-
Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device
Authors:
Morteza Aghaee,
Alejandro Alcaraz Ramirez,
Zulfi Alam,
Rizwan Ali,
Mariusz Andrzejczuk,
Andrey Antipov,
Mikhail Astafev,
Amin Barzegar,
Bela Bauer,
Jonathan Becker,
Umesh Kumar Bhaskar,
Alex Bocharov,
Srini Boddapati,
David Bohn,
Jouri Bommer,
Leo Bourdet,
Arnaud Bousquet,
Samuel Boutin,
Lucas Casparis,
Benjamin James Chapman,
Sohail Chatoor,
Anna Wulff Christensen,
Cassandra Chua,
Patrick Codd,
William Cole
, et al. (137 additional authors not shown)
Abstract:
The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostruct…
▽ More
The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%.
△ Less
Submitted 2 April, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Miniaturizing transmon qubits using van der Waals materials
Authors:
Abhinandan Antony,
Martin V. Gustafsson,
Guilhem J. Ribeill,
Matthew Ware,
Anjaly Rajendran,
Luke C. G. Govia,
Thomas A. Ohki,
Takashi Taniguchi,
Kenji Watanabe,
James Hone,
Kin Chung Fong
Abstract:
Quantum computers can potentially achieve an exponential speedup versus classical computers on certain computational tasks, as recently demonstrated in systems of superconducting qubits. However, these qubits have large footprints due to their large capacitor electrodes needed to suppress losses by avoiding dielectric materials. This tactic hinders scaling by increasing parasitic coupling among ci…
▽ More
Quantum computers can potentially achieve an exponential speedup versus classical computers on certain computational tasks, as recently demonstrated in systems of superconducting qubits. However, these qubits have large footprints due to their large capacitor electrodes needed to suppress losses by avoiding dielectric materials. This tactic hinders scaling by increasing parasitic coupling among circuit components, degrading individual qubit addressability, and limiting the spatial density of qubits. Here, we take advantage of the unique properties of the van der Waals (vdW) materials to reduce the qubit area by a factor of $>1000$ while preserving the required capacitance without increasing substantial loss. Our qubits combine conventional aluminum-based Josephson junctions with parallel-plate capacitors composed of crystalline layers of superconducting niobium diselenide (NbSe$_2$) and insulating hexagonal-boron nitride (hBN). We measure a vdW transmon $T_1$ relaxation time of 1.06 $μ$s, which demonstrates a path to achieve high-qubit-density quantum processors with long coherence times, and illustrates the broad utility of layered heterostructures in low-loss, high-coherence quantum devices.
△ Less
Submitted 13 May, 2022; v1 submitted 6 September, 2021;
originally announced September 2021.
-
Making high-quality quantum microwave devices with van der Waals superconductors
Authors:
Abhinandan Antony,
Martin V. Gustafsson,
Anjaly Rajendran,
Avishai Benyamini,
Guilhem Ribeill,
Thomas A. Ohki,
James Hone,
Kin Chung Fong
Abstract:
Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and char…
▽ More
Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe$_2$ that achieve a quality factor $Q > 10^5$. This value sets an upper bound that corresponds to a resistance of $\leq 192 μΩ$ when considering the additional loss introduced by integrating NbSe$_2$ into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.
△ Less
Submitted 27 November, 2021; v1 submitted 19 July, 2021;
originally announced July 2021.
-
Nonlinear input transformations are ubiquitous in quantum reservoir computing
Authors:
L. C. G. Govia,
G. J. Ribeill,
G. E. Rowlands,
T. A. Ohki
Abstract:
The nascent computational paradigm of quantum reservoir computing presents an attractive use of near-term, noisy-intermediate-scale quantum processors. To understand the potential power and use cases of quantum reservoir computing, it is necessary to define a conceptual framework to separate its constituent components and determine their impacts on performance. In this manuscript, we utilize such…
▽ More
The nascent computational paradigm of quantum reservoir computing presents an attractive use of near-term, noisy-intermediate-scale quantum processors. To understand the potential power and use cases of quantum reservoir computing, it is necessary to define a conceptual framework to separate its constituent components and determine their impacts on performance. In this manuscript, we utilize such a framework to isolate the input encoding component of contemporary quantum reservoir computing schemes. We find that across the majority of schemes the input encoding implements a nonlinear transformation on the input data. As nonlinearity is known to be a key computational resource in reservoir computing, this calls into question the necessity and function of further, post-input, processing. Our findings will impact the design of future quantum reservoirs, as well as the interpretation of results and fair comparison between proposed designs.
