-
Degradation Kinetics of Inverted Perovskite Solar Cells
Authors:
Mejd Alsari,
Andrew J. Pearson,
Jacob Tse-Wei Wang,
Zhiping Wang,
Augusto Montisci,
Neil C. Greenham,
Henry J. Snaith,
Samuele Lilliu,
Richard H. Friend
Abstract:
We explore the degradation behaviour under continuous illumination and direct oxygen exposure of inverted unencapsulated formamidinium(FA)0.83Cs0.17Pb(I0.8Br0.2)3, CH3NH3PbI3, and CH3NH3PbI3-xClx perovskite solar cells. We continuously test the devices in-situ and in-operando with current-voltage sweeps, transient photocurrent, and transient photovoltage measurements, and find that degradation in…
▽ More
We explore the degradation behaviour under continuous illumination and direct oxygen exposure of inverted unencapsulated formamidinium(FA)0.83Cs0.17Pb(I0.8Br0.2)3, CH3NH3PbI3, and CH3NH3PbI3-xClx perovskite solar cells. We continuously test the devices in-situ and in-operando with current-voltage sweeps, transient photocurrent, and transient photovoltage measurements, and find that degradation in the CH3NH3PbI3-xClx solar cells due to oxygen exposure occurs over shorter timescales than FA0.83Cs0.17Pb(I0.8Br0.2)3 mixed-cation devices. We attribute these oxygen-induced losses in the power conversion efficiencies to the formation of electron traps within the perovskite photoactive layer. Our results highlight that the formamidinium-caesium mixed-cation perovskites are much less sensitive to oxygen-induced degradation than the methylammonium-based perovskite cells, and that further improvements in perovskite solar cell stability should focus on the mitigation of trap generation during ageing.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
-
Perovskite-perovskite tandem photovoltaics with optimized bandgaps
Authors:
Giles E. Eperon,
Tomas Leijtens,
Kevin A. Bush,
Rohit Prasanna,
Thomas Green,
Jacob Tse-Wei Wang,
David P. McMeekin,
George Volonakis,
Rebecca L. Milot,
Richard May,
Axel Palmstrom,
Daniel J. Slotcavage,
Rebecca A. Belisle,
Jay B. Patel,
Elizabeth S. Parrott,
Rebecca J. Sutton,
Wen Ma,
Farhad Moghadam,
Bert Conings,
Aslihan Babayigit,
Hans-Gerd Boyen,
Stacey Bent,
Feliciano Giustino,
Laura M. Herz,
Michael B. Johnston
, et al. (2 additional authors not shown)
Abstract:
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of…
▽ More
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of 17.0 % with over 1.65 volts open-circuit voltage. We also make mechanically stacked four terminal tandem cells and obtain 20.3 % efficiency. Crucially, we find that our infrared absorbing perovskite cells exhibit excellent thermal and atmospheric stability, unprecedented for Sn based perovskites. This device architecture and materials set will enable 'all perovskite' thin film solar cells to reach the highest efficiencies in the long term at the lowest costs.
△ Less
Submitted 20 January, 2017; v1 submitted 12 August, 2016;
originally announced August 2016.
