-
Lattice Boltzmann methods for soft flowing matter
Authors:
A. Tiribocchi,
M. Durve,
M. Lauricella,
A. Montessori,
J. M. Tucny,
S. Succi
Abstract:
Over the last decade, the Lattice Boltzmann method has found major scope for the simulation of a large spectrum of problems in soft matter, from multiphase and multi-component microfluidic flows, to foams, emulsions, colloidal flows, to name but a few. Crucial to many such applications is the role of supramolecular interactions which occur whenever mesoscale structures, such as bubbles or droplets…
▽ More
Over the last decade, the Lattice Boltzmann method has found major scope for the simulation of a large spectrum of problems in soft matter, from multiphase and multi-component microfluidic flows, to foams, emulsions, colloidal flows, to name but a few. Crucial to many such applications is the role of supramolecular interactions which occur whenever mesoscale structures, such as bubbles or droplets, come in close contact, say of the order of tens of nanometers. Regardless of their specific physico-chemical origin, such near-contact interactions are vital to preserve the coherence of the mesoscale structures against coalescence phenomena promoted by capillarity and surface tension, hence the need of including them in Lattice Boltzmann schemes. Strictly speaking, this entails a complex multiscale problem, covering about six spatial decades, from centimeters down to tens of nanometers, and almost twice as many in time. Such a multiscale problem can hardly be taken by a single computational method, hence the need for coarse-grained models for the near-contact interactions. In this review, we shall discuss such coarse-grained models and illustrate their application to a variety of soft flowing matter problems, such as soft flowing crystals, strongly confined dense emulsions, flowing hierarchical emulsions, soft granular flows, as well as the transmigration of active droplets across constrictions. Finally, we conclude with a few considerations on future developments in the direction of quantum-nanofluidics, machine learning, and quantum computing for soft flows applications.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Spontaneous motion of a passive fluid droplet in an active microchannel
Authors:
A. Tiribocchi,
M. Durve,
M. Lauricella,
A. Montessori,
S. Succi
Abstract:
We numerically study the dynamics of a passive fluid droplet confined within a microchannel whose walls are covered with a thin layer of active gel. The latter represents a fluid of extensile material modelling, for example, a suspension of cytoskeletal filaments and molecular motors. Our results show that the layer is capable of producing a spontaneous flow triggering a rectilinear motion of the…
▽ More
We numerically study the dynamics of a passive fluid droplet confined within a microchannel whose walls are covered with a thin layer of active gel. The latter represents a fluid of extensile material modelling, for example, a suspension of cytoskeletal filaments and molecular motors. Our results show that the layer is capable of producing a spontaneous flow triggering a rectilinear motion of the passive droplet. For a hybrid design (a single wall covered by the active layer), at the steady state the droplet attains an elliptical shape, resulting from an asymmetric saw-toothed structure of the velocity field. On the contrary, if the active gel covers both walls, the velocity field exhibits a fully symmetric pattern considerably mitigating morphological deformations. We further show that the structure of the spontaneous flow in the microchannel can be controlled by the anchoring conditions of the active gel at the wall. These findings are also confirmed by selected 3D simulations. Our results may stimulate further research addressed to design novel microfludic devices whose functioning relies on the collective properties of active gels.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Multiscale Hybrid Modeling of Proteins in Solvent: SARS-CoV2 Spike Protein as test case for Lattice Boltzmann -- All Atom Molecular Dynamics Coupling
Authors:
Marco Lauricella,
Letizia Chiodo,
Fabio Bonaccorso,
Mihir Durve,
Andrea Montessori,
Adriano Tiribocchi,
Alessandro Loppini,
Simonetta Filippi,
Sauro Succi
Abstract:
Physiological solvent flows surround biological structures triggering therein collective motions. Notable examples are virus/host-cell interactions and solvent-mediated allosteric regulation. The present work describes a multiscale approach joining the Lattice Boltzmann fluid dynamics (for solvent flows) with the all-atom atomistic molecular dynamics (for proteins) to model functional interactions…
▽ More
Physiological solvent flows surround biological structures triggering therein collective motions. Notable examples are virus/host-cell interactions and solvent-mediated allosteric regulation. The present work describes a multiscale approach joining the Lattice Boltzmann fluid dynamics (for solvent flows) with the all-atom atomistic molecular dynamics (for proteins) to model functional interactions between flows and molecules. We present, as an applicative scenario, the study of the SARS-CoV-2 virus spike glycoprotein protein interacting with the surrounding solvent, modeled as a mesoscopic fluid. The equilibrium properties of the wild-type spike and of the Alpha variant in implicit solvent are described by suitable observables. The mesoscopic solvent description is critically compared to the all-atom solvent model, to quantify the advantages and limitations of the mesoscopic fluid description.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
Lightweight Lattice Boltzmann
Authors:
Adriano Tiribocchi,
Andrea Montessori,
Giorgio Amati,
Massimo Bernaschi,
Fabio Bonaccorso,
Sergio Orlandini,
Sauro Succi,
Marco Lauricella
Abstract:
A GPU-accelerated version of the lattice Boltzmann method for efficient simulation of soft materials is introduced. Unlike standard approaches, this method reconstructs the distribution functions from available hydrodynamic variables (density, momentum, and pressure tensor) without storing the full set of discrete populations. This scheme shows satisfactory numerical stability, significantly lower…