△ Less
Submitted 30 June, 2021;
originally announced July 2021.
-
Reservoir Computing with Superconducting Electronics
Authors:
Graham E. Rowlands,
Minh-Hai Nguyen,
Guilhem J. Ribeill,
Andrew P. Wagner,
Luke C. G. Govia,
Wendson A. S. Barbosa,
Daniel J. Gauthier,
Thomas A. Ohki
Abstract:
The rapidity and low power consumption of superconducting electronics makes them an ideal substrate for physical reservoir computing, which commandeers the computational power inherent to the evolution of a dynamical system for the purposes of performing machine learning tasks. We focus on a subset of superconducting circuits that exhibit soliton-like dynamics in simple transmission line geometrie…
▽ More
The rapidity and low power consumption of superconducting electronics makes them an ideal substrate for physical reservoir computing, which commandeers the computational power inherent to the evolution of a dynamical system for the purposes of performing machine learning tasks. We focus on a subset of superconducting circuits that exhibit soliton-like dynamics in simple transmission line geometries. With numerical simulations we demonstrate the effectiveness of these circuits in performing higher-order parity calculations and channel equalization at rates approaching 100 Gb/s. The availability of a proven superconducting logic scheme considerably simplifies the path to a fully integrated reservoir computing platform and makes superconducting reservoirs an enticing substrate for high rate signal processing applications.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Josephson-junction infrared single-photon detector
Authors:
Evan D. Walsh,
Woochan Jung,
Gil-Ho Lee,
Dmitri K. Efetov,
Bae-Ian Wu,
K. -F. Huang,
Thomas A. Ohki,
Takashi Taniguchi,
Kenji Watanabe,
Philip Kim,
Dirk Englund,
Kin Chung Fong
Abstract:
Josephson junctions (JJs) are ubiquitous superconducting devices, enabling high sensitivity magnetometers and voltage amplifiers, as well as forming the basis of high performance cryogenic computer and superconducting quantum computers. While JJ performance can be degraded by quasiparticles (QPs) formed from broken Cooper pairs, this phenomenon also opens opportunities to sensitively detect electr…
▽ More
Josephson junctions (JJs) are ubiquitous superconducting devices, enabling high sensitivity magnetometers and voltage amplifiers, as well as forming the basis of high performance cryogenic computer and superconducting quantum computers. While JJ performance can be degraded by quasiparticles (QPs) formed from broken Cooper pairs, this phenomenon also opens opportunities to sensitively detect electromagnetic radiation. Here we demonstrate single near-infrared photon detection by coupling photons to the localized surface plasmons of a graphene-based JJ. Using the photon-induced switching statistics of the current-biased JJ, we reveal the critical role of QPs generated by the absorbed photon in the detection mechanism. The photon-sensitive JJ will enable a high-speed, low-power optical interconnect for future JJ-based computing architectures.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Quantum reservoir computing with a single nonlinear oscillator
Authors:
L. C. G. Govia,
G. J. Ribeill,
G. E. Rowlands,
H. K. Krovi,
T. A. Ohki
Abstract:
Realizing the promise of quantum information processing remains a daunting task, given the omnipresence of noise and error. Adapting noise-resilient classical computing modalities to quantum mechanics may be a viable path towards near-term applications in the noisy intermediate-scale quantum era. Here, we propose continuous variable quantum reservoir computing in a single nonlinear oscillator. Thr…
▽ More
Realizing the promise of quantum information processing remains a daunting task, given the omnipresence of noise and error. Adapting noise-resilient classical computing modalities to quantum mechanics may be a viable path towards near-term applications in the noisy intermediate-scale quantum era. Here, we propose continuous variable quantum reservoir computing in a single nonlinear oscillator. Through numerical simulation of our model we demonstrate quantum-classical performance improvement, and identify its likely source: the nonlinearity of quantum measurement. Beyond quantum reservoir computing, this result may impact the interpretation of results across quantum machine learning. We study how the performance of our quantum reservoir depends on Hilbert space dimension, how it is impacted by injected noise, and briefly comment on its experimental implementation. Our results show that quantum reservoir computing in a single nonlinear oscillator is an attractive modality for quantum computing on near-term hardware.
