-
A swimming bacterium in a two-fluid model of a polymer solution
Authors:
Sabarish V. Narayanan,
Donald L. Koch,
Sarah Hormozi
Abstract:
We analyse the motion of a flagellated bacterium in a two-fluid medium using slender body theory. The two-fluid model is useful for describing a body moving through a complex fluid with a microstructure whose length scale is comparable to the characteristic scale of the body. This is true for bacterial motion in biological fluids (entangled polymer solutions), where the entanglement results in a p…
▽ More
We analyse the motion of a flagellated bacterium in a two-fluid medium using slender body theory. The two-fluid model is useful for describing a body moving through a complex fluid with a microstructure whose length scale is comparable to the characteristic scale of the body. This is true for bacterial motion in biological fluids (entangled polymer solutions), where the entanglement results in a porous microstructure with typical pore diameters comparable to or larger than the flagellar bundle diameter but smaller than the diameter of the bacterial head. Thus the polymer and solvent satisfy different boundary conditions on the flagellar bundle and move with different velocities close to it. This gives rise to a screening length $L_B$ within which the fluids exchange momentum and the relative velocity between the two fluids decays. In this work, both the solvent and polymer of the two-fluid medium are modeled as Newtonian fluids with different viscosities $μ_s$ and $μ_p$ (viscosity ratio $λ= μ_p/μ_s$), thereby capturing the effects solely introduced by the microstructure of the complex fluid. From our calculations, we observe an increased drag anisotropy for a rigid, slender flagellar bundle moving through this two-fluid medium, resulting in an enhanced swimming velocity of the organism. The results are sensitive to the interaction between the bundle and the polymer and we discuss two physical scenarios corresponding to two types of interaction. Our model provides an explanation for the experimentally observed enhancement of swimming velocity of bacteria in entangled polymer solutions and motivates further experimental investigations.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Finite difference method in prolate spheroidal coordinates for freely suspended spheroidal particles in linear flows of viscous and viscoelastic fluids
Authors:
Arjun Sharma,
Donald L. Koch
Abstract:
A finite difference scheme is used to develop a numerical method to solve the flow of an unbounded viscoelastic fluid with zero to moderate inertia around a prolate spheroidal particle. The equations are written in prolate spheroidal coordinates, and the shape of the particle is exactly resolved as one of the coordinate surfaces representing the inner boundary of the computational domain. As the p…
▽ More
A finite difference scheme is used to develop a numerical method to solve the flow of an unbounded viscoelastic fluid with zero to moderate inertia around a prolate spheroidal particle. The equations are written in prolate spheroidal coordinates, and the shape of the particle is exactly resolved as one of the coordinate surfaces representing the inner boundary of the computational domain. As the prolate spheroidal grid is naturally clustered near the particle surface, good resolution is obtained in the regions where the gradients of relevant flow variables are most significant. This coordinate system also allows large domain sizes with a reasonable number of mesh points to simulate unbounded fluid around a particle. Changing the aspect ratio of the inner computational boundary enables simulations of different particle shapes ranging from a sphere to a slender fiber. Numerical studies of the latter particle shape allow testing of slender body theories. The mass and momentum equations are solved with a Schur complement approach allowing us to solve the zero inertia case necessary to isolate the viscoelastic effects. The singularities associated with the coordinate system are overcome using L'Hopital's rule. A straightforward imposition of conditions representing a time-varying combination of linear flows on the outer boundary allows us to study various flows with the same computational domain geometry. {For the special but important case of zero fluid and particle inertia we obtain a novel formulation that satisfies the force- and torque-free constraint in an iteration-free manner.} The numerical method is demonstrated for various flows of Newtonian and viscoelastic fluids around spheres and spheroids (including those with large aspect ratio). Good agreement is demonstrated with existing theoretical and numerical results.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Rotation of a fiber in simple shear flow of a dilute polymer solution
Authors:
Arjun Sharma,
Donald L. Koch
Abstract:
The motion of a freely rotating prolate spheroid in a simple shear flow of a dilute polymeric solution is examined in the limit of large particle aspect ratio, $κ$. A regular perturbation expansion in the polymer concentration, $c$, a generalized reciprocal theorem, and slender body theory to represent the velocity field of a Newtonian fluid around the spheroid are used to obtain the…
▽ More
The motion of a freely rotating prolate spheroid in a simple shear flow of a dilute polymeric solution is examined in the limit of large particle aspect ratio, $κ$. A regular perturbation expansion in the polymer concentration, $c$, a generalized reciprocal theorem, and slender body theory to represent the velocity field of a Newtonian fluid around the spheroid are used to obtain the $\mathcal{O}(c)$ correction to the particle's orientational dynamics. The resulting dynamical system predicts a range of orientational behaviors qualitatively dependent upon $c\cdot De$ ($De$ is the imposed shear rate times the polymer relaxation time) and $κ$ and quantitatively on $c$. At a small but finite $c\cdot De$, the particle spirals towards a limit cycle near the vorticity axis for all initial conditions. Upon increasing $κ$, the limit cycle becomes smaller. Thus, ultimately the particle undergoes a periodic motion around and at a small angle from the vorticity axis. At moderate $c\cdot De$, a particle starting near the flow-gradient plane departs it monotonically instead of spirally, as this plane (a limit cycle at smaller $c\cdot De$) obtains a saddle and an unstable node. The former is close to the flow direction. Upon further increasing $c\cdot De$, the saddle-node changes to a stable node. Therefore, depending upon the initial condition, a particle may either approach a periodic orbit near the vorticity axis or obtain a stable orientation near the flow direction. Upon further increasing $c\cdot De$, the limit cycle near the vorticity axis vanishes, and the particle aligns with the flow direction for all starting orientations.
