The impact of the halide cage on the electronic properties of fully inorganic caesium lead halide perovskites
Authors:
Z. Yang,
A. Surrente,
K. Galkowski,
A. Miyata,
O. Portugall,
R. J. Sutton,
A. A. Haghighirad,
H. J. Snaith,
D. K. Maude,
P. Plochocka,
R. J. Nicholas
Abstract:
Perovskite solar cells with record power conversion efficiency are fabricated by alloying both hybrid and fully inorganic compounds. While the basic electronic properties of the hybrid perovskites are now well understood, key electronic parameters for solar cell performance, such as the exciton binding energy of fully inorganic perovskites, are still unknown. By performing magneto transmission mea…
▽ More
Perovskite solar cells with record power conversion efficiency are fabricated by alloying both hybrid and fully inorganic compounds. While the basic electronic properties of the hybrid perovskites are now well understood, key electronic parameters for solar cell performance, such as the exciton binding energy of fully inorganic perovskites, are still unknown. By performing magneto transmission measurements, we determine with high accuracy the exciton binding energy and reduced mass of fully inorganic CsPbX$_3$ perovskites (X=I, Br, and an alloy of these). The well behaved (continuous) evolution of the band gap with temperature in the range $4-270$\,K suggests that fully inorganic perovskites do not undergo structural phase transitions like their hybrid counterparts. The experimentally determined dielectric constants indicate that at low temperature, when the motion of the organic cation is frozen, the dielectric screening mechanism is essentially the same both for hybrid and inorganic perovskites, and is dominated by the relative motion of atoms within the lead-halide cage.
△ Less
Submitted 14 June, 2017;
originally announced June 2017.
Perovskite-perovskite tandem photovoltaics with optimized bandgaps
Authors:
Giles E. Eperon,
Tomas Leijtens,
Kevin A. Bush,
Rohit Prasanna,
Thomas Green,
Jacob Tse-Wei Wang,
David P. McMeekin,
George Volonakis,
Rebecca L. Milot,
Richard May,
Axel Palmstrom,
Daniel J. Slotcavage,
Rebecca A. Belisle,
Jay B. Patel,
Elizabeth S. Parrott,
Rebecca J. Sutton,
Wen Ma,
Farhad Moghadam,
Bert Conings,
Aslihan Babayigit,
Hans-Gerd Boyen,
Stacey Bent,
Feliciano Giustino,
Laura M. Herz,
Michael B. Johnston
, et al. (2 additional authors not shown)
Abstract:
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of…
▽ More
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of 17.0 % with over 1.65 volts open-circuit voltage. We also make mechanically stacked four terminal tandem cells and obtain 20.3 % efficiency. Crucially, we find that our infrared absorbing perovskite cells exhibit excellent thermal and atmospheric stability, unprecedented for Sn based perovskites. This device architecture and materials set will enable 'all perovskite' thin film solar cells to reach the highest efficiencies in the long term at the lowest costs.
△ Less
Submitted 20 January, 2017; v1 submitted 12 August, 2016;
originally announced August 2016.