△ Less
Submitted 30 April, 2020;
originally announced April 2020.
-
Demonstration of a superconducting nanowire microwave switch
Authors:
Andrew Wagner,
Leonardo Ranzani,
Guilhem Ribeill,
Tom Ohki
Abstract:
The functionality of a nanowire integrated into a superconducting transmission line acting as a single pole single throw switch is demonstrated. The switch has an instantaneous bandwidth from 2 to 8 GHz with more than 10 dB of isolation between the open and closed states. The switch consumes no power in the closed state and $\approx 15~\rm{nW}$ in the open state. The rise and fall response time be…
▽ More
The functionality of a nanowire integrated into a superconducting transmission line acting as a single pole single throw switch is demonstrated. The switch has an instantaneous bandwidth from 2 to 8 GHz with more than 10 dB of isolation between the open and closed states. The switch consumes no power in the closed state and $\approx 15~\rm{nW}$ in the open state. The rise and fall response time between open and closed states is approximately $370~\rm{ps}$.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Nanosecond Reversal of Three-Terminal Spin Hall Effect Memories Sustained at Cryogenic Temperatures
Authors:
Graham E. Rowlands,
Minh-Hai Nguyen,
Sriharsha V. Aradhya,
Shengjie Shi,
Colm A. Ryan,
Robert A. Buhrman,
Thomas A. Ohki
Abstract:
We characterize the nanosecond pulse switching performance of the three-terminal magnetic tunnel junctions (MTJs), driven by the spin Hall effect (SHE) in the channel, at a cryogenic temperature of 3 K. The SHE-MTJ devices exhibit reasonable magnetic switching and reliable current switching by as short pulses as 1 ns of $<10^{12}$ A/m$^{2}$ magnitude, exceeding the expectation from conventional ma…
▽ More
We characterize the nanosecond pulse switching performance of the three-terminal magnetic tunnel junctions (MTJs), driven by the spin Hall effect (SHE) in the channel, at a cryogenic temperature of 3 K. The SHE-MTJ devices exhibit reasonable magnetic switching and reliable current switching by as short pulses as 1 ns of $<10^{12}$ A/m$^{2}$ magnitude, exceeding the expectation from conventional macrospin model. The pulse switching bit error rates reach below $10^{-6}$ for < 10 ns pulses. Similar performance is achieved with exponentially decaying pulses expected to be delivered to the SHE-MTJ device by a nanocryotron device in parallel configuration of a realistic memory cell structure. These results suggest the viability of the SHE-MTJ structure as a cryogenic memory element for exascale superconducting computing systems.
△ Less
Submitted 23 September, 2019;
originally announced September 2019.
-
Graphene-based Josephson junction microwave bolometer
Authors:
Gil-Ho Lee,
Dmitri K. Efetov,
Woochan Jung,
Leonardo Ranzani,
Evan D. Walsh,
Thomas A. Ohki,
Takashi Taniguchi,
Kenji Watanabe,
Philip Kim,
Dirk Englund,
Kin Chung Fong
Abstract:
Sensitive microwave detectors are critical instruments in radioastronomy, dark matter axion searches, and superconducting quantum information science. The conventional strategy towards higher-sensitivity bolometry is to nanofabricate an ever-smaller device to augment the thermal response. However, this direction is increasingly more difficult to obtain efficient photon coupling and maintain the ma…
▽ More
Sensitive microwave detectors are critical instruments in radioastronomy, dark matter axion searches, and superconducting quantum information science. The conventional strategy towards higher-sensitivity bolometry is to nanofabricate an ever-smaller device to augment the thermal response. However, this direction is increasingly more difficult to obtain efficient photon coupling and maintain the material properties in a device with a large surface-to-volume ratio. Here we advance this concept to an ultimately thin bolometric sensor based on monolayer graphene. To utilize its minute electronic specific heat and thermal conductivity, we develop a superconductor-graphene-superconductor (SGS) Josephson junction bolometer embedded in a microwave resonator of resonant frequency 7.9 GHz with over 99\% coupling efficiency. From the dependence of the Josephson switching current on the operating temperature, charge density, input power, and frequency, we demonstrate a noise equivalent power (NEP) of 7 $\times 10^{-19}$ W/Hz$^{1/2}$, corresponding to an energy resolution of one single photon at 32 GHz and reaching the fundamental limit imposed by intrinsic thermal fluctuation at 0.19 K.