-
Spatially resolved studies of the phases and morphology of methylammonium and formamidinium lead tri-halide perovskites
Authors:
K. Galkowski,
A. Mitioglu,
A. Surrente,
Z. Yang,
D. K. Maude,
P. Kossacki,
G. E. Eperon,
J. T-W. Wang,
H. J. Snaith,
P. Plochocka,
R. J. Nicholas
Abstract:
The family of organic-inorganic tri-halide perovskites including MA (MethylAmmonium)PbI$_{3}$, MAPbI$_{3-x}$Cl$_{x}$, FA (FormAmidinium)PbI$_{3}$ and FAPbBr$_{3}$ are having a tremendous impact on the field of photovoltaic cells due to their ease of deposition and efficiencies, but device performance can be significanly affected by inhomogeneities. Here we report a study of temperature dependent m…
▽ More
The family of organic-inorganic tri-halide perovskites including MA (MethylAmmonium)PbI$_{3}$, MAPbI$_{3-x}$Cl$_{x}$, FA (FormAmidinium)PbI$_{3}$ and FAPbBr$_{3}$ are having a tremendous impact on the field of photovoltaic cells due to their ease of deposition and efficiencies, but device performance can be significanly affected by inhomogeneities. Here we report a study of temperature dependent micro-photoluminescence which shows a strong spatial inhomogeneity related to the presence of microcrystalline grains, which can be both light and dark. In all of the tri-iodide based materials there is evidence that the tetragonal to orthorhombic phase transition observed around 160K does not occur uniformly across the sample with domain formation related to the underlying microcrystallite grains, some of which remain in the high temperature, tetragonal, phase even at very low temperatures. At low temperature the tetragonal domains can be significantly influenced by local defects in the layers. In FAPbBr$_{3}$ a more macroscopic domain structure is observed with large numbers of grains forming phase correlated regions.
△ Less
Submitted 10 June, 2016;
originally announced June 2016.
-
Temperature-dependent Hysteresis in MAPbI3 Solar Cells
Authors:
Igal Levine,
Pabitra K. Nayak,
Jacob Tse-Wei Wang,
Nobuya Sakai,
Stephan Van Reenen,
Thomas M. Brenner,
Sabyasachi Mukhopadhyay,
Henry J. Snaith,
Gary Hodes,
David Cahen
Abstract:
Hysteresis in the current-voltage characteristics of hybrid organic-inorganic perovskite-based solar cells is one of the fundamental aspects of these cells that we do not understand well. One possible cause, suggested for the hysteresis, is polarization of the perovskite layer under applied voltage and illumination bias, due to ion migration within the perovskite. To study this problem systemicall…
▽ More
Hysteresis in the current-voltage characteristics of hybrid organic-inorganic perovskite-based solar cells is one of the fundamental aspects of these cells that we do not understand well. One possible cause, suggested for the hysteresis, is polarization of the perovskite layer under applied voltage and illumination bias, due to ion migration within the perovskite. To study this problem systemically current-voltage characteristics of both regular (light incident through the electron conducting contact) and so-called inverted (light incident through the hole conducting contact) perovskite cells were studied at different temperatures and scan rates. We explain our results by assuming that the effects of scan rate and temperature on hysteresis are strongly correlated to ion migration within the device, with the rate-determining step being ion migration at/across the interfaces of the perovskite layer with the contact materials. By correlating between the scan rate with the measurement temperature we show that the inverted and regular cells operate in different hysteresis regimes, with different activation energies of 0.28+-0.04 eV and 0.59+-0.09 eV, respectively. We suggest that the differences, observed between the two architectures are due to different rates of ion migration close to the interfaces, and conclude that the diffusion coefficient of migrating ions in the inverted cells is 3 orders of magnitude higher than in the regular cells, leading to different accumulation rates of ions near the interfaces. Analysis of VOC as a function of temperature shows that the main recombination mechanism is trap-assisted (Shockley-Read Hall, SRH) in the space charge region, similar to what is the case for other thin film inorganic solar cells.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
-