△ Less
Submitted 1 October, 2023;
originally announced October 2023.
-
Local polar order controls mechanical stress and triggers layer formation in developing Myxococcus xanthus colonies
Authors:
Endao Han,
Chenyi Fei,
Ricard Alert,
Katherine Copenhagen,
Matthias D. Koch,
Ned S. Wingreen,
Joshua W. Shaevitz
Abstract:
Colonies of the social bacterium Myxococcus xanthus go through a morphological transition from a thin colony of cells to three-dimensional droplet-like fruiting bodies as a strategy to survive starvation. The biological pathways that control the decision to form a fruiting body have been studied extensively. However, the mechanical events that trigger the creation of multiple cell layers and give…
▽ More
Colonies of the social bacterium Myxococcus xanthus go through a morphological transition from a thin colony of cells to three-dimensional droplet-like fruiting bodies as a strategy to survive starvation. The biological pathways that control the decision to form a fruiting body have been studied extensively. However, the mechanical events that trigger the creation of multiple cell layers and give rise to droplet formation remain poorly understood. By measuring cell orientation, velocity, polarity, and force with cell-scale resolution, we reveal a stochastic local polar order in addition to the more obvious nematic order. Average cell velocity and active force at topological defects agree with predictions from active nematic theory, but their fluctuations are anomalously large due to polar active forces generated by the self-propelled rod-shaped cells. We find that M. xanthus cells adjust their reversal frequency to tune the magnitude of this local polar order, which in turn controls the mechanical stresses and triggers layer formation in the colonies.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Laser Powder Bed Fusion of anisotropic Nd-Fe-B bonded magnets utilizing an in situ mechanical alignment approach
Authors:
Kilian Schäfer,
Rafael Gitti Tortoretto Fim,
Fernando Maccari,
Tobias Braun,
Stefan Riegg,
Konstantin Skokov,
David Koch,
Enrico Bruder,
Iliya Radulov,
Carlos Henrique Ahrens,
Paulo Antônio Pereira Wendhausen,
Oliver Gutfleisch
Abstract:
Nd-Fe-B bonded magnets are an important class of permanent magnets, employed in many technological sectors. The Additive Manufacturing (AM) processes enables the fabrication of net-shape bonded magnets with complex geometries, allowing to tailor their magnetic stray field specifically for a given application. A crucial challenge to be addressed concerning AM of bonded magnets is the production of…
▽ More
Nd-Fe-B bonded magnets are an important class of permanent magnets, employed in many technological sectors. The Additive Manufacturing (AM) processes enables the fabrication of net-shape bonded magnets with complex geometries, allowing to tailor their magnetic stray field specifically for a given application. A crucial challenge to be addressed concerning AM of bonded magnets is the production of magnetically anisotropic components. The common approaches presented in the literature up to now, required a post-printing procedure or the complex integration of a magnetic field source into the AM process. Here, we present a technique to fabricate anisotropic bonded magnets via Laser Powder Bed Fusion (LPBF) by utilizing the mechanical alignment of anisotropic particles in a single step, without the need for a magnetic field source. Anisotropic bonded magnets were fabricated using a mixture of anisotropic Nd-Fe-B powder (MQA-38-14) and polyamide-12 (PA12). This magnetic powder consists of ellipsoidal particles, where the easy magnetization axis is distributed perpendicular to their longest side, which can be exploited to generate magnetic texture. Depending on the particle size used as feedstock, the degree of alignment (<cos$(θ)$>) can be tailored to a maximum of <cos$(θ)$> = 0.78. The fabricated anisotropic bonded magnets exhibited a maximum remanence of Jr = 377 mT and an energy product of (BH)max = 28.6 kJ/m3, respectively.
△ Less
Submitted 5 May, 2023; v1 submitted 4 May, 2023;
originally announced May 2023.
