-
Quasiparticle and superfluid dynamics in Magic-Angle Graphene
Authors:
Elías Portolés,
Marta Perego,
Pavel A. Volkov,
Mathilde Toschini,
Yana Kemna,
Alexandra Mestre-Torà,
Giulia Zheng,
Artem O. Denisov,
Folkert K. de Vries,
Peter Rickhaus,
Takashi Taniguchi,
Kenji Watanabe,
J. H. Pixley,
Thomas Ihn,
Klaus Ensslin
Abstract:
Magic-Angle Twisted Bilayer Graphene shows a wide range of correlated phases which are electrostatically tunable. Despite a growing knowledge of the material, there is yet no consensus on the microscopic mechanisms driving its superconducting phase. In particular, elucidating the symmetry and formation mechanism of the superconducting phase may provide key insights for the understanding of unconve…
▽ More
Magic-Angle Twisted Bilayer Graphene shows a wide range of correlated phases which are electrostatically tunable. Despite a growing knowledge of the material, there is yet no consensus on the microscopic mechanisms driving its superconducting phase. In particular, elucidating the symmetry and formation mechanism of the superconducting phase may provide key insights for the understanding of unconventional, strongly coupled and topological superconductivity. A major obstacle to progress in this direction is that key thermodynamic properties, such as specific heat, electron-phonon coupling and superfluid stiffness, are extremely challenging to measure due to the 2D nature of the material and its relatively low energy scales. Here, we use a gate-defined, radio frequency-biased, Josephson junction to probe the electronic dynamics of magic-angle twisted bilayer graphene (MATBG). We reveal both the electronic quasiparticle dynamics, driven by their thermalization through phonon scattering, as well as the condensate dynamics, driven by the inertia of Cooper pairs. From these properties we recover the evolution of thermalization rates, and the superfluid stiffness across the phase diagram. Our findings favor an anisotropic or nodal pairing state and allow to estimate the strength of electron-phonon coupling. These results contribute to understanding the underlying mechanisms of superconductivity in MATBG while establishing an easy-to-implement method for characterizing thermal and superfluid properties of superconducting 2D materials.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Gate-defined superconducting channel in magic-angle twisted bilayer graphene
Authors:
Giulia Zheng,
Elías Portolés,
Alexandra Mestre-Torá,
Marta Perego,
Takashi Taniguchi,
Kenji Watanabe,
Peter Rickhaus,
Folkert K. de Vries,
Thomas Ihn,
Klaus Ensslin,
Shuichi Iwakiri
Abstract:
Magic-angle twisted bilayer graphene (MATBG) combines in one single material different phases like insulating, metallic and superconducting. These phases and their in-situ tunability make MATBG an important platform for the fabrication of superconducting devices. We realize a split gate-defined geometry which enables us to tune the width of a superconducting channel formed in MATBG. We observe a s…
▽ More
Magic-angle twisted bilayer graphene (MATBG) combines in one single material different phases like insulating, metallic and superconducting. These phases and their in-situ tunability make MATBG an important platform for the fabrication of superconducting devices. We realize a split gate-defined geometry which enables us to tune the width of a superconducting channel formed in MATBG. We observe a smooth transition from superconductivity to highly resistive transport by progressively reducing the channel width using the split gates or by reducing the density in the channel. Using the gate-defined constriction, we control the flow of the supercurrent, either guiding it through the constriction or throughout the whole device or even blocking its passage completely. This serves as a foundation for developing quantum constriction devices like superconducting quantum point contacts, quantum dots, and Cooper-pair boxes in MATBG.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Tunable quantum interferometer for correlated moiré electrons
Authors:
Shuichi Iwakiri,
Alexandra Mestre-Torà,
Elías Portolés,
Marieke Visscher,
Marta Perego,
Giulia Zheng,
Takashi Taniguchi,
Kenji Watanabe,
Manfred Sigrist,
Thomas Ihn,
Klaus Ensslin
Abstract:
Magic-angle twisted bilayer graphene (MATBG) can host an intriguing variety of gate-tunable correlated states, including superconducting and correlated insulator states. Junction-based superconducting devices, such as Josephson junctions and SQUIDs, have been introduced recently and enable the exploration of the charge, spin, and orbital nature of superconductivity and the coherence of moiré elect…
▽ More