▽ More
A GPU-accelerated version of the lattice Boltzmann method for efficient simulation of soft materials is introduced. Unlike standard approaches, this method reconstructs the distribution functions from available hydrodynamic variables (density, momentum, and pressure tensor) without storing the full set of discrete populations. This scheme shows satisfactory numerical stability, significantly lower memory requirements, and data access cost. A series of benchmark tests of relevance to soft matter, such as collisions of fluid droplets, is discussed to validate the method. The results can be of particular interest for high-performance simulations of soft matter systems on future exascale computers.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
Shapes and dynamic regimes of a polar active fluid droplet under confinement
Authors:
Adriano Tiribocchi,
Mihir Durve,
Marco Lauricella,
Andrea Montessori,
Davide Marenduzzo,
Sauro Succi
Abstract:
Active droplets are artificial microswimmers built from a liquid dispersion by microfluidic tools and showing self-propelled motion. These systems hold particular interest for mimicking biological phenomena, such as some aspects of cell locomotion and collective behaviors of bacterial colonies, as well as for the design of droplet-based biologically inspired materials, such as engineered tissues.…
▽ More
Active droplets are artificial microswimmers built from a liquid dispersion by microfluidic tools and showing self-propelled motion. These systems hold particular interest for mimicking biological phenomena, such as some aspects of cell locomotion and collective behaviors of bacterial colonies, as well as for the design of droplet-based biologically inspired materials, such as engineered tissues. Growing evidence suggests that geometrical confinement crucially affects their morphology and motility, but the driving physical mechanisms are still poorly understood. Here we study the effect of activity on a droplet containing a contractile polar fluid confined within microfluidic channels of various sizes. We find a surprising wealth of shapes and dynamic regimes, whose mechanics is regulated by a subtle interplay between contractile stress, droplet elasticity and microchannel width. They range from worm-like and cell-like shaped droplets displaying an oscillating behavior within wider channels to bullet-shaped droplets exhibiting rectilinear motion in narrower slits. Our findings support the view that geometrical confinement can provide a viable strategy to control and predict the propulsion direction of active droplets. It would be of interest to look for analogues of these motility modes in biological cells or in synthetic active matter.
△ Less
Submitted 16 May, 2023; v1 submitted 17 August, 2022;
originally announced August 2022.
-
Machine learning assisted droplet trajectories extraction in dense emulsions and their analysis
Authors:
Mihir Durve,
Adriano Tiribocchi,
Andrea Montessori,
Marco Lauricella,
Sauro Succi
Abstract:
This work analyzes trajectories obtained by YOLO and DeepSORT algorithms of dense emulsion systems simulated by Lattice Boltzmann methods. The results indicate that the individual droplet's moving direction is influenced more by the droplets immediately behind it than the droplets in front of it. The analysis also provides hints on constraints on writing down a dynamical model of droplets for the…
▽ More
This work analyzes trajectories obtained by YOLO and DeepSORT algorithms of dense emulsion systems simulated by Lattice Boltzmann methods. The results indicate that the individual droplet's moving direction is influenced more by the droplets immediately behind it than the droplets in front of it. The analysis also provides hints on constraints on writing down a dynamical model of droplets for the dense emulsion in narrow channels.
△ Less
Submitted 20 June, 2022; v1 submitted 8 June, 2022;
originally announced June 2022.
-
The crucial role of adhesion in the transmigration of active droplets through interstitial orifices
Authors:
A. Tiribocchi,
M. Durve,
M. Lauricella,
A. Montessori,
D. Marenduzzo,
S. Succi
Abstract:
Active fluid droplets are a class of soft materials exhibiting autonomous motion sustained by an energy supply. Such systems have been shown to capture motility regimes typical of biological cells and are ideal candidates as building-block for the fabrication of soft biomimetic materials of interest in pharmacology, tissue engineering and lab on chip devices. While their behavior is well establish…
▽ More
Active fluid droplets are a class of soft materials exhibiting autonomous motion sustained by an energy supply. Such systems have been shown to capture motility regimes typical of biological cells and are ideal candidates as building-block for the fabrication of soft biomimetic materials of interest in pharmacology, tissue engineering and lab on chip devices. While their behavior is well established in unconstrained environments, much less is known about their dynamics under strong confinement. Here, we numerically study the physics of a droplet of active polar fluid migrating within a microchannel hosting a constriction with adhesive properties, and report evidence of a striking variety of dynamic regimes and morphological features, whose properties crucially depend upon droplet speed and elasticity, degree of confinement within the constriction and adhesiveness to the pore. Our results suggest that non-uniform adhesion forces are instrumental in enabling the crossing through narrow orifices, in contrast to larger gaps where a careful balance between speed and elasticity is sufficient to guarantee the transition. These observations may be useful for improving the design of artificial micro-swimmers, of interest in material science and pharmaceutics, and potentially for cell sorting in microfluidic devices.
△ Less
Submitted 28 February, 2023; v1 submitted 5 May, 2022;
originally announced May 2022.