Determination of the exciton binding energy and effective masses for the methylammonium and formamidinium lead tri-halide perovskite family
Authors:
Krzysztof Galkowski,
Anatolie Mitioglu,
Atsuhiko Miyata,
Paulina Plochocka,
Oliver Portugall,
Giles E. Eperon,
Jacob Tse-Wei Wang,
Thomas Stergiopoulos,
Samuel D. Stranks,
Henry J. Snaith,
Robin J. Nicholas
Abstract:
The family of organic-inorganic halide perovskite materials has generated tremendous interest in the field of photovoltaics due to their high power conversion efficiencies. There has been intensive development of cells based on the archetypal methylammonium (MA)and recently introduced formamidinium (FA) materials, however, there is still considerable controversy over their fundamental electronic p…
▽ More
The family of organic-inorganic halide perovskite materials has generated tremendous interest in the field of photovoltaics due to their high power conversion efficiencies. There has been intensive development of cells based on the archetypal methylammonium (MA)and recently introduced formamidinium (FA) materials, however, there is still considerable controversy over their fundamental electronic properties. Two of the most important parameters are the binding energy of the exciton (R$^{*}$) and its reduced effective mass $μ$. Here we present extensive magneto optical studies of Cl assisted grown MAPbI$_{3}$ as well as MAPbBr$_{3}$ and the FA based materials FAPbI$_{3}$ and FAPbBr$_{3}$. We fit the excitonic states as a hydrogenic atom in magnetic field and the Landau levels for free carriers to give R$^{*}$ and $μ$. The values of the exciton binding energy are in the range 14 - 25 meV in the low temperature phase and fall considerably at higher temperatures for the tri-iodides, consistent with free carrier behaviour in all devices made from these materials. Both R$^{*}$ and $μ$ increase approximately proportionally to the band gap, and the mass values, 0.09-0.117 m$_{0}$, are consistent with a simple \textbf{k.p} perturbation approach to the band structure which can be generalized to predict values for the effective mass and binding energy for other members of this perovskite family of materials.
△ Less
Submitted 20 November, 2015;
originally announced November 2015.
-
Direct Measurement of the Exciton Binding Energy and Effective Masses for Charge carriers in an Organic-Inorganic Tri-halide Perovskite
Authors:
Atsuhiko Miyata,
Anatolie Mitioglu,
Paulina Plochocka,
Oliver Portugall,
Jacob Tse-Wei Wang,
Samuel D. Stranks,
Henry J. Snaith,
Robin J. Nicholas
Abstract:
Solar cells based on the organic-inorganic tri-halide perovskite family of materials have shown remarkable progress recently, offering the prospect of low-cost solar energy from devices that are very simple to process. Fundamental to understanding the operation of these devices is the exciton binding energy, which has proved both difficult to measure directly and controversial. We demonstrate that…
▽ More
Solar cells based on the organic-inorganic tri-halide perovskite family of materials have shown remarkable progress recently, offering the prospect of low-cost solar energy from devices that are very simple to process. Fundamental to understanding the operation of these devices is the exciton binding energy, which has proved both difficult to measure directly and controversial. We demonstrate that by using very high magnetic fields it is possible to make an accurate and direct spectroscopic measurement of the exciton binding energy, which we find to be only 16 meV at low temperatures, over three times smaller than has been previously assumed. In the room temperature phase we show that the binding energy falls to even smaller values of only a few millielectronvolts, which explains their excellent device performance due to spontaneous free carrier generation following light absorption. Additionally, we determine the excitonic reduced effective mass to be 0.104me (where me is the electron mass), significantly smaller than previously estimated experimentally but in good agreement with recent calculations. Our work provides crucial information about the photophysics of these materials, which will in turn allow improved optoelectronic device operation and better understanding of their electronic properties.
△ Less
Submitted 27 April, 2015;
originally announced April 2015.
