originally announced January 2014.

Comments: 18 pages, 6 figured, submitted to Nano Letters on December 2nd, 2013