-
Stochastic jetting and dripping in confined soft granular flows
Authors:
Michał Bogdan,
Andrea Montessori,
Adriano Tiribocchi,
Fabio Bonaccorso,
Marco Lauricella,
Leon Jurkiewicz,
Sauro Succi,
Jan Guzowski
Abstract:
We report new dynamical modes in confined soft granular flows, such as stochastic jetting and dripping, with no counterpart in continuum viscous fluids. The new modes emerge as a result of the propagation of the chaotic behaviour of individual grains -- here, monodisperse emulsion droplets to the level of the entire system as the emulsion is focused into a narrow orifice by an external viscous flo…
▽ More
We report new dynamical modes in confined soft granular flows, such as stochastic jetting and dripping, with no counterpart in continuum viscous fluids. The new modes emerge as a result of the propagation of the chaotic behaviour of individual grains -- here, monodisperse emulsion droplets to the level of the entire system as the emulsion is focused into a narrow orifice by an external viscous flow. We observe avalanching dynamics and the formation of remarkably stable jets -- singlefile granular chains -- which occasionally break, resulting in a non-Gaussian distribution of cluster sizes. We find that the sequences of droplet rearrangements that lead to the formation of such chains resemble unfolding of cancer cell clusters in narrow capillaries, overall demonstrating that microfluidic emulsion systems could serve to model various aspects of soft granular flows, including also tissue dynamics at the meso-scale.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
Curvature dynamics and long-range effects on fluid-fluid interfaces with colloids
Authors:
A. Tiribocchi,
F. Bonaccorso,
M. Lauricella,
S. Melchionna,
A. Montessori,
S. Succi
Abstract:
We investigate the dynamics of a phase-separating binary fluid, containing colloidal dumbbells anchored to the fluid-fluid interface. Extensive Lattice Boltzmann-Immersed Boundary method simulations reveal that the presence of soft dumbbells can significantly affect the curvature dynamics of the interface between phase-separating fluids, even though the coarsening dynamics is left nearly unchanged…
▽ More
We investigate the dynamics of a phase-separating binary fluid, containing colloidal dumbbells anchored to the fluid-fluid interface. Extensive Lattice Boltzmann-Immersed Boundary method simulations reveal that the presence of soft dumbbells can significantly affect the curvature dynamics of the interface between phase-separating fluids, even though the coarsening dynamics is left nearly unchanged. In addition, our results show that the curvature dynamics exhibits distinct non-local effects, which might be exploited for the design of new soft mesoscale materials. We point out that the inspection of the statistical dynamics of the curvature can disclose new insights into local inhomogeneities of the binary fluid configuration, as a function of the volume fraction and aspect ratio of the dumbbells.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
Dynamics of polydisperse multiple emulsions in microfluidic channels
Authors:
A. Tiribocchi,
A. Montessori,
M. Durve,
F. Bonaccorso,
M. Lauricella,
S. Succi
Abstract:
Multiple emulsions are a class of soft fluid in which small drops are immersed within a larger one and stabilized over long periods of time by a surfactant. We recently showed that, if a monodisperse multiple emulsion is subject to a pressure-driven flow, a wide variety of nonequilibrium steady states emerges at late times, whose dynamics relies on a complex interplay between hydrodynamic interact…
▽ More
Multiple emulsions are a class of soft fluid in which small drops are immersed within a larger one and stabilized over long periods of time by a surfactant. We recently showed that, if a monodisperse multiple emulsion is subject to a pressure-driven flow, a wide variety of nonequilibrium steady states emerges at late times, whose dynamics relies on a complex interplay between hydrodynamic interactions and multibody collisions among internal drops. In this work, we use lattice Boltzmann simulations to study the dynamics of polydisperse double emulsions driven by a Poiseuille flow within a microfluidic channel. Our results show that their behavior is critically affected by multiple factors, such as initial position, polydispersity index, and area fraction occupied within the emulsion. While at low area fraction inner drops may exhibit either a periodic rotational motion (at low polydispersity) or arrange into nonmotile configurations (at high polydispersity) located far from each other, at larger values of area fraction they remain in tight contact and move unidirectionally. This decisively conditions their close-range dynamics, quantitatively assessed through a time-efficiency-like factor. Simulations also unveil the key role played by the capsule, whose shape changes can favor the formation of a selected number of nonequilibrium states in which both motile and nonmotile configurations are found.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Electric Field Induced Macroscopic Cellular Phase of Nanoparticles
Authors:
Abigail Rendos,
Wenhan Cao,
Margaret Chern,
Marco Lauricella,
Sauro Succi,
Joerg G. Werner,
Allison M. Dennis,
Keith A. Brown
Abstract:
A suspension of nanoparticles with very low volume fraction is found to assemble into a macroscopic cellular phase under the collective influence of AC and DC voltages. Systematic study of this phase transition shows that it was the result of electrophoretic assembly into a two-dimensional configuration followed by spinodal decomposition into particle-rich walls and particle-poor cells mediated pr…
▽ More
A suspension of nanoparticles with very low volume fraction is found to assemble into a macroscopic cellular phase under the collective influence of AC and DC voltages. Systematic study of this phase transition shows that it was the result of electrophoretic assembly into a two-dimensional configuration followed by spinodal decomposition into particle-rich walls and particle-poor cells mediated principally by electrohydrodynamic flow. This mechanistic understanding reveals two characteristics needed for a cellular phase to form, namely 1) a system that is considered two dimensional and 2) short-range attractive, long-range repulsive interparticle interactions. In addition to determining the mechanism underpinning the formation of the cellular phase, this work presents a method to reversibly assemble microscale continuous structures out of nanoscale particles in a manner that may enable the creation of materials that impact diverse fields including energy storage and filtration.
△ Less
Submitted 30 November, 2021;
originally announced December 2021.