△ Less
Submitted 4 November, 2020; v1 submitted 11 September, 2019;
originally announced September 2019.
-
Sub-nanosecond switching in a cryogenic spin-torque spin-valve memory element with a dilute permalloy free layer
Authors:
Laura Rehm,
Volker Sluka,
Graham E. Rowlands,
Minh-Hai Nguyen,
Thomas A. Ohki,
Andrew D. Kent
Abstract:
We present a study of the pulsed current switching characteristics of spin-valve nanopillars with in-plane magnetized dilute permalloy and undiluted permalloy free layers in the ballistic regime at low temperature. The dilute permalloy free layer device switches much faster: the characteristic switching time for a permalloy free (Ni0.83Fe0.17) layer device is 1.18 ns, while that for a dilute perma…
▽ More
We present a study of the pulsed current switching characteristics of spin-valve nanopillars with in-plane magnetized dilute permalloy and undiluted permalloy free layers in the ballistic regime at low temperature. The dilute permalloy free layer device switches much faster: the characteristic switching time for a permalloy free (Ni0.83Fe0.17) layer device is 1.18 ns, while that for a dilute permalloy ([Ni0.83Fe0.17]0.6Cu0.4) free layer device is 0.475 ns. A ballistic macrospin model can capture the data trends with a reduced spin torque asymmetry parameter, reduced spin polarization and increased Gilbert damping for the dilute permalloy free layer relative to the permalloy devices. Our study demonstrates that reducing the magnetization of the free layer increases the switching speed while greatly reducing the switching energy and shows a promising route toward even lower power magnetic memory devices compatible with superconducting electronics.
△ Less
Submitted 30 May, 2019;
originally announced May 2019.
-
Coherent spin-transfer precession switching in orthogonal spin-torque devices
Authors:
Graham E. Rowlands,
Colm A. Ryan,
Li Ye,
Laura Rehm,
Daniele Pinna,
Andrew D. Kent,
Thomas A. Ohki
Abstract:
We present experimental results and macrospin simulations of the switching characteristics of orthogonal spin-transfer devices incorporating an out-of-plane magnetized polarizing layer and an in-plane magnetized spin valve device at cryogenic temperatures. At $T=4$ K we demonstrate: high speed deterministic switching at short pulse lengths - down to 100 ps - with sufficient measurement statistics…
▽ More
We present experimental results and macrospin simulations of the switching characteristics of orthogonal spin-transfer devices incorporating an out-of-plane magnetized polarizing layer and an in-plane magnetized spin valve device at cryogenic temperatures. At $T=4$ K we demonstrate: high speed deterministic switching at short pulse lengths - down to 100 ps - with sufficient measurement statistics to establish a switching error rate of $10^{-5}$; coherent precessional switching at longer times; and ensemble decoherence effects at even longer times. Finite temperature macrospin models capture the precessional switching well but fail to fully reproduce all the decoherence and switching error behavior.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
Graphene-based Josephson junction single photon detector
Authors:
Evan D. Walsh,
Dmitri K. Efetov,
Gil-Ho Lee,
Mikkel Heuck,
Jesse Crossno,
Thomas A. Ohki,
Philip Kim,
Dirk Englund,
Kin Chung Fong
Abstract:
We propose to use graphene-based Josephson junctions (gJjs) to detect single photons in a wide electromagnetic spectrum from visible to radio frequencies. Our approach takes advantage of the exceptionally low electronic heat capacity of monolayer graphene and its constricted thermal conductance to its phonon degrees of freedom. Such a system could provide high sensitivity photon detection required…
▽ More
We propose to use graphene-based Josephson junctions (gJjs) to detect single photons in a wide electromagnetic spectrum from visible to radio frequencies. Our approach takes advantage of the exceptionally low electronic heat capacity of monolayer graphene and its constricted thermal conductance to its phonon degrees of freedom. Such a system could provide high sensitivity photon detection required for research areas including quantum information processing and radio-astronomy. As an example, we present our device concepts for gJj single photon detectors in both the microwave and infrared regimes. The dark count rate and intrinsic quantum efficiency are computed based on parameters from a measured gJj, demonstrating feasibility within existing technologies.