-
Reactive single-step hot-pressing and magnetocaloric performance of polycrystalline Fe$_2$Al$_{1.15-x}$B$_2$Ge$_x$Ga$_x$ ($x=0, 0.05$) MAB phases
Authors:
Benedikt Beckmann,
Tarek A. El-Melegy,
David Koch,
Ulf Wiedwald,
Michael Farle,
Fernando Maccari,
Joshua Snyder,
Konstantin P. Skokov,
Michel W. Barsoum,
Oliver Gutfleisch
Abstract:
Reactive single-step hot-pressing at 1473 K and 35 MPa for 4 h produces dense, bulk, near single-phase, low-cost and low-criticality Fe$_2$Al$_{1.15}$B$_2$ and Fe$_2$Al$_{1.1}$B$_2$Ge$_{0.05}$Ga$_{0.05}$ MAB samples, showing a second-order magnetic phase transition with favorable magnetocaloric properties around room temperature. The magnetic as well as magnetocaloric properties can be tailored up…
▽ More
Reactive single-step hot-pressing at 1473 K and 35 MPa for 4 h produces dense, bulk, near single-phase, low-cost and low-criticality Fe$_2$Al$_{1.15}$B$_2$ and Fe$_2$Al$_{1.1}$B$_2$Ge$_{0.05}$Ga$_{0.05}$ MAB samples, showing a second-order magnetic phase transition with favorable magnetocaloric properties around room temperature. The magnetic as well as magnetocaloric properties can be tailored upon Ge and Ga doping, leading to an increase of Curie temperature $T_C$ and spontaneous magnetization $m_S$. The maximum isothermal entropy change $Δs_{T,max}$ of hot-pressed Fe$_2$Al$_{1.15}$B$_2$ in magnetic field changes of 2 and 5 T amounts to 2.5 and 5 J(kgK)$^{-1}$ at 287.5 K and increases by Ge and Ga addition to 3.1 and 6.2 J(kgK)$^{-1}$ at 306.5 K, respectively. The directly measured maximum adiabatic temperature change $ΔT_{ad,max}$ is improved by the composition modification from 0.9 to 1.1 K in magnetic field changes of 1.93 T. Overall, we demonstrate that hot-pressing provides a much faster, more scalable and processing cost reducing alternative compared to conventional synthesis routes to produce heat exchangers for magnetic cooling devices. Therefore, our criticality assessment shows that hot-pressed Fe-based MAB phases provide a promising compromise of material and processing cost, criticality and magnetocaloric performance, demonstrating the potential for low-cost and low-criticality magnetocaloric applications around room temperature.
△ Less
Submitted 4 May, 2023; v1 submitted 14 April, 2023;
originally announced April 2023.
-
Additive manufacturing of Ni-Mn-Sn shape memory Heusler alloy -- Microstructure and magnetic properties from powder to printed parts
Authors:
Franziska Scheibel,
Christian Lauhoff,
Philipp Krooß,
Stefan Riegg,
Niklas Sommer,
David Koch,
Konrad Opelt,
Heiner Gutte,
Olena Volkova,
Stefan Böhm,
Thomas Niendorf,
Oliver Gutfleisch
Abstract:
Ni-Mn-based Heusler alloys like Ni-Mn-Sn show an elastocaloric as well as magnetocaloric effect during the magneto-structural phase transition, making this material interesting for solid-state cooling application. Material processing by additive manufacturing can overcome difficulties related to machinability of the alloys, caused by their intrinsic brittleness. Since the magnetic properties and t…
▽ More
Ni-Mn-based Heusler alloys like Ni-Mn-Sn show an elastocaloric as well as magnetocaloric effect during the magneto-structural phase transition, making this material interesting for solid-state cooling application. Material processing by additive manufacturing can overcome difficulties related to machinability of the alloys, caused by their intrinsic brittleness. Since the magnetic properties and transition temperature are highly sensitive to the chemical composition, it is essential to understand and monitoring these properties over the entire processing chain. In the present work the microstructural and magnetic properties from gas-atomized powder to post-processed Ni-Mn-Sn alloy are investigated. Direct energy deposition was used for processing, promoting the evolution of a polycrystalline microstructure being characterized by elongated grains along the building direction. A complete and sharp martensitic transformation can be achieved after applying a subsequent heat treatment at 1173 K for 24 h. The Mn-evaporation of 1.3 at. % and the formation of Mn-oxide during DED-processing lead to an increase of the transition temperature of 45 K and a decrease of magnetization, clearly pointing at the necessity of controlling the composition, oxygen partial pressure and magnetic properties over the entire processing chain.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Dissipation losses limiting first-order phase transition materials in cryogenic caloric cooling: A case study on all-d-metal Ni(-Co)-Mn-Ti Heusler alloys
Authors:
Benedikt Beckmann,
David Koch,
Lukas Pfeuffer,
Tino Gottschall,
Andreas Taubel,
Esmaeil Adabifiroozjaei,
Olga N. Miroshkina,
Stefan Riegg,
Timo Niehoff,
Nagaarjhuna A. Kani,
Markus E. Gruner,
Leopoldo Molina-Luna,
Konstantin P. Skokov,
Oliver Gutfleisch
Abstract:
Ni-Mn-based Heusler alloys, in particular all-d-metal Ni(-Co)-Mn-Ti, are highly promising materials for energy-efficient solid-state refrigeration as large multicaloric effects can be achieved across their magnetostructural martensitic transformation. However, no comprehensive study on the crucially important transition entropy change $Δs_t$ exists so far for Ni(-Co)-Mn-Ti. Here, we present a syst…
▽ More