-
Tracking droplets in soft granular flows with deep learning techniques
Authors:
Mihir Durve,
Fabio Bonaccorso,
Andrea Montessori,
Marco Lauricella,
Adriano Tiribocchi,
Sauro Succi
Abstract:
The state-of-the-art deep learning-based object recognition YOLO algorithm and object tracking DeepSORT algorithm are combined to analyze digital images from fluid dynamic simulations of multi-core emulsions and soft flowing crystals and to track moving droplets within these complex flows. The YOLO network was trained to recognize the droplets with synthetically prepared data, thereby bypassing th…
▽ More
The state-of-the-art deep learning-based object recognition YOLO algorithm and object tracking DeepSORT algorithm are combined to analyze digital images from fluid dynamic simulations of multi-core emulsions and soft flowing crystals and to track moving droplets within these complex flows. The YOLO network was trained to recognize the droplets with synthetically prepared data, thereby bypassing the labor-intensive data acquisition process. In both applications, the trained YOLO + DeepSORT procedure performs with high accuracy on the real data from the fluid simulations, with low error levels in the inferred trajectories of the droplets and independently computed ground truth. Moreover, using commonly used desktop GPUs, the developed application is capable of analyzing data at speeds that exceed the typical image acquisition rates of digital cameras (30 fps), opening the interesting prospect of realizing a low-cost and practical tool to study systems with many moving objects, mostly but not exclusively, biological ones. Besides its practical applications, the procedure presented here marks the first step towards the automatic extraction of effective equations of motion of many-body soft flowing systems.
△ Less
Submitted 4 July, 2021;
originally announced July 2021.
-
Shear dynamics of polydisperse double emulsions
Authors:
A. Tiribocchi,
A. Montessori,
F. Bonaccorso,
M. Lauricella,
S. Succi
Abstract:
We numerically study the dynamics of a polydisperse double emulsion under a symmetric shear flow. We show that both dispersity and shear rate crucially affect the behavior of the innermost drops and of the surrounding shell. While at low/moderate values of shear rates the inner drops rotate periodically around a common center of mass triggered by the fluid vortex formed within the emulsion general…
▽ More
We numerically study the dynamics of a polydisperse double emulsion under a symmetric shear flow. We show that both dispersity and shear rate crucially affect the behavior of the innermost drops and of the surrounding shell. While at low/moderate values of shear rates the inner drops rotate periodically around a common center of mass triggered by the fluid vortex formed within the emulsion generally regardless of their polydispersity, at higher values such dynamics occurs only at increasing polydispersity, since monodisperse drops are found to align along the shear flow and become approximately motionless at late times. Our simulations also suggest that increasing polydispersity favours close-range contacts among cores and persistent collisions, while hindering shape deformations of the external droplet. A quantitative evaluation of these effects is also provided.
△ Less
Submitted 24 March, 2021;
originally announced March 2021.
-
A fast and efficient deep learning procedure for tracking droplet motion in dense microfluidic emulsions
Authors:
Mihir Durve,
Fabio Bonaccorso,
Andrea Montessori,
Marco Lauricella,
Adriano Tiribocchi,
Sauro Succi
Abstract:
We present a deep learning-based object detection and object tracking algorithm to study droplet motion in dense microfluidic emulsions. The deep learning procedure is shown to correctly predict the droplets' shape and track their motion at competitive rates as compared to standard clustering algorithms, even in the presence of significant deformations. The deep learning technique and tool develop…
▽ More
We present a deep learning-based object detection and object tracking algorithm to study droplet motion in dense microfluidic emulsions. The deep learning procedure is shown to correctly predict the droplets' shape and track their motion at competitive rates as compared to standard clustering algorithms, even in the presence of significant deformations. The deep learning technique and tool developed in this work could be used for the general study of the dynamics of biological agents in fluid systems, such as moving cells and self-propelled micro organisms in complex biological flows.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
Microscale modelling of dielectrophoresis assembly processes
Authors:
Adriano Tiribocchi,
Andrea Montessori,
Marco Lauricella,
Fabio Bonaccorso,
Keith A. Brown,
Sauro Succi
Abstract:
This work presents a microscale approach for simulating the dielectrophoresis (DEP) assembly of polarizable particles under an external electric field. The model is shown to capture interesting dynamical and topological features, such as the formation of chains of particles and their incipient aggregation into hierarchical structures. A quantitative characterization in terms of the number and size…
▽ More
This work presents a microscale approach for simulating the dielectrophoresis (DEP) assembly of polarizable particles under an external electric field. The model is shown to capture interesting dynamical and topological features, such as the formation of chains of particles and their incipient aggregation into hierarchical structures. A quantitative characterization in terms of the number and size of these structures is also discussed. This computational model could represent a viable numerical tool to study the mechanical properties of particle-based hierarchical materials and suggest new strategies for enhancing their design and manufacture.
△ Less
Submitted 30 January, 2021;
originally announced February 2021.