△ Less
Submitted 19 September, 2017; v1 submitted 28 March, 2017;
originally announced March 2017.
-
Reliable spin-transfer torque driven precessional magnetization reversal with an adiabatically decaying pulse
Authors:
Daniele Pinna,
Colm Ryan,
Thomas Ohki,
Andrew D. Kent
Abstract:
We show that a slowly decaying current pulse can lead to nearly deterministic precessional switching in the presence of noise. We consider a biaxial macrospin, with an easy axis in the plane and a hard axis out-of-the plane, typical of thin film nanomagnets patterned into asymmetric shapes. Out-of-plane precessional magnetization orbits are excited with a current pulse with a component of spin pol…
▽ More
We show that a slowly decaying current pulse can lead to nearly deterministic precessional switching in the presence of noise. We consider a biaxial macrospin, with an easy axis in the plane and a hard axis out-of-the plane, typical of thin film nanomagnets patterned into asymmetric shapes. Out-of-plane precessional magnetization orbits are excited with a current pulse with a component of spin polarization normal to the film plane. By numerically integrating the stochastic Landau-Lifshitz-Gilbert-Slonczewski equation we show that thermal noise leads to strong dephasing of the magnetization orbits. However, an adiabatically decreasing pulse amplitude overwhelmingly leads to magnetization reversal, with a final state that {\em only} depends on the pulse polarity, not on the pulse amplitude. We develop an analytic model to explain this phenomena and to determine the pulse decay time necessary for adiabatic magnetization relaxation and thus precessional magnetization switching.
△ Less
Submitted 11 January, 2016;
originally announced January 2016.
-
Observation of the Dirac fluid and the breakdown of the Wiedemann-Franz law in graphene
Authors:
Jesse Crossno,
Jing K. Shi,
Ke Wang,
Xiaomeng Liu,
Achim Harzheim,
Andrew Lucas,
Subir Sachdev,
Philip Kim,
Takashi Taniguchi,
Kenji Watanabe,
Thomas A. Ohki,
Kin Chung Fong
Abstract:
Interactions between particles in quantum many-body systems can lead to collective behavior described by hydrodynamics. One such system is the electron-hole plasma in graphene near the charge neutrality point which can form a strongly coupled Dirac fluid. This charge neutral plasma of quasi-relativistic fermions is expected to exhibit a substantial enhancement of the thermal conductivity, due to d…
▽ More
Interactions between particles in quantum many-body systems can lead to collective behavior described by hydrodynamics. One such system is the electron-hole plasma in graphene near the charge neutrality point which can form a strongly coupled Dirac fluid. This charge neutral plasma of quasi-relativistic fermions is expected to exhibit a substantial enhancement of the thermal conductivity, due to decoupling of charge and heat currents within hydrodynamics. Employing high sensitivity Johnson noise thermometry, we report the breakdown of the Wiedemann-Franz law in graphene, with a thermal conductivity an order of magnitude larger than the value predicted by Fermi liquid theory. This result is a signature of the Dirac fluid, and constitutes direct evidence of collective motion in a quantum electronic fluid.
△ Less
Submitted 15 September, 2015;
originally announced September 2015.