-
Raman scattering investigation of the electron-phonon coupling in superconducting Nd(O,F)BiS$_2$
Authors:
S. F. Wu,
P. Richard,
X. B. Wang,
C. S. Lian,
S. M. Nie,
J. T. Wang,
N. L. Wang,
H. Ding
Abstract:
We have performed polarized Raman scattering measurements on the newly discovered superconductor Nd(O,F)BiS$_2$ ($T_c = 4$ K). We observe 2 Raman active modes, with frequencies in accordance with first-principles calculations. One A$_{1g}$ phonon mode at 112.4 cm$^{-1}$ exhibits a Fano line shape due to electron-phonon coupling. We find a resonance for this mode at 2.45 eV excitation energy. We es…
▽ More
We have performed polarized Raman scattering measurements on the newly discovered superconductor Nd(O,F)BiS$_2$ ($T_c = 4$ K). We observe 2 Raman active modes, with frequencies in accordance with first-principles calculations. One A$_{1g}$ phonon mode at 112.4 cm$^{-1}$ exhibits a Fano line shape due to electron-phonon coupling. We find a resonance for this mode at 2.45 eV excitation energy. We estimate a 0.68 contribution of this mode to the electron-phonon coupling constant $λ$. Our Raman results suggest that the BiS$_2$-based superconductors are possibly phonon-mediated BCS superconductors.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
Effect of Ni on Cu precipitation kinetics in α-Fe by AKMC study
Authors:
Yi Wang,
Huai Yu Hou,
Xiang Bing Liu,
Rong Shan Wang,
Jing Tao Wang
Abstract:
The kinetics of coherent Cu rich precipitation in Fe-Cu and Fe-Cu-Ni alloys during thermal ageing have been modeled by Atomic Kinetic Monte Carlo method (AKMC). The AKMC is parameterized by existing ab-inito data to treat vacancy mediated diffusion which is depend on local atomic environment. A nonlinear semi-empirical time adjusting method is proposed to rescaled the MC time. The combining AKMC a…
▽ More
The kinetics of coherent Cu rich precipitation in Fe-Cu and Fe-Cu-Ni alloys during thermal ageing have been modeled by Atomic Kinetic Monte Carlo method (AKMC). The AKMC is parameterized by existing ab-inito data to treat vacancy mediated diffusion which is depend on local atomic environment. A nonlinear semi-empirical time adjusting method is proposed to rescaled the MC time. The combining AKMC and time adjusting method give a good agreement with experiments and other simulations, including advancement factor and the Cu cluster mobility. Simulations of ternary alloys reveal Ni has a temporal delay effect on Cu precipitation. This effect is caused by the decreasing of diffusion coefficient of Cu clusters. And the reduction effect of diffusion coefficient weakens with larger Cu cluster size. The simulation results can be used to explain the experimental phenomenon that ternary Fe-Cu-Ni alloys have higher cluster number density than corresponding binary during coarsening stage, which is related to cluster mobility.
△ Less
Submitted 14 January, 2013; v1 submitted 31 December, 2012;
originally announced December 2012.
-
First Principle Local Density Approximation Description of the Electronic Properties of Ferroelectric Sodium Nitrite
Authors:
C. E. Ekuma,
M. Jarrell,
J. Moreno,
L. Franklin,
G. L. Zhao,
J. T. Wang,
D. Bagayoko
Abstract:
The electronic structure of the ferroelectric crystal, NaNO$_2$, is studied by means of first-principles, local density calculations. Our ab-initio, non-relativistic calculations employed a local density functional approximation (LDA) potential and the linear combination of atomic orbitals (LCAO). Following the Bagayoko, Zhao, Williams, method, as enhanced by Ekuma, and Franklin (BZW-EF), we solve…
▽ More
The electronic structure of the ferroelectric crystal, NaNO$_2$, is studied by means of first-principles, local density calculations. Our ab-initio, non-relativistic calculations employed a local density functional approximation (LDA) potential and the linear combination of atomic orbitals (LCAO). Following the Bagayoko, Zhao, Williams, method, as enhanced by Ekuma, and Franklin (BZW-EF), we solved self-consistently both the Kohn-Sham equation and the equation giving the ground state charge density in terms of the wave functions of the occupied states. We found an indirect band gap of 2.83 eV, from W to R. Our calculated direct gaps are 2.90, 2.98, 3.02, 3.22, and 3.51 eV at R, W, X, Γ, and T, respectively. The band structure and density of states show high localization, typical of a molecular solid. The partial density of states shows that the valence bands are formed only by complex anionic states. These results are in excellent agreement with experiment. So are the calculated densities of states. Our calculated electron effective masses of 1.18, 0.63, and 0.73 mo in the Γ-X, Γ-R, and Γ-W directions, respectively, show the highly anisotropic nature of this material.