Ni-Mn-based Heusler alloys, in particular all-d-metal Ni(-Co)-Mn-Ti, are highly promising materials for energy-efficient solid-state refrigeration as large multicaloric effects can be achieved across their magnetostructural martensitic transformation. However, no comprehensive study on the crucially important transition entropy change $Δs_t$ exists so far for Ni(-Co)-Mn-Ti. Here, we present a systematic study analyzing the composition and temperature dependence of $Δs_t$. Our results reveal a substantial structural entropy change contribution of approximately 65 J(kgK)$^{-1}$, which is compensated at lower temperatures by an increasingly negative entropy change associated with the magnetic subsystem. This leads to compensation temperatures $T_{comp}$ of 75 K and 300 K in Ni$_{35}$Co$_{15}$Mn$_{50-y}$Ti$_{y}$ and Ni$_{33}$Co$_{17}$Mn$_{50-y}$Ti$_{y}$, respectively, below which the martensitic transformations are arrested. In addition, we simultaneously measured the responses of the magnetic, structural and electronic subsystems to the temperature- and field-induced martensitic transformation near $T_{comp}$, showing an abnormal increase of hysteresis and consequently dissipation energy at cryogenic temperatures. Simultaneous measurements of magnetization and adiabatic temperature change $ΔT_{ad}$ in pulsed magnetic fields reveal a change in sign of $ΔT_{ad}$ and a substantial positive and irreversible $ΔT_{ad}$ up to 15 K at 15 K as a consequence of increased dissipation losses and decreased heat capacity. Most importantly, this phenomenon is universal, it applies to any first-order material with non-negligible hysteresis and any stimulus, effectively limiting the utilization of their caloric effects for gas liquefaction at cryogenic temperatures.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Suppression of electroconvection due to van der Waals attraction of polymer additives towards the metal electrode
Authors:
Ankush Mukherjee,
Lynden A. Archer,
Donald L. Koch
Abstract:
Electroconvection in rechargeable batteries enhances the growth of dendrites at the electrode surface. The addition of low molecular weight polymers to the electrolyte in batteries results in the formation of a thin layer of higher polymer concentration near the electrode. This is due to van der Waals forces of attraction between the metal electrode and the polymers dissolved in the electrolyte. T…
▽ More
Electroconvection in rechargeable batteries enhances the growth of dendrites at the electrode surface. The addition of low molecular weight polymers to the electrolyte in batteries results in the formation of a thin layer of higher polymer concentration near the electrode. This is due to van der Waals forces of attraction between the metal electrode and the polymers dissolved in the electrolyte. The van der Waals forces act as a restoring body force on the electrolyte and oppose the growth of perturbations. Using linear stability analysis, we show that this force opposes electroconvective flow. This increases the critical voltage required for the onset of electroconvection.
△ Less
Submitted 27 October, 2022;
originally announced October 2022.
-
Steady state extensional rheology of a dilute suspension of spheres in a dilute polymer solution
Authors:
Arjun Sharma,
Donald L. Koch
Abstract:
We investigate the steady-state extensional rheology of a dilute suspension of spherical particles in a dilute polymer solution. For a particle-free polymeric fluid, in addition to the solvent viscosity, the extensional viscosity due to the polymers, $μ^\text{poly}$, contributes to the total non-dimensionalized extensional viscosity $1+μ^\text{poly}$. When a small volume fraction, $φ$, of spheres…
▽ More
We investigate the steady-state extensional rheology of a dilute suspension of spherical particles in a dilute polymer solution. For a particle-free polymeric fluid, in addition to the solvent viscosity, the extensional viscosity due to the polymers, $μ^\text{poly}$, contributes to the total non-dimensionalized extensional viscosity $1+μ^\text{poly}$. When a small volume fraction, $φ$, of spheres is added to a polymeric fluid, the stress is altered by the Einstein viscosity of 2.5$φ$ and two additional stress contributions: the interaction stresslet and the particle-induced polymer stress (PIPS). The net interaction stress is positive at lower Deborah numbers (product of extension rate and polymer relaxation time), $De\lesssim0.5$, and negative at large $De$. Relative to undisturbed flow, the presence of spheres in uniaxial extensional flow creates larger and smaller local stretching regions. Below the coil-stretch transition ($De<0.5$), the polymers far from the particles are in a coiled state, and a wake of stretched polymers forms downstream of the particle as they are stretched by the large stretching regions around the particle. This leads to a positive interaction stresslet (surface) and the PIPS (stretched wake). Beyond the coil-stretch transition, polymers far from the particle are highly stretched, but they collapse closer to the coiled state as they arrive at the low-stretching regions near the particle surface. Therefore, a negative PIPS results from the regions of collapsed polymers. When $De\gtrsim0.6$, the changes in extensional viscosity from the interaction stresslet and the PIPS are $φμ^\text{poly}$ and approximately -1.85$φμ^\text{poly}$, respectively. At large $De$, the polymer extensional viscosity, $μ^\text{poly}$, is large. Therefore, adding particles reduces the extensional viscosity of the suspension ($(2.5-0.85μ^\text{poly})φ<0$).
△ Less
Submitted 30 August, 2022; v1 submitted 27 August, 2022;
originally announced August 2022.