Magic-angle twisted bilayer graphene (MATBG) can host an intriguing variety of gate-tunable correlated states, including superconducting and correlated insulator states. Junction-based superconducting devices, such as Josephson junctions and SQUIDs, have been introduced recently and enable the exploration of the charge, spin, and orbital nature of superconductivity and the coherence of moiré electrons in MATBG. However, complementary fundamental coherence effects - in particular, the Little-Parks effect in a superconducting and the Aharonov-Bohm effect in a normal conducting ring - remained to be observed. Here, we report the observation of both these phenomena in a single gate-defined ring device where we can embed a superconducting or normal conducting ring in a correlated or band insulator. We directly observe the Little-Parks effect in the superconducting phase diagram as a function of density and magnetic field, confirming the effective charge of $2e$. By measuring the Aharonov-Bohm effect, we find that in our device, the coherence length of normal conducting moiré electrons exceeds a few microns at 50 mK. Surprisingly, we also identify a regime characterized by $h/e$-periodic oscillations but with superconductor-like nonlinear transport. Taken together, these experiments establish a novel device platform in MATBG, and more generally in tunable 2D materials, to unravel the nature of superconductivity and other correlated quantum states in these materials.
△ Less
Submitted 14 August, 2023;
originally announced August 2023.
-
Effect of the Density of Reactive Sites in P(S-r-MMA) Film During Al2O3 Growth by Sequential Infiltration Synthesis
Authors:
Federica E. Caligiore,
Daniele Nazzari,
Elena Cianci,
Katia Sparnacci,
Michele Laus,
Michele Perego,
Gabriele Seguini
Abstract:
Sequential infiltration synthesis (SIS) consists in a controlled sequence of metal organic precursors and co-reactant vapor exposure cycles of polymer films. Two aspects characterize a SIS process: precursor molecule diffusion within the polymer matrix and precursor molecule entrapment into polymer films via chemical reaction. In this paper, we investigated SIS process for the alumina synthesis us…
▽ More
Sequential infiltration synthesis (SIS) consists in a controlled sequence of metal organic precursors and co-reactant vapor exposure cycles of polymer films. Two aspects characterize a SIS process: precursor molecule diffusion within the polymer matrix and precursor molecule entrapment into polymer films via chemical reaction. In this paper, we investigated SIS process for the alumina synthesis using trimethylaluminum (TMA) and H2O in thin films of poly(styrene-random-methyl methacrylate) (P(S-r-MMA)) with variable MMA content. The amount of alumina grown in the P(S-r-MMA) films linearly depends on MMA content. A relatively low concentration of MMA in the copolymer matrix is enough to guarantee the volumetric growth of alumina in the polymer film. In pure polystyrene, metal oxide seeds grow in the sub-surface region of the film. In-situ dynamic spectroscopic ellipsometry (SE) analyses provide quantitative information about TMA diffusivity in pristine P(S-r-MMA) matrices as a function of MMA fraction, allowing further insight into the process kinetics as a function of the density of reactive sites in the polymer film. This work improves the understanding of infiltration synthesis mechanism and provides a practical approach to potentially expand the library of polymers that can be effectively infiltrated by introducing reactive sites in the polymer chain.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Trimethylaluminum Diffusion in PMMA Thin Films during Sequential Infiltration Synthesis: In Situ Dynamic Spectroscopic Ellipsometric Investigation
Authors:
Elena Cianci,
Daniele Nazzari,
Gabriele Seguini,
Michele Perego
Abstract:
Sequential infiltration synthesis (SIS) provides a successful route to grow inorganic materials into polymeric films by penetrating of gaseous precursors into the polymer, both in order to enhance the functional properties of the polymer creating an organic-inorganic hybrid material, and to fabricate inorganic nanostructures when infiltrating in patterned polymer films or in selfassembled block co…
▽ More
Sequential infiltration synthesis (SIS) provides a successful route to grow inorganic materials into polymeric films by penetrating of gaseous precursors into the polymer, both in order to enhance the functional properties of the polymer creating an organic-inorganic hybrid material, and to fabricate inorganic nanostructures when infiltrating in patterned polymer films or in selfassembled block copolymers. A SIS process consists in a controlled sequence of metal organic precursor and co-reactant vapor exposure cycles of the polymer films in an atomic layer deposition (ALD) reactor. In this work, we present a study of the SIS process of alumina using trimethylaluminum (TMA) and H2O in various polymer films using in situ dynamic spectroscopic ellipsometry (SE). In situ dynamic SE enables