-
Wet to dry self-transitions in dense emulsions: from order to disorder and back
Authors:
Andrea Montessori,
Marco Lauricella,
Adriano Tiribocchi,
Fabio Bonaccorso,
Sauro Succi
Abstract:
One of the most distinctive hallmarks of many-body systems far from equilibrium is the spontaneous emergence of order under conditions where disorder would be plausibly expected. Here, we report on the self-transition between ordered and disordered emulsions in divergent microfluidic channels, i.e. from monodisperse assemblies to heterogeneous polydisperse foam-like structures, and back again to o…
▽ More
One of the most distinctive hallmarks of many-body systems far from equilibrium is the spontaneous emergence of order under conditions where disorder would be plausibly expected. Here, we report on the self-transition between ordered and disordered emulsions in divergent microfluidic channels, i.e. from monodisperse assemblies to heterogeneous polydisperse foam-like structures, and back again to ordered ones. The transition is driven by the nonlinear competition between viscous dissipation and surface tension forces as controlled by the device geometry, particularly the aperture angle of the divergent microfluidic channel. An unexpected route back to order is observed in the regime of large opening angles, where a trend towards increasing disorder would be intuitively expected.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
Concentrated phase emulsion with multi-core morphology under shear: A numerical study
Authors:
A. Tiribocchi,
A. Montessori,
F. Bonaccorso,
M. Lauricella,
S. Succi
Abstract:
We numerically study the dynamic behavior under a symmetric shear flow of selected examples of concentrated phase emulsions with multi-core morphology confined within a microfluidic channel. A variety of new nonequilibrium steady states is reported. Under low shear rates, the emulsion is found to exhibit a solid-like behavior, in which cores display a periodic planetary-like motion with approximat…
▽ More
We numerically study the dynamic behavior under a symmetric shear flow of selected examples of concentrated phase emulsions with multi-core morphology confined within a microfluidic channel. A variety of new nonequilibrium steady states is reported. Under low shear rates, the emulsion is found to exhibit a solid-like behavior, in which cores display a periodic planetary-like motion with approximately equal angular velocity. At higher shear rates two steady states emerge, one in which all inner cores align along the flow and become essentially motionless and a further one in which some cores accumulate near the outer interface and produce a dynamical elliptical-shaped ring chain, reminiscent of a treadmilling-like structure, while others occupy the center of the emulsion. A quantitative description in terms of i) motion of the cores, ii) rate of deformation of the emulsion and iii) structure of the fluid flow within the channel is also provided.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
-
Micro-vorticity fluctuations affect the structure of thin fluid films
Authors:
A. Tiribocchi,
A. Montessori,
S. Miliani,
M. Lauricella,
M. La Rocca,
S. Succi
Abstract:
The dynamic interaction of complex fluid interfaces is highly sensitive to near-contact interactions occurring at the scale of ten of nanometers. Such interactions are difficult to analyse because they couple self-consistently to the dynamic morphology of the evolving interface, as well as to the hydrodynamics of the interstitial fluid film. In this work, we show that, above a given magnitude thre…
▽ More
The dynamic interaction of complex fluid interfaces is highly sensitive to near-contact interactions occurring at the scale of ten of nanometers. Such interactions are difficult to analyse because they couple self-consistently to the dynamic morphology of the evolving interface, as well as to the hydrodynamics of the interstitial fluid film. In this work, we show that, above a given magnitude threshold, near-contact interactions trigger non-trivial micro-vorticity patterns, which in turn affect the effective near-contact interactions, giving rise to persistent fluctuating ripples at the fluid interface. In such regime, near-contact interactions may significantly affect the macroscopic arrangement of emulsion configurations, such as those arising in soft-flowing microfluidic crystals.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
The vortex-driven dynamics of droplets within droplets
Authors:
A. Tiribocchi,
A. Montessori,
M. Lauricella,
F. Bonaccorso,
S. Succi,
S. Aime,
M. Milani,
D. A. Weitz
Abstract:
Understanding the fluid-structure interaction is crucial for an optimal design and manufacturing of soft mesoscale materials. Multi-core emulsions are a class of soft fluids assembled from cluster configurations of deformable oil-water double droplets (cores), often employed as building-blocks for the realisation of devices of interest in bio-technology, such as drug-delivery, tissue engineering a…
▽ More
Understanding the fluid-structure interaction is crucial for an optimal design and manufacturing of soft mesoscale materials. Multi-core emulsions are a class of soft fluids assembled from cluster configurations of deformable oil-water double droplets (cores), often employed as building-blocks for the realisation of devices of interest in bio-technology, such as drug-delivery, tissue engineering and regenerative medicine. Here, we study the physics of multi-core emulsions flowing in microfluidic channels and report numerical evidence of a surprisingly rich variety of driven non-equilibrium states (NES), whose formation is caused by a dipolar fluid vortex triggered by the sheared structure of the flow carrier within the microchannel. The observed dynamic regimes range from long-lived NES at low core-area fraction, characterised by a planetary-like motion of the internal drops, to short-lived ones at high core-area fraction, in which a pre-chaotic motion results from multi-body collisions of inner drops, as combined with self-consistent hydrodynamic interactions. The onset of pre-chaotic behavior is marked by transitions of the cores from one vortex to another, a process that we interpret as manifestations of the system to maximize its entropy by filling voids, as they arise dynamically within the capsule.
△ Less
Submitted 11 January, 2021; v1 submitted 25 April, 2020;
originally announced April 2020.
-
LBsoft: a parallel open-source software for simulation of colloidal systems
Authors:
Fabio Bonaccorso,
Andrea Montessori,
Adriano Tiribocchi,
Giorgio Amati,
Massimo Bernaschi,
Marco Lauricella,
Sauro Succi
Abstract:
We present LBsoft, an open-source software developed mainly to simulate the hydro-dynamics of colloidal systems based on the concurrent coupling between lattice Boltzmann methods for the fluid and discrete particle dynamics for the colloids. Such coupling has been developed before, but, to the best of our knowledge, no detailed discussion of the programming issues to be faced in order to attain ef…
▽ More
We present LBsoft, an open-source software developed mainly to simulate the hydro-dynamics of colloidal systems based on the concurrent coupling between lattice Boltzmann methods for the fluid and discrete particle dynamics for the colloids. Such coupling has been developed before, but, to the best of our knowledge, no detailed discussion of the programming issues to be faced in order to attain efficient implementation on parallel architectures, has ever been presented to date. In this paper, we describe in detail the underlying multi-scale models, their coupling procedure, along side with a description of the relevant input variables, to facilitate third-parties usage. The code is designed to exploit parallel computing platforms, taking advantage also of the recent AVX-512 instruction set. We focus on LBsoft structure, functionality, parallel implementation, performance and availability, so as to facilitate the access to this computational tool to the research community in the field. The capabilities of LBsoft are highlighted for a number of prototypical case studies, such as pickering emulsions, bicontinuous systems, as well as an original study of the coarsening process in confined bijels under shear.