-
Influence of microstructure on the application of Ni-Mn-In Heusler compounds for multicaloric cooling using magnetic field and uniaxial stress
Authors:
Lukas Pfeuffer,
Adrià Gràcia-Condal,
Tino Gottschall,
David Koch,
Tom Faske,
Enrico Bruder,
Jonas Lemke,
Andreas Taubel,
Semih Ener,
Franziska Scheibel,
Karsten Durst,
Konstantin P. Skokov,
Lluís Mañosa,
Antoni Planes,
Oliver Gutfleisch
Abstract:
Novel multicaloric cooling utilizing the giant caloric response of Ni-Mn-based metamagnetic shape-memory alloys to different external stimuli such as magnetic field, uniaxial stress and hydrostatic pressure is a promising candidate for energy-efficient and environmentally-friendly refrigeration. However, the role of microstructure when several external fields are applied simultaneously or sequenti…
▽ More
Novel multicaloric cooling utilizing the giant caloric response of Ni-Mn-based metamagnetic shape-memory alloys to different external stimuli such as magnetic field, uniaxial stress and hydrostatic pressure is a promising candidate for energy-efficient and environmentally-friendly refrigeration. However, the role of microstructure when several external fields are applied simultaneously or sequentially has been scarcely discussed in literature. Here, we synthesized ternary Ni-Mn-In alloys by suction casting and arc melting and analyzed the microstructural influence on the response to magnetic fields and uniaxial stress. By combining SEM-EBSD and stress-strain data, a significant effect of texture on the stress-induced martensitic transformation is revealed. It is shown that a <001> texture can strongly reduce the critical transformation stresses. The effect of grain size on the material failure is demonstrated and its influence on the magnetic-field-induced transformation dynamics is investigated. Temperature-stress and temperature-magnetic field phase diagrams are established and single caloric performances are characterized in terms of $Δ{s_T}$ and $Δ{T_{ad}}$. The cyclic $Δ{T_{ad}}$ values are compared to the ones achieved in the multicaloric exploiting-hysteresis cycle. It turns out that a suction-cast microstructure and the combination of both stimuli enables outstanding caloric effects in moderate external fields which can significantly exceed the single caloric performances. In particular for Ni-Mn-In, the maximum cyclic effect in magnetic fields of 1.9 T is increased by more than 200 % to -4.1 K when a moderate sequential stress of 55 MPa is applied. Our results illustrate the crucial role of microstructure for multicaloric cooling using Ni-Mn-based metamagnetic shape-memory alloys.
△ Less
Submitted 9 November, 2021; v1 submitted 4 November, 2021;
originally announced November 2021.
-
Microstructure engineering of metamagnetic Ni-Mn-based Heusler compounds by Fe-doping: A roadmap towards excellent cyclic stability combined with large elastocaloric and magnetocaloric effects
Authors:
Lukas Pfeuffer,
Jonas Lemke,
Navid Shayanfar,
Stefan Riegg,
David Koch,
Andreas Taubel,
Franziska Scheibel,
Nagaarjhuna A. Kani,
Esmaeil Adabifiroozjaei,
Leopoldo Molina-Luna,
Konstantin P. Skokov,
Oliver Gutfleisch
Abstract:
Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable refrigeration. However, during cyclic operation these alloys suffer from structural and functional fatigue as a result of their high intrinsic brittleness. Here, we present…
▽ More
Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable refrigeration. However, during cyclic operation these alloys suffer from structural and functional fatigue as a result of their high intrinsic brittleness. Here, we present based on Fe-doping of Ni-Mn-In a microstructure design strategy which simultaneously improves cyclic stability and maintains the excellent magnetocaloric and elastocaloric properties. Our results reveal that precipitation of a strongly Fe-enriched and In-depleted coherent secondary gamma-phase at grain boundaries can ensure excellent mechanical stability by hindering intergranular fracture during cyclic loading. In this way, a large elastocaloric effect of -4.5 K was achieved for more than 16000 cycles without structural or functional degradation, which corresponds to an increase of the cyclic stability by more than three orders of magnitude as compared to single-phase Ni-Mn-In-(Fe). In addition, we demonstrate that the large magnetocaloric effect of single-phase Ni-Mn-In-(Fe) can be preserved in the dual-phase material when the secondary gamma-phase is exclusively formed at grain boundaries as the martensitic transformation within the Heusler matrix is barely affected. This way, an adiabatic temperature change of -3 K and an isothermal entropy change of 15 $Jkg^{-1}K^{-1}$ was obtained in 2 T for dual-phase Ni-Mn-In-Fe. We expect that this concept can be applied to other single caloric and mutlicaloric materials, therewith paving the way for solid-state caloric cooling applications.
△ Less
Submitted 4 November, 2021; v1 submitted 2 November, 2021;
originally announced November 2021.