-
Development of high frequency and wide bandwidth Johnson noise thermometry
Authors:
Jesse Crossno,
Xiaomeng Liu,
Thomas A. Ohki,
Philip Kim,
Kin Chung Fong
Abstract:
We develop a high frequency, wide bandwidth radiometer operating at room temperature, which augments the traditional technique of Johnson noise thermometry for nanoscale thermal transport studies. Employing low noise amplifiers and an analog multiplier operating at 2~GHz, auto- and cross-correlated Johnson noise measurements are performed in the temperature range of 3 to 300~K, achieving a sensiti…
▽ More
We develop a high frequency, wide bandwidth radiometer operating at room temperature, which augments the traditional technique of Johnson noise thermometry for nanoscale thermal transport studies. Employing low noise amplifiers and an analog multiplier operating at 2~GHz, auto- and cross-correlated Johnson noise measurements are performed in the temperature range of 3 to 300~K, achieving a sensitivity of 5.5~mK (110 ppm) in 1 second of integration time. This setup allows us to measure the thermal conductance of a boron nitride encapsulated monolayer graphene device over a wide temperature range. Our data shows a high power law (T$^{\sim4}$) deviation from the Wiedemann-Franz law above T$\sim$100~K.
△ Less
Submitted 8 January, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
First-order sideband transitions with flux-driven asymmetric transmon qubits
Authors:
J. D. Strand,
Matthew Ware,
Félix Beaudoin,
T. A. Ohki,
B. R. Johnson,
Alexandre Blais,
B. L. T. Plourde
Abstract:
We demonstrate rapid, first-order sideband transitions between a superconducting resonator and a frequency-modulated transmon qubit. The qubit contains a substantial asymmetry between its Josephson junctions leading to a linear portion of the energy band near the resonator frequency. The sideband transitions are driven with a magnetic flux signal of a few hundred MHz coupled to the qubit. This mod…
▽ More
We demonstrate rapid, first-order sideband transitions between a superconducting resonator and a frequency-modulated transmon qubit. The qubit contains a substantial asymmetry between its Josephson junctions leading to a linear portion of the energy band near the resonator frequency. The sideband transitions are driven with a magnetic flux signal of a few hundred MHz coupled to the qubit. This modulates the qubit splitting at a frequency near the detuning between the dressed qubit and resonator frequencies, leading to rates up to 85 MHz for exchanging quanta between the qubit and resonator.
△ Less
Submitted 21 June, 2013; v1 submitted 3 January, 2013;
originally announced January 2013.
-
Long-lived, radiation-suppressed superconducting quantum bit in a planar geometry
Authors:
Martin Sandberg,
Michael R. Vissers,
Tom Ohki,
Jiansong Gao,
Jose Aumentado,
Martin Weides,
David P. Pappas
Abstract:
We present a superconducting qubit design that is fabricated in a 2D geometry over a superconducting ground plane to enhance the lifetime. The qubit is coupled to a microstrip resonator for readout. The circuit is fabricated on a silicon substrate using low loss, stoichiometric titanium nitride for capacitor pads and small, shadow-evaporated aluminum/aluminum-oxide junctions. We observe qubit rela…
▽ More
We present a superconducting qubit design that is fabricated in a 2D geometry over a superconducting ground plane to enhance the lifetime. The qubit is coupled to a microstrip resonator for readout. The circuit is fabricated on a silicon substrate using low loss, stoichiometric titanium nitride for capacitor pads and small, shadow-evaporated aluminum/aluminum-oxide junctions. We observe qubit relaxation and coherence times ($T_1$ and $T_2$) of 11.7 $\pm$ 0.2 $μ$s and 8.7 $\pm$ 0.3 $μ$s, respectively. Calculations show that the proximity of the superconducting plane suppresses the otherwise high radiation loss of the qubit. A significant increase in $T_1$ is projected for a reduced qubit-to-superconducting plane separation.
△ Less
Submitted 8 November, 2012;
originally announced November 2012.