△ Less
Submitted 2 July, 2020; v1 submitted 8 April, 2020;
originally announced April 2020.
-
Multiparticle collision dynamics for fluid interfaces with near-contact interactions
Authors:
Andrea Montessori,
Marco Lauricella,
Adriano Tiribocchi,
Fabio Bonaccorso,
Sauro Succi
Abstract:
We present an extension of the multiparticle collision dynamics method for flows with complex interfaces, including supramolecular near-contact interactions mimicking the effect of surfactants. The new method is demonstrated for the case of (i) short range repulsion of droplets in close contact, (ii) arrested phase separation and (iii) different pattern formation during spinodal decomposition of b…
▽ More
We present an extension of the multiparticle collision dynamics method for flows with complex interfaces, including supramolecular near-contact interactions mimicking the effect of surfactants. The new method is demonstrated for the case of (i) short range repulsion of droplets in close contact, (ii) arrested phase separation and (iii) different pattern formation during spinodal decomposition of binary mixtures.
△ Less
Submitted 26 March, 2020;
originally announced March 2020.
-
Lattice Boltzmann simulations capture the multiscale physics of soft flowing crystals
Authors:
Andrea Montessori,
Adriano Tiribocchi,
Fabio Bonaccorso,
Marco Lauricella,
Sauro Succi
Abstract:
The study of the underlying physics of soft flowing materials depends heavily on numerical simulations, due to the complex structure of the governing equations reflecting the competition of concurrent mechanisms acting at widely disparate scales in space and time. A full-scale computational modelling remains a formidable challenge since it amounts to simultaneously handle six or more spatial decad…
▽ More
The study of the underlying physics of soft flowing materials depends heavily on numerical simulations, due to the complex structure of the governing equations reflecting the competition of concurrent mechanisms acting at widely disparate scales in space and time. A full-scale computational modelling remains a formidable challenge since it amounts to simultaneously handle six or more spatial decades in space and twice as many in time. Coarse-grained methods often provide a viable strategy to significantly mitigate this issue, through the implementation of mesoscale supramolecular forces designed to capture the essential physics at a fraction of the computational cost of a full-detail description.
Here, we review some recent advances in the design of a lattice Boltzmann mesoscale approach for soft flowing materials, inclusive of near-contact interactions (NCI) between dynamic interfaces, as they occur in high packing-fraction soft flowing crystals.
The method proves capable of capturing several aspects of the rheology of soft flowing crystals, namely, i) a 3/2 power-law dependence of the dispersed phase flow rate on the applied pressure gradient, ii) the structural transition between an ex-two and ex-one (bamboo) configurations with the associated drop of the flow rate, iii) the onset of interfacial waves once NCI is sufficiently intense.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Novel non-equilibrium steady states in multiple emulsions
Authors:
A. Tiribocchi,
A. Montessori,
S. Aime,
M. Milani,
M. Lauricella,
S. Succi,
D. Weitz
Abstract:
We numerically investigate the rheological response of a non-coalescing multiple emulsion under a symmetric shear flow. We find that the dynamics significantly depends on the magnitude of the shear rate and on the number of the encapsulated droplets, two key parameters whose control is fundamental to accurately select the resulting non-equilibrium steady states. The double emulsion, for instance,…
▽ More
We numerically investigate the rheological response of a non-coalescing multiple emulsion under a symmetric shear flow. We find that the dynamics significantly depends on the magnitude of the shear rate and on the number of the encapsulated droplets, two key parameters whose control is fundamental to accurately select the resulting non-equilibrium steady states. The double emulsion, for instance, attains a static steady state in which the external droplet stretches under flow and achieves an elliptical shape (closely resembling the one observed in a sheared isolated fluid droplet), while the internal one remains essentially unaffected. Novel non-equilibrium steady states arise in a multiple emulsion. Under a low/moderate shear rates, for instance, the encapsulated droplets display a non-trivial planetary-like motion that considerably affects the shape of the external droplet. Some features of this dynamic behavior are partially captured by the Taylor deformation parameter and the stress tensor. Besides a theoretical interest on its own, our results can potentially stimulate further experiments, as most of the predictions could be tested in the lab by monitoring droplets shapes and position over time.
△ Less
Submitted 7 November, 2019;
originally announced November 2019.
-
Disordered interfaces in soft fluids with suspended colloids
Authors:
Adriano Tiribocchi,
Marco Lauricella,
Andrea Montessori,
Simone Melchionna,
Sauro Succi
Abstract:
Computer simulations of bi-continuous two-phase fluids with intersparsed dumbbells show that, unlike rigid colloids, soft dumbbells do not lead to arrested coarsening. However, they significantly alter the curvature dynamics of the fluid-fluid interface, whose probability density distributions are shown to exhibit (i) a universal spontaneous transition from an initial broad-shape distribution towa…
▽ More
Computer simulations of bi-continuous two-phase fluids with intersparsed dumbbells show that, unlike rigid colloids, soft dumbbells do not lead to arrested coarsening. However, they significantly alter the curvature dynamics of the fluid-fluid interface, whose probability density distributions are shown to exhibit (i) a universal spontaneous transition from an initial broad-shape distribution towards a highly localized one and (ii) super-diffusive dynamics with long-range effects. Both features may prove useful for the design of novel families of soft porous materials.