time-resolved monitoring of the swelling of the polymer, which is relevant to the diffusion and retain of the metal precursor into the polymer itself. Different swelling behaviour of poly(methylmethacrylate) (PMMA) and polystyrene (PS) was observed when exposed to TMA vapor. PMMA films swell more significantly than PS films do, resulting in very different infiltrated Al2O3 thickness after polymer removal in O2 plasma. PMMA films reach different swollen states upon TMA exposure and reaction with H2O, depending on the TMA dose and on the purge duration after TMA exposure, which correspond to different amounts of metal precursor retained inside the polymer and converted to alumina. Diffusion coefficients of TMA in PMMA were extracted investigating the swelling of pristine PMMA films during TMA infiltration and shown to be dependent on polymer molecular weight. In situ dynamic SE monitoring allows to control the SIS process tuning it from an ALD-like process for long purge to a chemical vapour deposition - like process selectively confined inside the polymer films
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Ozone-based sequential infiltration synthesis of Al2O3 nanostructures in symmetric block copolymer
Authors:
Jacopo Frascaroli,
Elena Cianci,
Sabina Spiga,
Gabriele Seguini,
Michele Perego
Abstract:
Sequential infiltration synthesis (SIS) provides an original strategy to grow inorganic materials by infiltrating gaseous precursors in polymeric films. Combined with micro-phase separated nanostructures resulting from block copoly-mer (BCP) self-assembly, SIS selectively binds the precursors to only one domain mimicking the morphology of the original BCP template. This methodology represents a sm…
▽ More
Sequential infiltration synthesis (SIS) provides an original strategy to grow inorganic materials by infiltrating gaseous precursors in polymeric films. Combined with micro-phase separated nanostructures resulting from block copoly-mer (BCP) self-assembly, SIS selectively binds the precursors to only one domain mimicking the morphology of the original BCP template. This methodology represents a smart solution for the fabrication of inorganic nanostructures starting from self-assembled BCP thin films, in view of advanced lithographic application and of functional nanostructure synthesis. The SIS process using Trimethylaluminum (TMA) and H2O precursors in self-assembled PS-b-PMMA BCP thin films established as a model system, where the PMMA phase is selectively infiltrated. However the temperature range allowed by polymeric material restricts the available precursors to highly reactive reagents, such as TMA. In order to extend the SIS methodology and access a wide library of materials, a crucial step is the implementation of processes using reactive reagents that are fully compatible with the initial polymeric template. This work reports a comprehensive morphological (SEM, SE, AFM) and physico-chemical (XPS) investigation of alumina nanostructures synthesized by means of a SIS process using O3 as oxygen precursor in self-assembled PS-b-PMMA thin films with lamellar morphology. The comparison with the H2O-based SIS pro-cess validates the possibility to use O3 as oxygen precursor expanding the possible range of precursors for the fabrication of inorganic nanostructures.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Thermodynamic and ordering kinetics in asymmetric PS-b-PMMA block copolymer thin films
Authors:
Gabriele Seguini,
Fabio Zanenga,
Gianluca Cannetti,
Michele Perego
Abstract:
The ordering kinetics of standing cylinder-forming polystyrene-block-poly (methyl methacrylate) block copolymers (molecular weight: 39 kg/mol) close to the order-disorder transition is experimentally investigated following the temporal evolution of the correlation length at different annealing temperatures. The grow exponent of the grain coarsening process is determined to be 1/2, signature of a c…
▽ More
The ordering kinetics of standing cylinder-forming polystyrene-block-poly (methyl methacrylate) block copolymers (molecular weight: 39 kg/mol) close to the order-disorder transition is experimentally investigated following the temporal evolution of the correlation length at different annealing temperatures. The grow exponent of the grain coarsening process is determined to be 1/2, signature of a curvature driven ordering mechanism. The measured activation enthalpy and the resulting Meyer-Neldel temperature for this specific copolymer along with the data already known for PS-b-PMMA block copolymers in strong segregation limit, allows investigating the interplay between the ordering kinetics and the thermodynamic driving force during the grain coarsening. These findings unveil various phenomena concomitantly occurring during the thermally activated ordering kinetics at segmental, single chain, and collective level.