-
Controlling the oxidation of magnetic and electrically conductive solid-solution iron-rhodium nanoparticles synthesized by Laser Ablation in Liquids
Authors:
Ruksan Nadarajah,
Shabbir Tahir,
Joachim Landers,
David Koch,
Anna S. Semisalova,
Jonas Wiemeler,
Ayman El-Zoka,
Se-Ho Kim,
Detlef Utzat,
Rolf Moller,
Baptiste Gault,
Heiko Wende,
Michael Farle,
Bilal Gokce
Abstract:
This study focuses on the synthesis of FeRh nanoparticles via pulsed laser ablation in liquid and on controlling the oxidation of the synthesized nanoparticles. Formation of monomodal γ-FeRh nanoparticles was confirmed by transmission electron microscopy (TEM) and their composition confirmed by atom probe tomography (APT). On these particles, three major contributors to oxidation were analysed: 1)…
▽ More
This study focuses on the synthesis of FeRh nanoparticles via pulsed laser ablation in liquid and on controlling the oxidation of the synthesized nanoparticles. Formation of monomodal γ-FeRh nanoparticles was confirmed by transmission electron microscopy (TEM) and their composition confirmed by atom probe tomography (APT). On these particles, three major contributors to oxidation were analysed: 1) dissolved oxygen in the organic solvents, 2) the bound oxygen in the solvent and 3) oxygen in the atmosphere above the solvent. The decrease of oxidation for optimized ablation conditions was confirmed through energy-dispersive X-ray (EDX) and Mössbauer spectroscopy. Furthermore, the time dependence of oxidation was monitored for dried FeRh nanoparticles powders using ferromagnetic resonance spectroscopy (FMR). By magnetophoretic separation, B2-FeRh nanoparticles could be extracted from the solution and characteristic differences of nanostrand formation between γ-FeRh and B2-FeRh nanoparticles were observed.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Short sighted deep learning
Authors:
Ellen de Melllo Koch,
Anita de Mello Koch,
Nicholas Kastanos,
Ling Cheng
Abstract:
A theory explaining how deep learning works is yet to be developed. Previous work suggests that deep learning performs a coarse graining, similar in spirit to the renormalization group (RG). This idea has been explored in the setting of a local (nearest neighbor interactions) Ising spin lattice. We extend the discussion to the setting of a long range spin lattice. Markov Chain Monte Carlo (MCMC) s…
▽ More
A theory explaining how deep learning works is yet to be developed. Previous work suggests that deep learning performs a coarse graining, similar in spirit to the renormalization group (RG). This idea has been explored in the setting of a local (nearest neighbor interactions) Ising spin lattice. We extend the discussion to the setting of a long range spin lattice. Markov Chain Monte Carlo (MCMC) simulations determine both the critical temperature and scaling dimensions of the system. The model is used to train both a single RBM (restricted Boltzmann machine) network, as well as a stacked RBM network. Following earlier Ising model studies, the trained weights of a single layer RBM network define a flow of lattice models. In contrast to results for nearest neighbor Ising, the RBM flow for the long ranged model does not converge to the correct values for the spin and energy scaling dimension. Further, correlation functions between visible and hidden nodes exhibit key differences between the stacked RBM and RG flows. The stacked RBM flow appears to move towards low temperatures whereas the RG flow moves towards high temperature. This again differs from results obtained for nearest neighbor Ising.
△ Less
Submitted 7 February, 2020;
originally announced February 2020.
-
Is Deep Learning a Renormalization Group Flow?
Authors:
Ellen de Mello Koch,
Robert de Mello Koch,
Ling Cheng
Abstract:
Although there has been a rapid development of practical applications, theoretical explanations of deep learning are in their infancy. Deep learning performs a sophisticated coarse graining. Since coarse graining is a key ingredient of the renormalization group (RG), RG may provide a useful theoretical framework directly relevant to deep learning. In this study we pursue this possibility. A statis…
▽ More
Although there has been a rapid development of practical applications, theoretical explanations of deep learning are in their infancy. Deep learning performs a sophisticated coarse graining. Since coarse graining is a key ingredient of the renormalization group (RG), RG may provide a useful theoretical framework directly relevant to deep learning. In this study we pursue this possibility. A statistical mechanics model for a magnet, the Ising model, is used to train an unsupervised restricted Boltzmann machine (RBM). The patterns generated by the trained RBM are compared to the configurations generated through an RG treatment of the Ising model. Although we are motivated by the connection between deep learning and RG flow, in this study we focus mainly on comparing a single layer of a deep network to a single step in the RG flow. We argue that correlation functions between hidden and visible neurons are capable of diagnosing RG-like coarse graining. Numerical experiments show the presence of RG-like patterns in correlators computed using the trained RBMs. The observables we consider are also able to exhibit important differences between RG and deep learning.
△ Less
Submitted 10 June, 2020; v1 submitted 12 June, 2019;
originally announced June 2019.
-
Spectral Form Factor as an OTOC Averaged over the Heisenberg Group
Authors:
Robert de Mello Koch,
Jia-Hui Huang,
Chen-Te Ma,
Hendrik J. R. Van Zyl
Abstract:
We prove that in bosonic quantum mechanics the two-point spectral form factor can be obtained as an average of the two-point out-of-time ordered correlation function, with the average taken over the Heisenberg group. In quantum field theory, there is an analogous result with the average taken over the tensor product of many copies of the Heisenberg group, one copy for each field mode. The resultin…
▽ More
We prove that in bosonic quantum mechanics the two-point spectral form factor can be obtained as an average of the two-point out-of-time ordered correlation function, with the average taken over the Heisenberg group. In quantum field theory, there is an analogous result with the average taken over the tensor product of many copies of the Heisenberg group, one copy for each field mode. The resulting formula is expressed as a path integral over two fields, providing a promising approach to the computation of the spectral form factor. We develop the formula that we have obtained using a coherent state description from the JC model and also in the context of the large-$N$ limit of CFT and Yang-Mills theory from the large-$N$ matrix quantum mechanics.
△ Less
Submitted 2 June, 2019; v1 submitted 27 May, 2019;
originally announced May 2019.