△ Less
Submitted 12 October, 2012; v1 submitted 28 August, 2012;
originally announced August 2012.
-
Synthesis of Large-Area MoS2 Atomic Layers with Chemical Vapor Deposition
Authors:
Yi-Hsien Lee,
Xin-Quan Zhang,
Wenjing Zhang,
Mu-Tung Chang,
Cheng-Te Lin,
Kai-Di Chang,
Ya-Chu Yu,
Jacob Tse-Wei Wang,
Chia-Seng Chang,
Lain-Jong Li,
Tsung-Wu Lin
Abstract:
Large-area MoS2 atomic layers are synthesized on SiO2 substrates by chemical vapor deposition using MoO3 and S powders as the reactants. Optical, microscopic and electrical measurements suggest that the synthetic process leads to the growth of MoS2 monolayer. The TEM images verify that the synthesized MoS2 sheets are highly crystalline.
Large-area MoS2 atomic layers are synthesized on SiO2 substrates by chemical vapor deposition using MoO3 and S powders as the reactants. Optical, microscopic and electrical measurements suggest that the synthetic process leads to the growth of MoS2 monolayer. The TEM images verify that the synthesized MoS2 sheets are highly crystalline.
△ Less
Submitted 24 February, 2012;
originally announced February 2012.
-
Local Density Approximation Description of Electronic Properties of Wurtzite Cadmium Sulfide (w-CdS)
Authors:
E. C. Ekuma,
L. Franklin,
G. L. Zhao,
J. T. Wang,
D. Bagayoko
Abstract:
We present calculated, electronic and related properties of wurtzite cadmium sulfide (w-CdS). Our ab-initio, non-relativistic calculations employed a local density functional approximation (LDA) potential and the linear combination of atomic orbitals (LCAO). Following the Bagayoko, Zhao, and Williams (BZW) method, we solved self-consistently both the Kohn-Sham equation and the equation giving the…
▽ More
We present calculated, electronic and related properties of wurtzite cadmium sulfide (w-CdS). Our ab-initio, non-relativistic calculations employed a local density functional approximation (LDA) potential and the linear combination of atomic orbitals (LCAO). Following the Bagayoko, Zhao, and Williams (BZW) method, we solved self-consistently both the Kohn-Sham equation and the equation giving the ground state density in terms of the wave functions of the occupied states. Our calculated, direct band gap of 2.47 eV, at the point, is in excellent agreement with experiment. So are the calculated density of states and the electron effective mass. In particular, our results reproduce the peaks in the conduction band density of states, within the experimental uncertainties.
△ Less
Submitted 11 November, 2010;
originally announced November 2010.
-
Ab Initio Local Density Approximation Description of the Electronic Properties of Zinc Blende Cadmium Sulfide (zb-CdS)
Authors:
C. E. Ekuma,
L. Franklin,
G. L. Zhao,
J. T. Wang,
D. Bagayoko
Abstract:
Ab-initio, self-consistent electronic energy bands of zinc blende CdS are reported within the local density functional approximation (LDA). Our first principle, non-relativistic and ground state calculations employed a local density potential and the linear combination of atomic orbitals (LCAO). Within the framework of the Bagayoko, Zhao, and Williams (BZW) method, we solved self-consistently both…
▽ More
Ab-initio, self-consistent electronic energy bands of zinc blende CdS are reported within the local density functional approximation (LDA). Our first principle, non-relativistic and ground state calculations employed a local density potential and the linear combination of atomic orbitals (LCAO). Within the framework of the Bagayoko, Zhao, and Williams (BZW) method, we solved self-consistently both the Kohn-Sham equation and the equation giving the ground state density in terms of the wave functions of the occupied states. Our calculated, direct band gap of 2.39 eV, at the point, is in accord with experiment. Our calculation reproduced the peaks in the conduction and valence bands density of states, within experimental uncertainties. The calculated electron effective mass agrees with experimental findings.
△ Less
Submitted 16 November, 2010; v1 submitted 4 November, 2010;
originally announced November 2010.