△ Less
Submitted 13 March, 2019;
originally announced March 2019.
-
Mesoscale modelling of soft flowing crystals
Authors:
Andrea Montessori,
Marco Lauricella,
Sauro Succi
Abstract:
We outline the main ideas behind the numerical modelling of soft-flowing crystals, with special attention to their application to microfluidic devices for the design of novel mesoscale porous materials.
We outline the main ideas behind the numerical modelling of soft-flowing crystals, with special attention to their application to microfluidic devices for the design of novel mesoscale porous materials.
△ Less
Submitted 14 July, 2018;
originally announced July 2018.
-
Mesoscopic model for soft flowing systems with tunable viscosity ratio
Authors:
Linlin Fei,
Andrea Scagliarini,
Andrea Montessori,
Marco Lauricella,
Sauro Succi,
Kai H. Luo
Abstract:
We propose a mesoscopic model of binary fluid mixtures with tunable viscosity ratio based on a two-range pseudo-potential lattice Boltzmann method, for the simulation of soft flowing systems. In addition to the short range repulsive interaction between species in the classical single-range model, a competing mechanism between the short-range attractive and mid-range repulsive interactions is impos…
▽ More
We propose a mesoscopic model of binary fluid mixtures with tunable viscosity ratio based on a two-range pseudo-potential lattice Boltzmann method, for the simulation of soft flowing systems. In addition to the short range repulsive interaction between species in the classical single-range model, a competing mechanism between the short-range attractive and mid-range repulsive interactions is imposed within each species. Besides extending the range of attainable surface tension as compared with the single-range model, the proposed scheme is also shown to achieve a positive disjoining pressure, independently of the viscosity ratio. The latter property is crucial for many microfluidic applications involving a collection of disperse droplets with a different viscosity from the continuum phase. As a preliminary application, the relative effective viscosity of a pressure-driven emulsion in a planar channel is computed.
△ Less
Submitted 19 October, 2020; v1 submitted 18 June, 2018;
originally announced June 2018.
-
Effects of Nanoparticles on the Dynamic Morphology of Electrified Jets
Authors:
Marco Lauricella,
Dario Pisignano,
Sauro Succi
Abstract:
We investigate the effects of nanoparticles on the onset of varicose and whipping instabilities in the dynamics of electrified jets. In particular, we show that the non-linear interplay between the mass of the nanoparticles and electrostatic instabilities, gives rise to qualitative changes of the dynamic morphology of the jet, which in turn, drastically affect the final deposition pattern in elect…
▽ More
We investigate the effects of nanoparticles on the onset of varicose and whipping instabilities in the dynamics of electrified jets. In particular, we show that the non-linear interplay between the mass of the nanoparticles and electrostatic instabilities, gives rise to qualitative changes of the dynamic morphology of the jet, which in turn, drastically affect the final deposition pattern in electrospinning experiments. It is also shown that even a tiny amount of excess mass, of the order of a few percent, may more than double the radius of the electrospun fiber, with substantial implications for the design of experiments involving electrified jets as well as spun organic fibers.
△ Less
Submitted 12 October, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Effects of Orthogonal Rotating Electric Fields on Electrospinning Process
Authors:
Marco Lauricella,
Federico Cipolletta,
Giuseppe Pontrelli,
Dario Pisignano,
Sauro Succi
Abstract:
Electrospinning is a nanotechnology process whereby an external electric field is used to accelerate and stretch a charged polymer jet, so as to produce fibers with nanoscale diameters. In quest of a further reduction in the cross section of electrified jets hence of a better control on the morphology of the resulting electrospun fibers, we explore the effects of an external rotating electric fiel…
▽ More
Electrospinning is a nanotechnology process whereby an external electric field is used to accelerate and stretch a charged polymer jet, so as to produce fibers with nanoscale diameters. In quest of a further reduction in the cross section of electrified jets hence of a better control on the morphology of the resulting electrospun fibers, we explore the effects of an external rotating electric field orthogonal to the jet direction. Through extensive particle simulations, it is shown that by a proper tuning of the electric field amplitude and frequency, a reduction of up to a $30 \%$ in the aforementioned radius can be obtained, thereby opening new perspectives in the design of future ultra-thin electrospun fibres. Applications can be envisaged in the fields of nanophotonic components as well as for designing new and improved filtration materials.
△ Less
Submitted 4 September, 2017; v1 submitted 3 October, 2016;
originally announced October 2016.
-
Three-Dimensional Model for Electrospinning Processes in Controlled Gas Counterflow
Authors:
Marco Lauricella,
Dario Pisignano,
Sauro Succi
Abstract:
We study the effects of a controlled gas flow on the dynamics of electrified jets in the electrospinning process. The main idea is to model the air drag effects of the gas flow by using a non-linear Langevin-like approach. The model is employed to investigate the dynamics of electrified polymer jets at different conditions of air drag force, showing that a controlled gas counterflow can lead to a…
▽ More
We study the effects of a controlled gas flow on the dynamics of electrified jets in the electrospinning process. The main idea is to model the air drag effects of the gas flow by using a non-linear Langevin-like approach. The model is employed to investigate the dynamics of electrified polymer jets at different conditions of air drag force, showing that a controlled gas counterflow can lead to a decrease of the average diameter of electrospun fibers, and potentially to an improvement of the quality of electrospun products. We probe the influence of air drag effects on the bending instabilities of the jet and on its angular fluctuations during the process. The insights provided by this study might prove useful for the design of future electrospinning experiments and polymer nanofiber materials.