-
Stability of charges in titanium compounds and charge transfer to oxygen in titanium dioxide
Authors:
Daniel Koch,
Pavlo Golub,
Sergei Manzhos
Abstract:
We investigate the charge density distribution in titanium dioxide, molecular titanium complexes and a variety of periodic titanium compounds using delocalization indices and Bader charge analysis. Our results are in agreement with previous experimental and theoretical investigations on the charge stability and deviation from formal oxidation states in transition metal compounds. We present exampl…
▽ More
We investigate the charge density distribution in titanium dioxide, molecular titanium complexes and a variety of periodic titanium compounds using delocalization indices and Bader charge analysis. Our results are in agreement with previous experimental and theoretical investigations on the charge stability and deviation from formal oxidation states in transition metal compounds. We present examples for practically relevant redox processes, using molecular titanium dioxide model systems, that illustrate the failure of formal oxidation states to account for some redox phenomena. We observe a pronounced charge stability on titanium for trial systems which are expected to be mainly ionic. No environment tested by us is capable to reduce the local titanium charge remainder below one electron.
△ Less
Submitted 29 June, 2018;
originally announced July 2018.
-
The Efficacy of Fiction or More on the Charge State of Ti in TiO2 and Formal Oxidation States
Authors:
Daniel Koch,
Sergei Manzhos
Abstract:
We argue that Ti4+ is not a realistic description of Ti in TiO2.
We argue that Ti4+ is not a realistic description of Ti in TiO2.
△ Less
Submitted 21 July, 2017;
originally announced July 2017.
-
Ab initio study of Li, Mg and Al insertion into rutile VO2: Fast diffusion and enhanced voltages
Authors:
Vadym V. Kulish,
Daniel Koch,
Sergei Manzhos
Abstract:
Vanadium oxides are among the most promising materials that can be used as electrodes in rechargeable metal-ion batteries. In this work, we systematically investigate thermodynamic, electronic and kinetic properties associated with the insertion of Li, Mg and Al atoms in rutile VO2. Using first-principles calculations, we systematically study the structural evolution and voltage curves of LixVO2,…
▽ More
Vanadium oxides are among the most promising materials that can be used as electrodes in rechargeable metal-ion batteries. In this work, we systematically investigate thermodynamic, electronic and kinetic properties associated with the insertion of Li, Mg and Al atoms in rutile VO2. Using first-principles calculations, we systematically study the structural evolution and voltage curves of LixVO2, MgxVO2 and AlxVO2 (0<x<1) compounds. The calculated lithium intercalation voltage starts at 3.50 V for single-atom insertion and decreases to 2.23 V for full lithiation, to the LiVO2 compound, which agrees well with experimental results. The Mg insertion features a plateau about 1.6 V up to Mg0.5VO2 and then another plateau-like region at around 0.5 V up to Mg1VO2. The predicted voltage curve for Al insertion starts at 1.98 V, followed by two plateaus at 1.48 V and 1.17 V. The diffusion barrier of Li, Mg and Al in the tunnel structure of VO2 is 0.06, 0.33 and 0.50 eV, respectively. The demonstrated excellent Li, Mg and Al mobility, high structural stability and high specific capacity suggest a promising potential of rutile VO2 electrodes especially for multivalent batteries.
△ Less
Submitted 3 July, 2017;
originally announced July 2017.
-
On the oxidation state of titanium in titanium dioxide
Authors:
Daniel Koch,
Sergei Manzhos
Abstract:
The oxidation state of titanium in titanium dioxide is commonly assumed to be +4. This assumption is used ubiquitously to rationalize phenomena observed with TiO2. We present a comprehensive electronic structure investigation of Ti ions, TiO2 molecules and TiO2 bulk crystals, using different density functional theory and wave function-based approaches, which suggests a lower oxidation state (+3).…
▽ More
The oxidation state of titanium in titanium dioxide is commonly assumed to be +4. This assumption is used ubiquitously to rationalize phenomena observed with TiO2. We present a comprehensive electronic structure investigation of Ti ions, TiO2 molecules and TiO2 bulk crystals, using different density functional theory and wave function-based approaches, which suggests a lower oxidation state (+3). Specifically, there is evidence of a significant remaining contribution from valence s and d electrons of Ti, including the presence of a nuclear cusp around the Ti core. The charge corresponding to valence s and d states of Ti amounts to 1 e. The commonly assumed picture may therefore have to be revised.
△ Less
Submitted 6 February, 2017;
originally announced February 2017.
-
Bilayer-thickness-mediated interactions between integral membrane proteins
Authors:
Osman Kahraman,
Peter D. Koch,
William S. Klug,
Christoph A. Haselwandter
Abstract:
Hydrophobic thickness mismatch between integral membrane proteins and the surrounding lipid bilayer can produce lipid bilayer thickness deformations. Experiment and theory have shown that protein-induced lipid bilayer thickness deformations can yield energetically favorable bilayer-mediated interactions between integral membrane proteins, and large-scale organization of integral membrane proteins…
▽ More
Hydrophobic thickness mismatch between integral membrane proteins and the surrounding lipid bilayer can produce lipid bilayer thickness deformations. Experiment and theory have shown that protein-induced lipid bilayer thickness deformations can yield energetically favorable bilayer-mediated interactions between integral membrane proteins, and large-scale organization of integral membrane proteins into protein clusters in cell membranes. Within the continuum elasticity theory of membranes, the energy cost of protein-induced bilayer thickness deformations can be captured by considering compression and expansion of the bilayer hydrophobic core, membrane tension, and bilayer bending, resulting in biharmonic equilibrium equations describing the shape of lipid bilayers for a given set of bilayer-protein boundary conditions. Here we develop a combined analytic and numerical methodology for the solution of the equilibrium elastic equations associated with protein-induced lipid bilayer deformations. Our methodology allows accurate prediction of thickness-mediated protein interactions for arbitrary protein symmetries at arbitrary protein separations and relative orientations. We provide exact analytic solutions for cylindrical integral membrane proteins with constant and varying hydrophobic thickness, and develop perturbative analytic solutions for non-cylindrical protein shapes. We complement these analytic solutions, and assess their accuracy, by developing both finite element and finite difference numerical solution schemes. Taken together, the work presented here puts into place an analytic and numerical framework which allows calculation of bilayer-mediated elastic interactions between integral membrane proteins for the complicated protein shapes suggested by structural biology and at the small protein separations most relevant for the crowded membrane environments provided by living cells.