△ Less
Submitted 17 December, 2019;
originally announced December 2019.
-
Ordering kinetic in two-dimensional hexagonal pattern of cylinder-forming PS-b-PMMA block copolymer thin films: dependence on the segregation strength
Authors:
Gabriele Seguini,
Fabio Zanenga,
Michele Laus,
Michele Perego
Abstract:
This paper reports the experimental determination of the growth exponents and activation enthalpies for the ordering process of standing cylinder-forming all-organic polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) block copolymer (BCP) thin films as a function of the BCP degree of polymerization (N). The maximum growth exponent of 1/3 is observed for the smallest BCP at the border of the…
▽ More
This paper reports the experimental determination of the growth exponents and activation enthalpies for the ordering process of standing cylinder-forming all-organic polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) block copolymer (BCP) thin films as a function of the BCP degree of polymerization (N). The maximum growth exponent of 1/3 is observed for the smallest BCP at the border of the order disorder transition. Both the growth exponents and the activation enthalpies exponentially decrease with the BCP segregation strength (chi N) following the same path of the diffusivity.
△ Less
Submitted 9 May, 2018; v1 submitted 29 November, 2017;
originally announced November 2017.
-
The role of oxygen vacancies on the structure and the density of states of iron doped zirconia
Authors:
Davide Sangalli,
Alessio Lamperti,
Elena Cianci,
Roberta Ciprian,
Michele Perego,
Alberto Debernardi
Abstract:
In this paper we study, both with theoretical and experimental approach, the effect of iron doping in zirconia. Combining density functional theory (DFT) simulations with the experimental characterization of thin films, we show that iron is in the Fe3+ oxidation state and accordingly that the films are rich in oxygen vacancies (VO). VO favor the formation of the tetragonal phase in doped zirconia…
▽ More
In this paper we study, both with theoretical and experimental approach, the effect of iron doping in zirconia. Combining density functional theory (DFT) simulations with the experimental characterization of thin films, we show that iron is in the Fe3+ oxidation state and accordingly that the films are rich in oxygen vacancies (VO). VO favor the formation of the tetragonal phase in doped zirconia (ZrO2:Fe) and affect the density of state at the Fermi level as well as the local magnetization of Fe atoms. We also show that the Fe(2p) and Fe(3p) energy levels can be used as a marker for the presence of vacancies in the doped system. In particular the computed position of the Fe(3p) peak is strongly sensitive to the VO to Fe atoms ratio. A comparison of the theoretical and experimental Fe(3p) peak position suggests that in our films this ratio is close to 0.5. Besides the interest in the material by itself, ZrO2:Fe constitutes a test case for the application of DFT on transition metals embedded in oxides. In ZrO2:Fe the inclusion of the Hubbard U correction significantly changes the electronic properties of the system. However the inclusion of this correction, at least for the value U = 3.3 eV chosen in the present work, worsen the agreement with the measured photo-emission valence band spectra.
△ Less
Submitted 1 February, 2013; v1 submitted 6 June, 2012;
originally announced June 2012.