-
Characterization of addressability by simultaneous randomized benchmarking
Authors:
Jay M. Gambetta,
A. D. Corcoles,
S. T. Merkel,
B. R. Johnson,
John A. Smolin,
Jerry M. Chow,
Colm A. Ryan,
Chad Rigetti,
S. Poletto,
Thomas A. Ohki,
Mark B. Ketchen,
M. Steffen
Abstract:
The control and handling of errors arising from cross-talk and unwanted interactions in multi-qubit systems is an important issue in quantum information processing architectures. We introduce a benchmarking protocol that provides information about the amount of addressability present in the system and implement it on coupled superconducting qubits. The protocol consists of randomized benchmarking…
▽ More
The control and handling of errors arising from cross-talk and unwanted interactions in multi-qubit systems is an important issue in quantum information processing architectures. We introduce a benchmarking protocol that provides information about the amount of addressability present in the system and implement it on coupled superconducting qubits. The protocol consists of randomized benchmarking each qubit individually and then simultaneously, and the amount of addressability is related to the difference of the average gate fidelities of those experiments. We present the results on two similar samples with different amounts of cross-talk and unwanted interactions, which agree with predictions based on simple models for the amount of residual coupling.
△ Less
Submitted 2 January, 2013; v1 submitted 27 April, 2012;
originally announced April 2012.
-
Coherence in a transmon qubit with epitaxial tunnel junctions
Authors:
Martin P. Weides,
Jeffrey S. Kline,
Michael R. Vissers,
Martin O. Sandberg,
David S. Wisbey,
Blake R. Johnson,
Thomas A. Ohki,
David P. Pappas
Abstract:
We developed transmon qubits based on epitaxial tunnel junctions and interdigitated capacitors. This multileveled qubit, patterned by use of all-optical lithography, is a step towards scalable qubits with a high integration density. The relaxation time T1 is .72-.86mu sec and the ensemble dephasing time T2 is slightly larger than T1. The dephasing time T2 (1.36mu sec) is nearly energy-relaxation-l…
▽ More
We developed transmon qubits based on epitaxial tunnel junctions and interdigitated capacitors. This multileveled qubit, patterned by use of all-optical lithography, is a step towards scalable qubits with a high integration density. The relaxation time T1 is .72-.86mu sec and the ensemble dephasing time T2 is slightly larger than T1. The dephasing time T2 (1.36mu sec) is nearly energy-relaxation-limited. Qubit spectroscopy yields weaker level splitting than observed in qubits with amorphous barriers in equivalent-size junctions. The qubit's inferred microwave loss closely matches the weighted losses of the individual elements (junction, wiring dielectric, and interdigitated capacitor), determined by independent resonator measurements.
△ Less
Submitted 9 December, 2011; v1 submitted 21 November, 2011;
originally announced November 2011.
-
Sub-micrometer epitaxial Josephson junctions for quantum circuits
Authors:
Jeffrey S. Kline,
Michael R. Vissers,
Fabio C. S. da Silva,
David S. Wisbey,
Martin Weides,
Terence J. Weir,
Benjamin Turek,
Danielle A. Braje,
William D. Oliver,
Yoni Shalibo,
Nadav Katz,
Blake R. Johnson,
Thomas A. Ohki,
David P. Pappas
Abstract:
We present a fabrication scheme and testing results for epitaxial sub-micrometer Josephson junctions. The junctions are made using a high-temperature (1170 K) "via process" yielding junctions as small as 0.8 mu m in diameter by use of optical lithography. Sapphire (Al2O3) tunnel-barriers are grown on an epitaxial Re/Ti multilayer base-electrode. We have fabricated devices with both Re and Al top e…
▽ More
We present a fabrication scheme and testing results for epitaxial sub-micrometer Josephson junctions. The junctions are made using a high-temperature (1170 K) "via process" yielding junctions as small as 0.8 mu m in diameter by use of optical lithography. Sapphire (Al2O3) tunnel-barriers are grown on an epitaxial Re/Ti multilayer base-electrode. We have fabricated devices with both Re and Al top electrodes. While room-temperature (295 K) resistance versus area data are favorable for both types of top electrodes, the low-temperature (50 mK) data show that junctions with the Al top electrode have a much higher subgap resistance. The microwave loss properties of the junctions have been measured by use of superconducting Josephson junction qubits. The results show that high subgap resistance correlates to improved qubit performance.
△ Less
Submitted 22 November, 2011; v1 submitted 8 August, 2011;
originally announced August 2011.