△ Less
Submitted 2 November, 2016;
originally announced November 2016.
-
Architecture and Function of Mechanosensitive Membrane Protein Lattices
Authors:
Osman Kahraman,
Peter D. Koch,
William S. Klug,
Christoph A. Haselwandter
Abstract:
Experiments have revealed that membrane proteins can form two-dimensional clusters with regular translational and orientational protein arrangements, which may allow cells to modulate protein function. However, the physical mechanisms yielding supramolecular organization and collective function of membrane proteins remain largely unknown. Here we show that bilayer-mediated elastic interactions bet…
▽ More
Experiments have revealed that membrane proteins can form two-dimensional clusters with regular translational and orientational protein arrangements, which may allow cells to modulate protein function. However, the physical mechanisms yielding supramolecular organization and collective function of membrane proteins remain largely unknown. Here we show that bilayer-mediated elastic interactions between membrane proteins can yield regular and distinctive lattice architectures of protein clusters, and may provide a link between lattice architecture and lattice function. Using the mechanosensitive channel of large conductance (MscL) as a model system, we obtain relations between the shape of MscL and the supramolecular architecture of MscL lattices. We predict that the tetrameric and pentameric MscL symmetries observed in previous structural studies yield distinct lattice architectures of MscL clusters and that, in turn, these distinct MscL lattice architectures yield distinct lattice activation barriers. Our results suggest general physical mechanisms linking protein symmetry, the lattice architecture of membrane protein clusters, and the collective function of membrane protein lattices.
△ Less
Submitted 2 November, 2016;
originally announced November 2016.
-
Towards a fully size-consistent method of increments
Authors:
E. Fertitta,
D. Koch,
B. Paulus,
G. Barcza,
Ö. Legeza
Abstract:
The method of increments (MoI) allows one to successfully calculate cohesive energies of bulk materials with high accuracy, but it encounters difficulties when calculating whole dissociation curves. The reason is that its standard formalism is based on a single Hartree-Fock (HF) configuration whose orbitals are localized and used for the many-body expansion. Therefore, in those situations where HF…
▽ More
The method of increments (MoI) allows one to successfully calculate cohesive energies of bulk materials with high accuracy, but it encounters difficulties when calculating whole dissociation curves. The reason is that its standard formalism is based on a single Hartree-Fock (HF) configuration whose orbitals are localized and used for the many-body expansion. Therefore, in those situations where HF does not allow a size-consistent description of the dissociation, the MoI cannot yield proper results either. Herein we address the problem by employing a size-consistent multiconfigurational reference for the MoI formalism. This leads to a matrix equation where a coupling derived by the reference itself is employed. In principle, such approach allows one to evaluate approximate values for the ground as well as excited states energies. While the latter are accurate close to the avoided crossing only, the ground state results are very promising for the whole dissociation curve, as shown by the comparison with density matrix renormalization group (DMRG) benchmarks. We tested this two-state constant-coupling (TSCC)-MoI on beryllium rings of different sizes and studied the error introduced by the constant coupling.
△ Less
Submitted 12 May, 2016;
originally announced May 2016.
-
Dynamics of a stiff biopolymer in an actively contractile background: buckling, stiffening and negative dissipation
Authors:
Norio Kikuchi,
Allen Ehrlicher,
Daniel Koch,
Josef A. Käs,
Sriram Ramaswamy,
Madan Rao
Abstract:
We present a generic theory for the dynamics of a stiff filament under tension, in an active medium with orientational correlations, such as a microtubule in contractile actin. In sharp contrast to the case of a passive medium, we find the filament can stiffen, and possibly oscillate, \textit{or} buckle, depending on the contractile or tensile nature of the activity \textit{and} the filament-med…
▽ More
We present a generic theory for the dynamics of a stiff filament under tension, in an active medium with orientational correlations, such as a microtubule in contractile actin. In sharp contrast to the case of a passive medium, we find the filament can stiffen, and possibly oscillate, \textit{or} buckle, depending on the contractile or tensile nature of the activity \textit{and} the filament-medium anchoring interaction. We present experiments on the behaviour of microtubules in the growth cone of a neuron, which provide evidence for these apparently opposing behaviours. We also demonstrate a strong violation of the fluctuation-dissipation (FD) relation in the effective dynamics of the filament, including a negative FD ratio. Our approach is also of relevance to the dynamics of axons, and our model equations bear a remarkable formal similarity to those in recent work [PNAS (2001) {\bf 98}:14380-14385] on auditory hair cells. Detailed tests of our predictions can be made using a single filament in actomyosin extracts or bacterial suspensions.
△ Less
Submitted 26 January, 2009;
originally announced January 2009.