△ Less
Submitted 29 February, 2016;
originally announced March 2016.
-
JETSPIN: a specific-purpose open-source software for simulations of nanofiber electrospinning
Authors:
Marco Lauricella,
Giuseppe Pontrelli,
Ivan Coluzza,
Dario Pisignano,
Sauro Succi
Abstract:
We present the open-source computer program JETSPIN, specifically designed to simulate the electrospinning process of nanofibers. Its capabilities are shown with proper reference to the underlying model, as well as a description of the relevant input variables and associated test-case simulations. The various interactions included in the electrospinning model implemented in JETSPIN are discussed i…
▽ More
We present the open-source computer program JETSPIN, specifically designed to simulate the electrospinning process of nanofibers. Its capabilities are shown with proper reference to the underlying model, as well as a description of the relevant input variables and associated test-case simulations. The various interactions included in the electrospinning model implemented in JETSPIN are discussed in detail. The code is designed to exploit different computational architectures, from single to parallel processor workstations. This paper provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
The JETSPIN User Manual (Version 1.20)
Authors:
Marco Lauricella,
Giuseppe Pontrelli,
Ivan Coluzza,
Dario Pisignano,
Sauro Succi
Abstract:
JETSPIN is an open-source computer program specifically designed to simulate the electrospinning process of nanofibers. This manual provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability. The code is designed to exploit different computational architectures, from single to parallel processor workstations.
JETSPIN is an open-source computer program specifically designed to simulate the electrospinning process of nanofibers. This manual provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability. The code is designed to exploit different computational architectures, from single to parallel processor workstations.
△ Less
Submitted 23 July, 2015;
originally announced July 2015.
-
Sub-ms dynamics of the instability onset of electrospinning
Authors:
Martina Montinaro,
Vito Fasano,
Maria Moffa,
Andrea Camposeo,
Luana Persano,
Marco Lauricella,
Sauro Succi,
Dario Pisignano
Abstract:
Electrospun polymer jets are imaged for the first time at an ultra-high rate of 10,000 frames per second, investigating the process dynamics, and the instability propagation velocity and displacement in space. The polymer concentration, applied voltage bias and needle-collector distance are systematically varied, and their influence on the instability propagation velocity and on the jet angular fl…
▽ More
Electrospun polymer jets are imaged for the first time at an ultra-high rate of 10,000 frames per second, investigating the process dynamics, and the instability propagation velocity and displacement in space. The polymer concentration, applied voltage bias and needle-collector distance are systematically varied, and their influence on the instability propagation velocity and on the jet angular fluctuations analyzed. This allows us to unveil the instability formation and cycling behavior, and its exponential growth at the onset, exhibiting radial growth rates of the order of 10^3 s^-1. Allowing the conformation and evolution of polymeric solutions to be studied in depth, high-speed imaging at sub-ms scale shows a significant potential for improving the fundamental knowledge of electrified jets, leading to obtain finely controllable bending and solution stretching in electrospinning, and consequently better designed nanofibers morphologies and structures.
△ Less
Submitted 1 May, 2015; v1 submitted 10 April, 2015;
originally announced April 2015.
-
Non-linear Langevin model for the early-stage dynamics of electrospinning jets
Authors:
Marco Lauricella,
Giuseppe Pontrelli,
Dario Pisignano,
Sauro Succi
Abstract:
We present a non-linear Langevin model to investigate the early-stage dynamics of electrified polymer jets in electrospinning experiments. In particular, we study the effects of air drag force on the uniaxial elongation of the charged jet, right after ejection from the nozzle. Numerical simulations show that the elongation of the jet filament close to the injection point is significantly affected…
▽ More
We present a non-linear Langevin model to investigate the early-stage dynamics of electrified polymer jets in electrospinning experiments. In particular, we study the effects of air drag force on the uniaxial elongation of the charged jet, right after ejection from the nozzle. Numerical simulations show that the elongation of the jet filament close to the injection point is significantly affected by the non-linear drag exerted by the surrounding air. These result provide useful insights for the optimal design of current and future electrospinning experiments.
△ Less
Submitted 18 March, 2015;
originally announced March 2015.
-
Different regimes of the uniaxial elongation of electrically charged viscoelastic jets due to dissipative air drag
Authors:
Marco Lauricella,
Giuseppe Pontrelli,
Ivan Coluzza,
Dario Pisignano,
Sauro Succi
Abstract:
We investigate the effects of dissipative air drag on the dynamics of electrified jets in the initial stage of the electrospinning process. The main idea is to use a Brownian noise to model air drag effects on the uniaxial elongation of the jets. The developed numerical model is used to probe the dynamics of electrified polymer jets at different conditions of air drag force, showing that the dynam…
▽ More
We investigate the effects of dissipative air drag on the dynamics of electrified jets in the initial stage of the electrospinning process. The main idea is to use a Brownian noise to model air drag effects on the uniaxial elongation of the jets. The developed numerical model is used to probe the dynamics of electrified polymer jets at different conditions of air drag force, showing that the dynamics of the charged jet is strongly biased by the presence of air drag forces. This study provides prospective beneficial implications for improving forthcoming electrospinning experiments.
△ Less
Submitted 1 July, 2015; v1 submitted 16 March, 2015;
originally announced March 2015.
